(800) (562) A Subsidiary of the International Code Council *Revised April 2014

Transcription

1 ICC-ES Evaluation Report ESR-1647* Issued July 2013 This report is subject to renewal August 1, (800) (562) A Subsidiary of the International Code Council DIVISION: THERMAL AND MOISTURE PROTECTION Section: Concrete Roof Tiles REPORT HOLDER: BORAL ROOFING 7575 IRVINE CENTER DRIVE, SUITE 100 IRVINE, CALIFORNIA (949) jay.cruz@boral.com EVALUTION SUBJECT: CONCRETE ROOF TILES: ATLANTIS, BARCELONA 900, BARCELONA-IMPACT, CAPRI, CEDARLITE / CEDARLITE 600, CLASSIC 100, ESPANA / BARCELONA, ESPANA 600, HOMESTEAD SHAKE, HOMESTEAD SLATE, MADERA, MADERA 700, MISSION S / BARCELONA, ROMA, SAXONY, SAXONY 600, SAXONY 700, SAXONY 900, SAXONY-SHAKE, SAXONY-SLATE, SAXONY-COUNTRY SLATE, SAXONY-SPLIT SHAKE, SAXONY SPLIT SLATE, SAXONY-IMPACT, SAXONY 900- IMPACT, SPANISH S, SPANISH S NUEVO, TEJAS ESPANA, VANGUARD ROLL, VILLA, VILLA 600, VILLA 900 AND VILLA 900-IMPACT 1.0 EVALUATION SCOPE Compliance with the following codes: 2012 and 2009 International Building Code (IBC) 2012 and 2009 International Residential Code (IRC) Other Codes (See Section 8.0) Properties evaluated: Fire classification Weather resistance Wind-uplift resistance 2.0 USES The Boral Roofing concrete roof tiles installed over solid sheathing are used as Class A roof coverings in accordance with Section of the IBC and Section R902.1 of the IRC. 3.0 DESCRIPTION 3.1 Interlocking Concrete Roof Tiles: These roof tiles are extruded interlock concrete roof tiles that comply with ASTM C1492 and having interlocking ribs on the longitudinal edges of the tiles to restrict lateral movement and provide a water stop. All roof tiles are designed with anchor lugs except for the Cedarlite and Madera profiles. Mineral coloring oxides are either applied to the exposed surface in a cementitious material or mixed integrally with the tile mix to produce a through-colored product. All roof tiles are cured to reach required strength before shipment. Product designations, dimensions and installed dry weights are indicated in Table 1 of this report. Roof tile profiles are illustrated in Figure Concrete Roof Tiles: Spanish S roof tiles are extruded concrete roof tiles that comply with ASTM C1492. The roof tile is manufactured in the same manner as the roof tiles described in Section 3.1, except the tile is non-interlocking. The roof tile is designed without anchor lugs. The product designation, dimensions and installed dry weight are indicated in Table 1. See Figure 1 for an illustration of the tile. 4.0 INSTALLATION 4.1 General Installation of the Boral Roofing roof tiles must be in accordance with the Concrete and Clay Roof Tile Installation Manual for Moderate Climate Regions, dated March 2010, published by the Tile Roofing Institute and Western States Roofing Contractors Association (hereinafter referred to as the TRI/WSRCA installation manual), and recognized in ESR-2015P, except as otherwise noted in this report. In case of a conflict between the installation manual and this report, this report governs. This report and the TRI/WSRCA installation manual must be available at the jobsite at all times during installation. The roof tiles must be installed on a minimum roof slope of 2 1 / 2 :12 (20.83%). Care must be taken during field installation to ensure that horizontal joints are kept parallel to the eave and vertical joints are at right angles to the eave in order to ensure uniform contact between the tiles and proper fit and appearance. All cracked and broken roof tiles must be replaced. 4.2 Adhesive Set Systems: The Boral Roofing roof tiles may be installed with roof tile adhesives that are recognized in a current ICC-ES evaluation report for use in concrete roofing tile applications. Installation of tiles using these adhesive set systems must be in accordance with the adhesive manufacturer s ICC-ES evaluation report. 4.3 Mortar Set Systems: Except for the Villa 600, Barcelona 600, Saxony 600, Cedarlite/Cedarlite 600 and Madera tiles, the Boral Roofing *Revised April 2014 ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this report, or as to any product covered by the report. Copyright 2014 Page 1 of

