Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4"

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN100 and ASME Standard LEA, LFA and LLA ½" to 4""

Transcription

1 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without notice. Copyright 216 TI-S24-7 CH Issue 5 Spira-trol TM Two-port Control Valves EN Standard LE, LF and LL DN15 to DN1 and SME Standard LE, LF and LL ½" to 4" Description Spira-trol TM is a range of two-port single seat globe valves with cage retained seats conforming to EN and SME standard. These valves are available in three body materials in sizes ranging from DN15 to DN1 (½" to 4"). When used in conjunction with a pneumatic or electric linear actuator they provide characterized modulating or on / off control. LE valve with PTFE packing LE valve with Bellows seal Sizes and pipe connections Body material Connections Type Size range BSP LE31 DN15, DN2, DN25, DN32, DN4 and DN5 Screwed NPT LE31 ½", ¾", 1", 1¼", 1½" and 2" Cast iron EN 192 PN16, JIS / KS 1 LE33 DN15, DN2, DN25, DN32, DN4, DN5, DN65, DN8 and DN1 Flanged SME class 125 1", 1½", 2", 2½", 3" and 4" LE33 JIS / KS 1 ½", ¾", 1", 1¼", 1½", 2", 2½", 3" and 4" EN 192 PN16, JIS / KS 1 LE43 DN15, DN2, DN25, DN32, DN4, DN5, DN65, DN8 and DN1 Carbon steel Flanged SME class 15 ½", ¾", 1", 1½", 2", 2½", 3" and 4" LE43 JIS / KS 1 ½", ¾", 1", 1¼", 1½", 2", 2½", 3" and 4" EN 192 PN16, JIS / KS 1 LE63 DN15, DN2, DN25, DN32, DN4, DN5, DN65, DN8 and DN1 Stainless steel Flanged SME class 15 ½", ¾", 1", 1½", 2", 2½", 3" and 4" LE63 JIS / KS 1 ½", ¾", 1", 1¼", 1½", 2", 2½", 3" and 4" Page 1 of 18

2 Spira-trol valve characteristic - options: LE and LE Equal percentage (E) - Suitable for most modulating process control applications providing good control at all flowrates. LF and LF LL and LL Fast opening (F) - For on / off applications only. Linear (L) - Primarily for liquid flow control where the differential pressures across the valve is constant. Important note: Throughout this document, reference has been made to the standard LE or LE control valve. With the exception of trim type, the LE, LE, LF, LF, LL and LL control valves are identical. Spira-trol valve options: PTFE chevron seals Standard Stem sealing Seating Bellows / graphite secondary seals (D) Graphite packing Metal-to-metal Soft seating Hard facing Zero emissions and high temperature applications High temperature applications 431 stainless steel - standard 316L stainless steel Up to 2 C (392 F) - PTFE for Class VI shut-off Up to 25 C (482 F) - PEEK for Class VI shut-off 316L stainless steel with Stellite 6 facing - for more arduous applications Bonnet type Trim Standard bonnet Extended bonnet for large pipe lagging or hot / cold applications Standard trim Low noise and anti-cavitation trim (see TI-S24-59) Spira-trol valves are compatible with the following actuators and positioners: Electric EL35, EL72, EL5 and EL6 series Pneumatic PN1, PN9 and PN2 series PP5 (pneumatic) or EP5 (electropneumatic) Positioners ISP5 (intrinsically safe electropneumatic) SP2is, SP4 and SP5 (microprocessor based electropneumatic) SP3 (digital communications) Refer to the relevant Technical Information sheet for further details. Standards Designed in accordance with EN This product fully complies with the requirements of the European Pressure Equipment Directive 97 / 23 / EC and carries the mark when so required. Certification This product is available with certification to EN Note: ll certification / inspection requirements must be stated at the time of order placement. Page 2 of 18

3 Technical data Plug design Parabolic Leakage Metal-to-metal Soft seal Balanced and Unbalanced Unbalanced Balanced Unbalanced Class IV (optional) Class V Class IV Class VI Equal 5:1 Rangeability Travel Linear 3:1 Fast 1:1 DN15 - DN5 (½" - 2") 2 mm (¾") DN65 - DN1 (2½" - 4") 3 mm (1 ") Typical flow characteristic s 1 Fast opening Flow % 5 Linear Equal percentage 5 1 Valve opening % Page 3 of 18

4 Materials Body material No. Part Type Material LE31 and LE33 SG iron EN 1563 : EN-GJS Body LE31 and LE33 Cast iron STM 126B Cast iron Carbon steel Stainless steel ll versions 2 Bonnet 2a 1 Body Bonnet extension 2 Bonnet 2a 1 Body * Graphite packing High temperature packing Bonnet extension 2 Bonnet DN15 - DN5 (½" - 2") DN65 - DN1 (2½" - 4") DN15 - DN5 (½" - 2") DN65 - DN1 (2½" - 4") LE31 and LE33 SG iron EN 1563 : EN-GJS-4-18 LE31 and LE33 Ductile iron STM 395 LE31 and LE33 Cast iron EN 1561 : EN-GJL-25 LE31 and LE33 Ductile iron STM 395 LE31 and LE33 EN 1213 GP24GH+N (1.619N) Carbon steel LE31 and LE33 STM 216 WCB or 15N LE43 Carbon steel EN 1213 GP24GH+N (1.619N) LE43 Cast steel STM 216 WCB LE43 Carbon steel EN 1273 P25GH (1.46) LE43 Carbon steel STM 15N LE43 Steel EN1213 GP24GH+N (1.619N) LE43 Cast steel STM 216 WCB LE43 and LE43 EN 1213 GP24GH+N (1.619N) Carbon steel STM 216 WCB or 15N LE63 EN Stainless steel LE63 STM 351 CF8M LE63 EN Stainless steel LE63 STM 351 CF8M 2a Bonnet extension LE63 and LE63 Stainless steel 2b Bellows ll versions Stainless steel 2c Extended bonnet LE63 and LE63 Stainless steel 351 CF8M and EN ll others Carbon steel 216 WCB and EN N 3 Stem lock-nut ll versions Stainless steel 4 Bonnet gasket ll versions Reinforced exfoliated graphite 5 Seat retainer ll versions Stainless steel 6 Valve seat ring ll versions Stainless steel, except FULL PEEK soft seat 7 Seat gasket ll versions Reinforced exfoliated graphite 8 Valve plug and stem ll versions Stainless steel 9 * Lower stem guide ll versions Glass filled PTFE, except Nitronic bush option 1 * Lower stem wiper ll versions PTFE 11 * Packing guard washer ll versions Stainless steel 12 * Spring ll versions Stainless steel 13 Packing spacer ll versions Stainless steel 14 * Chevron packing set ll versions PTFE 15 * Outer 'O' ring ll versions Viton 16 * Upper stem guide ll versions Glass filled PTFE, except Nitronic bush option 17 * Inner 'O' ring ll versions Viton 18 Gland nut ll versions Stainless steel 19 Scraper ring ll versions PTFE 2 ctuator clamp nut ll versions Plated carbon steel 21 Bellows assembly ll versions Stainless steel 22 Bonnet extension gasket ll versions Reinforced exfoliated graphite 23 Top plate (bonnet extension only) ll versions Stainless steel 24 Lower spindle bearing housing ll versions Stainless steel 25 Lower spindle bearing ll versions Stainless steel 26 Spindle lock and anti-rotation nut ll versions Stainless steel 27 Bonnets nuts LE63 Stainless steel STM 194 Gr. 8M ll others Steel STM 194 Gr. 2H Set screws LE63 Stainless steel 2-7 ll others Steel Standard bonnet studs LE63 Stainless steel STM 193 Gr. B8 M2 ll others Steel STM 193 Gr. B Lower and upper stem guide ll versions Stellite 6 14 Grafoil packing ll versions Graphite rings 1, 11, 12, 15, 17, 19 Not used Page 4 of 18

