Workshop Schedule April-June 2016

Transcription

1 Listing by Class Accident Investigation Roseburg 4/28/16 1 p.m. Astoria 5/11/16 8 a.m. Medford 6/23/16 8 a.m. Excavation Safety Salem 6/2/16 1 p.m. Fall Protection Milwaukie 5/26/16 1 p.m. Salem 6/2/16 8 a.m. Medford 6/23/16 1 p.m. Safety and the Supervisor Eugene 4/5/16 1 p.m. Klamath Falls 5/5/16 1 p.m. Ontario 6/15/16 1 p.m. Safety Meetings and Committees Astoria 5/11/16 1 p.m. Eugene 4/5/16 8 a.m. Klamath Falls 5/5/16 8 a.m. Roseburg 4/28/16 8 a.m. Ontario 6/15/16 8 a.m. Forklift Safety Milwaukie 5/26/16 8 a.m.

2 Listing by Location Astoria - Clatsop Community College 5/11/16 8 a.m. Accident Investigation 5/11/16 1 p.m. Safety Meetings and Committees Eugene Oregon OSHA Eugene Field Office 4/5/16 8 a.m. Safety Meetings and Committees 4/5/16 1 p.m. Safety and the Supervisor Klamath Falls- Klamath Falls Community College 5/5/16 8 a.m. Safety Meetings and Committees 5/5/16 1 p.m. Safety and the Supervisor Ontario - Treasure Valley Community College 6/15/16 8 a.m. Safety Meetings and Committees 6/15/16 1 p.m. Safety and the Supervisor Roseburg - Umpqua Community College Workforce Training Center 4/28/16 8 a.m. Safety Meetings and Committees 4/28/16 1 p.m. Accident Investigation Salem DCBS Labor & Industries Bldg. 6/2/16 8 a.m. Fall Protection 6/2/16 1 p.m. Excavation Safety Medford - SOU Small Business Development Center 6/23/16 8 a.m. Accident Investigation 6/23/16 1 p.m. Fall Protection Milwaukie Clackamas Community College 5/26/16 8 a.m. Forklift Safety 5/26/16 1 p.m. Fall Protection

3 Class Descriptions Attending an Oregon OSHA class helps you gain important knowledge and skills. The certificate should not be considered formal Oregon OSHA certification of professional competencies or qualifications. Accident Investigation You will learn about why investigations are important; and the process for conducting an accident investigation. This how-to class builds on the basic introduction in class Safety Meetings and Committees. Excavation Safety You will learn about: the role of the "competent person"; planning considerations; specific hazards resulting from excavation work; requirements for protective systems; and Oregon OSHA's soilclassification methods. Safety and the Supervisor You will learn about costs and benefits of taking corrective action; the five general safety supervision responsibilities outlined in OSHA rules. Through class discussion and group exercises, you learn about leadership that supports safe behaviors and conditions. Safety Meetings and Committees This introductory class discusses the role and purpose for the safety meeting and/or committee; employer and employee responsibilities; and safety committee training requirements. Fall Protection This class will discuss the Oregon OSHA rules for fall protection use in the construction industry and will provide specific tools to build a pro-active safety program. Falls are consistently one of the top ten injuries in Oregon and cost employers millions of dollars each year. The goal of the class is to increase personal knowledge about how to prevent falls. Forklift Safety You will learn about the OSHA rules for Powered Industrial Trucks and developing a forklift training program. This class does not offer forklift operator certification (cards).

