Ouvis C1 Camera Installation Manual

Transcription

1 Ouvis C1 Camera Installation Manual Product View Package Contents Smart Home Wireless IP Camera C1 * 1, Installation Manual * 1, Bracket * 1, Power Adapter * 1, Screws Package *1, Ethernet Cable * 1, Environment Requirements A, WiFi router is mandatory to have, and the router already connects to internet; B, The Smartphone or PC, which you want to use to configure the camera, already connects to your WiFi router; C, Router enables DHCP server (most of routers run DHCP server by default); D,Make sure these is no such restrictions on your WiFI router or in your LAN: -MAC address access restriction (e.g. MAC address white list or MAC blacklist) -firewall settings to not allow device in internal network to access internet or similar settings

2 If there is such restrictions, you should know how to configure your WiFi router or firewall to allow the camera get IP address and access the internetif you are not clear about this, please refer to your WiFi router manual or support. Installation Initial installation with smartphone, goto 1-1; Initial installation with PC, goto 1-2; Add installed Camera with smartphone, goto 1-3; Add installed Camera with PC, goto 1-4; 1-1, Initial installation with smartphone Step1 Install APP on your smartphone -If you are using Android smartphone, download NetCam App on Google Play and install the App in your Android smartphone. -If you are using iphone or ipad, download NetCam App on Apple App Store and install the App in your iphone or ipad. Step2 Find your camera by the wire network a)connect the camera to your wireless router with the Ethernet cable included in the camera box; b)plug the power cord to the camera, power on the camera with the power adapter included in the camera box; c)wait a minute, the camera will run up; d)make sure your smartphone connects to same router via WIFI. Open the smartphone App, Click Add Device menu, Then click Search Device in Lan (Android)/ LAN search(ios) ; e)click the camera device found by the App (the Done button), Then the camera would be added to device list, you can view the camera s living video via wire network now; Step3 Configure the WiFi network from smartphone a)click the camera s setting icon button (the icon like gear), go into WiFi Setting ; b) Click WiFi manager to search WiFi network nearby; c)choose the WiFi network of your wireless router, Input your WiFi password. Make sure

3 you input the correct WiFi password. d)after you complete the camera WiFi setting, Camera will reboot automatically. Now you can pull out the Ethernet cable. Wait the camera connects to the router by WiFi,it usually takes about 1-3mins. Note: If you find the camera doesn't go online via WIFI, please do the procedure from Step2 to Step3 again. And please pay attention to the WiFi password input in Step3 is correct. 1-2, Initial installation with PC Step1 Install PC software You can download the PC software from the two links blow: Install the PC software when download is completed. Step2 Find your camera in the wire network a) Connect the camera to your wireless router with Ethernet cable included in the camera box; b) Plug the power cord to the camera, power on the camera with the power adapter included in the camera box; c) wait a minute, the camera will run up; d)run the PC software by double click the NetCam icon(you should run as Administrator or PC account with administrator right).click + button on the right-top menu, then click Search" button; e)double click the camera device you searched, Then edit the camera information, Now the camera would be added to device list

4 f)you can see the camera s living video via wire network now via drag the camera to the video window; Step3 Configure the WiFi network a) Click the camera s setting icon button (the icon like gear), go into WiFi Setting ; b) Click Search button to search WiFi network nearby; c) Choose the WiFi network of your wireless router, Input your WiFi password.make sure you input the correct WiFi password. d)after you complete the camera WiFi setting, Camera will reboot automatically. Now you can pull out the Ethernet cable. Wait the camera connects to router by WiFi, it usually takes about 1-3mins. Note: If you find the camera doesn't go online via WIFI, please do the procedure from Step2 to Step3 again. And please pay attention to check you input the correct WiFi password in Step3.

5 1-3, Add installed Camera with smartphone Prepare: a)make sure your camera is online; b)make sure the smartphone App is installed; Step1 Open the smartphone App, Click Add Device menu, Then click Search Device in Lan ; Step2 Click the camera device you searched(the Done button), Then the camera would be added to device list, you can use the camera now; 1-4, Add installed Camera with PC Prepare: a), Make sure your camera is online; b), Make sure the PC software is installed; Step1 Double click NetCam icon to open the PC software (you should run as Administrator or PC account with administrator right). Click + button on the right-top menu, Then click Search button ; Step2 Double click the camera device you searched, Then edit the camera information, Now the camera would be added to device list you can see the camera s living video via wire network now via drag the camera to the video window;

6 Troubleshooting T-1: If you cannot find the camera after you connect router and camera with the wire Ethernet cable, check below: A, Make sure you are using the correct software( NetCam App or Netcam PC Software); B, Make sure your router allows the camera s MAC address or no other relative firewall limits on the router; C, Make sure your router runs DHCP server, so the camera can get ip address automatically; T-2: If prompted user or password error when trying to configure the camera after searching the camera successfully (default user is admin, default password is none(needn t input any character)), check below: A,Make sure you input correct user name and input correct password; B,Wrong password indeed, there are two possible reasons: 1)You have configured it before and forget the user name or password; 2) All the camera are checked during manufacturing by factory QC. However, in a very low chance, the camera has not been set back to normal default settings after QC testing. In this case, you can reset the camera to normal default settings, you can refer to "ouvis vz1 reset" video in youtube.com--typing "ouvis" to search in youtube. Or use this link: T-3: If always prompted timeout or offline, after you setting the camera s WiFi configuration and rebooting the camera, check below: A, Make sure you have waited one minute to make the camera fully rebooting after you configure the WiFi setting. You can even unplug the power cord and plug again. B, Make sure you select the correct WiFi network (SSID) and input the correct WiFi password. If you select the wrong WiFi Network, camera will fail to join the WiFi network. C, Make sure your router allows the camera s MAC address connecting to internet or no other relative firewall limits on the router; D, Inconsistent of the WiFi encryption protocol negotiation between router and camera. You can use the PC software to configure the WiFi setting again and verify whether the WiFi security encryption way is the same as your router, like the picture below:

7 T-4: Why sometimes it prompted timeout or offline, when you want to watch the living video of camera: A: Smartphone reasons: 3G/4G signal not good sometimes; No enough WiFi network authority; B: Signal obstacle between router and camera: different floor; metal baffle, electromagnetic oven, microwave oven, etc.; Continuously human activity near router; C: Server high load, need several times to connect; How to solve: A: optimize router: raise router power; Make sure SSID to be unique; reduce interference source; B: Test the signal performance of camera using smartphone, Test the Dbm signal value using smartphone nearby camera, if the value is between -35 ~ -65dbm, contact our customer care. If between -75 ~-90 dbm, please change the camera s location to a better location; C: Try several times

8 Appendix Demo video -Initial Setup Ouvis VZ1 by Mobile APP: -Initial Setup Ousis VZ1 by PC Software -Reset Ouvis VZ1 to recover to factory initial configuration: More Functions Manual: About Alert setting: About record setting: Important Notes: Our website is Tech support