Cyberoam Anti Spam Configuration Guide Version 9

Transcription

1 Cyberoam Anti Spam Configuration Guide Version 9 Document version /06/2008

2 IMPORTANT NOTICE Elitecore has supplied this Information believing it to be accurate and reliable at the time of printing, but is presented without warranty of any kind, expressed or implied. Users must take full responsibility for their application of any products. Elitecore assumes no responsibility for any errors that may appear in this document. Elitecore reserves the right, without notice to make changes in product design or specifications. Information is subject to change without notice. USER S LICENSE The Appliance described in this document is furnished under the terms of Elitecore s End User license agreement. Please read these terms and conditions carefully before using the Appliance. By using this Appliance, you agree to be bound by the terms and conditions of this license. If you do not agree with the terms of this license, promptly return the unused Appliance and manual (with proof of payment) to the place of purchase for a full refund. LIMITED WARRANTY Software: Elitecore warrants for a period of ninety (90) days from the date of shipment from Elitecore: (1) the media on which the Software is furnished will be free of defects in materials and workmanship under normal use; and (2) the Software substantially conforms to its published specifications except for the foregoing, the software is provided AS IS. This limited warranty extends only to the customer as the original licenses. Customers exclusive remedy and the entire liability of Elitecore and its suppliers under this warranty will be, at Elitecore or its service center s option, repair, replacement, or refund of the software if reported (or, upon, request, returned) to the party supplying the software to the customer. In no event does Elitecore warrant that the Software is error free, or that the customer will be able to operate the software without problems or interruptions. Elitecore hereby declares that the anti virus and anti spam modules are powered by Kaspersky Labs and by Commtouch respectively and the performance thereof is under warranty provided by Kaspersky Labs and by Commtouch. It is specified that Kaspersky Lab does not warrant that the Software identifies all known viruses, nor that the Software will not occasionally erroneously report a virus in a title not infected by that virus. Hardware: Elitecore warrants that the Hardware portion of the Elitecore Products excluding power supplies, fans and electrical components will be free from material defects in workmanship and materials for a period of One (1) year. Elitecore's sole obligation shall be to repair or replace the defective Hardware at no charge to the original owner. The replacement Hardware need not be new or of an identical make, model or part; Elitecore may, in its discretion, replace the defective Hardware (or any part thereof) with any reconditioned product that Elitecore reasonably determines is substantially equivalent (or superior) in all material respects to the defective Hardware. DISCLAIMER OF WARRANTY Except as specified in this warranty, all expressed or implied conditions, representations, and warranties including, without limitation, any implied warranty or merchantability, fitness for a particular purpose, non-infringement or arising from a course of dealing, usage, or trade practice, and hereby excluded to the extent allowed by applicable law. In no event will Elitecore or its supplier be liable for any lost revenue, profit, or data, or for special, indirect, consequential, incidental, or punitive damages however caused and regardless of the theory of liability arising out of the use of or inability to use the product even if Elitecore or its suppliers have been advised of the possibility of such damages. In the event shall Elitecore s or its supplier s liability to the customer, whether in contract, tort (including negligence) or otherwise, exceed the price paid by the customer. The foregoing limitations shall apply even if the above stated warranty fails of its essential purpose. In no event shall Elitecore or its supplier be liable for any indirect, special, consequential, or incidental damages, including, without limitation, lost profits or loss or damage to data arising out of the use or inability to use this manual, even if Elitecore or its suppliers have been advised of the possibility of such damages. RESTRICTED RIGHTS Copyright Elitecore Technologies Ltd. All rights reserved. Cyberoam, Cyberoam logo are trademark of Elitecore Technologies Ltd. CORPORATE HEADQUARTERS Elitecore Technologies Ltd. 904 Silicon Tower, Off. C.G. Road, Ahmedabad , INDIA Phone: Fax: Web site:

3 Contents Technical Support...4 Typographic Conventions...5 Overview...6 Spam...6 Cyberoam Gateway Anti Spam...7 Configuration...7 Spam Policy...8 Types of Policies...8 Detection of spam attributes...8 Actions...9 Global policy...10 Default policy...11 Custom policy...12 Create Custom Scan policy...12 Manage Custom Spam policy...13 Add Advanced Rules...14 Change Advanced action rules Order...17 Delete Custom Spam policy...18 Address Groups...19 Create Address Groups...19 Delete Address Groups...20 Delete individual address from Group...21 Spam Rule...22 Create Spam rule...22 Delete Spam Rule...23 Change Spam rule Order...24 Local Domains...25 Add Domains...25 Delete Domains...25 Enable Scanning...26 General Configuration...27 Bypass Reporting