5 Bonnet with graphite packing LE valve with PTFE packing 14 LE valve with extended bonnet (E) 2a 2b 2c Extended bonnet (E) 22 LE valve with bellows seal (D) Page 5 of 18

6 Kv values Valve size Standard trim Microflute Full port trim 1 trim 2 trim 3 trim 4 trim 5 DN15 (½") DN2 (¾") DN25 (1") DN32 (1¼") DN4 (1½") DN5 (2") DN65 (2½") DN8 (3") Equal % Linear Fast opening Equal % Linear Equal % Linear Equal % Linear Equal % Linear Equal % Linear DN1 (4") Notes: - Special Kv on request - For low noise and anticavitation Kv please see TI-S24-59 Cv (US) values Cv (US) = Cv (UK) x 1.29 Valve size Standard trim Microflute Full port trim 1 trim 2 trim 3 trim 4 trim 5 DN15 (½") DN2 (¾") DN25 (1") DN32 (1¼") DN4 (1½") DN5 (2") DN65 (2½") DN8 (3") DN1 (4") Equal % Linear Fast opening Equal % Linear Equal % Linear Equal % Linear Equal % Linear Equal % Linear Notes: - Special Cv on request - For low noise and anticavitation Cv please see TI-S24-59 Page 6 of 18

7 Pressure / temperature limits - LE31 and LE33 cast iron valve body Screwed BSP Flanged EN 192 PN Note: When the process fluid temperature is sub-zero and the ambient temperature is below +5 C, the external moving parts of the valve and actuator must be heat traced to maintain normal operation. Flanged JIS / KS 1 The product must not be used in this region. High temperature graphite packing is required for use in this region. Note: Soft seated valves cannot be used in this region. PTFE soft seated valves are limited to a maximum operating temperature of 2 C. Body design conditions PN16 Maximum design pressure 16 bar 12 C Maximum design temperature bar g Minimum design temperature -1 C Standard packing PTFE chevron - Option P or N 25 C PTFE soft seat - Option G 2 C Maximum operating temperature See the Spira-trol TM selection guide on page 18 for the full list of available options PEEK soft seat - Option K or P 25 C Graphite packing - Option H 3 C Extended bonnet with PTFE chevron - Option E 25 C Extended bonnet with graphite packing - Option E 3 C Bellows - Option D 3 C Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco -1 C Maximum differential pressures See relevant actuator Technical Information sheet. Maximum cold hydraulic test pressure of: 24 bar g Page 7 of 18

8 Pressure / temperature limits - LE43 carbon steel valve body Flanged EN 192 PN Please note - Bellows sealed valves (Option D) are limited to -. Note: When the process fluid temperature is sub-zero and the ambient temperature is below +5 C, the external moving parts of the valve and actuator must be heat traced to maintain normal operation. Flanged JIS / KS The product must not be used in this region. High temperature graphite packing is required for use in this region. Note: Soft seated valves cannot be used in this region. PTFE soft seated valves are limited to a maximum operating temperature of 2 C. Body design conditions PN16 Maximum design pressure 16 bar 5 C Maximum design temperature bar g Minimum design temperature -1 C Standard packing PTFE chevron - Option P or N 25 C PTFE soft seat - Option G 2 C Maximum operating temperature See the Spira-trol TM selection guide on page 18 for the full list of available options PEEK soft seat - Option K or P 25 C Graphite packing - Option H 4 C Extended bonnet with PTFE chevron - Option E 25 C Extended bonnet with graphite packing - Option E 4 C Bellows ( - on the LE43 chart) - Option D 3 C Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco -1 C Maximum differential pressures See relevant actuator Technical Information sheet. Maximum cold hydraulic test pressure of: 24 bar g For valve operating above 3 C extended bonnet is recommended for actuator suitability. Page 8 of 18

9 Pressure / temperature limits - LE63 stainless steel valve body Flanged EN 192 PN PTFE -28 Graphite Please note - Bellows sealed valves (Option D) are limited to -. Note: When the process fluid temperature is sub-zero and the ambient temperature is below +5 C, the external moving parts of the valve and actuator must be heat traced to maintain normal operation. Flanged JIS / KS The product must not be used in this region. High temperature graphite packing is required for use in this region. Note: Soft seated valves cannot be used in this region. PTFE soft seated valves are limited to a maximum operating temperature of 2 C. Body design conditions PN16 Maximum design pressure 16 bar 5 C Maximum design temperature bar g Minimum design temperature -5 C Standard packing PTFE chevron - Option P or N 25 C PTFE soft seat - Option G 2 C Maximum operating temperature See the Spira-trol TM selection guide on page 18 for the full list of available options PEEK soft seat - Option K or P 25 C Graphite packing - Option H 4 C Extended bonnet with PTFE chevron - Option E 25 C Extended bonnet with graphite packing - Option E 4 C Bellows ( - on the LE63 chart) - Option D 3 C Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco PTFE packing -28 C Graphite packing -5 C Maximum differential pressures See relevant actuator Technical Information sheet. Maximum cold hydraulic test pressure of: 24 bar g For valve operating above 3 C extended bonnet is recommended for actuator suitability. Page 9 of 18