2 ESR-1647 Most Widely Accepted and Trusted Page 2 of 10 roof tiles may be installed with mortars that are recognized in a current ICC-ES evaluation report for use in concrete roofing tile applications. Installation of tiles using these mortar set systems must be in accordance with the mortar manufacturer s ICC-ES evaluation report. 4.4 Wind Resistance: Cedarlite / Cedarlite 600, Madera and Madera 700: IBC: Installation of these tiles is limited to the prescriptive parameters of Table for ultimate design wind speeds (V ult ) of 130 mph (209 km/h) or less and mean roof heights of 60 feet (18.3 m) or less. As an alternative, on minimum 7 / 16 -inch-thick (11.1 mm) oriented strand board or minimum 15 / 32 -inch-thick (11.9 mm) plywood, a single corrosion-resistant, buglehead wood screw, in the center fastener hole, may be used in lieu of the two nails required for roof slopes of 3:12 and over. The screw must be of sufficient length to penetrate through the deck a minimum of 3 / 4 inch (19.1 mm). The buglehead screw must have a shank diameter of inch (3.5 mm) and a head diameter of inch (8.3 mm). The tile may be installed with battens. Battens installed must be nominally 1-inch-by-3-inch wood. Each tile must be fastened to the batten with a single corrosion-resistant, buglehead wood screw in the center fastener hole. The screw must penetrate the batten a minimum of 3 / 4 inch (19.1 mm) but must not penetrate the underlayment. The top edge of the tile is aligned with the top of the batten IRC and 2009 IBC and IRC: Installation of these tiles is limited to the prescriptive parameters of Table of the IBC and Section R of the IRC, as applicable, for basic wind speeds (3-second gust) of 100 mph (161 km/h) or less and mean roof heights of 60 feet ( mm) or less for the IBC and 40 feet ( mm) or less for the IRC. See Section for fastening of sheathing with single screw in lieu of two nails for roof slopes of 3:12 and over. Also, see Section for tile installation on battens All Other Tiles Except Cedarlite / Cedarlite 600, Madera and Madera 700: IBC: For ultimate design wind speeds (V ult ) of 130 mph (209 km/h) or less and mean roof heights of 60 feet (18.3 m) or less, tiles must be installed in accordance with the prescriptive parameters of Table of the IBC. For applications beyond these prescriptive parameters, the tiles and the fastening systems must be designed in accordance with Figure 1 of ESR-2015P, Design Considerations for High Wind Applications Under the 2012 IBC and IRC (ASCE 7-10) IRC: For basic wind speeds (3-second gust) of 100 mph (161 km/h) or less and mean roof heights of 40 feet ( mm) or less, tiles must be installed in accordance with the prescriptive parameters of Section R of the IRC. For applications beyond these prescriptive parameters, the tiles and the fastening systems must be designed in accordance with Figure 1 of ESR-2015P, Design Considerations for High Wind Applications Under the 2012 IBC and IRC (ASCE 7-10) IBC and IRC: For basic wind speeds (3-second gust) of 100 mph (161 km/h) or less and mean roof heights of 60 feet ( mm) or less for the IBC or 40 feet ( mm) or less for the IRC, tiles must be installed in accordance with the prescriptive parameters of Table of the IBC or Section R of the IRC, as applicable. For applications beyond these prescriptive parameters, the tiles and the fastening systems must be designed to withstand the aerodynamic wind uplift moment in accordance with the section on Design Considerations for High Wind Applications in Appendix B of the TRI/WSRCA installation manual. The generic required aerodynamic uplift moment, determined in accordance with Tables 5A through 6D of the TRI/WSRCA installation manual, must be multiplied by the tile factor ratio in Table 2 to obtain the required aerodynamic uplift moment for the specific roof tile being installed. The allowable aerodynamic uplift moment for the roof tile fastening system selected from Table 7A of the TRI/WSRCA installation manual, must be equal to or greater than the required aerodynamic uplift moment for the specific roof tile being installed. 4.5 Fire Classification: When installed in accordance with this report, the Boral Roofing concrete roof tiles are Class A roof coverings in accordance with IBC Section and IRC Section R When roof tiles are installed with a roof tile adhesive, installation must be in accordance with ESR CONDITIONS OF USE The Boral Roofing extruded concrete roof tiles described in this report comply with, or are suitable alternatives to what is specified in, those codes listed in Section 1.0 of this report, subject to the following conditions: 5.1 The roof tiles must be installed in accordance with this report, the applicable code and the TRI/WSRCA installation manual. In case of a conflict between the installation manual and this report, this report must govern. 5.2 The roof decking and roof framing system must be designed for the appropriate loads determined in accordance with the applicable code. 5.3 The Boral Roofing concrete roof tiles are produced at the manufacturing facilities specified in Table 1 under a quality control program with inspections by ICC-ES. 6.0 EVIDENCE SUBMITTED Data in accordance with the ICC-ES Acceptance Criteria for Clay and Concrete Roof Tiles (AC180), dated February IDENTIFICATION The underside of each field tile, except for Cedarlite / Cedarlite 600, Madera 700 and Madera tiles, is imprinted with the MonierLifetile or Boral Roofing logo (Figure 2) or the name MonierLifetile, Boral, Boral Lifetile or Vostile. Cedarlite / Cedarlite 600, Madera 700 and Madera tiles have an M imprinted on the top side of each tile. Each shipping pallet must have a label bearing the Boral Roofing name; the tile designation; manufacturing location and address; color; SAP number; quantity of tiles per pallet; production date; installed weight; and the evaluation report number (ESR-1647). 8.0 OTHER CODES In addition to the codes referenced in Section 1.0, the products in this report were evaluated for compliance with the requirements of the following codes: 2006 International Building Code (IBC) 2006 International Residential Code (IBC) The Boral Roofing concrete roof tiles installed over solid or spaced sheathing are considered Class A in accordance with the exception to 2006 IBC Section and 2006 IRC Section R All other conditions of recognition are as described in Sections 2.0 through 7.0.

