LIST OF CITATIONS (GRAND TOTAL: NOT INCLUDING SELF-CITATIONS)

Size: px
Start display at page:

Download "LIST OF CITATIONS (GRAND TOTAL: 131 - NOT INCLUDING SELF-CITATIONS)"

Transcription

1 LIST OF CITATIONS (GRAND TOTAL: NOT INCLUDING SELF-CITATIONS) B.6. Ilgin, M.A. and Gupta, S.M., Performance Improvement Potential of Sensor Embedded Products in Environmental Supply Chains, Resources, Conservation and Recycling, Special Issue on Environmental Supply Chain Management, Vol. 55, No. 6, , (Total Citations: 2). Citations from SCI-Expanded, SSCI and AHCI Indexed Journals: 1. Tian, G., Zhou, M. C., Chu, J. and Liu, Y., Probability Evaluation Models of Product Disassembly Cost Subject to Random Removal Time and Different Removal Labor Cost, IEEE Transactions on Automation Science and Engineering, 2012, in press. Citations from Books and Other Publications: 1. McGovern, S.M. and Gupta, S.M., The Disassembly Line: Balancing and Modeling, McGraw Hill, New York, ISBN: , B.5. Ilgin, M.A. and Gupta, S.M., Evaluating the Impact of Sensor Embedded Products on the Performance of an Air Conditioner Disassembly Line, International Journal of Advanced Manufacturing Technology, Vol. 53, No. 9-12, , (Total Citations: 2). Citations from SCI-Expanded, SSCI and AHCI Indexed Journals: 1. Tian, G., Zhou, M. C., Chu, J. and Liu, Y., Probability Evaluation Models of Product Disassembly Cost Subject to Random Removal Time and Different Removal Labor Cost, IEEE Transactions on Automation Science and Engineering, 2012, in press. Citations from Books and Other Publications: 1. McGovern, S.M. and Gupta, S.M., The Disassembly Line: Balancing and Modeling, McGraw Hill, New York, ISBN: , 2011.

2 B.4. Ilgin, M.A. and Gupta, S.M., Recovery of Sensor Embedded Washing Machines Using a Multi Kanban Controlled Disassembly Line, Robotics and Computer Integrated Manufacturing, Vol. 27, No. 2, , (Total Citations: 3). Citations from SCI-Expanded, SSCI and AHCI Indexed Journals: 1. Tian, G., Zhou, M. C., Chu, J. and Liu, Y., Probability Evaluation Models of Product Disassembly Cost Subject to Random Removal Time and Different Removal Labor Cost, IEEE Transactions on Automation Science and Engineering, 2012, in press. Citations from Books and Other Publications: 1. Meyer, G.G., Effective Monitoring and Control with Intelligent Products, PhD Thesis, (Adviser: Dr. J.C. Wortmann), Department of Business and ICT, University of Groningen, The Netherlands, McGovern, S.M. and Gupta, S.M., The Disassembly Line: Balancing and Modeling, McGraw Hill, New York, ISBN: , B.3. Ilgin, M.A. and Gupta, S.M., Comparison of Economic Benefits of Sensor Embedded Products and Conventional Products in a Multi-product Disassembly Line, Computers & Industrial Engineering, Vol. 59, No. 4, , (Total Citations: 4). Citations from SCI-Expanded, SSCI and AHCI Indexed Journals: 1. Tian, G., Zhou, M. C., Chu, J. and Liu, Y., Probability Evaluation Models of Product Disassembly Cost Subject to Random Removal Time and Different Removal Labor Cost, IEEE Transactions on Automation Science and Engineering, 2012, in press. 2. Ruan, J. and Zhenming Xu, Environmental Friendly Automated Line for Recovering the Cabinet of Waste refrigerator, Waste Management, Vol. 31, No. 11, , (SCI-Expanded). Citations from Books and Other Publications: 1. Mar-Ortiz, J., Gonzalez-Velarde, J. L. and Adenso-Diaz, B., "Metaheuristics for a Disassembly Cell Formation Problem", Proceedings of the 8th Conference on Bio-Inspired Evolutionary Algorithms and Metaheuristics (MAEB 2012), Albacete, Spain, February 8-10, 2012.

3 2. McGovern, S.M. and Gupta, S.M., The Disassembly Line: Balancing and Modeling, McGraw Hill, New York, ISBN: , B.2. Ilgin, M.A. and Gupta, S.M., Environmentally Conscious Manufacturing and Product Recovery (ECMPRO): A Review of the State of the Art, Journal of Environmental Management, Vol. 91, No. 3, , (Total Citations: 107). Citations from SCI-Expanded, SSCI and AHCI Indexed Journals: 1. Tian, G., Zhou, M. C., Chu, J. and Liu, Y., Probability Evaluation Models of Product Disassembly Cost Subject to Random Removal Time and Different Removal Labor Cost, IEEE Transactions on Automation Science and Engineering, 2012, in press. 2. Arslan, T., Yilmaz, V. and Aksoy, H. K., Structural Equation Model for Environmentally Conscious Purchasing Behavior, International Journal of Environmental Research, Vol. 6, No. 1, , Nikolaou, I.E., Evangelinos, K. and Allan, S., A Reverse Logistics Social Responsibility Evaluation Framework based on the Triple Bottom Line Approach, Journal of Cleaner Production, in press. 4. Hasani, A., Zegordi, S. H. and Nikbakhsh, E., Robust Closed-Loop Supply Chain Network Design for Perishable Goods in Agile Manufacturing under Uncertainty, International Journal of Production Research, in press. 5. El Saadany, A.M.A, Jaber, M.Y. and Bonney, M., "How Many Times to Remanufacture", International Journal of Production Economics, in press. 6. Go, T. F., Wahab, D. A., Ab. Rahman, M. N., Ramli, R. and Hussain, A., "Genetically Optimised Disassembly Sequence for Automotive Component Reuse", Expert Systems with Applications, Vol. 39, No. 5, , Yang, C.-L. and Sheu, C., "The Effects of Environmental Regulations on Green Supply Chains", African Journal of Business Management, Vol. 5, No. 26, , Pishvaee, M.S. and Razmi, J., Environmental Supply Chain Network Design Using Multi-Objective Fuzzy Mathematical Programming, Applied Mathematical Modeling, in press. 9. Altekin, F. T. and Akkan, C., "Task-Failure-Driven Rebalancing of Disassembly Lines", International Journal of Production Research, in press. 10. Kwak, M., Behdad, S., Zhao, Y., Kim, H. and Thurston, D., E-Waste Stream Analysis and Design Implications, Journal of Mechanical Design, Vol. 133, No. 9, Paper no , 2011.

4 11. Krikke, H., Impact of Closed-Loop Network Configurations on Carbon Footprints: A Case Study in Copiers, Resources, Conservation and Recycling, Vol. 55, No. 12, , Fu, X., Zhu, Q. and Sarkis, J., Evaluating Green Supplier Development Programs at a Telecommunications Systems Provider, International Journal of Production Economics, in press. 13. Das, K., "Integrating Reverse Logistics into the Strategic Planning of a Supply Chain", International Journal of Production Research, in press. 14. Pochampally, K. K. and Gupta, S. M., Use of Linear Physical Programming and Bayesian Updating for Design Issues in Reverse Logistics, International Journal of Production Research, in press. 15. Ozkir, V. and Basligil, H., "Modelling Product-Recovery Processes in Closed-Loop Supply-Chain Network Design", International Journal of Production Research, in press. 16. Rahman, S. and Subramanian, N., Factors for Implementing End-of-Life Computer Recycling Operations in Reverse Supply Chains, International Journal of Production Economics, in press. 17. Tian, G., Liu, Y., Ke, H. and Chu, J., Energy Evaluation Method and its Optimization Models for Process Planning with Stochastic Characteristics: A Case Study in Disassembly Decision-Making, Computers and Industrial Engineering, in press. 18. Tian, G., Liu, Y., Tian, Q. and Chu, J., Evaluation Model and Algorithm of Product Disassembly Process with Stochastic Feature, Clean Technologies and Environmental Policy, in press. 19. Das, K. and Chowdhury, A.H. Designing a Reverse Logistics Network for Optimal Collection, Recovery and Quality-based Product-mix Planning, International Journal of Production Economics, Vol. 135, No. 1, , Ruan, J. and Zhenming Xu, Environmental Friendly Automated Line for Recovering the Cabinet of Waste refrigerator, Waste Management, Vol. 31, No. 11, , Bovea, M.D. and Pérez-Belis, V., A Taxonomy of Ecodesign Tools for Integrating Environmental Requirements into the Product Design Process, Journal of Cleaner Production, Vol. 20, No.1, 61-71, Hatcher, G.D., Ijomah, W.L. and Windmill, J.F.C., Design for Remanufacture: A literature review and future research needs, Journal of Cleaner Production, Vol. 19, No , , Vinodh, S., Nachiappan, N. and Kumar, R.P. Sustainability through Disassembly Modeling, Planning, and Leveling: A Case Study Clean Technologies and Environmental Policy, in press. 24. Olugu, E.U. and Wong, K.Y. Fuzzy Logic Evaluation of Reverse Logistics Performance in the Automotive Industry, Scientific Research and Essays, Vol. 6, No. 7, , Lee, C., Realff, M. and Ammons, J., Integration of channel decisions in a decentralized reverse production system with retailer collection under deterministic non-stationary demands, Advanced Engineering Informatics, Vol. 25, No. 1, , 2011.

