Stretch Wrapper GL 1300 / GL 1300 CTS Options List

Size: px
Start display at page:

Download "Stretch Wrapper GL 1300 / GL 1300 CTS Options List"

Transcription

1 WRAPPING TECHNOLOGY Stretch Wrapper GL 1300 / GL 1300 CTS Options List V. 1.12

2 Rights to make any technical modifi cations are reserved. This manual must not be copied or otherwise duplicated. Nor may its content be amended or passed on without our written permission. All rights reserved. Copyright by Cyklop Teknik AB Burseryd 2010 /PBE Rättigheten att göra tekniska ändringar förbehålles. Denna manual får inte kopieras eller på annat sätt dubbleras. Inte heller får dess innehåll ändras eller vidarebefordras utan vårt skriftliga medgivande. Alla rättigheter reserverade. Copyright by Cyklop Teknik AB Burseryd 2010 /PBE 2 SE+EN

3 Part. No. Description / Benämning Page/Sida GL 1300 standard Basically a GL 300 CU with driven conveyor 4 GL 1300 CTS Complete line with GL conveyors + safety net Custom color Custom color for chassis and table Lightbeam, 1 pc Lightbeams, 2 pcs Lightbeams, 3 pcs Sick lightbeam Top plate, rectangular Frequency controlled rectangular top platen Top plate, round Frequency controlled round top platen Extended mast top plate Specify load height when ordering, up to 3000mm Galvanized bottom unit 6 Customized mast height Specify load height when ordering, up to 3000mm Welding unit 6 Point welding unit Cabinet prepared for lightbeams Cabinet prepared with hardware for two sick lightbeams Driven conveyor, 1 pc incl freq control Driven conveyor, 2 pcs incl freq control Driven conveyor, 3 pcs incl freq control Driven conveyor, 4 pcs incl freq control Conveyor: l=1400 mm x w=950 mm + pallet indicator conveyor: l=1400 mm x w=950 mm + pallet indicator conveyor: l=1400 mm x w=950 mm + pallet indicator conveyor: l=1400 mm x w=950 mm + pallet indicator Pallet guiding discs 4 Guiding discs Net guarding around machine x 1 door Net guarding around machine x 2 doors Guarding for machine & in or out conveyor, incl one door Guarding for machine & in or out conveyor, incl two doors Collision protection for conveyor Protect the conveyor when transport in/out. 8 Air conditioned electrical cab Cooling capacity 640w Active antistatic Passive antistatic Knife Swan 10 pcs Kniv Svan 10 st 9 START KIT STRETCH FILM 9 4 Rolls of high quality stretch fi lm 4 rullar sträck fi lm av hög kvalité 1 Pallet of high quality stretch fi lm (30 rolls) 1 pall med sträck fi lm av hög kvalité 7 3 SE+EN

4 GL1300 Standard GL 1300 Length Width Total height Max gods weight Transport height Max height of goods Max weight of machine Electrical supply / El: 2880 mm 1675 mm 2790 mm 1500 kg 330 mm 1800 mm 650 kg incl. table conveyor 3 x 400V+N+PE, 1,5 kw, fuse 16A, IP 54 Operating temperature: 5 C (40 F) to 35 C (95 F) GL1300 CTS Complete line with GL conveyors + safety net GL 1300 CTS Total length incl. conveyor & collision protection: Total width incl. conveyor & collision protection: Total height (machine) Weight total: (GL conveyors + safty net) Transport height Max height of goods Max weight of maskin Electrical supply incl. conveyor 8650 mm 3313 mm 2790 mm Approx kg 330 mm 1800 mm 650 kg incl. table conveyor 3 x 400V+N+PE, 2,5 kw, fuse 16A, IP 54 Conveyor L x W 1400 x 900 mm Operating temperature: 5 C (40 F) to 35 C (95 F) 4 SE+EN

5 Custom colour Other colours on table, frame etc. Colour must be specifi ed when ordering. Lightbeam Sick Safetey application consisting of 1 pair of light beams (sender and receiver) and control unit including 2 light beams. 1. Lightbeam, 1 pc 2. Lightbeam, 2 pc 3. Lightbeam, 3 pc Top plate Top plate, rectangular A foam rubber pad fi tted top plate lowered against the goods in order to increase the stability of the cargo. Rect. top plate works best with EUR-pallets. Dimension: 600x1000 mm Top plate, round A foam rubber pad fi tted top plate lowered against the goods in order to increase the stability of the cargo. Round top plate works best with asymmetric pallet loads. Dimension: Ø700 mm Extended mast top plate Specify load height when ordering, up to 3000 mm 5 SE+EN

