Modular Datacenter based in a 20' container

Transcription

1 Modular Datacenter based in a 20' container RETEX, S.A. Avda Tecnología, VILADECANS (Barcelona), SPAIN. T F info@retex.es

2 INDEX 1. THE DATABOX SOLUTION GENERAL SPECIFICATIONS OUTER DETAILS INNER DETAILS ADVANTAGES OF THE SOLUTION TECHNICAL SPECIFICATIONS

3 1. THE DATABOX SOLUTION RETEX DataBOX is designed for any client needing to house their mission critical servers in a data centre. It is a completely modular solution and can be tailor-made to meet the needs of each client; it can even be the answer for those companies looking for a server facility, in their own offices or externalized in a large data centre, either of their own property or rented, on a pay-for-use basis. RETEX DataBOX is also be the best solution for companies that: Require the use of a data centre in a short period of time (less than one month). Require a data centre at a reasonable price, avoiding large investment. Would like to obtain a next-generation data centre without putting the investment at risk in view of a possible relocation of the business. 1.1 SPECIFICATIONS Advanced Modular Data Center. Naval container, vandalism protected and waterproof. External dimensions20 feet (6.16 m x 2.59 m x 2.43 m). Made of reinforced corrugated steel with internal and external anticorrosive treatment for indoor and outdoor conditions. Floor reinforced with galvanized steel plates and longitudinal steel beams for anchoring and fixing the LOGIC2 racks and HVAC equipment. Each DataBOX has high energy-efficiency HVAC systems with liquid cooling and free cooling ready. These systems are included in the N+1 set-up and can provide up to 90 KW. DataBOX PUE index is less than 1,3 including the energy consumption of the chillers and the HRV. The corridor "cold" (or frontal zone) has an area of 90cm between the wall of the module and the LOGIC2 racks. Its thermal isolation allows a perfect inner temperature optimization. The corridor "hot" (or back area) is not isolated too and has an area of 75cm between the wall of the module and the LOGIC2 racks. This allows operators and technicians can work comfortably, both with respect to the placement of equipment and working with wiring. By default, DataBOX, complies with F 15 fire resistance standards ad withstanding temperatures up to 500 C. It complies, ISO 6346 stndard too. Each module Retex DataBOX weighs about 3,500 kg, and its loading capacity is up to 30,000 kg, which allow stacked columns up to 6 modules vertically. All DataBOX are registered for sea, air or surface shipments

4 1.2 OUTER DETAILS Material: 20-foot naval container, made of reinforce corrugated steel with internal and external anti-corrosive treatment for long term outdoor conditions. Complies with fire resistance standard F15 and ISO Anti-vandalism/physical security: Six different anchorage points to guarantee unauthorized access. CETACs Double entry of independent CETAC connectors, with three-phase electric power transmission, with ground (earth) connection and connected to their own modular electrical busbars with the possibility of connecting protection elements and hot electrical regulation. Silent Blocks Silent Block shock-absorption system which also allows for the levelling of the data processing centre with the floor. Channeling cooling system Cold water entry and hot water exit, used to cool DataBOX, with no soldering point to avoid possible internal leaks. Communications: Entry of 24 redundant fibre optics, and patch panel fibre switch

5 1.3 INNER DETAILS Sensors Cameras Fire-extinguishing system Floor: Reinforced floor with galvanized steel boards and longitudinal steel beams for the anchorage of the racks and the HVAC equipment. Cold aisle: With thermal isolation for interior temperature optimization. Its length of 90 cm is ideal for specialist work and for equipment installation and maintenance. Hot aisle: Without termal isolation, its lenght of 80 cm, it is ideal for equipment connectivity and maintenance tasks. Video surveillance cameras: Indoor cameras in both hot and cold corridors, with integrated alert system and remote recording, including motion sensor and TCP-IP access. Sensors: are installed in both hot and cold corridors, for the monitoring of environmental temperature, humidity, fluids, vibrations or dust particles, with remote control and management