4 Technical Support You may direct all questions, comments, or requests concerning the software you purchased, your registration status, or similar issues to Customer care/service department at the following address: Corporate Office elitecore Technologies Ltd. 904, Silicon Tower Off C.G. Road Ahmedabad Gujarat, India. Phone: Fax: Web site: Cyberoam contact: Technical support (Corporate Office): Web site: Visit for the regional and latest contact information. 4

5 Typographic Conventions Material in this manual is presented in text, screen displays, or command-line notation. Item Convention Example Server Client User Username Part titles Bold and shaded font typefaces Machine where Cyberoam Software - Server component is installed Machine where Cyberoam Software - Client component is installed The end user Username uniquely identifies the user of the system Report Topic titles Shaded font typefaces Introduction Subtitles Bold & Black typefaces Notation conventions Navigation link Bold typeface Group Management Groups Create it means, to open the required page click on Group management then on Groups and finally click Create tab Name of a particular parameter / field / command button text Cross references Lowercase italic type Hyperlink in different color Enter policy name, replace policy name with the specific name of a policy Or Click Name to select where Name denotes command button text which is to be clicked refer to Customizing User database Clicking on the link will open the particular topic Notes & points to remember Prerequisites Bold typeface between the black borders Bold typefaces between the black borders Note Prerequisite Prerequisite details 5

6 Overview Welcome to Cyberoam s Anti Spam User guide. Cyberoam is an Identity-based UTM Appliance. Cyberoam s solution is purpose-built to meet the security needs of corporates, government organizations, and educational institutions. Cyberoam s perfect blend of best-of-breed solutions includes User based Firewall, Content filtering, Anti Virus, Anti Spam, Intrusion Detection and Prevention (IDP), and VPN. Cyberoam provides increased LAN security by providing separate port for connecting to the publicly accessible servers like Web server, Mail server, FTP server etc. hosted in DMZ which are visible the external world and still have firewall protection. Cyberoam Anti Spam as a part of unified solution along with Anti Virus and IDP (Intrusion Detection and Prevention), provides real time virus and spam scanning. Anti Spam module is an add-on module which needs to be subscribed before use. Spam Spam refers to electronic junk mail or junk newsgroup postings. Some people define spam even more generally as any unsolicited . Spamming is to indiscriminately send unsolicited, unwanted, irrelevant, or inappropriate messages, especially commercial advertising in mass quantities. In other words, it is an inappropriate attempt to use a mailing list, or other networked communications facility as a broadcast medium by sending the same message to a large number of people who did not ask for it. In addition to being a nuisance, it also eats up a lot of network bandwidth. Because the Internet is a public network, little can be done to prevent spam, just as it is impossible to prevent junk mail. However, the use of software filters in programs can be used to remove most spam sent through to certain extent. With the number of computer users growing and the exchange of information via the Internet and increases in volume, spamming has become an almost everyday occurrence. Apart from network bandwidth, it also affects the employees productive as deletion of such mails is a huge task. Anti spam protection is therefore a priority for anyone who uses a computer. 6

7 Cyberoam Gateway Anti Spam Cyberoam Anti Spam as a part of unified solution along with Anti Virus and IDP (Intrusion Detection and Prevention), provides real time virus scanning that protects all network nodes workstations, files servers, mail system from known and unknown attacks by worms and viruses, Trojans, spyware, adware, spam, hackers and all other cyber threats. Cyberoam Gateway Anti Spam provides you with powerful tools for scanning and detecting spam in the traffic. Cyberoam Gateway Anti Spam inspects all incoming s - SMTP, POP3 and IMAP traffic - before the messages are delivered to the receiver's mail box. If spam is detected, depending on the policy and rules set, s are processed and delivered to the recipient unaltered, reject and generate a notification on the message rejection, add or change subject or change the receiver. Cyberoam Gateway Anti Spam is fully compatible with all the mail systems and therefore can be easily integrated into the existing network. Cyberoam Anti Spam allows to: Scan messages for spamming by protocols namely SMTP, POP3, IMAP Monitors and proactively detect recurrent patterns in spam mails and combat multi-format text, images, HTML etc. and multi-language threats Monitors mails received from Domain/IP address Detect spam mails using RBLs Accept/Reject messages based on message size and message header Customize protection of incoming and outgoing messages by defining scan policies Set different actions for SMTP, POP and IMAP spam mails Quarantine SMTP mails Configure action for individual address Notify receivers about spam messages Configuration Configuration task for implementing spam solution: 1. Create Spam policy. Optionally use global or default policy provided by Cyberoam 2. Create Spam rule for the policy created in step 1 i.e. create spam rule and attach policy to the rule 3. Enable scanning from firewall rule 7

