Introduction to Auditing
|
|
- Adam Lee
- 8 years ago
- Views:
Transcription
1 Introduction to Auditing Safety Groups Advantage Program Tom Welton Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 1
2 Overview Objective The Basics Principles of Auditing Audit Process Preparation & Initiation Document Review Evidence Findings Management Management Review Action Plan Case Study Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 2
3 Objective To provide you an introduction to the basic process of conducting an audit of your Health and Safety Management System. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 3
4 The Basics What is a HSMS? Health and Safety Management System (HSMS) The documented process that fully incorporates effective risk management principles into a health and safety program. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 4
5 The Basics What is auditing? The systematic, independent and documented process for obtaining audit evidence and evaluating it objectively to determine the extent to which audit criteria are fulfilled Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 5
6 The Basics Other Audits Workwell Audits Compliance Audits (against legal requirements) Combined Audits (for example, H&S and Environment) Risk Audits/Risk Assessments Workplace Inspections Pre-start-up Inspections Subject Specific for example: RTW Self-Assessment Confined Space Audit/Assessment Emergency Preparedness & Response Audit Second party audits (for example, customers or suppliers) Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 6
7 The Basics Why audit? To provide Owner/Senior Management with objective information on which they can react to improve their health and safety activities Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 7
8 The Basics Definitions Conformity Conformity is the fulfillment of the audit criteria which includes requirements of an audit standard, the workplace s health and safety policies, practices, procedures and related documentation. Nonconformity Nonconformity is the non-fulfillment of, or deviation from, the requirements. It is categorized as Major and Minor. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 8
9 The Basics 5 Steps to Managing Health & Safety The 5 steps apply to the Advantage Program requirements The 5 steps apply to each element of the HSMS Review and must be documented/recorded for each Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 9
10 The Basics Principles of Auditing Audit Scope Extent and boundaries of an audit Note: The audit scope generally includes a description of the physical locations, organizational units, activities and processes, as well as the time period covered. Audit Criteria Audit criteria are used as a reference against which audit evidence is measured. In the WSIB Advantage Program the criteria includes; the requirements documented in the HSMS Review Form and the firm s health and safety program, policies, procedures and related documents. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 10
11 The Basics Principles of Auditing (cont d) Audit Evidence Records, statements of fact or other information, which are relevant to the audit criteria and verifiable. (minimum two different sources of evidence). Audit Findings/Conclusions Results of the evaluation of the collected audit evidence against audit criteria. Note: The audit findings can indicate either conformity or nonconformity with audit criteria. Auditing relies on these principles to make it effective and reliable. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 11
12 The Basics Key Concepts What is Auditing The systematic, independent and documented process for obtaining audit evidence and evaluating it objectively against established audit criteria Why Audit To provide Owner/Senior Management with information on which they can react to improve their health and safety activities Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 12
13 The Basics Key Concepts Auditing Principles Scope extend and boundaries of an audit Criteria a set of established requirements the audit evidence is evaluated against. The criteria for Advantage firms is - HSMS Review Form and the firm s H&S program, policies, procedures and other related documents. Evidence records, statements of fact or other information, which are relevant to the audit criteria and verifiable (minimum two sources of information) Findings evidence compared to criteria Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 13
14 Audit Process Key Concepts An audit is conducted in a systematic manner and requires preparation Document Review collects information to help determine if the audit criteria are being met by the firm Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 14
15 Audit Process Key Concepts There are multiple sources of evidence: documents, records, interviews and observations Auditor(s) need sufficient information before it is considered evidence Recorded evidence is evaluated against established audit criteria to determine objective audit findings Finding of conformity or nonconformity (major or minor) Nonconformities are situations where a requirement clearly has not been fulfilled with evidence based on objective facts Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 15
16 Management Key Concepts The audit report can be recorded on the HSMS Review Form Other styles of audit reports can be used, as long as they include all nonconformities found and relate it to the criteria requirements Report any commendable HSMS findings Management Review can be formal or informal Owner/Senior Management must understand and agree to the audit findings/conclusions. Any diverging opinions are recorded if not resolved. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 16
17 Management Key Concepts All nonconformities are included and initiated in the action plan Conformities can be included in the action plan for continual improvement Resolving nonconformities and verifying they are resolved are done after audit activities Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 17
18 The Basics The Audit Process INITIATING Document Review ACTION PLAN CONDUCT THE AUDIT Evidence Findings MANAGEMENT REVIEW AUDIT REPORT Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 18
19 Audit Process: Initiate Initiate and Prepare Management assigns the qualified auditor(s) Develop an audit plan which includes: Objectives, Scope, Criteria, Schedule Resources: Time Audit support (team) Health and Safety Equipment (PPE) Floor Plan, Equipment List, Work room Audit working documents (audit notes/sketches/interview notes etc.) Communicate the audit activity to appropriate workplace parties Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 19
20 Audit Process: Conduct the Audit Document Review Documents and Records A document may be a policy, a procedure, a work instruction, a form, or other written information, that generally gives direction. A document is current, active and changeable. A record is dated, historical, and unchangeable. (An obsolete document may become a record). Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 20
21 Audit Process: Conduct the Audit Document Review First step in Conducting the Audit Establishes initial conformity to the audit criteria Determines other types of evidence the auditor(s) will sample Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 21
22 Audit Process: Conduct the Audit Document Review Level 1 Docs What? (some why?) Level 2 Docs 5W s & H of system Policy System Procedures H&S Policy Statement H&S Policy Manual (optional) Typically addresses each WSIB HSMS Requirement Big Picture (may be organized by processes ) Level 3 Docs - more details of 5W s & H Level 4 Docs detailed How Operating Procedures Work Instructions Forms, checklists, templates, & other data collection documents Typically organized by department Task Specific Instructions RECORDS Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 22
