1998 In it for the long haul: The first design patent for the famous ISO-Grips is issued, creating a new standard in vibration-dampening technology

Transcription

1 GRIPS :: 92 GRIP ACCESSORIES :: 94 CRUISE ASSISTS :: 98 CONTROL COVERS :: 99 LEVERS :: 100 MIRRORS :: In it for the long haul: The first design patent for the famous ISO-Grips is issued, creating a new standard in vibration-dampening technology

2 :: GRIPS ALL KÜRYAKYN GRIPS ARE COMFORTABLE AND STYLISH FEATURING OUR PATENTED ISOLATION DAMPENING TECHNOLOGY TO RELIEVE FATIGUE AND NUMBNESS. A VARIETY OF STYLES AND FINISHES ARE AVAILABLE TO MATCH ANY THEME ON YOUR BIKE. AND FOR AN EVEN HIGHER LEVEL OF COMFORT, ADD A KURYAKYN THROTTLE BOSS ON PAGE 94 :: GRIP STYLE KINETIC PATENT PENDING Fits: H-D Models With Dual Cable Throttle Control K6350 Fits: H-D Models With Electronic Throttle Control K6352 KINETIC GLOSS BLACK PATENT PENDING K6351 K6353 ISO U.S. PATENT D411,432 K6205 K6227 ISO WITH THROTTLE BOSS U.S. PATENT D411,432 K6212 K6228 ISO GLOSS BLACK U.S. PATENT D411,432 K6320 K6321 ISO WITH CONTOURED THROTTLE BOSS K6342 K6343 ISO - FLAME U.S. PATENT D411,432 K6260 K6269 TRANSFORMER K6291 K6293 INTERCHANGEABLE MEDALLIONS :: 092

3 :: GRIP STYLE ZOMBIE U.S. PATENT D560,463 ZOMBIE WITH THROTTLE BOSS U.S. PATENT D560,463 END CAP Fits: H-D Models With Dual Cable Throttle Control Fits: H-D Models With Electronic Throttle Control K6296 K6298 HANDLEBAR :: GRIPS K6295 K6297 WIDOW U.S. PATENT D560,463 & D576,012 K6271 K6276 END CAP WIDOW WITH THROTTLE BOSS U.S. PATENT D560,463 & D576,012 NEW K6270 K6275 HOT SELLERS PILOT BLACK.. BY KURYAKYN FEATURED BIKES K6203 K6229 AUDIO LIGHTING PILOT WITH THROTTLE BOSS ACCESSORY MOUNTS K6204 N/A GAUGES + INSTRUMENTS BRAIDED BLACK/BLACK U.S. PATENT D648,204 K6330 K6333 HANDLEBAR FOOT COVERS + TRIMS + ACCENTS BRAIDED BLACK/RED U.S. PATENT D648,204 LUGGAGE K6331 K6334 TOURING + COMFORT PERFORMANCE BRAIDED BLACK/BLUE U.S. PATENT D648,204 THE SHOP K6332 K6335 REFERENCE GUIDE INDEX BRAIDED GRIPS INCLUDE POINTED & FLAT END CAPS sales@zodiac.nl 093 ::

4 :: CRU ISE ASSISTS FOR KU RYAKYN GRIPS C K6355 A K6299 A K6299 B K6250 B K6319 C K6354 D K6252 D K6252 A K6318 A CONTOuRED ISO -THROTTLE BOSS A larger surface area & pad provides even more comfort than the original design while still easing hand & forearm fatigue. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Transformer Grips K6309 Left Side - Chrome (ea) K6299 Right Side - Chrome (ea) K6318 Right Side - Gloss Black (ea) B ISO -THROTTLE BOSS Slightly relax your grip on the gas and still maintain a constant speed. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Transformer Grips-Left or Right Grip K6319 Gloss Black (ea) K6250 Chrome (ea) K6253 Chrome (pr) D K6286 D K6274 D K6294 D K6294 C KINETIC THROTTLE BOSS Patent Pending Designed to relieve pressure from your palm allowing the driver to slightly relax their grip and maintain a constant speed. Fits: Kuryakyn Kinetic Grips, Right or Left K6354 Chrome (ea) K6355 Gloss Black (ea) D THROTTLE BOSSES FOR KURYAKYN THEME GRIPS Match the styling of our most popular grips! K6252 Pilot Throttle Boss (ea) Fits: Kuryakyn Pilot Throttle Grip Only K6274 Widow Throttle Boss (ea) Fits: Kuryakyn Widow Throttle Grip Only K6286 Zombie Throttle Boss (ea) Fits: Kuryakyn Zombie Throttle Grip Only K6294 Transformer Throttle Boss (ea) Fits: Kuryakyn ISO-Grips, ISO-Flame Grips, & Transformer Grips - Left or Right Grips :: 094

