Board to Board Connectors
|
|
- Rosalind Reeves
- 8 years ago
- Views:
Transcription
1 oard to oard onnectors Table of Models Single Row.00/(.7mm) Pitch oard to oard onnectors Molded and Peel--Way Insulators Triple Row Description: Peel--Way (KS, KNS, KTS) Index: -69 to 400 (-4 F to 7 F) Features: and female connectors are designed in mating pairs..00/(.7mm) row to row pitch. High reliability screw-machined terminals with closed-end construction for 00% antiwicking of solder. For surface mount options, consult factory. Reliable mechanical support. ustom configurations available. KS FSDS K * RDD and KD have.00/(.4mm) pitch between rows. Note: FSDS replaces SDS, HSDS, and RSDS. RDDS replaces DDS and HDDS. RDD replaces DD. How To Order KNS RDDS (RDD*) KN (KD*) KTS KT Description: FR-4 (FSDS) Mat l: FR-4 Fiberglass Epoxy oard Index: -40 to 40 (-40 F to 84 F) Description: Molded (RDDS, RDD) Mat l: High Temp. Liquid rystal Polymer (LP) Index: -40 to 60 (-40 F to 00 F) Description: Peel--Way (K, KN, KD, KT) Index: -69 to 400 (-4 F to 7 F) ody Type RoHS ompliant Insulators: KS - Single Row Peel--Way FSDS** - Single Row FR-4 KNS - Peel--Way RDDS - Molded RDD*- Molded KTS - Triple Row Peel--Way *.00/(.4) pitch between rows **FSDS is available with Gold plating only (GG) KTS M G (no. of pins per row x no. of rows) Std. pins per row = 0, 0, 0, 40 & 0 RoHS ompliant: ontact Plating RoHS ompliant: ody Type RoHS ompliant Insulators: K - Single Row Peel--Way KN - Peel--Way KD*- Peel--Way KT - Triple Row Peel--Way *.00/(.4) pitch between rows KT M RoHS ompliant: (no. of pins per row x no. of rows) Std. pins per row = 0, 0, 0, 40 & 0 Energy Way, West Warwick, RI 089 US Tel: Fax: atalog 6 Note: Terminals plated with Matte Tin are available only with Gold plated contacts. Quick-Turn delivery is not available on products with Matte Tin plating. 46
2 -DDELIVER.00/(.7mm) Pitch oard to oard onnectors Molded and Peel--Way Insulators dditional standard and custom terminals available. See Terminals section or consult factory. Type -68 Type -47 Type -0 Type -7 Molded or FR-4 only Molded or FR-4 only Molded or FR-4 only Peel--Way only (Not Quick-Turn) (Not Quick-Turn) Standard Quick-Turn Terminals - QUIK-TURN oard to oard onnectors.04 Dia. (.04).04 Dia. (.07).04 Dia. (.07).04 Dia. (.07).6 (4.9).080 (.0).080 (.0).0 (.67).0.0 Dia. (.8).78 (7.06).070 (.78).04 Dia. (.86).0 (.8). Standard Terminals - Surface Mount Type - Type -6 Peel--Way only Peel--Way only.9 (.8).0 Peel--Way Removable arriers Polyimide Film Peel away after soldering to P.. Dia. (.0).0. Dia. (.0).00 (.7) Standard Quick-Turn Terminals - Thru-Hole Type - Type - Peel--Way only Peel--Way only.07 Dia..0.. Single Row.07 Dia..08 (.6)...00" (.7mm) Spacing Row to Row Type - Peel--Way only (Not Quick-Turn).07 Dia..070 (.78).. Triple Row Solder fillets visible both sides for inspection and cleaning.. Place socket on P board.. Send P board and socket through soldering operation.. Peel away polyimide film carrier for complete solder joint visibility or leave in place for added stability. vailable Online: RoHS Qualification Test Report P See following pages for typical board to board spacing configuration and additional dimensional information. (.7).00 Typ. (.4) (.7) (.7) (.7).00 Typ. (.4) (.7) (.7) Total # of Pins per onnector Single Dual Triple Molded or FR-4 Peel--Way # of Pins Per Row (.97).00 (6.67).0 (9.7).00 (.07).0 (64.77).40 (.4).90 (4.).40 (6.8).90 (49.).40 (6.) Total # of Pins per onnector Single Dual Triple # of Pins Per Row.60 (6.).0 (9.).60 (4.9).0 (4.6).60 (67.) Multiply number of rows by number of pins per row for total pin count in part number (.4).90 (4.).40 (6.8).90 (49.).40 (6.) 47 Energy Way, West Warwick, RI 089 US Tel: Fax: atalog 6
