Using The Admiralty Vector Chart Service With The L-3 Communications Valmarine NaviNet ECDIS

Size: px
Start display at page:

Download "Using The Admiralty Vector Chart Service With The L-3 Communications Valmarine NaviNet ECDIS"

Transcription

1 Using The Admiralty Vector Chart Service With The L-3 Communications Valmarine NaviNet ECDIS

2 The United Kingdom Hydrographic Office Admiralty Way, Taunton, Somerset, TA1 2DN, United Kingdom Tel: +44 (0) UKHO 2010 All Rights Reserved The copyright in this document, which contains information of a proprietary nature, is vested in UKHO. The content of this document may not be used for purposes other than that for which it has been supplied and may not be reproduced, either wholly or in part, in any way whatsoever.

3 Table of Contents Introduction...1 Conventions Used in this Document...1 Purpose of this Guide...1 Getting Started...3 New AVCS Customers...3 AVCS Start-Up Pack...3 AVCS Licence...3 AVCS Media Replacement...3 Pre-installation Checks...3 Data Cleansing...3 Public Key Is the Correct File Installed?...3 Background... 4 Check the Public Key... 4 ECDIS Authentication Warning... 4 Emergencies...4 NaviNet ECDIS Start Up and Overview...5 The Start Panel...5 Supported Chart Formats...5 ECDIS Display Layout...6 The C-Map Chart Manager (CCM)...7 Accessing the CCM...7 An Overview of the CCM...8 The CCM Dialog Box...8 The Menu Bar... 8 The CCM Main Views... 9 Database List View... 9 Collection View... 9 Chart List View... 9 Preliminary System Checks...11 General...11 System Checks...11 Check C-Map Compiler Licence Installed...11 Check the installed Certificate...11 Install New or Re-Issued Digital Certificate...12 Data Cleansing...13 Remove System ENC (SENC) Database...13 Install AVCS Licences and ENCs...15 Overview...15 Permits General Information...15 The AVCS Licence...15 AVCS Data CDs General Information...15 Installing AVCS for the first time...15 Importing the AVCS to the ECDIS...16 Installing the AVCS Permit File...17 Installing the AVCS ENCs...17 Creating a Database...18 Import S-57 Charts - Additional Information...18 Build the AVCS Database...18 Repeat AVCS Base CD Install Process January 2010

4 AVCS Updating...19 General...19 The Weekly Update CD...19 The Admiralty Updating Service...19 Installing AVCS ENC Updates...19 Finalising the AVCS (Base/Update) Installation...21 Update Chart Headers Database...21 Distribute Databases (to Remote Computers)...21 Clean Up Unnecessary Data...22 Restarting the ECDIS...22 AVCS and System Status Checks...23 View AVCS Product Listing (ECDIS)...23 AVCS Status (Remote)...23 System Import Log...25 Important Information for Users...25 System Error Log...25 Viewing AVCS ENCs...27 Overview...27 Accessing ENCs via the Chart Catalogue...27 Accessing ENCs from the C-Map Chart Manager...28 Accessing ENCs in the ECDIS Viewer...28 Changing the View Mode...28 Moving and Resizing ENC in the Viewer...29 Re-centre or Pan the ENC in the Viewer...29 Changing the ENC Viewing Scales...29 Getting Help...31 Frequently Asked Questions (FAQ)...31 Technical Support...31 Who should you contact?...31 Emergency Chart Permit Generation...31 Feedback...32 Contact Details...34 Company Contact...34 ECDIS Manufacturer...34 Chart Agent...34 UKHO January 2010

5 Introduction Conventions Used in this Document Italic font is used for:! program and component names Boldface is used for:! chapter and section headlines! important notes Courier New font is used for:! any text typed by the user! file content and names The note box displays important information which should not be ignored. Select from the Menu Bar:! Indicates the menu options to select a particular ECDIS function. Please note:! Logos incorporating the Admiralty are trademarks of the UKHO.! Screen layouts illustrated in this user guide may differ from the actual one.! The information described in this user guide is subject to change without notice.! Windows is a registered trademark of Microsoft Corporation in the United States and/or other countries. Purpose of this Guide AVCS ENCs are produced and distributed according to well-defined international standards. However each ECDIS manufacturer has implemented the ENC cell import module differently. Users who are experienced in operating a particular model of ECDIS may initially encounter difficulties when managing AVCS ENCs on ECDIS equipment that they are not as familiar with. The purpose of this guide therefore is to provide equipment-specific information to assist users in managing their AVCS ENC holdings. This guide has been produced to take users through the installation of the Admiralty Vector Chart Service on ECDIS or ECS equipment. The actual instructions and screenshots for this guide have been compiled from the L-3 Communications Valmarine NaviNet ECDIS Operation Manual, a practical demonstration and correspondence with L-3. It is based on the software version detailed on the front cover. However the method of managing AVCS and other digital data, e.g. ARCS, is generic across equipment supplied by the same manufacturer, i.e. different versions and models. There may be minor differences between certain models and these will be highlighted in this guide where known. The Admiralty Vector Chart Service User Guides are available for other ECDIS equipment; please visit to download a guide suitable for your ECDIS equipment. This guide should be read in conjunction with the AVCS User Guide, as well as the ECDIS Operators Manual or other documentation as supplied by the equipment manufacturer January 2010

