FortiGate/FortiWiFi 70D/90D. Performance Consolidation Protection

Transcription

1 FortiGate/FortiWiFi 70D/90D Performance Consolidation Protection

2 February 19, Copyright 2014 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, and FortiGuard, are registered trademarks of Fortinet, Inc., and other Fortinet names herein may also be trademarks of Fortinet. All other product or company names may be trademarks of their respective owners. Performance metrics contained herein were attained in internal lab tests under ideal conditions, and performance may vary. Network variables, different network environments and other conditions may affect performance results. Nothing herein represents any binding commitment by Fortinet, and Fortinet disclaims all warranties, whether express or implied, except to the extent Fortinet enters a binding written contract, signed by Fortinet s General Counsel, with a purchaser that to performance in the same ideal conditions as in Fortinet s internal lab tests. Fortinet disclaims in full any guarantees. Fortinet reserves the right to change, modify, transfer, or otherwise revise this publication without notice, and the most current version of the publication shall be applicable.

3 Register for Support Register your Fortinet product to receive: Technical Support New product features Protection from new threats Debe registrar el producto para recibir: Apoyo técnico Nuevas funcionalidades del producto Protección contra ataques Vous devez enregistrer le produit pour recevoir: Support technique Nouvelles fonctionnalitées du produit Protection contre de nouvelles menaces La reistrazione ti permette di usufruire di: Supporto Tecnico Nuove funzionalita Proteezione dalle ultime minaccce FortiGate/FortiWiFi 70D/90D QuickStart Guide Toll free: Phone: Fax: [email protected]

4 Box Includes Before You Begin Performance Consolidation Protection W AN W AN Write down details that you may need from your network administrator or ISP. CONSOLE POWER STATUS ALARM HA WIFI FortiGate/FortiWiFi 70D/90D USB Cable DSL PPPoE Cable Modem DHCP Username It is normal to not require a hostname but your ISP may require it. Password Hostname Ethernet Cable T1/E1, Static broadband, Cable, or DSL with a static IP Power Cable 2 Wireless Antennae (Wireless models only) 4 Power Adapter (Ground lug on PoE models only) IP Address Subnet Mask Default Gateway Primary/Secondary DNS QuickStart Guide Video 5

5 1 WAN1 Internet A LAN port 1 Power Connection Ground Screw Basic Connections 1. Connect your device to a power outlet and an Internet connection. This is usually a modem, but could also be another device on your network. 2. PoE models only: connect the ground lug to the device ground screw. 2 FortiGate Setup Options Web Browser with Ethernet cable A Web Browser B OS X Web-based Manager 6 C Setup Wizard (p.7) Terminal Emulation (p.10-11) D With FortiExplorer (pp.8-9) (pp.12-13) 1. Connect the Ethernet cable. 2. Visit in your web browser. 3. Login using username admin and no password. 4. Click Wizard in the top right corner. 5. and save your settings. 6. Register your device from the dashboard page. 7

6 B USB MGMT Windows/OS X with USB 1. Download FortiExplorer from Microsoft Windows Install Mac OS X Install FortiExplorer Setup Wizard 8 2. Connect the USB cable and launch FortiExplorer if it does not appear automatically. 2. Double-Click the and drag the FortiExplorer icon to the Applications folder. 3. Connect the USB cable. 4. Click the FortiExplorer icon to launch the application. 1. Follow prompts or click Register to register your device with FortiCare. 2. Click Setup Wizard. 3. Login using username admin and no password. 4. Follow Setup Wizard steps. 5. Click to complete the setup of your device. 9

7 C Terminal Emulation with Console Cable To Connect to the CLI (Console Models Only) 1. Connect the FortiGate unit console port to the management computer using a standard console cable (not provided). 2. Start a terminal emulation program on the management computer. Select the COM port and use the following settings: Baud Rate: 9600 Data bits: 8 Parity: None Stop bits: 1 Flow Control: None 3. Press Enter on your keyboard to connect to the CLI. 4. Login using username admin and no password. You can now proceed with A list of commands can be found at Get started by typing? for a list of available commands. Begin typing a command and type? for a list of available ways to complete. For example A comprehensive reference guide with all commands can be found at

