Blindklinknagel catalogus Blind Rivet Catalogue

Transcription

1 Bindkinknage cataogus Bind Rivet Cataogue

2 In spite of the constant care and attention to ensure the accuracy of the information on this cataogue, Masterfix assumes no responsibiity therefore. A content is provided as is and as avaiabe Masterfix hereby expressy discaims any representations of warranties of any kind. Notes

3 Masterfix One-stop shopping for the bind riveting distributor market Masterfix Products is one of Europe's main bind riveting technique professionas. We owe our exceent reputation to our successfu distribution of the broadest range of bind rivets, bind rivet nuts and bots in the business, and by offering extremey competitive prices and a reiabe and continuous stock suppy. The same goes for our ine of accompanying hand- and power toos. Our success is a resut of more than 25 years of experience in the industry and by focusing on suppying our product range soey through the distributor market for bind fasteners and accompanying toos. In doing so we have become the eading name used in the fied of service & repair and sma-to-medium sized industry. Over 20 years ago we aready ventured into reations with a reiabe co-partner in the Far East, which resuted into a joint venture operation. Because of this we are abe to have a eading roe in the product range, the technique and quaity deivered, and can do this in a very cost efficient way. Saes & Marketing The Masterfix Group is spread out through Europe with branches in Spain, Poand, The United Kingdom and a head office in the Netherands. Our internationa saes teams are in cose contact with our partners as we as each other. This enabes us to continuousy monitor and evauate the fied to make sure we stay in touch with the industry and on top of the market. In doing so we provide our cients with a we baanced and usefu program, adjusted to market needs and ready to adapt to future deveopments. The internationa Masterfix customer service centres are staffed by thoroughy trained muti-ingua professionas as are our regiona service and repair centres, representing Masterfix throughout Europe and beyond. We frequenty wecome technica and commercia representatives of our partners in our Internationa Training Center. Here they earn hands-on about the techniques of bind riveting with practica exampes that show our products extensive range of possibe appications. Masterfix

4 We have modern, we stocked warehouses at our disposa at a Internationa Masterfix ocations. We therefore are abe to guarantee a reiabe and continuous product suppy to our cients. Research & Deveopment Having our own R & D department enabes us to transate partners wishes as we as market demands into appicabe and usefu new products. The introduction of the cosed end rivet into the European market as eary as 1985, was one of Masterfix first innovations. The introduction of the EZM 12 hand too with transmission of power being one of the atest. We continuousy work on providing our cients with a reiabe and affordabe ine of rivets and rivet nuts and an advanced and practica ine of hand and power toos. On our website you find information about our operations in 6 different anguages, as we technica information on a our products. Here we aso keep our partners up to date on technica as we as practica deveopments, trade show participation of a our internationa offices, as we as company and industry news. You can simpy order a priceist by fiing out the request form on our website. Masterfix

5 Contents Rivets DH dome head LH arge head ELH extra arge head CSH countersunk head High strength Cosed end Specias Standard open type Muti grip Bind rivets MFX 1001 PLIA DH Au./ 10 MFX 1002 PLIA LH Au./ 11 MFX 1003 PLIA ELH Au./ 12 MFX 1004 PLIA CSH Au./ 13 MFX 1171 PLIA DH Au.(white)/ 14 MFX 1181 PLIA DH Au.(back)/ 15 MFX 1441 PLIA DH Au./Stain. 16 MFX 1443 PLIA ELH Au./Stain. 17 MFX 1444 PLIA CSH Au./Stain. 18 MFX 1451 PLIA DH Stain./Stain. 19 MFX 1461 PLIA DH / 20 MFX 1031 Open type DH Au./ 22 MFX 1032 Open type LH Au./ 25 MFX 1033 Open type ELH Au./ 26 MFX 1034 Open type CSH Au./ 27 MFX 1021 Open type DH Au./Au. 28 MFX 1071 Open type DH Au./Stain. 29 MFX 1041 Open type DH / 30 MFX 1044 Open type CSH / 32 MFX 1051 Open type DH Stain./Stain. 33 MFX 1052 Open type LH Stain./Stain. 34 MFX 1541 Open type DH Stain./Stain. A4 35 MFX 1054 Open type CSH Stain./Stain. 36 MFX 1101 Open type DH Copper/ 37 MFX 1151 Open type DH Copper/Bronze 38 MFX 1301 Pee type DH Au./ 40 MFX 1361 TRIFORM DH Au./Au. 41 MFX 1601 Grooved type DH Au./ 42 MFX 1803 HAMMERDRIVE ELH Au./Stain. 43 MFX 1201 Cosed end DH Au./ 45 MFX 1204 Cosed end CSH Au./ 46 MFX 1211 Cosed end DH Au./Au. 47 MFX 1231 Cosed end DH Au./Stain. 48 MFX 1234 Cosed end CSH Au./Stain. 49 MFX 1241 Cosed end DH / 50 MFX 1261 Cosed end DH Stain./Stain. 51 MFX 1251 Cosed end DH Copper/ 52 MFX 1281 Cosed end DH Copper/Stain. 53 MFX 1611 MASTERBULB DH Stain./Stain. 55 MFX 1621 MASTERBULB DH / 56 MFX 1761 P-LOCK DH / 58 MFX 1471 MASTERLOCK DH / 59 Contents

6 Contents High Strength MFX 1561 MASTERLOCK DH / 60 MFX 1474 MASTERLOCK CSH / 61 MFX 1511 MASTERLOCK DH Au./Au. 62 MFX 1514 MASTERLOCK CSH Au./Au. 63 Hand toos 64 Power toos 69 DH LH ELH CSH dome head age head extra arge head countersunk head Bind Rivet Nut cataogue downoad or request hard copy at 6 Contents

7 Bind rivets

8 Bind rivets The time and costs saving technoogy of bind riveting is simpe. The materias to be riveted ony have to be reached from one side, which expains the term "bind" riveting. The rivet is made of two parts namey, the body and the mandre. The body is deformed when the rivet is set and it is this part which camps the materias together. The function of the mandre is to deform the body of the rivet. The mandre is therefore aways stronger than the body. The mandre breaks off at its specific breaking point. This breaking point ensures that the mandre breaks off at the right moment so that the body is correcty deformed, and the materias are camped together in a correct way. Info

9 PLIA, a first cass job turned out every time Perhaps this is the best way to describe the Masterfix PLIA range of bind rivets. Masterfix PLIA rivets is a wide range of Mutigrip rivets, offering substantia technica advantages over standard bind rivets, because of its specia construction. This technique which was originay deveoped for the industry has been impemented in our standard PLIA range, which aso incudes a stee PLIA and a stainess stee PLIA with grooved mandre for extra grip on the jaws. What makes PLIA different from ordinary standard rivets? A arge bub is formed at the back, spreading the camping oad over a wide area After setting, the mandre is retained in the rivet which makes it vibration resistant A hoe fiing property, so the size of the predried hoe is ess critica Large camping capacity, so a significant reduction of stock can be achieved PLIA is avaiabe with the foowing head shapes: Dome head Large fange Extra arge head Countersunk head materias: Auminium/ Auminium/Stainess stee / Stainess stee/stainess stee Appications Combinations of hard and soft materias Automotive, furniture & construction industry HVAC appications White goods Repair & service industry Info

