Safety Notices 安 全 通 知 和 标 签. Securite, Consignes et etiquettes. P/ACE MDQ plus Capillary Electrophoresis System

Transcription

1 Safety Notices 安 全 通 知 和 标 签 Securite, Consignes et etiquettes P/ACE MDQ plus Capillary Electrophoresis System B54626AA December 2014

2 Safety, Notices and Labels P/ACE MDQ plus Capillary Electrophoresis System PN B54626AA (December 2014) 2014 AB Sciex Pte. Ltd. All rights reserved. AB Sciex Pte. Ltd and its affiliates disclaims all warranties with respect to this document, expressed or implied, including but not limited to those of merchantability or fitness for a particular purpose. In no event shall AB Sciex Pte. Ltd. and its affiliates be liable, whether in contract, tort, warranty, or under any statute or on any other basis for special, incidental, indirect, punitive, multiple or consequential damages in connection with or arising from this document, including but not limited to the use thereof. Research use only. Not for use in diagnostic procedures. The trademarks mentioned herein are the property of the AB Sciex Pte. Ltd. or their respective owners. AB SCIEX is being used under license, and SCIEX Separations is a part of AB SCIEX. Find us on the World Wide Web at: Printed in USA AB Sciex 500 Old Connecticut Path Framingham, MA USA 01701

3 SCIEX Separations CE taken to the next level - expertise for more powerful separations Capillary electrophoresis (CE) is among the most powerful tools available to scientists today. SCIEX is expanding the power of this technology. Creating a new generation of CE separation systems and techniques, our advances in this area will continually lead complementary and orthogonal solutions that help drive breakthroughs by enabling scientists to address a wider range of analytical challenges. SCIEX Separations. Be part of it. For contact details and additional information please visit: B54626AA iii

4 Revision History Revision History Initial Issue, B54626AA, December 2014 P/ACE MDQ plus Software version 10.2.x (includes 32 Karat software) P/ACE MDQ plus Firmware version 10.2.x This document applies to the latest software and firmware listed above, and any higher subsequent versions. When a subsequent software or firmware version affects the information in this document, a new issue will be released to the SCIEX website. For updates, go to and download the latest version of the manual. iv B54626AA

5 Contents SCIEX Separations, iii CE taken to the next level - expertise for more powerful separations, iii SCIEX Separations. Be part of it., iii Revision History,iv Safety, Notices And Labels,1 Overview,1 Alerts for Warning, Caution, Important, and Note, 2 Instrument Safety Precautions, 3 Chemical and Biological Safety, 4 Moving Parts or Sharp Objects, 4 Disposal of Devices Containing Mercury Components, 4 Electrical Safety, 5 Laser Safety (For Optional Laser Device), 5 Safety Symbols and Labels, 6 High Voltage Electric Shock Risk Symbol, 6 Attention Safety Symbol, 6 Sharp Object Label, 6 Protective Earth Or Ground Terminal, 6 Fuse Warning Symbol, 7 Off Position Of Principal Power Switch, 7 On Position Of Principal Power Switch, 7 RoHS Notices, 8 China RoHS Caution Label, 8 China RoHS Environmental Label, 8 Other Instrument Labels, 9 Recycling Label (WEEE),9 CE Mark Label, 9 RCM Label, 10 CSA Mark Label, 10 v

6 vi Contents

7 Overview A description of the symbols and labels that are used on the SCIEX P/ACE MDQ plus Capillary Electrophoresis System, or that are shown in this manual, can be found in this section. Do not attempt to perform any procedure before carefully reading all instructions. If in doubt as to how to proceed in any situation, contact your SCIEX Representative. SCIEX urges its customers and employees to comply with all national health and safety standards such as the use of barrier protection. This may include, but is not limited to, protective eyewear, gloves, and suitable laboratory attire when operating or maintaining this or any other automated laboratory instrumentation. WARNING If the equipment is used in a manner not specified by SCIEX, the protection provided by the equipment may be impaired. B54626AA 1

8 Alerts for Warning, Caution, Important, and Note Alerts for Warning, Caution, Important, and Note All Warnings and Cautions in this document include an exclamation point, framed within a triangle. The exclamation point symbol is an international symbol which serves as a reminder that all safety instructions should be read and understood before installation, use, maintenance, and servicing are attempted. WARNING WARNING indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. It may also be used to indicate the possibility of erroneous data that could result in an incorrect determination. May be used to indicate the possibility of severe instrument damage. CAUTION CAUTION indicates a potentially hazardous situation, which, if not avoided, may result in minor or moderate injury. It may also be used to alert against unsafe practices. May be used to indicate the possibility of erroneous data that could result in an incorrect determination. IMPORTANT Used for comments that add value to the step or procedure being performed. Following the advice in the Important adds benefit to the performance of a piece of equipment or to a process. NOTE Used to call attention to notable information that should be followed during installation, use, or servicing of this equipment. 2 B54626AA

