STATIONARY UNIT VERSION 1.1

Transcription

1 STATIONARY UNIT VERSION 1.1

2 Globalstar Data Kit Welcome. Your Globalstar Data Kit is your wireless link to the Internet. Please review the following before beginning the installation of your new modem. A. WHATS IN THE KIT? GSP-2900 data cable with RS232 interface residing in the Network Interconnect Device box. CD Containing software applications and a detailed QUALCOMM Globalstar Packet Data Users Guide (see section E) B. WHAT ELSE DO YOU NEED? Globalstar GSP-2900 Stationary unit Operating systems :Windows 95, 98, NT or 2000; Macintosh; Red Hat Linux; Solaris UNIX Grounding equipment is required not included. C. GETTING STARTED Windows 95, 98, NT, 2000 Before you begin, make sure the following are installed on your computer: TCP/IP protocol and Dial-Up Networking for 95/98 or Remote Access Services (RAS) for NT/2000. (For help, see your Windows documentation.) See appropriate section below for a detailed explanation of the set-up process for each of the Windows platforms. UNIX Follow the instructions in the Users Guide (or see section D). Index Page Windows 95, 98, 98SE 2 Windows 2000 & ME 9 Windows NT 4 16 Version 1.1 3/2001 1

3 WINDOWS 95, 98 INSTALLATION Please note that some of the windows in Windows 95 and Windows 98 first edition will be different then the ones shown in the screens shown below. Place the CD into your CD Rom Drive. The CD will bring up the following window, if it does not, double click on My Computer on your desktop and then on the CD ROM icon which will produce the following window; Click on the Install Packet Modem Drivers Click on the Next Version 1.1 3/2001 2

4 After reading and agreeing with the License Agreement, Click the Yes button Click the Begin Modem Install Click on the Add button Version 1.1 3/2001 3

5 Select the Other button and click Next Ensure there is a check in the box beside the Don t run the Hardware Installation Wizard Ensure that there is a check in the box beside Don t detect my modem, I will select it from a list Version 1.1 3/2001 4

6 Click the Have Disk Click the Browse button Click the CD ROM drive in the Drives window located at the bottom of the screen Highlight the gstardata.inf file Click OK Version 1.1 3/2001 5

7 Click the OK button Highlight the QUALCOMM Globalstar Phone Modem for Stationary Unit Click the Next button Highlight Com port (COM1) or whatever your selected com port is Click Next Version 1.1 3/2001 6

8 Click on Finish Click on Close Click on the Finish Version 1.1 3/2001 7

9 This screen will appear Click on the OK button and your machine will reboot Your Modem has now been successfully installed. Version 1.1 3/2001 8

10 WINDOWS 2000 and ME INSTALLATION Please note that some of the Windows in 2000 will be different then the ones shown in the screens shown below. Place the CD into your CD Rom Drive. The CD will bring up the following window, If it does not, Double Click on My Computer on your desktop and than on the CD ROM icon which will produce the following window: Click the Install Packet Modem Driver Click on the Next button Version 1.1 3/2001 9

11 Once you have read and agree with the License agreement, click on the Yes button Once you have read this screen, Click on the Begin Modem Install Click the Add button Version 1.1 3/

12 Select the Other button Click on Next button Ensure there is a check in the box beside Don t run the Hardware Installation Wizard Click on Next button Ensure there is a check in the box beside Don t detect my modem, I will select from a list Click the Next button Version 1.1 3/

13 Click on Have Disk button Click on Browse.. button Click on the CD ROM drive in the Drives window located at the bottom of the screen Highlight the gstardata.inf Click the OK button Version 1.1 3/

14 Click the OK button Highlight QUALCOMM Globalstar Phone Modem for Stationary Unit Click the Next button Click on your COM1 communications port or whatever port you have connected your phone to Click the Next button Version 1.1 3/

15 Click the Finish button Click the Close button Click the Finish button Version 1.1 3/

16 Click the OK button and your machine will reboot Your Modem has now been successfully installed. Version 1.1 3/

17 WINDOWS NT 4 INSTALLATION Ensure that RAS services and TCP/IP services are installed before you start your installation. Place the CD into your CD ROM Drive. The CD will bring up the following window. If it does not, Double Click on My Computer on your desktop and than on the CD ROM icon which will produce the following window: Click the Install Packet Modem Drivers Click the Next button Version 1.1 3/

18 Once you have read and agree with the License agreement, Click the Yes button Once you have read this screen, Click the Begin Modem Install Click the Add button Version 1.1 3/

19 Ensure there is a check in the box for Don t detect my modem: I will select it from a list Click the Next button Click the Have Disk. button Click the Browse.. button Version 1.1 3/

20 Highlight the Gstarpacket1_0 Click the Open button Click the OK button Highlight QUALCOMM Globalstar Phone Modem for Staionary Unit Click the Next button Version 1.1 3/

21 Select the Selected ports button Highlight COM1 or whatever port you have the Qualcomm Globalstar phone connected to Click the Next button Click the Finish button Click the Close button Version 1.1 3/

22 Click the Yes button Click the Add button Click the OK button Click the Continue button Your Modem has now been successfully installed. Version 1.1 3/