NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK:
|
|
|
- Blake O’Neal’
- 8 years ago
- Views:
Transcription
1 ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 120 ISO nbr LRC QMS issued by L.R.Q.A. ATEX nbr issued by B.V. PED nbr COV /01 issued by L.R.V. ISO nbr I /1-/2 issued by TÜV On request S.I.L. 3 According to IEC VALVE WITH PNEUMATIC ACTUATORS, LIMIT SWICHES AND GEAR BOX CONSTRUCTION IN ACCORDING TO: ANSI B16.34 BS EN On request FIRE SAFE According to ISO ISO-FT FULL BORE ACCORDING TO ISO BALL VALVES "3 WAY WAFER" FULL BORE 120 ROBINETS A BOISSEAU SPHERIQUE 3 VOIES WAFER PASSAGE INTEGRAL 120 KUGELHÄHNE "3 WEGE KOMPAKTHAHN" VOLLER DURCHGANG 120 WEB SITE:
2 ISO 9001:2008 by L.R. VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE" VOLLER DURCHGANG 90 CONSTRUCTION IN ACCORDING TO: ANSI B BS EN DN CONSIGLIATO RIDUTTORE MANUALE -MANUAL GEAR BOX SUGGESTED -REDUCTEUR MANUEL CONSEILLE -EMPFEHLEN WIR EIN HANDGETRIEBE POSIZIONI OTTENIBILI OBTAINABLE POSITIONS POSITIONS OBTENABLES MÖGLICHE STELLUNGEN ACCOPPIAMENTO VALVOLA ATTUATORE CONNECTION VALVE ACTUATOR ACCOUPLEMENT ROBINET- ACTIONNEUR ZUSAMMENBAU KUGELHAHN ANTRIEB ISO-5211
3 N * 4* 5* * 10* DESCRIZIONE BESCHREIBUNG CORPO BODY CORPS KÖRPER GHIERA INSERT EMBOUT GEWINDEDRUCKRING O-RING ANELLO SEAL ANNEAU DICHTUNGSRING SEDE SEAT SIEGE SITZRING SFERA BALL BOULE KUGEL DISPOSITIVO ANTISTATICO ANTISTATIC DEVICE CONTACT ANTISTATIQUE ANTISTATIK VORRICHTUNG STELO STEM TIGE SPINDEL BUSSOLA STEM SEAL JOINT TIGE UNTERE SPINDELABDICHTUNG PACCO A V CHEVRON RINGS JOINT A V 3 FACHE DACHMANSCHETTE MATERIALI MATERIALS MATERIAUX WERKSTOFFE ASTM A105 ASTM A 182 F316- A479 S31600 ASTM A105 ASTM A 182 F316- A479 S31600 N FKM (VITON) 13 P.T.F.E. 14 P.T.F.E. / R.P.T.F.E. (OPTIONAL) 15 ASTM A182 F304-A479 S30400 ASTM A351 CF8 DN 40 ASTM A182 F316-A479 S ASTM A479 S ASTM A182 F304 A479 S30400 ASTM A182 F316 A479 S31600 DN 40 P.T.F.E. 19 P.T.F.E. / GRAFITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHITE P.T.F.E. / GRAPHIT DESCRIZIONE BESCHREIBUNG PREMIBUSSOLA PRESSING BUSH PRESSE RONDELLE STOPFBUCHSDRUCKRING MOLLE A TAZZA SPRING WASHERS RONDELLES BELLEVILLE TELLERFEDERN VITE DI FERMO E FERMO PIN AND STOP PIN PLOT ET PLOT D ARRET ANSCHLAGBOLZEN DADO CONTRODADO NUT LOCK NUT ECROU CONTRE-ECROU MUTTER KONTERMUTTER LEVA WRENCH LEVIER HANDHEBEL LATERALE END LATERAL GEGENGEHÄUSE 18* GUARNIZIONE GASKET JOINT DICHTRING 20 TIRANTE BOLT BOULON ZUGBOLZEN DADO NUT ECROU MUTTEI MATERIALI MATERIALS MATERIAUX WERKSTOFFE ASTM A479 S31600 C72/50Cr V4 X5CrNi17.7 or X12CrNi17.7 UNI UNI 3951 A2-70 GALVANIZED - GALVANIZED - UNI S GALVANIZED ASTM A UNI 5946 Fe 37 ASTM A GALVANIZED ASTM A105 ASTM A 182 F316- A479 S31600 P.T.F.E. ASTM A 193 B7 GALVANIZED UNI S GALVANIZED * RICAMBI CONSIGLIATI RECOMMENDED SPARE PARTS PIECES DE RECHANGE CONSEILLEES ERSATZTEIL EMPHEHLUNG DIMENSIONI DIMENSION DIMENSIONS ABMESSUNGEN DN A B VEDERE SEE VOIR SIEHE C E F M6 M6 M8 M8 M10 M10 M12 M16 ISO F05 F05 F07 F07 F10 F10 F12 F14 G