10 MFX 1001 Auminium [AMg2,5] Zinc pated PLIA mutigrip dome head Item nr. k k m p 3,0 6,0 0,5-3,0 * [+0,05/-0,13] 8,0 0,5-5,0 * ,0 2,5-7,0 *3010 Ø 3,1 [3,3 max] 12,0 4,5-9, ,2 6,0 0,5-3, [+0,05/-0,13] 8,0 0,5-5, ,5 2,0-6, Ø 3,3 [3,5 max] 10,0 2,5-7, ,1 3,5-8, ,0 4,5-9, ,7 5,5-9, ,0 6,5-11, ,0 8,5-13, ,0 6,0 0,5-2,5 * [+0,05/-0,13] 8,0 0,5-4,5 *4008 9,5 1,0-6, Ø 4,1 [4,3 max] 10,0 1,5-6,5 * ,0 3,5-8,5 * ,7 4,0-9, ,0 5,5-10,5 * ,0 7,5-12,5 * ,0 8,5-13, ,0 9,5-14,5 * ,0 11,5-16, ,8 10,0 0,5-5,0 * [+0,05/-0,13] 10,3 0,5-5, ,0 2,0-7,0 *4812 Ø 4,9 [5,2 max] 14,0 4,0-9,0 * ,1 5,0-10, ,0 6,0-11,0 * ,0 7,0-12, ,0 8,0-13,0 * ,0 10,0-15,0 * ,0 12,0-17, ,0 14,0-19, ,8 14,5-19,5 *4825 6,0 [+/-0,24] 6,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] 1,4 ~1, ,4 ~1, ,7 ~2, ,0 ~2, Bind rivets

11 MFX 1002 Auminium [AMg2,5] Zinc pated PLIA mutigrip arge head *Item nr. k k m p 3,2 8,0 05,-5, [+0,05/-0,13] 9,5 2,0-6, ,0 2,5-7, Ø 3,3 [3,5 max] 11,1 3,5-8, ,0 4,5-9, ,0 6,5-11, ,0 8,5-13, ,0 8,0 0,5-4, [+0,05/-0,13] 10,0 1,5-6, ,1 2,5-7, Ø 4,1 [4,3 max] 12,0 3,5-8, ,7 4,0-9, ,0 5,5-10, ,0 7,5-12, ,0 8,5-13, ,0 9,5-14, ,0 11,5-16, ,8 10,0 0,5-5,0 * [+0,05/-0,13] 12,0 2,0-7,0 * ,0 4,0-9,0 *4814 Ø 4,9 [5,2 max] 16,0 6,0-11,0 * ,0 8,0-13,0 * ,0 10,0-15,0 *4820 9,5 [+0/-0,5] 12,0 [+0/-0,5] 14,0 [+0/-0,5] 2,0 ~1, ,5 ~2, ,5 ~2, * these rivets of ranges 1001 and 1002 are aso avaiabe in bister pack. Bind rivets 11

12 MFX 1003 Auminium [AMg2,5] Zinc pated PLIA mutigrip extra arge head Item nr. k k m p 4,8 10,0 0,5-5, [+0,05/-0,13] 10,3 0,5-5, ,0 2,0-7, Ø 4,9 [5,2 max] 14,0 4,0-9, ,0 6,0-11, ,0 7,0-12, ,0 8,0-13, ,0 10,0-15, ,0 12,0-17, ,0 14,0-19, ,8 14,5-19, ,0 16,0-22, ,0 [+0,5/-0,8] 2,5 ~2, Bind rivets

13 MFX 1004 Auminium [AMg2,5] Zinc pated PLIA mutigrip countersunk head Item nr. k k m p 3,2 8,0 1,5-5, [+0,05/-0,13] 9,7 2,5-6, ,0 2,5-7, Ø 3,3 [3,5 max] 12,0 4,5-9, ,0 8,0 1,5-4, [+0,05/-0,13] 10,0 1,5-6, ,3 2,5-7, Ø 4,1 [4,3 max] 12,0 3,5-8, ,0 5,5-10, ,8 10,0 1,5-5, [+0,05/-0,13] 12,0 2,0-7, ,0 4,0-9, Ø 4,9 [5,2 max] 16,0 6,0-11, ,9 7,0-12, ,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] - ~1, ~2, ~2, Bind rivets 13

14 MFX 1171 Auminium [AMg2,5] Zinc pated PLIA mutigrip dome head white Item nr. k k m p 3,2 6,0 0,5-3, [+0,05/-0,13] 8,0 0,5-5, ,5 2,0-6, Ø 3,3 [3,5 max] 10,0 2,5-7, ,1 3,5-8, ,0 4,5-9, ,7 5,5-9, ,0 6,5-11, ,0 8,5-13, ,0 6,0 0,5-2, [+0,05/-0,13] 8,0 0,5-4, ,5 1,0-6, Ø 4,1 [4,3 max] 10,0 1,5-6, ,0 3,5-8, ,7 4,0-9, ,0 5,5-10, ,0 7,5-12, ,0 8,5-13, ,0 9,5-14, ,0 11,5-16, ,8 10,0 0,5-5, [+0,05/-0,13] 10,3 0,5-5, ,0 2,0-7, Ø 4,9 [5,2 max] 14,0 4,0-9, ,1 5,0-10, ,0 6,0-11, ,0 7,0-12, ,0 8,0-13, ,0 10,0-15, ,0 12,0-17, ,0 14,0-19, ,8 14,5-19, ,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] 1,4 ~1, ,7 ~2, ,0 ~2, Bind rivets

15 MFX 1181 Auminium [AMg2,5] Zinc pated PLIA mutigrip dome head back Item nr. k k m p 3,2 6,0 0,5-3, [+0,05/-0,13] 8,0 0,5-5, ,5 2,0-6, Ø 3,3 [3,5 max] 10,0 2,5-7, ,1 3,5-8, ,0 4,5-9, ,7 5,5-9, ,0 6,5-11, ,0 8,5-13, ,0 6,0 0,5-2, [+0,05/-0,13] 8,0 0,5-4, ,5 1,0-6, Ø 4,1 [4,3 max] 10,0 1,5-6, ,0 3,5-8, ,7 4,0-9, ,0 5,5-10, ,0 7,5-12, ,0 8,5-13, ,0 9,5-14, ,0 11,5-16, ,8 10,0 0,5-5, [+0,05/-0,13] 10,3 0,5-5, ,0 2,0-7, Ø 4,9 [5,2 max] 14,0 4,0-9, ,1 5,0-10, ,0 6,0-11, ,0 7,0-12, ,0 8,0-13, ,0 10,0-15, ,0 12,0-17, ,0 14,0-19, ,8 14,5-19, ,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] 1,4 ~1, ,7 ~2, ,0 ~2, Bind rivets 15

16 MFX 1441 Auminium [AMg2,5] Stainess stee [A2] PLIA mutigrip dome head Item nr. k k m p 3,2 8,0 0,5-5, [+0,05/-0,13] 9,5 2,0-6, ,1 3,5-8, Ø 3,3 [3,5 max] 4,0 9,5 1,0-6, [+0,05/-0,13] 12,7 4,0-9, ,9 8,5-13, Ø 4,1 [4,3 max] 4,8 10,3 0,5-5, [+0,05/-0,13] 15,1 5,0-10, ,9 7,0-12, Ø 4,9 [5,2 max] 24,8 14,5-19, ,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] 1,4 ~1, ,7 ~2, ,0 ~2, Bind rivets

17 MFX 1443 Auminium [AMg2,5] Stainess stee [A2] PLIA mutigrip extra arge head Item nr. k k m p 3,2 8,0 0,5-5, [+0,05/-0,13] 9,5 2,0-6, ,1 3,5-8, Ø 3,3 [3,5 max] 4,0 12,7 4,0-9, [+0,05/-0,13] 16,9 8,5-13, ,5 [+0/-0,5] 12,0 [+0/-0,5] 2,0 ~1, ,5 ~2, Ø 4,1 [4,3 max] 4,8 10,3 0,5-5, [+0,05/-0,13] 16,9 7,0-12, ,8 14,5-19, Ø 4,9 [5,2 max] 16,0 [+0/-0,5] 2,5 ~2, Bind rivets 17