10 Pressure/temperature limits - LE31 and LE33 cast iron valve body Screwed NPT Flanged SME class 125 Pressure psi g Temperature F Note: When the process fluid temperature is sub-zero and the ambient temperature is below +5 C (41 F), the external moving parts of the valve and actuator must be heat traced to maintain normal operation. Pressure psi g Flanged JIS / KS 1 Temperature F The product must not be used in this region. PTFE soft seated valves are limited to a maximum operating temperature of 2 C. Body design conditions SME 125 Maximum design pressure 13.7 bar 65 C (2 psi 15 F) Maximum design temperature bar g ( psi g) Minimum design temperature -28 C (-2 F) Standard packing PTFE chevron - Option P or N 232 C (45 F) PTFE soft seat - Option G 2 C (392 F) Maximum operating temperature See the Spira-trol TM selection guide on page 18 for the full list of available options PEEK soft seat - Option K or P 232 C (45 F) Graphite packing - Option H 232 C (45 F) Extended bonnet with PTFE chevron - Option E 232 C (45 F) Extended bonnet with graphite packing - Option E 232 C (45 F) Bellows - Option D 232 C (45 F) Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco -29 C (-2 F) Maximum differential pressures See relevant actuator Technical Information sheet. Maximum cold hydraulic test pressure of: 21 bar g (3 psi g) Page 1 of 18

11 Pressure/temperature limits - LE43 carbon steel valve body Flanged SME class 15 Pressure psi g Temperature F Please note - Bellows sealed valves (Option D) are limited to -. Note: When the process fluid temperature is sub-zero and the ambient temperature is below +5 C (41 F), the external moving parts of the valve and actuator must be heat traced to maintain normal operation. Flanged JIS / KS 1 Pressure psi g Temperature F The product must not be used in this region. High temperature graphite packing is required for use in this region. Note: Soft seated valves cannot be used in this region. PTFE soft seated valves are limited to a maximum operating temperature of 2 C (482 F). Body design conditions SME 15 Maximum design pressure 19.6 bar 38 C (285 psi 1 F) Maximum design temperature bar g (8 8 psi g) Minimum design temperature -29 C (-2 F) Standard packing PTFE chevron - Option P or N 25 C (482 F) PTFE soft seat - Option G 2 C (392 F) Maximum operating temperature See the Spira-trol TM selection guide on page 18 for the full list of available options PEEK soft seat - Option K or P 25 C (482 F) Graphite packing - Option H 425 C (8 F) Extended bonnet with PTFE chevron - Option E 25 C (482 F) Extended bonnet with graphite packing - Option E 425 C (8 F) Bellows ( - on the LE43 chart) - Option D 3 C (572 F) Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco -28 C (-2 F) Maximum differential pressures See relevant actuator Technical Information sheet. Maximum cold hydraulic test pressure of: 29.5 bar g (428 psi g) For valve operating above 572 F (3 C) extended bonnet is recommended for actuator suitability. Page 11 of 18

12 Pressure/temperature limits - LE63 stainless steel valve body Flanged SME class 15 PTFE -29 Graphite -5 Pressure psi g Temperature F Please note - Bellows sealed valves (Option D) are limited to -. Note: When the process fluid temperature is sub-zero and the ambient temperature is below +5 C (41 F), the external moving parts of the valve and actuator must be heat traced to maintain normal operation. Flanged JIS / KS 1 Pressure psi g Temperature F The product must not be used in this region. High temperature graphite packing is required for use in this region. Note: Soft seated valves cannot be used in this region. PTFE soft seated valves are limited to a maximum operating temperature of 2 C (482 F). Body design conditions SME 15 Maximum design pressure 19.6 bar 38 C (275 psi 1 F) Maximum design temperature bar g (1 2 psi g) Minimum design temperature -5 C (-58 F) Standard packing PTFE chevron - Option P or N 25 C (482 F) PTFE soft seat - Option G 2 C (392 F) Maximum operating temperature See the Spira-trol TM selection guide on page 18 for the full list of available options PEEK soft seat - Option K or P 25 C (482 F) Graphite packing - Option H 538 C (1 F) Extended bonnet with PTFE chevron - Option E 25 C (482 F) Extended bonnet with graphite packing - Option E 538 C (1 F) Bellows ( - on the LE63 chart) - Option D 3 C (572 F) Minimum operating temperature Note: For lower operating temperatures consult Spirax Sarco PTFE packing -28 C (-2 F) Graphite packing -5 C (-58 F) Maximum differential pressures See relevant actuator Technical Information sheet. Maximum cold hydraulic test pressure of: 28.4 bar g (413 psi g) For valve operating above 572 F (3 C) extended bonnet is recommended for actuator suitability. Page 12 of 18

13 Dimensions for the Spira-trol TM two-port control valve approximate in mm and (inches) Valve size Screwed Flanged BSP NPT LE valves LE valves B C B C 1 C1 1 C1 D E F PN16 JIS / KS 1 Thread Bellows LE33 LE43 seals LE63 Extended bonnet DN15 (½") (6½") 44 (1¾") 12 (4") (7¼") 12 (4") 237 (9") 336 (13.25") DN2 (¾") (6½") 44 (1¾") 12 (4") (7¼") 12 (4") 237 (9") 336 (13.25") DN25 (1") DN32 (1¼") (7¾") 216 (8½") 57 (2¼") 57 (2¼") 12 (4") 127 (5") (7¼") 222 (8¾") 12 (4") 127 (5") 69 (2¾") M8 237 (9") 267 (1½") 336 (13.25") 354 (13.94") DN4 (1½") (9¼") 63 (2½") 127 (5") (8¾") 127 (5") 267 (1½") 354 (13.94") DN5 (2") (1½") 76 (3") 127 (5") (1") 127 (5") 267 (1½") 354 (13.94") DN65 (2½") (1½") 2 (7 ") 368 (14½") 416 (16.38") DN8 (3") (11¾") 2 (7 ") 81 (3") M (14½") 416 (16.38") DN1 (4") (13¾") 216 (8½") 381 (15") 431 (17") E D E E D D F C C1 B Screwed version 1 Flanged version Bellows sealed or extended bonnet version Page 13 of 18