5 E K6238 E K6238 E K6339 H K6249 HANDLEBAR :: GRIP ACCESSORIES G K6215 F K6248 I K6243 I K6245 F K6247 J K6356 G K6215 E GRIP END WEIGHTS Install on the end of each grip adding mass & length to further reduce high amplitude handlebar vibration. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Braided Grips & Kinetic Grips K6238 Chrome (pr) K6338 Chrome (ea) K6339 Gloss Black (pr) Note: Kinetic Grips require Accent Rings, sold separately. F KEWLOCK GRIP END HELMET LOCK Adds both a locking helmet holder to the end of your grips as well as functions as a bar end weight to assist in stabilizing. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Braided Grips & Kinetic Grips K6247 KewLock Grip End Helmet Lock (ea) K6248 KewLock Grip End Helmet Locks (pr) Note: Kinetic Grips require Accent Rings, sold separately. G ISO -CAPS WITH LEATHER FRINGE Add a little flair to your ISO-Grips with these top grain leather fringed end caps from Iron Braid. 16 fringe complements fringed saddlebags, levers and jackets. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Braided Grips & Transformer Grips K6215 ISO-Caps with Black Leather Fringe (pr) Note: Not compatible with air reservoir bars. H STILETTO END CAPS Screws supplied for use with or without Throttle Boss. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Braided Grips & Kinetic Grips K6249 Stiletto End Caps (pr) Note: Kinetic Grips require Accent Rings, sold separately. I GRIP END CAPS Replacements for ISO-Grips or styling update for ISO-Flame, Transformer, Braided or Kinetic Grips. Includes screws. Fits: All Küryakyn ISO-Grips, ISO-Flame Grips, Braided Grips & Kinetic Grips K6243 ISO-Grip End Caps (pr) K6244 ISO-Grip End Cap (ea) K6245 Maltese Cross Grip End Caps (pr) K6336 Chrome Pointed End Caps for Braided Grips (pr) J FIv E-SPOKE END CAPS FOR KINETIC GRIPS Update the look of your Kinetic Grips with these Five-Spoke End Caps. Available in Chrome or Black & Chrome, the five-spoke design is styled to complement the design of Küryakyn s Mach 2 line of products. Fits: Kuryakyn Kinetic Grips without Throttle Boss K6356 Chrome (pr) K6357 Black & Chrome (pr) NEW HOT SELLERS BLACK.. BY KURYAKYN FEATURED BIKES AUDIO LIGHTING ACCESSORY MOUNTS GAUGES + INSTRUMENTS HANDLEBAR FOOT COVERS + TRIMS + ACCENTS LUGGAGE TOURING + COMFORT PERFORMANCE THE SHOP REFERENCE GUIDE INDEX sales@zodiac.nl 095 ::