8 D USB Port iphone/ipad/ipod Touch with Apple to USB cable FortiExplorer App Download the ios FortiExplorer App to your device from 2. Use your Apple USB cable to connect to the USB port. 3. Launch the FortiExplorer App and select the device model. 4. Login using username admin and no password. 13

9 Wireless models only Device Guide FortiGate/FortiWiFi 70D/90D Non-PoE Models Only Alarm Major Minor None WiFi (Wireless models only) Connected No connection Status Booting up Normal USB MGMT (USB mini-b) USB (USB A) LAN Ports 1-14 (RJ-45) Gigabit Ethernet 14-port switch connection for the internal network WAN1 W AN USB CONSOLE POWER STATUS ALARM HA WIFI W AN DC+12V USB MG MT WAN2 PWR On Off Console (Console models only) Optional connection to the management computer. Provides access to the CLI HA Operating Disabled WAN 1 & 2, LAN Ports 1-14 Connected at 1Gbps Transmitting & receiving data at 1Gbps Connected at 10/100Mbps Transmitting & receiving data at 10/100Mbps No link established Power Connection 12V DC, 2.5A V AC, 50-60Hz adapter WAN 1 & 2 (RJ-45) Internet 14 15

10 HA Operating Disabled Status Booting up Normal Wireless models only WiFi (Wireless models only) Connected No connection PoE Status Power delivered Error/fault No power delivered Power Connection 48V DC, 2.5A V AC, 50-60Hz adapter Attention: The power adapter ground lug must be connected to the device ground screw. USB MGMT (USB mini-b) Device Guide FortiGate/FortiWiFi 90D PoE Models Only Internet CONSOLE W AN A C A C USB (USB A) WAN 1 & 2 (RJ-45) POWER STATUS ALARM HA WIFI W AN B D B PoE D C A WAN1 USB PWR On Off Alarm Major Minor None Console (Console models only) Optional connection to the management computer. Provides WAN 1 & 2, LAN Ports 1-10 & A - D Connected at 1Gbps Transmitting & receiving data at 1Gbps Connected at 10/100Mbps Transmitting & receiving data at 10/100Mbps No link established access to the CLI DC+48V USB MGMT D PoE B 10 8 LAN Ports 1-10 (RJ-45) Gigabit Ethernet 14-port switch connection for the internal network LAN Ports A - D (RJ-45) Gigabit Ethernet ports with Power over Ethernet (PoE) up to a maximum 15.4W for each port WAN2

11 More Information FortiGate Cookbook Advanced installing and setup, networking, security policies Training Services Cours About Fortinet CLI Reference li FortiOS Handbook 18

12

13

14

15 DLP WiFi Controller Application Control Anti Virus Firewall FortiAuthenticator FortiManager FortiAnalyzer FortiClient Web Filtering FortiMail FortiWeb ancer FortiBridge IPS FortiSwitch VPN FortiToken Traffic Optimization FortiWiF WAN Optimization i Anti Spam FortiAP FortiBal FortiDDoS

