Travaux publics et Services gouvernementaux Canada. 1 See Part 2 for Clauses and Conditions Voir Partie 2 pour Clauses et Conditions RETURN BIDS TO:

Transcription

1 Public Works and Government Services Canada Travaux publics et Services gouvernementaux Canada 1 Part - Partie 1 of - de 2 1 See Part 2 for Clauses and Conditions Voir Partie 2 pour Clauses et Conditions RETURN BIDS TO: Title - Sujet RETOURNER LES SOUMISSIONS À: NMSO - LIFT TRUCKS Bid Receivg - PWGSC / Réception des soumissions Solicitation No. - N de l'vitation Date - TPSGC /B Laurier St. / 11, rue Laurier Client Reference No. - N de référence du client Amendment No. - N modif. Place du Portage, Phase III 003 Core 0A1 / Noyau 0A1 Gateau, Québec K1A 0S5 File No. - N de dossier CCC No./N CCC - FMS No./N VME Bid Fax: (819) hs631. GETS Reference No. - N de référence de SEAG PW-$$HS Date of Origal Request for Standg Offer Revision to a Request for a Standg Offer Date de la demande de l'offre à coandes origale Time Zone Révision à une demande d'offre à coandes Solicitation Closes - L'vitation prend f Fuseau horaire National Master Standg Offer (NMSO) at - à 02:00 PM Eastern Standard on - le Offre à coandes prcipale et nationale (OCPN) Time EST Address Enquiries to: - Adresser toutes questions à: Buyer Id - Id de l'acheteur Forcier, Domic hs631 The referenced document is hereby revised; unless Telephone No. - N de téléphone FAX No. - N de FAX otherwise dicated, all other terms and conditions of the Offer rema the same. (819) ( ) (819) Delivery Required - Livraison exigée Ce document est par la présente révisé; sauf dication contraire, les modalités de l'offre demeurent les mêmes. Destation - of Goods, Services, and Construction: Destation - des biens, services et construction: Coents - Coentaires Vendor/Firm Name and Address Raison sociale et adresse du fournisseur/de l'entrepreneur Security - Sécurité This revision does not change the security requirements of the Offer. Cette révision ne change pas les besos en matière de sécurité de la présente offre. Instructions: See Here Instructions: Voir aux présentes Issug Office - Bureau de distribution Industrial Vehicles & Machery Products Division 11 Laurier St./11, rue Laurier 7B1, Place du Portage, Phase III Gateau Québec K1A 0S5 Acknowledgement copy required Accusé de réception requis Signature Yes - Oui The Offeror hereby acknowledges this revision to its Offer. Le proposant constate, par la présente, cette révision à son offre. Date Name and title of person authorized to sign on behalf of offeror. (type or prt) Nom et titre de la personne autorisée à signer au nom du proposant. (taper ou écrire en caractères d'imprimerie) No - Non For the Mister - Pour le Mistre Canada Page 1 of - de 1

2 Solicitation No. - N de l'vitation Amd. No. - N de la modif. Buyer ID - Id de l'acheteur /B 003 hs631 hs631 Amendment 003 This amendment 003 is raised to answer questions as follows: 1. Questions and Answers: Question: In document "Specifications for Group 3A", under 1.4 Data Table, shows a maximum separation of ". Seeg that only 0.5% of reach type forklifts ordered have a straddle width greater than 42", would a " maximum separation be sufficient for the application? Answer: The numbers are based on widths available the brochures that were downloaded from the Internet. We will accept a new maximum separation of ( ches). The data table will be altered. Specification modifications - paragraph 1.4 Delete the followg rows of the Data Table their entirety. Insert the followg rows Question: In document "Specifications for Group 3B", under 1.4 Data Table, for Mast 5 and Mast 6 shows lift heights of 240" and ". These mast heights are unusual for this type of forklift as the forklift capacity would de-rate so much at those heights that it would make the unit unusable. Most forklifts that access these heights are accomplished with Stand-up rider reach style forklifts as they reta better capacity at those heights. With this md, would it be sufficient to elimate Mast 5 and Mast 6 from the specification? Answer: The numbers are based on heights available the brochures that were downloaded from the Internet. We will accept the elimation of Mast 6, but will reta Mast 5. The Data Table and the Accessory Table will be altered. Specification modifications - paragraph 1.4 Part - Partie 2 of - de 2 / Page 1 of - de 4