6 A THROTTLE ROCKER II The Throttle Rocker attaches to the grip with a Velcro strap & allows you to maintain a steady cruising speed without keeping a tight grip on the throttle. Fits: Any Application with a Twist Grip Throttle A K6256 B K6315 C K6251 A K6255 C 6251 K6255 Right Throttle Rocker II (ea K6256 Left Throttle Rocker II (ea) B WIDE univ ERSAL THROTTLE BOSS (XL) Quick installation with a wrap-around system. Keep control of your throttle, with a larger palm rest for more support. Fits: Any Application with a Twist Grip Throttle K6315 Wide universal Throttle Boss (ea) C univ ERSAL THROTTLE BOSS Installs in seconds to provide a cushioned platform to rest one s palm. When not in use, it can be quickly removed without tools, and stowed in a jacket pocket or tool bag. Fits: Any Application with a Twist Grip Throttle K6251 universal Throttle Boss (ea) D CRAMPBuSTER CRuISE ASSIST Dramatically reduces wrist fatigue often caused by long rides. When downward pressure is applied the throttle is regulated effortlessly & accurately without squeezing. D K6254 :: NARROW :: WIDE D K6259 E GRIP ACCENT RINGS :: KNURLED Fits: Kuryakyn ISO-Grips, ISO-Flame Grips & Braided Grips K6222 Blue (pr) K6220 Chrome (pr) K6223 Gold (pr) K6224 Purple (pr) K6225 Green (pr) K6226 Black (pr) :: SMOOTH K Handlebars (ea) K6259 7/8 Handlebars (ea) Note: Use K6258 & K6254 on grips with 1-7/16 to1-3/4 outside diameter. Use 6259 & 6257 on grips with 1-1/8 to 1-3/8 outside diameter. Suggested use of K6258 or K6254 with all Küryakyn Grips Fits: Kuryakyn ISO-Grips, ISO-Flame Grips & Braided Grips E Knurled F REPLACEMENT GRIP EMBLEMS & COMPONENTS :: ISO, ISO-FLAME, & TRANSFORMER GRIPS K6289 Replacement Transformer Grip End Caps (pr)fits: Transformer, ISO & ISO-Flame Grips K6365 Replacement Emblem Kit for Transformer Grips (set) :: WIDOW & ZOMBIE GRIPS K Handlebars (ea) K6257 7/8 Handlebars (ea) E Smooth K6277 Replacement Widow End Cap (ea) Fits: Widow Clutch or Throttle Grip without Throttle Boss K6265 Red (pr) K6266 Blue (pr) K6363 Chrome (pr) K6364 Chrome Fits: Transformer Grips only :: OPTIONAL LONGER SCREWS K6219 Longer Stainless Screws for Accent Rings (set) Note: Add up to three accent rings with optional longer screws P/N K6219. K6281 Replacement Zombie End Caps (ea) Fits: Zombie Clutch Grip or Throttle Grip w/o Throttle Boss K6278 Replacement Zombie Emblems (pr) Fits: Zombie or Widow Grips with Throttle Boss K6279 Replacement Zombie Emblems (pr) Fits: Zombie or Widow Grips without Throttle Boss :: 096