18 MFX 1444 Auminium [AMg2,5] Stainess stee [A2] PLIA mutigrip countersunk head Item nr. k k m p 3,2 9,7 2,0-6, ,0 - ~1, [+0/-0,5] [+0,05/-0,13] Ø 3,3 [3,5 max] 4,0 9,5 1,5-6, [+0,05/-0,13] 11,3 3,0-8, ,5 [+0/-0,5] - ~2, Ø 4,1 [4,3 max] 4,8 12,1 2,0-7, [+0,05/-0,13] 16,9 7,0-12, ,0 [+0/-0,5] - ~2, Ø 4,9 [5,2 max] 18 Bind rivets

19 MFX 1451 Stainess stee [A2] Stainess stee [A2] PLIA mutigrip dome head [+1/- 0,3] Item nr. k [nom.] k [max.] m p 3,2 [+0,08/-0,15] 9,9 1,0-4, ,4 1,02 ~2, Ø 3,3 4,0 12,0 1,6-6, [+0,08/-0,15] 13,6 3,2-8, ,9 1,27 ~2, ,8 6,4-11, Ø 4,1 4,8 12,7 1,6-6, [+0,08/-0,15] 14,3 3,2-8, ,5 6,4-11, ,5 1,52 ~3, Ø 4,9 19,3 8,0-12, Bind rivets 19

20 MFX 1461 Zinc pated Zinc pated PLIA mutigrip dome head Item nr. k [nom.] k [max.] m p 3,2* [+0,08/-0,15] 11,4 1,6-6, ,4 1,02 ~2, Ø 3,3 4,0* 12,0 1,6-6, [+0,08/-0,15] 13,6 3,2-8, ,9 1,27 ~2, Ø 4,1 4,8 12,7 1,6-6, [+0,08/-0,15] 14,3 3,2-8, ,5 1,52 ~3, ,3 8,0-12, Ø 4,9 * do NOT have grooved mandres 20 Bind rivets

21 Masterfix Standard bind rivets The diversity in standard rivets is enormous, in aoys as we as in (head) types: from copper or stainess dome head to auminium with extra arge fange. The standard rivet with dome head, is on request aso avaiabe in different RAL-coors. Appications Automotive industry Furniture industry Heating & air conditioning Domestic appiances Containers Etc. Info

22 MFX 1031 Auminium [AMg2,5/3,5] Zinc pated open type dome head Item nr. k k m p 2,4 4,0 ~2, [+0,08/-0,10] 6,0 2,0-4, ,0 4,0-6, ,0 [+0/-0,7] 0,7 [+/-0,15] ~1, Ø 2,5 10,0 6,0-8, ,0 4,0 ~1, [+0,08/-0,10] 6,0 1,5-3, ,0 3,5-5, Ø 3,1 10,0 5,5-7, ,0 7,5-9, ,5 [+0/-0,7] 0,8 [+/- 0,2] ~1, ,0 9,5-11, ,0 11,5-13, ,2 4,0 ~1, [+0,08/-0,10] 6,0 1,5-3, ,0 3,5-5, Ø 3,3 10,0 5,5-7, ,0 7,5-9, ,0 9,5-11, ,5 [+0/-0,7] 0,8 [+/- 0,2] ~1, ,0 11,5-13, ,0 13,5-15, ,0 15,5-17, ,0 6,0 1,5-3, [+0,08/-0,15] 8,0 3,0-5, ,0 5,0-6, Ø 4,1 12,0 6,5-8, ,0 8,5-10, ,0 10,5-12, ,0 [+0/-1,0] 1,0 [+/- 0,3] ~2, ,0 12,5-14, ,0 14,5-16, ,0 16,5-19, ,0 19,0-21, Bind rivets

23 MFX 1031 Auminium [AMg2,5/3,5] Zinc pated open type dome head Item nr. k k m p 4,8 6,0 1,0-3, [+0,08/-0,15] 8,0 3,0-4, ,0 4,5-6, Ø 4,9 12,0 6,0-8, ,0 8,0-10, ,0 10,0-12, ,0 12,0-14, ,0 14,0-16, ,5 [+0/-1,0] 1,1 [+/- 0,3] ~2, ,0 16,0-18, ,0 18,0-21, ,0 21,0-23, ,0 23,5-25, ,0 25,0-30, ,0 30,0-35, ,0 6,0 1,0-3, [+0,08/-0,15] 8,0 3,0-4, ,0 4,5-6, Ø 5,1 12,0 6,0-8, ,0 8,0-10, ,0 10,0-12, ,0 12,0-14, ,0 14,0-17, ,5 [+0/-1,0] 1,1 [+/- 0,3] ~2, ,0 17,0-20, ,0 20,0-23, ,0 23,0-25, ,0 25,0-30, ,0 30,0-35, ,0 8,0 2,0-4, [+0,08/-0,15] 10,0 4,0-6, ,0 6,0-8, Ø 6,1 14,0 7,0-9, ,0 9,0-11, ,0 11,0-13, ,0 [+0/-1,5] 1,5 [+/- 0,4] ~3, ,0 13,0-17, ,0 17,0-20, ,0 20,0-24, Bind rivets 23

24 MFX 1031 Auminium [AMg2,5/3,5] Zinc pated open type dome head Item nr. k k m p 6,4 10,0 2,0-5, [+0,08/-0,15] 12,0 4,0-6, ,0 6,0-9, Ø 6,5 18,0 9,0-13, ,0 13,0-16, ,0 [+0/-1,5] 1,8 [+/- 0,4] ~3, ,0 16,0-20, ,0 18,0-24, Bind rivets

25 MFX 1032 Auminium [AMg3,5] Zinc pated open type arge head Item nr. k k m p 3,2 6,0 1,5-3, [+0,08/-0,10] 8,0 3,5-5, ,0 5,5-7, Ø 3,3 12,0 7,5-9, ,0 9,5-11, ,0 6,0 1,5-3, [+0,08/-0,15] 8,0 3,0-5, ,0 5,0-6, Ø 4,1 12,0 6,5-8, ,0 8,5-10, ,0 10,5-12, ,8 8,0 3,0-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,0-8, Ø 4,9 14,0 8,0-10, ,0 10,0-12, ,0 12,0-14, ,0 14,0-16, ,0 16,0-18, ,0 18,0-21, ,0 19,5-22, ,0 21,0-23, ,0 23,0-25, ,0 25,0-30, ,0 8,0 3,0-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,0-8, Ø 5,1 14,0 8,0-10, ,0 10,0-12, ,0 12,0-14, ,0 14,0-17, ,0 17,0-20, ,5 [+0/-0,5] 12,0 [+0/-0,5] 14,0 [+0/-0,5] 14,0 [+0/-0,5] 2,0 ~1, ,5 ~2, ,5 ~2, ,5 ~2, Bind rivets 25

26 MFX 1033 Auminium [AMg3,5] Zinc pated open type extra arge head Item nr. k k m p 4,8 10,0 4,5-6, [+0,08/-0,15] 12,0 6,0-8, ,0 8,0-10, Ø 4,9 16,0 10,0-12, ,0 12,0-14, ,0 14,0-16, ,0 16,0-18, ,0 18,0-20, ,0 20,0-22, ,0 [+0/-0,5] 2,5 ~2, Bind rivets