3 Solicitation No. - N de l'vitation Amd. No. - N de la modif. Buyer ID - Id de l'acheteur /B 003 hs631 hs631 Delete the followg rows of the Data Table their entirety. MAST 6 LIFT HEIGHT COLLAPSED HEIGHT FREE LIFT (e) 6,5 6,5 6,5 Specification modifications - paragraph Delete the followg row of the Accessory Table their entirety. MAST (e) Specification modifications - paragraph (e) Delete this clause its entirety. (e) Mast 6 - Mast 6, lieu of standard mast, which shall have a lift height and a free lift of at least that given as "MAST 6" - "LIFT HEIGHT" and "MAST 6" - FREE LIFT" the Data Table. Mast 6 shall have a collapsed mast height and a vehicle height of no more than that given as "MAST 6" - "COLLAPSED HEIGHT" the Data Table. Proof of Compliance shall be provided; and Question: In document "Specifications for Group 4A and specifications for Group 4B", under 1.4 Data Table, shows a mimum separation of " and a maximum separation of ". 99% of straddle and reach stackers sold North America are with the 38" to 42" Mimum/Maximum straddle separation area. Based on this would a " mimum and " maximum separation be sufficient for the application for both group 4A and Group 4B? Answer: The numbers are based on widths available the brochures that were downloaded from the Internet. We will accept a new mimum separation of 914 ( ches) and a new maximum separation of ( ches). The data tables will be altered. Insert the followg rows Part - Partie 2 of - de 2 / Page 2 of - de 4

4 Solicitation No. - N de l'vitation Amd. No. - N de la modif. Buyer ID - Id de l'acheteur /B 003 hs631 hs631 Specification modifications - Specification 4B - paragraph 1.4 Delete the followg rows of the Data Table their entirety Insert the followg rows Question: In document "Specifications for Group 6", under 1.4 Data Table, shows heights referred to as "Platform Height". Is this measurement the height to the bottom or the top of the platform? Is there a top beam level measurement requirement the application where an auxiliary mast would need to go above the bottom of the platform to reach the top beam pallet? Answer: The measurement is to the top of the platform. This provides the operator with a pickg height of at least 1,520 (60 ches) above the top of the platform. The standard lift height of the auxiliary lift is at least 1,600 for the capacities we have chosen. We have not chosen a top beam level measurement requirement. No alteration to the specification is required. Question: In document "Specifications for Group 6", under (c) Backrest, is not supplied with this type of forklift as the fork carriage acts as a load support under ANSI regulations. Is it acceptable to supply this type of forklift unit without a load backrest? Answer: This is acceptable - No extensions to the top of the fork carriage are required - This is considered to be the manufacturer's standard. No alteration to the specification is required. Question: For group 3A, configuration B, the mast calls for a collapsed and 198 elevated when the Configuration A and C is 192. Will an elevated 192 for Configuration B be acceptable? Answer: This will be acceptable and will be amended our documentation. Part - Partie 2 of - de 2 / Page 3 of - de 4

5 Solicitation No. - N de l'vitation Amd. No. - N de la modif. Buyer ID - Id de l'acheteur /B 003 hs631 hs631 Question: In the larger battery trucks I have a concern about the charger specifications for 120v 1 ph and ph will not accoodate for the amp draw that they would need to get a full charge. This would affect groups 2, 3, 5 and 6. Answer: This has been addressed and amended our documentation. Question: In the conference we had a question if a charger must be cluded the price of the truck or will it be separated as a chosen option? Answer: This has been addressed and we have removed the chargers as a standard component and now have it as an accessory. All other terms and conditions rema the same. Part - Partie 2 of - de 2 / Page 4 of - de 4