5 26. Aksoy, H.K. and Gupta, S.M., Optimal Management of Remanufacturing Systems with Server Vacations, International Journal of Advanced Manufacturing Technology, Vol. 54, No. 9-12, , Inghels, D. and Dullaert, W., An Analysis of Household Waste Management Policy Using System Dynamics Modeling, Waste Management & Research, Vol. 29, No. 4, Ramani, K., Ramanujan, D., Bernstein, W.Z., Zhao, F., Sutherland, J. and Handwerker, C., Integrated Sustainable Lifecycle Design: A Review, Journal of Mechanical Design, Vol. 132, No. 9, , Krikke, H., Opportunistic versus Life-cycle-oriented Decision Making in Multi-loop Recovery: An Ecoeco Study on Disposed Vehicles, International Journal of Life Cycle Assessment, Vol. 15, No. 8, , Subramoniam, R., Huisingh, D. and Chinnam, R.B., Aftermarket Remanufacturing Strategic Planning Decision-making Framework: Theory & Practice, Journal of Cleaner Production, Vol. 18, No , , Aksoy, H.K. and Gupta, S.M., Near Optimal Buffer Allocation in Remanufacturing Systems with N- Policy, Computers & Industrial Engineering, Vol. 59, No. 4, , Matsumoto, M. Development of a simulation model for reuse businesses and case studies in Japan, Journal of Cleaner Production, Vol. 18, No.13, , Lee, H.B., Cho, N.W. and Hong, Y.S., A Hierarchical End-of-Life Decision Model for Determining the Economic Levels of Remanufacturing and Disassembly under Environmental Regulations, Journal of Cleaner Production, Vol. 18, No.13, , Bai, C. and Sarkis, J., Green Supplier Development: Analytical Evaluation Using Rough Set Theory, Journal of Cleaner Production, Vol. 18, No. 12, , Vinodh, S., Improvement of Agility and Sustainability: A Case Study in an Indian Rotary Switches Manufacturing Organization, Journal of Cleaner Production, Vol. 18, No.10-11, , Citations from the Journals Covered by Other Indexes: 1. ElSayed, A., Kongar, E. and Gupta, S. M., An Evolutionary Algorithm for Selective Disassembly of End-of-Life Products, International Journal of Swarm Intelligence and Evolutionary Computation, Vol. 1, 1-7, Ravi, V., Shankar, R. and Tripathi, N.K., Evaluation of Market Scenarios in Automobile Reverse Logistics: A System Dynamics Approach, International Journal of Logistics Systems and Management, Vol. 10, No. 4, , 2011.

6 3. Benedito, E. and Corominas, A., Optimal Production and Storage Capacities in a System with Reverse Logistics and Periodic Demand, International Journal of Logistics Systems and Management, Vol. 10, No. 3, , Ashayeri, J. and Tuzkaya, G., "Design of Demand Driven Return Supply Chain for High-Tech Products", Journal of Industrial Engineering and Management, Vol. 4, No. 3, , Eguia,I., Lozano, S., Racero, J. and Guerrero, F., "A Methodological Approach for Designing and Sequencing Product Families in Reconfigurable Disassembly Systems", Journal of Industrial Engineering and Management, Vol. 4, No. 3, , Kuik, S. S., Nagalingam, S. V. and Amer, Y., "Sustainable Supply Chain for Collaborative Manufacturing", Journal of Manufacturing Technology Management, Vol. 22, No. 8, , Olugu, E.U. and Wong, K.Y., Evaluation of Green Supply Chain Management Practices in the Malaysian Automotive Industry, International Journal of Services and Operations Management, Vol. 9, No. 2, , Ghazalli, Z. and Murata, A., An Integrated TSP-GA with EOL Cost Model for Selecting the Best EOL Option, International Journal of Industrial Engineering Computations, Vol. 2, No. 4, , Rio, M., Reyes, T. and Roucoules, L., A Framework for Ecodesign: An Interface between LCA and Design Process, Annals of Faculty Engineering Hunedoara International Journal of Engineering, Vol. 9, No. 1, , Langella, I.M. and Zanoni, S., Eco-efficiency in Logistics: A Case Study on Distribution Network Design, International Journal of Sustainable Engineering, Vol. 4, No. 2, , Alimoradi, A., Yussuf, R. M. and Zulkiffii, N., "A Hybrid Model for Remanufacturing Facility Location Problem in a Closed-Loop Supply Chain", International Journal of Sustainable Engineering, Vol. 4, No. 1, 16-23, Ghazalli, Z. and Murata, A., Development of an AHP-CBR Evaluation System for Remanufacturing: End-of-life Selection Strategy, International Journal of Sustainable Engineering, Vol. 4, No.1, 2-15, Tateno, T. and Kondoh, S., "Eco-agent System for Promoting Reuse of Product Modules", Transactions of the Japan Society of Mechanical Engineers, Part C, Vol. 76, No. 772, , Bai, C., Sarkis, J. and Wei, X. Addressing Key Sustainable Supply Chain Management Issues Using Rough Set Methodology, Management Research Review, Vol. 13, No. 12, , Go, T.F., Wahab, D.A., Ab. Rahman, M.N., Ramli, R. and Azhari, C.H., Disassembly for Reuse: Implementation in the Malaysian Automotive Industry, Australian Journal of Basic and Applied Sciences, Vol. 4, No. 10, , 2010.

7 16. Ferguson, M., Strategic and Tactical Aspects of Closed-Loop Supply Chains, Foundations and Trends in Technology, Information and Operations Management, Vol. 3, No. 2, , Go, T.F., Wahab, D.A., Rahman, M.N.A. and Ramli, R., A Design Framework for End-of-Life Vehicles Recovery: Optimization of Disassembly Sequence Using Genetic Algorithms, American Journal of Environmental Sciences, Vol. 6, No. 4, , Citations from Books and Other Publications: 1. Diaz Lopez, F.J. and Montalvo, C. The Greening of the Chemical Industry: Past, Present and Challenges Ahead, in the Green Chemistry for Environmental Remediation, Edited by R. Sanghi and V. Singh, John & Wiley Sons, pp , ISBN: , Dixit, U. S., Sarma, D. K. and Davim, J. P., Environmentally Friendly Machining, Springer New York, ISBN , Kalayci, C. B., Gupta, S. M. and Nakashima, K., A Simulated Annealing Algorithm for Balancing a Disassembly Line, Proceedings of the Seventh International Symposium on Environmentally Conscious Design and Inverse Manufacturing (EcoDesign 2011), Kyoto, Japan, pp , November 30- December 2, Kalayci, C. B., Gupta, S. M. and Nakashima, K., Bees Colony Intelligence in Solving Disassembly Line Balancing Problem, Proceedings of the 2011 Asian Conference of Management Science and Applications (ACMSA2011), Sanya, Hainan, China, pp , December 21-22, Nakashima, K., A Design for Closed Loop Manufacturing Systems with Consideration for Parts Quality, Proceedings of the 2011 Asian Conference of Management Science and Applications (ACMSA2011), Sanya, Hainan, China, pp , December 21-22, Winnard, J., Adcroft, A., Elghali, L., France, C., Lee, J. and Skipp, D., "Resilient Sustainable Automotive Strategy", Proceedings of the 2011 Conference for the Engineering Doctorate Programmes in Environmental Technology and Sustainability for Engineering and Energy Systems, University of Surrey, UK,pp , June 21-22, Klassen, R.D. and Vachon, S. Greener Supply Chain Management, in The Oxford Handbook of Business and the Natural Environment, Edited by P. Bansal and A.J. Hoffman, Oxford University Press, pp , ISBN: , Sahinoglu, F. and Irk, F., The Analysis of Global Sustainable Manufacturing in Research Master's Thesis, (Advisor: Prof. Marco Taisch), Department of Management, Economics and Industrial Engineering, Milan Polytechnic University, October 2011.