27 MFX 1034 Auminium [AMg2,5/3,5] Zinc pated open type countersunk head Item nr. k k m p 2,4 6,0 2,0-4, [+0,08/-0,10] 8,0 4,0-6, ,0 6,0-8, Ø 2,5 3,0 6,0 1,5-3, [+0,08/-0,10] 8,0 3,5-5, ,0 5,5-7, Ø 3,1 12,0 7,5-9, ,2 6,0 1,5-3, [+0,08/-0,10] 8,0 3,5-5, ,0 5,5-7, Ø 3,3 12,0 7,5-9, ,0 9,5-11, ,0 6,0 1,5-3, [+0,08/-0,15] 8,0 3,0-5, ,0 5,0-6, Ø 4,1 12,0 6,5-8, ,0 8,5-10, ,0 10,5-12, ,8 8,0 3,0-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,0-8, Ø 4,9 14,0 8,0-10, ,0 10,0-12, ,0 12,0-14, ,0 14,0-16, ,0 18,0-21, ,0 8,0 3,0-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,0-8, Ø 5,1 14,0 8,0-10, ,0 10,0-12, ,0 12,0-14, ,0 14,0-17, ,0 17,0-20, ,0 [+0/-0,4] 6,0 [+0/-0,4] 6,0 [+0/-0,4] 7,5 [+0/-0,5] 9,0 [+0/-0,5] 9,0 [+0/-0,5] - ~1, ~1, ~1, ~2, ~2, ~2, Bind rivets 27

28 MFX 1021 Auminium [AMg2,5] Auminium open type dome head Item nr. k k m p 3,2 6,0 1,5-3, [+0,08/-0,10] 8,0 3,5-5, ,0 5,5-7, Ø 3,3 12,0 7,5-9, ,5 [+0/-0,7] 0,8 [+/-0,2] ~1, ,0 9,5-11, ,0 11,5-13, ,0 6,0 1,5-3, [+0,08/-0,15] 8,0 3,0-5, ,0 5,0-7, Ø 4,1 12,0 7,0-9, ,0 [+0/-1,0] 1,0 [+/-0,3] ~2, ,0 9,0-11, ,0 11,0-13, ,8 8,0 2,5-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,5-8, Ø 4,9 14,0 8,5-10, ,0 10,5-12, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, ,0 12,5-14, ,0 14,5-16, ,0 19,5-21, Bind rivets

29 MFX 1071 Auminium [AMg3] Stainess stee [A2] open type dome head Item nr. k k m p 3,0 6,0 1,5-3, [+0,08/-0,10] 8,0 3,5-5, ,0 5,5-7, ,5 [+0/-0,7] 0,8 [+/-0,2] ~1, Ø 3,1 12,0 7,0-9, ,2 6,0 1,5-3, [+0,08/-0,10] 8,0 3,5-5, ,0 5,5-7, ,5 [+0/-0,7] 0,8 [+/-0,2] ~1, Ø 3,3 12,0 7,0-9, ,0 6,0 1,0-3, [+0,08/-0,15] 8,0 3,0-5, ,0 5,0-7, ,0 [+0/-1,0] 1,0 [+/-0,3] ~2, Ø 4,1 12,0 7,0-9, ,8 8,0 2,5-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,5-8, Ø 4,9 14,0 8,5-10, ,0 10,5-12, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, ,0 12,5-14, ,0 14,5-16, ,0 8,0 2,5-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,5-8, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, Ø 5,1 16,0 10,5-12, Bind rivets 29

30 MFX 1041 Zinc pated Zinc pated open type dome head Item nr. k k m p 3,0 6,0 1,5-3, [+0,08/-0,10] 8,0 3,0-5, ,0 5,0-7, Ø 3,1 12,0 7,0-9, ,5 [+0/-0,7] 0,8 [+/-0,2] ~1, ,0 9,0-11, ,2 6,0 1,5-3, [+0,08/-0,10] 8,0 3,0-5, ,0 5,0-7, Ø 3,3 12,0 7,0-9, ,5 [+0/-0,7] 0,8 [+/-0,2] ~2, ,0 9,0-11, ,0 11,0-13, ,0 6,0 1,5-2, [+0,08/-0,15] 8,0 2,5-4, ,0 4,5-6, Ø 4,1 12,0 6,5-8, ,0 8,5-10, ,0 [+0/-1,0] 1,0 [+/-0,3] ~2, ,0 10,5-12, ,0 12,5-14, ,0 14,5-16, ,8 6,0 1,0-2, [+0,08/-0,15] 8,0 2,5-4, ,0 4,5-6, Ø 4,9 12,0 6,0-8, ,0 8,0-10, ,0 10,0-11, ,0 11,5-13, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, ,0 13,5-15, ,0 15,0-17, ,0 17,0-20, ,0 20,0-23, ,0 23,0-26, ,0 8,0 2,5-4, [+0,08/-0,15] 10,0 4,0-6, ,0 6,0-8, Ø 5,1 14,0 8,0-10, ,0 10,0-11, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, ,0 11,5-13, ,0 13,5-15, Bind rivets

31 MFX 1041 Zinc pated Zinc pated open type dome head Item nr. k k m p 6,0 12,0 3,5-6, [+0,08/-0,15] 15,0 6,5-9, ,0 9,5-12, Ø 6,1 22,0 13,5-16, ,0 [+0/-1,5] 1,5 [+/-0,4] ~3, ,0 17,5-20, ,0 21,5-24, ,4 12,0 3,5-6, [+0,08/-0,15] 15,0 6,5-9, ,0 9,5-12, Ø 6,5 22,0 14,5-16, ,0 [+0/-1,5] 1,8 [+/-0,4] ~3, ,0 18,5-20, ,0 22,5-24, Bind rivets 31

32 MFX 1044 Zinc pated Zinc pated open type countersunk head Item nr. k k m p 3,0 6,0 1,5-3, [+0,08/-0,10] 8,0 3,0-5, ,0 5,0-7, Ø 3,1 12,0 7,0-9, ,2 6,0 1,5-3, [+0,08/-0,10] 8,0 3,0-5, ,0 5,0-7, Ø 3,3 12,0 7,0-9, ,0 6,0 1,5-2, [+0,08/-0,15] 8,0 2,5-4, ,0 4,5-6, Ø 4,1 12,0 6,5-8, ,0 8,5-10, ,0 10,5-12, ,8 8,0 2,5-4, [+0,08/-0,15] 10,0 4,5-6, ,0 6,0-8, Ø 4,9 14,0 8,0-10, ,0 10,0-11, ,0 11,5-13, ,0 13,5-15, ,0 [+0/-0,4] 6,0 [+0/-0,4] 7,5 [+0/-0,5] 9,0 [+0/-0,5] - ~1, ~2, ~2, ~2, * these rivets of range 1051 are aso avaiabe in bister pack. 32 Bind rivets

33 MFX 1051 Stainess stee [A2] Stainess stee [A2] open type dome head Item nr. k k m p 3,0 6,0 1,5-2,5 * [+0,08/-0,10] 8,0 2,5-4,5 * ,0 4,5-6,5 *3010 6,5 [+0/-0,7] 0,8 [+/-0,2] ~1, Ø 3,1 12,0 6,5-8,5 *3012 3,2 4,0 ~1, [+0,08/-0,10] 6,0 1,5-2, ,0 2,5-4, Ø 3,3 10,0 4,5-6, ,0 6,5-8, ,5 [+0/-0,7] 0,8 [+/-0,2] ~2, ,0 8,5-12, ,0 12,0-15, ,0 6,0 ~2, [+0,08/-0,15] 8,0 2,0-4,0 * ,0 4,0-6,0 *4010 Ø 4,1 13,0 7,0-9,0 * ,0 10,0-12,0 *4016 8,0 [+0/-1,0] 1,0 [+/-0,3] ~2, ,0 12,0-14, ,0 14,0-16, ,8 8,0 1,5-3,0 * [+0,08/-0,15] 10,0 3,0-5,0 * ,0 5,0-7,0 *4812 Ø 4,9 14,0 7,0-9, ,0 9,0-11,0 *4816 9,5 [+0/-1,0] 1,1 [+/-0,3] ~2, ,0 11,0-13,0 * ,0 13,0-15,0 *4820 5,0 8,0 1,5-3, [+0,08/-0,15] 10,0 3,0-5, ,0 5,0-7, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, Ø 5,1 16,0 9,0-11, ,0 12,0 4,0-6, [+0,08/-0,15] 15,0 6,0-9, ,0 9,0-12, ,0 [+0/-1,5] 1,5 [+/-0,4] ~3, Ø 6,1 20,0 11,0-14, ,4 12,0 4,5-6, [+0,08/-0,15] 15,0 6,5-9, ,0 9,5-12, Ø 6,5 20,0 11,5-14, ,0 [+0/-1,5] 2,1 [+/-0,4] ~3, ,0 17,0-20, Bind rivets 33