8 Spam Policy As soon as you register Cyberoam Gateway Anti-spam module, default spam policy is applicable to all the incoming traffic. Default spam policy is the general policy and not fit-for-all policy and hence might allow certain spam mails while block certain required mails also. Fine tuning the policies means reducing the spam attacks and chances of loosing any important and required mails. Spam policy defines what action is to be taken if the mail is identified as a spam and to which address the copy of mail is to be send. As network scanning rules control all the traffic passing through the Cyberoam and decide whether to scan or bypass mail, policy will be applied to that traffic only that is filtered by network scanning rule. To reduce the risk of losing the legitimate messages, Spam quarantine repository - a storage location, provides administrators a way to automatically quarantine messages that are identified as spam. This will help in managing spam and probable spam quarantined mails and can take appropriate actions on such mails. Types of Policies 1. Global Global policy is applicable to all the mail recipients i.e. address and address groups. Cyberoam provides blank corporate policy which can be customized as per the requirement. 2. Default Default policy is applicable to all the recipients i.e. address and address group except for those for whom the custom policy is defined. Default policy is applicable to all the recipients as soon as you register the Anti Spam module. 3. Custom/Personal Cyberoam allows defining custom policy for specific individual recipient or address group and is applicable to only to those specific individual recipient or address group and not all the recipients. Scanning rules defines which scanning policy is to be applied to which recipient address i.e. maps scanning policy to the address. Detection of spam attributes Cyberoam uses content filtering and three RBLs - Real time Black hole Lists to check for the spam attributes as well as POP3/IMAP mails: Message size Message header Premium RBL Reliable RBL Standard RBL 8

9 RBL is a list of IP addresses whose owners refuse to stop the proliferation of spam i.e. are responsible for spam or are hijacked for spam relay. Cyberoam will check each RBL for the connecting IP address. If the IP address matches to the one on the list then the specified action in policy is taken. Actions Accept Accepts and delivers the mail to the intended receiver. This action can be defined for both SMTP and POP/IMAP protocols. Reject Rejects the mail. This action sends the notification message to sender. This action can be defined only for SMTP protocol. Drop Drops the mail. This action does not send any notification message to sender. This action can be defined only for SMTP protocol. Change Recipient - Accepts the mail but delivers the mail to the specified receiver and not to the receiver for whom the mail was originally send. This action can be defined only for SMTP protocol only. Prefix Subject Accepts and delivers the mail to the intended receiver but after changing the subject of the mail. You can customize the subject in such a way that the receiver knows that the mail is a spam mail. This action can be defined for both SMTP and POP/IMAP protocols. 9

10 Global policy Cyberoam provides the blank global policy which can be customized as per your requirement. By default, global policy applies to all the users. There is no need to apply the global policy to the users using rules. Select Anti Spam Spam Policy Global policy to customize policy. Refer to Add advanced rules for more details. 10

11 Default policy As soon as you subscribe Cyberoam Gateway Anti Spam, default spam policy is applicable to the all incoming traffic. Default spam policy is the general policy and not fit-for-all policy and hence might allow certain spam mails while block certain required mails also. Default policy can be customized as per your requirement. Default policy will be applied to those users only for whom custom/personal policy is not defined. As per your requirements, Cyberoam allows you to define multiple policies instead of single global policy. Fine tuning the policies means reducing the spam attacks and chances of loosing any important and required mails. Select Anti Spam Spam Policy Default policy to customize policy. Refer to Add advanced rules for more details. 11