14 Weights for the Spira-trol TM two-port control valve approximate in kgs (and lbs) Valve size LE31 LE33 LE43 LE63 LE31 LE33 LE43 LE63 dditional bellows and Extended bonnet DN15 (½ ) (16) 7.3 (16) 7.3 (16) 7.3 (16) DN2 (¾ ) (16) 8.2 (18) 8.2 (18) 8.2 (18) 4.5 (1) DN25 (1 ) (22) 13.6 (3) 13.6 (3) 13.6 (3) DN32 (1¼ ) (25) 13.2 (29) 14.1 (31) 14.1 (31) DN4 (1½ ) (31) 14.1 (31) 16.3 (36) 16.3 (36) 5.5 (12) DN5 (2 ) (33) 17.2 (38) 17.2 (38) 17.2 (38) DN65 (2½ ) DN8 (3 ) (84) 41 (91) 35 (78) 4 (89) 35 (78) 4 (89) 1. (21) DN1 (4 ) (132) 56 (124) 56 (124) 13. (28) Page 14 of 18

15 Dimensions / weights for the PN actuator range approximate in mm and kgs (inches and lbs) ctuator range F G H J Weight With ctuator handwheel mm inches mm inches mm inches mm inches kg lbs kg lbs PN15 and PN " " PN16 and PN " " PN91E and variants 55 2 " ⅞" 17 6a" 225 8⅞" PN91R and variants 14 5½" PN92E and variants 55 2 " ⅞" 3 11⅞" 225 8⅞" PN92R and variants 14 5½" PN932E and variants 65 2 " ⅞" " 35 13¾" PN932R and variants 15 15⅞" PN933E and variants 65 2 " ⅜" " 35 13¾" PN933R and variants 15 15⅞" F J H ctuator G Dimensions / weights for the EL and EL actuator ranges approximate in mm and kgs (inches and lbs) ctuator range F G Weight mm inches mm inches kg lbs EL x 161 5¼" x 6¼" 242 9½" EL35 SE and SR 135 x 161 5¼" x 6¼" " EL72 series 1 4" ½" EL55 and EL " " EL51, EL52, EL53, EL62 and EL " " EL54 and EL " 49 19" EL56 and EL " 76 3" Page 15 of 18

16 Spare parts Spira-trol TM - L series The spare parts available are shown in solid outline. Parts drawn in a grey line are not supplied as spares. Note: When placing an order for spare parts please specify clearly the full product description as found on the label of the valve body, as this will ensure that the correct spare parts are supplied. vailable spares C1 C2 C ctuator clamping nut Gasket set (Non-bellows sealed) B, G Stem seal kits PTFE chevrons PTFE to Graphite conversion kit Graphite packing C C1 C2 Plug stem and seat kit (No gaskets supplied) PTFE or PEEK soft seat seal Stem packing and gasket Soft seat set D, E H B, G, C1 B, G, C B, G, C2 H1 D Specify if reduced trim. How to order spares lways order spares by using the description given in the column headed 'vailable spares', and state the size and type of valve including the full product description of the product. Example: 1 - PTFE stem seal kit for a Spirax Sarco Spira-trol TM DN25 LE43PTSUSS.2 Kvs 1 two-port control valve. How to fit spares Full fitting instructions are given in the Installation and Maintenance Instructions supplied with the spare. H1 Soft seat arrangement H B E G Page 16 of 18

17 Spare parts Spira-trol TM - L series with bellows seal The spare parts available are shown in solid outline. Parts drawn in grey line are not supplied as spares. Note: When placing an order for spare parts please specify clearly the full product description as found on the label of the valve body, as this will ensure that the correct spare parts are supplied. C vailable spares ctuator clamping nut Gasket set (Non-bellows sealed) B, G Stem seal kit Graphite packing and gasket set C2 Plug stem and seat kit (No gaskets supplied) Bellows seal assembly PTFE or PEEK soft seat seal Soft seat set D, E F H H1 Specify if reduced trim. How to order spares lways order spares by using the description given in the column headed 'vailable spares', and state the size and type of valve including the full product description of the product. Example: 1 - Plug stem and seat kit for a Spirax Sarco Spira-trol TM DN25 LE43PTSUSS.2 K vs 1 two-port control valve. How to fit spares Full fitting instructions are given in the Installation and Maintenance Instructions supplied with the spare. F Soft seat arrangement D3 B H E G Page 17 of 18

18 Spira-trol TM selection guide: Valve size EN standard = DN15, DN2, DN25, DN32, DN4, DN5, DN65, DN8 and DN1 SME standard = ½", ¾", 1", 1¼", 1½", 2", 2½", 3" and 4" DN25 Valve series L = L series 2-port control valve L E = Equal percentage Valve characteristic F = Fast opening L = Linear E = SME Flange type Blank = EN (PN) Blank Blank = under Flow T = over Blank 3 = Cast iron Connections 4 = Carbon steel 6 = Stainless steel 4 1 = Screwed Connections 3 = Flanged 3 P = PTFE Stem sealing H = Graphite N = PTFE / Nitronic bush (DN15 to DN5 only) D = Bellows P T = 431 stainless steel Seating G = PTFE soft seat S = 316L stainless steel W = 316L with stellite 6 facing P = Full PEEK K = PEEK soft seat T S = Standard trim Type of trim 1 = 1 stage anticavitation 2 = 2 stage anticavitation P1 = 1 stage low noise cage P2 = 2 stage low noise cage P3 = 3 stage low noise cage S U = Unbalanced Trim balancing B = Balanced (only available LE series) U S = Standard Bonnet type E = Extended S S = Standard bolting Bolting H = High temperature (only available LE series) S Blank = Standard finish Finish N = Nickel plated Blank Series 2 =.2.2 Kvs To be specified Kvs 1 Connection type To be specified Flanged PN16 Selection example: DN25 - L E 4 3 P T S U S S.2 - Kvs 1 - Flanged PN16 How to order Example: 1 off Spirax Sarco Spira-trol TM DN25 LE43PTSUSS.2 K vs 1 two-port control valve having flanged PN16 connections. Page 18 of 18