H M DN LEVA SINGOLA P - SINGLE WRENCH ,5 99, LEVIER UNIQUE F U T Z 4 PN STANDARDHANDHEBEL R DN LEVA DOPPIA S - DUAL WRENCH LEVIER DOUBLE - DOPPELHANDHEBEL T Kg Kg DATI E CARATTERISTICHE SOGGETTI A VARIAZIONI SENZA PREAVVISO SPECIFICATIONS SUBJECT TO MODIFICATION WITHOUT PRIOR NOTICE TOUS DROITS DE MODIFICATION RESERVES KONSTRUKTIONSÄNDERUNGEN VORBEHALTEN ASTM A105 ASTM / A 182 F316- A479 S31600 ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
4 ISO 9001:2008 by L.R. VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN ONLY FOR VALVES DN 50 FORO DI BILANCIAMENTO BALANCING HOLE TROU DE BALANCEMENT DRUCKENTLASTUNGSBOHRUNG AVAILABLE ON DN 40 EXECUTION 4-12 EXECUTION 6-16 STANDARD OPTIONAL DN LEVA CON INDICATORE DI FLUSSO WRENCH WITH FLOW INDICATOR DN MONTAGGIO VITI SCREW ASSEMBLING -MONTAGE VIS EINBAU MIT SCHRAUBEN -MONTAGGIO VITI SCREW ASSEMBLING -MONTAGE VIS EINBAU MIT SCHRAUBEN -STELO ANTI ESPULSIONE -TIGE ANTIEXPULSION -ANTI BLOW OUT STEM -AUSBLASGESICHERTE WELLE DN BREVETTO PATENTED PACCO A V -JOINT A V ANTISTATIC DEVICE -CHEVRON RINGS -3 FACHE DACHMANSCHETE ANTISTATIK VORRICHTUNG BS LEVA DOPPIA -LEVIER DOUBLE - DUAL WRENCH DOPPELHANDHEBEL - O RING STELO O RING ON STEM -TIGE AVEC O RING - O RING IM SPINDELBEREICH
5 ISO 9001:2008 by L.R. VALVOLA A SFERA "3 VIE" PASSAGGIO TOTALE 90 BALL VALVES "3 WAY" FULL BORE 90 ROBINETS A BOISSEAU SPHERIQUE "3 VOIES" PASSAGE INTEGRAL 90 KUGELHÄHNE "3 WEGE VOLLER DURCHGANG 90 ESECUZIONI EXECUTIONS EXECUTIONS AUSFÜHRUNGEN -PROLUNGA STELO -STEM EXTENSION -TIGE PROLONGEE -SPINDELVERLÄNGERUNG -PARTICOLARI INOX -STAINLESS STEEL DETAILS -ACCESSOIRES EN INOX -EDELSTAHLTEILE -ATTACCO ISO -SYSTEM ISO - ISO CONNECTIONS -ANSCHLUSS ISO ADLER FIRE SAFE ISO ISO-FT (BS 6755 / API 607) UNA GAMMA COMPLETA PRIVILEGIANDO LA QUALITA A COMPLETE RANGE PRIVILEGING THE QUALITY -SFERA CONTENUTA CONTENTS BALL - BOULE CONTENUE -NICHT RAUSRAGENDE KUGEL VEDERE / ISO DN DOPPIA TENUTA -DOUBLE ETANCHEITE DOUBLE SEALS -DOPPELTE ABDICHTUNG GHIERA A BATTUTA -METAL BEATING RING -EMBOUT AVEC BATTUE MECANIQUE -METALLISCHER ANSCHLAG DES GEWINDEDRUCKRINGS -FORO DI SCARICO NELLA SFERA -OVERPRESSURE HOLE INTO BALL -TROU DECOMPRESSION DANS LA BOULE -ENTLASTUNGSBOHRUNG IN DER KUGEL - SERVIZIO CRIOGENICO CRYOGENIC SERVICE - SERVICE CRYOGÉNIQUE - TIEFTEMPERATUR SERVICE -FIRE SAFE ISO FT + O RING STELO -FIRE SAFE ISO FT + O RING ON STEM -SECURITE FEU ISO FT + TIGE AVEC O RING -FEUERSICHERE AUSFÜHRUNG ISO FT + O RING IM SPINDELBEREICH BREVETTO PATENTED DN DOPPIA TENUTA DOUBLE SEALS DOUBLE ETACHEITE DOPPELTE ABDICHTUNG DN UNIONE CORPO LATERALE CON VITE BODY AND END ASSEMBLING WITH SCREW
6 DIMENSIONI FLANGE UNI EN FLANGE DIMENSION UNI EN DIMENSIONS BRIDES UNI EN FLANSCHANSCHLUSSMASSEE UNI EN DN Ref PN 10 PN 16 D C K N 4 4 4* f b e D C K N 4 4 4* F b e ANSI B16.5 (OPTIONAL) DN Ref. ½ ¾ 1 1 ¼ 1 ½ 2 2 ½ RF D C K N f b e ADLER SpA BALL VALVES S. STEFANO TICINO (MI) ITALY V.le BORLETTI, 14 Tel. +39/ FAX +39/ adler@adlerspa.com