23 Audit Process: Conduct the Audit Audit Evidence Auditor(s) look for evidence that demonstrates requirements have been met. The sources of information gathered are grouped into these categories: Documents verify relevant, clear and complete procedures, work instructions, guidelines, etc., are readily accessible Records: verify appropriate records have been kept to demonstrate that requirements of procedures and the standard have been met Observations: verify activities, workplace conditions, controls are in place Interviews: verify health and safety system/program understanding. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 23
24 Audit Process: Conduct the Audit Audit Evidence If all available sources of information (minimum 2) are consistent then the information may be considered evidence of conformity. Inconsistent information is evidence of nonconformity. Evidence is measured against the audit criteria to determine conformity or nonconformity Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 24
25 Audit Process: Conduct the Audit Audit Evidence Collecting and Verifying Information: Review Documents and Records Note details of documents and records reviewed Observations while at the facility and throughout the audit Note relevant observations that demonstrate conformity and nonconformity Interviews during the facility tour and throughout the audit Conduct interviews appropriate to the situation and the person Interview people from appropriate levels and functions Make notes of evidence of conformity and nonconformity Summarize the results of the interview with the person Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 25
26 Audit Process: Conduct the Audit Audit Evidence Collecting and Verifying Information: How much is enough? Sufficient to demonstrate a consistent pattern of conformance One piece might be enough, for example: maybe only one incident occurred so there will be only one investigation report observed one failure to use confined space procedure; only one work instruction Perhaps 10 to 50 pieces may be appropriate, for example: monthly workplace inspections pre-shift forklift inspections Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 26
27 Audit Process: Findings Audit Findings Generating Audit Findings/Conclusions: Evaluate all audit evidence against audit criteria During the audit, evidence must be presented that the criteria are in place for conformity. If any requirement is not met, a nonconformity is noted. Audit findings/conclusions indicate conformity or nonconformity to criteria Note: Any corrective actions to a nonconformity does not change the audit finding/conclusion. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 27
28 Audit Process: Findings Audit Conclusion Conformity Conformity is the fulfillment of the audit criteria which includes requirements of an audit standard, the workplace s health and safety policies, practices, procedures and related documentation. Nonconformity Nonconformity is the non-fulfillment of, or deviation from, the requirements. It is categorized as Major and Minor. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 28
29 Audit Process: Findings Audit Conclusions MAJOR nonconformities: the issue will continue to occur because of how the HSMS and health and safety program are structured there is unacceptable risk to a worker s health or safety there are serious legal implications, or there is an accumulation of related minor nonconformities. MINOR nonconformities: the HSMS and the health and safety program structures are valid, but there was minor deviation (e.g. human error) there is no unacceptable risk to the worker there are no significant legal implications, and there is not an accumulation of related minor nonconformities. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 29
30 Management: Audit Report Audit Report The report must reference the requirement (i.e. A.2), and the evidence that supports the findings/conclusions of conformity and nonconformity Indicate any situations encountered that may decrease the reliability of the audit conclusion Diverging opinions about findings and conclusions should be discussed, resolved if possible, and recorded if not resolved The report must include the date(s) of the audit, report date, auditor(s) name Auditor(s) prepare to present or discuss the audit with the Owner/Senior Management Note For Advantage the completed HSMS Review Form can be the report submitted for Management Review. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 30
31 Management: Review Management Review Owner/Senior Management reviews the audit report Ensure the Owner/Senior Management agrees with and understands the audit conclusions A record of the Owner/Senior Management review Establish a timeframe for the employer s continual improvement plan Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 31
32 Management: Action Plan Action Plan As a result of the audit findings/conclusions: An action plan is developed for all nonconformities The action plan outlines how nonconformities will be corrected, responsibilities assigned and timelines established. The action plan is developed or reviewed, approved, resourced and initiated by the Owner/Senior Management. The employer s auditor(s) may conduct follow-ups to ensure the element is progressing to conformity Note for the Advantage Program the continual improvement plan is the action plan. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 32
33 Management: Action Plan Action Plan An action plan can also be used for continual improvement When a criteria requirement is met, but may deteriorate into a nonconformity, the audit may indicate an opportunity to improve. Continual Improvement The process of enhancing the HSMS to achieve ongoing improvement in overall health and safety performance. Improved performance on its own IS NOT continual improvement, it is an outcome you must improve the way you manage. Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 33
34 Year-End Submission Year-end Report Checklist: *All Advantage firms submit the following documentation attached to the Checklist; 1 Written Standard 20% 2 Internal Auditor training record 20% 3 Completed an approved HSMS Review (internal audit) w/senior Management sign-off acknowledging their involvement 20% 4 Written Continual Improvement plan addressing HSMS Review w/senior Management signoff acknowledging their involvement 20% 5 Return to Work 20% Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 34
35 Case Study Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 35
How To Audit A Health And Safety Management System
Introduction to Auditing 2015 Safety Groups Advantage Program 1 ! Emergency! Phones! Break(s)! Questions OVERVIEW! Objective! Principles of Auditing! Audit Process! Audit Review 3 OBJECTIVE To provide
More informationInternal Audit Checklist
Internal Audit Checklist 4.2 Policy Verify required elements Verify management commitment Verify available to the public Verify implementation by tracing links back to policy statement Check review/revisions
More informationSummary of Requirements for ISO 14001:2004 February 24, 2005
Summary of Requirements for ISO 14001:2004 February 24, 2005 This document provides a summary of the requirement of ISO 14001:2004, which is an international standard describing the specification and requirements
More informationEMS Example Example EMS Audit Procedure
EMS Example Example EMS Audit Procedure EMS Audit Procedures must be developed and documented with goals which: Ensure that the procedures incorporated into the EMS are being followed; Determine if the
More informationISO 9001:2000 AUDIT CHECKLIST
ISO 9001:2000 AUDIT CHECKLIST No. Question Proc. Ref. Comments 4 Quality Management System 4.1 General Requirements 1 Has the organization established, documented, implemented and maintained a quality
More informationThe following paragraphs, identified to coincide with the OHSAS 18001:2007 numbering system, provide a clause-by-clause summary of the standard.