8 9. Romero, D. and Molina, A., "Green Virtual Enterprise Breeding Environment Reference Framework", in Adaptation and Value Creating Collaborative Networks (Proceedings of the 12th IFIP WG 5.5Working Conference on Virtual Enterprises, (PRO-VE 2011), Sao Paulo, Brazil, October 17-19, 2011), Edited by Luis M. Camarinha-Matos, Alexandra Pereira-Klen and Hamideh Afsarmanesh, Springer Heidelberg Dordrecht London New York, pp , ISBN: , Kumar, A., "An Integrated Decision Support Framework for Remanufacturing in the Automotive Industry", PhD Thesis, (Advisor: Prof. Ratna Babu Chinnam), Department of Industrial Engineering, Wayne State University, Detroit, Michigan, Wang, H.-F. and Gupta, S.M., Green Supply Chain Management, McGraw Hill, New York, ISBN: , McMillan, C. A., "Modeling Temporal Aluminum Material Flows and Greenhouse Gas Emissions to Evaluate Metals Recycling Allocation in Life Cycle Assessment", PhD Thesis, (Advisor: Professor Gregory A. Keoleian), School of Natural Resources and Environment, University of Michigan, Ann Arbor, Michigan, Joshi, A., "A Simulation Study for Inventory Management Policies and its Impact on Profitability for a Product Recovery Facility", Master's Thesis, (Advisor: Dr. Can Saygin), Department of Mechanical Engineering, University of Texas at San Antonio, May Chemineau, L., Eco-Design Method Based on Recovery Paths Modelling and Assessment. Applications in Automotive Industry, PhD Thesis, (Advisor: Dr. Daniel Froelich), Paris Institute of Technology, France, Li, X. and Li, Y., "Supply Chain Models with Active Acquisition and Remanufacturing", in Supply Chain Coordination under Uncertainty, Edited by T.-M. Choi and T. C. E. Cheng, Springer-Verlag Berlin Heidelberg, pp , ISBN: , Schroeder, N. B., Design of a Second Life Product Family from the Perspective of the Remanufacturing Agent, Master s thesis, (Advisor: Dr. Harrison Kim), Department of Industrial and Enterprise Systems Engineering, University of Illinois at Urbana-Champaign, USA, Delice, I.I., Stability Analysis of Multiple Time-Delay Systems with Applications to Supply Chain Management, PhD Thesis, (Advisor: Dr. Rifat Sipahi), Department of Mechanical & Industrial Engineering, Northeastern University, Boston, MA, USA, Lim, L.L. Optimal Control of a Hybrid Production/Remanufacturing System Using One Shared Resource, Master s Thesis, (Advisors: Dr. S.D.P Flapper and Dr. J.P. Gayon), School of Industrial Engineering, Eindhoven University of Technology, Eindhoven, The Netherlands, McGovern, S.M. and Gupta, S.M., The Disassembly Line: Balancing and Modeling, McGraw Hill, New York, ISBN: , 2011.

9 20. Gazhilieva, A. and Avila, A.P., Proactive Integration of Environmental Concerns in Business Operations and Organizational Structure: ECD&M and EMS, Master s thesis, (Advisors: Dr. Susanne Hertz and Lianguang Cui), International Business School, Jonkoping University, Sweden, Johar, B.O., Inventory Control Issues in a Disassembly Line, PhD thesis, (Advisor: Dr. Surendra M. Gupta), Department of Mechanical & Industrial Engineering, Northeastern University, Boston, MA, USA, Massoud, A.Z., Solving the Disassembly-to-Order System Under Stochastic Yields, Limited Supply, and Quantity Discount, PhD thesis, (Advisor: Dr. Surendra M. Gupta), Department of Mechanical & Industrial Engineering, Northeastern University, Boston, MA, USA, Rao, R V, Bleicher, F, Singh, D, Kalyankar, V and Dorn, C, "Selecting Environmentally Conscious Manufacturing Program using Combinatorial Mathematics Approach", Proceedings of the 2011 International Conference on Engineering, Project and Production Management, Singapore, pp , September 20-21, Kalayci, C. B. and Gupta, S. M., "A Hybrid Genetic Algorithm Approach for Disassembly Line Balancing", Proceedings of the 2011 Decision Sciences Institute Conference, Boston, Massachusetts, pp , November 19-22, Ondemir, O. and Gupta, S. M., "Multiple Objective Decision Making Approach to End-Of-Life Processing with Sensor-Embedded Products (SEPs)", Proceedings of the 2011 Decision Sciences Institute Conference, Boston, Massachusetts, pp , November 19-22, Nakashima, K. and Kojima, M., "Comparison of Production Policies in a Closed Loop Supply Chain", Proceedings of the 2011 Decision Sciences Institute Conference, Boston, Massachusetts, pp , November 19-22, ElSayed, A., Kongar, E., Gupta, S. M. and Sobh, T., An Online Genetic Algorithm for Automated Disassembly Sequence Generation, Proceedings of ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2011), Paper No. DETC , Washington, DC, USA, August 28-31, Behdad, S., Williams, A. S. and Thurston, D., End of Life Decision Making for Used Products with Uncertain Quantity of Return, Proceedings of ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering CONFERENCE (IDETC/CIE 2011), Paper No. DETC , Washington, DC, USA, August 28-31, Zhao, Y., Xu, J. and Thurston, D., A Hierarchical Bayesian Method for Market Positioning in Environmentally Conscious Design, Proceedings of ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2011), Paper No. DETC , Washington, DC, USA, August 28-31, 2011.

10 30. Zhao, Y. and Thurston, D., "Integrating End-of-Life and Initial Profit Considerations in Product Life Cycle Design", Proceedings of the ASME 2010 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference (IDETC/CIE 2010), Montreal, Canada, Vol. 6, pp , Paper No. DETC , August 15-August 18, Li, C., Tang, Y. and Li, C., A GERT-Based Analytical Method for Remanufacturing Process Routing, Proceedings of the 7th IEEE Conference on Automation Science and Engineering (CASE2011), Trieste, Italy, pp , August 24-27, Priyono, A., Bititci, U. S. and Ijomah, W. L., "Review on Reverse Supply Chain Strategies: Identification of Agenda for Investigation", Proceedings of the International Conference on Remanufacturing, Glasgow, Scotland, pp , July 27-29, Nakashima, K. and Gupta, S. M., "A Remanufacturing Control Problem with Stochastic Variability", Proceedings of the International Conference on Remanufacturing, Glasgow, Scotland, pp , July 27-29, Yamada, T., Kameda, J. and Igarashi, K., "Model and Design of Recycling Disassembly Systems with Material Recovery Values", Proceedings of the International Conference on Remanufacturing, Glasgow, Scotland, pp , July 27-29, Ondemir, O. and Gupta, S. M., "Optimal Planning of Remanufacturing Operations using Sensor- Embedded End-of-Life Products", Proceedings of the International Conference on Remanufacturing, Glasgow, Scotland, pp , July 27-29, Duta, L., Caciula, I. and Addouche, S., On the Profitability of the Disassembly Processes, Proceedings of the 18th IFAC World Congress (IFAC 2011), Milano, Italy, August 28-September 2, pp , ElSayed, A, Kongar, E., Gupta, S.M. and Sobh, T. An Online Genetic Algorithm for Automated Disassembly Sequence Generation, Proceedings of the ASME 2011 International Design Engineering Technical Conferences & Computers and Information in Engineering Conference, August 28-30, Washington, DC, USA, paper number: DETC , Saygin, C. and Guleryuz, B., Impact of Radio Frequency Identification (RFID) on Life Cycle Engineering, Proceedings of the World Congress on Engineering, July 6-8, London, U.K., pp , July 6-8, Kuik, S.S., Nagalingam, S.V. and Amer, Y., Importance of Product Returns and Recovery Operations towards Sustainability in Manufacturing, Proceedings of the 9th ANZAM Operations, Supply Chain and Services Management Symposium, Deakin University, Geelong, Australia, pp , June 15-17, 2011.

11 40. Johar, B.O. and Gupta, S.M., Application of Simulation in Inventory Management of EOL Products in a Disassembly Line, Proceedings of the 2011 Northeast Decision Sciences Institute Conference, Montreal, Canada, pp , April 14-16, (CD-ROM). 41. Teimoury, E., Mazlomi, A., Khondabi, I.G., Abasgholipour, V. and Fathi, M., Inventory Control in Two Part Manufacturing/Remanufacturing Systems with Finite Capacity Under Demand Uncertainty, Proceedings of the International MultiConference of Engineers and Computer Scientists (IMECS 2011), Volume II, Hong Kong, March 16-18, pp , Vercraene, S., Gayon, J.P. and Jemai, Z., Control of a Two-Stage Production/Inventory System with Products Returns, Proceedings of the IFAC 12th LSS Symposium, Villeneuve d'ascq, France, July 12-14, Olugu, E. U., Wong, K. Y. and Shaharoun, M. A., "Investigation of the Extent of Reverse Logistics Management in Malaysian Automotive Industries", Proceedings of the 15th International Symposium on Logistics (ISL 2010), Kuala Lumpur, Malaysia, pp , July 4-7, Diaz, N., Choi, S., Helu, M., Chen, Y., Jayanathan, S., Yasui, Y., Kong, D., Pavanaskar, S. and Dornfeld, D., Machine Tool Design and Operation Strategies for Green Manufacturing, Proceedings of 4th CIRP International Conference on High Performance Cutting, Gifu, Japan, October 24-26, Ashayeri, J. and Tuzkaya, G., Design of Demand Driven Return Supply Chain for Hightech Products, Proceedings of the International Conference on Value Chain Sustainability, Valencia, Spain, pp , November 15-17, Eguia, I., Lozano, S. and Racero, J., Disassembly Process Planning of Reconfigurable Disassembly Systems, Proceedings of the International Conference on Value Chain Sustainability, Valencia, Spain, pp , November 15-17, Toleman, R. and Rose, G., "Active Infrastructure Management (AIM): Using Infrastructure Management to Deliver Sustainable Outcomes", Proceedings of the 12th World Conference on Transport Research, Lisbon, Portugal, July 11-15, (Conference Proceedings Citation Index). 48. Diaz, N., Helu, M. and Dornfeld, D., Design and Operation Strategies for Green Machine Tool Development, Proceedings of MTTRF 2010 Annual Meeting, San Francisco, USA, July 7-8, Diaz, N., Helu, M., Jayanathan, S., Chen, Y., Horvath, A. and Dornfeld, D., Environmental analysis of milling machine tool use in various manufacturing environments, Proceedings of the 2010 IEEE International Symposium on Sustainable Systems and Technology, Arlington, Virginia, USA, pp. 1-6, May 17-19, Aksoy, H.K., Bayesian Updating of Recovery Rate Distribution, Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, USA, pp , March 26-28, 2010.