34 MFX 1052 Stainess stee [A2] Stainess stee [A2] open type arge head Item nr. k k m p 4,8 8,0 1,5-3, [+0,08/-0,15] 10,0 3,0-5, ,0 5,0-7, Ø 4,9 14,0 7,0-9, [+0/-1,0] 1,8 [+/-0,3] ~2, ,0 9,0-11, Bind rivets

35 MFX 1541 Stainess stee [A4] Stainess stee [A4] open type dome head Item nr. k k m p 3,0 6,0 1,5-2, [+0,08/-0,10] 8,0 2,5-4, ,0 4,5-6, ,5 [+0/-0,7] 0,8 [+/-0,2] ~1, Ø 3,1 3,2 6,0 1,5-2, [+0,08/-0,10] 8,0 2,5-4, ,0 4,5-6, ,5 [+0/-0,7] 0,8 [+/-0,2] ~2, Ø 3,3 12,0 6,5-8, ,0 6,0 ~2, [+0,08/-0,15] 8,0 2,0-4, ,0 4,0-6, Ø 4,1 13,0 7,0-9, ,0 [+0/-1,0] 1,0 [+/-0,3] ~2, ,0 10,0-12, ,8 8,0 1,5-3, [+0,08/-0,15] 10,0 3,0-5, ,0 5,0-7, Ø 4,9 14,0 7,0-9, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, ,0 9,0-11, ,0 11,0-13, Bind rivets 35

36 MFX 1054 Stainess stee [A2] Stainess stee [A2] open type countersunk head Item nr. k k m p 3,2 6,0 1,5-2, [+0,08/-0,10] 8,0 2,5-4, ,0 4,5-6, Ø 3,3 12,0 6,5-8, ,0 6,0 ~2, [+0,08/-0,15] 8,0 2,0-4, ,0 4,0-6, Ø 4,1 12,0 6,0-8, ,0 9,0-11, ,8 8,0 1,5-3, [+0,08/-0,15] 10,0 3,0-5, ,0 5,0-7, Ø 4,9 15,0 8,0-10, ,0 11,0-13, ,0 14,0-16, ,0 18,0-20, ,0 [+0/-0,4] 7,5 [+0/-0,5] 9,0 [+0/-0,5] - ~2, ~2, ~2, Bind rivets

37 MFX 1101 Copper Zinc pated open type dome head Item nr. k k m p 3,0 6,0 1,0-3, [+0,08/-0,10] 8,0 3,0-5, ,0 5,0-7, ,5 [+0/-0,7] 0,8 [+/-0,2] ~1, Ø 3,1 12,0 7,0-9, ,2 6,0 1,0-3, [+0,08/-0,10] 8,0 3,0-5, ,0 5,0-7, ,5 [+0/-0,7] 0,8 [+/-0,2] ~1, Ø 3,3 12,0 7,0-9, ,0 6,0 1,0-2, [+0,08/-0,15] 8,0 2,5-4, ,0 4,5-6, Ø 4,1 12,0 6,5-8, ,0 [+0/-1,0] 1,0 [+/-0,3] ~2, ,0 8,5-10, ,0 10,5-12, ,8 8,0 1,5-3, [+0,08/-0,15] 10,0 3,5-5, ,0 5,5-7, Ø 4,9 14,0 7,5-9, ,5 [+0/-1,0] 1,1 [+/-0,3] ~2, ,0 9,5-11, Bind rivets 37

38 MFX 1151 Copper Bronze open type dome head [+/-0,10] Item nr. k k m p 3,2 5,0 2,0-3, [+0/-0,05] 6,0 2,5-3, ,0 3,0-4, Ø 3,3 9,0 4,0-6, ,2 [+/-0,2] 0,8 [+/-0,2] ~2, ,0 5,0-7, ,0 7,0-9, Bind rivets

39 Masterfix Standard bind rivets for specia appications In addition to the standard range of bind rivets, Masterfix offers the suppy of many other types of bind rivets for specific appications from stock. Pee rivets for appications in soft materias such as Wood Insuation Pastics Pasterboard TRIFORM rivets for appications in soft materias such as Wood Insuation Pastics Pasterboard Grooved rivets for appications in materias such as Wood Pastics, e.g. fight cases HAMMERDRIVE for appications in materias such as Brick and concrete Roofing Seaing profies Insuation industry If you are ooking for a soution to a specific fastening probem, just contact us. Our Saes department, in cooperation with our Research and Deveopment department, wi find a suitabe soution for you. Info

40 MFX 1301 Auminium [AMg3,5] Zinc pated pee type dome head [+0,3/-0,2] Item nr. k k m p 3,2 8,0 0,5-1, [ +/-0,15] 10,0 1,0-3, ,0 3,0-5, Ø [3,5 min] 16,0 7,0-9, ,5 [+/-0,2] 1,0 [ +/-0,1] ~1, [3,7 max] 18,0 9,0-11, ,0 10,0 1,5-5, [ +/-0,15] 12,0 4,0-6, ,0 6,0-9, Ø [4,3 min] 16,0 8,0-11, ,0 [+/-0,4] 1,2 [ +/-0,2] ~2, [4,5 max] 18,0 10,0-13, ,0 12,0-15, ,8 10,0 1,5-4, [ +/-0,15] 12,0 2,0-6, ,0 4,0-8, Ø [5,2 min] 16,0 6,0-10, [5,3 max] 18,0 8,0-12, ,0 10,0-14, ,0 12,0-16, ,0 [+/-0,4] 1,4 [ +/-0,2] ~2, ,0 16,0-19, ,0 19,0-24, ,0 24,0-29, ,0 29,0-34, Bind rivets

41 MFX 1361 Auminium [AMg2,5] Auminium [AMg5] TRIFORM dome head Item nr. k k m p 4,0 13,6 1,0-3, [+/-0,1] 18,8 1,0-7, ,0 [+/-0,29] 1,4 ~2, Ø 4,2 [4,4 max] 4,8 15,3 1,0-4, [+/-0,1] 20,5 1,0-9, ,5 4,0-12, Ø 5,0 [5,2 max] 9,6 [+/-0,29] 1,6 ~2, Bind rivets 41

42 MFX 1601 Auminium [AMg2,5] Zinc pated grooved type dome head Item nr. k k m p 3,2 10,0 Max. 6, [+0,35/-0] 14,0 Max.10, ,0 [+/-0,24] 1,4 ~1, Ø 3,4 4,0 8,0 Max. 4, [+0,35/-0] 10,0 Max. 6, ,0 Max. 8, Ø 4,3 16,0 Max.12, ,8 8,0 Max. 4, [+0,35/-0] 10,0 Max. 6, ,0 Max. 7, Ø 5,1 12,0 Max. 8, ,0 Max.10, ,0 Max.12, ,0 Max.14, ,0 Max.16, ,0 Max. 21, ,0 Max. 26, ,0 [+/-0,29] 9,5 [+/-0,29] 1,7 ~2, ,0 ~2, Bind rivets

