DALLAS/OUTDOOR BILLBOARD. Size: Substrate: 7 oz solid PVC vinyl Note: Eco Flex will not be accepted.

Transcription

1 Rev. MARCH h x 24 8 w 8 h x 24 w h x 24 w 24 8 Mechanical Recommended mechanical size: 8 h x 2w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

2 9 8 h x 20 8 w 9 h x 20 w h x 20 w 20 8 Suggested Mechanical Recommended mechanical size: 9.75 h x w crop marks. be provided. All images must be saved as CMYK. File Preparation: Macintosh platform preferred. Illustrator, Photoshop, InDesign, TIFF, JPEG, or PDF preferred. CMYK color space. There should be vertical seaming only and pockets should be heat seamed. pole pockets contained within the bleed on all four sides. All content is subject to the approval of.

3 DALLAS / OUTDOOR 11 2 h x 36 8 w 10 6 h x 36 w h x 36 w 36 8 Mechanical Recommended mechanical size: 10.5 h x 36 w File Preparation: Macintosh platform preferred. Illustrator, Photoshop, InDesign, TIFF, JPEG, or PDF preferred. CMYK color space. There should be vertical seaming only and pockets should be heat seamed. pole pockets contained within the bleed on all four sides. Overage: Contact for availability and specs. All content is subject to the approval of. Material must be received at least 10 working days before the installation at:

4 10 8 h x 25 8 w 10 h x 25 w h x 25 w 25 Mechanical Recommended mechanical size: 10 h x 25 w File Preparation: Macintosh platform preferred. Illustrator, Photoshop, InDesign, TIFF, JPEG, or PDF preferred. CMYK color space. There should be vertical seaming only and pockets should be heat seamed. pole pockets contained within the bleed on all four sides. All content is subject to the approval of.

5 10 8 h x 30 8 w 10 h x 30 w h x 30 w 30 8 Mechanical Recommended mechanical size: 10 h x 30 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

6 10 8 h x 40 8 w 10 h x 40 w h x 40 w 40 8 Mechanical Recommended mechanical size: 10 h x 40 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

7 12 8 h x 40 8 w 12 h x 40 w h x 40 w 40 8 Mechanical Recommended mechanical size: 12 h x 40 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

8 14 8 h x 44 8 w 14 h x 44 w h x 44 w 44 8 Mechanical Recommended mechanical size: 1h x 4w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

9 14 8 h x 48 8 w 14 h x 48 w h x 48 w 48 8 Mechanical Recommended mechanical size: 1h x 48 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

10 LED 14 h x 48 w h x 48 w Display Resolution: 208 h x 720 w pixels File Preparation: 208 h x 720 w pixels Special Notes: Avoid white backgrounds, use off-white instead of 100% RGB (which is how white is created with light). RGB white generates unintended shimmering that shifts depending on the site line. Reduce your 100% RGB values to avoid this effect. For controlled aesthetic results, use darker backgrounds. 48 File formats: Still images -.psd,.jpg,.bmp COLOR MODE: RGB SPOT LENGTH: 8 seconds LOOP DURATION: 64 seconds Live Timing / RSS / XML Feeds: Feeds take a minimum of 5 days to program once all of the applicable information has been provided by the client. Layered Photoshop file with specific text layer that contains dummy live data and cannot contain any type effects. We require a trusted source, numbers, sport scores, lottery values, countdown timers, etc. Verify the client has the right to use the feed. Feed information from the client s HTML (browsable) web page is not advisable because of high chance of error. A conference call with IT, Account Executive, and client is strongly recommended. File Upload: Username: DADIGITAL Password: 2RrN6fIJ All content is subject to the approval of. posting instructions.