12 Custom policy Custom scan policy allows you to specify the spam filtering level security i.e. action severity based on your requirement. Create Custom Scan policy Select Anti Spam Spam policy Create Custom policy to open the create page Screen - Create Custom Spam policy Screen Elements Spam Policy details Name Send copy to address Description Specify policy name. Choose a name that best describes the policy Specify addresses to which the mail copy is to be send. If Cyberoam detects the spam mail then it sends the spam notification to the mail receiver. Cyberoam will forward such a mail to the receiver only if configured in the Spam policy. But in case you want Administrator or any other person in the organization to know about spam and receive this spam mail then specify all the s address to whom you want to forward the copy of such mails. More than one address can be specified using comma For example john@hotmail.com,,joe@yahoo.com Policy Description Create button Cancel button Add button This option can be applied for SMTP protocol only Specify full description of the policy Creates the policy Cancels the current operation If the policy is successfully created, create advanced scanning rules to specify what action is to be taken on mail identified as SPAM after successful creation of the policy. Refer to Manage Custom Policy for more detail for defining actions. Table Create Custom Spam policy screen elements 12

13 Manage Custom Spam policy Select Anti Spam Spam Policy Manage Custom policy to view the list of policies created. Click the policy to be modified. Screen Manage Custom Spam policy Screen Elements Spam Policy details Name Send copy to address Description Displays policy name Displays addresses to which the mail copy will be send, modify if required. More than one address can be specified using comma For example Policy Description Update button Cancel button Advanced Rules Add button This option can be applied for SMTP protocol only. Displays full description of the policy, modify if required Updates and saves modifications done in any of the above fields Cancels the current operation Click to define the action to be taken on mails if the matching condition is found. Refer Add Advanced Rules for details. Table Manage Custom Spam policy screen elements 13

14 Add Advanced Rules Select Anti Spam Spam Policy Manage Custom policy to view the list of policies created. Click the policy to which action rules are to be added. Conditions When Cyberoam Anti Spam identifies Mail as SPAM, Cyberoam accepts and delivers the mail to the intended receiver but only after adding a prefix SPAM to the original subject of the mail. Original subject: This is a test Receiver will receive the mail with subject line as: SPAM: This is a test You can customize the subject in such a way that the receiver knows that the mail is a spam mail. To specify the contents to be prefixed to the existing subject line, select Prefix Subject as action. You can set different actions for SMTP and POP. When Cyberoam Anti Spam identifies Mail as PROBABLE SPAM, Cyberoam accepts and delivers the mail to the intended receiver but after adding a prefix PROBABLE SPAM to the original subject of the mail. 14

15 Original subject: This is a test Receiver will receive the mail with subject line as: PROBABLE SPAM: This is a test You can customize the subject in such a way that the receiver knows that the mail is a spam mail. To specify the contents to be prefixed to the existing subject line, select Prefix Subject as action. You can set different actions for SMTP and POP. When Cyberoam Anti Spam identifies Mail as VIRUS OUTBREAK, Cyberoam accepts and delivers the mail to the intended receiver but only after adding a prefix SPAM to the original subject of the mail. Original subject: This is a test Receiver will receive the mail with subject line as: SPAM: This is a test You can customize the subject in such a way that the receiver knows that the mail is a spam mail. To specify the contents to be prefixed to the existing subject line, select Prefix Subject as action. You can set different actions for SMTP and POP mails When Cyberoam Anti Spam identifies Mail as PROBABLE VIRUS OUTBREAK, Cyberoam accepts and delivers the mail to the intended receiver but only after adding a prefix SPAM to the original subject of the mail. Original subject: This is a test Receiver will receive the mail with subject line as: SPAM: This is a test You can customize the subject in such a way that the receiver knows that the mail is a spam mail. To specify the contents to be prefixed to the existing subject line, select Prefix Subject as action. You can set different actions for SMTP and POP mails. From Address/Domain/IP address Specified action will be taken if the mail sender or IP address matches the specified address, domain or IP address. You can set action for SMTP only. From Address/IP address Specified action will be taken if the mail sender or IP address belongs to the specified address or IP address group. You can set action for SMTP only. Message Size - Specified action will be taken if the mail size matches the specified size. You can set different actions for SMTP and POP. Message Header - Specified action will be taken if the message header contains the specified text. You can set different actions for SMTP and POP. You can scan message header for spam in: Subject Specified action will be taken if the header contains the matching subject From - Specified action will be taken if the header contains the matching text in the From address. To - Specified action will be taken if the header contains the matching text in the To address. 15