43 MFX 1803 Auminium [AMg5] Stainess stee [A2] HAMMERDRIVE extra arge head Item nr. k k m p 4,8 9,0 4,5-7, [+/-0,08] 11,0 6,5-9, ,0 11,5-13, Ø 4,9 20,0 15,5-17, ,0 20,5-22, ,0 25,5-27, ,0 [+/-0,4] 2,6 [+/-0,3] ,0 30,5-32, ,0 35,5-37, ,0 40,5-42, ,0 45,5-47, Bind rivets 43

44 Masterfix Cosed end rivets Masterfix Cosed end rivets have been speciay deveoped to combine a strong fixing with a water- or airproof seaing. Advantages During setting, the rivet body expands to fi the hoe enabing the rivet to withstand pressures up to 35 bar (3500 kpa) After setting, the mandre head is 100% retained, providing high resistance to vibration Air- and waterproof Higher tensie and shear strengths Appications Coach work Containers HVAC appications Shipbuiding industry Cadding Note: to ensure an optimum setting, a correct size of the pre-dried hoe is important with cosed end rivets. Info

45 MFX 1201 Auminium [AMg5] Phosphated cosed end dome head Item nr. k k m p 3,2 6,5 0,5-2, [+/-0,08] 8,0 2,0-3, ,5 3,5-5, Ø 3,3 10,7 5,0-6, ,7 6,5-8, ,0 8,0 0,5-3, [+/-0,08] 9,5 3,5-4, ,0 4,5-6, Ø 4,1 12,7 6,5-8, ,0 8,0-10, ,8 8,0 1,0-3, [+/-0,08] 9,5 3,0-4, ,0 4,5-6, Ø 4,9 12,5 6,0-7, ,0 7,5-9, ,0 9,0-11, ,0 11,0-13, ,0 13,0-16, ,0 16,0-20, ,4 12,5 1,5-6, [+/-0,11] 16,0 6,0-8, ,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] 12,7 [+/-0,35] 1,4 ~1, ,7 ~2, ,0 ~2, ,5 ~3, Ø 6,5 Bind rivets 45

46 MFX 1204 Auminium [AMg5] Phosphated cosed end countersunk head Item nr. k k m p 3,2 7,5 1,5-3, [+/-0,08] 9,0 3,0-5, ,5 4,5-6, Ø 3,3 4,0 9,5 3,0-5, [+/-0,08] 11,0 4,5-6, ,5 6,0-8, Ø 4,1 4,8 9,5 2,5-4, [+/-0,08] 11,0 4,0-6, ,5 5,5-7, Ø 4,9 14,0 7,0-9, ,5 8,5-10, ,0 12,0-14, ,0 [+0/-0,4] 7,9 [+/-0,3] 9,5 [+/-0,4] - ~1, ~2, ~2, Bind rivets

47 MFX 1211 Auminium [A99,5] Auminium cosed end dome head Item nr. k k m p 3,2 8,0 0,5-3, [+/-0,08] 9,5 3,5-5, ,0 [+/-0,24] 1,4 ~1, Ø 3,3 4,0 9,5 0,5-5, [+/-0,08] 12,5 5,0-8, ,0 [+/-0,29] 1,7 ~2, Ø 4,1 4,8 9,5 1,0-4, [+/-0,08] 11,5 4,5-6, ,5 6,5-9, Ø 4,9 18,0 9,5-13, ,5 [+/-0,29] 2,0 ~2, Bind rivets 47

48 MFX 1231 Auminium [AMg5] Stainess stee [A2] cosed end dome head Item nr. k k m p 3,2 6,5 0,5-2, [+/-0,08] 8,0 2,0-3, ,5 3,5-5, Ø 3,3 11,0 5,0-6, ,7 6,5-8, ,0 8,0 0,5-3, [+/-0,08] 9,5 3,5-4, ,0 4,5-6, Ø 4,1 12,7 6,5-8, ,8 8,0 1,0-,3, [+/-0,08] 9,5 3,0-4, ,0 4,5-6, Ø 4,9 12,5 6,0-7, ,0 7,5-9, ,0 9,0-11, ,0 11,0-13, ,0 13,0-16, ,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] 1,4 ~1, ,7 ~2, ,0 ~2, Bind rivets

49 MFX 1234 Auminium [AMg5] Stainess stee [A2] cosed end countersunk head Item nr. k k m p 3,2 9,0 3,0-5, [+/-0,08] 6,0 [+0/-0,4] - ~1, Ø 3,3 4,0 9,5 3,0-5, [+/-0,08] 11,0 4,5-6, ,9 [+/-0,3] - ~2, Ø 4,1 4,8 11,0 4,0-6, [+/-0,08] 14,0 7,0-9, ,0 11,0-13, Ø 4,9 9,5 [+/-0,4] - ~2, Bind rivets 49

50 MFX 1241 Zinc pated Zinc pated cosed end dome head Item nr. k k m p 3,2 6,0 0,5-1, [+0,08/-0,10] 8,0 1,5-3, ,5 3,0-5, ,0 [+/-0,24] 1,0 [+/- 0,3] ~1, Ø 3,3 12,0 5,0-7, ,0 6,0 0,5-1, [+0,08/-0,10] 8,0 1,5-3, ,0 3,0-5, Ø 4,1 12,0 5,0-6, ,0 [+/-0,29] 1,4 [+/- 0,3] ~2, ,0 6,5-10, ,8 8,0 1,0-3, [+0,08/-0,10] 9,5 3,0-5, ,0 5,0-6, ,5 [+/-0,29] 1,7 [+/- 0,3] ~2, Ø 4,9 16,0 6,5-10, Bind rivets

51 MFX 1261 Stainess stee [A2] Stainess stee [A2] cosed end dome head Item nr. k k m p 3,2 6,0 0,5-1, [+0,08/-0,10] 8,0 1,5-3, ,5 3,0-5, Ø 3,3 12,0 5,0-7, ,0 6,0 0,5-1, [+0,08/-0,10] 8,0 1,5-3, ,5 3,0-5, Ø 4,1 12,0 5,0-6, ,0 6,5-10, ,8 8,0 1,0-3, [+0,08/-0,10] 9,5 3,0-5, ,0 5,0-6, Ø 4,9 16,0 6,5-10, ,0 10,5-14, ,0 [+/-0,24] 8,0 [+/-0,29] 9,5 [+/-0,29] 1,4 ~1, ,7 ~2, ,0 ~2, Bind rivets 51

52 MFX 1251 Copper Protection ayer cosed end dome head Item nr. k k m p 3,2 6,5 0,5-1, [+0,08/-0,10] 8,0 1,5-3, ,5 2,5-4, Ø 3,3 12,5 4,5-7, ,0 8,0 0,5-2, [+0,08/-0,10] 10,0 2,0-4, ,0 [+/-0,24] 8,0 [+/-0,29] 1,4 ~1, ,7 ~2, Ø 4,1 4,8 9,5 1,0-2, [+0,08/-0,10] 11,5 2,5-4, ,5 [+/-0,29] 2,0 ~2, Ø 4,9 52 Bind rivets

53 MFX 1281 Copper Stainess stee [A2] cosed end dome head Item nr. k k m p 3,2 6,5 0,5-1, [+0,08/-0,10] 8,0 1,0-3, ,5 2,5-4, Ø 3,3 12,5 5,5-7, ,0 8,0 0,5-3, [+0,08/-0,10] 10,0 3,0-5, ,0 [+/-0,24] 8,0 [+/-0,29] 1,4 ~1, ,7 ~2, Ø 4,1 Bind rivets 53

