Commercial Water Heaters

Transcription

1 POCKET GUIDE Commercial Water Heaters from Perfect Fit HEATER3

2 Why is Perfect For Your Commercial Line. Trouble Zone The Perfect Fit Zone 156,000 BTU 199,900 BTU 250,000 BTU 300,000 BTU 360,000 BTU 399,900 BTU Competitor s larger units mean a difficult installation. Perfect Fit TM heavy duty gas models are shorter and narrower for easy and convenient installation.

3 Call Your Perfect Fit Sales Representative for a Custom Review of Your Commercial Market. Instant Diagnostics and Troubleshooting Our exclusive LED System Sentinel TM verifies electric element operation and location through a series of lights on a control panel. If an element isn t working, the missing light tells you exactly which one needs maintenance, eliminating guesswork on your part.you save time in installation, startup, and during maintenance problem solving. And you get your water supply back on line much faster. Super-Efficient, Super-Durable Heating Elements Electric models feature our LIFEGUARD TM electric heating elements, which operate at 98% efficiency. LIFEGUARD TM elements feature a stainless steel sheath surrounding a Nichrome wire filament for maximum resistance to water chemical corrosion and burnout, even when exposed to air or sediment. They re so good, that we offer a 3-year warranty on our elements instead of the normal 1-year. Accessories complete the line and the market fit. We provide a full range of accessories thermostats, T&P valves, burner assemblies and thermocouples to provide the contractor with everything he needs for installation. These items also give you additional margins and reinforce the profitability of commercial water heaters in your store.

4 Tap Into a Hot New Source for High Margin Sales. Perfect Fit gives you a small plan with a huge opportunity. Commercial water heaters can be a tremendous addition to your product mix. The market is big, and it covers a broad spectrum of businesses.you re surrounded by potential installations. Restaurants need thousands of gallons of hot water daily for dishwashing and food preparation. Hotels and motels have to meet guest demands for abundant hot water. Hospitals require instant access to hot water for cleaning, bathing patients, laundry and food preparation. And for hundreds of other businesses, hot water is an absolute necessity. The commercial water heater market is driven by immediate demand without hot water, there s no business. So to be successful, you have to have commercial units readily available. Fortunately, you can meet the needs of the majority of installations in the commercial water heater market with a small number of SKUs. Perfect Fit has made this easier than ever, with an all-new line of commercial water heaters, and a plan that reduces the SKUs you need to get involved. We ve also created the tools necessary for you to reach the commercial market and show the advantages of buying at your store.

5 The Commercial Water Heater Market At A Glance Over 140,000 Units Annually Nationwide 85% Replacement 15% New Construction 65% Gas 80% of Replacements Done by 20% of Contractors 4 or 5 SKUs account for 70% of installations Limited inventory, quick-ship replacement, strong margins now is the time. Over 70% of the commercial market can be serviced using just 4 or 5 models of heaters. Our merchandise plan lets you stock as few as six units in just one location and still have strong coverage of your commercial market. And since having product when the customer demands it is critical, we have quick-ship programs in place to restock your inventory as units are sold. Unlike the highly competitive residential market, the margins for commercials water heaters are substantial. And since competition is limited, they tend to stay that way.

6 TM The Perfect Fit line was created with the commercial customer in mind. Each heavy duty gas unit features smaller jacket diameters and shorter floor-to-vent heights to make replacement in tight squeeze situations easier, and to save space in new construction. These models have top, front, and rear inlet and outlet connections to make installation even easier. Electric models are also easy to install, and have self-diagnostic LED System Sentinel TM displays to verify element operation and location. And for special situations, the Perfect Fit TM line also includes point-of-use heaters, electric booster heaters, and commercial storage tanks all available for quick ship to your store. Low profile automatic flue damper to help minimize height Top, front, and rear outlet and inlet connections (up to 6) for easy installation Smaller diameters for easier replacement in tight situations More space saved in new construction Hand-hole cleanout for removing lime and sediment System Sentinal LED diagnostic system Full port, full flow drain valve Stainless Steel burner assembly that slides out for quick inspections

7 PERFECT FIT COMMERCIAL TABLE OF CONTENTS COMMERCIAL GAS WATER HEATERS Perfect Fit Models T50-98 thru T (A) Light Duty Models T60-50 thru T Induced Draft TD (A) thru TD (A) PowerVent TPV75-75E COMMERCIAL ELECTRIC WATER HEATERS Heavy Duty TES50, TES85 and TES Heavy Duty TE50(A), TE85(A) and TE120(A) Heavy Duty TE12A, TE20A, TE30A and TE40A Booster TE Light Duty Models TELD30 thru TELD Light Duty Models TELDS30 thru TELDS Point-of-Use TEGSP2 thru TEGSP Storage Tanks ST80(A), ST120(A) and ST175(A) RHEEM-RUUD TO PERFECT FIT CONVERSION CHARTS Perfect Fit Gas Products introduced 8/ Electric Point-of-Use and Light Duty Products Electric Heavy Duty Products Electric Instantaneous/Booster Products COMPETITOR CROSS REFERENCE INDEX A.O. SMITH Gas Tank Type BT, BTR Storage Tank Systems Electric Light/Heavy Duty & Boosters DEL, DEN, DRE, DVE, CMC, SU AMERICAN Gas Tank Type PVCG32, CG32, DCG32, PVDCG32, DCG Electric Light/Heavy Duty LDCE, ITCE, STCE, AITCE, ASTCE BRADFORD WHITE Gas Tank Type Storage Tank Systems Electric Heavy Duty Booster M-II-SF-CF, LI LOCHINVAR Gas Tank Type CNR, CNA Electric Light/ Heavy Duty & Boosters ETX, ETW, ESX, ETX, SB, HS, HC STATE Gas Tank Type SBT, SBF Electric Light /Heavy Duty SB6, LDE

8 2 COMMERCIAL GAS TANK-TYPE WATER HEATERS 98,000 BTU/HR. THRU 400,000 BTU/HR. (On Selected Models) (With Optional Leg Kit) Perfect Fit Features: Small jacket diameters Short floor-to-vent heights Multiple water connections System Sentinel LED diagnostic system Standard Features: 3 year limited tank warranty Patented multiflue design Low profile automatic flue damper Spark-to-pilot ignition system Full port, full flow brass drain valve Factory installed AGA/ASME rated T&P relief valve Handhole cleanout Stainless steel burners 180 max operating temperature LED diagnostics on all damper assemblies for easier service Certified for a 150 PSI maximum working pressure (160 PSI for ASME models) Manual reset high limit (ASME models) Low NOx models available OUTLET TOP OUTLET REAR SIDE SYSTEM SENTINEL G 7" (178mm) H E OUTLET FRONT SIDE C INLET FRONT SIDE INLET REAR SIDE T&P INLET TOP D F B A