6 Galvanized bottom chassis The following parts are galvanized: - Bottom unit - Turntable incl roller conveyor Customized mast height Specify load height when ordering, up to 3000 mm Welding unit Weld is an option where a welding plate welds the end of the fi lm to the pallet. This option prevents diffi cult loose ends, so-called fi lm fl akes, to appear, in transport and other handling. Cabinet prepared with relays for light beams Model: Sick Only hardware included in cabinet. Light beams are not included. 6 SE+EN

7 Driven conveyor, incl frequents control Standard conveyor Length Width Max weight of goods Transport height Rollers diameter Electrical supply / El: 1400 mm 950 mm 900 kg 430 mm Ø 80 mm 3 x 230/400, 0,37 kw Driven conveyor, 1 pcs incl frequents control and pallet indicator Driven conveyor, 2 pcs incl frequents control and pallet indicator Driven conveyor, 3 pcs incl frequents control and pallet indicator Driven conveyor, 4 pcs incl frequents control and pallet indicator Pallet guiding discs Pallet control is an option consisting of 4 steel plates mounted on selected rollers on the roller conveyor. Is used to place the pallet in side of the conveyor to secure the cutting function. Also used to facilitate the pallets to prevent them from being moved during fi lming. Rolldiameter: Ø 80 mm 4 pcs Net guarding around machine Guarding for machine & in or out conveyor Option: 1. Net guarding around machine with 1 door 2. Net guarding around machine with 2 door 7 SE+EN

8 Colliation protection for conveyor Protect pallet conveyor for handling by forklift, in or out transport. Welded steel construction. Air conditioned electrical cabinet Cooling capacity 640W Mounted on the cabinet door. Active antistatic Reduces activte static electricity. The active antistatic with ionizing bar generates a balanced stream of positive and negative ions to neutralize surface static charges. Machine do not fi t in ATEX enviroment. Passive antistatic Reduces passively static electricity. The antistatic brush has a large number of highly conductive fi bres. The fi ne tips of the fi bres concentrate the electric fi eld of the static charge and ionise the air. Machine do not fi t in ATEX enviroment. 8 SE+EN

9 10 Pcs of Swan knife Knife Swan. Easy to handle. Protect the goods from scratches from the knife. Kniv Svan. Lätt att hantera. Skyddar gods från repor av kniven. START KIT STRETCH FILM 4 Rolls of high quality stretch film 4 rolls of high quality stretch fi lm 4 rullar sträck fi lm av hög kvalité 1 Pallet of high quality stretch film 1 pallet (30 rolls) of high quality stretch fi lm 1 pall (30 rullar) med sträck fi lm av hög kvalité 9 SE+EN

10 We focus on the things that matters! CYKLOP Teknik AB Villstadsvägen BURSERYD SWEDEN Tel: Fax:

11

COIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se

COIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of

More information

MAY WE HELP YOU BUNDLE YOUR PRODUCTS?

MAY WE HELP YOU BUNDLE YOUR PRODUCTS? BUNDLING MACHINES MAY WE HELP YOU BUNDLE YOUR PRODUCTS? BP-700-CVS (+KT-1200) AVC Sealing Solutions is a dynamic company with many years of experience and a clear ambition: to be the best in our market.

More information

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS

18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS 18. CARGO TROLLEYS, LIFTING TABLES, HYDRAULIC TABLE TRUCKS, HAND TROLLEYS CARGO TROLLEYS LIFTING TABLES HYDRAULIC TABLE TRUCKS HAND TROLLEYS 18 CARGO TROLLEYS CARGO TROLLEYS 1500 KG groove in the centre

More information

HANDLING SYSTEMS SOLUTION

HANDLING SYSTEMS SOLUTION AUTOMATED HANDLING CONTINUOUS HANDLING OF UNIT LOADS LA SOLUTION TRANSITIQUE HANDLING SYSTEMS SOLUTION PALLETS RANGE S pal /// RANGE FOR TRANSPORT OF PALLETS UP TO 1500 KG /// 3 STANDARD WIDTHS ADAPTED

More information

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842 l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

Equipment Information

Equipment Information 2070C Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)

More information

SSG PRODUCTS FOR SHIPS AND OFFSHORE

SSG PRODUCTS FOR SHIPS AND OFFSHORE 6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these

More information

MODEL HSR-007 Direct Drive Rolling Steel

MODEL HSR-007 Direct Drive Rolling Steel MODEL HSR-007 Direct Drive Rolling Steel 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HSR-007

More information

Section 5: Machine Overview

Section 5: Machine Overview Section 5: Machine Overview Machine Floor Plan Machine Specifications Sequence of Operation Theory of Operation Sensor Location Floor Plan 2007 Douglas Machine Inc. 5.1 Machine Floor Plan Figure 5.1: Machine

More information

More than just a base/plinth: Flex-Block base/plinth system

More than just a base/plinth: Flex-Block base/plinth system More than just a base/plinth: Flex-Block base/plinth system 2 Systematic! Everything we do centres around the benefi ts to you. With you in mind, we have developed a perfectly coordinated system platform

More information

BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -

BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt

More information

19" Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted.