12 51. Chen, Y-Y. and Wang, H-F., The Flexible Delivery and Pickup Problem with Time Windows, Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, USA, pp , March 26-28, ElSayed, A., Kongar, E. and Gupta, S.M., A Genetic Algorithm Approach to End-of-Life Disassembly Sequencing for Robotic Disassembly, Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, USA, pp , March 26-28, Johar, B.O. and Gupta, S.M., System Dynamics Approach in Inventory Management of Eol Products in a Disassembly Line, Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, USA, pp , March 26-28, Nakashima, K. and Gupta, S.M., Analysis of Remanufacturing Policy with Consideration for Returned Products Quality, Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, USA, pp , March 26-28, Yamada, T., Yamamoto, H., Mitsuhashi, J. and Wakiyama, I. A Modeling of Disassembly Systems with Reverse Blocking Considering Traffic and Buffer Capacities in Sorting Process, Proceedings of the 2010 Northeast Decision Sciences Institute Conference, Alexandria, Virginia, USA, pp , March 26-28, B.1. Ilgin, M.A. and Tunali, S., Joint Optimization of Spare Parts Inventory and Maintenance Policies Using Genetic Algorithms, International Journal of Advanced Manufacturing Technology, Vol. 34, No. 5-6, , (Total Citations: 13). Citations from SCI-Expanded, SSCI and AHCI Indexed Journals: 1. Nguyen, D. and Bagajewicz, M., Optimization of Preventive Maintenance in Chemical Process Plants, Industrial and Engineering Chemistry Research, Vol. 49, No. 9, , Ye, Z., Li, Z. and Xie, M., Some Improvements on Adaptive Genetic Algorithms for Reliability Related Applications, Reliability Engineering and System Safety, Vol. 95, No. 2, , Halim, T. and Tang, L., Confidence Interval for Optimal Preventive Maintenance Interval and Its Applications in Maintenance Planning, The International Journal of Advanced Manufacturing Technology, Vol. 40, No. 1-2, , Nguyen, D., Brammer, C. and Bagajewicz, M., New Tool for the Evaluation of Preventive Maintenance for Chemical Process Plants, Industrial and Engineering Chemistry Research, Vol. 47, No. 6, , 2008.

13 Citations from the Journals Covered by Other Indexes 1. Van Horenbeek, A., Pintelon, L. and Muchiri, P., Maintenance Optimization Models and Criteria, International Journal of System Assurance Engineering and Management, Vol. 1, No. 3, , Mahadevan, M.L. and Robert, T.P. Maintenance optimisation in a cement industry raw-mill system using genetic algorithm, International Journal of Decision Sciences, Risk and Management, Vol. 2, No. 3-4, , Citations from Other Refereed Journals: 1. Liu, D.S., Xu, X.Y., Huang, L.P. and Yue, W.H., Requirement Prediction and Supply Strategy of Spare Parts for a Product Market Cycle, Journal of Hunan University of Science & Technology (Natural Science Edition), (in Chinese), Vol. 25, No. 3, 19-23, Citations from Books and Other Publications: 1. Shortt, D.A., Simulation Based Cost Reduction Methodology for Multi-Part Manufacturing Systems, PhD Thesis, (Advisers: Dr. Khalil Taraman and Dr. Muhammad Ishtiaq Hussain), A. Leon Linton Department of Mechanical Engineering, Lawrence Technological University, USA, September, Elwany, A.H., Sensor-based Prognostics and Structured Maintenance Policies for Components with Complex Degradation, PhD Thesis, (Adviser: Dr. Nagi Gebraeel), School of Industrial and Systems Engineering, Georgia Institute of Technology, USA, December Luttrell, L.T., "Optimizing Multi-Echelon Spare Parts Inventory Policies Under Delayed Lateral Transshipment and Limited Storage Space Using Simulation-Based Optimization", Master's Thesis, (Advisor: Dr. C. Richard Cassady), Department of Industrial Engineering, University of Arkansas, USA, August Lin, X., Condition-Based Spare Parts Supply for Advanced Capital Goods, Master s thesis, (Adviser: Dr. G.J. van Houtum), School of Industrial Engineering, Eindhoven University of Technology, Eindhoven, August Lynch, P.-V., Optimal Spares and Preventive Maintenance Frequencies for Constrained Industrial Systems, Master s thesis, (Adviser: Dr. Kriss Adendorff), Department of Industrial and Systems Engineering, University of Pretoria, South Africa, January 2011.

14 6. Zhou, Y., Asset Life Prediction and Maintenance Decision-Making Using a Non-Linear Non-Gaussian State Space Model, PhD Thesis, (Adviser: Dr. Lin Ma), School of Engineering Systems, Queensland University of Technology, Australia, 2010.

APPLICATION OF SIMULATION IN INVENTORY MANAGEMENT OF EOL PRODUCTS IN A DISASSEMBLY LINE

APPLICATION OF SIMULATION IN INVENTORY MANAGEMENT OF EOL PRODUCTS IN A DISASSEMBLY LINE APPLICATION OF SIMULATION IN INVENTORY MANAGEMENT OF EOL PRODUCTS IN A DISASSEMBLY LINE Badr O. Johar, Northeastern University, (617) 3737635, johar.b@husky.neu.edu Surendra M. Gupta, Northeastern University,

More information

Closed-Loop Supply Chain Networks: an Overview

Closed-Loop Supply Chain Networks: an Overview Closed-Loop Supply Chain Networks: an Overview Abdolhossein S. 1, N. Ismail 1, M. K. A. Ariffin 1, N. Zulkifli 1, H. Mirabi, M. Nikbakht 1 hsadrnia@yahoo.com 1 Department of Mechanical and Manufacturing

More information

Reused Product Pricing and Stocking Decisions in Closed-Loop Supply Chain

Reused Product Pricing and Stocking Decisions in Closed-Loop Supply Chain Reused Product Pricing and Stocking Decisions in Closed-Loop Supply Chain Yuanjie He * California State Polytechnic University, Pomona, USA Abolhassan Halati California State Polytechnic University, Pomona,

More information

Yuanjie He. 2011- Associate Professor, Technology and Operations Management Department, California State Polytechnic University, Pomona

Yuanjie He. 2011- Associate Professor, Technology and Operations Management Department, California State Polytechnic University, Pomona Yuanjie He 3801 W. Temple Ave, Pomona, CA 91768 Office: (909) 869-2458 Technology and Operations Management Department College of Business Administration California State Polytechnic University, Pomona

More information

Contemporary Logistics. Research on Factors that Affect the Eco-efficiency of Remanufacturing Closed-loop Supply Chain

Contemporary Logistics. Research on Factors that Affect the Eco-efficiency of Remanufacturing Closed-loop Supply Chain Contemporary Logistics 02 (2011) 1838-739X Contents lists available at SEI Contemporary Logistics journal homepage: www.seiofbluemountain.com Research on Factors that Affect the Eco-efficiency of Remanufacturing

More information

SUPPLIER SELECTION IN A CLOSED-LOOP SUPPLY CHAIN NETWORK

SUPPLIER SELECTION IN A CLOSED-LOOP SUPPLY CHAIN NETWORK SUPPLIER SELECTION IN A CLOSED-LOOP SUPPLY CHAIN NETWORK Satish Nukala, Northeastern University, Boston, MA 025, (67)-373-7635, snukala@coe.neu.edu Surendra M. Gupta*, Northeastern University, Boston,

More information

A Nondominated Sorting Genetic Algorithm for Sustainable Reverse Logistics Network Design

A Nondominated Sorting Genetic Algorithm for Sustainable Reverse Logistics Network Design Proceedings of the 214 International Conference on Industrial Engineering and Operations Management Bali, Indonesia, January 7 9, 214 A Nondominated Sorting Genetic Algorithm for Sustainable Reverse Logistics

More information

Supply chain design and planning accounting for the Triple Bottom Line

Supply chain design and planning accounting for the Triple Bottom Line Krist V. Gernaey, Jakob K. Huusom and Rafiqul Gani (Eds.), 12th International Symposium on Process Systems Engineering and 25th European Symposium on Computer Aided Process Engineering. 31 May 4 June 2015,

More information

Yuanjie He. 2011- Associate Professor, Technology and Operations Management Department, California State Polytechnic University, Pomona

Yuanjie He. 2011- Associate Professor, Technology and Operations Management Department, California State Polytechnic University, Pomona Yuanjie He 3801 W. Temple Ave, Pomona, CA 91768 Office: (909) 869-2458 Technology and Operations Management Department College of Business Administration E-mail: he@cpp.edu Professional Experience 2011-

More information

BHARATENDU SRIVASTAVA

BHARATENDU SRIVASTAVA BHARATENDU SRIVASTAVA Department of Management College of Business Administration Marquette University P.O. Box 1881, Milwaukee, WI 53201-1881 (414) 288-3408 bharat.srivastava@marquette.edu EDUCATION Ph.