9 RECOVERY CAPACITIES MODEL GAL. INPUT BTU/HR. THERMAL TEMP. RISE - GPH NUMBER CAP. NATURAL & L.P. EFFICIENCY T ,000 80% T ,000 80% T ,000 80% T ,000 80% T ,900 80% T ,900 80% T ,900 80% T (A) ,900 80% T72-250(A) ,000 80% T (A) ,000 80% T (A) ,000 80% T72-300(A) ,000 80% T85-300(A) ,000 80% T (A) ,000 80% T65-360(A) ,000 80% T65-400(A) ,900 80% T85-400(A) ,900 80% T (A) ,900 80% DIMENSIONAL INFORMATION (All dimensions shown in inches) A B C D E F G H WATER CONNECTIONS APPROX. SHIPPING CLEARANCES TO TOP FRONT REAR WEIGHT (LBS.) COMBUSTABLES IN/OUT SIDE SIDE STANDARD ASME SIDE REAR TOP 62-3/4 57-1/8 22-1/2 22-5/ /2 1/ /2 1-1/2 270 N/A 2" 2" 12" 65-1/ / / /2 1-1/2 1-1/2 480 N/A 2" 2" 12" 68-13/ / /8 3/ /2 1-1/2 1-1/2 490 N/A 2" 2" 12" 68-13/ / /8 3/ /2 1-1/2 1-1/2 540 N/A 2" 2" 12" 49-1/4 43-3/8 26-1/ /8 3/ /2 1-1/2 1-1/2 405 N/A 2" 2" 12" 68-13/ / /8 3/ /2 1-1/2 1-1/2 540 N/A 2" 2" 12" 76-5/ / /4 30-5/ /8 3/ /2 1-1/2 1-1/2 600 N/A 2" 2" 12" 73-1/ /8 30-1/4 23-1/ /2 3/ / " 4" 12" 71-1/ /2 26-1/ /8 3/ /2 1-1/2 1-1/ " 6" 12" 73-1/4 66-1/8 30-1/4 23-1/ /2 3/ / " 4" 12" 73-7/8 66-1/8 30-1/4 23-1/ /2 3/ / " 4" 12" /2 26-1/ /8 3/ /2 1-1/2 1-1/ " 6" 12" 78-7/ / /4 30-5/ /8 3/ /2 1-1/2 1-1/ " 6" 12" /2 30-1/4 32-1/ /4 3/ / " 4" 12" 70-11/ /2 26-1/ /8 3/4 N/A N/A 1-1/2 1-1/ " 6" 12" 70-11/ /2 26-1/ /8 3/4 N/A N/A 1-1/2 1-1/ " 6" 12" 78-13/ / /4 30-5/ /8 3/ /2 1-1/2 1-1/ " 6" 12" /2 30-1/4 32-1/ /4 1* / " 4" 12" Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. Recovery rate shown on the rating plate (75%) Thermal Efficiency in accordance with ANSI Z labeling requirements. (A) Indicates Available ASME Model. *3/4" for L.P. Models. Increase Height 3-5/8" for NSF Models. All Models Require a 120V Power Source. Available in Low NOx for S. Cal. and Texas markets. These models have been tested according to ANSI test procedures, and exceed the thermal efficiency and standby loss requirements of ASHRAE Standard 90.1b-2001 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commission (CEC). All models are North Carolina Code compliant. 3

10 GAS TANK-TYPE WATER HEATERS 50,000 BTU/HR. THRU 80,000 BTU/HR. 4 (with optional leg kit) Standard Features: Small jacket diameters Short floor-to-vent heights 3 year limited tank warranty Rigid foam insulation Heavy duty anode rod Factory installed AGA/ASME rated T&P relief valve Full port, full flow brass drain valve Gas control system Certified for a 150 PSI maximum working pressure Low NOx models available T60-50N and T75-75N meets S. Cal. and Texas requirements Order T100-80N for Low NOx A B D 1/2" F E C G 3/4" N.P.T. RELIEF VALVE OPENING SIDE TAPS (75 GAL. MODEL ONLY) T60-50 & G75-75 SIDE TAPS ON 75 GAL. MODEL ONLY T60-50 WATER CONNECTIONSARE 3/4" NPT A B D F E HOT & COLD C 1/2" GAS CONNECTION 3/4" T & P 2" T WATER CONNECTIONS ARE 1" NPT G T75-75 WATER CONNECTIONSARE 1" NPT

11 RECOVERY CAPACITIES MODEL CAP. INPUT TEMPERATURE RISE DEGREES F GALLONS PER HOUR NUMBER GALS. BTU/HR T60-50N 60 50, T60-50LP 60 50, T75-75N , T75-75 LP 75 63, T , T100-80N , Recovery rating is based on recovery efficiencies obtained in a CSA certified laboratory. N = Low NOx CLEARANCES TO COMBUSTIBLES MODEL REAR/ NUMBER SIDES FRONT TOP T " 3" 2" T " 3" 2" T " Alcove 12" DIMENSIONAL INFORMATION (All dimensions shown in inches) MODEL APPROX. SHIPPING NUMBER A B C D E F G WEIGHT (LBS.) T / /2 180 T /4 13-1/ /4 320 T /8 65-3/4 28-1/ /

12 (On Selected Models) (With Optional Leg Kit) Perfect Fit Features: Small jacket diameters Short floor-to-vent heights Multiple water connections System Sentinel LED diagnostic system Standard Features: 3 year limited tank warranty Patented multiflue design Factory installed draft inducer provides an induced draft allowing higher BTU's to be vented through a 6" vent 6 INDUCED DRAFT WATER HEATERS 250,000 BTU/HR. THRU 360,000 BTU/HR. 6" Category I appliance allows for easy upgrade or retrofit of existing applications Spark-to-pilot ignition system Full port, full flow brass drain valve OUTLET TOP OUTLET REAR SIDE SYSTEM SENTINEL G 7" (178mm) H E OUTLET FRONT SIDE C INLET FRONT SIDE INLET REAR SIDE T&P INLET TOP D F B A