19 Data Racks. Adjustable feet To compensate for uneven floors and assure great stability all feet can be up to 20 mm adjusted. 19" Data Racks Attractive design and high quality are characteristic. Basic framework is welded from multiple bent metal plate, which assures great rigidity suitable for heavier equipment. All profile

More information

PAINTING LINE GENERAL SPECIFICATIONS

PAINTING LINE GENERAL SPECIFICATIONS PAINTING LINE Page 1 / 17 Code Brand Model PAINTING LINE TECHNICAL INFORMATION: Working width: 1700 mm Working height: 1100 mm Dimensions of boards - thickness: 2 mm - 3,2 mm - width: 1000 mm - 1620 mm

More information

Stock List: >>Offset- Printing Machines

Stock List: >>Offset- Printing Machines >>Offset- Printing Machines Heidelberg GTO-52+ - Single- colour sheet offset printing machine, - Printing format 36 cm x 52 cm, - Manufacturing year 1985, - Plus- Version, - 14 Mio. prints, - Conventional

More information

HELM Hardware for Sliding Gates and Gateway Gates. Sliding hardware

HELM Hardware for Sliding Gates and Gateway Gates. Sliding hardware HELM Hardware for Sliding Gates and Gateway Gates Sliding hardware HELM Hardware for Sliding Gates Possible installation types 1 2 3 4 5 6 7 8 9 10 2 HELM Hardware for Sliding Gates HELM Product advantages

More information

Makina ve Teknik Mlz. San. Ve Tic. Ltd. Sti.

Makina ve Teknik Mlz. San. Ve Tic. Ltd. Sti. SECTION AND PIPE BENDING MACHINES MODEL UPB 10 - - Two Rolls powered - Special cast frame - Shafts are hardened with special steel material - Roll are special steel material - hardened and ground - and

More information

IT-SOLUTIONS.

IT-SOLUTIONS. IT-SOLUTIONS Well conceived Haewa Group has gained a strong profile as an innovative and competent supplier for the machinery, systems, electrical and electronic industries, well beyond European geographic

More information

RKE. Heat recovery unit. heat recovery unit RKE. from 200 to 6800 m 3 /h. General features

RKE. Heat recovery unit. heat recovery unit RKE. from 200 to 6800 m 3 /h. General features RKE Heat recovery unit from 200 to 6800 m 3 /h General features RKE heat recovery units are suitable for residential and commercial applications and offer a real energy saving in forced ventilation plants,

More information

ITB Ref Item Description QTY

ITB Ref Item Description QTY ITB Ref QTY F-01 Ordinary office desk 102 F-02 Round meeting table 2 F-03 Rectangular meeting table 1 F-04 Executive low cabinet 11 F-05 Executive desk with return 3 F-06 Square table 64 F-07 Closet 41

More information

ponto trasso DESCRIPTION CHARACTERISTICS - FLOODLIGHTS ADVANTAGES VERSIONS

ponto trasso DESCRIPTION CHARACTERISTICS - FLOODLIGHTS ADVANTAGES VERSIONS ponto trasso ponto trasso CHARACTERISTICS - FLOODLIGHTS Ponto Trasso Seal tightness: IP 67 (*) Impact resistance (glass): IK 10 (**) Static load resistance: 500 kg (*) Nominal voltage: 230 V AC Electrical

More information

DIGITUS Network & Server Cabinets. UNIQUE Series

DIGITUS Network & Server Cabinets. UNIQUE Series DIGITUS Network & Server Cabinets UNIQUE Series Benefits - Server Rack 4-Point locking system front door 3-point locking system rear door Swing handle lock with profile zylinder in front and rear door

More information

BLADE S-MAX Cabinet for Blade Server

BLADE S-MAX Cabinet for Blade Server Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and

More information

Slides and Drawers. The right collection

Slides and Drawers. The right collection Slides and Drawers The right collection 1Technical Details Drawer Runners Carrying capacity Kg. Static load Dynamic load Pag. 01 Concealed Runners Excel N Excel N Excel N Excel N650 Excel N Excel PlugIn,

More information

Pallet Racks. Pull-out Units, Cantilever Racks, Vertical Racks, Steel Pallets

Pallet Racks. Pull-out Units, Cantilever Racks, Vertical Racks, Steel Pallets Pallet Racks Pull-out Units, Cantilever Racks, Vertical Racks, Steel Pallets Weland for safe and rational warehouses Pallet Racks Page 3-6 Pull-out Units Page 7 Cantilever Racks Page 8-9 Vertical Racks

More information

ANNEX A: Office Furniture Specifications

ANNEX A: Office Furniture Specifications ANNEX A: Office Furniture Specifications NOTE: All the products must meet ANSI/BIFM standards, EU equivalent or technically comparable standards of other nations of the world. Items type Specifications

More information

Little British Car Co.