More information

International Association of Scientific Innovation and Research (IASIR) (An Association Unifying the Sciences, Engineering, and Applied Research)

International Association of Scientific Innovation and Research (IASIR) (An Association Unifying the Sciences, Engineering, and Applied Research) International Association of Scientific Innovation and Research (IASIR) (An Association Unifying the Sciences, Engineering, and Applied Research) ISSN (Print): 2279-0020 ISSN (Online): 2279-0039 International

More information

Measuring Performance of Reverse Supply Chains in a Computer Hardware Company

Measuring Performance of Reverse Supply Chains in a Computer Hardware Company Measuring Performance of Reverse Supply Chains in a Computer Hardware Company M.B. Butar Butar, D. Sanders, G. Tewkesbury 1 School of Engineering, University of Portsmouth, Portsmouth, United Kingdom (mde80356@myport.ac.uk)

More information

On-line supplement On the Integrated Production and Distribution Problem with Bi-directional Flows

On-line supplement On the Integrated Production and Distribution Problem with Bi-directional Flows On-line supplement On the Integrated Production and Distribution Problem with Bi-directional Flows Lei Lei Department of Supply Chain Management and Marketing Sciences, Rutgers University, 180 University

More information

ENERGY-EFFICIENT TASK SCHEDULING ALGORITHMS FOR CLOUD DATA CENTERS

ENERGY-EFFICIENT TASK SCHEDULING ALGORITHMS FOR CLOUD DATA CENTERS ENERGY-EFFICIENT TASK SCHEDULING ALGORITHMS FOR CLOUD DATA CENTERS T. Jenifer Nirubah 1, Rose Rani John 2 1 Post-Graduate Student, Department of Computer Science and Engineering, Karunya University, Tamil

More information

Closed-Loop Supply Chains: Practice and Potential

Closed-Loop Supply Chains: Practice and Potential Closed-Loop Supply Chains: Practice and Potential V. Daniel R. Guide, Jr. Luk N. Van Wassenhove Pennsylvania State University INSEAD 2005 Guide & Van Wassenhove 1 Migrant child from Hunan province sits

More information

A LOT-SIZING PROBLEM WITH TIME VARIATION IMPACT IN CLOSED-LOOP SUPPLY CHAINS

A LOT-SIZING PROBLEM WITH TIME VARIATION IMPACT IN CLOSED-LOOP SUPPLY CHAINS A LOT-SIZING PROBLEM WITH TIME VARIATION IMPACT IN CLOSED-LOOP SUPPLY CHAINS Aya Ishigaki*, ishigaki@rs.noda.tus.ac.jp; Tokyo University of Science, Japan Tetsuo Yamada, tyamada@uec.ac.jp; The University

More information

CURRICULUM VITAE ÖZNUR ÖZDEMİR

CURRICULUM VITAE ÖZNUR ÖZDEMİR CURRICULUM VITAE ÖZNUR ÖZDEMİR Office Address-Akdeniz University, Faculty of Economics and Administrative Sciences, Department of Business Administration, Dumlupinar Boulevard, 07058, Antalya, Turkiye

More information

A simulation study on supply chain performance with uncertainty using contract. Creative Commons: Attribution 3.0 Hong Kong License

A simulation study on supply chain performance with uncertainty using contract. Creative Commons: Attribution 3.0 Hong Kong License Title A simulation study on supply chain performance with uncertainty using contract Author(s) Chan, FTS; Chan, HK Citation IEEE International Symposium on Intelligent Control Proceedings, the 13th Mediterrean

More information

Green Supply Chain Management Practices: A Case Study from Indian Manufacturing Industry

Green Supply Chain Management Practices: A Case Study from Indian Manufacturing Industry Green Supply Chain Management Practices: A Case Study from Indian Manufacturing Industry Mr. Adarsha K Asst-Prof, Dept of MBA & Research Centre East West Institute of Technology, Bangalore Email ID: adarshgowda83@yahoo.co.in

More information

Curriculum Vitae. Xinghao (Shaun) Yan

Curriculum Vitae. Xinghao (Shaun) Yan Curriculum Vitae Xinghao (Shaun) Yan Management Science Ivey Business School 1255 Western Road Western University London, Ontario N6G-0N1 Website: http://www.ivey.uwo.ca/faculty/directory/shaun-yan/ Phone:

More information

Editorial Mathematical Modeling Research in Fashion and Textiles Supply Chains and Operational Control Systems

Editorial Mathematical Modeling Research in Fashion and Textiles Supply Chains and Operational Control Systems Mathematical Problems in Engineering Volume 2013, Article ID 470567, 4 pages http://dx.doi.org/10.1155/2013/470567 Editorial Mathematical Modeling Research in Fashion and Textiles Supply Chains and Operational

More information

Closed-loop supply chain network configuration by a multi-objective mathematical model. Saman Hassanzadeh Amin and Guoqing Zhang*

Closed-loop supply chain network configuration by a multi-objective mathematical model. Saman Hassanzadeh Amin and Guoqing Zhang* Int. J. Business Performance and Supply Chain Modelling, Vol. 6, No. 1, 2014 1 Closed-loop supply chain network configuration by a multi-objective mathematical model Saman Hassanzadeh Amin and Guoqing

More information

Price Decision Analysis of Closed-Loop Supply Chain under third-party

Price Decision Analysis of Closed-Loop Supply Chain under third-party Price Decision Analysis of losed-loop Supply hain under third-party ecyclers ompetition Kai ao, Jie Lin Price Decision Analysis of losed-loop Supply hain under third-party ecyclers ompetition 1 Kai ao,

More information

High-Mix Low-Volume Flow Shop Manufacturing System Scheduling

High-Mix Low-Volume Flow Shop Manufacturing System Scheduling Proceedings of the 14th IAC Symposium on Information Control Problems in Manufacturing, May 23-25, 2012 High-Mix Low-Volume low Shop Manufacturing System Scheduling Juraj Svancara, Zdenka Kralova Institute

More information

Alternative Selection for Green Supply Chain Management: A Fuzzy TOPSIS Approach

Alternative Selection for Green Supply Chain Management: A Fuzzy TOPSIS Approach Alternative Selection for Green Supply Chain Management: A Fuzzy TOPSIS Approach Mohit Tyagi #, Pradeep Kumar, and Dinesh Kumar # mohitmied@gmail.com,kumarfme@iitr.ernet.in, dinesfme@iitr.ernet.in MIED,

More information

Faculty & Research. Working Paper Series. The Challenge of Closed-Loop Supply Chains. D. Guide T. Harrison and. L. Van Wassenhove 2003/62/TM

Faculty & Research. Working Paper Series. The Challenge of Closed-Loop Supply Chains. D. Guide T. Harrison and. L. Van Wassenhove 2003/62/TM Faculty & Research The Challenge of Closed-Loop Supply Chains by D. Guide T. Harrison and L. Van Wassenhove 2003/62/TM Working Paper Series The Challenge of Closed-Loop Supply Chains V. Daniel R. Guide,

More information

Scientific publications of Dr. Giovanni Celano, PhD. International Conferences Updated to November 2011

Scientific publications of Dr. Giovanni Celano, PhD. International Conferences Updated to November 2011 [1] G. Celano and S. Fichera, 1999, Statistical economic design of a x control chart, 5th Intern. Conf. on Advanced Manufacturing Systems and Technology (AMST00), pp. 875-882, Udine (Italy), June 3-4,

More information

Abstract. 1. Introduction. Caparica, Portugal b CEG, IST-UTL, Av. Rovisco Pais, 1049-001 Lisboa, Portugal

Abstract. 1. Introduction. Caparica, Portugal b CEG, IST-UTL, Av. Rovisco Pais, 1049-001 Lisboa, Portugal Ian David Lockhart Bogle and Michael Fairweather (Editors), Proceedings of the 22nd European Symposium on Computer Aided Process Engineering, 17-20 June 2012, London. 2012 Elsevier B.V. All rights reserved.