16

17

18

19

20

21

22

23

24

25

26

27 Cautions and Warnings Operating Temperature Température ambiante élevée 0 à 40 C (32 à 104 F) Si cet appareil est installé dans un cabinet fermé, la température ambiante du cabinet peut être supérieure à Storage temperature -35 to 70 C (-31 to 158 F) 35 à 70 C (-31 à 158 F) Humidity 20 to 95% non-condensing Humidité 20 à 95% sans condensation Operating altitude < 2250 m (7380 ft) Altitude opérationnelle <2250 m (7380 pi) Ventilation refroidissement adéquat. Circuit overloading might have on current protection and supply wiring. For redundant power sources, connect each to an IEC/UL Listed power source whose output rating is greater than or equal to the equipment. Surtension Reliable earthing Make sure all rack-mounted equipment is grounded. This includes supply connections (e.g. power strips), not only direct connections to the branch circuit. Mise à la terre des connexions directes au circuit de dérivation. Interference If possible, use Shielded Twisted Pair (STP) Ethernet cables instead of Unshielded Twisted Pair (UTP). Interférence Safety Mechanical loading To avoid personal injury or damage to the appliance, Fortinet recommends that 2 or more people together install the appliance into the rack. Balance the equipment to avoid uneven mechanical loading and tipping. Do not place heavy objects on the appliance. Installation To avoid risk of damage to your equipment, personal injury, or death, disconnect cables while servicing. Do not connect or disconnect cables during lightning. Do not use this product near water for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement or near a swimming pool. Do not install this equipment in a home or public area accessible to the general population. When installed in schools, this equipment must be installed in a location where access is restricted to trained personnel. Battery your local regulations. IMPORTANT: Switzerland: Annex 4.10 of SR applies to batteries. Batterie IMPORTANT: Grounding To prevent damage to your equipment, connections that enter from outside the building should pass through a lightning / surge protector, and be properly grounded. Use an electrostatic discharge workstation (ESD) and/or wear an anti-static wrist strap while you work. In addition to the grounding terminal of the plug, on the back panel, there is another, separate terminal for earthing. Mise à la terre / parasurtenseur et sont correctement mis à la terre. Utilisez un poste de travail de décharge électrostatique (ESD) et / ou portez un bracelet anti-statique lorsque vous For products with power over Ethernet (PoE): Power over Ethernet (PoE) Do not connect this device to PoE networks with routing to the outside plant. Use this equipment in a Network Environment 0 per IECTR Do not use PoE injectors that are not IEEE 802.3af compliant. They may damage your device. Alimentation par Ethernet Ce matériel doit être utilisé dans un Environnement Réseau 0 par IECTR Ce matériel est uniquement connecté aux réseaux PoE Regulatory Compliance Federal Communication Commission (FCC) USA This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received; including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in residential installation. This equipment generates, uses, and can radiate radio frequency energy, and if it is not installed and used in accordance with the instruction manual, it may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. WARNING: equipment Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. For FWF product model: Caution: Operations in the GHz band are restricted to indoor usage only. Industry Canada Equipment Standard for Digital Equipment (ICES) Canada CAN ICES-3 (B) / NMB-3 (B) This device complies with RSS-210 of the Industry Canada Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. suivantes: (1) le dispositif ne doit pas produire de brouillage préjudiciable, et (2) ce dispositif doit accepter tout brouillage reçu, y compris un brouillage susceptible de provoquer un fonctionnement indésirable. Radiation Exposure Statement: This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. un minimum de 20 cm de distance entre la source de rayonnement et votre corps. For FWF product model: Caution: The device for the band MHz is only for indoor usage to reduce potential for harmful interference to co-channel mobile satellite systems. High-power radars are allocated as primary users (i.e. priority users) of the bands MHz and MHz and that these radars could cause interference and/or damage to LE-LAN devices.

28 Avertissement: brouillage préjudiciable aux systèmes de satellites mobiles utilisant les mêmes canaux. De plus, les utilisateurs devraient aussi être avisés que les utilisateurs de radars causer du brouillage et/ ou des dommages aux dispositifs LAN-EL. This device has been designed to operate with an antenna having a maximum gain of 2dBi for 2.4GHz and 3dBi for 5GHz. Antenna having a higher gain is strictly prohibited per regulations of Industry Canada. The required antenna impedance is 50 ohms. Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication. Ce dispositif a été conçu pour fonctionner avec une antenne ayant un gain maximal de 2dBi pour 2,4 GHz et 3dBi pour 5GHz. Une antenne à gain plus élevé est satisfaisante. European Conformity (CE) - EU This is a Class B product. In a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. For FG product models: For FWF product model: National Communications Commission (NCC) Taiwan For FWF product model:

29 Fortinet Product License Agreement / EULA and Warranty Terms Trademarks and Copyright Statement Product License Agreement The parties to this agreement are you, the end customer, and either (i) where you have purchased your Product within the Americas, Fortinet, Inc., or (ii) where you have 1. License Grant. This is a license, not a sales agreement, between you and Fortinet. The term Software, as used throughout this Agreement, includes all Fortinet and third party or in the event Fortinet is not properly paid for the applicable Product) license to use the Software solely for your internal business purposes (provided, if a substantial database on which Fortinet installed the Software or, for stand-alone Software, solely on a single computer running a validly licensed copy of the operating system 2. Limitation on Use. engineer, decompile, disassemble, create derivative works based on, sublicense, or distribute the Software; (b) rent or lease any rights in the Software in any form to to any other person or entity, or (d) remove any proprietary notice, labels, or marks on the Software, Products, and containers. 3. Proprietary Rights. to the intellectual property in the Software or other Products is transferred to you and you will not acquire any rights to the Software or other Products except for the 4. Term and Termination. documents, the term of the license is for the duration of Fortinet s copyright in the Software. Fortinet may terminate this Agreement, and the licenses and other rights cease using the Software and any Product and either destroy all copies of the Fortinet documentation or return all materials to Fortinet. The provisions of this Agreement, 5. Transfer. the Software to one end user on a permanent basis, provided that: (i) you ensure that your customer and the end user receives a copy of this Agreement, is bound by its terms and conditions, and, by selling the Product or Software, you hereby agree to enforce the terms in this Agreement against such end user, (ii) you at all times comply with all applicable United States export control laws and regulations, and (iii) you agree to refund any fees paid to you by an end user who purchased Product(s) from you but does not agree to the terms contained in this Agreement and therefore wishes to return the Product(s) as provided for in this Agreement. Further, if you are a non-authorized reseller of Products, you are not authorized to sell Product(s) or Software, but, regardless, by selling Product(s) or Software, you hereby agree you are bound by the restrictions and obligations herein and are bound to: (i) ensure that your customer and the end user receive a copy of this Agreement and are bound in full by all restrictions and obligations herein (ii) enforce the restrictions and obligations in this Agreement against such customer and/or end user, (iii) comply with all applicable United States export control laws and regulations and all other applicable laws, and (iv) refund any fees paid to you by a customer and/or end user who purchased Product(s) from you but does not agree to the restrictions and obligations contained in this Agreement and therefore wishes to return the Product(s) as 6. Limited Warranty. Fortinet provides this limited warranty for its product only to the single end-user person or entity that originally purchased the Product from Fortinet or its authorized reseller or distributor and paid for such Product. The warranty is only valid for Products which are registered on Fortinet s Support Website: or on the TalkSwitch support website: or such other website as provided by Fortinet. For the below software warranty to start, registration will not be honored. For the hardware warranty, such warranty starts on the earlier of the date of Product registration on Fortinet s Support Website or ninety (90) days from the date that the Product was originally shipped from Fortinet s facilities. It is the Fortinet distributor s and reseller s responsibility to make clear to the end user the date the product was originally shipped from Fortinet, and it is the end user s responsibility to understand the original ship date from the party from which the end user purchased the product. All warranty claims must be submitted in writing to Fortinet before the expiration of the warranty term or such claims are waived in full, i.e. ninety parts not purchased directly from Fortinet by the end-user, for any accessories, or for any stand-alone software. Fortinet warrants that the hardware portion of the Products, including spare parts unless noted otherwise ( Hardware ) will be free from material defects in workmanship end-of-life date), and, for spare parts, power supplies, and accessories, solely a ninety (90) days limited warranty. Fortinet s sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. This obligation is exclusive of transport fees, labor or installation costs, and any other cost which are not directly associated to the Product. Such repair or replacement will be rendered by Fortinet at an authorized Fortinet service facility as determined by Fortinet. The replacement Hardware need not be new or of an identical make, model, or part; Fortinet may, in its discretion, replace the defective Hardware (or any part thereof) with any reconditioned Product that Fortinet reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. The Hardware Warranty Period for the repaired or replacement Hardware shall be for the greater of the remaining Hardware Warranty Period or ninety days from the delivery of the repaired or replacement Hardware. If Fortinet determines in its reasonable discretion that a material defect is incapable of correction or that it is not practical to repair or replace defective Hardware, the price paid by the original purchaser for the defective Hardware will be refunded by Fortinet upon return to Fortinet of the defective Hardware. All Hardware (or part thereof) that is replaced by Fortinet, or for which the purchase price is refunded, shall become the property of Fortinet upon replacement or refund. in the applicable documentation for a period of ninety (90) days ( Software Warranty Period ), if the Software is properly installed on approved Hardware and operated as contemplated in its documentation. Fortinet s sole obligation shall be to repair or replace the non-conforming Software with software that substantially conforms to to the terms and conditions of the license granted by Fortinet for the Software. The Software Warranty Period shall extend for an additional ninety (90) days after any replacement software is delivered. If Fortinet determines in its reasonable discretion that a material non-conformance is incapable of correction or that it is not practical to repair or replace the non-conforming Software, the price paid by the original licensee for the non-conforming Software will be refunded by Fortinet; provided that 7. Disclaimer of Other Warranties and Restrictions. except by Fortinet or its authorized representative, (b) has not been installed, operated, repaired, or maintained in accordance with instructions supplied by Fortinet, (c)