Little British Car Co. Little British Car Co. 29311 Aranel, Farmington Hills, MI 48334-2815, USA Tel: 248 489 0022 or 800 637 9640 Fax: 248 489 9665 On the web at: www.lbcarco.com E-mail: LBCarco@LBCarCo.com MGB Tube Rear Shock

More information

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049

Sports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049 Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal

More information

Label Applicator HERMA 400

Label Applicator HERMA 400 Label Applicator HERMA 400 Info GB V6.4 / 12.09.11 [ Facts & Data ] R Constructional variant Right-hand or left-hand version, always flexible to use L Power supply / Line voltage Wide range input 100V

More information

AERIAL PLATFORM SPECIFICATIONS SPEC. SHEET No. AT-270-2/EX-30 MODEL AT-270TG MAX. BASKET BOTTOM HEIGHT 27.0 m BASKET EQUIPMENT BOOM ELEVATION ROTATION

AERIAL PLATFORM SPECIFICATIONS SPEC. SHEET No. AT-270-2/EX-30 MODEL AT-270TG MAX. BASKET BOTTOM HEIGHT 27.0 m BASKET EQUIPMENT BOOM ELEVATION ROTATION DATE September, 2012 TADANO AERIAL PLATFORM MODEL : AT-270TG (CARRIER : FC9JJLA) GENERAL DATA MAXIMUM WORKING HEIGHT 29.0 m MAXIMUM BASKET BOTTOM HEIGHT 27.0 m MAXIMUM BASKET LOADING CAPACITY 200 kg or

More information

Skaltek Midi Pac. The Optimal Package? PI 22.01

Skaltek Midi Pac. The Optimal Package? PI 22.01 012 PI 22.01 The Optimal Package? Skaltek Midi Pac Skaltek AB, DeltaPark Kungsvägen 10, 196 30 Kungsängen, Sweden, Tel +46 8-584 505 00 Fax +46 8-584 505 50, www.skaltek.com 1. Skaltek Midi Pac was developed

More information

Automatic Wrapping. Mancon RA-Range WS-Range MFP - MFB AVO ORB AVO-T New VIKING carriage RA RANGE MANCON AVO ORB

Automatic Wrapping. Mancon RA-Range WS-Range MFP - MFB AVO ORB AVO-T New VIKING carriage RA RANGE MANCON AVO ORB Automatic Wrapping Mancon RA-Range WS-Range MFP - MFB AVO ORB AVO-T New VIKING carriage RA RANGE MANCON AVO ORB Mancon Range All the machines of this range are made with strong and robust tubolar steel

More information

IMPEX. Versatile Modular Shelving System. Instant solutions to hand loaded storage

IMPEX. Versatile Modular Shelving System. Instant solutions to hand loaded storage IMPEX Versatile Modular Shelving System Instant solutions to hand loaded storage Versatile M Strength in Design Impex is a shelving system that was designed to be ahead of its time and it still is today.

More information

Extension runners Roller runner systems, ball bearing extensions and concealed drawer runners Quadro

Extension runners Roller runner systems, ball bearing extensions and concealed drawer runners Quadro Extension runners Roller runner systems, ball bearing extensions and concealed drawer runners Quadro Contents Drawer assembly sets InnoTech 2-3 Full extension system Quadro 6-7 Ball bearing slides 8-11

More information

2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet

2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet 975 Cottonwood Ave., PO Box 20, Hartland, Wisconsin 53029-0020, USA www.dorner.com info@dorner.com COMMON DRIVE CONVEYOR SETUP Up to (4) conveyors can be coupled together and driven from a single gearmotor.

More information

Sliding and Folding Door Fittings Sliding Door Accessories

Sliding and Folding Door Fittings Sliding Door Accessories Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:

More information

HAWGOOD Swing Door Hinges

HAWGOOD Swing Door Hinges DICTATOR HAWGOOD swing door hinges close swing doors fast and trouble-free, and keep them closed. They are therefore particularly suitable for doors in frequent use (eg in public buildings and industry),

More information

Architectural Specifications* MODEL HDE

Architectural Specifications* MODEL HDE MODEL HDE 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com TNR Model HDE Tech Specs September 4, 2012 Page

More information

HAWGOOD Swing Door Hinges

HAWGOOD Swing Door Hinges DICTATOR HAWGOOD swing door hinges close swing doors fast and trouble-free, and keep them closed. They are therefore particularly suitable for doors in frequent use (eg in public buildings and industry),

More information

ENGLISH FORK GUIDE 2013

ENGLISH FORK GUIDE 2013 FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,

More information

Oven Ranges. Gas Ranges. Standard Features. Options. Accessories.