54 Masterfix Masterbub The Masterfix Masterbub is a newcomer in the assortment of standard high strength rivets Masterfix is offering. The stee as we as the stainess stee Masterbub rivets forms a very arge secondary fange on the back side after setting. This makes this rivet idea for high strength assemby in thin sheets. Advantages High tensie and shear strengths Permanent mandre retention, avoids ratting of rest-mandres Good hoe fiing capacity compensates oversized, sotted or misaigned hoes Provides a arge back side bearing area Good spreading of the camping oad Vibration resistant No specia tooing or nose piece is needed Appications Automotive industry Eectronics & Teecom industry Cabinets and encosures White goods HVAC industry Construction work Repair & Service industry Info

55 MFX 1611 Stainess stee Stainess stee MASTERBULB high strength dome head Item nr. k [max.] 3,2 6,6 1,0-3, [+0,09/-0,15] 9,2 3,0-5, ,8 1,4 ~2, Ø 3,3 [3,4 max] k [max.] 11,5 5,0-7, m p ,0 7,5 1,0-3, [+0,09/-0,15] 9,5 3,0-5, ,5 5,0-7, ,0 1,5 ~2, Ø 4,1 [4,3 max] 4,8 10,0 1,5-3, [+0,09/-0,15] 12,0 3,5-6, ,3 6,0-8, ,6 1,5 ~3, Ø 4,9 [5,1 max] Bind rivets 55 55

56 MFX 1621 Zinc pated Zinc pated MASTERBULB high strength dome head Item nr. k [max.] 3,2 6,6 1,0-3, [+0,09/-0,15] 9,2 3,0-5, ,8 1,4 ~2, Ø 3,3 [3,4 max] k [max.] 11,5 5,0-7, ,0 7,5 1,0-3, [+0,09/-0,15] 9,5 3,0-5, ,0 1,5 ~2, Ø 4,1 [4,3 max] 12,5 5,0-7, ,8 10,0 1,5-3, [+0,09/-0,15] 12,0 3,5-6, ,6 1,5 ~3, Ø 4,9 [5,1 max] 14,3 6,0-8, m p Bind rivets 56

57 Masterfix high strength rivets Masterfix High strength rivets are especiay designed for heavy appications, for exampe in the automotive industry and in the construction industry. In short, everywhere, where high oads are combined with a need for reiabiity. High strength rivets are known for their high tensie and shear strengths and mandre retention capacity. MASTERLOCK The Masterock has been engineered to fufi a market need for a high camp bind fastener, for thin sheet appications. Large diameter head and broad secondary fange diffuses the oad over a arge area, ensuring permanent camp. This unique fastener aso offers a tapered hoe-seeking tip, which ensures quick and easy instaation. P-LOCK The bind rivet with a mutigrip camping range and a high tensie and shear strength offers a high resistance to vibrations and a good watertight connection. After setting, the rest mandre is retained in the body permanenty, because of the specia mandre ocking system. To set this rivet no specia tooing or nose piece on the too is needed. Advantages The specia ocking mechanism increases the camping force After setting, the mandre is ocked permanenty A 100% watertight connection High resistance to vibrations Large camping capacity No specia nose piece needed Appications Automotive industry Containers Coach works Info Truck buiding Construction work

58 MFX 1761 Zinc pated Zinc pated P-LOCK high strength dome head [max.] (1) Item nr. k k m p 6,4 14,0 (23,7) 2,03-9, [+0,18/-0,05] 20,0 (33.0) 2,03-15, ,7 [+/-0,7] 2,9 ~4, Ø 6,6-7,0 This rivet requires to be set with a specia nose piece. The nose piece can be ordered at Masterfix. Nose piece 6,4: item number O900P00040 Minima setting force required 13,5 kn Check too specifications for compete information. 58 Bind rivets

59 MFX 1471 Zinc pated Zinc pated MASTERLOCK high strength dome head [+1/-0,3] Item nr. k k m p 4,8 9,0 1,5-3, [+0,11/-0,05] 11,5 3,5-6, ,0 6,0-8, Ø 4,9 [5,1 max] 16,5 8,5-11, ,8 [+/-0,3] 2,2 [+/-0,2] ~3, min max ,4 10,5 2,8-4, [+0,11/-0,05] 12,5 4,8-6, ,5 6,8-8, Ø 6,6 [6,8 max] 16,5 8,8-10, ,0 [+/-0,3] 3,0 [+/-0,2] ~4, min max ,5 10,8-12, ,5 12,8-14, Bind rivets 59

60 MFX 1561 Zinc pated Zinc coated MASTERLOCK high strength dome head max. Item nr. k k m p 6,4 12,5 2,8-4, [+0,2/-0,1] 14,5 4,8-6, ,5 6,8-8, Ø 6,65 [6,90 max] 18,5 8,8-10, ,6 max 3,3 max ~4, ,5 10,8-12, ,5 12,8-14, Bind rivets

61 MFX 1474 Zinc pated Zinc pated MASTERLOCK high strength countersunk head Item nr. k k m p 6,4 11,5 3,8-5, [+0,11/-0,05] 12,5 4,8-6, ,5 5,8-7, Ø 6,6 [6,8 max] 15,5 7,8-9, ,0 [+/-0,3] 2,0 [+/-0,2] ~4, min max ,5 9,8-11, ,5 11,8-13, Bind rivets 61

62 MFX 1511 Auminium [AMg2,5] Auminium [AMg6,0] MASTERLOCK high strength dome head [+/-0,3] Item nr. k k m p 6,4 10,5 2,8-4, [+0,11/-0,05] 12,5 4,8-6, ,5 6,8-8, Ø 6,6 [6,8 max] 16,5 8,8-10, ,0 [+0/-0,3] 3,0 [+/-0,2] ~4, ,5 10,8-12, ,5 12,8-14, Bind rivets

63 MFX 1514 Auminium [AMg2,5] Auminium [AMg6,0] MASTERLOCK high strength countersunk head Item nr. k k m p 6,4 11,5 3,8-5, [+0,11/-0,05] 13,5 5,8-7, ,5 7,8-9, Ø 6,6 [6,8 max] 17,5 9,8-11, ,0 [+0/-0,3] 2,0 [+/-0,2] ~4, ,5 11,8-13, ,5 13,8-15, Bind rivets 63

64 Hand toos

65 Masterfix Hand toos for bind rivets Distinguish themseves by Wide choice High professiona quaity Competitive price eves Continuous product deveopment and innovations Compete suppy of toos with fu set of nose pieces Wide seection of service packs (too-sets) The tabe beow shows which hand too we recommend for particuar rivet sizes and materias. In case of questions we wi of course be peased to give you further advice. Recommended capacity Ø 2.4 Ø Ø 4.0 Ø Ø Ø 8.0 Additiona option Auminium Stain. stee Auminium Stain. stee Auminium Stain. stee Auminium Stain. stee Auminium Stain. stee P-Lock stee Stain. stee MFX 150 MFX MFX 80 MFX 260 MFX 280 Info

66 Hand toos for bind rivets MFX 150A item nr A Professiona bind riveting too for sma and ight assemby work. Capacity Weight Length Body materia Lever materia Equipment Aso avaiabe ø2,4-5,0 mm 0,6 kg 250 mm Auminium Nose pieces ø mm As set with assorted PLIA rivets item nr AS MFX 150B item nr B Professiona bind riveting too for sma and ight assemby work. Equipped with an opening spring. Capacity ø2,4-5,0 mm Weight Length Body materia Lever materia Equipment Aso avaiabe 0,6 kg 250 mm Auminium Nose pieces ø mm As set with assorted PLIA rivets item nr BS 66 Hand toos for bind rivets