Summary of OHSAS 18001:2007 Requirements With this article, the 18000 store provides a brief and clear summary of the OHSAS 18001:2007 requirements. First of all, OHSAS 18001 is an international standard
More informationHealth and Safety Management Standards
Health and Safety Management Standards Health and Safety Curtin University APR 2012 PAGE LEFT INTENTIONALLY BLANK Page 2 of 15 CONTENTS 1. Introduction... 4 1.1 Hierarchy of Health and Safety Documents...
More informationISO 14001:2015 Client Transition Checklist
ISO 14001:2015 Client Transition Checklist How to use this document: It is not mandatory to use this document. It is a guide to give you an indication of your readiness for audit against ISO 14001:2015.
More informationCHECKLIST ISO/IEC 17021:2011 Conformity Assessment Requirements for Bodies Providing Audit and Certification of Management Systems
Date(s) of Evaluation: CHECKLIST ISO/IEC 17021:2011 Conformity Assessment Requirements for Bodies Providing Audit and Certification of Management Systems Assessor(s) & Observer(s): Organization: Area/Field
More informationOH&S Management Systems Audit Checklist (NAT, E3)
3.1.2 3.1.1 Introduction OH&S Management Systems Audit Checklist (NAT, E3) This audit checklist is based on Element 3 (Implementation) of the National Self-Insurers OHS Audit Tool. For a full copy of the
More informationDEPARTMENT OF COMMERCE ENVIRONMENTAL MANAGEMENT SYSTEM
DEPARTMENT OF COMMERCE ENVIRONMENTAL MANAGEMENT SYSTEM Audit Report Audit Dates: November 14-15, 2012 Prepared by: Kurt Schlomberg National Renewable Energy Laboratory For Internal Use Only ii. Table of
More informationISO 9001:2008 Audit Checklist
g GE Power & Water ISO 9001:2008 Audit Checklist Organization Auditor Date Page 1 Std. 4.1 General s a. Are processes identified b. Sequence & interaction of processes determined? c. Criteria for operation
More informationISO 9001 (2000) QUALITY MANAGEMENT SYSTEM ASSESSMENT REPORT SUPPLIER/ SUBCONTRACTOR
Page 1 of 20 ISO 9001 (2000) QUALITY MANAGEMENT SYSTEM ASSESSMENT REPORT SUPPLIER/ SUBCONTRACTOR SUPPLIER/ SUBCONTRACTOR NAME: ADDRESS: CITY AND STATE: ZIP CODE: SUPPLIER/MANUFACTURER NO PHONE: DIVISION:
More informationISO 9001:2000 Gap Analysis Checklist
ISO 9001:2000 Gap Analysis Checklist Type: Assessor: ISO 9001 REQUIREMENTS STATUS ACTION/COMMENTS 4 Quality Management System 4.1 General Requirements Processes needed for the quality management system
More informationAbu Dhabi EHSMS Regulatory Framework (AD EHSMS RF)
Abu Dhabi EHSMS Regulatory Framework (AD EHSMS RF) Technical Guideline Audit and Inspection Version 2.0 February 2012 Table of Contents 1. Introduction... 3 2. Definitions... 3 3. Internal Audit... 3 3.1
More informationContents. Management Policy Manual SEM USA Page 2 of 12
SEM USA Page 2 of 12 Contents 1. The Schneider Electric Motion USA Management Policy... 3 2. PROCESS INTERACTION... 4 3. COMPANY OBJECTIVES:... 5 4. MANAGEMENT SYSTEM... 6 4.1. General Requirements...
