Jobrechner ECU-MIDI 1.0 & ECU-MAXI 1.0

Transcription

1 Spare parts

2 ECU-MIDI 1.0 & ECU-MAXI 1.0 Jobrechner ECU-MIDI 1.0 & ECU-MAXI 1.0 Purpose Containing all the intelligence of the system ECU-MIDI 1.0 Previously known as JR-Fujitsu ECU-MAXI 1.0 Previously known as JR (JC-F1 Sprayer & DC) (JC-F2 Hydraulics & TC)

3 ECU-MIDI 1.0 & ECU-MAXI 1.0 ECU-MIDI 1.0 System overview with 2 ECU-MIDI 1.0 ISOBUS cable (for JR-F) Connecting cable Junction box for F ECU F Junction box for F ECU F

4 ECU-MIDI 1.0 & ECU-MAXI 1.0 Jobrechner ECU-MAXI 1.0 System overview with 3 Junction boxes ECU Junction box C Sections Junction box B Hydraulics Junction box A Regulation & sensors Straight ISOBUS cable (for JR2)

5 VIRTUAL TERMINALS BASIC Terminal (with camera & GSM) Display size: 5.7

6 VIRTUAL TERMINALS COMFORT Terminal Under creation (with camera & GSM) Display size: 10.4

7 VIRTUAL TERMINALS TOUCH-ME (Tactile) Display size: 12

8 CABLING System overview Example of architecture (based on ECU-MAXI 1.0) Virtual Terminal to be defined (Comfort with camera) - to be defined (Touch-ME) Multi-Function Grip (CPC connector) Base equipment ISOBUS cable ECU-MAXI

9 CABLING Cabling ISOBUS Base equipment Purpose ISOBUS certified connector bringing both the power supply and the CAN bus to the system. Connects the VT to the ISOBUS CAN bus. Required in non-isobus tractors (Sub-D cable length: 2,2m) (Sub-D cable length: 6,0m) Power supply cable length: 6,20m

10 CABLING Cabling ISOBUS cable For ECU-MIDI 1.0 For ECU-MAXI 1.0 Different cable lengths are available. Please contact Müller-Elektronik for further information.

11 CABLING Cabling ISOBUS cable With additional CAN output Purpose Connecting additional devices such as TANK-Control II For ECU-MAXI 1.0 architectures Replaces straight ISOBUS cable Different cable lengths are available. Please contact Müller-Elektronik for further information.

12 CABLING Cabling ISOBUS connecting cable Purpose Linking 2 ECU-MIDI 1.0 Different cable lengths are available. Please contact Müller-Elektronik for further information (0,30m) (1,50m) (6,50m)

13 CABLING Cabling Junction box Different cable lengths and pinnings are available. Please contact Müller-Elektronik for further information. Junction box A Regulation & sensors Junction box B Hydraulics Junction box C Sections Junction box for F Junction box for F

14 OPTIONS DGPS receiver Hemisphere A100 EGNOS technology Accuracy: +/- 15/30 cm Hemisphere A320 GSM RTK technology Accuracy: +/- 2/3 cm Partlist DGPS receiver Magnetic footing Metal plate Connector cable Adhesive plate (A100) (A320) (cable 6m / n 4)

15 OPTIONS Peripherals Multi-Function grip CAN communication 3x8 positions LED indicator S-BOX 9 sections CAN communication 9 switches for sections 1 switch for spraying ON/OFF (CPC connector) (Sub-D connector) (CPC connector) (Sub-D connector) Note: CPC for in-cab connectors (ISO tractors)

16 OPTIONS TANK-Control Purpose Measuring tank volumes Advantages Allows all types of liquids Allows irregular shapes of tank Automatic stop of the filling sequence (1) Wide range of water columns supported Display of the tank volume in the Sprayer interface (1) Requires access to the filling pump command

17 OPTIONS TANK-Control Partlist Floating gauge (6m long cable) Mounting kit TANK-Control (Max measuring height: 1440mm) (Max measuring height: 1840mm) (Max measuring height: 2400mm) Different heights are available. Please contact Müller-Elektronik for further information. Cable to connect to Junction boxes (4m) (8m) Different lengths are available. Please contact Müller-Elektronik for further information.

