Mobile Devices Setup

Transcription

1 Mobile Devices Setup Disclaimer: The user of this document automatically accepts and agrees that the Owner/s of this document attempts to ensure that the content remains accurate and to date, no liability will be accepted for any errors whatsoever. In addition, the Owner/s of this document do not claim ownership or management of any content. Any errors can be reported to

2 1 Mobile Devices Setup *** Contents Page *** Blackberry Curve... 3 Galaxy S3 Series ipad / iphone.. 17 N7000 Galaxy Note Appendix A

3 2 BLACKBERRY CURVE Blackberry phones differ in the way that is setup on it. This article will cover the basics of setup on Blackberry phones using the Blackberry Curve as an example. Even though your phone might be slightly different, the same basic principles should apply. To set up on your BlackBerry Curve you will need: An account at an internet or provider. Login details of the incoming and outgoing mail servers. An active internet connection. Step 1 Start screen. Choose the menu key.

4 3 Step 2 Choose Setup, and then the central key. Step 3 Choose Setup Wizard, and then the central key. Step 4 Choose Setup, and then the central key.

5 4 Step 5 Choose I want to create or add an address, and check it. Choose Next, and then the central key. Step 6 Choose Next, and then the central key.

6 5 Step 7 Choose OK, and then the central key. Step 8 Under address, enter your address. Under password, enter the password of your account. Choose Next, and then the central key.

7 6 Step 9 The account is added. Choose Edit, and then the central key. Step 10 Under account name, enter My Account. Under Reply to, enter your address. Under Your name, enter your name. Scroll down, choose Save, and then the central key.

8 7 Step 11 Enter the password of your account. Choose OK, and then the central key. Return to the Start screen. Step 12 Start screen. Switch off the BlackBerry Curve and restart it in order to activate the settings. The setup is now successful. You can proceed with sending s.

9 8 GALAXY S3 SERIES If this is the first account you're setting up on your SAMSUNG Galaxy, follow the guide below. Step 1 : Main Screen On the Main screen, tap " ".

10 9 Step 2 : Setup (Manual) Enter your account information using your keypad. ENTER: "Your login username". (This is your address) ENTER: "The password for your account". Tap "Manual setup".

11 10 Step 3 : Account type Tap "POP3 account".

12 11 Step 4 : Incoming server settings Username: Password: POP3 Server: Enter your incoming server information using your keypad. Security type: Port: 110 Delete from server: "Never" "Your login username". (This is your address) "The password for your account". mail.yourdomain.com (yourdomain.com here refers to the domain you have registered) "None" Tap "Next".

13 12 Step 5 : Outgoing server settings Enter your outgoing server information using your keypad. SMTP server: See Appendix A below Security type: "None" Port: "25" Require sign-in: DISABLE Tap "Next".

14 13 Step 6 : Account options Select the options according to your requirement. Tap "Next".

15 14 Step 7 : Set up Enter the final information to your account using your keypad. Give this account a name (Optional): "Your address". (This is the easiest way to differentiate between accounts if you have more than 1) Your name: "Your name as you want it to display on messages." Tap "Done".

16 The setup is now completed. You will now be brought to your account "Inbox" and you will see your s start to appear (if you do have s). 15

17 16 IPAD 1. If this is the first account you re setting up on the ipad tap from the Home screen tap Settings Then tap Mail, Contacts, Calendars -> Accounts Then tap Add Account. 2. Choose your account type. For setting up to work with your domain address, scroll down and tap Other.

18 17 3. In this Other screen, go to Mail and tap Add Mail Account 4. Enter your Name (First and Last), Address (full address), Password (remember to enter the EXACT password, paying attention to case) and a description for yourself. Then tap Next.

19 18 5. On the next screen IMAP and POP will be show on top on bar. Tap POP. 6. Fill in all as below POP info (if it is not already prepopulated for you): Name, name, Address (full address), and Description. Incoming Mail Server : Host Name: mail.yourdomain.co.za Username: (your full address) Password: (your password) Outgoing Mail Server: Host Name: mail.yourdomain.co.za Username: (your full address) Password: (your password)

20 19 Then tap Save. The device will then start verifying your account as indicated on your device. NOTE: Your device may take a full minute or longer to complete its Verification process. Please be patient.

21 20 7. If your device shows a message "Cannot Connect Using SSL: Do you want to try setting up the account without SSL?" Tap Yes. If your device shows a message as "Cannot verify server identity", tap Details and tap Accept. Congratulations, you have now successfully configured your account on your ipad.

22 21 N7000 GALAXY NOTE To set up on your Samsung Galaxy Note you will need: An account at an internet or provider. Login details of the incoming and outgoing mail servers. An active internet connection.

23 22 Step 1: Main Screen Go to the start screen. Choose Applications.

24 Step 2 23

25 24 Step 3 Choose . If this screen appears, choose the menu key, Accounts, the menu key, and then Add account. If this screen does not appear, go to the next step.

26 25 Step 4 Under address, enter your address. Under Password, enter the password of your account. Choose Manual setup.

27 26 Step 5 Choose POP3 account.

28 27 Step 6 Under User name, enter the username of your account. This is your address Under Password, enter the password of your account. Under POP3 server, enter mail.yourdomainname.co.za where yourdomainname.co.za is the name of your domain. Under Port, enter 110 Under Security type, choose None. Choose Next.

29 28 Step 7 Your data is verified. If this screen does not change, go 1 step back and verify your data.

30 29 Step 8 Under SMTP server, this depends on who your Internet Service Provider is. Consult Appendix A below for the correct server to enter here. Under Port, enter 25. Under Security type, choose None. Choose Require sign-in, and untick this option. Choose Next.

31 30 Step 9 Under check frequency, choose the mail checking interval. Choose Next.

32 31 Step 10 Under Give this account a name, Eg: enter My Account Under Your name, enter your name. Choose Done. Return to the Start screen.

33 32 Step 11 Start screen. Switch off the Samsung Galaxy Note and restart it in order to activate the settings. The setup is now successful. You can proceed with sending s.

34 33 APPENDIX A Your Outgoing (SMTP) Server is used for sending s. Your internet service provider (ISP) will supply you with the server name. Here is a list of the most common Outgoing servers: For Telkom ADSL, outgoing server is smtp.dsl.telkomsa.net or smtp.saix.net For Telkom Analogue Dial Up, use smtp.saix.net or smtp.dsl.telkomsa.net For 8TA (Eita), the outgoing server is smtp.saix.net For MWEB ADSL, outgoing server is smtp.mweb.co.za or smtp.mweb.net For Vodacom 3G, outgoing server is smtp.vodacom.co.za For MTN 3G, the outgoing server is mail.mtn.co.za For Cell C the outgoing server is mail.cmobile.co.za For Iburst, outgoing server is smtp.iburst.co.za For I.S. ADSL the outgoing server is smtp.isdsl.net For I.S. 3G the outgoing server is smtp.isgsm.netor smtp.dial-up.net For goggaconnect outgoing server is smtp.vodacom.co.za For Neotel, outgoing server is smtp.neomail.co.za For ABSA, outgoing server is smtp.absamail.co.za or mail.absa.co.za (ADSL,Dialup, ISDN) : smtp.lantic.net For NetActive (ADSL,Dialup, ISDN) : smtp.netactive.co.za For Polka (ADSL,Dialup, ISDN) : smtp.polka.co.za For Web Africa (ADSL,Dialup, ISDN) : smtp.wa.co.za