More information

Model, Analyze and Optimize the Supply Chain

Model, Analyze and Optimize the Supply Chain Model, Analyze and Optimize the Supply Chain Optimize networks Improve product flow Right-size inventory Simulate service Balance production Optimize routes The Leading Supply Chain Design and Analysis

More information

STRATEGIC CAPACITY PLANNING USING STOCK CONTROL MODEL

STRATEGIC CAPACITY PLANNING USING STOCK CONTROL MODEL Session 6. Applications of Mathematical Methods to Logistics and Business Proceedings of the 9th International Conference Reliability and Statistics in Transportation and Communication (RelStat 09), 21

More information

SU Qiang Professor ---------------------------------------------------------------------------------------------------------------------------------

SU Qiang Professor --------------------------------------------------------------------------------------------------------------------------------- SU Qiang Professor PhD Advisor Department: Department of Management Science and Engineering Email: suq@tongji.edu.cn Office Phone: +86-21-65981443 ---------------------------------------------------------------------------------------------------------------------------------

More information

Vishal V. Agrawal. McDonough School of Business, Georgetown University Assistant Professor, Operations and Information Management, 2010-present

Vishal V. Agrawal. McDonough School of Business, Georgetown University Assistant Professor, Operations and Information Management, 2010-present Vishal V. Agrawal McDonough School of Business Georgetown University 37 th & O Streets, Washington, DC 20057 Vishal.Agrawal@georgetown.edu Phone: (202) 687-2192 http://faculty.msb.edu/va64/ Academic Appointment

More information

9700 South Cass Avenue, Lemont, IL 60439 URL: www.mcs.anl.gov/ fulin

9700 South Cass Avenue, Lemont, IL 60439 URL: www.mcs.anl.gov/ fulin Fu Lin Contact information Education Work experience Research interests Mathematics and Computer Science Division Phone: (630) 252-0973 Argonne National Laboratory E-mail: fulin@mcs.anl.gov 9700 South

More information

The Relationship between Manufacturing System Performance and Green Practices in Supply Chain Management

The Relationship between Manufacturing System Performance and Green Practices in Supply Chain Management The Relationship between Manufacturing System Performance and Green Practices in Supply Chain Management Wan Hasrulnizzam Wan Mahmood, Mohd Nizam Ab Rahman, Baba Md Deros Abstract Green supply chain management

More information

Research on the application of the internet of things in Reverse Logistics Information Management

Research on the application of the internet of things in Reverse Logistics Information Management Journal of Industrial Engineering and Management JIEM, 2013 6(4): 963-973 Online ISSN: 2013-0953 Print ISSN: 2013-8423 http://dx.doi.org/10.3926/jiem.793 Research on the application of the internet of

More information

Closed-loop Supply Chain with Remanufacturing: A Literature Review

Closed-loop Supply Chain with Remanufacturing: A Literature Review International Conference on IML 2012 Closed-loop Supply Chain with Remanufacturing: A Literature Review Gan Shu San 1,2, I Nyoman Pujawan 1, and Suparno 1 1 Department of Industrial Engineering Faculty

More information

AN EFFICIENT LOAD BALANCING APPROACH IN CLOUD SERVER USING ANT COLONY OPTIMIZATION

AN EFFICIENT LOAD BALANCING APPROACH IN CLOUD SERVER USING ANT COLONY OPTIMIZATION AN EFFICIENT LOAD BALANCING APPROACH IN CLOUD SERVER USING ANT COLONY OPTIMIZATION Shanmuga Priya.J 1, Sridevi.A 2 1 PG Scholar, Department of Information Technology, J.J College of Engineering and Technology

More information

Curriculum Vitae. B.M.T. Lin, NCTU, TW

Curriculum Vitae. B.M.T. Lin, NCTU, TW Curriculum Vitae Bertrand Miao-Tsong Lin ( 林 妙 聰 ) Gender: Male Marital status: Married (1 son and 1 daughter) Date of Birth: May 4, 1964 Nationality: Taiwan, ROC Affiliation: Institute of Information

More information

Circular Economy and Life Cycle Management

Circular Economy and Life Cycle Management II Workshop Tecnológico Design for Environment (DfE) SENAI CNI São Paulo - 03/12/2014 Circular Economy and Life Cycle Management Prof. Aldo Roberto Ometto NUMA Research Center > São Carlos Engineering

More information

Reverse Logistics Network in Uncertain Environment

Reverse Logistics Network in Uncertain Environment NFORMATON Volume 15, Number 12, pp.380-385 SSN 1343-4500 c 2012 nternational nformation nstitute Reverse Logistics Network in Uncertain Environment ianjun Liu, Yufu Ning, Xuedou Yu Department of Computer

More information

CONCEPTUAL MODEL OF MULTI-AGENT BUSINESS COLLABORATION BASED ON CLOUD WORKFLOW

CONCEPTUAL MODEL OF MULTI-AGENT BUSINESS COLLABORATION BASED ON CLOUD WORKFLOW CONCEPTUAL MODEL OF MULTI-AGENT BUSINESS COLLABORATION BASED ON CLOUD WORKFLOW 1 XINQIN GAO, 2 MINGSHUN YANG, 3 YONG LIU, 4 XIAOLI HOU School of Mechanical and Precision Instrument Engineering, Xi'an University

More information

Software for Supply Chain Design and Analysis

Software for Supply Chain Design and Analysis Software for Supply Chain Design and Analysis Optimize networks Improve product flow Position inventory Simulate service Balance production Refine routes The Leading Supply Chain Design and Analysis Application

More information

CONTROL SYSTEMS, ROBOTICS AND AUTOMATION Vol. XVI - Fault Accomodation Using Model Predictive Methods - Jovan D. Bošković and Raman K.

CONTROL SYSTEMS, ROBOTICS AND AUTOMATION Vol. XVI - Fault Accomodation Using Model Predictive Methods - Jovan D. Bošković and Raman K. FAULT ACCOMMODATION USING MODEL PREDICTIVE METHODS Scientific Systems Company, Inc., Woburn, Massachusetts, USA. Keywords: Fault accommodation, Model Predictive Control (MPC), Failure Detection, Identification

More information

An ACO Approach to Solve a Variant of TSP

An ACO Approach to Solve a Variant of TSP An ACO Approach to Solve a Variant of TSP Bharat V. Chawda, Nitesh M. Sureja Abstract This study is an investigation on the application of Ant Colony Optimization to a variant of TSP. This paper presents

More information

11 Smart and Sustainable Supply Chains

11 Smart and Sustainable Supply Chains 11 Smart and Sustainable Supply Chains 1 11 Smart and Sustainable Supply Chains Jo A.E.E. van Nunen, Rob A. Zuidwijk, Hans M. Moonen RSM, Erasmus University Rotterdam, PO Box 1738, 3000 DR Rotterdam, The

More information

Indian E-Retail Congress 2013

Indian E-Retail Congress 2013 The Retail Track The Omni Channel Retail Supply Chain Indian E-Retail Congress 2013 Subhendu Roy Principal Consumer Industries and Retail Practice 15 February, 2013 Disclaimer This document is exclusively

More information

Standardization of Components, Products and Processes with Data Mining

Standardization of Components, Products and Processes with Data Mining B. Agard and A. Kusiak, Standardization of Components, Products and Processes with Data Mining, International Conference on Production Research Americas 2004, Santiago, Chile, August 1-4, 2004. Standardization

More information

Simulation-based Optimization Approach to Clinical Trial Supply Chain Management

Simulation-based Optimization Approach to Clinical Trial Supply Chain Management 20 th European Symposium on Computer Aided Process Engineering ESCAPE20 S. Pierucci and G. Buzzi Ferraris (Editors) 2010 Elsevier B.V. All rights reserved. Simulation-based Optimization Approach to Clinical

More information

Performance Analysis of a Selected System in a Process Industry

Performance Analysis of a Selected System in a Process Industry Research Article International Journal of Current Engineering and Technology E-ISSN 2277 4106, P-ISSN 2347-5161 2014 INPRESSCO, All Rights Reserved Available at http://inpressco.com/category/ijcet Performance

More information

Current Scenario of Green Supply Chain and logistics Management practices in the Indian Industries: A survey study

Current Scenario of Green Supply Chain and logistics Management practices in the Indian Industries: A survey study Current Scenario of Green Supply Chain and logistics Management practices in the Indian Industries: A survey study Prof. Sarbjit Singh, Associate Professor, Department of Industrial & Production Engineering,

More information

A Genetic Algorithm Approach for Solving a Flexible Job Shop Scheduling Problem

A Genetic Algorithm Approach for Solving a Flexible Job Shop Scheduling Problem A Genetic Algorithm Approach for Solving a Flexible Job Shop Scheduling Problem Sayedmohammadreza Vaghefinezhad 1, Kuan Yew Wong 2 1 Department of Manufacturing & Industrial Engineering, Faculty of Mechanical

More information

Making Supply Chain Green!