More informationCOMPANY NAME. Environmental Management System Manual
Revision No. : 1 Date : DD MM YYYY Prepared by : Approved by : (EMR) (Top Management) Revision History Revision Date Description Sections Affected Revised By Approved By Table of Content 0.0 Terms and
More information3 Terms and definitions 3.5 client organization whose management system is being audited for certification purposes
3 Terms and definitions 3.4 third-party certification audit audit carried out by an auditing organization independent of the client and the user, for the purpose of certifying the client's management system
More informationDocument subject to ISO 50001 Requirements
Document subject to 4.1 General requirements The organization shall: a) b) establish, document, implement, maintain and improve an EnMS in accordance with the requirements of this International Standard;
More informationQuality Manual. DuraTech Industries, Inc. 3216 Commerce Street La Crosse, WI 54603 MANUAL SERIAL NUMBER 1
Quality Manual Approval Page Document: QA1000 Issue Date: 5/29/1997 Page 1 of 17 Revision Date: 5/20/2013 DuraTech Industries, Inc. 3216 Commerce Street La Crosse, WI 54603 MANUAL SERIAL NUMBER 1 This
More informationImplementing an Energy Management System Using ISO 50001
Implementing an Energy Management System Using ISO 50001 This article will address issues related to sustainability efforts, through energy management as it relates to ISO 50001, Energy Management System
More informationISO 9001 Quality Management Systems Professional
ISO 9001 Quality Management Systems Professional Professional Certifications Sample Questions Sample Questions 1. The non-fulfillment of a specified requirement is called a: A. Concession B. Nonconformity
More information2013 Schedule 2 Billing Process Presentation
2013 Schedule 2 Billing Process Presentation Workplace Safety and Insurance Board Commission de la sécurité professionnelle et de l assurance contre les accidents du travail 0 Schedule 2 Employers Benefit
More informationWORKPLACE SAFETY AND INSURANCE APPEALS TRIBUNAL DECISION NO. 2444/06
WORKPLACE SAFETY AND INSURANCE APPEALS TRIBUNAL DECISION NO. 2444/06 BEFORE: M. Crystal: Vice-Chair HEARING: December 4, 2006 at Toronto Written case DATE OF DECISION: December 5, 2006 NEUTRAL CITATION:
More informationTable of Contents. Preface 1.0 Introduction 2.0 Scope 3.0 Purpose 4.0 Rationale 5.0 References 6.0 Definitions
Table of Contents Preface 1.0 Introduction 2.0 Scope 3.0 Purpose 4.0 Rationale 5.0 References 6.0 Definitions 7.0 Objectives and User Needs of a Regulatory Audit Report 7.1 Audit report objectives 7.2
More informationENVIRONMENTAL, HEALTH & SAFETY MANAGEMENT SYSTEMS MANUAL
September 7, 202 940. General Requirements (ISO 400 4.; OHSAS 800 4.).. Alcoa Fastening Systems Republic Operations (AFS Republic) has established, documented, implemented, maintains, and continuously
More informationUL Qualified Firestop Contractor Program Requirements April 2012
UL Qualified Firestop Contractor Program Requirements April 2012 For more information, please contact your local UL Field Representative INTRODUCTION: In order for a firestop systems installer/contractor
More informationAS/NZS 4801:2001. Safety Management Systems (SMS) Self-Assessment Checklist. Revision 1 (January 2014)
AS/NZS 4801:2001 Safety Management Systems (SMS) Self-Assessment Checklist This document restates the requirements of AS/NZS 4801:2001 for Safety Management Systems (SMS) and has been developed to assist
More informationModule 17: EMS Audits
Module 17: EMS Audits Guidance...17-2 Figure 17-1: Linkages Among EMS Audits, Corrective Action and Management Reviews...17-5 Tools and Forms...17-7 Tool 17-1: EMS Auditing Worksheet...17-7 Tool 17-2:
More informationEMS ISO 14001 Checklist
ES IS 14001 hecklist rganization: Auditor: Date: = ajor onconformity = inor onconformity = bservation = omment 4.1 General Requirements 4.1 General requirements maintained an environmental management system
More informationISO 9001 : 2008 QUALITY MANAGEMENT SYSTEM AUDIT CHECK LIST INTRODUCTION
INTRODUCTION What auditors should look for: the items listed in these headings that the ISO requirement is met that the requirement is met in the manner described in the organization's documentation Page