3 oard to oard onnectors Thru-Hole & Figure Peel--Way & Peel--Way.00/(.7mm) Pitch oard to oard onnectors Figure & Peel--Way Surface Mount & Thru-Hole Figure & Peel--Way Part # Part #.0/(.8).046/(.7) K00-G KS00-7MG.070/(.78).08/(.6).070/(.78).070/(.78).00/(.76).08/(.6).08/(.6).070/(.78).070/(.78).08/(.6).08/(.6).070/(.78).08/(.6).0/(.8).0/(.8)./(.84).8/(.00)./(.84).8/(.00).6/(4.09).6/(4.9)./(.84).8/(.00).6/(4.09).6/(4.9).6/(4.9).6/(4.09).78/(7.06).78/(7.06).78/(7.06).08/(.6).00/(.4).4/(.6).49/.8/(4.6).88/(4.78).9/(4.88).96/(4.98).97/(.00).0/(.6)./(.87)./(.97).0/(6.).46/(6.).09/(7.8).48/(8.84).6/(9.) Order one each & to get the required dim. K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G K00-G 0 position single row part numbers shown. See How To Order section for ordering information. If required dimension is not shown, consult factory. KS00-7MG KS00-7MG FSDS00-7GG FSDS00-GG FSDS00-7GG FSDS00-GG FSDS00-GG FSDS00-68GG FSDS00-7GG FSDS00-GG FSDS00-GG FSDS00-68GG FSDS00-68GG FSDS00-GG FSDS00-0GG FSDS00-0GG FSDS00-0GG Fig. Energy Way, West Warwick, RI 089 US Tel: Fax: atalog 6 48
4 .00/(.7mm) Pitch oard to oard onnectors Thru-Hole & Surface Mount Figure 4 Peel--Way & Figure & Peel--Way Surface Mount & Figure 6 & Peel--Way oard to oard onnectors Part # Part #.0/(.8).046/(.7) K00-G KS00-7MG.00/(.7).00/(.7).00/(.7).00/(.7).00/(.7).0/(.8).8/(.00).6/(4.09).6/(4.9).6/(4.09).6/(4.9).78/(7.06).06/(.6).68/(4.7).9/(4.88).96/(4.98)./(.6)./(.46).09/(7.8) Order one each & to get the required dim. K00-6G K00-6G K00-G K00-G K00-6G K00-6G K00-G KS00-7MG FSDS00-GG FSDS00-GG FSDS00-68GG FSDS00-GG FSDS00-68GG FSDS00-0GG.78/(7.06).6/(8.) K00-6G FSDS00-0GG 0 position single row part numbers shown. See How To Order section for ordering information. If required dimension is not shown, consult factory. Fig Energy Way, West Warwick, RI 089 US Tel: Fax: atalog 6
5 oard to oard onnectors Staggered.00/(.7mm) Pitch oard to oard onnectors Peel--Way Insulators Table of Models Triple Row Description: Peel--Way (KMS, KMD, KMT) Index: -69 to 400 (-4 F to 7 F).00 Typ. (.) KES HKS Description: Peel--Way (KM, KM, KM) Index: -69 to 400 (-4 F to 7 F).00 Typ. (.) KE HK Features: Supplied in high temperature Peel- -Way removable terminal carrier. (ex. KES0-) Triple Row (ex. HKS00-) and male connectors are designed in mating pairs..00/(.7mm) row to row pitch. High reliability screw-machined terminals with closed-end construction for 00% anti-wicking of solder. ustom configurations available. Specifications: Terminals: rass - opper lloy (6000) STM--6 ontacts: eryllium opper (700) STM--94 (.7) # of Pins Total (0.6).00 (.08) (.4) (0.6).900 (.86).700 (7.78) 9.00 (7.94).900 (.86) (.6).40 (0.48) How To Order (.7) KES 0-8 M G (.7) (.7) # of Pins Total 8 (0.6).00 (.08) (.4) (0.6) (0.).600 (.4) (.40).800 (0.).00 (.0).00 (7.94) Plating: over Nickel over Nickel over Nickel Gold per STM--488 Matte Tin per STM4-97 Tin/Lead per MIL-P-878 Nickel per QQ-N-90 ody Type RoHS ompliant Insulators: KES - HKS - Triple Row - Positions 8 - Positions Triple Row (See Tables above for standard pin counts) ontact Plating RoHS ompliant: RoHS ompliant: KE 0 - M ody Type RoHS ompliant Insulators: KE - HK - Triple Row - Positions 8 - Positions Triple Row RoHS ompliant: Energy Way, West Warwick, RI 089 US Tel: Fax: atalog 6 Note: Terminals plated with Matte Tin are available only with Gold plated contacts. Quick-Turn delivery is not available on products with Matte Tin plating or Triple Row body types. 0