3 ESR-1647 Most Widely Accepted and Trusted Page 3 of 10 TILE DESIGNATION TABLE 1 TILE DIMENSIONS, WEIGHTS AND MANUFACTURING FACILITIES INSTALLED DRY WEIGHT 1 (psf) LENGTH DIMENSIONS 2 (in.) WIDTH MANUFACTURING FACILITY Atlantis - Slate / / 8 Pompano Atlantis - Textured / / 8 Pompano Barcelona Lake Wales Barcelona Lathrop Barcelona - Impact / 2 13 Katy Capri / 8 Lake Wales Cedarlite / Cedarlite / 2 13 Gilroy Espana / Barcelona / 8 Henderson Espana / Barcelona / 8 Lake Wales Espana / Barcelona / 8 Lathrop Espana / Barcelona / 8 Rialto Espana 600 / Barcelona / 8 Rialto Saxony Hartford Slate Stockton Madera / 2 13 Gilroy Madera / 2 13 Gilroy Mission S / Barcelona / 2 13 Phoenix Saxony Split Old English Thatch Stockton Saxony - Country Shake / 2 13 Katy Saxony - Country Shake / 8 Rialto Saxony - Country Slate / 2 13 Katy Saxony - Country Slate / 8 Rialto Saxony - Country Split Shake / 2 13 Katy Saxony - English Thatch / 2 13 Katy Saxony - English Thatch / 8 Rialto Saxony - English Thatch / 8 Lake Wales Saxony - Shake / 2 13 Katy Saxony - Shake / 2 13 Phoenix Saxony - Shake / 8 Rialto Saxony - Shake / 8 Lake Wales Saxony - Shake Denver Saxony Shake Lathrop Saxony Shake Stockton Saxony - Slate / 2 13 Phoenix Saxony - Slate / 2 13 Katy Saxony - Slate / 8 Rialto Saxony - Slate / 8 Lake Wales Saxony Slate Lathrop Saxony Slate Stockton Saxony Country Slate Stockton Saxony - Slate Denver Saxony - Country Slate Denver Saxony - Split Old English Thatch Denver Saxony - Split Shake / 8 Rialto Saxony - Split Shake / 8 Lake Wales Saxony - Split Slate / 8 Rialto For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m 2.