More informationCOMBINE. Part B. Manual for Marine Monitoring in the. Programme of HELCOM. General guidelines on quality assurance for monitoring in the Baltic Sea
Manual for Marine Monitoring in the COMBINE Programme of HELCOM Part B General guidelines on quality assurance for monitoring in the Baltic Sea Annex B-3 Quality audit ANNEX B-3 QUALITY AUDIT 1. Objectives
More informationQUALITY MANAGEMENT SYSTEM (QMS) ASSESSMENT CHECKLIST
1. QUALITY MANAGEMENT SYSTEM QUALITY MANAGEMENT SYSTEM (QMS) ASSESSMENT CHECKLIST 1.1 Quality Management System General 1.1.1 Is objective evidence available to demonstrate that the MDSAP site has defined,
More informationEuropean Forum for Good Clinical Practice Audit Working Party
European Forum for Good Clinical Practice Audit Working Party REVISION OF THE ENGAGE 1 AUDITING GUIDELINE. AN OPTIONAL GUIDELINE FOR GCP COMPLIANCE AND QUALITY MANAGEMENT SYSTEMS AUDITING This document
More informationBest Practices Defined:
Workers Compensation Fund AIHA/ANSI Z-10-2005 Standard for Occupational Health and Safety Management Systems Presented by Objectives: Best Practices Defined Outline and Review the Z-10 Standard Auditing
More informationCP14 ISSUE 5 DATED 1 st OCTOBER 2015 BINDT Audit Procedure Conformity Assessment and Certification/Verification of Management Systems
Certification Services Division Newton Building, St George s Avenue Northampton, NN2 6JB United Kingdom Tel: +44(0)1604-893-811. Fax: +44(0)1604-893-868. E-mail: pcn@bindt.org CP14 ISSUE 5 DATED 1 st OCTOBER
More informationFINAL DOCUMENT. Guidelines for Regulatory Auditing of Quality Management Systems of Medical Device Manufacturers Part 1: General Requirements
GHTF/SG4/N28R4:2008 FINAL DOCUMENT Title: Guidelines for Regulatory Auditing of Quality Management Systems of Medical Device Manufacturers Authoring Group: GHTF Study Group 4 Endorsed by: The Global Harmonization
More informationQUALITY MANUAL 3 KENDRICK ROAD WAREHAM, MA 02571 508-295-9591 FAX 508-295-6752
QUALITY MANUAL 3 KENDRICK ROAD WAREHAM, MA 02571 508-295-9591 FAX 508-295-6752 Section 1. REVISION STATUS Revision 01 Initial Issue 02/13/95 Revision 02 ECO No.Q-0032 05/07/96 Revision 03 ECO No.97171
More informationQuality Management Plan Procedure
Quality Management Plan Procedure Check the Capital Project Delivery website to ensure this is the current version. Table of Contents Quality Management Plan Overview... 1 Introduction... 1 Objectives...
More informationINTEGRATED MANAGEMENT SYSTEM MANUAL IMS. Based on ISO 9001:2008 and ISO 14001:2004 Standards
INTEGRATED MANAGEMENT SYSTEM MANUAL IMS Based on ISO 9001:2008 and ISO 14001:2004 Standards Approved by Robert Melani Issue Date 30 December 2009 Issued To Management Representative Controlled Y N Copy
More informationOH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable)
OH&S MANAGEMENT SYSTEM CHECKLIST - AS 4801:2001 (STATUS A = Acceptable; N = Not Acceptable; N/A = Not Applicable) 4.1 General Requirements 4.2 OHS policy Has the organisation an established and maintained
More informationP-01 Certification Procedure for QMS, EMS, EnMS & OHSAS. Procedure. Application, Audit and Certification
Procedure Application, Audit and Certification Document No. P-01 Version 9.00 Date of Issue Nov 02, 2015 Reviewed & Approved by Name Designation Signature Date Kaushal Goyal Managing Director Nov 02, 2015
More informationSUPPLIER QUALITY SYSTEM AUDIT
Company Name: Date: Company Address: Quality Assurance Mgr: President: Number of employees: Is your company receptive to source inspection? List all standards the quality system is based on Web Page: Company
More informationQUALITY MANAGEMENT SYSTEM Corporate
Page 1 of 12 4 Quality Management System 4.1 General Requirements The Peerless Pump Quality Management System shall include: Documented statements of a quality policy and of quality objectives; A quality
More informationISO 9001:2008 Clause 8.2.2 PR018 Internal Audit Procedure
ISO 9001:2008 Clause 8.2.2 PR018 Internal Audit Procedure Strode Park Foundation Page 1 of 9 Approvals The signatures below certify that this procedure has been reviewed and accepted, and demonstrates
More informationTRANSPORT CANADA MARINE SAFETY PLEASURE CRAFT OPERATOR COMPETENCY PROGRAM QUALITY MANAGEMENT SYSTEM FOR ACCREDITATION