6 Staggered.00/(.7mm) Pitch oard to oard onnectors Peel--Way Insulators dditional standard and custom terminals available. See Terminals section or consult factory. Type -8 Type -0 Type -46 Type -0 (mates with -6 only) (not Quick-Turn) Standard Quick-Turn Terminals.08 Dia. (.47) Dia. (.47).0 (.8)..08 Dia. (.47).04 (.09). QUIK-TURN DDELIVER oard to oard onnectors P.08 Dia. (.97).04 Dia. (.86).04 Dia. (.86) P Standard Quick-Turn Terminals Type - Type - Type - Type -6 (not Quick-Turn) (not Quick-Turn).07 Dia Dia..08 (.6)...07 Dia..070 (.78)... Dia. (.0).0.00 (.7) Figure Thru-Hole Figure Surface Mount Peel--Way Removable arriers Polyimide Film Peel away after soldering to P. Part # Part #.0/(.8).046/(.7) KE0-G KES0-0MG.00/(.7).00/(.7).070/(.78).00/(.7).08/(.6).070/(.78).08/(.6).0/(.8).0/(.8).0/(.8).04/(.09).0/(.8).046/(.7).06/(.7).06/(.7).06/(.6).08/(.06).08/(.6).09/(.6).00/(.4).0/(.7) Order one each & to get the required dim. KE0-G KE0-G KE0-G KE0-6G KE0-6G KE0-G KE0-6G KE0-G KE0-G KES0-0MG KES0-8MG KES0-8MG KES0-0MG KES0-8MG KES0-0MG KES0-46MG KES0-0MG KES0-8MG.6/(.9) KE0-G KES0-8MG position dual row part numbers shown. See How To Order section for ordering information. If required dimension is not shown, consult factory. Fig. # Solder fillets visible both sides for inspection and cleaning.. Place socket on P board.. Send P board and socket through soldering operation.. Peel away polyimide film carrier for complete solder joint visibility or leave in place for added stability. vailable Online: RoHS Qualification Test Report P Energy Way, West Warwick, RI 089 US Tel: Fax: atalog 6
Amphenol Docking Connectors
1 www.amphenol-aerospace.com/boardlevel.asp mphenol Docking onnectors mphenol erospace offers the ideal connector for applications where frequent docking to charge and transfer data is a necessity. Utilizing
More information3M Pin Strip Header 2 mm 2 mm Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series
M Pin Strip Header 2 2 Solder Tail Straight & Right Angle, Surface Mount Straight 1512 Series Mates with a variety of dual row 2 board mount and wire mount sockets High temperature insulator compatible
More information.062 [1.57] Commercial Pin and Socket Connectors
Pin and Socket onnectors MP Product Facts Polarized avity identification Low contact-mating force Dual locking lances Detent and positive locking ontacts available in brass and phosphor bronze with tin
More informationPCI Express Right Angle Connector System
PI Express Right ngle onnector System www.erni.com atalog E XXXXXX 09/08 Edition 1 www.erni.com atalog E XXXXXX 09/08 Edition 1 PI Express Right ngle onnector System Table of ontents General...2 Features...2
More informationFigure 1 (end) Application Specification 114 13088 provides application requirements for MICTOR Right Angle Connectors for SMT PC Board Applications
This specification covers requirements for application of MICTOR Vertical Board to Board Plugs and Receptacles designed for pc boards. The connectors have an in row contact spacing on 0.64 [.025] centerlines.
More informationSTANDARD MICRO-D CONNECTORS
STANDARD MICRO-D CONNECTORS RECTANGULAR CONNECTORS Pigtail connector - Metal shell.............................. 56 Pigtail connector - Low profile - Metal shell.................... 58 Pigtail connector
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationFOR BOARD-TO-CABLE CONNECTION
FOR OARD-TO-ALE ONNETION 230 SERIES (FOR FLAT ALE ONNETION) FEATURES Two 1.27 mm (0.050 in.) pitch flat cables can be used. 1.27 mm (0.05 in.) pitch contact arrangement in two rows and terminal arrangement
More informationWhite Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit?