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
VALVOLE A SFERA ANSI B 16.10 PASSAGGIO VENTURI
ISO 9001:2008 by L.R. ANSI 300 NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE
VALVOLE A SFERA 3 VIE PASSAGGIO TOTALE 90
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B1.20.1 NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO TOTALE 120. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA "3 VIE CORPO PIATTO" PASSAGGIO
VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO TOTALE 90. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 VIE CORPO PIATTO PASSAGGIO
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
VALVOLE A SFERA ANSI B 16.10 SPLIT BODY PASSAGGIO TOTALE. ISO nbr LRC 0160281 QMS issued by L.R.Q.A. PED nbr COV 0212112/01 issued by L.R.V.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA ANSI B 16.10 SPLIT BODY
VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE GAS ISO 7-1 ANSI B1.20.1 NPT S.W. B.W.
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 3 PEZZI PASSAGGIO TOTALE
VALVOLE A SFERA CORPO PIATTO PASSAGGIO TOTALE
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA CORPO PIATTO PASSAGGIO
VALVOLE A SFERA 2 PEZZI PASSAGGIO TOTALE GAS ISO 7 ANSI B1.20.1 NPT
ISO 9001:2008 by L.R. NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LINK: http://www.adlerspa.com/pdf/norme_adler.pdf VALVOLE A SFERA 2
NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING:
ISO 9001:00 by L.R. PED DIR. 97/3/EC by L.R. ISO 154 by TÜV FA NORME E DIRETTIVE APPLICATE DISPONIBILI AL SEGUENTE LINK: STANDARD AND DIRECTIVE APPLIED AVAILABLE AT FOLLOWING LING: http://www.adlerspa.com/pdf/norme_adler.pdf
OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia
1 OMAL S.p.A. Headquarters: Via Ponte Nuovo 11, 25050 Rodengo Saiano Brescia Italy Production Site: Via San Lorenzo 70, 25069 Villa Carcina Brescia Italy Ph: +39 0308900145 Fax: +39 0308900423 www.omal.it
Valves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
COPRIM - ITALY VALVOLE A FARFALLA IN ACCIAIO PN16 STEEL BUTTERFLY VALVES - VANNE PAPILLON EN ACIER ISPESL 0100 PED
VAVOE A FARFAA IN ACCIAIO PN16 STEE BUTTERFY VAVES VANNE PAPION EN ACIER COPRIM ITAY CARATERISTICHE Features Caracteristiques Pressione massima Max pressure Pression max: 8 bar Temperatura Temperature
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals
VALVOLA THOR: SPLIT BODY 3 vie 4 guarnizioni THOR VALVE: SPLIT BODY 3 way 4 seals 167 FEATURES & BENEFITS Si evitano cariche elettrostatiche che potrebbero essere causa d'innesco in ambienti infiammabili
R u b i n e t t i s o t t o l a v a b o
R u b i n e t t i s o t t o l a v a b o A n g l e v a l v e s ART. 3000 / 3001 ART. 3025 / 3026 senza filtro out filter Rubinetto sottolavabo a vitone con filtro e dado (alto o basso) filter and nut (long
SKU: BV4262. Industrial PVC-U Screwed BSP Ball Valve
SKU: BV4262 PVC-U Screwed BSP Ball Valve PVC-U Geschraubt BSP Kugelventil Válvula de bola roscadas BSP PVC- U 1/2" 2" PVC-U Double Union Ball Valve 1/2 " - 2" PVC-U Doppel Union Kugelhahn 1/2" - 2 " Válvula
BALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
DOUBLE BLOCK AND BLEED VALVES
DOUBLE BLOCK AND BLEED VALVES ENGINEERING - QUALITY AND TESTING Energy Valves is specialized in designing and manufacturing DBB valves (ball - plug - gate). Technical solutions and engineering are in accordance
PN 10 - Art. A020 TIS PN 16 - Art. A021 TIS
- Art. A00 TIS - Art. A0 TIS SARACINESCA CUNEO GOMMATO / CORPO PIATTO / SHORT EN - SERIE DN G K D L H n-d b M S Peso Weight 0 0 0 0 -ø -ø 00. 0 0 -ø -ø 00. 0 -ø -ø. 0 00 0 -ø -ø. 0 0 0 0 -ø -ø. 0 00 -ø
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
ACCESSORI - ACCESSORIES ZUBEHÖRE - ACCESSOIRES - ACCESORIOS
Controflange - Counterflanges Gegenflansche - Contre-Brides - Bridas Utilizzabile per i modelli Attacco Codice Suitable for models Connection mm Code STYLE 0,5-1-2-3-4-6-8 1/2 95 0507509515/12 ACS 2 1/2
ENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS. Capitolo 6 Chapter 6
VALVOLE A SFERA, DI SCARICO OLIO, DI SICUREZZA, A SARACINESCA, RACCORDI BALL VALVES, OIL DRAIN VALVES, SAFETY VALVES, FITTINGS Capitolo 6 Chapter 6 Art. 226 Valvola a sfera con tappo Ball valve with plug
ISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
CATALOGO TECNICO TECHNICAL CATALOGUE
VALVOLE DI SICUREZZA A MEMBRANA DIAPHRAGM SAFETY RELIEF VALVES CATALOGO TECNICO TECHNICAL CATALOGUE Valvola di sicurezza a membrana, femmina/femmina Diaphragm safety relief valve, female/female threads
POMPE ROTOMEC. ELETTROPOMPE SOMMERGIBILI Submersible pumps. IMPIEGO - Application. DESCRIZIONE - Description. DATI ELETTRICI - Electric data
POMPE ROTOMEC ELETTROPOMPE SOMMERGIBILI Submersible pumps UNI EN ISO 9-8 serie 5 TR.6 H (m) GIRANTE VORTEX - Vortex impeller 96 Giri / - R.P.M. Curve secondo ISO 996 Liv: (P).... 5 5 6 7 5 5 l/sec Q m³/h
RMT RMT RMT RMT Works Area: Lifting Equipment: Machinery: Assembling:
Company Profile RMT operates in field of manufacturing steel valves of high technology for oil, gas petrochemical and power generation. RMT is located in Italy in the town of Solbiate Olona, just north
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
Spira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
QLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
BAF BALL VALVES CATALOGUE
BAF BALL VALVES CATALOGUE for best invalvement 1 BAF BALL VALVES CATALOGUE Index About BAF Valves 3 Certificates 4 BAF Companies 5 Features 6 Applications 6 BAF Floating Ball Valves 7 Part list 8 Pressure
AIR WORK CILINDRI ISO 15552- SERIE CY CYLINDERS ISO 15552- CY SERIES 1.37 CHIAVE DI CODIFICA / ORDERING CODE CY 00 1 000 0000. Attuatori / Actuators
- SEIE CY - CY SEIES I cilindri serie CY di Airwork sono realizzati rispettando la normativa ISO 15552 ed hanno alesaggi compresi tra 32 e 125 mm. Doppio effetto, ammortizzati e magnetici sono indicati
BALL VALVES SIDE ENTRY TOP ENTRY