11 15 8 h x 60 8 w 15 h x 60 w h x 60 w 60 Mechanical Recommended mechanical size: 15 h x 60 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

12 20 2 h x 48 8 w 19 6 h x 48 w h x 48 w 48 8 Mechanical Recommended mechanical size: 19.5 h x 48 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

13 20 8 h x 12 8 w 20 h x 12 w h x 12 w 12 8 Mechanical Recommended mechanical size: 20 h x 12 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

14 20 8 h x 60 8 w 20 h x 60 w h x 60 w 60 8 Mechanical Recommended mechanical size: 20 h x 60 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

15 20 8 h x 80 8 w 20 h x 80 w h x 80 w 80 8 Mechanical Recommended mechanical size: 20 h x 80 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

16 24 8 h x 8 8 w 24 h x 8 w h x 8 w Mechanical Recommended mechanical size: 2h x 8 w 8 8 pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

17 26 8 h x 24 8 w 26 h x 24 w h x 24 w 24 8 Mechanical Recommended mechanical size: 26 h x 2w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

18 30 8 h x 20 8 w 30 h x 20 w h x 20 w 20 8 Mechanical Recommended mechanical size: 30 h x 20 w pockets sealed with a 2 heat-seamed hem on all sides, incorporated into the finished area. Bleed the pockets. Vertical seaming only. Position seams off center, away from design focal points. All content is subject to the approval of.

19 70.5" 1" Space From Top Trim Area Height: " x Width: 47.5" 2.125" From Bottom Trim Area 50.5" KIOSK : Print: 70.5 h x 50.5 w h x 47.5 w Copy must be produced in one section. Copy bleeds on all four sides. Material / Minimum.020 rubberized styrene or.030 styrene required. Inks must be weatherproof / waterproof with sufficient UV protection and in compliance with product bulletin specifications of substrate manufacturer. UV or conventional clear coat in compliance with product bulletin specifications of substrate manufacturers. Mounting: Transparencies are sandwiched between poly carbonate face and light diffuser. Overage: Copy must be changed in compliance with the manufacturer s or printer s warranty. 20% overage is required for each month of posting. Suggested Mechanical Scale.25 = dpi image resolution at above mechanical size. Any live fonts or images used in the file must be provided. File Preparation: Macintosh platform preferred. Illustrator, Photoshop, InDesign, TIFF, JPEG, or PDF preferred. CMYK color space. All content is subject to the approval of OUTFRONT Media. Material must be received at least 10 working days before the installation at: Disposition of Material: All unused material remaining after conclusion of display will be disposed of immediately unless instructions are received 30 days prior to conclusion of display period. We disclaim any responsibility for the deletion, the failure to store, the misdelivery, or the untimely delivery of any information or material. We disclaim any responsibility for any harm resulting from downloading or accessing any information or material on the Internet using search results from our Web Sites. We disclaim any responsibility for, and if you subscribe to one of our fee-based services you will not be entitled to a refund as a result of, any service outages that are caused by our maintenance on the servers or the technology that underlies our Web Sites, failures of our service providers (including telecommunications, hosting, and power providers), computer viruses, natural disasters or other destruction or damage of our facilities, acts of nature, war, civil disturbance, or any other cause beyond our reasonable control.

20 KIOSK Overall/Trim: 68 h x 47 w : 67 h x 46 w Safety Area: 65 h x 4w *Keep critical elements inside safety area Print: Copy must be produced in one section. Copy bleeds to edge on all four sides. Material/.015 Styrene or 3 mil opaline, printed and laminated both sides Substrate must be suitable for backlighting Transparencies are sandwiched between polycarbonate face and light diffuser. (Please call to discuss as dark colors and campaign length may determine best option for creative presentation) Inks must be weatherproof / waterproof with sufficient UV protection and in compliance with product bulletin specifications of substrate manufacturer. UV or conventional clear coat in compliance with product bulletin specifications of substrate manufacturers. Mechanical Recommended mechanical size: 68 h x 47 w with adequate bleed outside document edge. Output resolution at full size must be between dpi. For artwork prepared to full size, effective resolution in mechanical should be between dpi. All art bleeds to end of pockets on mechanical. Any live fonts or images used in the file must be provided. All images and art files provided should be saved in CMYK mode, and as EPS or TIFF format with a color printout of the layout attached. Do not place text closer than 6 from the edge of visual opening on any side. Overage: Copy must be changed in compliance with the manufacturer s or printer s warranty. 20% overage is required for each month of posting. Advertising material must be received at least 10 working days c/o Swing Stage 4758 Gretna Street Dallas, TX conclusion of display date