Recommendations for Installing Flash LEDs on Circuits By Shereen Lim White Paper Abstract For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex
More information3M Pin Strip Header Single and Dual Row.100,.235 /.318 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header Single and Dual Row.100,.25 /.18 Mating Length, &, Solder Tails 929 Series Stackable Gold, Matte Sn, or -Lead plating options High Temperature (PCT) plastic for Wave or IR soldering
More informationCONEC SnapLock. 1 Introduction
CONEC SnapLock E L E C T R O N I C C O N N E C T O R S 1 Introduction The new CONEC SnapLock locking system consists of D-SUB connectors and D-SUB hoods allowing quick and safe locking without any additional
More informationFlexible Printed Circuits Design Guide
www.tech-etch.com/flex Flexible Printed Circuits Design Guide Multilayer SMT Assembly Selective Plating of Gold & Tin-Lead Fine Line Microvias Cantilevered & Windowed Leads 1 MATERIALS CONDUCTOR Copper
More informationA Series 1-4 Pole Rotary Switches
1-4 Pole Switches Features/Benefits Multi-pole and multi-position Positive detent Shorting & non-shorting contacts Panel and PCB mounting RoHS Compliant Typical Applications Automotive Major and small
More informationAZ420 MINIATURE GENERAL PURPOSE RELAY
MINIATURE GENERAL PURPOSE RELAY FEATURES Rugged construction for high reliability Life expectancy greater than 0 million operations DC coils to 11 V Power consumption as low as 2 mw per pole available
More informationTwo Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts
Product Specification 108-19346 17 APR 2013 Rev F Two Position Cable-to-Board Power Connector System (Right Angle/Straight) with Coding Contacts 1. SCOPE 1.1. Content NOTE The product may not perform according
More information3M Serial Attached SCSI (SAS) Connector Boardmount Compliant Pin and Surface Mount, Vertical Receptacle
M Serial Attached SCSI (SAS) Connector 6 Gbps input/output connector for backplane applications Two contact mating levels for early-mate and latebreak allows blind mating or hot swap applications Capable
More informationSESD Series Ultra Low Capacitance Discrete TVS
SESD Series Ultra Low apacitance Discrete TVS RoHS Pb GREEN ELV Description The SESD Series Ultra Low apacitance Discrete TVS provides unidirectional and bidirectional ESD protection for the world s most
More informationSFP Single Port Multi-Port Ganged
Single Port Multi-Port Ganged Amphenol s SFP connector series is a 20 position connector and cage combo for mounting to a host PCB with a metal cage enclosing the connector. These connectors are similar
More informationCOAXICON Contacts. RF Coax Connectors. Product Facts
COXICON Contacts Product Facts Tyco Electronics provides a variety of contacts for coaxial connectors Contacts are available in a range of sizes that may be used with the various types of coaxial cable
More informationFASTON Printed Circuit Board Tabs and Receptacles
FSTON Tabs and eceptacles Product Facts Full line of PC tabs and receptacles Straight and right-angle tabs available in 50, 87 and 0 series eceptacles produced in 50/05 x 03 or 05 Standard or low insertion
More informationNARROW-PITCH (0.8mm) CONNECTORS P8 SERIES
Socket Header Compliance with RoHS Directive NRROW-PITCH CONNECTORS FOR PC ORDS 3. Perfect for portable devices, the bellows-type provide a strong resistance against falling, impacts, and forced insertions
More informationCMD Series. 4 Contact Row High Density Signal Connectors. Technical Characteristics
MD Series 4 ontact Row High Density Signal onnectors Offset-grid layout, four rows within dielectric connector body, mm center-to-center spacing in each row and row-to-row spacing. 0.6 mm nominal pin DI
More information3M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series
M Pin Strip Header.100,.295 Mating Length, Straight & Right Angle, Solder Tails 929 Series Stackable Tin Lead or gold plating available Solder stand-offs facilitate production wave soldering Board pin
More informationAC SERIES DUAL 1/4 (6.35mm) / XLR
AC SERIES DUAL 1/4 (6.35mm) / XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 ) phone jack
More informationUSB3.0 Micro-B Connector
USB3.0 Micro-B Connector ZX360 Series General The ZX360 Series is a Micro-USB connector that is compliant with the MicroUSB 3.0 specifications and supports up to 5Gbps high speed data transmission. As
More informationTEST SOLUTIONS CONTACTING - SEMICONDUCTOR
ENGINEERED TO CONNECT CONTACTING - SEMICONDUCTOR TEST SOLUTIONS SPECIFICATIONS AND DRAWINGS ARE SUBJECT TO ALTERATION WITHOUT PRIOR NOTICE - DIMENSIONS IN MILLIMETER CONTACTING - SEMICONDUCTOR 3 SEries
More informationSeries Connectors for PCB
HE 8 / 127 Series Connectors for PCB MAIN CHARACTERISTICS Main features The 127 series circuit board connectors are available in 3 different versions: HE 801 / 127: E 301/B From 17 to 144 signal contacts,
More informationTrapezoidal-Connectors Series TMC
Trapezoidal-Connectors Series TMC Subminiature-D Connectors to DIN 41 652/IEC 807-3 General Series TMC connectors are available in 5 different housing sizes with 9, 15, 25, 37 and 50 pins. In applications
More informationGeneral Specifications
Series M eneral Specifications Miniature Supplement ccessories Indicators Touch Tilt Tactiles Slides Rotaries Keylocks Programmable Illuminated PB Pushbuttons Rockers Electrical apacity (Resistive Load)
More informationTechnical Specifications
Technical Specifications Series Fischer Connectors S SaintPrex, Switzerland Phone +41 21 800 95 95 Fax +41 21 800 39 24 www.fischerconnectors.com mail@fischerconnectors.ch Multipole Product range covered:
More informationAmphenolR. Now you're connected!