7 G THUMBNAIL CURVE TURN SIGNAL BUTTON EXTENDERS Makes turn signal actuation simple for riders even while manipulating clutch or brake controls. Peel-&-stick installation. Fits: H-D Models (except Softails & Dynas) K6194 Chrome (pr) K6193 Black (pr) Note: Not compatible with Küryakyn Switch Housing Covers (P/N s 7809, K7827, K7828) K G K6193 I K7231 Comfortable riding all year long! J HEAT DEMON GRIP WARMERS With four settings & L.E.D. heat indicator lights you can set your ideal temperature on cold ridings days. The sleek controller mounts to the control perch and features one-button control for easy, safe heat adjustment. Kit includes everything you need for a convenient, clean install. :: KITS WITH LEFT SIDE CONTROLLER Fits: H-D Models Regardless of Handlebar Size or Throttle Type (except models with Air Reservoir Bars). K6360 Black (kit) K6361 Chrome (kit) :: KITS WITH RIGHT SIDE CONTROLLER J K6360 HANDLEBAR :: GRIP ACCESSORIES H K2027 H CHROME THROTTLE & IDLE CABLE COVERS Requires no disassembly. K2027 Fits: All Models with 90 Degree Cable Elbows (excludes electronic throttle applications) (set) Fits: H-D Models Regardless of Handlebar Size or Throttle Type (except models with Air Reservoir Bars). K6362 Black (kit) NEW HOT SELLERS BLACK.. BY KURYAKYN FEATURED BIKES AUDIO I CLUTCH CABLE FERRULE COVER & BANJO BOLT COv ER :: BANJO BOLT COVER K7230 KHandlebar Master Cylinders on Electra Glides, Road Glides, Road Kings, Street Glides & Trikes (ea) K H-D Master Cylinders & Calipers (except XL) & Softail & Dyna Master Cylinders (ea) :: CLUTCH CABLE FERRULE & BANJO BOLT COVER KIT K Electra Glides, Road Glides, Road Kings, Street Glides & Trikes (set) Note: Does not fit CVO models. K2016 All H-D Models with Stock Master Cylinder & Calipers (except v -Rod, XL, Touring & Any Models with Hydraulic Clutch) (set) :: CLUTCH CABLE FERRULE COVER K2012 All H-D Clutch Cables (ea) K ACCENTS FOR HEATED GRIPS Die-cast aluminum construction. Fits: FLHTK Electra Glide ultra Limited or any Touring Model or Trike equipped with H-D P&A Black Rubber Heated Hand grips P/N K6346 Chrome (set) K6348 Gloss Black (set) K K6346 K K6348 LIGHTING ACCESSORY MOUNTS GAUGES + INSTRUMENTS HANDLEBAR FOOT COVERS + TRIMS + ACCENTS LUGGAGE TOURING + COMFORT PERFORMANCE THE SHOP REFERENCE GUIDE INDEX sales@zodiac.nl 097 ::

8 :: CRU ISE ASSISTS A CRUISE-MATE MOTORCYCLE THROTTLE CRUISE ASSIST Lock the throttle simply by a 1/4 turn of the lever. Made from aircraft grade materials, durability is a cut above the rest. Thanks to the cleverly designed spring loaded spline, adjustments can be made on the fly. :: BLACK K6387 Fits: H-D Models (ea) K6389 Fits: H-D Models with Cable Operated Throttle (ea) K6391 Fits: H-D Models with Electronic Throttle (ea) A K6390 :: CHROME K6388 Fits: H-D Models (ea) A K6389 A K6392 A K6398 K6390 Fits: H-D Models with Cable Operated Throttle (ea) K6392 Fits: H-D Models with Electronic Throttle (ea)i :: CRUISE-MATE SERVICE PARTS K6399 Cruise-Mate Drill Bit & Tap Install Kit (ea) K6397 Cruise-Mate Handle update Kit, Black (ea) K6398 Cruise-Mate Handle update Kit, Chrome (ea) A K6399 Note: Installation requires drilling (21/64 ) and tapping (3/8-24 tap) the control housing. These tools are not included, but a Drill Bit and Tap Kit, P/N 6399, is available separately if needed. B K6285 B K6285 B MECHANICAL THROTTLE CRUISE ASSIST Simply hold the throttle at desired location & roll your little finger back to hold your throttle in position. The spring loaded tensioner makes it easy to set without over tightening for easy throttle shut down when needed. Add the left side for a bar end weight matched pair. K6285 Mechanical Throttle Cruise Assist (ea) Fits: universal models with 1" or 7/8" handlebars with hollow bar ends, and OEM or Kuryakyn ISO - & Transformer Style Grip K6288 Clutch Side Matching Bar End Weight (ea) Fits: All H-D Models with 1" or 7/8" handlebars with hollow bar ends, and OEM or Kuryakyn ISO - & Transformer Style Grips Note: Installation may require cutting or drilling a 5/8 hole in the end of the OEM grips. Handlebars must have open ends. Not compatible with Küryakyn Throttle Bosses (Chrome or Black). Does not fit with internally wired heated grips, models with electronic throttle or air reservoir handlebars. C K6280 C ELECTRO-MAGNETIC CRU ISE ASSIST Give your wrist a rest. This push button Electro-Magnetic Cruise Assist is just the ticket. Just push a button to set... push the button again, touch the brakes, or pull in the clutch (on Models) to cancel. Magnetic force holds throttle position steady, but is still easy to over-ride as necessary. Fits: Electra Glides, Road Glides, Road Kings & Street Glides, Dynas, Softails & Sportsters K6280 Electro-Magnetic Cruise Assist (ea) Note: Cannot be used on motorcycles equipped with Hydraulic clutches. Not compatible with Küryakyn Switch Housing Covers (P/N s K7809, K7827, K7828) :: 098