67 Hand toos for bind rivets MFX item nr Practica bind riveting too for sma & ight assemby work. The front seeve can be positioned horizontay as we as verticay. Capacity ø2,4-5,0 mm Weight Length Body materia Lever materia Equipment 0,85 kg 300 mm Auminium Nose pieces ø mm MFX 80 item nr Improved Lazy Tong bind riveting too for "one" handed setting. With reinforced inks and capacity increase to 6,4 mm rivets in stee. This too requires ony minima physica effort. Capacity ø3,0-6,4 mm Weight Length Body materia Lever materia Equipment 2,4 kg 310 mm (foded) Auminium Nose pieces ø mm Hand toos for bind rivets 67

68 Hand toos for bind rivets MFX 260 item nr Heavy duty ong arm riveter with adjustabe front seeve, aowing the breaking point to be set in the most idea position. Capacity ø3,0-6,4 mm Weight Length Body materia Lever materia Equipment 1,9 kg 520 mm ABS (pastic) with stee parts Nose pieces ø mm MFX 280 item nr Heavy duty ong arm riviter with adjustabe evers for easier setting of arge rivets. The adjustibe front seeve, aows the breaking point to be set in the most idea position. ø4,0-8,0 mm Capacity ø4,8-6,5 mm P-LOCK, Magna Lok & Monobot Weight 2,6 kg Length Body materia Lever materia Equipment 660 mm max. ABS (pastic) with stee parts - Nose pieces ø 4,0-6,4 mm - Monobot ø 4,8-6,4 mm - Magna-Lok ø 4,8-6,5 mm 68 Hand toos for bind rivets

69 Power toos

70 Masterfix EZM and XGRIP Power toos for bind rivets XGRIP R50H The hydrauic/pneumatic XGRIP too is mouded in ABS (a gass fibre reinforced synthetic materia) giving it high impact resistance with minimum weight. This XGRIP toos is equipped with a pressure reief vave which is operated as soon as the pressure exceeds 7.5 Bar. This too has an oi eve indicator to show you when oi needs to be added. EZM 1000 / EZM 2000 The new generation EZMaster hydrauic/pneumatic toos combine strength and reiabiity with a seek, attractive and ergonomicay sound design and are very we suited for continuous use. The hydrauic 'house' is made of ABS and the pneumatic 'house' is made of a revoutionary new synthetic materia with the strength and rigidity of cast metas or aoys. The too is equipped with a pressure reief vave and the high-tech seaing makes this too 'oi service free'. The toos are equipped with an easy to use vacuum retraction system which is activated by simpy turning the mandre coection cup. Position 1 (1st cick) = mandre coector is ocked onto the too - no retraction yet. Position 2 (2nd cick) = vacuum retraction is activated. The coection cup is equipped with a siicon bottom providing an escape for excess air as we as a wecome sound reduction when the rest mandre is reeased into the cup. A Masterfix Power toos meet the current CE-standard. The tabe beow shows which XGRIP too we recommend for a particuar rivet size and materia. Ø 2.4 Ø Ø 4.0 Ø Ø Recommended capacity Auminium Stain. stee Auminium Stain. stee Auminium Stain. stee Auminium Stain. stee Auminium Stain. stee XGRIP R50H EZM 1000 EZM 2000 Info

71 Power toos for bind rivets X-GRIP R50H item nr R50HD Light weight hydrauic/pneumatic bind riveting too without extraction, with mandre coector and suspension bracket. Capacity ø2,4-5,0 mm Weight Dimensions Stroke Pressure required Traction power(6 bar) Equipment 1,3 kg 253 x 284 mm 14,0 mm 5-7 Bar 8 kn Nose pieces ø 2,4-5,0 mm EZM 1000 item nr. 451EZM1000 New hydrauic/pneumatic bind riveting too with extraction, mandre coector and suspension bracket. Capacity ø3,0-5,0 mm Weight Dimensions Stroke Pressure required Traction power(6 bar) Equipment 1,25 kg 264 x 272 x 102 mm 17,0 mm 5-7 Bar 7,3 kn (6 bar) Nose pieces ø 3,0-5,0 mm Power toos for bind rivets 71

72 Power toos for bind rivets EZM 2000 item nr. 451EZM2000 New hydrauic/pneumatic bind riveting too with extraction, mandre coector and suspension bracket. Capacity ø4,0-6,4 mm Weight Dimensions Stroke Pressure required Traction power(6 bar) Equipment 1,65 kg 275 x 272 x 125 mm 21,0 mm 5-7 Bar 12,5 kn (6 bar) Nose pieces ø 4,0-6,4 mm 72 Power toos for bind rivets

73 Technica info

74 Bind rivet breaking point The rivet is made of two parts namey, the body and the mandre. The body is deformed when the rivet is set and it is this part which camps the materias together. The function of the mandre is to deform the body of the rivet. The mandre is therefore aways stronger than the body. The mandre breaks off at its specific breaking point. The breaking point ensures that the mandre breaks off at the right moment so that the body is correcty deformed. The breaking oad can be adjusted so that the mandre breaks at a sooner or a ater point of time. Mandre Breaking point Body Tensie and shear strength The tensie strength is the maximum force the rivet, rivet nut or rivet bot can bear engthways (see arrows) before it gives out. The tensie strength is obtained through tests and is aways the smaest average vaue. The shear strength is the maximum force the rivet, rivet nut or rivet bot can bear vertica to its ength (see arrows) before it gives out. The shear strength is obtained through tests and is aways the smaest average vaue. By changing the breaking point, the shear strength wi be increased or decreased. Both tensie and shear strength are expressed in Newton (1 kg = 10 N). Shear strength Tensie strength Technica detais

75 Dimensioning rivets Standard rivet (a sizes in mm) Ø Ø Ø = Rivet body diameter k = Head diameter m = Mandre diameter k = Head height = Rivet body ength p = Mandre ength Ø Ø Ø Dimensioning rivet nuts Ø Standard rivet nut (a sizes in mm) = Rivet nut body diameter k = Head diameter k = Head height = Rivet nut body ength sw = Key size Ø Ø Technica detais

76 Dimensioning rivet bots Ø Standard rivet bot (a sizes in mm) = Rivet nut body diameter k = Head diameter k = Head height = Rivet nut body ength Ø Technica detais

77 Auminium AL 99,5 Low weight Easy to deform Highy eectrica and warmth conductive Auminium aoys AMg Soid and strong - easy to poish If the degree of Mg increases, the strength of the rivet increases and the deformabiity decreases Suitabe for heavy constructions Easy to deform Easy to coat (e.g. with anti-corrosion coating) Stainess stee Highy resistant to corrosion Suitabe for heavy constructions A4 has a higher resistance to acids than A2 Copper Highy eectrica and warmth conductive Easy to deform Suitabe for sodering Materia features

78 Contact corrosion When different metas come in contact with each other, contact corrosion wi arise. The tabe beow shows how the different materias combine. Materia Materia to be connected rivet body Auminium Copper Stain.stee Auminium Copper Stain. stee i MoneI" very good I + good I - moderate I -- bad Coatings Corrosion can never be reduced to 0%. However, coatings can hep to reduce the chance of corrosion or deay corrosion: Painting 2-Components painting is possibe in many coors. A RAL-coours can be deivered on request. Zinc pating This is a coating obtained through eectroysis and consists of a Zinc-iron aoy. This coating is characterized by a high resistance to wear and tear. Materia features

79

80 Edition Apri 2012