Table of Contents CoolPower Overview... Page 3 CoolPower Slim Drawer - DW Series... Page 4 CoolPower D-Sub - LCC17 Series... Page 7 Amphenol Power Solutions... Page 9 Other Amphenol Commercial Products...
More informationPrinted Circuit Board Terminals and Disconnects
Printed ircuit oard Terminals and Disconnects 2 Disclaimer While Tyco Electronics orporation and its affiliates referenced herein ( Tyco Electronics ) have made every reasonable effort to ensure the accuracy
More informationXG2. Flat Cable Connectors for PCBs. Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring. Terminal Arrangement
Flat Cable Connectors for PCBs XG2 Achieve Total Cost Reduction through High-density Mounting and Reduced Wiring IDC connections allow you to wire all terminals at once without terminating the cable. Can
More informationAMP. 5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Soft Shell Pin and Socket Connectors. Product Facts. Standard Density
5.0 mm Power Key Connectors (5.0 PKC) (Wire-to-Board) Product Facts Compact design with 19.4 mm mated height Power circuit connector with 5.0 mm contact centerline Wire-to-board connectors consisting of
More informationCIN::APSE COMPRESSION TECHNOLOGY GET CONNECTED...
CIN::APSE COMPRESSION TECHNOLOGY E N A B L I N G T E C H N O L O G Y F O R T H E M O S T D E M A N D I N G I N T E R C O N N E C T A P P L I C AT I O N S GET CONNECTED... CIN::APSE It takes more than an
More informationUniversal MATE-N-LOK Connectors
Product Facts Pins and sockets can be intermixed in the same housing Positive polarization Rear cavity identification completely enclosed in housings Positive locking housings Insulation capability to.00
More informationInstallation information. METTLER TOLEDO MultiRange Floor scales / Pit scales
Installation information METTLER TOLEDO MultiRange Floor scales / Pit scales KC300/KCS300 KC600/KCS600 KD600/KD1500 KE1500/KE3000 KES1500/KES3000 KG3000/KG6000 KN1500 Floor scales / Pit scales Contents
More informationPC/104, PC/104 -Plus, VarPol connectors
164 PC/104, PC/104 -Plus, VarPol connectors Definitions 166 Technical specifications 168 Hole specifications 169 PC/104 170 PC/104-Plus 172 Accessories: PC/104 and PC/104-Plus 174 VarPol angled pin header
More informationISO VIEW OF AX SERIES XLR CABLE CONNECTOR
ISO VIEW OF AX SERIES XLR CABLE CONNECTOR One piece ground / latch spring design incorporating twin wipe contacts for a direct connection path from mating shell to ground providing enhanced connection
More informationFlex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
More informationIEC Connectors. Introduction
Introduction IEC Connectors A full range of quality mains rated inlets, outlets and connectors conforming to IEC and EN 60320 specifications carrying UL, CSA, VDE and other approvals. With electrical ratings
More information.093 [2.36] Commercial Pin and Socket Connectors
Product Facts Polarized Cavity identification Low contact-mating force Dual locking lances Detent and positive locking Contacts available in brass and phosphor bronze with tin and gold plating Panel mounting
More informationGas Discharge Tube (GDT) Products CG5 and SL0902A Series. CG5 and SL0902A Series
Description Agency Approvals AGENCY AGENCY FILE NUMBER E128662 2 Electrode GDT Graphical Symbol Littelfuse Broadband Optimized SL0902A Series offers high surge ratings in a miniature package. Special design
More informationWELCOME TO VIASION. www.viasion.com
WELCOME TO VIASION www.viasion.com BRIEF INTRODUCTION Viasion Technology Co., Ltd is a professional Printed Circuit Board (PCB) manufacturer in China. With around 1500 employees totally in 2 different
More information2S-Series Sub-Miniature Toggle Switches
Carling Technologies S-Series Sub-Miniature Toggle Switch SS-Series Sealed Sub-Miniature Toggle Switch SM-Series Sealed Surface Mount Sub-Miniature Toggle Switch S-Series Ordering Scheme Specifications
More informationINNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION.