16 Others Specified action will be taken if the matching text is found in the header RBL - Specified action will be taken if the sender is listed in the specified RBL Group. You can set different actions for SMTP and POP mails. Actions Following actions can be taken on the mail identified as the SPAM, Probable SPAM, VIRUS OUTBREAK or Probable VIRUS OUTBREAK Protocol Action Meaning SMTP Reject Mail is rejected and rejection notification is send to the mail sender SMTP Drop Mail is rejected but rejection notification is not send to the mail sender SMTP, POP3 Accept Mail is accepted and delivered to the intended receiver SMTP Change Recipient Mail is accepted but is not delivered to the receiver for whom the message was originally send. SMTP, POP3 Prefix Subject Mail is send to the receiver specified in the spam policy Mail is accepted and delivered to the intended receiver but after tagging the subject line. Tagging content is specified in spam policy. You can customize subject tagging in such a way that the receiver knows that the mail is a spam mail. For Example Contents to be prefixed to the original subject: Spam notification from Cyberoam Original subject: This is a test Receiver will receive mail with subject line as: Spam notification from Cyberoam - This is a test SMTP Quarantine Mail is quarantined and can be viewed or downloaded from the quarantine area. 16

17 Change Advanced action rules Order Advanced action rules are ordered by their priority. When the rules are applied, they are processed from the top downwards and the first suitable rule found is applied. Hence, while adding multiple rules, it is necessary to put strict rules before moderate and general rules. Select Anti Spam Manage Custom policy to view the list of policies created. Click the policy whose action rule order is to be changed. Click the rule whose order is to be changed Click Move Up to move the selected rule one-step up Click Move Down to move the selected rule one-step down Click Update Order to save the order 17

18 Delete Custom Spam policy Prerequisite Not assigned any Rule Select Anti Spam Spam policy Manage Custom policy to view the list of policies created Screen Delete Custom Spam policy Screen Elements Del Description Select policy for deletion Click Del to select Select All Delete button More than one policy can also be selected Select all the policies for deletion Click Select All to select all the policies Deletes all the selected policy/policies Table Delete Custom Spam policy screen elements Note Default policy cannot be deleted. 18

19 Address Groups Scanning rule can be defined for individual or group of address IP address RBL (Real time black hole List) Address group is the group of addresses, IP addresses, or RBLs. Whenever the policy is applied to the address group, policy is applied to all the addresses included in the group. RBL is a list of IP addresses whose owners refuse to stop the proliferation of spam i.e. are responsible for spam or are hijacked for spam relay. This IP addresses might also be used for spreading virus. Cyberoam will check each RBL for the connecting IP address. If the IP address matches to the one on the list then the specified action in policy is taken. Create Address Groups Select Anti Spam Configuration Address Groups to open the Address group page. Click Create to open the create page. Screen Create Address Group 19

20 Screen Elements Address Group details Name Group Description Specify group name Specify group type. You can create group of RBLs, IP address or address. RBL is a list of IP addresses whose owners refuse to stop the proliferation of spam i.e. are responsible for spam or are hijacked for spam relay. Description Create button Cancel button Cyberoam will check each RBL for the connecting IP address. If the IP address matches to the one on the list then the specified action in policy is taken. Specify full description Creates group and depending on the group type allows adding address, IP addresses or RBL names Click Add Type all the addresses to be grouped specified by comma e.g. john@yahoo.com, joe@hotmail.com Cancels the current operation Table Create Address Group screen elements Delete Address Groups Select Anti Spam Configuration Address Groups to view the list of groups created Screen Delete Address Group Screen Elements Del Description Select address group for deletion Click Del to select Select All Delete button More than one address group can also be selected Select all the address group for deletion Click Select All to select all the address groups Deletes all the selected address groups Table Delete Address Group screen elements 20

21 Delete individual address from Group Select Anti Spam Configuration Address Groups to view the list of groups created. Click the group from which the address is to be deleted Screen Delete Address from Group Screen Elements Delete Description Select address for deletion Click Delete to select Select All Delete button More than one address can also be selected Select all the address for deletion Click Select All to select all the address Deletes all the selected address Table Delete Address from Group screen elements 21

22 Spam Rule Scanning rules defines which scanning policy is to be applied to which recipient address i.e. map scanning policy with the address. A rule allows to apply: single policy for a address or group of addresses multiple policies for a particular address or group of addresses Create Spam rule Prerequisite Policy created Address group created (if rule is for group) Select Anti Spam Spam Rules to open the create page Screen - Create Spam Rule Screen Elements Spam Rule Details Action Item Description Select whether the rule is for individual address or group Specify address or select the Address Group 22