4 Directions ASTORIA Clatsop Community College 1651 Lexington Ave From I5 N take Exit 36 for WA-432 W toward Longview/Long Beach/WA-4 W. Continue onto WA-432 W. Use the right lane to take the 3rd Ave/WA-411 ramp to Indust. Area/Port Longview. Turn left onto WA-411 S/3rd Ave. Continue onto Industrial Way. Use the left lane to turn left onto Oregon Way. Keep left to continue on WA-433 S/Oregon Way. Turn left onto 16 th St. Continue to Lexington Ave. EUGENE Oregon OSHA Field Office 1140 Willagillespie # From I-5 take Exit 195B west. Follow for 2.5 miles and take Delta Hwy exit. Go left at stop sign to Delta Hwy South, follow for about one mile to Valley River Center exit. Left on Valley River Dr and cross over Delta Hwy bridge. At signal, turn left on Willagillespie Rd. Go.1 mile to Delta Triad Building on left. Visitors MUST park in the lower lot. From the lower level, go up the stairs and turn to the right. Additional parking is available across the street in the adjacent church parking lot. KLAMATH FALLS Klamath Community College 7390 S 6th St From Hwy 97 North follow into Klamath Falls. Proceed to Hwy 39, Reno/Merrill. At the intersection of south 6th St, turn left and proceed to #7390. From Hwy 97 South follow to the Hwy 140 exit. At the stop sign, turn right. Follow the bypass until it intersects with Hwy 39. Turn left on south 6th St and proceed to #7390. MEDFORD SOU Small Business Development Center 101 S Bartlett St From South - Take Exit 27 towards OR-99S/Medford. Keep right at the fork and follow signs for Barnett Rd. Turn right onto Highland Dr and then left onto E Barnett Rd Follow E Barnett to S Riverside Ave and turn right. Turn left onto E 9th St and take the first right onto S Bartlett St. From North - Take Exit 30 for OR-62W towards Klamath Falls. Keep right at the fork and follow signs for OR-238/Medford. Turn right onto OR-62W/Crater Lake Hwy. Turn left at All American Tires onto OR-99S. Take a slight left onto N Central Ave and then a left onto E 8th St. Facility is on the right. Parking - Parking lots start at $0.50/hour to a $5.00/day maximum. Middleford and Evergreen garages offer 2-3 hours free prior to paying. ONTARIO Treasure Valley Community College 650 College Blvd From I-84 take Exit 376A (from north) or Exit 376B (from south). Bear right at the fork in the off ramp and continue to the stoplight. Turn right onto East Idaho Ave and continue straight under the railroad underpass to the second stoplight, and turn left onto SW 2nd St. Travel four blocks south to the stoplight at SW 4th Ave and turn right. Continue on 4th Ave to College Blvd. From Hwy 20, travel east out of Vale for about 12 miles. At the T at Cairo Junction, turn left at the flashing light. The road then becomes Hwy 201. Continue north for about 1.5 miles. After the sharp bend east, the road becomes SW 4th. Continue on 4th Ave to College Blvd. ROSEBURG Umpqua Community College Workforce Training Center 2555 Diamond Lake Blvd From I-5 take Exit 124 for OR-138 E toward City Center/ Diamond Lake. Turn right onto OR-138 E/W Harvard Ave. Use the left 2 lanes to turn left onto SE Stephens St. Turn right onto NE Diamond Lake Blvd. Continue straight to stay on NE Diamond Lake Blvd. The Workforce Training Center will be on the right. SALEM DCBS Labor & Industries Bldg. 350 Winter St NE From I-5 take Santiam Hwy (Exit 253). Go west on Mission St. Go past 17th St and onto the overpass. Get in right lane and take the Willamette University/City Center Exit. Follow signs to 12th St and State Offices. Turn left on Chemeketa, go straight through four-way stop intersection, and past the underground parking. Turn right on Winter St and the Labor & Industries Building is on the right. Limited parking is available. The Yellow lot, located north of the L&I Building, is $8.00 a day and accepts only debit/credit cards. There is also metered parking in the underground parking structure and in front of the L&I Building on the Winter St side. Metered parking is $1.50 an hour. Most on-street meters are only 2 hours and the vehicle must be moved after that time. MILWAUKIE Clackamas Community College 7738 SE Harmony Rd From I-205 South, take Exit 14 (Sunnyside Rd) and turn right (west). Sunnyside Rd becomes Harmony Rd at 82nd Ave. From I -205 North, take Exit 13, staying to the left for 82nd Ave, and turn left at the first light (Harmony Rd). CCC is ½ block west of 82nd Ave. Turn left (south) into the lot.

5 Registration Form Name: Company: Mailing Address: City: State: Zip: Phone: Fax: Address: What does your business do? Is your business or organization Native American/tribally owned: Yes No My business or organization has (statewide): fewer than 20 employees employees more than 50 employees Contact me with more information about free on-site consultations (a confidential service from Oregon OSHA): Yes No Class Title Date Location Please submit your registration only once, either online, by mail, or fax. Directions to the workshops will be sent with your confirmation. Online registration Mail or fax registration Questions or cancellations Click on Education Mail: Oregon OSHA Public Education P.O. Box Salem, OR Fax: Call: Salem Office: Toll-free: option 2