CONNECTORS 2014 INNOVATION SUPPORTED BY A TRULY SOLID INDUSTRIAL ORGANIZATION. Stelvio Kontek S.p.A. is one of the leading groups in the connectors market. With a solid background in the sector and having
More informationAC SERIES-C TYPE DUAL CONNECTORS JACK/XLR
AC SERIES-C TYPE DUAL CONNECTORS JACK/XLR The AC Series C type chassis receptacles feature two connectors in the one space saving housing. A combined XLR female receptacle together with a 6.35mm (1/4 )
More informationFASTIN-FASTON Product Line
FSTIN-FSTON Product ine Product Facts Used for single and multiple connections eceptacles and tabs available for 6.3, 4.8 and.8 mm size (.50.87 and.0 Series) eceptacles mate with 0.5 and 0.8 thick tabs
More informationFor board-to-fpc. Narrow Pitch Connectors (0.35mm pitch)
For board-to-fpc Narrow Pitch Connectors (0.35mm pitch) S35 Series New FEATURES 1. 1.7 mm wide slim two-piece type connector Mated height 0.6 mm Smaller compared to A4F series Width: Approx. 44% down
More informationApplication Specification Dual In- Line Memory Module 114-13087 (DIMM) Sockets- DDR2 Solder Tail 05 APR 11 Rev D
Application Specification Dual In- Line Memory Module 114-13087 (DIMM) Sockets- DDR2 Solder Tail 05 APR 11 Rev D NOTE i All numerical values are in metric units [with U.S. customary units in brackets].
More informationFlexible Circuit Simple Design Guide
Flexible Circuit Simple Design Guide INDEX Flexible Circuit Board Types and Definitions Design Guides and Rules Process Flow Raw Material Single Side Flexible PCB Single Side Flexible PCB (Cover layer
More information(11) PCB fabrication / (2) Focused assembly
Company Fact Sheet TTM Technologies, Inc. is a world-wide leader in the manufacture of technologically advanced PCBs, backplane and sub-system assemblies. Our Global Presence / Local Knowledge approach
More informationHow To Build A Powerline Box Powerline Generator
Quick Reference Guide DYNAMIC Series Dynamic Series is a broad product family that provides connector solutions ranging from signal level circuitry through power circuit connectivity in a ruggedized, industrialized
More informationAmphenol Sincere. Electronic Integration & Flexible Printed Circuits. Aerospace. Health Care. Heavy Equipment HEV. Industrial
Amphenol Sincere Health Care Aerospace Heavy Equipment HEV Industrial Electronic Integration & Flexible Printed Circuits About Amphenol The second largest manufacturers of interconnect products 87 worldwide
More informationSMA Interface Mating Dimensions (Per MIL-STD-348)
SMA Series SMA 6 SMA Interface Mating Dimensions (Per MIL-STD-348) SMA Interface Dimensions MALE Inches/Millimeters 3 Minimum Nominal Maximum LTR in. mm in. mm in. mm A.250 6.35.263 6.68.. B.1790 4.55.1808
More information8060 Series Alternate Action and Momentary Pushbutton Switches
Features/Benefits Long travel vailable with LED Long life contact design Epoxy terminal seal compatabile with bottom wash cleaning RoHS compliant models available Typical pplications Instrumentation Computers
More informationFEATURES. Catalog C-031 Rev. H
FEATURES Average power contact resistance is less than 0.001 ohms Average signal contact resistance is less than 0.005 ohms RoHS compliant Catalog C-031 Rev. H - The Leader in Power Connector Solutions
More informationSMS - Qikmate. Performance characteristics
- Qikmate Qikmate panel and cable connectors Description The versatile Qikmate panel and cable connectors are a highly cost-effective system approach to solving the constant demand for more cost effective
More informationModel CS 64 Mini-DIN Cable and Adaptor
Model CS 64 Mini-DIN Cable and Adaptor Page 1 of 9 Features Hi-Pro and NOAHlink compatible cable & Mini-DIN CS 64 Clip Module / NOAHlink Adaptor #1 Integrated Clip Module - Mini-DIN Cable Integrated NOAHlink
More informationDFX - DFM for Flexible PCBs Jeremy Rygate
DFX - DFM for Flexible PCBs Jeremy Rygate 1 Jeremy Rygate 30 years experience with Front End in the Electronics industry and PCB manufacturing. Experience in advanced PCBs, particularly Flex, Flex-rigid
More informationReballing Rework Bright New Future
Reballing Rework Bright New Future Components are continuing to evolve. One of those evolutions is the Ball Grid Array or BGA. Add in the advent of the RoHS and WEEE directives and rework of the BGA is
More informationCIN::APSE MICROMINIATURE D-SUB
INTRODUCTION CINCH has been producing filter connectors for years and has acquired an in depth knowledge of EMC protection. CINCH offers fast delivery on a wide range of standard filtered connectors and