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"

Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½ to 12 Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

QLM and QLD Series Three-port Control Valves

QLM and QLD Series Three-port Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves

PN9000 Series Pneumatic Actuators for SPIRA-TROL K and L Series Control Valves Page 1 of 8 TI-P357-30 CH Issue 8 PN9000 Series Pneumatic s for SPIRA-TROL K and L Series Control Valves Description The PN9000 series actuators are a compact of linear actuators that are available in

More information

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves

TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 According to DIN and US standards Series 2 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 According to DIN US stards Application Mixing or flow-diverting valves designed for use in process engineering industrial

More information

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection

SV60 Safety Valve. Inlet sizes: DN20, DN25, DN32, DN40, DN50, DN65, DN80, DN100, DN125 and DN150. Valve type Inlet connection Outlet connection Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Two Port Valves. Pneumatically actuated

Two Port Valves. Pneumatically actuated Two Port Valves Pneumatically actuated Two Valve Ranges so many options... The Spirax Sarco range of control valves and pneumatic actuators are designed to give a comprehensive selection of valves for

More information

Series 250 Pneumatic Control Valve Type and Type Globe Valve Type 3254

Series 250 Pneumatic Control Valve Type and Type Globe Valve Type 3254 Series Pneumatic Control Valve Type 3254-1 and Type 3254-7 Globe Valve Type 3254 Application Control valve for process engineering applications with high industrial requirements, especially for high pressures

More information

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve

Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications

More information

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve

Baumann 24003 3 Way Bronze or Stainless Steel Control Valve Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising

More information

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244

Series 240 Pneumatic Control Valves Type and Type Three-way Valve Type 3244 Series 240 Pneumatic Control Valves Type 3244-1 Type 3244-7 Three-way Valve Type 3244 DIN ANSI versions Application Mixing or flow-diverting valves for use in process engineering industrial applications

More information

Baumann 24000 Little Scotty Bronze Control Valve

Baumann 24000 Little Scotty Bronze Control Valve 24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature

More information

MFP14, MFP14S and MFP14SS Automatic Pumps

MFP14, MFP14S and MFP14SS Automatic Pumps Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It

More information

PNEUMATIC VALVES SERIES SBS FAMILY 04 CONTROL VALVES

PNEUMATIC VALVES SERIES SBS FAMILY 04 CONTROL VALVES TO DOWNLOAD TECHNICAL SHEETS, CONSULT OUR WEBSITE IN CATALOGUE SECTION PNEUMATIC VALVES SERIES SBS FAMILY CONTROL VALVES Valves series SBS are modulating globe valves, with or 3 ways. They mount a multi-spring

More information

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap

IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap IBV Series C, Z, C-LF2 Inverted Bucket Vertical Steam Trap Description The IBV series inverted bucket steam trap is manufactured in three different body and cover materials. C Series (carbon steel), Z

More information

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications

2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?

More information

API Flanged Safety Relief Valves Series 526 CATALOG

API Flanged Safety Relief Valves Series 526 CATALOG API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes

More information

PNEUMATIC CONTROL VALVES PV25 (ANSI) V25S globe control valves with linear actuators PA series

PNEUMATIC CONTROL VALVES PV25 (ANSI) V25S globe control valves with linear actuators PA series PNEUMATIC CONTROL VALVES PV25 (ANSI) V25S globe control valves with linear actuators PA series DESCRIPTION The PV25 control valves are single seated, two-way body constructed with in-line straight connections.

More information

Self Operated Pressure Control Valves 5953 and 5954

Self Operated Pressure Control Valves 5953 and 5954 Pagina 1 di 8 7C.400-E Ed. 6 IT - 2010 Self Operated Pressure Control Valves 5953 and 5954 Description Fluxotrol self operated pressure control valves are used for the pressure control of liquids, steam

More information

VAD. Variable Area Desuperheaters

VAD. Variable Area Desuperheaters Desuperheater overview Steam used in process plants can be superheated, that is, heated to a temperature above saturation. The excess of temperature above its saturation is called 'superheat'. Desuperheated

More information

PRODUCT CATALOGUE. Cryogenic Valves

PRODUCT CATALOGUE. Cryogenic Valves PRODUCT CATALOGUE Cryogenic Valves A FEW FACTS ABOUT MACK S. Since its establishment in 1939, Mack Valves have grown to become a leading provider of unique flow control, pressure reducing and safety relief

More information

Series 3250 Globe Control Valve Type 3251 Pneumatic Control Valves Type 3251/3271 and Type 3251/3277

Series 3250 Globe Control Valve Type 3251 Pneumatic Control Valves Type 3251/3271 and Type 3251/3277 Series 350 Globe Control Valve Type 35 Pneumatic Control Valves Type 35/37 and Type 35/377 Application Control valve for process engineering applications with high industrial requirements. s ½ 8 (5 00

More information

VAD Variable Area Desuperheaters

VAD Variable Area Desuperheaters Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve

Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve Type 3510-1 and Type 3510-7 Pneumatic Control Valves Type 3510 Micro-flow Valve ANSI version Application Control valve especially designed for controlling low flow rates in pilot plants and technical research

More information

VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1

VALFONTA USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 USE, INSTALLATION AND MAINTENANCE MANUAL PNEUMATIC CONTROL VALVE MODEL C1 CONTROL VALVE MODEL C1 - Operation and Installation - 1 - manual C1-13B-ENG.doc JANUARY 2014 INDEX PAGE 1 IDENTIFICATION PLATE

More information

Series # Flanged Cast Steel Gate Valve Features

Series # Flanged Cast Steel Gate Valve Features Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated

More information

CSF16 and CSF16T Stainless Steel Steam Filters

CSF16 and CSF16T Stainless Steel Steam Filters Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

Fig B34 and Fig B36 'T' Type or Basket Type Strainers

Fig B34 and Fig B36 'T' Type or Basket Type Strainers 1610250 / 1 IM-S60-24 ST Issue 1 Fig B34 and Fig B36 'T' Type or Basket Type Strainers Installation and Maintenance Instructions 1. Safety information Basket type Designed for fitting into a horizontal

More information

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200

BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 BALL VALVE KPN-G FULL BORE, DN15 DN200, PN6, PN16, PN40** GAS DN25 DN50 DN65 DN100 DN125 DN200 1 Materials 1 Body Ductile Iron GGG40 2 Ball Stainless Steel A304 3 Stem Stainless Steel A304 4 Seats PTFE

More information

PN5000 and PN6000 Series Pneumatic Actuators

PN5000 and PN6000 Series Pneumatic Actuators 3570050/9 IM-P357-04 CH Issue 9 PN5000 and PN6000 Series Pneumatic Actuators Installation and Maintenance Instructions 1. Safety information 2. General product information PN5100 PN6100 PN5200 PN5300 PN5400

More information

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2" 4" Stainless or Carbon Steel.