Oven Ranges. Gas Ranges. Standard Features. Options. Accessories. Waldorf 800 Series Oven Ranges start with a heavy-duty galvanized steel chassis. All oven liners are fully welded and vitreous enamelled. Cast iron sole plates in all ovens and welded frame doors ensure

More information

Pre-installation Manual. CONCEPT Processor 305 DW / 405 DW / 505 DW 505 DW XP

Pre-installation Manual. CONCEPT Processor 305 DW / 405 DW / 505 DW 505 DW XP Pre-installation Manual CONCEPT Processor 305 DW / 405 DW / 505 DW 505 DW XP Pre-installation Manual CONCEPT Processor 305 DW / 405 DW / 505 DW / 505 DW XP T11336 Edition AA, April 2013 This book has

More information

Contrast 2 LED. Performance Compactness Complete flexibility NEW

Contrast 2 LED. Performance Compactness Complete flexibility NEW NEW Contrast 2 LED High light output in a compact and discreet design with a wide choice of light effects created using different light distributions and accessories Performance Compactness Complete flexibility

More information

heat treatment equipment & accessories

heat treatment equipment & accessories heat treatment equipment & accessories INDUSTRIAL FURNACES Dear Customer, ElectroHeat Sweden AB is an innovative company based in Gothenburg, Sweden, and has been operating since 1975. We manufacture industrial

More information

Organisational Kitchen Fittings Kitchen Cabinet Fittings

Organisational Kitchen Fittings Kitchen Cabinet Fittings Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out:

More information

Zehnder FLATLINE Radiant Cooling and Heating Ceiling Panel

Zehnder FLATLINE Radiant Cooling and Heating Ceiling Panel Zehnder FLATLINE Radiant Cooling and Heating Ceiling Panel Company profile: The Zehnder Group is a leading manufacturer in the indoor climate systems market. It began producing radiators in 930, and has

More information

Gas-actuated thermometer Model 73, stainless steel version

Gas-actuated thermometer Model 73, stainless steel version Mechanical temperature measurement Gas-actuated thermometer Model 73, stainless steel version WIKA data sheet TM 73.01 for further approvals see page 15 Applications General process instrumentation in

More information

Knürr CoolAdd The universal retrofit solution against overheating in server racks. Rack & Enclosure Systems

Knürr CoolAdd The universal retrofit solution against overheating in server racks. Rack & Enclosure Systems Knürr CoolAdd The universal retrofit solution against overheating in server racks Rack & Enclosure Systems Knürr CoolAdd When cold air is no longer enough! Data centers are subject to constant changes:

More information

Galvanized Metal Fenders. Tread Aluminum Fenders. Plastic Fenders. Fender Brackets

Galvanized Metal Fenders. Tread Aluminum Fenders. Plastic Fenders. Fender Brackets Galvanized Metal Fenders Heavy duty stamped fenders are made from 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets not included. Wheel Size Dimensions

More information

Cooking at the Speed of light!

Cooking at the Speed of light! Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide

More information

C a b o V e r d e. M i n i s t r y o f H e a l t h. Rehabilitation Project Five Health Centres. Equipment and furniture specifications

C a b o V e r d e. M i n i s t r y o f H e a l t h. Rehabilitation Project Five Health Centres. Equipment and furniture specifications C a b o V e r d e M i n i s t r y o f H e a l t h Rehabilitation Project Five Health Centres Equipment and furniture specifications Lot Lot: 02 Medical Furniture 02-0001 Bedside table, with locker To be

More information

TOOL STORAGE PRODUCTS

TOOL STORAGE PRODUCTS FEATURES OF UNIOR TOOL STORAGE PRODUCTS 231 tool carriage "eurostyle" 940 E1 231 tool carriage "eurostyle" 940 E3 231 tool carriage "eurostyle" 940 E4 231 tool carriage "eurostyle" 940 E6 232 tool carriage

More information

Vinfoil Infigo SF110 UFC module for UV Film Casting application

Vinfoil Infigo SF110 UFC module for UV Film Casting application Vinfoil Infigo SF110 UFC module for UV Film Casting application 1 2 What is UV Film Casting (UFC) The Cast and Cure process uses a holographic film in combination with a UV coating on any substrate to