23 Screen Elements Description Recipient Address Address Group Policy Name Add button Cancel button Specify recipient address If the rule is for the complete domain the specify Specify address group Specify policy to be applied. According to the action specified in the policy, mails will be delivered as original or will be tagged and forwarded to the receiver. Creates rule Cancels the current operation Table Create Spam Rule screen elements Delete Spam Rule Select Anti Spam Spam Rules to view the list of rules created. Screen - Delete Spam Rule Screen Elements Del Description Select rule for deletion Click Del to select Select All More than one rule can also be selected Select all the rules for deletion Click Select All to select all the rules Delete button Deletes all the selected rules Table Delete Spam Rule screen elements 23

24 Change Spam rule Order Rules are ordered by their priority. When the rules are applied, they are processed from the top downwards and the first suitable rule found is applied. Hence, while adding multiple rules, it is necessary to put strict rules before moderate and general rules. Default policy order cannot be changes. Select Anti Spam Spam Rules Click the rule whose order is to be changed Click Move Up to move the selected rule one-step up Click Move Down to move the selected rule one-step down Click Update to save the order 24

25 Local Domains Cyberoam also allows bypassing RBL scanning of mails for certain domains. To bypass RBL scanning of certain domains, define such domains as trusted domains Add Domains Select Anti Spam Configuration Local Domains Type Domain name or IP address Click Add Mails from the specified domains will not be scanned for RBLs. Delete Domains Select Anti Spam Configuration Local Domain to view the list of domains that will be bypassed from RBL scanning Screen Elements Del Description Select domain for deletion Click Del to select Select All Delete button More than one domain can also be selected Select all the domains for deletion Click Select All to select all the domains Deletes all the selected domains 25

26 Enable Scanning Enable anti-spam scanning using firewall rules. While anti-spam settings can be configured for system-wide use, they can also be implemented with specific settings on a per user basis. Refer to Cyberoam User Guide, Firewall section for creating firewall rules for enabling the anti-spam scanning. You can enable anti spam scanning by creating firewall rule for: Zone User/User Group Host/Host Group By enabling scanning through firewall, you can customize levels of protection. For example, while traffic between LAN and WAN might need strict protection, traffic between trusted internal addresses might need moderate protection. Hence you can enable/disable scanning for particular combination of source and destination IP address or domain. 26

27 General Configuration Select Anti Spam Configuration General Configuration to open the configuration page If Anti spam module is not subscribed, configuration page will display the message that module is not subscribed and Cyberoam will not detect spam mails. 27

28 Screen Elements Description Anti Spam Engine information Anti Spam Engine Anti Spam Engine status Information - Anti Spam server is down - Anti Spam server is up Cyberoam Anti Spam Center connectivity status - Cyberoam is not connected and will not be able to detect spam mails - Cyberoam is connected with Cyberoam Anti Spam Center s server File size restriction SMTP Mails greater than size Over Sized Mail Action Cyberoam Anti spam definition database contains currently identified spam signatures/definitions which are used for identifying spam mails. By default, database updates are automatically downloaded and installed on your computer every 30 minutes. Specify maximum file size (in KB) for scanning. Files exceeding this size received through SMTP will not be scanned. Specify the action to be taken on oversize files. POP3/IMAP greater than size Mails Available option Accept - All the oversize mails will be forwarded to the recipient without scanning Reject All the oversized mails are rejected and notification message is send to the mail sender. Drop All the oversized mails are dropped. By default, files exceeding 50 MB will not be scanned. Specify maximum size (in KB) of the file to be scanned. Files exceeding this size received through POP/IMAP will not be scanned and forwarded to the recipient without scanning. Enforce Anti Spam policies for SMTP Authenticated Connections Quarantine Area Total Utilization ( Anti Virus + Anti Spam ) By default, files exceeding 10 MB will not be scanned. Enable if anti spam policy is to be implemented for the SMTP authenticated traffic also. By default, spam policies are not applicable to the SMTP authenticated traffic. Displays percentage of quarantined spam and virus infected messages. Click to search or download any quarantined mail. Quarantined mails can be searched based on sender address, receiver address, and subject. Header to detect recipient for POP3/IMAP 28

29 Screen Elements Description Click Add to specify header which should be used for detecting the recipient s address. By default, Cyberoam uses Delivered-To and Received headers. Default headers cannot be deleted Bypass Reporting By default, Cyberoam Anti Spam generates reports for all the Internal Domains and Ids. To bypass reporting of certain domains and ids, Administrator has to create an Exclusion domain list and id list. All the domains and ids included in the exclusion list will not be included in the Anti Spam reports. To define the exclusion list, select Reports Configure Local Domains or select Reports Configure Bypass Ids 29