13 RECOVERY CAPACITIES Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises. MODEL INPUT BTU/HR. THERMAL NUMBER NATURAL & L.P. EFFICIENCY UNITS 40 F 50 F 60 F 70 F 80 F 90 F 100 F 110 F 120 F 130 F 140 F TD (A) 250,000 80% GPH TD (A) 270,000 80% GPH TD (A) 310,000 80% GPH TD (A) 360,000 80% GPH Recovery ratings are based on thermal efficiencies obtained in a CSA certified laboratory. These models have been tested according to ANSI Z test procedures, and exceed the thermal efficiency and standby loss requirements of ASHRAE (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states. (A) indicates available ASME model. DIMENSIONAL INFORMATION All Dimensions Shown in English. WATER CONNECTIONS APPROXIMATE MODEL TOP FRONT REAR SHIPPING WEIGHT NUMBER UNITS A B C D E F G H IN/OUT SIDE SIDE STD. ASME TD (A) inches 73-1/2 66-3/4 30-1/4 23-1/ /2 3/ / lbs. 835 lbs. TD (A) inches 73-1/2 66-3/4 30-1/4 23-1/ /2 3/ / lbs. 835 lbs. TD (A) inches 73-1/2 66-3/4 30-1/4 23-1/ /2 3/ / lbs. 835 lbs. TD (A) inches 73-1/2 66-3/4 30-1/4 23-1/ /2 3/ / lbs. 835 lbs. All models require a 120V /3 amp power source. (A) suffix indicates ASME tank construction available. 7

14 POWERVENT GAS WATER HEATER 75,000 BTU/HR. 8 Standard Features: Uses 3" or 4" schedule 40 PVC, CPVC or ABS pipe Vents up to 95 feet Easy to install/maintain blower assembly Spark-to-pilot ignition system Low NOx burner Self-diagnostic thermostat/gas valve 2" rigid foam insulation 3 year limited warranty Factory installed AGA/ASME rated T&P relief valve Certified for a 150 PSI maximum working pressure Durable brass drain valve POWER VENT ASSEMBLY G HOT WATER CONNECTION A B 1/2" E C ANODE ROD G COLD WATER CONNECTION T&P FITTING 3/4" N.P.T. F SIDE TAPS D

15 DIMENSIONAL INFORMATION (All dimensions shown in inches) MODEL APPROX. SHIPPING NUMBER A B C D E F G WEIGHT (LBS.) TPV75-75FV /8 26-1/4 14-3/ / RECOVERY CAPACITIES MODEL INPUT BTU/HR. TEMPERATURE RISE - DEGREES F - GALLONS PER HOUR NUMBER NATURAL & L.P TPV75-75FV-2 75, TPV75-75PFV-2 70,

16 10 ELECTRIC TANK-TYPE WATER HEATERS 6 KW THRU 54 KW (With Optional Seal Kit) Standard Features: System Sentinel L.E.D. diagnostic system Surface mounted and immersion thermostat models available Lifeguard stainless steel elements 208, 240, 277 and 480 voltages 3 year limited tank warranty Manual reset high limit control Magnetic contactors and integral fusing 1-1/2" NPT inlet/outlet dielectric nipples factory installed 3" Rigid polyurethane foam insulation Heavy duty anode rods Full port, full flow, brass drain valve Factory installed AGA/ASME rated T&P relief valve Certified for a 150 PSI maximum working pressure (160 PSI for ASME models) Factory wired 3-phase Options: UL Sanitation compliant models avaliable Thermostat staging ASME construction available on E models 36 1 /8" 5" D C B 1 1 /2" HOT OUTLET NIPPLE SYSTEM SENTINEL AUTOMATIC TEMPERATURE CONTROL (IMMERSION ONLY) 1 1 /2" COLD INLET NIPPLE A

17 MODEL NUMBERS SURFACE MOUNTED THERMOSTATS Tank Capacity In Gallons IMMERSION THERMOSTATS Tank Capacity In Gallons TES50-6-G TES85-6-G TES120-6-G TE50-6-G TE85-6-G TE120-6-G TES50-9-G TES85-9-G TES120-9-G TE50-9-G TE85-9-G TE120-9-G TES50-12-G TES85-12-G TES G TE50-12-G E85-12-G TE G TES50-15-G TES85-15-G TES G TE50-15-G TE85-15-G TE G TES50-18-G TES85-18-G TES G TE50-18-G TE85-18-G TE G TES50-24-G TES85-24-G TES G TE50-24-G TE85-24-G TE G TES50-27-G TES85-27-G TES G TE50-27-G TE85-27-G TE G TES50-30-G TES85-30-G TES G TE50-30-G TE85-30-G TE G TES50-36-G TES85-36-G TES G TE50-36-G TE85-36-G TE G TES50-45-G TES85-45-G TES G TE50-45-G TE85-45-G TE G TES50-54-G TES85-54-G TES G TE50-54-G TE85-54-G TE G RECOVERY CAPACITIES INPUT EQUIVALENT TEMPERATURE RISE DEGREES F GPH KW BTU/HR , , , , , , , , , , , In accordance with ANSI test procedures, these models tested below the maximum allowable standby loss levels of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commision (CEC). DIMENSIONAL INFORMATION(All dimensions shown in inches) WATER TEMPERATURE RATINGS APPROX. SHIPPING MODEL WEIGHT (LBS.) NUMBER A B C D STD. ASME* TE(S) /8 26-1/ / TE(S) / / / TE(2) /8 30-1/ / *ASME construction available only on Immersion Thermostat Models. All models are North Carolina Code compliant. Minimum Maximum High Model Thermostat Delivered Delivered Temperature Number Type Temperature Temperature Limit TES50 Surface 90 F 160 F 180 F TES85, TES120 Surface 120 F 160 F 190 F TE50, TE85, TE120 Immersion 90 F 190 F 200 F 11

18 12 ELECTRIC TANK-TYPE WATER HEATERS 3 KW THRU 36 KW (With Optional Seal Kit) Standard Features: System Sentinel L.E.D. diagnostic system Immersion thermostat Lifeguard stainless steel elements 208, 240, 277 and 480 voltages 3 year limited tank warranty Manual reset high limit control Magnetic contactors and integral fusing 3/4" couplings 2-1/2" Rigid polyurethane foam insulation Heavy duty anode rods Brass drain valve Factory installed AGA/ASME rated T&P relief valve Certified for a 160 PSI maximum working pressure All models ASME certified Factory wired 3-phase Options: UL Sanitation compliant ring seal kits avaliable B 8" 3 /4" T&P A E 4 1 /4" 2 1 /2" D C SYSTEM SENTINEL AUTOMATIC TEMPERATURE CONTROL