3L/T 2100F-A Series. Ball Valve, 3 Way 740 / 580 psi CWP Threaded or Welded Ends, Side Entry, 1/2 4 Stainless or Carbon Steel. Features Bolted body construction Investment cast body actuator mounting pad Direct mount Blow-out proof stem 4-seat design Adjustable, live loaded packing Secondary stem seal O-ring /" - " Extra deep

More information

Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)

Series 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7) Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.

More information

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size

CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance

More information

Fig B36 Stainless Steel 'T' Type or Basket Type Strainers

Fig B36 Stainless Steel 'T' Type or Basket Type Strainers Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without

More information

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves

BS EN ISO 9001 FM Worcester Controls C44 Cryogenic 3-Piece Ball Valves BS EN ISO 9001 0086 as FM 00707 Worcester Controls Cryogenic 3-Piece Ball Valves Cryogenic Valve Design Worcester's experience and expertise in the design of cryogenic ball valves has been recognised throughout

More information

V Series Control Port Ball Valves

V Series Control Port Ball Valves Triac V Series Ball Valves are ideal for achieving more precise control with the simplicity and sealing features of a ball valve. We offer them 1/2 4 in a 3-piece design and 1/2 6 flanged. The standard

More information

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a

Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial

More information

SelfAct TM Selfacting Control Valve PN 10-40, DN

SelfAct TM Selfacting Control Valve PN 10-40, DN SelfAct TM Selfacting Control Valve PN -, DN - 0 SCHERR Application Self-actuating Pressure Reducing Valves are used to provide a constant pressure downstream of its built-in position. Suitable for steam,

More information

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR

S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,

More information

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification...

OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS. INTRODUCTION...1 Scope...1 Description...1 Valve Identification... OPERATING and MAINTENANCE MANUAL SERIES 2700A CONTROL VALVE CONTENTS INTRODUCTION...1 Scope...1 Description...1 Valve Identification...2 1.0 VALVE INSTALLATION...2 2.0 VALVE MAINTENANCE...3 Actuator Disassembly...3

More information

Piston Valves. Il futuro come tradizione. Our tradition is the future. Quality Valves & Level Gauges

Piston Valves. Il futuro come tradizione. Our tradition is the future. Quality Valves & Level Gauges Piston Valves Il futuro come tradizione BONETTI Our tradition is the future BONETTI PISTON VALVES BONETTI SERIES GENERAL INFORMATION Seat tightness in a piston valve is obtained by a cylindrically shaped

More information

FlowPak TM General Application Valve 1/2-4, Class 150

FlowPak TM General Application Valve 1/2-4, Class 150 FlowPak TM General Application Valve 1/2-4, Class 150 SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital Positioner Type Logix 5si,

More information

Pneumatic Control Valves - PV25

Pneumatic Control Valves - PV25 V25G Globe Control Valves with Linear Actuators PA Series Description The PV25 control valves are single seated, two-way body constructed with in-line straight connections. The PA pneumatic actuator is

More information

NEWCO. Forged Steel Valves. Technical Data TC9308-4

NEWCO. Forged Steel Valves. Technical Data TC9308-4 NEWCO Forged Steel Valves Technical Data All the information contained in this manual is the exclusive property of Cameron. Any reproduction or use of the calculations, drawings, photographs, procedures

More information

Fisher easy-e Cryogenic Sliding-Stem Control Valves

Fisher easy-e Cryogenic Sliding-Stem Control Valves easy-e Cryogenic Valves Product Bulletin Fisher easy-e Cryogenic Sliding-Stem Control Valves Fisher easy-e cryogenic valves are globe-style, single-port, valves featuring stainless steel construction materials

More information

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700

SAPAG. Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Safety Relief Valve Series 5700 SAPAG Spring loaded, fixed blowdown, integral nozzle Safety Relief Valve. Features Thermal expansion, to API 520 Certified to ASME VIII for air and steam Gas, Steam and Liquid service Integral nozzle -

More information

Ductile Iron and Cast Iron Gate Valves

Ductile Iron and Cast Iron Gate Valves SETION b uctile Iron and ast Iron Gate Valves Tel: + ()195 71 Fax: + ()195 71 Email: sales@hattersley.com export@hattersley.com www.hattersley.com ontents uctile Iron and ast Iron Gate Valves ontents Page

More information

Kämmer Series 185000 Laboratory Valves

Kämmer Series 185000 Laboratory Valves flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless

More information

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components

Mustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE

More information

2-way control valves VEFS 2

2-way control valves VEFS 2 Data sheet 2-way control valves VEFS 2 Description/Application VEFS 2 valves are a range of 2 port high specification flanged valves for chilled water, LPHW, MPHW, HPHW (low, medium or high pressure hot

More information

Series # Flanged Cast Steel Check Valve

Series # Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve Design eatures Bolted Cover Swing Type Integral Seat Applicable Standards Steel valves ANSI B16.34 ace to face ANSI B16.10 End flanges ANSI B16.5 Butt-weld

More information

TECHNICAL BULLETIN. Kämmer LinedFlow - 132000 Corrosive Application Valves. Experience In Motion FCD KMENTB3221-01 04/12

TECHNICAL BULLETIN. Kämmer LinedFlow - 132000 Corrosive Application Valves. Experience In Motion FCD KMENTB3221-01 04/12 TECHNICAL BULLETIN Kämmer LinedFlow - 132000 Corrosive Application Valves FCD KMENTB3221-01 04/12 Experience In Motion Description ¼-inch NPT test port Large guided stem area Bellows seal eliminates stem