SIDE ENTRY TOP ENTRY Quality System AST S.p.A. applies efficient and useful policies aimed at ensuring the quality of the products. The high quality level system implemented within the Company ensures
Size : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
catalogo ricambi spare parts catalogue Rev. 0 del 01.01.2009 BR / D
BR / D pag. 104 BR / P BR pag. 105 BR / H pag. 106 BR CON CURVE DI ASPIRAZIONE E MANDATA (BR AVEC COURBES D ASPIRATION ET REFOULEMENT / BR WITH SUCTION AND DELIVERY ELBOWS / BR MIT SAUGEN UND GEISTUNG
Catalogo Parti Di Ricambio Spare Parts List
Catalogo Parti Di Ricambio Spare Parts List ASSALE.M FR.M FR AXLE REF. - st EDITION: April / 0 REVISION DATE: July / 0 - CM P/N: CA AXLE.M FR REF. - Indice Index.0. Corpo assale Axle housing.0.0 Calotte
TUBO E RACCORDI MULTISTRATO UNI 10954-1
TUO E RCCORDI MULTISTRTO MIXL RCCORDI PRESSRE PER TUO MIXL CrIMP FITTINGs FOr MIXL PIPE Raccordo diritto intermedio Intermediate coupling COD. CL /pz VS0130501 RXP1 14x2 H 14x2 H 10 5,13 VS0175003 RMP1
Wafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
MP4894, MP4896 Inline Finishing Tools
Parts Manual Ersatzteil Liste PL-89 March, 00 MP89, MP89 Inline Finishing Tools MP89 x SPEED CODE = 00 RPM = 00 RPM - xx Typical Model / Typisches Modell TERMINATION NUMBER 7 = /" ARBOR 7 = /8-" VERSATILE
6720808203 (2013/06) No
Ersatzteilliste Spare parts list Liste des pièces de rechange Lista parti di ricambio 6720808203 (2013/06) No DEENFRIT KS RR2 26.06.2013 1 6720808203 26.06.2013 2 6720808203 26.06.2013 3 6720808203 Inhaltsverzeichnis
valvole 16 mm ad azionamento pneumatico pneumatically piloted valves - 16 mm
valvole 6 mm ad azionamento pneumatico - 6 mm Valvole a spola 5/ con attacchi filettati G/8 (scarichi M5) 5/ spool valves with G/8 threaded ports (M5 exhaust ports) Spessore della valvola: 6 mm Valve thickness:
Catalogo Parti Di Ricambio Spare Parts List Catalogue Pieces De Rechange Ersatzteilkatalog
Catalogo Parti Di Ricambio Spare Parts List Catalogue Pieces De Rechange Ersatzteilkatalog ASSALE.M AXLE.M ESSIEU.M ACHSE.M REF. st EDITION 0/' REVISION DATE 00 P/N: CA0 AXLE.M REF. INDEX INDICE INDEX
CRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
Baumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
FDX 2 Loncin Complessivo Macchina
Loncin Complessivo Macchina 0/50-2/70-2/200 Frame and Chassy (Assembly) 6525 03 Pump BXD 3025G 2/70 7 3605 0092 Vite Speciale Special Screw M8x45 4 6525 035 Pump BXD 3530G 2/200 8 28 0004 Rondella Washer
GD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
G-C600 AR403-GS20 Part nr. K002501
Spare Parts Catalogue Manuale Pezzi di Ricambio G-C600 AR40-GS20 Part nr. K002501 K002501 TAV. 1-14 G-C600-AR40-GS20 G-C600-AR40-GS20 G-C600-AR40-GS20 Date JUN-14 1 2 REF. PART NR. Q.TY Description ENG
VALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE PRESSURE AND VACUUM RELIEF VALVE
COSTRUZIONI MECCANICHE LUPI S.r.l. Via Cancelliera, 27-00040 -Ariccia (RM) Tel: +39-06-9343444 / Fax: +39-06-9343256 E-mail: info@lupicm.it www.lupicm.it VALVOLA DI SICUREZZA A PRESSIONE E DEPRESSIONE