19 INPUT KW MODEL NUMBERS IMMERSION THERMOSTATS Tank Capacity In Gallons TE12A-3-G TE20A-3-G TE30A-3-G TE40A-3-G TE12A-6-G TE20A-6-G TE30A-6-G TE40A-6-G TE12A-9-G TE20A-9-G TE30A-9-G TE40A-9-G N/A TE20A-12-G TE30A-12-G TE40A-12-G N/A TE20A-15-G TE30A-15-G TE40A-15-G N/A TE20A-18-G TE30A-18-G TE40A-18-G N/A N/A TE30A-24-G TE40A-24-G N/A N/A TE30A-27-G TE40A-27-G N/A N/A TE30A-30-G TE40A-30-G N/A N/A TE30A-36-G TE40A-36-G DIMENSIONAL INFORMATION All dimensions shown in inches MODEL In accordance with ANSI test procedures, these models tested below the maximum allowable standby loss levels of ASHRAE Standard 90.1b (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commision (CEC). APPROX. SHIPPING WEIGHT (LBS.) NUMBER A B C D E ASME TE12A 28-1/ /4 14-3/4 26-1/4 135 TE20A 36-1/ /4 14-3/4 26-1/4 160 TE30A 49-1/ /4 14-3/4 32-1/2 192 TE40A 53-3/ /4 16-1/2 32-1/2 228 WATER TEMPERATURE RATINGS Model Tank Capacity Thermostat Minimum Delivered Maximum Delivered High Temperature Number Gallons Type Temperature Temperature Limit TE12A 13 Immersion 90 F 190 F 200 F TE20A 19.9 Immersion 90 F 190 F 200 F TE30A 30 Immersion 90 F 190 F 200 F TE40A 40 Immersion 90 F 190 F 200 F RECOVERY CAPACITIES Recovery in U.S. Gallons/Hr. (GPH) at Various Temperature Rises INPUT EQUIVALENT 40 F 60 F 80 F 100 F 120 F 140 F KW BTU/HR. (22.2 C) (33.3 C) (44.4 C) (55.6 C) (66.7 C) (77.8 C) 3 10, , , , , , , , , , All models are North Carolina and Massachusetts Code compliant. 13

20 14 ELECTRIC BOOSTER WATER HEATERS 6 KW THRU 54 KW Standard Features: System Sentinel L.E.D. diagnostic system Immersion thermostats Manual reset high limit control 208, 240, 277 and 480 voltages 3 year limited tank warranty Magnetic contactors and integral fusing Heavy duty anode rods Durable brass drain valve Factory installed AGA/ASME rated T&P relief valve 6" stainless steel legs UL Sanitation compliant Certified for a 150 PSI max working pressure Factory wired 3-phase Factory Accessories Solid state low water cut-off Pressure reducing valve with bypass

21 RECOVERY CAPACITIES MODEL INPUT EQUIVALENT TEMPERATURE RISE DEGREES F GPH NUMBER KW BTU/HR TE10-6-G 6 20, TE10-9-G 9 30, TE10-12-G 12 40, TE10-15-G 15 51, TE10-18-G 18 61, TE10-24-G 24 81, TE10-27-G 27 92, TE10-30-G , TE10-36-G , TE10-45-G , TE10-54-G , Approximate Weight 110 Lbs. WATER TEMPERATURE RATINGS 3/4" T&P 21 3 /4" Minimum Maximum High Gallon Thermostat Delivered Delivered Temperature Capacity Type Temperature Temperature Limit 10 Immersion 90 F 190 F 200 F 17" 13 3 /4" 6" 5 3 /4" 8 1 /4" INLET 4 3 /4" OUTLET CONTACTORS FUSE BLOCKS (FUSED MODELS ONLY) TRANSFORMER TERMINAL BLOCK 1 1 /4" HOT OUTLET NIPPLE 1 1 /4" COLD INLET NIPPLE OPTIONAL THERMOSTATS (-GS MODELS ONLY) THERMOSTAT TEMPERATURE LIMIT CONTROL 21 1 /2" ELEMENT AND CLEANOUT ACCESS PANEL These models meet the energy efficiency levels of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy efficiency codes of all states including California Energy Commision (CEC). All models are North Carolina Code compliant. 15

22 ELECTRIC TANK-TYPE WATER HEATERS 3KW THRU 12KW 16 Standard Features: B DIA. 208, 240, 277, and 480 voltages Porcelain enamel lined tank Heavy duty anode rod 2-1/2" of rigid foam insulation Baked enamel steel jacket Patented resistor heating elements Surface mounted thermostat Manual reset high limit control 3 year limited warranty Certified for a 150 PSI maximum working pressure Factory installed AGA/ASME rated T&P relief valve Durable brass drain valve A HOT WATER CONNECTION 3/4" T&P 8" COLD WATER CONNECTION ANODE ROD WATER CONNECTIONS ALL 3/4" NPT

23 ELECTRICAL CHARACTERISTICS AND CAPACITIES (Non-Simultaneous/Single or Three Phase Operation) ELEMENT RECOVERY CAPACITIES GPH FULL LOAD CURRENT (AMPS) TEMPERATURE RISE OF (ALL TERMINALS) UPPER/LOWER / / / / / ELECTRICAL CHARACTERISTICS AND CAPACITIES (Simultaneous/Three Phase Operation) ELEMENT RECOVERY CAPACITIES GPH FULL LOAD CURRENT (AMPS) TEMPERATURE RISE OF (TERMINAL L3/TERMINALS L1 & L2) UPPER/LOWER / / / / / / / / / / / / / / / / / N/A 43.3/ /12.5 DIMENSIONAL INFORMATION* (All dimensions shown in inches) MODEL TANK CAPACITY APPROX. SHIPPING NUMBER GALLONS A B WEIGHT (LBS.) TELDS /2 22-1/4 105 TELDS / TELDS /2 26-1/4 150 TELD /2 17-3/4 90 TELD /4 22-1/4 108 TELD /4 127 TELD / TELD /2 200 TELD /2 28-1/4 330 WATER TEMPERATURE RATINGS: Thermostat Type: Surface Mounted Min. Delivered Temperature: 110 F Max. Delivered Temperature: 170 F High Temperature Limit: 190 F These models have been tested according to DOE test procedures, and exceed the minimum energy factor requirements of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commission (CEC). All models are North Carolina and Massachusetts Code compliant. * Dimensions reflect models built after 1/20/04. 17

24 POINT-OF-USE ELECTRIC TANK-TYPE 1440 WATTS THRU 6000 WATTS 18 Standard Features: 120, 208, 240, 277 and 480 voltages Porcelain enamel lined tank Heavy duty anode Rigid foam insulation Baked enamel steel jacket Resistor heating element Surface mounted thermostat Manual reset high limit control 3 year limited warranty Certified for a 150 PSI maximum working pressure Factory installed AGA/ASME rated T&P valve Optional wall mounting kit These models meet the minimum energy factor requirements of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact)). Also exceeds energy codes of all states including California Energy Commission (CEC). All models are North Carolina and Massachusetts Code compliant. ELEMENT AVAILABILITY WATTAGE 120 V 208 V 240 V 277 V 480 V 1,440 **Y N/A N/A N/A N/A 1,500 Y Y **Y N/A N/A 2,000 Y Y Y Y Y 3,000 Y Y Y Y Y 4,500 N/A Y *Y *Y *Y 6,000 N/A Y Y Y Y *Not available in TEGSP6 & TEGSP10 **TEGSP2 available only in these configurations.

