1. PRODUCT NAME AND COMPANY IDENTIFICATION

Transcription

1 Rocky Mountain Juniper Supercritical Extract SDS Safety Data Sheet 1. PRODUCT NAME AND COMPANY IDENTIFICATION Product Name: Product Use: Product Number: Supplier: Date Issued: Prepared by: Emergency Telephone Number: National Response Center: Rocky Mountain Juniper Supercritical Extract Flavor and fragrance component Blue Marble Biomaterials 5840 Expressway Missoula, MT USA 04/01/2013 Erik Berry US & Canada: +1 (800) International: +1 (813) Contract #: MIS (800) HAZARDS IDENTIFICATION Emergency Overview OSHA Hazards: GHS Classification: Irritant GHS Label Elements, including precautionary statements Pictogram: Signal Word: Hazard Statement(s): Precautionary Statement(s): HMIS Classification: Health Hazard: Flammability: 1 2 Page 1 of 8

2 Physical Hazards: 0 NFPA Rating: Health Hazard: Fire: Reactivity Hazard: Potential Health Effects Eyes: Skin: Inhalation: Ingestion: Potential environmental effects: May cause eye irritation. May be harmful if absorbed through skin. May cause skin irritation. May be harmful if inhaled. May cause respiratory tract irritation. May be harmful if swallowed. 3. COMPOSITION/INFORMATION ON INGREDIENTS Synonyms: Formula: Molecular Weight: Component Classification Concentration Rocky Mountain Juniper Supercritical Extract CAS No.: NA - - EC No.: NA - - General Advice: Inhalation: Skin contact: 4. FIRST AID MEASURES Consult a physician if irritation persists. Show this safety data sheet to the doctor in attendance. Move out of dangerous area. If inhaled, move person into fresh air. If not breathing, give artificial respiration. Consult a physician if irritation persists. Wash off with soap and plenty of water. Consult a physician if irritation persists. Wash contaminated clothing before reusing. Eye contact: Rinse thoroughly with plenty of water for at least 15 minutes. Consult a physician if irritation persists. Ingestion: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician if irritation persists. Page 2 of 8

3 5. FIREFIGHTING MEASURES Extinguishing media: Special protective equipment for firefighters: Hazardous combustion products: Further information: For small (incipient) fires, use media such as "alcohol" foam, dry chemical, or carbon dioxide. For large fires, apply water from as far as possible. Use very large quantities (flooding) of water applied as a mist or spray; solid streams of water may be ineffective. Cool all affected containers with flooding quantities of water. Wear self-contained breathing apparatus for fire fighting if necessary. 6. ACCIDENTAL RELEASE MEASURES Personal Protection Measures: Environmental Protection Measures: Methods and materials for containment and cleanup: Use personal protective equipment. Avoid breathing vapors, mist or gas. Remove all sources of ignition. Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Absorb with inert material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal. Dispose of according to local regulations (see section 13). 7. HANDLING AND STORAGE Safe Handling: Safe Storage Conditions: Avoid inhalation of vapor or mist. Keep away from sources of ignition - No smoking. Do not breathe gas/fumes/ vapor/spray. Keep container tightly closed in a dry and well-ventilated place. Containers that are opened must be carefully resealed and kept upright to prevent leakage. Store in a cool place. 8. EXPOSURE CONTROLS/PERSONAL PROTECTION Personal Protective Equipment Respiratory: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multi-purpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air Page 3 of 8

4 Hand: Eye: Skin and Body: Hygiene Measures: respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU). Handle with chemically resistant gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching gloves outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. Wear tightly fitting safety goggles. Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU). Choose body protection according to the amount and concentration of the dangerous substance at the work place. Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday. 9. PHYSICAL AND CHEMICAL PROPERTIES Appearance Physical state: Color: Odor: Safety Data ph: Melting point/freezing point: Boiling point: Flash point: Ignition temperature: Autoignition temperature: Lower explosion limit: Upper explosion limit: Vapor pressure: Density: Water solubility: Relative vapor density: Odor threshold: Evaporation rate: Liquid Green, brown. Terpenic, green, woody, spicy, cedar. Insoluble. Page 4 of 8

5 Specific Gravity: Molecular Weight, g/mol: Refractive Index, at 20 C: Viscosity, cp at 20 C 10. STABILITY AND REACTIVITY Chemical stability: Possibility of hazardous reactions: Conditions to Avoid: Materials to Avoid: Hazardous Decomposition or Byproducts: Hazardous Polymerization: Stable under recommended storage conditions. 11. TOXICOLOGICAL INFORMATION Acute Toxicity Oral LD50: Inhalation LC50: Dermal LD50: Other information on acute toxicity: Skin corrosion/irritation: Serious eye damage/eye irritation: Respiratory or skin sensitization: Germ cell mutagenicity: Carcinogenicity IARC: ACGIH: NTP: OSHA: Reproductive Toxicity: Page 5 of 8

6 Teratogenicity: Specific target organ toxicity single exposure (GHS): Specific target organ toxicity repeated exposure (GHS): Aspiration hazard: Potential health effects Eyes: Skin: Inhalation: Ingestion: Signs and symptoms of exposure: Synergistic effects: Additional information: May cause eye irritation. May be harmful if absorbed through skin. May cause skin irritation. May be harmful if inhaled. May cause respiratory tract irritation. May be harmful if swallowed. 12. ECOLOGICAL INFORMATION Toxicity Toxicity to fish: Toxicity to daphnia and other aquatic invertebrates: Persistence and degradability: Bioaccumulative potential: Mobility in soil: PBT and vpvb assessment: Other adverse effects: 13. DISPOSAL CONSIDERATIONS Product: Contaminated Packaging: Observe all federal, state, and local environmental regulations. Contact a licensed professional waste disposal service to dispose of this material. Dispose of as unused product. Page 6 of 8

7 14. TRANSPORT INFORMATION DOT Not a DOT controlled material (USA). IMDG Not a dangerous good. IATA Not a dangerous good. 15. REGULATORY INFORMATION OSHA Hazards Irritant SARA 302 Components SARA 313 Components SARA 311/312 Hazards Massachusetts Right To Know Components Pennsylvania Right To Know Components New Jersey Right To Know Components California Prop. 65 Components TSCA 8(b) Inventory: Juniper Oil Health & Safety Reporting List: Chemical Test Rules: TSCA Section 12(b) Export Notification: TSCA Significant New Use Rule: CERCLA Hazardous Substances and Corresponding RQs: Clean Air Act: Clean Water Act: Connecticut hazardous material survey: Massachusetts spill list: WGK (Water Danger/Protection): Canada DSL/NDSL: Page 7 of 8

8 Canada WHMIS: This product is not classified according to the EU regulations. Canadian Ingredient Disclosure List: European Labeling in Accordance with EC Directives Hazard Symbols: Risk Phrases: Safety Phrases: 16. ADDITIONAL INFORMATION This information is provided for documentation purposes only. The complete range of conditions or methods of use are beyond our control therefore we do not assume any responsibility and expressly disclaim any liability for any use of this product. Information contained herein is believed to be true and accurate however, all statements or suggestions are made without warranty, expressed or implied, regarding accuracy of the information, the hazards connected with the use of the material or the results to be obtained from the use thereof. Compliance with all applicable federal, state, and local laws and local regulations remains the responsibility of the user. This safety sheet cannot cover all possible situations, which the user may experience during processing. Each aspect of your operation should be examined to determine if, or where, additional precautions may be necessary. All health and safety information contained in this bulletin should be provided to your employees or customers. Page 8 of 8