More information

PROFLEX Control Valves

PROFLEX Control Valves PROFLEX Control Valves Globe Control Valves 3-way Control Valves Pneumatic Diaphragm Actuators, Type T Pneumatic Diaphragm Actuators, Type S Pneumatic Screw-in Temperature Controllers Operating Instruction

More information

Control valves with pneumatic actuators up to 350 C PN

Control valves with pneumatic actuators up to 350 C PN 300 540 1080 2 Features Suitable in building and process engineering for various mediums 0...+200 C Suitable with stuffing box extension or stem seal with stainless steel bellow to 10...+350 C and for

More information

M10P Ball Valve Screwed, SW and BW versions Installation and Maintenance Instructions

M10P Ball Valve Screwed, SW and BW versions Installation and Maintenance Instructions BAC 13352 IM-P133-52 ST Issue 1 M10P Ball Valve Screwed, SW and BW versions Installation and Maintenance Instructions 1. General safety information 2. General product information 3. Installation 4. Commissioning

More information

PRESSURE REDUCING CONTROL VALVE

PRESSURE REDUCING CONTROL VALVE Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line

More information

Blowdown vessels Meeting the requirements of HSE PM60

Blowdown vessels Meeting the requirements of HSE PM60 Blowdown vessels Meeting the requirements of HSE PM60 BDV60 blowdown vessels complete range of equipment for the safe disposal of boiler blowdown Boiler blowdown Steam boilers must be blown down to remove

More information

Series 25114 150# Flanged Cast Steel Check Valve

Series 25114 150# Flanged Cast Steel Check Valve Series 25114 150# langed Cast Steel Check Valve eatures SHARPE - SERIES 25114 150# langed Cast Steel Check Valve Bolted Cover Swing Type or Horizontal or Vertical lines Integral Seat langed Ends Butt Weld

More information

Local Expertise - World Class Solutions

Local Expertise - World Class Solutions GLOBE CONTROL VALVES Local Expertise - World Class Solutions MITECH GLOBE CONTROL VALVES The modular, flexible option ABOUT GLOBE CONTROL VALVES Mitech Globe Control valves are general purpose control

More information

SISTO-16TWA/HWA/DLU. Type Series Booklet

SISTO-16TWA/HWA/DLU. Type Series Booklet Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents

More information

PRESSURE REGULATORS GAS LOW PRESSURE PRESSURE REDUCING

PRESSURE REGULATORS GAS LOW PRESSURE PRESSURE REDUCING GAS LOW PRESSURE PRESSURE REDUCING APPLICATIONS: Low pressure regulator for maintaining vapor pressure on storage tanks, controlling compressor by-pass for gas recirculation and maintaining low pressure

More information

High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458

High CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458 LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com

More information

Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves

Specification Data CM37002 09/10. Putting You In Control. 37002 Series MiniTork ll Control Valves. Heavy Duty Control Butterfly Valves Putting You In Control Specification ata CM37002 09/10 37002 Series MiniTork ll Control Valves Heavy uty Control Butterfly Valves resser Masoneilan 37002 Series MiniTork II Control Valves Heavy uty Control

More information

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION

INSTALLATION INSTRUCTIONS. CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION INSTALLATION INSTRUCTIONS CVS 67CFR Pressure Reducing Instrument Supply Regulator INTRODUCTION The CVS Controls 67CFR Filter regulator is a pressure reducing supply regulator typically used for pneumatic

More information

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24

ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24 Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical

More information

1900/P Series. Consolidated * Valves. Safety Relief Valve

1900/P Series. Consolidated * Valves. Safety Relief Valve GE Oil & Gas Technical Specifications 11/2014 Consolidated * s 1900/P Series Safety Relief The 1900/P Safety Relief is designed to be highly adaptable to meet numberous application requirements. Table

More information

Armstrong Python Series 1100 Control Valve Installation and Maintenance

Armstrong Python Series 1100 Control Valve Installation and Maintenance This bulletin should be used by experienced personnel as a guide to the installation and maintenance of the Armstrong Python Control Valve. Selection or installation of equipment should always be accompanied

More information

STAG. Balancing valves DN , PN 25, with grooved end

STAG. Balancing valves DN , PN 25, with grooved end STAG Balancing valves DN 65-300, PN 25, with grooved end IMI TA / Balancing valves / STAG STAG A grooved end, ductile iron balancing valve that delivers accurate hydronic performance in an impressive range

More information

Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23

Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures

More information

Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting

Flow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow

More information

Every component precisely matched

Every component precisely matched Series 200 Every component precisely matched Powerful valve actuator Most commonly used is the pneumatic multi-spring actuator series MA as shown here. It is robust, ex-proof, features low actuating times,

More information

PBX Series Quick Fit Connector Bimetallic Steam Traps

PBX Series Quick Fit Connector Bimetallic Steam Traps 6262100/6 IM-P626-01 ST Issue 6 PBX Series Quick Fit Connector Bimetallic Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning

More information

MP8000 Series. Pneumatic Valve Actuators

MP8000 Series. Pneumatic Valve Actuators FANs 977, 168.3 Product Bulletin MP8000 Issue Date 0301 MP8000 Series Pneumatic Valve Actuators MP8000 Series Pneumatic Valve Actuators are designed to accurately position chilled water, hot water, and

More information

Baumann 24000SB Barstock Control Valve

Baumann 24000SB Barstock Control Valve Instruction Manual 24000SB Valve Baumann 24000SB Barstock Control Valve Contents Introduction... 1 Scope of Manual... 1 Safety Precautions... 2 Maintenance... 3 Installation... 3 Air Piping... 4 Disassembly...