TRANSPORT CANADA MARINE SAFETY PLEASURE CRAFT OPERATOR COMPETENCY PROGRAM FOR ACCREDITATION OF COURSE PROVIDERS PROJECT TRANSITION AND IMPLEMENTATION PLEASURE CRAFT OPERATOR COMPETENCY PROGRAM QUALITY
More informationISO 9001 Quality Systems Manual
ISO 9001 Quality Systems Manual Revision: D Issue Date: March 10, 2004 Introduction Micro Memory Bank, Inc. developed and implemented a Quality Management System in order to document the company s best
More informationJonathan Wilson. Sector Manager (Health & Safety)
Jonathan Wilson Sector Manager (Health & Safety) OHSAS 18001:2007 Making Life Easier For Health & Safety Managers Workshop Agenda 1. Introduction 2. Why Manage Health & Safety 3. OHSAS 18001 and OHSMS
More informationSupplier Quality Management System Audit Checklist (ISO 9000:2000, TS 16949:2002)
Supplier Quality Management System Audit Checklist (ISO 9000:2000, TS 16949:2002) Supplier: Plant/Location: Date: Audit Team: Scope of Audit: Number of C.A.R. s: Corrective Action Due: Potential suppliers
More informationEnvironmental Management System Tool
Environmental Management System Tool How to use this Tool The Department of the Environment, Water, Heritage and the Arts (DEWHA) has developed the EMS Tool to assist office based organisation who are
More informationAuditing Process-based Quality Management Systems. Charlie Cianfrani and Jack West
Auditing Process-based Quality Management Systems Charlie Cianfrani and Jack West Agenda Course objectives What is an audit? How to prepare for and plan an audit How to conduct an audit How to report
More informationQuality Management System Manual
Quality Management System Manual This manual has been reviewed and approved for use by: Jack Zazulak President, Aurora Machine Limited March 07, 2011 Date - Copyright Notice - This document is the exclusive
More informationUNCONTROLLED DOCUMENT ENVIRONMENTAL MANAGEMENT SYSTEM MANUAL UNCONTROLLED DOCUMENT
ENVIRONMENTAL MANAGEMENT SYSTEM MANUAL TABLE OF CONTENTS 1.0 PURPOSE...1 2.0 SCOPE...1 3.0 ISSUE AND UPDATE...1 4.0 ENVIRONMENTAL POLICY...2 5.0 ENVIRONMENTAL ASPECTS...2 6.0 LEGAL AND OTHER REQUIREMENTS...3
More informationWORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES
WHS UNIT WORKPLACE HEALTH AND SAFETY AUDITING GUIDELINES Contents 1 Purpose... 1 2 Scope... 1 3 Definitions... 1 4 Responsibilities... 1 4.1 WHS Unit... 1 4.2 Auditor(s)... 1 4.3 Managers of Faculties
More informationSHE Standards. Safety, Health and Environmental Protection Standards
SHE Standards Safety, Health and Environmental Protection Standards Revision 2.01 December 2010, Valid from December 01, 2010 2 Contents SHE Standards Contents Foreword 3 1 Management Process 1.1 Policy,
More informationAuditing Health and Safety Management Systems. 4th Edition
Auditing Health and Safety Management Systems 4th Edition SafetyMAP: AUDITING HEALTH AND SAFETY MANAGEMENT SYSTEMS 4th Edition Published by the Victorian WorkCover Authority Victorian WorkCover Authority
More informationMINISTRY OF THE ENVIRONMENT DRINKING WATER QUALITY MANAGEMENT STANDARD
MINISTRY OF THE ENVIRONMENT DRINKING WATER QUALITY MANAGEMENT STANDARD October 2006 Introduction The Safe Drinking Water Act, 2002 (SDWA) requires Owners and Operating Authorities of municipal residential
More informationED FAGAN INC. QUALITY SYSTEM MANUAL
ED FAGAN INC. QUALITY SYSTEM MANUAL APPROVED BY: Ed Fagan President ED FAGAN INC. January 13, 2010 TABLE OF CONTENTS 1. PURPOSE AND SCOPE 2 2. PRODUCTS, SERVICES AND CAPABILITIES 2 3. REVISION HISTORY
More informationONTARIO'S DRINKING WATER QUALITY MANAGEMENT STANDARD
July 2007 ONTARIO'S DRINKING WATER QUALITY MANAGEMENT STANDARD POCKET GUIDE PIBS 6278e The Drinking Water Quality Management Standard (DWQMS) was developed in partnership between the Ministry of the Environment
More informationISO 9001:2008 STANDARD OPERATING PROCEDURES MANUAL
8200 Brownleigh Drive Raleigh, NC 27617-7423 Phone: (919) 510-9696 Fax: (919) 510-9668 ISO 9001:2008 STANDARD OPERATING PROCEDURES MANUAL ALLIANCE OF PROFESSIONALS & CONSULTANTS, INC. - 1 - Table of Contents
More informationEffective Occupational Safety and Health Management System: Integration of OHSAS 18001, ILO-OSH 2001, and OR-OSHA.