4 ESR-1647 Most Widely Accepted and Trusted Page 4 of 10 TILE DESIGNATION TABLE 1 TILE DIMENSIONS, WEIGHTS AND MANUFACTURING FACILITIES (Continued) INSTALLED DRY WEIGHT 1 (psf) LENGTH DIMENSIONS 2 (in.) WIDTH MANUFACTURING FACILITY Saxony - Split Slate / 8 Lake Wales Saxony Shake Stockton Saxony Slate Stockton Saxony Split Shake Stockton Saxony Shake Stockton Saxony Slate Stockton Saxony 700 Split Shake Stockton Saxony Shake Rialto Saxony Slate Rialto Saxony 700 Split Shake Rialto Saxony Shake Henderson Saxony Slate Henderson Saxony Country Slate Henderson Saxony Shake Lake Wales Saxony Slate Lake Wales Saxony 900 Split Shake Lake Wales Saxony 900 Country Slate Lake Wales Spanish S / 8 Pompano Tejas Espana / Barcelona / 2 13 Katy Vanguard Roll / 2 13 Pompano Villa / 2 13 Phoenix Villa Rialto Villa Denver Villa Rialto Villa Stockton Villa Stockton Villa / 2 13 Katy Villa Lake Wales Spanish S Nuevo / 4 Lake Wales Saxony Rialto Saxony Rialto Saxony Impact ½ 13 Katy Saxony Impact Denver Saxony 900 Impact Stockton Villa 900 Impact Denver Classic ½ 13 Tacoma Homestead Shake ½ 13 Tacoma Homestead Slate ½ 13 Tacoma Roma ½ 13 Tacoma Saxony Shake ½ 13 Tacoma Saxony Slate ½ 13 Tacoma Saxony Country Slate ½ 13 Tacoma Saxony Split Shake ½ 13 Tacoma Saxony Split Slate ½ 13 Tacoma Villa ½ 13 Tacoma For SI: 1 inch = 25.4 mm, 1 psf = 4.88 kg/m 2. 1 Installed dry weight is based on a 3-inch headlap. 2 All dimensions are nominal.

5 ESR-1647 Most Widely Accepted and Trusted Page 5 of 10 TILE DESIGNATION Capri Mission S / Barcelona Saxony 2 Split Old English Thatch Tejas Espana Vanguard Roll Villa Classic 100 Homestead - Shake Homestead - Slate Roma Saxony Impact TABLE 2 TILE FACTORS AND TILE FACTOR RATIOS TILE FACTOR (ft 3 ) (Base Tile Factor) TILE FACTOR RATIO 1 Atlantis Slate / Atlantis Textured Spanish S Spanish S Nuevo Espana / Barcelona Espana 600 / Barcelona 600 Barcelona 900 Barcelona - Impact Saxony 600 Saxony 700 Saxony 900 Saxony 900 Hartford Slate Saxony 900 Split Old English Thatch Villa 600 Villa 900 Villa 900 Impact Saxony 900 Impact Tile factor ratio = tile factor / Base tile factor of ft 3. See Section of this report and Appendix B of the TRI/WSRCA installation manual for additional details. 2 Saxony includes the following profiles: Saxony Shake, Slate, Split Shake, Split Slate, Country Shake, Country Slate, Country Split Shake, English Thatch and Split Old English Thatch.