6 Fire-extinguishing system Waterless fire suppression system 3M Novec 1230, which keeps the oxigen level at a minimum in order to avoid combustion while at the same time guaranteeing the security of persons present in the room and avoiding potential re-ignition. It is environmentally-friendly as it does not have harmful side-effects, nor does it contain bromine nor chlorine. In accordance with the Kyoto Protocol. Cooling system Highly energy-efficient technical HVAC systems with cooling liquid and possible free cooling. These systems are included in the N+1 set-up and can provide up to 90 KW of cold. The equipment has 24 built-in hot-switchable fans. Racks Each module contains eight LOGIC2 racks of up to 45U 600x900/1000, with extruded aluminum outer structure upgradeable to 368 U/ units installation capacity.. Electrical busbar (optional) 175 KW of electrical power via two independent lines of 87.5 KW each, with Hot Plug connectivity for individual power upgrades in each rack. Lighting Interior lighting is achieved via LEDs (aka cold light), in both hot and cold corridors. LED lighting saves a lot of energy as it does not generate heat. It is also environmentally friendly due to its absence of mercury. LEDs normally consume 80-90% less electricity compared to traditional light-bulbs

7 2. ADAVANTAGES OF THE SOLUTION MORE THAN 300 SERVERS IN JUST 1 DataBOX Fully transportable, conceived for housing high density IT's platforms and operating as an independent Datacenter, backing centres in case of continuity of operations plans, Cloud Computing configurations or as a modular and scalable conventional Datacenter. Retex DataBOX offers a number of added benefits compared to traditional data centers: The manufacture and design of the solution are done in-house. Its modularity and scalability allow for the initial investment to be limited and adjusted to the real-time needs of the client. Its high energy efficiency and its mobility allow for energy savings of up to 40%, thanks also to the fact that it can be situated in the most convenient location. It is designed to follow the company wherever the business relocates moves to, and its location-independence guarantees continuity of business. It is in constant evolution: the autonomous nature of each module means that it can be upgraded to the latest technologies without the need for large investment Portability and ubiquity Thanks to an easy transportation and to a constructive structure complying with ISO standards, the DataBOX can move quickly and easily, allowing to be used in contingency plans for the recovery of IT services in record time. Security Each module counts with all the necessary equipments to guarantee an optimal security from the inside and outside, by the implementation of detection systems and fire extinguish, control of access, watertightness, control and regulation of the environmental conditions, electrical, optical fibre connections and air-conditioning redundancies. Scalability/Modularity Because each module is perfectly able to operate independently, simply adding further modules it will be easy to increase the space dedicated to the equipments

8 Costs reduction An optimal design will imply a reduction of electrical consumption, allowing a significant cost reduction compare to conventional solutions. Energy efficiency The concentration of equipments located in a reduced space will allow employing air-conditioning of high effectiveness in energy savings. The energy saving will reach up to an 80% compare to conventional Datacentres. Implementation Thanks to its modular concept, the lead time of construction if about a few weeks only, which represents a substantial reduction of time compare to the one necessary to build a conventional Datacentres

9 3. TECHNICAL SPECIFICATIONS TECHNICAL SPECIFICATIONS RETEX DATABOX 20 F Outer structure: Watertightness F15 fire resistance standard ISO 6346 standard Inner structure: 8 LOGIC2 racks 45U 600x U U s space Cold aisle 90cm /hot aisle 80cm Race way for data cabling. Cooling-HVAC 3 energy-efficient technical HVAC units, with a 90 kw of total cold power; they use water for cooling, and 24 hotswitchable fans. The fans in the coolers are hot-replaceable in order to avoid service interruption. In addition, each cooler contains two particle filters, flowmeter, purge system and emergency emptying. These can be monitored and controlled remotely via TCP-IP, and it is possible to combine the regulation of the water flow with the air flow in order to guarantee the cooling of the units and the lowest possible energy consumption. We guarantee a temperature of 24ºC in the cold corridor. High energy efficiency equiments. Up to 90 KW 8 fans per unit. Can be replaced with the unit working m 3 /h per equipment Efficient solutions for a smart cooling of the Datacentres. Modular and scalable design allowing an easier expansion according to the future requirements. High performances and energy efficiency of the water-air heat exchanger. Ideal for High Density requirements. Captures from the hot aisle the air (hot) expelled from the equipments and returns it to the cold aisle once cooled. Monitories and adjust the flow from the fans and the refrigerant in order to guarantee the most appropriate temperature entry to the servers. The EC fans, provided with fluctuant and gradual speeds in accordance to the real thermal needs, allow reducing CO2 emissions as well as energy savings