25 DIMENSIONAL INFORMATION (All dimensions shown in inches)* MIN MAX TANK SHIPPING MODEL WATTS WATTS GALLONS A B C D E WEIGHT (LBS.) TEGSP2 1,440 1, / /4 18 TEGSP6 1,500 6, /8 15-3/4 12-5/8 11-5/8 4-1/4 41 TEGSP10 1,500 6, /8 15-3/4 20-3/8 19-3/8 4-1/4 53 TEGSP15 1,500 6, /4 17-3/4 21-7/8 19-3/8 4-5/8 65 TEGSP20 1,500 6, /8 19-3/4 22-5/8 19-5/8 5-1/8 76 TEGSP30 1,500 6, / /4 115 Basic model numbers are listed. When ordering specify electrical input to determine specific model number: Basic Model: TEGSP6 Specified Input: 6,000 Watts Specified Model Number: TEGSP6-6 * Dimensions reflect models built after 1/20/04. MODELS: TEGSP6 TEGSP10 TEGSP15 TEGSP20 TEGSP30 HOT WATER OUTLET C A Water Connections 3/4" NPT D COLD WATER INLET B 3/4" T&P E A B DIA. Water Temperature Ratings: Thermostat Type: Surface Mounted Min. Delivered Temperature: 110 F Max. Delivered Temperature: 170 F High Temperature Limit: 190 F HOT WATER CONNECTION 3/4" T&P MODEL: TEGSP2 Water Connections 1/2" NPT 3 1 /2" COLD WATER CONNECTION ELECTRICAL CHARACTERISTICS ELEMENT FULL LOAD CURRENT IN AMPERES WATTAGE 120 V 208 V 240 V 277 V 480 V 1, N/A N/A N/A N/A 1, N/A N/A 2, , ,500 N/A ,000 N/A All models employ 1 heating element resulting in a 2-wire outlet (single phase) electrical configuration. RECOVERY CAPACITIES TEMPERATURE RISE - DEGREES F - ELEMENT GALLONS PER HOUR WATTAGE 40 F 60 F 80 F 100 F 120 F 140 F 1, , , , , ,

26 20 STORAGE TANKS Standard Features: Porcelain enamel lined tank Heavy duty anode rods ASME construction available 2" of rigid foam insulation Baked enamel steel jacket 5 year limited warranty These models exceed the minimum efficiency requirements of ASHRAE Standard 90.1 (Part of the Federally mandated Energy Policy Act (EPact).

27 DIMENSIONAL INFORMATION (DIMENSIONS SHOWN IN INCHES) WATER CONNECTIONS APPROX. MODEL TOP FRONT WEIGHT (LBS.) NUMBER A B C D OUTLET SIDE STANDARD ASME ST80(A) 58-5/ / /16 6-3/ lbs. 260 lbs. ST120(A) 59-1/4 28-1/4 11-1/16 4-1/ lbs. 340 lbs. ST175(A) 67-1/4 32-1/4 12-9/16 5-9/16 2-1/2 2-1/2 600 lbs. 600 lbs. HOT OUTLET OPENING 1" NPT T&P OPENING HOT B 3/4" NPT THERMOMETER OPENING TANK INFORMATION TANK MAXIMUM WORKING MODEL CAPACITY PRESSURE NUMBER (GALLONS) STD. ASME ST80(A) PSI 125 PSI ST120(A) PSI 160 PSI ST175(A) PSI 150 PSI 3/4" NPT AQUASTAT OPENING CIRCULATING CONNECTIONS D C A 21

28 RHEEM/RUUD TO PERFECT FIT CONVERSION CHART RHEEM/RUUD PERFECT FIT Model Btu/Hr or kw Gal Model Btu/Hr or kw Gal Perfect Fit Gas Products introduced 8/96. G60-50N 60, T60-50N 60, GPV75-75E 75, TPV75-75E 75, G75-75N 75, T75-75N 75, G100-75(N) 75, T100-75(N) 75, G , T , G , T , G , T , G , T , G , T , G , T , G , T , G , T , G72-250(A) 250, T72-250(A) 250, G (A) 250, T (A) 250, G (A) 270, T (A) 270, G72-300(A) 300, T72-300(A) 300, G85-300(A) 300, T85-300(A) 300, G65-360(A) 360, T65-360(A) 360,

29 G65-400(A) 399, T65-400(A) 399, G85-400(A) 399, T85-400(A) 399, G (A) 399, T (A) 399, Electric - Point-of-Use and Light Duty Products EGSP2 1.5 Max 2.5 TEGSP2 1.5 Max 2.5 EGSP6 6 Max 6 TEGSP6 6 Max 6 EGSP10 6 Max 10 TEGSP10 6 Max 10 EGSP15 6 Max 15 TEGSP15 6 Max 15 EGSP20 6 Max 20 TEGSP20 6 Max 20 EGSP30 6 Max 30 TEGSP30 6 Max 30 ELDS30 12 Max 30 TELDS30 12 Max 30 ELDS40 12 Max 40 TELDS40 12 Max 40 ELD30 9 Max 30 TELD30 9 Max 30 ELD40 12 Max 40 TELD40 12 Max 40 ELD52 12 Max 50 TELD52 12 Max 50 ELDS52 12 Max 50 TELDS52 12 Max 50 ELD80 12 Max 80 TELD80 12 Max 80 ELD Max 120 TELD Max 120 Electric - Heavy Duty Products ES50/E50(A) 6 to TES50/TE50(A) 6 to ES85/E85(A) 6 to TES85/TE85(A) 6 to ES120/E120(A) 6 to TES120/TE120(A) 6 to Electric - Instantaneous/Booster Product E10 6 to TE10 6 to

