accessories and TechnoloGy Behnke electronics sip view inside a Behnke sip intercom Technology

Transcription

1 accessories and TechnoloGy Behnke electronics sip view inside a Behnke sip intercom Module housing Fixing the modules in the front frame and holder for electronics housing configuration buttons Earth/Frame (GND) 2 Electronic housing Printed board protected in the enclosed housing 5 connection either via screw terminal or RJ45 connector 6 Second PoE fed switch port for connection of other network devices 7 Control contacts (two relays) 8 Alarm input 9 Cable entry

2 accessories and TechnoloGy Behnke electronics sip General features mechanical features IP electronics, can be connected directly to a 10/100MBit ethernet port with power over ethernet to IEEE802.3af (15.6W) No additional power supply required Remote maintenance via the web interface Up to two control contacts (relays) with two activation codes per relay; fully configurable Full duplex mode Voice-controlled duplex (two-way) communication possible with built-in amplifier (industrial phone only) Adjustable call duration (1 to 20 minutes) Dialling a stored phone number at the press of a button: Up to 8 buttons plus the i button of the keypad are supported Accept call at the press of a button or automatically after the first ring Group call or redial: e.g. successive dialling of several phone numbers at the press of a button together with the "uncancellable call" function (ending the connection by pressing a button not allowed) Volume of the loudspeaker and microphone sensitivity are adjustable Modular printed circuit board: Basic electronics with adapter board and main circuit board, electronic extension modules can be simply plugged in Autoprovisioning (automatic configuration based on the MAC address) Secondary SIP server Freely configurable voice announcements, record on the phone or upload via the web interface High-quality workmanship, metal housing Two-compartment housing (metal housing!): Electronics in the closed, moisture resistant housing; loudspeaker, buttons and microphone are moisture-insensitive (loudspeaker with plastic diaphragm, etc.) High-quality stainless steel buttons; IP 65 Horizontal installation also possible Retrofit variants available Improved acoustics (greater syllable articulation) All components are pluggable Illuminated buttons also available 16 button keypad (keys 0 to 9, n, # and additional buttons) Loudspeaker with anti-vandalism protection Fly screen made of metal for loudspeaker and microphone; Protection against vandalism Passive ventilation system (air circulation in the housing and in the individual modules) Tamper-proof screws (optional) Foamed-in-place rubber seals Housing, stainless steel columns, protection against rain, cover panel, etc. Camera and display modules Supplementary modules (e.g. for card reader)

3 accessories and TechnoloGy Behnke electronics sip Telephone functions in detail 1. Telephone functions 2. control functions Accept incoming calls Manual call acceptance at the press of a button Automatic call acceptance Creating a stored phone number at the press of a button 8 buttons plus button of the keypad Phone number length: > 40 digits Special symbol for pause, wait for dialling tone, * and # "(Sequential) group call" option: successive dialling of several phone numbers at the press of a button until acknowledged by any DTMF tone or connection with an emergency call control station or all numbers are dialled; if the "group call" option is activated, ending a connection by pressing a button is not allowed ("uncancellable call") Dialling an individual phone number using the keypad Keypad activated by pressing the button of the keypad Dialling a speed dialling destination 100 speed dialling destinations Selection of the speed dialling destination via the keypad and by entering a two-digit code (00 to 99) button of the Connection options "Call duration" option: Call duration limited to 1 to 20 minutes "Volume" option: Setting the volume of the loudspeaker "Voice controlled two-way (half-duplex) communication" option: If a particularly high volume is required, voice-controlled two-way (half-duplex) communication can be activated for acoustic echo suppression (echo cancelling) (industrial phones only) Manual triggering of the relay By entering an activation code during a connection or pressing the button of the keypad (entry ended with #) Length of the activation code: one to four digits One activation code per relay Relay activation period: 1 to 90 sec. Activation of the relay: can be set via phone, keypad or both "Hang up after activation" option: after the activation period has expired the connection is ended automatically Automatic triggering of the relay During incoming, outgoing or incoming and outgoing connections At the beginning of incoming, outgoing or incoming and outgoing connections Activation period of the relay at the start of the connection: 1 to 90 sec. Input Call triggered via alarm input Voice announcements Up to 9 voice announcements possible, each with up to 40 seconds duration Recording via the phone Management using the web frontend Greeting or information announcements can be configured depending on the status of the intercom 2

4 accessories and TechnoloGy Behnke electronics sip 3. configuration and dialog functions Configuration Configuration via web interface (HTTPS protected) Management of the voice announcements via telephone by means of voice menu Manage the IP address settings using configuration buttons and the voice menu at the device Adjustable keypad mode Configurable assignment of the voice announcements Configurable info texts of the display Phone book management Adjustable relay mode Adjustable input mode Configuration screen of the IP intercom i User instructions Technical manuals and operating instructions for Behnke products are available under:

5 accessories and TechnoloGy Technical data sip phones series 10 sip phones series 20, 30, 50 Series 10 IP Compact device with integrated loudspeaker and microphone 1 or 2 call buttons with illuminated nameplates 1 freely configurable relay DHCP Client Dynamic Host Configuration Protocol (RFC 2131). Consumption 5 W Series 20 IP, 30 IP, 50 IP Modular structure Up to 8 direct call buttons with freely configurable phone numbers 2 freely configurable relays Optional security relay available for separate installation Keypad module available, functions: Direct phone number dialling Code lock Short dial with up to 100 destinations Display module available, functions: Illuminated 4 lines each with 20 characters Info texts configurable depending on device status 199 phone book entries, more on request Multi-button with up to 100 call buttons on request DHCP Client Dynamic Host Configuration Protocol (RFC 2131). Consumption 5 W

6 accessories and TechnoloGy Technical data sip phones series 40 sip phones spl series Series 40 IP Up to 8 direct call buttons with freely configurable phone numbers Two freely configurable relays Optional security relay available for separate installation Industrial telephones Modular structure Up to 2 direct call buttons Two freely configurable relays Keypad module (expected availability from end of 2014) : Direct phone number dialling Code lock Short dial with up to 100 destinations Voice-controlled two-way (half-duplex) communication possible Additional amplifier for volumes up to 105 db(a) in the call DHCP Client Dynamic Host Configuration Protocol (RFC 2131) Consumption 5 W DHCP Client Dynamic Host Configuration Protocol (RFC 2131) Consumption 12 W