Making Supply Chain Green! Making Supply Chain Green! Dr. Ruhi Bakhare Assistant professor, Dr. Ambedkar Institute of Management Studies and Research, Nagpur E-mail: ruhibakhare@rediffmail.com ABSTRACT Now everybody talk about global

More information

Curriculum Vitae. 1 Person Dr. Horst O. Bunke, Prof. Em. Date of birth July 30, 1949 Place of birth Langenzenn, Germany Citizenship Swiss and German

Curriculum Vitae. 1 Person Dr. Horst O. Bunke, Prof. Em. Date of birth July 30, 1949 Place of birth Langenzenn, Germany Citizenship Swiss and German Curriculum Vitae 1 Person Name Dr. Horst O. Bunke, Prof. Em. Date of birth July 30, 1949 Place of birth Langenzenn, Germany Citizenship Swiss and German 2 Education 1974 Dipl.-Inf. Degree from the University

More information

Research Article Two-Period Inventory Control with Manufacturing and Remanufacturing under Return Compensation Policy

Research Article Two-Period Inventory Control with Manufacturing and Remanufacturing under Return Compensation Policy Discrete Dynamics in Nature and Society Volume 2013, Article ID 871286, 8 pages http://dx.doi.org/10.1155/2013/871286 Research Article Two-Period Inventory Control with Manufacturing and Remanufacturing

More information

Optimization of Preventive Maintenance Scheduling in Processing Plants

Optimization of Preventive Maintenance Scheduling in Processing Plants 18 th European Symposium on Computer Aided Process Engineering ESCAPE 18 Bertrand Braunschweig and Xavier Joulia (Editors) 2008 Elsevier B.V./Ltd. All rights reserved. Optimization of Preventive Maintenance

More information

ARVIND JAYANT Associate Professor & Head

ARVIND JAYANT Associate Professor & Head EVALUATION OF EOL/USED CELL PHONES MANAGEMENT & DISPOSAL ALTERNATIVES: AN ANP AND BALANCED SCORECARD APPROACH By ARVIND JAYANT Associate Professor & Head Department of Mechanical Engineering Sant Longowal

More information

Optimization of PID parameters with an improved simplex PSO

Optimization of PID parameters with an improved simplex PSO Li et al. Journal of Inequalities and Applications (2015) 2015:325 DOI 10.1186/s13660-015-0785-2 R E S E A R C H Open Access Optimization of PID parameters with an improved simplex PSO Ji-min Li 1, Yeong-Cheng

More information

Self-organized Multi-agent System for Service Management in the Next Generation Networks

Self-organized Multi-agent System for Service Management in the Next Generation Networks PROCEEDINGS OF THE WORKSHOP ON APPLICATIONS OF SOFTWARE AGENTS ISBN 978-86-7031-188-6, pp. 18-24, 2011 Self-organized Multi-agent System for Service Management in the Next Generation Networks Mario Kusek

More information

HMLV Manufacturing Systems Simulation Analysis Using the Database Interface

HMLV Manufacturing Systems Simulation Analysis Using the Database Interface HMLV Manufacturing Systems Simulation Analysis Using the Database Interface JURAJ ŠVANČARA Faculty of Electrical Engineering and Information Technology Slovak University of Technology in Bratislava Ilkovicova

More information

International Graduate Degree Program in EECS on Communications, Control, and Signal Processing

International Graduate Degree Program in EECS on Communications, Control, and Signal Processing College of Electrical Engineering and Computer Science, National Taipei University of Technology (Academic Year 2009~2010) International Graduate Degree Program in EECS on Communications, Control, and

More information

Kenneth W. Harrison. Assistant Professor, Department of Civil and Environmental Engineering, University of South Carolina

Kenneth W. Harrison. Assistant Professor, Department of Civil and Environmental Engineering, University of South Carolina Kenneth W. Harrison Title Assistant Professor, Department of Civil and Environmental Engineering, University of South Carolina Education University of Illinois at Urbana-Champaign Civil Engineering B.S.

More information

Electronic Commerce Research in Latest Decade: A Literature Review

Electronic Commerce Research in Latest Decade: A Literature Review International Journal of Electronic Commerce Studies Vol.1, No.1, pp.1-14, 2010 Electronic Commerce Research in Latest Decade: A Literature Review Chih-Chien Wang National Taipei University, Taipei County,

More information

Z. JANE GU EMPLOYMENT

Z. JANE GU EMPLOYMENT Z. JANE GU Marketing Department University of Connecticut 2100 Hillside Road, UNIT 1041 Storrs, CT, 06269 Jane.Gu@business.uconn.edu Office: (860) 486-0493 EMPLOYMENT Assistant Professor of Marketing,

More information

T&E. Where Business Travelers Spend Money

T&E. Where Business Travelers Spend Money T&E Where Business Travelers Spend Money Contents Introduction 3 Key Findings 4 Top Expensive Cities for Business Travel 5 International 5 U.S. 5 Top 10 Spend Categories 6 International 6 U.S. 7 Most Visited

More information

A Testing Technique of Microgrid EMS using the Hardware-in-the Loop Simulation (HILS) System

A Testing Technique of Microgrid EMS using the Hardware-in-the Loop Simulation (HILS) System , pp.53-60 http://dx.doi.org/10.14257/ijeic.2014.5.2.04 A Testing Technique of Microgrid EMS using the Hardware-in-the Loop Simulation (HILS) System Ji-Hye Lee, Nam-Dae Kim and Hak-Man Kim Incheon National

More information

IT for Green: Impacting the Triple Bottom Line - People, Planet, and Profits. Webcast May 21, 2008

IT for Green: Impacting the Triple Bottom Line - People, Planet, and Profits. Webcast May 21, 2008 IT for Green: Impacting the Triple Bottom Line - People, Planet, and Profits Webcast May 21, 2008 Webcast Logistics Audio lines are muted until Q&A session Submit your questions via the Live Meeting Chat

More information

DESIGNING A CLOSED-LOOP SUPPLY CHAIN FOR ALUMINUM ENGINE MANUFACTURING

DESIGNING A CLOSED-LOOP SUPPLY CHAIN FOR ALUMINUM ENGINE MANUFACTURING DESIGNING A CLOSED-LOOP SUPPLY CHAIN FOR ALUMINUM ENGINE MANUFACTURING R.S. Lashkari and Yi Duan Department of Industrial and Manufacturing Systems ering University of Windsor 40 Sunset Ave, Windsor, ON

More information

Reducing Cycle Times and Work in Process Management Costs: Aerospace and Defense Industry

Reducing Cycle Times and Work in Process Management Costs: Aerospace and Defense Industry Reducing Cycle Times and Work in Process Management Costs: Aerospace and Defense Industry CYCLE TIMES AND COST CHALLENGES In Aerospace and Defense environments, the longer work stays in process, the longer

More information

Department of Industrial and Information Management

Department of Industrial and Information Management Department of Industrial and Information Management Web site:http://www.iim.ncku.edu.tw/main.php Phone:886-6-2757575-53100 Fax:886-6-2362162 E-MAIL:em53100@email.ncku.edu.tw BRIEF HISTORY Department of

More information

School of Computer Science

School of Computer Science DDSS:Dynamic Dedicated Servers Scheduling for Multi Priority Level Classes in Cloud Servers Husnu S. Narman, Md. Shohrab Hossain, Mohammed Atiquzzaman TR-OU-TNRL-13- Sep 13 Telecommunication & Network

More information

Sustainable Solutions. Switch to future thinking

Sustainable Solutions. Switch to future thinking Switch to future thinking Increased global competition, rapid advances in technology, risks from natural disasters, resource shortages today s business leaders must adapt to operating in a changing world,

More information

SELVAPRABU (SELVA) NADARAJAH

SELVAPRABU (SELVA) NADARAJAH EDUCATION SELVAPRABU (SELVA) NADARAJAH College of Business Administration University of Illinois at Chicago 601 S. Morgan Street Chicago IL 60607 selvan@uic.edu http://selvan.people.uic.edu, May 2014 PhD

More information

Keywords: Forward Logistics, Reverse Logistics, Supply Chain Management, Mathematical Programming, Beverage Industry.

Keywords: Forward Logistics, Reverse Logistics, Supply Chain Management, Mathematical Programming, Beverage Industry. A Model for Coordination of Production Planning, Forward and Reverse Logistics Management in a Multi-product and Multiplant Environment, with Reusable Bottles Constraints Parra Peña J 1, Vicens-Salort

More information

TOURISM DEMAND FORECASTING USING A NOVEL HIGH-PRECISION FUZZY TIME SERIES MODEL. Ruey-Chyn Tsaur and Ting-Chun Kuo

TOURISM DEMAND FORECASTING USING A NOVEL HIGH-PRECISION FUZZY TIME SERIES MODEL. Ruey-Chyn Tsaur and Ting-Chun Kuo International Journal of Innovative Computing, Information and Control ICIC International c 2014 ISSN 1349-4198 Volume 10, Number 2, April 2014 pp. 695 701 OURISM DEMAND FORECASING USING A NOVEL HIGH-PRECISION

More information

Ambit Asset/ Ambit BancWare Focus ALM

Ambit Asset/ Ambit BancWare Focus ALM Ambit Asset/ Liability Management Ambit BancWare Focus ALM Better information and analysis means better decisions. Managing the risk on the balance sheet today requires diligence and flexible, scalable

More information

Kaiquan Xu, Associate Professor, Nanjing University. Kaiquan Xu

Kaiquan Xu, Associate Professor, Nanjing University. Kaiquan Xu Kaiquan Xu Marketing & ebusiness Department, Business School, Nanjing University Email: xukaiquan@nju.edu.cn Tel: +86-25-83592129 Employment Associate Professor, Marketing & ebusiness Department, Nanjing

More information

Hierarchical Facility Location for the Reverse Logistics Network Design under Uncertainty

Hierarchical Facility Location for the Reverse Logistics Network Design under Uncertainty Journal of Uncertain Systems Vol.8, No.4, pp.55-70, 04 Online at: www.jus.org.uk Hierarchical Facility Location for the Reverse Logistics Network Design under Uncertainty Ke Wang, Quan Yang School of Management,