DETT. B SEZ. A-A. Revision 1: Revisione particolari; revisione distinta - Parts and BOM revision
Revision : Revisione particolari; revisione distinta Parts and BOM revision A DETT. B B A SEZ. AA \\ServerHero\solid\Progetti e Lavori STAN\000 Std STAN\SE\PDM\PDM0\PDM0.000.D.dft D Drawer Disegnatore
Stainless Steel Valves For the Sanitary Industries
www.swagelok.com Stainless Steel Valves For the Sanitary Industries Sanitary ball valves Manual and pneumatically actuated butterfly valves Disk and ball check valves ir blow check valves ir relief valves
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
V&A PROCONTROL. Rotary Valve Actuators Pneumatic & Hydraulic On-Off / Control / ESD Double Acting Spring Return All Steel SIL 3
V&A PROCONTROL Rotary Valve Actuators Pneumatic & Hydraulic OnOff / Control / ESD Double Acting Spring Return All Steel SIL 3 V R VP Series Technical Information V&A Procontrol VP series pneumatic steel
DRS/A40-115-1.1M GRINDER. Q = Portata / Flow rate / Débit Modello l/min 75 120 180 225 240 270 Model m Modèle
DRS/A40-115-1.1M S.C. 07/13 DRS/A40-115-1.1M CURVE DI PRESTAZIONE PERFORMANCE CURVES COURBES DE PERFORMANCE TABELLA PRESTAZIONI PERFORMANCE TABLE TABLEAU DE PERFORMANCES Q = Portata / Flow rate / Débit
TN2000 Series Pneumatic Piston Actuators for DN125 to DN300 SPIRA-TROL Series Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Catalogo Parti Di Ricambio Spare Parts List
Catalogo Parti Di Ricambio Spare Parts List ASSALE.M AXLE.M REF. st EDITION 0/0 REVISION DATE 00/00 P/N: CA AXLE.M ref INDEX INDICE INDEX.0.0 Corpo assale Axle housing.0.0 Coppia conica Bevel gear/pinion
Multipurpose Ball Valves
www.swagelok.com Multipurpose Ball Valves 33 Series Working pressures up to 6000 psig (413 bar) High flow capacity in a compact design Available with PEEK and UHMWPE seats Variety of end connections Low
Flanged and Butt-= Weld Type
Document : PG00 Year : 09 Product Group 00 Flanged and Butt-= Weld Type (LNG and LPG) Page 09 Document : PG00 Year : 09 Product Group 00 Cryogenic Butterfly valves The Cryogenic Butterfly Valve Design
2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
Spin Monocomando lavabo/bidet
Spin Spin Spin Monocomando lavabo/bidet LAVABO ZX3201-ZX3202 BIDET ZX3331 Maniglia completa R97116 Complete handle Cartuccia completa R98103.8123 Complete cartridge Ghiera e coprighiera R98182 Lock-nut
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
SISTO-16TWA/HWA/DLU. Type Series Booklet
Diaphragm Valve SISTO-16TWA/HWA/DLU PN16 DN 15-200 Maintenance-free Flanged Ends Type Series Booklet Legal information/copyright Type Series Booklet SISTO-16TWA/HWA/DLU All rights reserved. The contents
Pneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
350G48 STD Gravity slicer Affettatrice a gravità
350G48 STD Gravity slicer Affettatrice a gravità Tab.1 - BASE-TRASMISSION-BLADE/CASSA-TRASMISSIONE-LAMA... 2 Exploded diagram Esploso (Tab.1)... 2 Part list Elenco parti (Tab.1)... 3 Tab.2 MEAT TABLE/PIATTO...