More informationConnectors. product overview. Edition 3
Connectors product overview Edition 3 Editorial Good connections bear a name: ept Thomas Bernhard Claus Guglhör Guglhör Guglhör ept designs, produces and distributes electronic connectors for highquality
More information400 Series - Mini USB Buccaneer
IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,
More informationAMP Soft Shell Pin and Socket Connectors
Soft Shell Pin and Socket Connectors Restriction on the use of Hazardous Substances (RoHS) t Tyco Electronics, we re ready to support your RoHS requirements. We ve assessed more than 1.5 million end items/components
More informationMini USB and USB 2.0-IP67 Connector System
Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet
More informationInterface RF Connector with Switch
NEW Interface RF onnector with Switch Series Overview Designed for end user applications requiring redirection of transmission from internal built-in antenna to the external antenna. Small size, lightweight
More informationwww.tvsat.com.pl COAXICON Series Mobile Phone Switching Coax Connectors RF Coax Connectors Product Facts
COXICON Series Mobile Phone Switching Coax Connectors Product Facts ble to switch RF signal from internal to external antenna SMD component for standard pick & place Up to 2.4 GHz Up to 30,000 life cycles
More informationMDM. High performance Microminiature connectors, ESA qualified, for space applications.
Microminiature Connectors High performance Microminiature connectors, ESA qualified, for space applications. Suitable for Board-to Board, Board-to Cable or Cable-to Cable applications. Space/High reliability
More informationNanoPower P110 Series Solar Panels Datasheet
NanoPower P110 Series Solar Panels Datasheet Highly Effecient Solar Panel with Integrated Magnetorquer, Sun Sensor, Gyroscope and Thermistor for CubeSats NanoPower P110 Series Solar Panels The NanoPower
More information050-123 BF15U2-2570. REV DESCRIPTION DATE APPROVED 2 Preliminary 1/7/2016 RAS/MF
Copper to Fiber Single Channel Ethernet Media Converter 10/100/1000BASE-T to Single Fiber 1310/1550 Bidirectional Optical Ethernet 28VDC M38999 (Signal), M38999 (Power), M38999 (Fiber Optic) REV DESCRIPTION
More information0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
More information1000 Series Miniature Slide Switches
Miniature Switches Features/Benefits Variety of actuators and terminations Panel mount tabs available Epoxy terminal seal compatible with bottom-wash cleaning RoHS compliant Typical Applications Test &
More informationTC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
More informationFigure 1 (end) Updated document to corporate requirements Added text to Paragraph 2.4
This specification covers the requirements for application of ELCON Drawer Series Connectors: True Hot Plug, Blind Mating Mixed Signal and Power Connectors. These connectors are designed for use in pluggable
More information400 Series Buccaneer BUCCANEER POWER. bulgin
bulgin BUCCANEER FOR POWER Contact Retainer Sealing Gasket O Ring Contacts Locking Ring Retaining Nut Panel Body Contacts Contact Carrier O Ring Main Body Cable Gland Collet Gland Nut Sealed to IP68 when
More informationPRODUCT SPECIFICATION
ipass TM / ipass+ TM 0.8 mm PITCH I/O CONNECTOR SYSTEM EXTERNAL ipass / ipass+ of TABLE OF CONTENTS.0 SCOPE... 3.0 PRODUCT DESCRIPTION... 3. PRODUCT NAME AND SERIES NUMBER(S)... 3. DIMENSION, MATERIALS,
More information3M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series
M Mini D Ribbon (MDR) Connectors.050 Surface Mount Right Angle Receptacle - Shielded 102 Series Wiper-on-wiper contact for reliable repetitive plugging Ultra-low signal skew for high data rate transmission
More informationC&K 7000 Series Miniature Toggle Switches
Miniature Switches Features/Benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More information1 mm Pitch Double Rows Low Profile Board-to-Cable Connectors
NEW mm Pitch Double Rows Low Profile Board-to-Cable Connectors DF series Cable.4 Socket DF- **DS-C.8 DFF(G)- **DP-V Pin Header DF- **DS-C Socket Cable 6. PCB DFF **DP-H. Pin Header PCB Features. Contact
More informationSIL Resistor Network. Resistors. Electrical. Environmental. L Series. Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant
Resistors SIL Resistor Network Thick Film Low Profile SIP Conformal Coated Resistor Networks RoHS Compliant All parts are Pb-free and comply with EU Directive 2011/65/EU (RoHS2) Electrical Standard Resistance
More informationWhat is surface mount?