Effective Occupational Safety and Health Management System: Integration of OHSAS 18001, ILO-OSH 2001, and OR-OSHA. By Awwad J. Dababneh PhD, CPE. University of Jordan Faculty of Engineering and Technology
More informationFINE LOGISTICS. Quality Manual. Document No.: 20008. Revision: A
FINE LOGISTICS Quality Manual Document No.: 20008 Revision: A 20008 Rev. A FINE LOGISTICS, Quality Manual Page 1 of 24 Quality Manual: Table of contents Number Section Page 1. GENERAL 3 1.1 Index and revision
More informationGood practice: Application of EN ISO 14065 (management system)
EUROPEAN COMMISSION DIRECTORATE-GENERAL CLIMATE ACTION Directorate A - International and Climate Strategy CLIMA.A.3 - Monitoring, Reporting, Verification Good practice: Application of EN ISO 14065 (management
More informationQUALITY MANUAL ISO 9001. Quality Management System
Page 1 of 20 QUALITY MANUAL ISO 9001 Quality Management System Printed copies are not controlled unless marked "CONTROLLED". Upon receipt of this document, discard all previous copies. Page 2 of 20 Approval
More informationPAS 99: Integrated Management Systems Checklist IMPLEMENTATION CHECKLIST
PAS 99: Integrated Management Systems Checklist IMPLEMENTATION CHECKLIST INTRODUCTION This checklist is intended to be used by those organizations who are either looking at implementing an integrated management
More informationThe Encana Service Provider Safety Manual
Practice Service Provider Equipment Specifications & Quality Management Owner: USA Division Safety Revision No: 00 Date last revised: 08/21/2013 1.0 Applicability This practice applies to all Encana Oil
More informationSetting Up A Complaint Handling System. Presented by Sue Jacobs Principal Consultant, QMS Consulting, Inc. Complaint Systems
Setting Up A Complaint Handling System Presented by Sue Jacobs Principal Consultant, QMS Consulting, Inc. January 2008 ~ Orlando, Florida QMS Consulting, Inc. 2008 1 Complaint Systems Written Procedures
More informationManaging Occupational Health and Safety on Queensland Government Building Projects A Management Systems Approach D Evans
OCCUPATIONAL HEALTH AND SAFETY THE CARING CLIENT? Case Study MANAGING OCCUPATIONAL HEALTH AND SAFETY ON QUEENSLAND GOVERNMENT BUILDING PROJECTS A MANAGEMENT SYSTEMS APPROACH David Evans Queensland Department
More informationTOTAL QUALITY MANAGEMENT II QUALITY AUDIT
TOTAL QUALITY MANAGEMENT II Chapter 13: QUALITY AUDIT Dr. Shyamal Gomes Introduction: The term audit was defined in the 16th Century as the official examination of the accounts with verification by reference
More informationSoftware Quality Subcontractor Survey Questionnaire INSTRUCTIONS FOR PURCHASE ORDER ATTACHMENT Q-201
PURCHASE ORDER ATTACHMENT Q-201A Software Quality Subcontractor Survey Questionnaire INSTRUCTIONS FOR PURCHASE ORDER ATTACHMENT Q-201 1. A qualified employee shall be selected by the Software Quality Manager
More informationISO 9001 Quality Management Systems. Tips for Internal Auditing
ISO 9001 Quality Management Systems Tips for Internal Auditing ...taking steps to improving your internal auditing. ISO 9001 Tips for Internal Auditing If you are developing or modifying your internal
More informationCompliance Management Systems
Certification Scheme Y03 Compliance Management Systems ISO 19600 ONR 192050 Issue V2.1:2015-01-08 Austrian Standards plus GmbH Dr. Peter Jonas Heinestraße 38 A-1020 Vienna, Austria E-Mail: p.jonas@austrian-standards.at
More informationIAS ACCREDITED INSPECTION AGENCIES: GUIDELINES FOR CONDUCTING INTERNAL AUDITS AND MANAGEMENT REVIEWS. Revised January, 2016
IAS ACCREDITED INSPECTION AGENCIES: GUIDELINES FOR CONDUCTING INTERNAL AUDITS AND MANAGEMENT REVIEWS Revised January, 2016 IAS has found that inspection agency personnel are often confused by the requirements
More informationMANAGEMENT SYSTEM FOR A NUCLEAR FACILITY
GUIDE YVL A.3 / 2 June 2014 MANAGEMENT SYSTEM FOR A NUCLEAR FACILITY 1 Introduction 5 2 Scope of application 6 3 Management system 6 3.1 Planning, implementation, maintenance, and improvement of the management
More informationCENTRIS CONSULTING. Quality Control Manual
CENTRIS CONSULTING Quality Control Manual ISO 9001:2008 Introduction Centris Consulting developed and implemented a Quality Management System in order to document the company s best business practices,
More informationQuality, Environmental, Health and Safety Manual Toshiba International Corporation
Quality, Environmental, Health and Safety Manual Toshiba International Corporation Doc. No. QEHS 001 Rev. 19 (12/12) Title: Prepared By: Revision No.: Table of Contents and Cross Reference Ken Mori/Homer
More informationBenchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool
Benchmark OHS Consulting Pty Ltd Self Assessment WHS Audit Tool This WHS Auditing System Tool is to be used as a self-assessment of YOUR COMPANY compliance with AS 4801 and the Work Health and Safety Act
More informationContents of the ISO 9001:2008 Quality System Checklist
Contents of the ISO 9001:2008 Quality System Checklist Page Hyperlinks (click underlines) This SAMPLE document includes 4 clauses of the standard. You receive the Windows.doc file (with hyperlinks). You
More informationRABQSA Certified AS9110 Aerospace Quality Management System Lead Auditor
AGENDA Day 1 8:00 a.m. Administration and Introduction - Icebreaker Exercise Module 1: Management System Auditor Certification Module 2: Quality Management Systems - Overview Module 15: Requirements for
More informationMEAT GRADING AND CERTIFICATION BRANCH QUALITY MANUAL