More information

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range

Pallet Handling Conveyors & Conveyor Systems. Including: Standard Range Customised Range iverbank ngineering CONVEYOR COLLECTION TODAY S PRODUCTS, TOMORROW S ENGINEERING Pallet Handling Conveyors & Conveyor Systems Including: Standard Range Customised Range Riverbank Engineering Ltd Unit 38,

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

STB Series Enclosures

STB Series Enclosures STB Series Enclosures Features/Applications: The STB series of sheet steel enclosures are designed to meet the requirement for distribution and lighting junction boxes. Available in 14 sizes with standard

More information

BSV Special Power Supply for operating rooms according to German Standard VDE and VDE

BSV Special Power Supply for operating rooms according to German Standard VDE and VDE BSV Special Power Supply for operating rooms according to German Standard VDE0558-507 and VDE 0100-710 - 1 - GUSTAV KLEIN a company introduces itself The GUSTAV KLEIN company was founded in Schongau, Germany,

More information

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 400 Slant Bed High Precision CNC Lathe. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400

More information

ORBIT Automatic Rotating Ring Machine for Spiral Wrapping with Stretch Film

ORBIT Automatic Rotating Ring Machine for Spiral Wrapping with Stretch Film ORBIT Automatic Rotating Ring Machine for Spiral Wrapping with Stretch Film overview ORBIT Our Orbit line provides high-speed and highperformance on entry level horizontal machines that can be added to

More information

AIRPORT LOGISTICS SOLUTIONS FOR AIRPORT LOGISTICS. Air Cargo Terminal Equipment

AIRPORT LOGISTICS SOLUTIONS FOR AIRPORT LOGISTICS. Air Cargo Terminal Equipment AIRPORT LOGISTICS SOLUTIONS FOR AIRPORT LOGISTICS Air Cargo Terminal Equipment WWW.LODIGE.COM AIRPORT LOGISTICS OVERVIEW TERMINAL EQUIPMENT AIRPORT LOGISTICS OVERVIEW TERMINAL EQUIPMENT ROLLER CONVEYORS

More information

DATA SHEET V aron grande.

DATA SHEET V aron grande. DATA SHEET V.2 2016 aron grande www.photinus.at 1 aron grande SELF-SUFFICIENT SOLAR LED STREET LAMP WITH SECURE SUPPLY USE Alongside the aron smart, the aron grande is also available to ensure a secure

More information

FLAT DIES AND FEEDBLOCKS

FLAT DIES AND FEEDBLOCKS FLAT DIES AND FEEDBLOCKS For the extrusion Industry maag has been providing high quality extrusion line equipment and systems for more than 30 years. Now we can provide sheet and film processors a complete

More information

Industrial Guideline nr. 2

Industrial Guideline nr. 2 Industrial Guideline nr. 2 OFFSHORE CONTAINERS Purpose Provide guidance for the safe use of offshore containers in the Dutch mining industry taking in account Dutch legislation and European standards.

More information

Terminal Boxes in Glass Fiber Reinforced Polyester (GRP)

Terminal Boxes in Glass Fiber Reinforced Polyester (GRP) Features Variants options Glass fiber reinforced polyester (GRP) enclosures Suitable for installation in Zones 0, 1, 2, 21 and 22 Certified Ex e, Ex ia and Ex tb 16 enclosure size options Various terminal

More information

42U/45U 28" Wide Rack Installation & Service Guide

42U/45U 28 Wide Rack Installation & Service Guide 42U/45U 28" Wide Rack Installation & Service Guide 96-00171-005 Rev B Important Information Information in this document is subject to change without notice and does not represent a commitment on the part

More information

ZT400 Series Parts Catalog

ZT400 Series Parts Catalog Outer Casing Components 1 Control Panel ZT410 P1058930-001 1 1 Control Panel ZT420 P1058930-041 1 2 Electronics Cover ZT400 Series P1058930-003 1 3 Media Cover (includes window) ZT410 P1058930-004 1 3

More information

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels

More information

(68.52) X. June 2000 Supercedes February 2000. xenex CONVENTIONAL FIRE DETECTION & ALARM SYSTEM. we look @ business differently

(68.52) X. June 2000 Supercedes February 2000. xenex CONVENTIONAL FIRE DETECTION & ALARM SYSTEM. we look @ business differently (68.52) X June 2000 Supercedes February 2000 xenex CONVENTIONAL FIRE DETECTION & ALARM SYSTEM.... we look @ business differently XENEX SYSTEM ARCHITECTURE Note: This schematic is for guidance only please

More information

HIGHLY EFFICIENT COOLING FOR YOUR DATA CENTRE

HIGHLY EFFICIENT COOLING FOR YOUR DATA CENTRE HIGHLY EFFICIENT COOLING FOR YOUR DATA CENTRE Best practices for airflow management and cooling optimisation AIRFLOW MANAGEMENT COLD AND HOT AISLE CONTAINMENT DC ASSESSMENT SERVICES Achieving true 24/7/365