6 ESR-1647 Most Widely Accepted and Trusted Page 6 of 10 Atlantis Slate Atlantis Textured Espana / Barcelona Barcelona 900 Espana 600 / Barcelona 600 Barcelona - Impact FIGURE 1 TILE ILLUSTRATIONS

7 ESR-1647 Most Widely Accepted and Trusted Page 7 of 10 Madera Madera 700 Cedarlite/Cedarlite 600 Saxony Impact Saxony 900 Impact Saxony Country Slate Saxony 900 Country Slate FIGURE 1 TILE ILLUSTRATIONS (Continued)

8 ESR-1647 Most Widely Accepted and Trusted Page 8 of 10 Saxony 900 Split Old English Thatch Saxony Split Old English Thatch Saxony Impact Saxony 900 Impact Saxony Split Shake FIGURE 1 TILE ILLUSTRATIONS (Continued)

9 ESR-1647 Most Widely Accepted and Trusted Page 9 of 10 Villa Villa 600 Villa 900 Villa 900 Impact Spanish S Nuevo Nail hole may be located on the pan depending on manufacturing location. FIGURE 1 TILE ILLUSTRATIONS (Continued)

10 ESR-1647 Most Widely Accepted and Trusted Page 10 of 10 FIGURE 1 TILE ILLUSTRATIONS (Continued) FIGURE 2 MONIERLIFETILE LOGO OR BORAL ROOFING LOGO

11 ICC-ES Evaluation Report ESR-1647 CBC and CRC Supplement* Reissued July 2013 This report is subject to renewal August 1, (800) (562) A Subsidiary of the International Code Council DIVISION: THERMAL AND MOISTURE PROTECTION Section: Concrete Roof Tiles REPORT HOLDER: BORAL ROOFING 7575 IRVINE CENTER DRIVE, SUITE 100 IRVINE, CALIFORNIA (949) jay.cruz@boral.com EVALUATION SUBJECT: CONCRETE ROOF TILES: ATLANTIS, BARCELONA 900, BARCELONA IMPACT, CAPRI, CEDARLITE / CEDARLITE 600, CLASSIC 100, ESPANA / BARCELONA, ESPANA 600, HOMESTEAD SHAKE, HOMESTEAD SLATE, MADERA, MADERA 700, MISSION S / BARCELONA, ROMA, SAXONY, SAXONY 600, SAXONY 700, SAXONY 900, SAXONY SHAKE, SAXONY SLATE, SAXONY COUNTRY SLATE, SAXONY SPLIT SHAKE, SAXONY SPLIT SLATE, SAXONY IMPACT, SAXONY 900 IMPACT, SPANISH S, SPANISH S NUEVO, TEJAS ESPANA, VANGUARD ROLL, VILLA, VILLA 600, VILLA 900 AND VILLA 900 IMPACT 1.0 EVALUATION SCOPE Compliance with the following codes: 2010 California Building Code 2010 California Residential Code Properties evaluated: Fire classification Weather resistance Wind-uplift resistance 2.0 California Building Code (CBC) The Boral Roofing concrete roof tiles described in the master report ESR-1647 may be used where a Class A roof covering complying with CBC Section , a Class B roof covering complying with CBC Section , or a Class C roof covering complying with CBC Section is required, provided installation is in accordance with the master report and the additional requirements of Sections and 1511 of the CBC. The roof tiles may be used in the construction of new buildings located in a Fire Hazard Severity Zone within State Responsibility Areas or any Wildland Urban Interface Fire Area, provided installation is also in accordance with the master report and the additional requirements of Sections 701A.3 and 705A of the CBC. 3.0 California Residential Code (CRC) The Boral Roofing concrete roof tiles described in the master report ESR-1647 may be used where a Class A roof covering complying with CRC Section R , a Class B roof covering complying with CRC Section R , or a Class C roof covering complying with CRC Section R is required, provided installation is in accordance with the master report and the additional requirements of Section R905.3 of the CRC. The roof tiles may be used in the construction of new buildings located in any Wildland Urban Interface Fire Area, provided installation is also in accordance with the master report and the additional requirements of Sections R and R327.5 of the CRC. The products recognized in this supplement have not been evaluated for compliance with the International Wildland Urban Interface Code. This supplement expires concurrently with the master report reissued July 2013, revised April *Revised April 2014 ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this report, or as to any product covered by the report. Copyright 2014 Page 1 of