9 :: CONTROL COV ERS D K1741 D K9119 D K9126 D K1740 D CHROME BRAKE & CLUTCH CONTROL DRESS-UP KIT An inexpensive and easy way to finish chroming your hand controls. HANDLEBAR :: CRu ISE ASSISTS + CONTROL COv ERS K Sportsters (set) K Electra Glides, Road Glides, Road Kings, Street Glides & Trikes without Reverse (set) K Electra Glides, Road Glides, Road Kings, Street Glides & Tour Glides; Dynas & Sportsters equipped with Dual Disc Front Brakes (set) K Softails, Dynas & Sportsters equipped with Single Disc Front Brakes (set) F K7809 E K7808 NEW HOT SELLERS BLACK.. BY KURYAKYN FEATURED BIKES E K1742 AUDIO E SWITCH HOU SINGS Chrome version of the OEM switch housing. LIGHTING ACCESSORY MOUNTS K1742 K7806 Fits: Following Models WITH Cruise: FLHTC/I, FLHX/I, FLTRX, FLHT/I, FLHXXX (set) Fits: Following Models WITHOuT Cruise: FLHTC/I, FLHX/I, FLTRX, FLHT/I, FLHXXX (set) GAUGES + INSTRUMENTS HANDLEBAR K7807 Fits: FLHTCu/I, FLHTK, FLTR/I, FLTRu, FLHRC/I, FLHTCuTG (set) Note: Will also fit FLHR/I if equipped with Cruise. K7808 Fits: FLHR/I Road Kings, Softails (except 03 FXSTDSE), Dynas, Sportsters & v -Rods (set) K1747 Fits: Softail Models (except FLSTSE & FXSBSE, 14 FLSTNSE), Dyna Models & 14 Sportster Models (set) F SWITCH HOUSING COVERS A simple solution to the hassle of swapping your switch housings to chrome. K7809 Fits: XL; Dyna s, FLHR, FLHRS & Softails (except 03 FXSTDSE) (set) K7827 Fits: FLHTC, FLHX, FLTRX & FLHT models without cruise control (set) K7828 Fits: FLHTCu, FLHTK, FLTR, FLTRu & FLHRC (ea) For best appearance, motorcycle must be equipped with Küryakyn Handlebar Control Dress-Up Kits, P/N K9119 or K9126, or H-D Handlebar Reservoir Cover Sets, H-D P/N s or FOOT COVERS + TRIMS + ACCENTS LUGGAGE TOURING + COMFORT PERFORMANCE THE SHOP REFERENCE GUIDE INDEX sales@zodiac.nl 099 ::