30 8. Governing Law. 9. Limitation of Liability. 10. Import / Export Requirements; FCPA Compliance. 11. U.S. Government End Users. 12. Tax Liability. 13. General Provisions. 14. Privacy. share personal information with such subcontractors in order to perform these and other functions, but such subcontractors may not use your personal information 15. Open Source Software. event will the copyright holder for the open source software be liable to you for damages, including any special, incidental or consequential damages arising out of the

31 b) Accompany it with a written offer, valid for at least three years, to give any third party, for a charge no more than your cost of physically performing source customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code. (This alternative is allowed only for noncommercial (compiler, kernel, and so on) of the operating system on which the executable runs, unless that component itself accompanies the executable. If distribution of it. Program at all. For example, if a patent license would not permit royalty-free redistribution of the Program by all those who receive copies directly or indirectly through If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. the Free Software Foundation. guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally. A library means a collection of software functions and/or data prepared so as to be conveniently linked with application programs (which use some of those functions and data) to form executables. offer warranty protection in exchange for a fee. passed when the facility is invoked, then you must make a good faith effort to ensure that, in the event an application does not supply such function or table, the facility still operates, and performs whatever part of its purpose remains meaningful. permissions for other licensees extend to the entire whole, and thus to each and every part regardless of who wrote it. Thus, it is not the intent of this section to claim rights or contest your rights to work written entirely by you; rather, the intent is to exercise the right to control the distribution of derivative or collective works based on on a medium customarily used for software interchange. though the source code is not.

32 than the cost of performing this distribution. place. it. However, as a special exception, the materials to be distributed need not include anything that is normally distributed (in either source or binary form) with the It may happen that this requirement contradicts the license restrictions of other proprietary libraries that do not normally accompany the operating system. Such a and provided that you do these two things: terms of the Sections above. form of the same work. If any portion of this section is held invalid or unenforceable under any particular circumstance, the balance of the section is intended to apply, and the section as a whole is intended to apply in other circumstances. It is not the purpose of this section to induce you to infringe any patents or other property right claims or to contest validity of any such claims; this section has the contributions to the wide range of software distributed through that system in reliance on consistent application of that system; it is up to the author/donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is Software Foundation. decision will be guided by the two goals of preserving the free status of all derivatives of our free software and of promoting the sharing and reuse of software generally.

33