12 ICC-ES Evaluation Report (800) (562) ESR-1647 FBC Supplement* Reissued July 2013 This report is subject to renewal August 1, A Subsidiary of the International Code Council DIVISION: THERMAL AND MOISTURE PROTECTION Section: Concrete Roof Tiles REPORT HOLDER: BORAL ROOFING 7575 IRVINE CENTER DRIVE, SUITE 100 IRVINE, CALIFORNIA (949) jay.cruz@boral.com EVALUATION SUBJECT: CONCRETE ROOF TILES: ATLANTIS, BARCELONA 900, BARCELONA IMPACT, CAPRI, CEDARLITE / CEDARLITE 600, CLASSIC 100, ESPANA / BARCELONA, ESPANA 600, HOMESTEAD SHAKE, HOMESTEAD SLATE, MADERA, MADERA 700, MISSION S / BARCELONA, ROMA, SAXONY, SAXONY 600, SAXONY 700, SAXONY 900, SAXONY SHAKE, SAXONY SLATE, SAXONY COUNTRY SLATE, SAXONY SPLIT SHAKE, SAXONY SPLIT SLATE, SAXONY IMPACT, SAXONY 900 IMPACT, SPANISH S, SPANISH S NUEVO, TEJAS ESPANA, VANGUARD ROLL, VILLA, VILLA 600, VILLA 900 AND VILLA 900 IMPACT 1.0 EVALUATION SCOPE Compliance with the following codes: 2010 Florida Building Code Building 2010 Florida Building Code Residential Properties evaluated: Fire classification Weather resistance Wind uplift resistance 2.0 PURPOSE OF THIS SUPPLEMENT This supplement is issued to indicate that the Concrete Roof Tiles described in the master report ESR-1647 comply with the 2010 Florida Building Code Building and the 2010 Florida Building Code Residential, when designed and installed in accordance with the master evaluation report under this additional condition: The Boral Roofing extruded concrete roof tiles must be installed in accordance with the recommendations of the FRSA/TRI Installation Manual. Use of the concrete roof tiles described in the master evaluation report for compliance with the High Velocity Hurricane Zone provisions of the 2010 Florida Building Code Building, and the 2010 Florida Building Code Residential has not been evaluated, and is outside the scope of this supplement. For products falling under Florida Rule 9B-72, verification that the report holder s quality assurance program is audited by a quality assurance entity approved by the Florida Building Commission for the type of inspections being conducted is the responsibility of an approved validation entity (or the code official when the report holder does not possess an approval by the Commission). This supplement expires concurrently with the master report reissued July 2013, revised April *Revised April 2014 ICC-ES Evaluation Reports are not to be construed as representing aesthetics or any other attributes not specifically addressed, nor are they to be construed as an endorsement of the subject of the report or a recommendation for its use. There is no warranty by ICC Evaluation Service, LLC, express or implied, as to any finding or other matter in this report, or as to any product covered by the report. Copyright 2014 Page 1 of