More information

HOPPER SHAPE KNIFE GATE VALVE

HOPPER SHAPE KNIFE GATE VALVE HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the

More information

Integral Block & Bleed Valves. High Technology Valve & Fitting Series

Integral Block & Bleed Valves. High Technology Valve & Fitting Series Integral Block & Bleed Valves High Technology Valve & Fitting Series SUPERLOK instrumentation products has the ultimate solutions for a compact range of one-piece forged body integral block & bleed valves,

More information

BERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features

BERMAD Waterworks. Pressure Reducing Valve. 700 Series. Model 720. Features and Benefits. Major Additional Features Pressure Reducing Valve Flow and leakage reduction Cavitation damage protection Throttling noise reduction Burst protection System maintenance savings The Pressure Reducing Valve is a hydraulically operated,

More information

BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap

BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap 1263050/6 IM-P126-07 ST Issue 6 BPW32 DN15, DN20 and DN25 Balanced Pressure Wafer Steam Trap Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation

More information

Series 240 Pneumatic Control Valves with Fail-safe Action Type and Type 241-7

Series 240 Pneumatic Control Valves with Fail-safe Action Type and Type 241-7 Series 240 Pneumatic Control Valves with Fail-safe Action Type 241-1 and Type 241-7 Typetested Application Control valves for water and steam; with safety function against excess temperature or pressure

More information

Stainless Steel Single and Dual Circulation Kits

Stainless Steel Single and Dual Circulation Kits Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating

More information

ON-OFF FLOAT CONTROL VALVE

ON-OFF FLOAT CONTROL VALVE ON-OFF FLOAT CONTROL VALVE (4 and Smaller) /08 Schematics Opens when float reaches low level stop Closes when float reaches high level stop Low and High Level stop collars are adjustable P/L X Standard

More information

Every component precisely matched

Every component precisely matched Series DKV Every component precisely matched Multi-functional positioner The ARCAPRO digital positioner is a multi-functional interface with the controller or process control system and operates as standard

More information

Self-contained valve functions as integral check valve, flow sensing element and bypass control valve.

Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control

More information

Main Offices and Factory

Main Offices and Factory Main Offices and Factory Design, Manufacture and Servicing of Pneumatic/Electric Powered Valves, Control&ON-OFF Valves and Self-Acting Pressure Reducers Trading of Heat Exchangers & Components for Industrial

More information

Diaphragm Control Valves FLUXOTROL Series I and Series 25 Installation and Maintenance Instructions

Diaphragm Control Valves FLUXOTROL Series I and Series 25 Installation and Maintenance Instructions Diaphragm Control Valves FLUXOTROL Series I and Series 25 Installation and Maintenance Instructions 1. General 2. Installation instructions 3. Maintenance instructions 4. Spare parts list IMPORTANT SAFETY

More information

2- and 3-port valves with flanged connections, PN 10

2- and 3-port valves with flanged connections, PN 10 4 402 VVF32.. VXF32.. ACVATIX 2 and 3port valves with flanged connections, PN 10 From the largestroke valve line VVF32.. VXF32.. Performance valves for medium temperatures from 10 150 C Valve body of grey

More information

FT43, FT44, FT46 and FT47 Ball Float Steam Traps

FT43, FT44, FT46 and FT47 Ball Float Steam Traps 0667050/9 IM-S02-30 ST Issue 9 FT43, FT44, FT46 and FT47 Ball Float Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning

More information

Technical Manual. Register 18 Contents - T4E

Technical Manual. Register 18 Contents - T4E Page: 1 Contents Register 18 Contents - T4E Page Technical Data T4E-1, DN½ to DN6...2 Technical Data T4E-1, DN8 to DN12...3 Technical Data T4E-2, DN15 to DN150...4 Technical Data T4E-2, DN200 to DN300...5

More information

Experience In Motion. Valtek Spring Cylinder Linear Actuators

Experience In Motion. Valtek Spring Cylinder Linear Actuators Experience In Motion Valtek Spring Cylinder Linear Actuators Valtek Spring Cylinder Linear Actuator Flowserve spring cylinder linear actuators are powerful, compact, high-performance pneumatic actuators

More information

GATE VALVES. Overview... 10

GATE VALVES. Overview... 10 Overview... 0 olted onnet ate- 800 lb. & 0 lb. valves... olted onnet ate- 0 lb. & 0 lb. valves... Welded onnet ate- 800 lb. & 0 lb. valves... 3 Welded onnet ate- 0 lb. & 40 lb. valves... 4 TE VLVES 9 OVERVIEW

More information

Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve

Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve Self-operated Pressure Regulators Type 41-23 Universal Pressure Reducing Valve JIS version Application Pressure regulators for set points from 5 to 2800 kpa/0.05 to 28 bar Valve sizes ½B/15A to 4B/100A

More information

Self-operated Temperature Regulators Type 1 to Type 9. PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F

Self-operated Temperature Regulators Type 1 to Type 9. PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F Self-operated Temperature Regulators Type 1 to Type 9 PN 16 to 40 Class 125 to 300 DN 15 to 250 NPS ½ to 10 G ½ to 1 Up to 350 C Up to 660 F Edition April 2012 Information Sheet T 2010 EN Self-operated

More information

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve.

INOX-VAL SERIES STAINLESS STEEL BALL VALVE. 2 pc stainless steel ASTM A351 - CF8M ball valve. INOX-VAL SERIES 70000 STAINLESS STEEL BALL VALVE pc stainless steel ASTM A35 - CF8M ball valve. psi TUV T.A.Luft approved. COMPLIES WITH NACE MR 075, NACE MR 003 AND ISO 55 AVAILABLE FIRE SAFE APPROVED

More information

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL

ATEX 94/9/EC SIL3 IEC GOST-R TYPE APPROVAL ATEX 94/9/EC SIL3 IEC 61508 GOST-R TYPE APPROVAL 95 90 75 Stroke 15 0 4. Universal and anti-blowout drive shaft It permits an easy conversion from parallel to diagonal square and vice versa. It is also

More information

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X

NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X NELES SOFT SEATED BALL VALVES, SEAT SUPPORTED, FULL AND REDUCED BORE, SERIES X Metso's Neles series X is a seat supported modular ball valve. Neles X series valves incorporate robust stem to ball connection.

More information

61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve

61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve 61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life

More information

Single and Double Window Sight Glasses and Sight Check

Single and Double Window Sight Glasses and Sight Check 0222050/8 IM-S32-04 ST Issue 8 Single and Double Window Sight Glasses and Sight Check Installation and Maintenance Instructions 1. Safety information 2. General product information Single window sight

More information

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP

ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 / DP32 / DP33 / DP34 / DP34T / DP34Tri / DP35 Pneumatic actuator ARI-DP Pneumatic actuator ARI-DP ARI-DP30 Pneumatic actuator Page 2 ARI-DP32 ARI-DP33 Pneumatic actuator DP-Actuator Extended stem

More information