9 Instrument Safety Precautions Instrument Safety Precautions WARNING Risk of operator injury if: All doors, covers and panels are not closed and secured in place prior to and during instrument operation. The integrity of safety interlocks and sensors is compromised. You contact moving parts. You mishandle broken parts. Doors, covers and panels are not opened, closed, removed and/or replaced with care. Improper tools are used for troubleshooting. To avoid injury: Keep doors, covers and panels closed and secured in place while the instrument in use. Take full advantage of the safety features of the instrument. Do not defeat safety interlocks and sensors. Acknowledge and act upon instrument alarms and error messages. Keep away from moving parts. Report any broken parts to your SCIEX Representative. Use the proper tools when troubleshooting. CAUTION System integrity could be compromised and operational failures could occur if: This equipment is used in a manner other than specified. Operate the instrument as instructed in the Product Manuals. You introduce software that is not authorized by SCIEX into your computer. Only operate your system s computer with software authorized by SCIEX. You install software that is not an original copyrighted version. Only use software that is an original copyrighted version to prevent virus contamination. CAUTION If you purchased this product from anyone other than SCIEX or an authorized SCIEX distributor, and, if it is not presently under a SCIEX Service Maintenance Agreement, SCIEX cannot guarantee that the product is fitted with the most current mandatory engineering revisions or that you will receive the most current information bulletins concerning the product. If you purchased this product from a third party and would like further information concerning this topic, contact your SCIEX Representative. B54626AA 3

10 Chemical and Biological Safety Chemical and Biological Safety WARNING Normal operation of the system can involve the use of solvents and reagents that are toxic, flammable, or biologically harmful. Observe all precautionary information printed on the original solution containers. Operate the system in the appropriate environment. Take all necessary precautions when using pathology or toxic materials to prevent the generation of aerosols. Observe all applicable precautionary procedures when using flammable solvents in or near the instrument. Wear appropriate laboratory attire, for example, safety glasses, gloves, lab coat and breathing apparatus, when working with hazardous materials. Dispose of all waste solutions in a proper manner. Moving Parts or Sharp Objects WARNING Risk of personal injury. To avoid injury due to moving parts, observe the following: Never attempt to exchange labware, reagents, or tools while the instrument is operating. Never attempt to physically restrict any of the moving components of the instrument. Keep the instrument work area clear to prevent obstruction of the movement. Moving parts are limited to the sample handling system. Plate movement is safety interlocked through the sample access cover. To avoid injury due to moving parts, observe the following: Keep loose clothing and hair away from the plate area. Never attempt to physically restrict movement of the plate assembly. Disposal of Devices Containing Mercury Components This product may contain a mercury-added part. Recycle or dispose of according to local, state, or federal laws. It is very important that you understand and comply with the safe and proper disposal of devices containing mercury components (switch, lamp, battery, relay, or electrode). The mercury component indicator label can vary depending on the type of device. 4 B54626AA

11 Electrical Safety Electrical Safety WARNING A high voltage power supply is used with this instrument. Safety interlocks disable high-voltage output while the capillary access cover is open and remove the risk of shock while performing routine instrument functions. However, removal of any panel may expose an individual to the possibility of severe electrical shock and/or mechanical injury. For this reason, any service requiring removal of a panel or otherwise overriding or disabling safety interlocks must be done by SCIEX personnel only. To prevent electrically related injuries and property damage, properly inspect all electrical equipment prior to use and immediately report any electrical deficiencies. Contact a SCIEX Representative for any servicing of equipment requiring the removal of covers or panels. To reduce risk of electrical shock, all devices employ a three-wire electrical cable and plug to connect the equipment to earth ground. Ensure that the wall outlet receptacle is properly wired and earth grounded. DO NOT use a three-to-two wire plug adapter. DO NOT use a two-wire extension cord or a two-wire multiple-outlet power strip. Disconnect power to the system before performing maintenance. DO NOT remove any panels; panels should be removed only by qualified service personnel. Laser Safety (For Optional Laser Device) WARNING This product may contain a laser module. The laser (optional) is designated as Class 3B. The 3B classification means that direct intrabeam viewing of this type of laser is always hazardous to personnel. The laser (optional) and several other integral components are housed in a sealed container that together comprise the laser assembly. The laser assembly has no user serviceable parts. Service of the laser assembly is restricted to certified SCIEX field engineers. During normal operation of the system, laser light is not accessible to the user. Therefore, the overall laser classification of the CE Instrument is Class 1, defined as lasers which are safe under reasonably foreseeable conditions of operation. To prevent users from potentially harmful laser light, observe all safety warnings and NEVER REMOVE THE OUTER CASING OF THE LASER ASSEMBLY. IMPORTANT The laser markings noted above can vary depending on the type of device, and will be described in the documentation provided with the module. B54626AA 5