30 A.O. SMITH TO PERFECT FIT CONVERSION CHART A.O. SMITH PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height Gas Tank Type Models BTR , /4" 69-3/4" T , /4" 65-1/2" BTR , /4" 73" T , /4" 68-13/16" BTR , /4" 67-1/2" T , /4" 68-13/16" BTR , /4" 74" T , /4" 73-1/16" BTR , /4" 74" T , /4" 73-1/16" BTR , /4" 67-1/2" T , /4" 68-13/16" BTR-200(A) 199, /4" 72" T (A) 199, /4" 73-1/16" BTR-250(A) 250, /4" 72" T (A) 250, /4" 73-1/4" BTR-251(A) 251, /4" 75" T72-250(A) 250, /4" 71-1/16" BTR-275(A) 275, /4" 72" T (A) 270, /4" 73-7/8" BTR-305(A) 305, /4" 75" T72-300(A) 300, /4" 71" BTR-365(A) 365, /4" 79-1/2" T65-360(A) 360, /4" 70-11/16" BTR-400(A) 399, /4" 75-1/2" T (A) 399, /4" 76" 24

31 Conservationist/Damper Gas Tank Type Models BT-80 75, /2" 61-1/8" T75-75N 75, /4" 64-3/8" BT , /2" 68-3/4" T100-75(N) 75, /4" 67-7/8" NOTE: (A) denotes ASME construction available. 25

32 A.O. SMITH TO PERFECT FIT CONVERSION CHART A.O. SMITH PERFECT FIT Model Btu/Hr. Gal Model Btu/Hr. Gal Storage Tank Systems (**Unfired Storage Vessels) TJ-80(A) ** 80 ST80(A) ** 80 TJV-120M ** 120 ST120 ** 115 TJV-120A ** 120 ST120A ** 115 TJV-200 ** 200 ST175A **

33 27

34 A.O. SMITH TO PERFECT FIT CONVERSION CHART A.O. SMITH PERFECT FIT Model kw Gal Model kw Gal Electric Light Duty and Point-of-Use Products DEL-6 S 2.5 Max 6 TEGSP6 6 Max 6 DEL-10 S 6 Max 10 TEGSP10 6 Max 10 DEL-15 S 6 Max 15 TEGSP15 6 Max 15 DEL-20 S 6 Max 20 TEGSP20 6 Max 20 DEN/DEL-30 D 12 Max 30 TELD/TELDS30 4.5/12 Max 30 DEN/DEL-40 D 12 Max 40 TELD/TELDS40 12 Max 40 DEN/DEL-52 D 12 Max 50 TELD/TELDS52 12 Max 50 DEN-66 D 12 Max 66 TELD66 12 Max 65 DEN-80 D 12 Max 80 TELD80 12 Max 80 DEN-120 D 12 Max 119 TELD Max

35 Electric Heavy Duty Products DRE/DVE-52 6 to TES50/TE50 6 to DRE/DVE-80 6 to TES85/TE85 6 to DRE/DVE to TES120/TE120 6 to DSE-10 3 to 6 10 TE12A 3 to 9 13 DSE-20 3 to TE20A 3 to DSE-30 3 to TE30A 3 to DSE-40 3 to TE40A 3 to DSE-40 6 to TE50A 6 to DSE-50 6 to TE50A 6 to DSE-65 6 to TE85A 6 to DSE-80 6 to TE85A 6 to DSE to TE120A 6 to DSE to TE120A 6 to NOTE: DRE, DEL, DEN use surface mounted thermostats. DVE, DSE use immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. Electric Instantaneous/Booster Products CMC-5 6 to 54 5 TE10 6 to SU-20 6 to TE10 6 to

36 30 AMERICAN TO PERFECT FIT CONVERSION CHART AMERICAN PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height DCG32 Series 75T125-5N 125, /4" 72" T , /4" 65-1/2" 36S145-6N 145, /4" 50-5/8" T , /4" 49-1/4" 75T160-6N 160, /4" 72" T , /4" 68-13/16" 80T180-6N 180, /4" 71-7/8" T , /4" 68-13/16" 80T199-6N 199, /4" 71-7/8" T , /4" 68-13/16" 98T199-6N 199, /4" 82-7/8" T , /4" 76-5/16" 80T250-6N(A) 250, /4" 71-7/8" T72-250(A) 250, /4" 71-1/16" 98T250-6N(A) 250, /4" 82-7/8" T (A) 250, /4" 73-1/4" 75T300-7N(A) 300, /4" 74-1/2" T72-300(A) 300, /4" 71" 65T370-8N(A) 370, /4" 73-3/8" T65-360(A) 360, /4" 70-11/16" 65T399-8N(A) 399, /4" 73-3/8" T65-400(A) 399, /4" 70-11/16" 80T425-10N(A) 425, /4" 83" T85-400(A) 399, /4" 78-13/16"

37 DCG31 Series 73T140-5N 140, /4" 74-1/4" T , /4' 68-13/16" 76T180-6N 180, /4" 74-1/4" T , /4" 68-13/16" 85S199-6N 199, /4" 69" T , /4" 68-13/16" 100T199-6N 199, /4" 78" T , /4" 76-5/16" 100S199-6N 199, /4" 74-1/2" T , //4" 73-1/16" 100S250-6N(A) 250, /4" 74-1/2" T (A) 250, /4" 73-1/4" 100S270-6N(A) 270, /4" 74-1/2" T (A) 270, /4" 73-7/8" 100S300-7N(A) 300, /4" 74-1/2" T (A) 310, /4" 75" 80L399-8N(A) 399, /4" 71" T65-400(A) 399, /4" 70-11/16" PVCG32 Series 50T63-3NV 63, " 70" TPV75-75E 75, /4" 68" 75T80-3NV 80, " 70-1/2" TPV75-75E 75, /4" 68" CG32 Series 75T75-4NV 74, " 63-1/2" T75-75N 70, /4" 64-3/8" 100T88-4NV 88, /4" 68-11/16" T100-75(N) 75, /4" 67-7/8" 31

38 AMERICAN TO PERFECT FIT CONVERSION CHART AMERICAN PERFECT FIT Model kw Gal Model kw Gal Electric Light Duty and Point-of-Use Products LDCE30D 12 Max 30 TELDS30 12 Max 30 LDCE40D 12 Max 40 TELD40 12 Max 40 LDCE50D 12 Max 50 TELD52 12 Max 50 LDCE65D 12 Max 65 TELD66 12 Max 65 LDCE80D 12 Max 80 TELD80 12 Max 80 LDCE119D 12 Max 119 TELD Max

39 Electric Heavy Duty Products ITCE/STCE-33 9 to TES50/TE50 6 to ITCE/STCE-33 9 to TES85/TE85 6 to ITCE/STCE-33 9 to TES120/TE120 6 to AITCE/ASTCE-33 9 to TE120A 6 to NOTE: STCE uses surface mounted thermostats. ITCE uses immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. Storage Tank Systems (**Unfired Storage Vessels) CST52-80T ** 80 ST80 ** 80 CST52-120T ** 119 ST120 ** 115 ACST52-120T ** 120 ST120A ** 115 ACST52-200T ** 200 ST175A **