21 Rev. MARCH 2016 WALL - DT-W1 Finished size: 93 h x 25 1 w 93 h x 25 1 w Vinyl mesh, 10 oz Mechanical Recommended mechanical size: h x 3.01 w Artwork must be prepared in proportion to the live area with adequate bleed to accommodate pockets, and must include For artwork prepared at a scale of 1/100th, effective resolution of images in mechanical should be between dpi. All art bleeds. Live or outlined fonts, and placed images must Do not place text closer than 6 from edge of live area on any side. Note: no more than 20% of image may be text. 5/8 ID (inside dimension) grommets centered on a 2 hem reinforced with a continuous band of 2 Weblon seatbelt webbing or equivalent, welded along the entire length, apart on center on all four sides. Reinforcing strip must be overlapped at corners and welded or stitched. On back side of face, a 2 T-pocket must be placed 7 7 in from the left side when looking at the panel from the front, as indicated in the diagram. Pocket must be preloaded with messenger line. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. Advertising material must be received at least 10 working days prior to the commencement of the showing, with applicable

22 live area WALL/D-500 Finished size: 235 h x 86 w 235 h x 86 w Vinyl mesh, 10 oz Mechanical Recommended mechanical size: 23.5 h x 8.6 w For artwork prepared at a scale of 1/120th, effective resolution of images in mechanical should be between dpi. Note: no more than 20% of image may be text. pockets incorporated into finished size, double reinforced with seat belt webbing around the entire perimeter. Finished size is inclusive of pockets. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. prior to the commencement of the showing,with applicable

23 live area WALL/D-501 Finished size: Vinyl mesh, 10 oz 212 h x 52 w 212 h x 52 w Mechanical Recommended mechanical size: 21.5 h x 5.2 w For artwork prepared at a scale of 1/120th, effective resolution of images in mechanical should be between dpi. Note: no more than 20% of image may be text. pockets incorporated into finished size, double reinforced with seat belt webbing around the entire perimeter. Finished size is inclusive of pockets. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. prior to the commencement of the showing,with applicable

24 WALL/D-520 Finished size: 98 h x 75 w 75 h x 75 w Vinyl mesh, 10 oz 75 live area 75 Mechanical Recommended mechanical size: 9.8 h x 7.5 w crop marks. For artwork prepared at a scale of 1/120th, effective resolution of images in mechanical should be between dpi. be provided. All images must be saved as CMYK. Note: no more than 20% of image may be text. no critical copy Finishing 5/8 ID Grommets every 18 on center; seamed and reinforced with seatbelt webbing, all four sides. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. prior to the commencement of the showing,with applicable

25 WALL/D-530 Finished size: 35 h x 75 w 35 h x 75 w live area Vinyl mesh, 10 oz Mechanical Recommended mechanical size: 35 h x 75 w crop marks. be provided. All images must be saved as CMYK. Note: no more than 20% of image may be text. 5/8 ID Grommets every 18 on center; seamed and reinforced with seatbelt webbing, all four sides. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. prior to the commencement of the showing,with applicable

26 WALL/D-531 Finished size: 52 h x 65 w 52 h x 65 w Vinyl mesh, 10 oz live area Mechanical Recommended mechanical size: 52 h x 65 w crop marks. be provided. All images must be saved as CMYK. Note: no more than 20% of image may be text. 5/8 ID Grommets every 18 on center; seamed and reinforced with seatbelt webbing, all four sides. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. prior to the commencement of the showing,with applicable

27 WALL/D-540 Finished size: 46 h x 67 w 35 h x 67 w Vinyl mesh, 10 oz live area 11 (h) copy safe area (no critical copy or imagery) Mechanical Recommended mechanical size: 46 h x 67 w Note: no more than 20% of image may be text. Finishing 5/8 ID Grommets every 18 on center; seamed and reinforced with seatbelt webbing, all four sides. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. prior to the commencement of the showing,with applicable

28 WALL/D-550 Finished size: 42 h x 182 w 42 h x 182 w Vinyl mesh, 10 oz live area Mechanical Recommended mechanical size: 9.8 h x 7.5 w crop marks. For artwork prepared at a scale of 1/120th, effective resolution of images in mechanical should be between dpi. be provided. All images must be saved as CMYK. Note: no more than 20% of image may be text. 5/8 ID Grommets every 18 on center; seamed and reinforced with seatbelt webbing, all four sides. Per city ordinance, copy must be replaced at least once every four months. All content is subject to the approval of. prior to the commencement of the showing,with applicable