More information

Outsourcing Analysis in Closed-Loop Supply Chains for Hazardous Materials

Outsourcing Analysis in Closed-Loop Supply Chains for Hazardous Materials Outsourcing Analysis in Closed-Loop Supply Chains for Hazardous Materials Víctor Manuel Rayas Carbajal Tecnológico de Monterrey, campus Toluca victor.rayas@invitados.itesm.mx Marco Antonio Serrato García

More information

An Inventory Model with Recovery and Environment Considerations

An Inventory Model with Recovery and Environment Considerations An Inventory Model with Recovery and Environment Considerations Marthy S. García-Alvarado Marc Paquet Amin Chaabane January 2014 CIRRELT-2014-03 Marthy S. García-Alvarado 1,2,*, Marc Paquet 1,2, Amin Chaabane

More information

A Control Method of Traffic Flow Based on Region Coordination

A Control Method of Traffic Flow Based on Region Coordination 3rd International Conference on Management, Education, Information and Control (MEICI 2015) A Control Method of Traffic Flow Based on Region Coordination Wuxiong Xu 1, a,*, Dong Zhong 1, b, Siqing Wu 1,

More information

The Implementation of Green Supply Chain Management Practices in Automobile Industry

The Implementation of Green Supply Chain Management Practices in Automobile Industry The Implementation of Green Supply Chain Management Practices in Automobile Industry Goshen Stephen 1, E. Ravi Kumar 2 Second Year UG Student, Department of Mechanical Engineering, Alpha College of Engineering,

More information

London Business School Phone: +0044 (0)20 7000 8806. NW1 4SA, United Kingdom Webpage: http://faculty.london.edu/sayang/

London Business School Phone: +0044 (0)20 7000 8806. NW1 4SA, United Kingdom Webpage: http://faculty.london.edu/sayang/ S. Alex Yang Version July 2016 Contact Information Research Interests London Business School Phone: +0044 (0)20 7000 8806 Regent s Park, London Email: sayang@london.edu NW1 4SA, United Kingdom Webpage:

More information

Revenue Protection & Distribution System Analytics - Using in memory computing & big data analytics

Revenue Protection & Distribution System Analytics - Using in memory computing & big data analytics Revenue Protection & Distribution System Analytics - Using in memory computing & big data analytics Sanjeev Kumar Singh Sr. Consultant Utilities Solutions Mahindra Satyam Contact (M) +91 8106720202 (O)

More information

Case study of a batch-production/inventory system E.M.M. Winands 1, A.G. de Kok 2 and C. Timpe 3

Case study of a batch-production/inventory system E.M.M. Winands 1, A.G. de Kok 2 and C. Timpe 3 Case study of a batch-production/inventory system E.M.M. Winands 1, A.G. de Kok 2 and C. Timpe 3 The plant of BASF under consideration consists of multiple parallel production lines, which produce multiple

More information

Low Carbon Emission Supply Network Design and a case in Chinese ICT industry

Low Carbon Emission Supply Network Design and a case in Chinese ICT industry Low Carbon Emission Supply Network Design and a case in Chinese ICT industry Jialun Hu Centre for International Manufacturing Institute for Manufacturing, University of Cambridge jh693@cam.ac.uk Outline

More information

Curriculum Vitae. ChunI Chen

Curriculum Vitae. ChunI Chen Curriculum Vitae ChunI Chen Title and Department Professor, Department of Industrial Management Director, Center of General Education Education Ph.D. in Mechanical Engineering, National Cheng Kung University,

More information

Demand Forecasting Optimization in Supply Chain

Demand Forecasting Optimization in Supply Chain 2011 International Conference on Information Management and Engineering (ICIME 2011) IPCSIT vol. 52 (2012) (2012) IACSIT Press, Singapore DOI: 10.7763/IPCSIT.2012.V52.12 Demand Forecasting Optimization

More information

A Hybrid Genetic Algorithm Approach for Optimizing Dynamic Multi-Commodity Supply Chains

A Hybrid Genetic Algorithm Approach for Optimizing Dynamic Multi-Commodity Supply Chains 1 A Hybrid Genetic Algorithm Approach for Optimizing Dynamic Multi-Commodity Supply Chains H. Abbas * M. Hussein M. Etman Mechanical Engineering Dept. Helwan University Faculty of Engineering Cairo Egypt

More information

Pareto optimization for informed decision making in supply chain management

Pareto optimization for informed decision making in supply chain management 015-0393 Pareto optimization for informed decision making in supply chain management S. Afshin Mansouri 1 and David Gallear Brunel Business School, Brunel University, Uxbridge, Middlesex UB8 3PH, United

More information

COMPUTATIONIMPROVEMENTOFSTOCKMARKETDECISIONMAKING MODELTHROUGHTHEAPPLICATIONOFGRID. Jovita Nenortaitė

COMPUTATIONIMPROVEMENTOFSTOCKMARKETDECISIONMAKING MODELTHROUGHTHEAPPLICATIONOFGRID. Jovita Nenortaitė ISSN 1392 124X INFORMATION TECHNOLOGY AND CONTROL, 2005, Vol.34, No.3 COMPUTATIONIMPROVEMENTOFSTOCKMARKETDECISIONMAKING MODELTHROUGHTHEAPPLICATIONOFGRID Jovita Nenortaitė InformaticsDepartment,VilniusUniversityKaunasFacultyofHumanities

More information

Curriculum Vitae Timothy R. Colburn Associate Professor Department of Computer Science University of Minnesota, Duluth Duluth, MN 55812

Curriculum Vitae Timothy R. Colburn Associate Professor Department of Computer Science University of Minnesota, Duluth Duluth, MN 55812 Curriculum Vitae Timothy R. Colburn Associate Professor Department of Computer Science University of Minnesota, Duluth Duluth, MN 55812 email: tcolburn@d.umn.edu web: www.d.umn.edu/~tcolburn Education

More information

Department of Industrial Engineering and Logistics Management

Department of Industrial Engineering and Logistics Management Department of Industrial Engineering and Logistics Management Department of Industrial Engineering and Logistics Management Head of Department: Fugee TSUNG, Professor of Industrial Engineering and Logistics

More information

Curriculum Vitae - Helena Carvalho

Curriculum Vitae - Helena Carvalho Curriculum Vitae - Helena Carvalho January 2013 Full name: Helena Maria Lourenço Carvalho Remigio Short name: Helena Carvalho Date and country of birth: 16 May 1977, Portugal Nationality: Portuguese E-mail:

More information

Global Real Estate Outlook

Global Real Estate Outlook Global Real Estate Outlook August 2014 The Hierarchy of Economic Performance, 2014-2015 China Indonesia India Poland South Korea Turkey Australia Mexico United Kingdom Sweden United States Canada South

More information

Dr. Sooksan Kantabutra Chief Researcher, Leadership Research Group, College of Management, Mahidol University

Dr. Sooksan Kantabutra Chief Researcher, Leadership Research Group, College of Management, Mahidol University 1. Education Doctor of Philosophy (leadership & strategy), Macquarie Graduate School of Management 1, Macquarie University, NSW, Australia. Master of Arts in management research methods, Macquarie Graduate

More information

APPLICATION OF GENETIC ALGORITHMS IN INVENTORY MANAGEMENT

APPLICATION OF GENETIC ALGORITHMS IN INVENTORY MANAGEMENT DAAAM INTERNATIONAL SCIENTIFIC BOOK 2010 pp. 245-258 CHAPTER 25 APPLICATION OF GENETIC ALGORITHMS IN INVENTORY MANAGEMENT DANIA, W.A.P. Abstract: Inventory cost is a main component of total logistic costs.

More information

Transportation and Urban Systems

Transportation and Urban Systems North Dakota State University 1 Transportation and Urban Systems Program and Application Information Program Director: Dr. Denver Tolliver Assistant to the Director of Educational Programs: Jody Bohn Baldock

More information

Optimization of the physical distribution of furniture. Sergey Victorovich Noskov

Optimization of the physical distribution of furniture. Sergey Victorovich Noskov Optimization of the physical distribution of furniture Sergey Victorovich Noskov Samara State University of Economics, Soviet Army Street, 141, Samara, 443090, Russian Federation Abstract. Revealed a significant

More information

GREEN SUPPLY CHAIN MANAGEMENT IN DEVELOPING COUNTRIES

GREEN SUPPLY CHAIN MANAGEMENT IN DEVELOPING COUNTRIES GREEN SUPPLY CHAIN MANAGEMENT IN DEVELOPING COUNTRIES EM Ojo 1, C Mbohwa 2 and ET Akinlabi 3 13 Department of Mechanical Engineering Science, University Of Johannesburg, Johannesburg, South Africa 2 Department

More information

Nan Yang. Education. Columbia University, Graduate School of Business Master of Philosophy in Decision, Risk and Operations, February 2003

Nan Yang. Education. Columbia University, Graduate School of Business Master of Philosophy in Decision, Risk and Operations, February 2003 Nan Yang Washington University, Olin Business School, Campus Box 1156 One Brookings Drive, St. Louis, MO 63130-4899, USA Phone: (314) 935 4732; Email: yangn@wustl.edu Education Columbia University, Graduate

More information