40 BRADFORD WHITE TO PERFECT FIT CONVERSION CHART 34 BRADFORD WHITE PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height T&S Series 75T-80 80, " 63-3/4" T75-75N 75, /4" 64-3/8" 100T-88 88, /4" 68-5/8" T , /4" 67-7/8" D-75T-125-3N 125, /4" 72-1/8" T , /4" 65-1/2" D-38T , /4" 51" T , /4" 49-1/4" D-75T-160-3N 160, /4" 72-1/8" T , /4" 68-13/16" D-80T-180-3N 180, /4" 71-7/8" T , /4" 68-13/16" D-80T-199-3N 199, /4" 71-7/8" T , /4" 68-13/16" D-100T-199-3N 199, /4" 83" T , /4" 76-5/16" D-100S-199-3N 199, /4" 74-1/4" T , /4" 73-1/16" D-80T-250-3N(A) 250, /4" 71-7/8" T72-250(A) 250, /4" 71-1/16" D-100S-250-3N(A) 250, /4" 74-1/4" T (A) 250, /4" 73-1/4" D-100T-250-3N(A) 250, /4" 83" T (A) 250, /4" 73-1/4" D-100S-270-3N(A) 270, /4" 74-1/4" T (A) 270, /4" 73-7/8" D-75T-300-3N(A) 300, /4" 74" T72-300(A) 300, /4" 71" D-65T-370-3N(A) 370, /4" 74" T65-360(A) 360, /4" 70-11/16"

41 D-65T-399-3N(A) 399, /4" 74" T65-400(A) 399, /4" 70-11/16" D-80S-399-3N(A) 399, /4" 77-1/4" T85-400(A) 399, /4" 78-13/16" L Series D-100L , /4" 74-3/4" T , /4" 73-1/16" D-100L-250(A) 250, /4" 74-3/4" T (A) 250, /4" 73-1/4" D-100L-270(A) 270, /4" 74-3/4" T (A) 270, /4" 73-7/8" D-100L-300(A) 300, /4" 75-1/2" T (A) 310, /4" 75" D-80L-399(A) 399, /4" 71" T65-400(A) 399, /4" 70-11/16" TW & PDV Series TW50T-65-3N 65, " 66-1/4" TPV75-75E 75, /4" 68" TW75T-75-3N 75, " 69-1/2" TPV75-75E 75, /4" 68" 35

42 BRADFORD WHITE TO PERFECT FIT CONVERSION CHART BRADFORD WHITE PERFECT FIT Model Btu/Hr. Gal Model Btu/Hr. Gal Storage Tank Systems (**Unfired Storage Vessels) M-3-ST80R5 ** 80 ST80(A) ** 80 M-3-ST120R5 ** 119 ST120(A) ** 115 M-3-ST120R5(A) ** 119 ST120A ** 115 M-3-ST200R5(A) ** 200 ST175A **

43 37

44 BRADFORD WHITE TO PERFECT FIT CONVERSION CHART BRADFORD WHITE PERFECT FIT Model kw Gal Model kw Gal Electric Heavy Duty Products 12A-KW-3 3 to 9 12 TE12A 3 to A-KW-3 3 to TE20A 3 to A-KW-3 3 to TE30A 3 to A-KW-3 3 to TE40A 3 to M-II-50SF/CF 6 to TES/TE50(A) 6 to M-II-80SF/CF 6 to TES/TE85(A) 6 to M-II-120SF/CF(A) 6 to TES/TE120(A) 6 to NOTE: SF uses surface mounted thermostats. CF uses immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. NOTE: (A) refers to ASME availability. Limited to TE products. Typical Perfect Fit Configuration: TE50-(kW) or TES50-(kW) If kw = 36; Example: TE50-36 or TES Electric Instantaneous/Booster Products L-I-6-3CF 6 to 58 5 TE10 6 to Typical Bradford White Configuration: L-I-6-(kW)-3CF Example: L-I CF

45 Electric Light Duty and Point-of-Use Products LD-6U3-1CO Max 6 TEGSP6 6 Max 6 LD-12U3-1C Max 12 TEGSP10 6 Max 10 LD-20U3-1C015 6 Max 19 TEGSP20 6 Max 20 LD-30U3-1C015 6 Max 30 TEGSP30 6 Max 30 LD-30L3-3C Max 30 TELDS30 12 Max 30 LD-40L3-3CO45 12 Max 40 TELDS40 12 Max 40 LD-50L3-3C Max 50 TELDS52 12 Max 50 LD-WH6U3-1C Max 6 TEGSP6 6 Max 6 LD-WH12U3-1C Max 12 TEGSP10 6 Max 10 LD-WH20L3-1C015 6 Max 19 TEGSP20 6 Max 20 LD-WH30L3-1C015 6 Max 30 TEGSP30 6 Max 30 LD-40S3-3C Max 40 TELD40 12 Max 40 LD-50S3-3CO45 12 Max 50 TELD52 12 Max 50 LD-65R3-3C Max 65 TELD66 12 Max 65 LD-80R3-3C Max 80 TELD80 12 Max 80 LC-120R3-3C Max 120 TELD Max

46 LOCHINVAR TO PERFECT FIT CONVERSION CHART 40 LOCHINVAR PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height CNR Series CNR , " 63-3/4" T75-75N 75, /4" 64-3/8" CNR , /4" 68-5/8" T100-75(N) 75, /4" 67-7/8" CNR DF9 145, /4' 50-5/8" T , /4" 49-1/4" CNR DF9 125, /4" 72-1/8" T , /4" 65-1/2" CNR DF9 160, /4" 72-1/8" T , /4" 68-13/16" CNR DF9 180, /4" 71-7/8" T , /4" 68-13/16" CNR DF9 199, /4" 71-7/8" T , /4" 68-13/16" CNR DF9 199, /4" 83" T , /4" 76-5/16" CNR DF9 199, /4" 74-1/4" T , /4" 73-1/16" CNR DF9 250, /4" 83" T , /4" 73-1/4" CNR DF9 300, /4" 74" T , /4" 71" CNR DF9 370, /4" 74" T , /4" 70-11/16" CNR DF9 399, /4" 77-1/4" T , /4" 78-13/16"

47 CNA (ASME) Series CNA DF9 250, /4" 83" T (A) 250, /4" 73-1/4" CNA DF9 300, /4" 74" T72-300(A) 300, /4" 71" CNA DF9 370, /4" 74" T65-360(A) 360, /4" 70-11/16" CNA DF9 399, /4" 77-1/4" T85-400(A) 399, /4" 78-13/16" 41