10 Quick assembly and lay-on to the side of the LOGIC² racks. Easy maintenance, the filters and the fans can be replaced while in use. Vigilance, control y alarms in real-time via IP. Communication interface by multifunction LCD screen. Optimises the PUE of the Datacenter. Possible to install near the major thermal charge areas. (Hot spots) Control device to maintain the operating conditions below the Dew Point. Free Cooling ready The refrigerant temperature entry is 15º C. The temperature of the air at front side is 20º C. Closed circuit and double anti-drip system. Top and bottom options for the refrigerant connection. Possibility to adapt wheels and/or levelling feet. 220V/50-60Hz connection IEC Dimensions 42U (H) x 300 (W) x (D) mm Electrical Power: Double redundant CETAC connectors, with three-phase electric power transmission, ground (earth) connection and double electrical channeling via longitudinal busbar with connectivity to protective elements every 50 cm. Entry power of 175 KW, two redundant lines of 87.5 KW each. All protective elements can be hot-connected, hot-disconnected and hotmodified to ensure 100% electrical supply. Individualized modular SAI protection, per rack, ready for connection to one or two generators. SAIs with internal automatic Bypass which supply electricity to the connected points in case of power outage. Smart battery and electricity management, which are also hot-replaceable and proactively network-managed via different remote control systems, both visual and audio based. The interior lighting of the DataBOX is achieved via LEDs which do not increase the environmental temperature and are of low consumption. Communication: Entry of 24 redundant fiber optics, and patch panel fiber switch. In the DataBOX it is possible to store switching equipment according to the kind of service to be offered to the client or integrator. The internal cabling set-up will be based on the needs of the integrator and/or client. The Adam DataBOX has been designed so that the integrators or clients can deploy the internal cabling system of their choice. Adam s own engineering department will design the best solution on a case-by-case basis, taking into account the specific needs of the client

11 Control and Security In addition to the physical security measures that the modular data centers provide, each DataBOX also includes: Six different anchorage points to guarantee unauthorized access. Internal cameras located in both hot and cold corridors, with built-in alert systems and remote recording, motion-activated and accessible via TCP-IP. Temperature and humidity gauges installed in the hot and cold corridors. Waterless fire suppression system 3M Novec 1230, which keeps the oxygen level at a minimum in order to avoid combustion but at the same time guaranteeing the security of persons present in the room. Thanks to its absence of harmful side-effects and the fact that it does not contain bromine nor chlorine, its use does not damage the ozone layer. Management hub integrated into the control rack. Outdoor alarm signaling. All the afore-mentioned systems are monitored via TCP-IP access and can send alerts ( , SMS, SNMP) in case of any event. Green IT: The new energy-efficient data centre is one of the largest of its kind in Spain, and one of the most energy-efficient in the world. We have taken into account the specifications of the area and its natural resources to benefit the operation of the data centre thus reduce the PUE index as much as possible. DataBOX s PUE index is less than 1.3, including the energy consumption of the chillers and the HRV: we achieve this by exploiting the area s naturally low temperatures to cool the modular data centers, leading to a reduction in redundant energy consumption. We also comply with all environmental ISO regulations. (1) PUE is a measure of how efficiently a computer data centre uses its power; specifically, how much of the power is actually used by the computing equipment (in contrast to cooling and other overhead). PUE is the ratio of total amount of power used by a computer data centre facility to the power delivered to computing equipment. In the following table we can see if a given data centre is energy efficient depending on its PUE index