18 OPTIONS TRAIL-Control Containing of the kit: Angle sensor (x1) Gyroscope (x1) Cable Mounting kit Gyroscope Gyroscope bracket Angle sensor

19 OPTIONS DISTANCE-Control Containing of the kit: Ultra-sound sensor (x2) 20m long cable for U-S sensor (x2) ELOBAU sensor Tilt sensor Mounting kit Ultra-Sound sensor Tilt sensor U-S sensor bracket

20 OPTIONS DISTANCE-Control II System overview: Non appearing on this drawing: DISTANCE-Control 2 Junction box ISOBUS cable (with additional CAN outputs) Y-cable End resistance - Provided with ISOBUS connector ECU-MAXI Ultrasonic sensors (x3) Part of the sensor kit Angle sensors (x2) Part of the sensor kit DISTANCE-Control 2 ECU

21 OPTIONS Spare parts Tilt sensor Pressure sensor WIKA 0-16 bar 1m cable AMP connector (Mounting kit) Cable extension 8m To connect into Junction boxes Different lengths are available Please contact Müller-Elektronik for further information.

22 OPTIONS Spare parts Speed sensor Technology: Hall effect 1m long cable No magnet contained in this ref Flowmeter Bürkert 10 bar 7m cable, no connector l/min (NW20) l/min (NW25) (NW20) (NW25) Magnet With screws Qty: Flowmeter Polmac 1, Turbo-Flow 30 bar 7m cable, no connector l/min

23 SPRAYDOS SPRAYDOS - Architecture SPRAYDOS ECU (Short version) (Long version) Mounting profile Wing screw Bracket Provided with the SPRAYDOS ECU Base equipment Power cable Provided with the Base equipment Machine signal Junction box X sensor (wheel) Provided with Base equipment X sensor (shaft / wheel) Provided with Base equipment Tractor signal plug Provided with Base equipment Hydraulic signal Junction box

24 SPRAYDOS Junction boxes Machine signal derivation box Cable length: 6,50m Used to connect: Sensors Sprayer controls Hydraulic derivation box Cable length: 6,50m Used to connect: Hydraulic controls

25 BASE EQUIPMENT Base equipment - Variants For trailed sprayers Speed signal sensor: X sensor without connector (Cable length: 10m) Delivered with 12 magnets For DIN / ISO11786 tractors Speed signal taken from the tractor

26 BASE EQUIPMENT Base equipment - Variants For tractors with no signal connector Speed signal sensor: X sensor with connector (Cable length: 6m) Delivered with 5+2 round magnets with magnets without magnet

27 FLOW MEASUREMENT Flowmeters Flowmeter Bürkert NW20 10 bar 7m cable, no connector l/min Flowmeter Polmac 1, Turbo-Flow 30 bar 7m cable, no connector l/min Flowmeter Bürkert NW25 10 bar 7m cable, no connector l/min

28 OPTIONS / SPARE PARTS Options Pressure sensor with AMP plug 0-16 bar 1m cable AMP connector Pressure sensor without AMP plug 0-50 bar 9m cable no connector Extension cable For sensors with 3pin AMP connectors 8m long For junction boxes Different lengths are available Please contact Müller-Elektronik for further information. Pressure sensor equipment pack Contains: Adapter 1/8 NPT Adapter 1/4 AG-NYB QJ Sealing cap, rubber

29 OPTIONS / SPARE PARTS Spare parts Speed sensor X No connector 6m long cable Sold with 12 magnets Speed sensor X With connector 6m long cable Sold with 5+2 magnets Base equipment without speed sensor Bracket support Speed cable No sensor X Power supply cable For DIN / ISO11786 tractors With 3pin plug Magnet (for wheels) With screws Qty:

30 OPTIONS / SPARE PARTS Ultrasonic sensor Inductive Speed sensor with connector 1m long cable Tilt modul

31 OPTIONS / SPARE PARTS Test box for After-Sale Technicians

32 OPTIONS / SPARE PARTS Box service / AMP connector for After-Sale Technicians

33 OPTIONS / SPARE PARTS Databox II / update ECU -Midi

34 SPARE PARTS Parkbox for connectors 30/39 pin

35 SPARE PARTS Fuse holders and fuses 10 / 50 A

36