More information

120W High Bay II Datasheet

120W High Bay II Datasheet 120W High Bay II Datasheet Solid-State Lighting Series Features : Solid State Lighting Technology Superior Light Quality Reduce CO₂ Emission Energy Saving(120W) Ecologically Friendly Long Life-Time IP65

More information

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches)

HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) HOT ROLLED ELECTRIC RESISTANCE WELDED (HREW) ROUND TUBING - ASTM A513 TYPE 1 Diameter Tolerances (inches) NOTE: Measurements for diameter are to be taken at least 2 inches (a) from the ends of the tubes

More information

Commercial Gas Furnace Upflow

Commercial Gas Furnace Upflow Commercial Gas Furnace Upflow Model G24-200 80% A.F.U.E. 200,000 Btuh Input Heating Cap. 7.5 or 10 Tons Nominal Add-On Cooling GUK FEATURES Certified by A.G.A./C.G.A. Laboratories. Heavy gauge painted

More information

Steel mill tumble belt shot blast machines

Steel mill tumble belt shot blast machines Steel mill tumble belt shot blast machines Blast machines Second-hand machines Conveyor systems Service and spare parts Steel mill tumble belt shot blast machines are used for deburring, descaling, sand

More information

BARRIER LIFT SYSTEM 2 BARRIER LIFT SYSTEM

BARRIER LIFT SYSTEM 2 BARRIER LIFT SYSTEM BARRIER LIFT SYSTEM BARRIER LIFT SYSTEM The crash rated elkosta Barrier Lift System BLS offers maximum security for highly sensitive entry or exit points against unauthorised vehicles attempting to break

More information

Morgue refrigeration unit

Morgue refrigeration unit Morgue refrigeration unit The Morgue refrigeration units are made of sturdy, self-supporting walls, floor and ceiling elements. They are delivered in separate components and are to be assembled on site

More information

Technical Data FLIR A35 f=9 mm

Technical Data FLIR A35 f=9 mm Technical Data FLIR A35 f=9 mm Part number: 63209-0101 Copyright 2012, FLIR Systems, Inc. All rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 200HT / 200MC Slant Bed, High Precision CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 00HT / 00MC Slant Bed, High Precision CNC Lathes www.dugard.com Dugard 00HT / 00MC Hydraulic Tailstock Quill can be controlled by programme or manually, auto sensing

More information

EXPORT w w w. k r a n m a n. c o m

EXPORT w w w. k r a n m a n. c o m EXPORT Kranman T1700 4WD series for ATV. Hydraulic unit KS-780 Facts: standard equipped T1700 Trailer T1700 4WD Total width 1.340 mm 4WD drive Hydraulic Total length 3000-3900 mm Pivoting stays 4 Load

More information

LIFT TRUCK SPECIFICATIONS

LIFT TRUCK SPECIFICATIONS LIFT TRUCK SPECIFICATIONS RT50 2-Wheel Drive 4-Wheel Drive RT60 2-Wheel Drive 4-Wheel Drive RT80 2-Wheel Drive 4-Wheel Drive TABLE OF CONTENTS RT50 / RT60 / RT80 2-WD / 4WD Specifications / Dimensions.

More information

JP 2000 Tribander Owner Manual

JP 2000 Tribander Owner Manual JP 2000 Tribander Owner Manual JP-2000 Technical overview JP-2000 is effective tribander beam for 20m, 15m and 10meters with full size elements without traps. Antenna is designed using latest computer

More information

SYSTEM 1300 ROLLING STOCK

SYSTEM 1300 ROLLING STOCK SYSTEM 1300 ROLLING STOCK The Railex System 1300 is an extensive line of Rolling Stock developed specifically for garment handling applications. It is made to withstand use in Industrial and Institutional

More information

Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled

Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Machine nozzle with needle shut-off type HP pneumatically or hydraulically controlled Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Needle shut-off with integrated 2-way actuator

More information

valid as of 1 April 2014 Fradiflex metal water stop

valid as of 1 April 2014 Fradiflex metal water stop FRANK Product List valid as of 1 April 2014 Fradiflex metal water stop Fradiflex metal water stop Stremafl ex Controlled crack component Sealing of joints in concrete structures requires a very reliable

More information

O-I DUBI PLANT FANS Quotation Spec Data & Specifications

O-I DUBI PLANT FANS Quotation Spec Data & Specifications TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement

More information

Discharge station for bags and big bags. MKSB

Discharge station for bags and big bags. MKSB Discharge station for bags and big bags. MKSB Discharge station for bags and big bags. One machine for two applications. The Bühler discharge station is versatile and flexible to use thanks to its modular

More information

JP Tribander Owner Manual

JP Tribander Owner Manual JP Tribander Owner Manual JP-Tribander Technical overview JP-Tribander is effective tribander beam for 20m, 15m and 10meters with full size elements without traps. Antenna is designed using latest computer

More information

Customized Server Cabinets

Customized Server Cabinets GOING GREEN WITH CUSTOMIZABLE CABINETS AND RACKS Designed to provide industry leading airflow, CyrusOne s cabinets and rack solutions promote optimal cooling and contribute to reduced power consumption.