10 :: LEV ERS A C E B D F A B C D E F LEV ERS U.S. Patents D432,470 & D596,091 Fits: Following Models with Cable Operated Clutch: '96-'07 Electra Glides, Road Glides, Road Kings, Street Glides, Tour Glides; '96-'14 Dynas, '99-'00 FXR, '96-'14 Softails & '96-'03 Sportsters (pr) Fits: Following Models with Cable Operated Clutch: '08-'13 Electra Glides, Road Glides, Street Glides, '08-'14 Road Kings & '09-'13 Trikes (pr) ZOMBIE CHROME ZOMBIE GLOSS BLACK BOSS BLADES BOSS BLADES WITH ADJUSTABLE CLUTCH TRIGGER SILHOUETTE K1047 K1090 K1038 K1080 K1029 K1049 K1058 K1091 K KK1055 Fits: '04-'13 Sportsters (pr) K1060 K K Fits: '99-'06 Twin Cams with H-D's Hydraulic Clutch and '02-'05 v -Rod (pr) K Fits: '82-'95 H-D Models (pr) K1021 K1024 SPOON STYLE TRIGGER STYLE G BRAIDED LEv ERS Iron Braid s patented braiding process ensures leather lays flat against the lever & will not loosen over time. Fits: Following Models with Cable Operated Clutch: Electra Glides, Road Glides, Road Kings, Street Glides, Tour Glides; Softails, Dynas, FXR & Sportsters :: TRIGGER-STYLE LEVERS WITH FRINGE K21543 Black & Blue (pr) :: SPOON-STYLE LEVERS WITH FRINGE K21524 Black & Black (pr) K21534 Black & Red (pr) K21544 Black & Blue (pr) K21523 Black & Black (pr) K21533 Black & Red (pr) :: TRIGGER-STYLE LEVERS WITHOUT FRINGE K21753 Black & Black (pr) :: 100

11 :: MIRRORS HANDLEBAR :: LEv ERS + MIRRORS /8 4-3/4 SKELETON HAND pg 102 ZOMBIE pg 102 TRIDENT BAR END pg /4 NEW 2-1/ /8 2-1/8 HOT SELLERS BLACK.. BY KURYAKYN SCYTHE pg 103 MAGNUM PLUS SMALL pg 104 TRIDENT pg 103 FEATURED BIKES AUDIO 5 5-1/2 2-1/2 Diameter LIGHTING 2-3/4 3 ACCESSORY MOUNTS TURN SIGNAL pg 105 MAGNUM PLUS LARGE pg 104 MALTESE CROSS pg /4 5 5 GAUGES + INSTRUMENTS HANDLEBAR FOOT 3-1/2 2-5/8 2-3/4 COVERS + TRIMS + ACCENTS BLIND SPOT TURN SIGNAL WITH FAIRING MOUNT pg 105 MAGNUM SMALL pg 104 ELLIPSE pg 103 LUGGAGE TOURING + COMFORT 5-3/4 5-1/2 PERFORMANCE 3-1/ /4 5 THE SHOP REFERENCE GUIDE BLIND SPOT TURN SIGNAL pg 104 MAGNUM LARGE pg 104 WINDSHIELD MOUNTED pg 105 INDEX sales@zodiac.nl 101 ::

12 A K1759 A SKELETON HAND MIRRORS Dims: 5" Wide x 3" Tall, E-mark compliant. Fits: Direct Replacement for H-D Applications K1758 Skeleton Hand Mirrors with Black Stems and Black Heads (pr) Seller K1759 Skeleton Hand Mirrors with Chrome Stems and Black Heads (pr) K1764 Skeleton Hand Mirrors with Black Stems and Chrome Heads (pr) A K1758 A K1764 B K1450 B ZOMBIE MIRRORS Mirror head is 3" wide x 4" tall with round glass 3" in diameter. Fits: Direct Replacement for H-D Applications K1450 Zombie Mirrors (pr) Not recommended for Buckhorn Handlebars. B K1450 B K1450 C K1425 C MALTESE CROSS MIRRORS 2-1/2 diameter. Fits: Direct Replacement for H-D Applications K1425 Maltese Cross Mirrors (pr) Not recommended for Buckhorn Handlebars. C K1425 C K1425 :: 102