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
SURFOX 304 MIG & TIG 54-D 314 (120V) & 54-D 334 (230V) MARCH 2015 1.48-R 461 5. 48-R 462 2. 48-R 313 3. 48-K 419 4. 48-S 114 6. 48-S 128 7.
A 1.48-R 461 5. 48-R 462 2. 48-R 313 6. 48-S 128 3. 48-K 419 4. 48-S 114 7. 48-R 314 9.48-R 463 8. 48-R 136 10. 48-R 105 11. 48-R 254 12. 48-R 109 13. 48-R 321 14. 48-R 214 B 15. 48-K 420 16. 48-S 228
RPS. Sanitary sampling valves SAMPLING
Sanitary sampling valves SAMPLING CHARACTERISTICS The fully autoclavable sampling valves are designed for aseptic sampling of liquids and pharmaceutical products. Made entirely in AISI 316L, the standard
CILINDRI ISO 6432 CYLINDERS ISO 6432
AI WOK I microcilindri AIWOK sono realizzati secondo le normative europee DIN/ISO 6432 ed hanno alesaggi compresi tra 8 e 25 mm. Le testate sono fissate alla camicia mediante rullatura. Sono realizzabili
VALVOLE A SFERA - SERIE 9000 ball valves
VVO S - S 000 ball valves S 0 - VVO MN & MO - mini & micro ball valves pplicazioni - applications Materiali utilizzati - materials used ilettature - threads Pressione d esercizio - Temperatura d esercizio
1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
HTM PUMPS PP-PVDF Non-metallic mag drive centrifugal pumps
HTM S PP-PVDF Non-metallic mag drive centrifugal pumps POMPE HTM PP-PVDF Pompe centrifughe in materiale termoplastico FEATURES: Materials in contact with the liquid: Casing and impeller: PP/PVDF; O-ring:
API Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
ABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
Fisher 8580 Rotary Valve
8580 Valve Product Bulletin Fisher 8580 Rotary Valve The Fisher 8580 rotary valve offers excellent throttling and automated on-off, quarter-turn performance. An approximately linear flow characteristic
FlowPak TM General Application Valve 1/2-4, Class 150
FlowPak TM General Application Valve 1/2-4, Class 150 SCHERR Application Control of gases, vapours and liquids. The modular concept of valve, multi spring actuator and digital Positioner Type Logix 5si,
esh Isyfr I s y f r e s h
Isyfresh Isyfresh Isyfresh Monocomando lavabo/bidet LAVABO ZP2258 BIDET ZP2324 R97128 R98111 R98398 R98859 R98877 R98929 Maniglia Handle Cartuccia completa Complete cartridge Base per monocomandi Flange
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
Light, robust, versatile
Light, robust, versatile The aluminium tube union Aluminium tube unions with the SERTO principle Union nut AW 6082 blue anodised lubricated Union body AW 6082 colourless anodised unlubricated Compression
AIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
Pressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
SISTEMI SYSTEMS GENERALE GENERAL INDUSTRIALE INDUSTRIAL LISTINO PRICE LIST
0 RAL RAL IDUSTRIAL IDUSTRIAL SISTMI SYSTMS LISTIO RI LIST OLAS ATALOO IDUSTRIAL IDUSTRIAL ATALOU OLAS OOMI SA Il punto fermo che si rinnova. Il ruppo nolgas è oggi un marchio di garanzia che racchiude
CATALOGO SINTETICO - SHORT FORM CATALOGUE
CATALOGO SINTETICO - SHORT FORM CATALOGUE VALVOLE A SFERA A 2 E 3 VIE CON ATTUATORE PNEUMATICO ROTATIVO PER APPLICAZIONI CHIMICHE E ALIMENTARI corpo di acciaio inox guarnizioni di PTFE 2 AND 3 WAYS BALL
GMP - designed Maintenance-free Diaphragm valve made of forged stainless steel according to ASME BPE-2002 and investment casting
type series booklet 8646.1/13-10 GMP - designed Maintenance-free Diaphragm valve made of forged stainless steel according to ASME BPE-2002 and investment casting with Buttweld ends or clamps PN 10 size