More information

VANGUARD // ROLLER BLINDS

VANGUARD // ROLLER BLINDS VANGUARD // ROLLER BLINDS Roller Blinds Application VANGUARD Roller Blinds are developed for internal use. The blinds provide effective and efficient control of heat, light and glare. High quality components

More information

VOLTAGE HZ PHASE COS Ø PRP KVA/KW LTP KVA/KW AMPERAGE 415/ ,8 129,8/103,8 143,0/114,4 199,18 400/ ,8 129,8/103,8 143,0/114,4 206,65

VOLTAGE HZ PHASE COS Ø PRP KVA/KW LTP KVA/KW AMPERAGE 415/ ,8 129,8/103,8 143,0/114,4 199,18 400/ ,8 129,8/103,8 143,0/114,4 206,65 TECHNICAL SPECIFICATIONS Model: AD-145 Stand-by automatic gen set. Image for guidance purposes. (400 / 230 V) ENGINE MAKE DEUTZ MODEL BF4M 1013 FC CONTINUOUS POWER: (PRP Prime Power norma ISO 8528-1) 130

More information

1 General description

1 General description Specification SERIES: SyScroll 20-30 Air EVO HP TYPE: Air to water inverter driven heat pump TECHNOLOGY: scroll compressor / inverter driven CAPACITY RANGE: Cool ing 20-35 [kw] Heating 20-34 [kw] 1 1 General

More information

WERKZEUGMASCHINEN BENDING TOOLS

WERKZEUGMASCHINEN BENDING TOOLS WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de

More information

Architectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8

Architectural Specifications MODEL HDXL 9. 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 MODEL HDXL 9 200 Fairview Road, Unit #2, Barrie, Ontario L4N 8Z8 Tel: 866-792-9968 or 705-792-9968 Fax: 705-735-9564 www.tnrdoors.com email: info@tnrdoors.com Model HDXL 9 Tech Specs September 4, 2012

More information

2016 Evolocity High Schools competition Technical regulations

2016 Evolocity High Schools competition Technical regulations 2016 Evolocity High Schools competition Technical regulations (Amended gratefully from Greenpower F24 regulations, UK) MULTI (3 + )WHEELED VEHICLES All vehicles are subject to scrutineering and compete

More information

Güntner Penthouse Cooler

Güntner Penthouse Cooler Güntner Info Güntner Penthouse Cooler NH 3, CO 2, HFC Pump operation Direct expansion 20 200 kw The intelligent solution for state-of-the-art cold stores! Intelligent solution for state-of-the-art cold

More information

Lahti Precision belt scales

Lahti Precision belt scales Lahti Precision belt scales Reliability and precision for demanding industrial environment 100 years of experience Lahti Precision belt scales Precision for industrial conveyor systems The Lahti Precision

More information

Incubator with mechanical convection

Incubator with mechanical convection BF series 400 Incubators and cooling incubators Incubator with mechanical convection The BINDER incubator of the BF series with mechanical convection is suitable for all gentle incubation applications,

More information

EXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique

EXTeRUS. EXTeRUS - With patented design, able to join technology. and quality of materials with a charming shape. Unique EXTeR US G L A S S - With patented design, able to join technology and quality of materials with a charming shape. Unique thanks to its outstanding loading capability with 150 kg maximum weight and height

More information

ALUMINIUM SYSTEMS S.A.

ALUMINIUM SYSTEMS S.A. ΡΟΛΑ ΑΠΛΑ και ΘΕΡΜΟΜΟΝΩΤΙΚΑ NORMAL & THERMAL INSULATING ROLLER SHUTTERS ALUMINIUM SYSTEMS S.A. ALUMINIUM SYSTEMS S.A C.AL.COM,.,,,.,,.. C.AL.COM. C.AL.COM. About us C.AL.COM is a modern dynamic commercial

More information

EK-X technical data. Vertical order picker EK-X

EK-X technical data. Vertical order picker EK-X @ EK-X technical data. Vertical order picker EK-X 2 EK-X TECHNICAL DATA. Characteristics Weights Wheels Dimensions Performance Electric motors Other 1.1 Manufacturer STILL STILL STILL 1.2 Type designation

More information