13 D SCYTHE MIRRORS Dims: 6" Wide x 2-1/4" Tall Fits: Direct Replacement for H-D Applications K1448 Chrome Scythe II Mirrors (pr) K1760 Gloss Black Scythe Mirrors (pr) K1449 Chrome Scythe Mirrors (pr) Note: Not Recommended for Buckhorn Handlebars. D K1449 HANDLEBAR :: MIRRORS D K1448 D K1760 E K1437 F K1495 NEW HOT SELLERS BLACK.. BY KURYAKYN FEATURED BIKES AUDIO E ELLIPSE MIRRORS Dims: 5 wide x 2-3/4 tall. Fits: Direct Replacement for H-D Applications (except XL/XR). K1437 Ellipse Mirrors with Flat Glass (pr) K1438 Ellipse Mirrors with Convex Glass (pr) Note: Not recommended for Buckhorn Handlebars. G K6370 G K6370 F TRIDENT MIRRORS Dim: 4-3/4 wide x 2-1/8 tall (convex lens). Fits: Direct Replacement for H-D Applications K1495 Trident Mirror (ea) G TRIDENT BAR END MIRROR Just like the café racers of the 60 s, bar end mirrors are back & better than ever. These are a great way to transform the look of your bars & put the mirrors in a wider, more useful position. The offset arm & swiveling head provides great adjustability. K or 7/8 Handlebars with Hollow Bar Ends and OEM, Kuryakyn ISO or Transformer Grips (Not for Heated Grips, Air Reservoir Handlebars, or Throttle Side with Electronic Throttle) (ea) Note: Proper installation may require cutting or drilling a 5/8 hole in the end of the OEM grips. Proper installation requires 7/8 or 1 handlebars that have open ends. Not compatible with Küryakyn Chrome style throttle bosses that screw to the end of Küryakyn Grips or other grip end accessories/weights. Not suggested for Buckhorn style handlebars. LIGHTING ACCESSORY MOUNTS GAUGES + INSTRUMENTS HANDLEBAR FOOT COVERS + TRIMS + ACCENTS LUGGAGE TOURING + COMFORT PERFORMANCE THE SHOP REFERENCE GUIDE INDEX sales@zodiac.nl 103 ::

14 A K1410 A K1412 A MAGNUM PLUS MIRRORS Dims: Large Head - 5-1/2 x 3, Small Head - 5 x 2-5/8. Fits: Direct Replacement for H-D Applications (except XL/XR) :: LARGE HEAD K1409 Convex Glass (ea) K1412 Flat Glass (ea) :: SMALL HEAD K1408 Convex Glass (ea) K1410 Flat Glass (ea) Note: Not recommended for buckhorn handlebars. B K1430 B K 1428 B MAGNU M MIRRORS Dims: Large Head - 5-1/2 x 3 Small Head 5 x 2-5/8. Fits: Direct Replacement for H-D Applications (except XL/XR) K1428 Small Magnum Mirrors with Flat Glass (pr) K1430 Large Magnum Mirrors with Flat Glass (pr) Note: Not recommended for buckhorn handlebar. C K1499 C K1499 C BLIND SPOT TURN SIGNAL MIRRORS These classy mirrors have an L.E.D. Amber turn signal directed to the side to get the attention of those drivers in your blind spot. Dims: 5-3/4 wide x 3-1/2 tall. K1499 Blind Spot II Turn Signal Mirrors (pr) Fits: Direct Replacement for H-D Applications Note: Not recommended for buckhorn handlebars. D REPLACEMENT COMPONENTS FOR MAGNUM & MAGNUM PLUS MIRRORS :: CHROME MIRROR STEMS K1401 Standard Magnum Mirror Stem, Chrome, Right (ea) K1402 Standard Magnum Mirror Stem, Chrome, Left (ea) K1400 Magnum Plus Mirror Stem, Right or Left (ea) :: MIRROR HEADS ONLY K1406 Magnum Mirror Head, Small with Convex Glass (ea) K1407 Magnum Mirror Head, Large with Convex Glass (ea) K1417 Magnum Mirror Head, Small with Flat Glass (ea) K1418 Magnum Mirror Head, Large with Flat Glass (ea) E REPLACEMENT COMPONENTS FOR BLIND SPOT MIRRORS K1497 Repl. Stem, Right (ea) K1498 Repl. Stem, Left (ea) K1447 Edge Lenses for Blind Spot Mirrors (pr) K1457 Blind Spot Turn Signal Mirror Heads (pr) Fits: Küryakyn Windshield Mount (K1454) or Mirror Stems with 1/4-20 Thread Holes. F REPLACEMENT GLASS FOR TURN SIGNAL & ELLIPSE MIRRORS K1433 Flat Glass with Bezel (ea) K1436 Convex Glass with Bezel (ea) :: 104