United States Department of Agriculture Marketing and Regulatory Programs Agricultural Marketing Service Livestock and Seed Program Meat Grading & Certification Branch MGC Instruction 800 May 9, 2005 Page
More informationCommitted to Environment, Health, & Safety
Committed to Environment, Health, & Safety Environment, Health, and Safety Management System and Policy of W.R. Grace & Co. January 1, 2015 The Grace Environment, Health, and Safety Management System,
More informationQuality Manual. UK Wide Security Solutions Ltd. 1 QM-001 Quality Manual Issue 1. January 1, 2011
Quality Manual 1 QM-001 Quality Manual Issue 1 January 1, 2011 This document is uncontrolled when printed. Please verify with Quality Management Representative 16 Dukes Close, West Way, Walworth Industrial
More informationEnvironmental nonconformity, corrective & preventive action
1.0 Purpose The purposes of this procedure is to define a system for, a) To establish compliance with regulations and requirements of EMS policies, b) Handling and investigation of incidents; mitigation
More informationEagle Machining, Inc. Quality Management System
Eagle Machining, Inc. Quality Management System 1 of 10310 Antoine Drive Bldg D, Houston, Texas 77086 BUSINESS OPERATING MANUAL (QUALITY MANUAL) Revision Date: 08/01/2014 Approved By: Joseph Vu Date: 08/01/2014
More informationDNV GL Assessment Checklist ISO 9001:2015
DNV GL Assessment Checklist ISO 9001:2015 Rev 0 - December 2015 4 Context of the Organization No. Question Proc. Ref. Comments 4.1 Understanding the Organization and its context 1 Has the organization
More informationISO-9001:2000 Quality Management Systems
ISO-9001:2000 Quality Management Systems REQUIREMENTS 10/10/2003 ISO-9001:2000 Requirements 1 Process Based Approach C U S MANAGEMENT RESPONSIBILITY RESOURCE MANAGEMENT C U S T O M Requirements PRODUCT
More information15 Guiding Principles
Health, Safety, Environment and Corporate Social Responsibility 15 Guiding Principles 2013 Message from President and CEO 0 New Gold has a complementary portfolio of assets in different countries and cultures
More informationChecklist. Standard for Medical Laboratory
Checklist Standard for Medical Laboratory Name of hospital..name of Laboratory..... Name. Position / Title...... DD/MM/YY.Revision... 1. Organization and Management 1. Laboratory shall have the organizational
More informationRev: Issue 4 Rev 4 Quality Manual AOP0101 Date: 10/07/13. Quality Manual. CBT Technology, Inc. 358 North Street Randolph, MA 02368
Quality Manual CBT Technology, Inc. 358 North Street Randolph, MA 02368 Issue 4 Revision 4 Note: updates are in italics Page 1 of 18 1.0 Scope and Exclusions Scope This Quality Manual contains policies
More informationWORKPLACE SAFETY AND INSURANCE APPEALS TRIBUNAL DECISION NO. 1617/14
WORKPLACE SAFETY AND INSURANCE APPEALS TRIBUNAL DECISION NO. 1617/14 BEFORE: T. Mitchinson: Vice-Chair HEARING: August 29, 2014 at Sudbury Oral DATE OF DECISION: September 4, 2014 NEUTRAL CITATION: 2014
More informationMTAT.03.243 Software Engineering Management
MTAT.03.243 Software Engineering Management Lecture 17: Other SPI Frameworks and QM Systems Dietmar Pfahl Spring 2014 email: dietmar.pfahl@ut.ee Structure of Lecture 17 Other SPI Frameworks People CMM
More informationImplementation of a Quality Management System for Aeronautical Information Services -1-
Implementation of a Quality Management System for Aeronautical Information Services -1- Implementation of a Quality Management System for Aeronautical Information Services Chapter IV, Quality Management
More informationWORKPLACE SAFETY AND INSURANCE APPEALS TRIBUNAL DECISION NO. 1119/09
WORKPLACE SAFETY AND INSURANCE APPEALS TRIBUNAL DECISION NO. 1119/09 BEFORE: T. Mitchinson: Vice-Chair HEARING: June 3, 2009 at Sudbury Oral DATE OF DECISION: June 8, 2009 NEUTRAL CITATION: 2009 ONWSIAT
More informationQuality Manual Printed copy valid for 24 hours from time of printing unless stamped CONTROLLED COPY in red. Page
Quality Manual Page 1 of 20 Change Log Document Revision Date Description of Change 15/04/09 Initial Release Page 2 of 20 1.0 Scope and Exclusions Scope This Quality Manual contains policies that have
More informationImplementing ISO 9001
If you are faced with implementing ISO 9001, or anticipate it may soon become a requirement for your organization, keep reading. This article identifies reasons to implement the standard, summarizes its
More informationQuality Management System Manual
Effective Date: 03/08/2011 Page: 1 of 17 Quality Management System Manual Thomas C. West Eric Weagle Stephen Oliver President ISO Management General Manager Representative Effective Date: 03/08/2011 Page:
More information1 The purpose of this Code is to provide an international standard for the safe management and operation of ships and for pollution prevention.
International Safety Management (ISM) Code 2002 Preamble 1 The purpose of this Code is to provide an international standard for the safe management and operation of ships and for pollution prevention.
More informationCity of Raleigh Public Utilities Department. Wastewater EMS Manual
City of Raleigh Public Utilities Department Wastewater EMS Manual TABLE OF CONTENTS PAGE 2 Wastewater EMS Manual Table of Contents Management Direction 1) EMS Manual 2) Management Policy Planning 3) Process
More informationQualified Contractor Management System
FCIA Education Program Quality Module UL Qualified Contractor Firm Candidates Management System & Audit Preparation Education FCIA July 8, 2007; November 2007; March 2008 FCIA Management System Education
More information