48 LOCHINVAR TO PERFECT FIT CONVERSION CHART LOCHINVAR PERFECT FIT Model Btu/Hr. Gal Model Btu/Hr. Gal Gas Hot Water Supply Heaters Copper-Pak Products CPN , T , CPN , T , Storage Tank Systems (**Unfired Storage Vessels) RJS080 ** 78 ST80 ** 80 RJS085 ** 85 ST80 ** 80 RJS120 ** 119 ST120 ** 115 RJA120 ** 119 ST120A ** 115

49 43

50 LOCHINVAR TO PERFECT FIT CONVERSION CHART 44 LOCHINVAR PERFECT FIT Model kw Gal Model kw Gal Electric Light Duty and Point-of-Use Products ETX/ETW030KK 12 Max 30 TELD30 9 Max 30 ESX/ESW030KK 12 Max 30 TELDS30 12 Max 30 ETX/ETW040KK 12 Max 40 TELD40 12 Max 40 ESX/ESW040KK 12 Max 40 TELDS40 12 Max 40 ETX/ETW052KK 12 Max 50 TELD52 12 Max 50 ESX/ESW050KK 12 Max 50 TELDS52 12 Max 50 ETX/ETW066KK 12 Max 65 TELD66 12 Max 65 ETX/ETW082KK 12 Max 80 TELD80 12 Max 80 ETX/ETW120KK 12 Max 120 TELD Max 120 NOTE: ETX/ESX refers to 480 volt, 3 phase products. ETW/ESW refers to 277 volt, 1 phase products. NOTE: TELD/TELDS models are available in 208, 240, 277 or 480 volt (1 or 3 phase) configurations.

51 Electric Heavy Duty Products HS*(kW) to TES50 6 to HS*(kW) to TES85 6 to HS*(kW)-120(A) 9 to TES120 6 to HC*(kW) to TE50(A) 6 to HC*(kW) to TE85(A) 6 to HC*(kW)-120(A) 9 to TE120(A) 6 to Electric Instantaneous/Booster Products SB*-(kW) 6 to 58 5 TE10 6 to Note: * Refers to voltage/phase: A 240 Volt, 1 Phase B 240 Volt, 3 Phase J 208 Volt, 1 Phase K 208 Volt, 3 Phase P 240 Volt, 1/3 Phase T 208 Volt, 1/3 Phase W 277 Volt, 1 Phase X 480 Volt, 3 Phase R Special - Must Specify 45

52 STATE TO PERFECT FIT CONVERSION CHART 46 STATE PERFECT FIT Model Btu/Hr. Gal Dia. Height Model Btu/Hr. Gal Dia. Height Gas Water Heaters SBT75-75NE 75, /4 67-1/2" T75-75N 75, /4" 64-3/8" SBT100-75NE 75, " 72" T100-75(N) 75, /4" 67-7/8" SBF75-120NE 120, " 76-3/4" T , /4" 65-1/2" SBF75-140NE 140, " 76-3/4" T , /4" 68-13/16" SBF30-150NE 150, " 49" T , /4" 49-1/4" SBF80-180NE 180, " 73-1/2" T , /4" 68-13/16" SBF30-199NE 199, " 49" T , /4" 49-1/4" SBF80-199NE 199, " 73-1/2" T , /4" 68-13/16" SBF NES 199, /4" 71" T , /4" 73-1/16" SBF NET 199, " 83" T , /4" 76-5/16" SBF30-199NE 199, " 49" T , /4" 68-13/16" SBF30-225NE(A) 225, " 49" T72-250(A) 250, /4" 71-1/16" SBF75-250NE(A) 250, " 75" T72-250(A) 250, /4" 71-1/16"

53 SBF NES(A) 260, /4" 74" T (A) 270, /4" 73-7/8" SBF NET(A) 260, " 84" T (A) 270, /4" 73-7/8" SBF75-300NE(A) 300, " 75-1/2" T72-300(A) 300, /4" 71" SBF70-360NE(A) 360, " 72-3/4" T65-360(A) 360, //4" 70-11/16" SBF NE(A) 399, /4" 77" T (A) 399, /4" 76" NOTE: (A) denotes ASME construction available. 47

54 STATE TO PERFECT FIT CONVERSION CHART 48 STATE PERFECT FIT Model kw Gal Model kw Gal Electric Point-of-Use and Light Duty Products CPE 6 10MSA 3.8 Max 6 TEGSP6 6 Max 6 CPE 10 10MSA 6 Max 10 TEGSP10 6 Max 10 CPE 17 10MSA 6 Max 17 TEGSP15 6 Max 15 CPE 20 10MSA 6 Max 20 TEGSP20 6 Max 20 CPE 30 10MSA 12 Max 30 TEGSP30 6 Max 30 CPE 40 20LSA 12 Max 40 TELDS40 12 Max 40 CPE 50 20LSA 12 Max 47 TELDS52 12 Max 50 CPE 30 20RTA 12 Max 30 TELD30 9 Max 30 CPE 40 20RTA 12 Max 40 TELD40 12 Max 40 CPE 52 20RTA 12 Max 50 TELD50 12 Max 50 CPE 66 20RTA 12 Max 66 TELD66 12 Max 65 CPE 82 20RTA 12 Max 82 TELD80 12 Max 80 CPE RTA 12 Max 119 TELD Max 120

55 Electric Heavy Duty Products SB to 9 10 TE12A 3 to 9 12 SB to TE20A 3 to SB to TE30A 3 to SB to TE40A 3 to SB6-52-(kW)**(A) 6 to TES50/TE50(A) 6 to SB6-82-(kW)**(A) 6 to TES85/TE85(A) 6 to SB6-120-(kW)**(A) 6 to TES120/TE120(A) 6 to NOTE: ** Refers to SFE which uses surface mounted thermostats. IFE uses immersion thermostats. NOTE: TES models use surface mounted thermostats. TE models use immersion thermostats. Storage Tank Systems (**Unfired Storage Vessels) PV-82-0ORT(A) ** 82 ST80(A) ** 80 PV-120-0ORT(A) ** 119 ST120(A) ** 115 PV-200-0ORTA ** 200 ST175A **

56 Customer Service Division Office Customer Service Warranty, Parts Fax International Sales Fax Technical Service ( ) HEATER3 Website Perfect Fit Commercial A DIVISION OF RHEEM WATER HEATING Rheem Heating, Cooling & Water Heating 101 Bell Road Montgomery, AL In keeping with its policy of continuous progress and product improvement, Perfect Fit reserves the right to make changes without notice. Printed in U.S.A. 07/08 WP TX-338 Rev HEATER3