12 Safety Symbols and Labels Safety Symbols and Labels High Voltage Electric Shock Risk Symbol This symbol indicates that there is high voltage and there is a risk of electric shock, and the operator should use care when accessing this area. Attention Safety Symbol This symbol calls attention to important information to read, or is accompanied by another symbol indicating a particular safety hazard. The information is located either on the label with the symbol or in the P/ACE MDQ plus documentation. Sharp Object Label This symbol indicates that there are sharp objects, and the operator should use care when accessing this area. Protective Earth Or Ground Terminal This symbol identifies the location of the protective earth or ground terminal plug on the equipment. 6 B54626AA

13 Safety Symbols and Labels Fuse Warning Symbol This symbol indicates that the instrument fuse may be replaced only with the specified type and rating. Off Position Of Principal Power Switch This symbol graphically represents the equipment main power push-button switch when it is in the off position. On Position Of Principal Power Switch This symbol graphically represents the equipment main power push-button switch when it is in the on position. B54626AA 7

14 RoHS Notices RoHS Notices These labels and materials declaration table (the Table of Hazardous Substance s Name and Concentration) are to meet People s Republic of China Electronic Industry Standard SJ/T Marking for Control of Pollution Caused by Electronic Information Products requirements. China RoHS Caution Label This label indicates that the electronic information product contains certain toxic or hazardous substances. The center number is the Environmentally Friendly Use Period (EFUP) date, and indicates the number of calendar years the product can be in operation. Upon the expiration of the EFUP, the product must be immediately recycled. The circling arrows indicate the product is recyclable. The date code on the label or product indicates the date of manufacture. China RoHS Environmental Label This label indicates that the electronic information product does not contain any toxic or hazardous substances. The center e indicates the product is environmentally safe and does not have an Environmentally Friendly Use Period (EFUP) date. Therefore, it can safely be used indefinitely. The circling arrows indicate the product is recyclable. The date code on the label or product indicates the date of manufacture. 8 B54626AA

15 Other Instrument Labels Other Instrument Labels This section provides information for some labels and symbols appearing on the P/ACE MDQ plus instrument housing. These labels and symbols may be associated with user-serviceable procedures. Individual hazards associated with a specific procedure in this manual may use these labels and symbols, and are included in Warnings or Cautions within the procedures for that task. Recycling Label (WEEE) The symbol of a crossed-out wheeled bin on the product is required in accordance with the Waste Electrical and Electronic Equipment (WEEE) Directive of the European Union. The presence of this marking on the product indicates: That the device was put on the European Market after August 13, 2005 and That the device is not to be disposed via the municipal waste collection system of any member state of the European Union. For products under the requirement of WEEE directive, please contact your dealer or local Beckman Coulter office for the proper decontamination information and details on the take back program that facilitates proper collection, treatment, recovery, recycling, and safe disposal of this device. CE Mark Label The CE symbol is a conformity marking indicating that the P/ACE MDQ plus instrument meets the requirements of applicable European Conformity directives within the European Economic Area (EEA). B54626AA 9

16 Other Instrument Labels RCM Label The RCM symbol on the P/ACE MDQ plus instrument is an identification marking that indicates this instrument is compliant with with the Australian Communications and Media Authority s (ACMA) regulatory arrangements for telecommunications, radio, EMC and electromagnetic energy (EME) requirements. This symbol is required on this instrument for the Australian and New Zealand markets. CSA Mark Label The CSA symbol on the P/ACE MDQ plus instrument indicates that the instrument has been certified by a Nationally Recognized Testing laboratory (NRTL) to applicable Laboratory Equipment Safety Standards for the United States and Canada. 10 B54626AA

17

18