15 G TURN SIGNAL MIRRORS Dims: 5 wide x 2-3/4 tall. Fits: Direct Replacement for H-D Applications (except XL/XR) K1431 Turn Signal Mirrors with Flat Glass (pr) K1432 Turn Signal Mirrors with Convex Glass (pr) Note: Not recommended for buckhorn handlebars. May be in violation of FMVSS #108. G K1431 HANDLEBAR :: MIRRORS H K1456 H BLIND SPOT TURN SIGNAL MIRRORS WITH INNER FAIRING MOUNTS Beautifully chromed mirror heads and mounts provide excellent rearward visibility. Amber L.E.D. s in the outer edge of the mirror function as auxiliary turn signals and plug into the stock wiring harness. Fits: Street Glides, Electra Glides & Trikes K1456 Blind Spot Turn Signal Mirrors (pr) Note: Installation on Electra Glides and Tri Glides requires drilling mounting holes. Template and all hardware included. NEW HOT SELLERS BLACK.. BY KURYAKYN FEATURED BIKES I K1452 I K1453 AUDIO LIGHTING ACCESSORY MOUNTS GAUGES + INSTRUMENTS I WINDSHIELD MOu NTED MIRRORS Clean and simple, the mount adds a classy trim to the fairing and positions the mirrors to provide excellent rearward visibility. Fits: Electra Glides, Street Glides, Trikes & Kuryakyn AirMaster Fairings :: CHROME K1403 Blind Spot Mirrors (set) K1452 Turn Signal Mirrors (set) K1453 Ellipse Mirrors (set) K1454 Mount Only - No Mirrors (ea) :: GLOSS BLACK K1761 Scythe Mirrors (set) Note: P/N K1454 accept Blind Spot Turn Signal Mirror Heads, P/N K1457, Magnum Mirror Heads, or any mirror heads with a 1/4-20 threaded studs. I K1403 I K1761 HANDLEBAR FOOT COVERS + TRIMS + ACCENTS LUGGAGE TOURING + COMFORT PERFORMANCE THE SHOP REFERENCE GUIDE INDEX sales@zodiac.nl 105 ::

16 :: STOCK MIRROR ACCESSORIES AFTER BEFORE A MIRROR STEM EXTENDERS Extend stock mirrors outward about 3 & slightly upward with these uniquely angled, chrome plated mirror stem extenders. Fasten to handlebars exactly like stock mirrors & re-use acorn nut or turn signal mounting swivel. Fits: Stock H-D Mirrors with Round Steel Stem K1444 Mirror Stem Extenders (pr) A K1444 B K1754 B 1754 B COVERS FOR STOCK MIRRORS Change the look of your stock mirrors without breaking the bank. Installs in minutes using high-strength 3M VHB. B K1753 Fits: H-D Models with Original Equipment Handlebar Mounted Mirrors (except Cv O/Screamin Eagle Models) K1753 Chrome Flame Accents for Stock H-D Mirrors (pr) B K1756 B K1755 K1754 Gloss Black Flame Accents for Stock H-D Mirrors (pr) K1755 Ace of Spades Accents for Stock H-D Mirrors (pr) K1756 Black Hole Mirror Accents for Stock H-D Mirrors (pr) Note: H-D also offers this mirror as an accessory, listed in their P&A catalog as Tapered Mirrors. C K1757 C L.E.D. MIRROR STEM COv ERS Add some auxiliary lighting to your handlebars easily with our new Lighted Mirror Stem Covers. Amber L.E.D. s provide run & turn function. Chrome plated housings clamp securely to stock mirror stems & simple plug-&-play wiring adapters make connections a snap! Fits: H-D Original Equipment Tapered, Short- Stem Mirrors K1757 L.E.D. Mirror Stem Covers (pr) C K1757 :: 106