A way of attaching electronic components to a printed circuit board The solder joint forms the mechanical and electrical connection What is surface mount? Bonding of the solder joint is to the surface
More informationOperating Temperature Range: -30 to +85ç (Note 1) Operating Humidity Range: 40 to 80%
All non- products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website search at www.hirose-connectors.com, or contact your Hirose sales representative.
More informationPCB inspection is more important today than ever before!
PCB inspection is more important today than ever before! Industry experts continue to stress the need to inspect hidden solder joints! Figure 1. The BGA package has not been placed into the paste deposit.
More informationHOSE & CABLE PROTECTION
HOSE & CALE PROTECTION Product Page AccessTrak, TrukTrak and TredTrak 2-5 FloorTrak 6 CableTrak Modular Carrier Track 7-9 Page 2 HOSE and CaLE PrOTECTION Features and enefits The AccessTrak ramping system
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationSlimSeal SSL Connector. Now Available in 1 Position. Free Hanging Version
Now Available in 1 Position Free Hanging Version SlimSeal SSL Connector The SlimSeal SSL connectors are low profile, single row connectors developed for indoor and outdoor LED lighting applications. These
More informationELECTRONICS CONNECTORS FOR FLEXIBLE CIRCUITRY FFC/FPC/CIC
ELECTRONICS CONNECTORS FOR FLEXIBLE CIRCUITRY FFC/FPC/CIC FCI: SETTING THE STANDARD FOR CONNECTORS With operations in 30 countries, FCI is a leading manufacturer of connectors. Our 13,000 employees are
More informationS Series Slide Switches
Switches Features/Benefits 6 to 15 AMPS Enclosed housing PC and Snap-in panel mounting Reversing option RoHS compliant Typical Applications Portable tools Small appliances Floor care products Models Available
More informationMicro-USB connectors meeting requirements of USB 2.0 Standard
All non-rohs products have been discontinued, or will be discontinued soon. Please check the products status on the Hirose website RoHS search at www.hirose-connectors.com, or contact your Hirose sales
More information7000 Series Miniature Toggle Switches
Miniature Switches eatures/benefits Multi-pole and multi-position Wide variety of actuator and termination options Epoxy terminal-seal compatible with bottom wash cleaning RoHS complaint models available
More informationIndex. 2.40 mm Connector Series. 2.40 mm Connectors (50 GHz)... Page. Interface Standards... 44. Specifications... 45. Connector Numbers...
Connector Series Index (50 GHz).... Page Interface Standards... 44 Specifications... 45 Connector Numbers... 46 Typical Test Data... 48 End : can be found in the Adapter section. : can be found in the
More informationControl Stations Made of Polyester Resin Series 8146
ontrol Stations Made of Polyester Resin www.stahl.de > s made of glass-fibre reinforced polyester resin > 8 basic enclosure sizes with various enclosure heights > an be combined to larger units > Equipped
More informationOutside Plant Precision Cooling Site Monitoring and Services
Emerson Network Power Connectivity Solutions Johnson 299 Johnson Avenue Waseca, MN 56093 USA Tel: 800.247.8256 Fax: 507.833.6287 www.emersonnetworkpower.com/connectivity About Emerson Network Power Connectivity
More informationCompliant Terminal Technology Summary Test Report
Engineering Report ER04100 October 5th, 2004 Revision A Copyright Autosplice Inc., September 2004 Table of Contents Summary Overview 3 Compliant Terminal Specifications 3 Test Plan 4 Test Conditions 4
More informationCannon Microminiature Connectors. Electronic Components
annon Microminiature onnectors Electronic omponents annon Microminiature Products High Performance Micro Miniature onnectors ITT Electronic omponents is a division of the multinational ITT orporation a
More informationAMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
More information2 Axis Solar Tracker / 12 Kw
2 Axis Solar Tracker / 12 Kw 4 Rows 14 metres 4 rows x 14 metres Quantity / Panel Type: 68 units Photovoltaic panel 1.600 x 790 mm Panel power / Total power: 165 W 11,2 Kw Total Surface: 94 m² Diameter
More informationCOPPER FLEX PRODUCTS
COPPER FLEX PRODUCTS WHY FLEX? Molex ible Printed Circuit Technology is the answer to your most challenging interconnect applications. We are your total solution for ible Printed Circuitry because we design
More information