6 Intentionally Blank 2 29 January 2010

7 Getting Started New AVCS Customers Your Admiralty Chart Agent will provide you with the following materials when subscribing to AVCS for the first time. AVCS Start-Up Pack! AVCS Quick Start Guide;! AVCS User Guide;! AVCS Base Discs (a set of CDs or a DVD labelled Base );! AVCS Update Disc (a CD labelled Update ) 1 ;! Admiralty Utilities installation CD;! Admiralty Digital Data Services End User Licence Agreement (EULA). AVCS Licence This may be supplied with ARCS Start-Up Pack on hard media, e.g. floppy, CD, etc. or separately by . The initial licence pack will contain the following:! A Schedule A, this is a PDF document listing the Folios and ENC Units that the user is licensed for. It also lists the Home CD where the licensed ENCs are held. This is particularly useful as it prevents unnecessary loading of those CDs that do not contain any licensed ENCs.! A set of ENC Permit files (PERMIT.TXT and ENC.PMT) for each ECDIS installation.! AVCS Certificate (a PDF document showing your vessel and licence details). For an initial installation, or a reinstallation of AVCS on a purged ECDIS you will need all of the above. If you are applying a weekly update, you will only need the latest AVCS update disc and possibly a new ENC permit file. If you want to install additional coverage on the ECDIS you will need the latest base disc(s), the latest update CD and a new set of ENC Permit files. AVCS Media Replacement Most Admiralty Chart Agents will have a stock of AVCS Start-Up packs, so Base and Update discs can be obtained from them. Usually digital files, such as ENC Permits, are sent as attachments to s and these may be stored in your system s inbox. If not, your Chart Agent will often hold copies of any permit files previously sent to you. Pre-installation Checks Data Cleansing New AVCS customers who had previously subscribed to other ENC services are strongly recommended to remove (purge) all ENC Permits and ENCs from the system before installing AVCS. There is a good reason for doing this as previously installed ENCs may become out of date if they are not licensed in AVCS. If the system is not purged redundant ENCs may remain in the system database (SENC) and be available for use, even if the previous licence has expired. However unlicensed ENCs cannot be updated and the user may be unaware of this if inadvertently navigating on one. Instructions on how to remove ENC permits and cells are described later in the Data Cleansing section. Public Key Is the Correct File Installed? The ECDIS will not install ENCs from the Admiralty Vector Chart Service unless the correct public key is installed. Under this condition the ECDIS will report an Authentication Failure. 1 Currently an AVCS Update CD will not be available if the customer joins AVCS coincidentally with a re-issue of the AVCS Base CDs. This may change in the future with the incremental issue of the AVCS bases January 2010

8 Background The ECDIS authenticates the source and integrity of encrypted ENCs from Service Providers against a preinstalled Public Key. The Public Key can be formatted in one of two ways, either as an ASCII text file (.PUB) or an X509 Certificate (.CRT). Newer ECDIS (post 2003) often come with the IHO.PUB and/or IHO.CRT preinstalled as the IHO are the Scheme Administrator (SA) for the S-63 ENC Data Protection Scheme. The UKHO is a certified subscriber to this scheme however, for historical reasons; it does not use the IHO Public Key. The Admiralty Vector Chart Service ENCs are currently authenticated against the PRIMAR Public Key. The reason for this being that many legacy ECDIS are configured to authenticate against this public key. The UKHO intends to migrate to the IHO public key in the future when it is considered safe to do so without causing any inconvenience to existing users. Check the Public Key Before installing AVCS ENCs the user must check that the correct public key is installed on the system. The method of managing and viewing these will vary between different makes or versions of ECDIS. If the PRIMAR Public Key is not present on the system then it will have to be installed before AVCS ENCs can be loaded. See the Preliminary System Checks section for the method of managing the public key on this particular ECDIS. ECDIS Authentication Warning New build ECDIS, type approved against the latest IMO ECDIS Performance Standards (Jan 2009), will report a warning when installing AVCS on these systems. The message reads as follows: SSE26 - This ENC is not authenticated by the IHO acting as the Scheme Administrator Users should acknowledge these, if prompted to do so, but should not be alarmed as the source and integrety of the ENCs are authenticated correctly against the PRIMAR Public Key. Other errors or warnings relating to the validity of the public key or certificate should be reported, see the section on Getting Help. Emergencies In certain circumstances it may be necessary for a vessel to get access to an AVCS ENC at very short notice, for instance, if having to divert from the planned route, e.g. medical emergency. See Emergency Chart Permit Generation in the Getting Help section January 2010

9 NaviNet ECDIS Start Up and Overview The Start Panel The On/Off hardware button on the front of the Multifunctional Workstation (MFW) cabinet starts the NaviNet system. Once started the screen will appear as shown below, if the MFW was shut down from this screen by using the Shutdown button. After an uncontrolled shutdown of the system, the system will start up in the view it had when it was shutdown. An uncontrolled shutdown happens when loosing power or pushing the On/Off hardware button before the "Ready to power off" message is shown. The applications shown on the MFW display above may be configured differently for a specific vessel and depend on the products installed. The four buttons at the bottom of the screen are standard. In this example, the start panel is configured to start Conning, ECDIS, Radar, Sonar and online documentation (Help). To manage the installation of the Admiralty Vector Chart Service press the ECDIS button to start the ECDIS Display. Supported Chart Formats The NaviNet ECDIS supports the following chart formats:! ARCS: Encrypted Admiralty raster charts distributed by the UKHO. To install and display ARCS charts, a NaviNet hardware key needs to be connected to each MFW The NaviNet hardware key is the same for all MFWs.! Unencrypted ENCs (S-57): Unencrypted vector charts. No hardware key is needed.! Encrypted ENCs (S-57/S-63): S-63 is the IHO standard for encrypting and securing ENCs (S-57 charts). The S-63 standard describes the method for encrypting and authenticating each ENC. The standard also defines the systems to develop permit files that are delivered to end-users enabling them 5 29 January 2010

10 to de-crypt the data and use it for navigation. To install and display AVCS data, a NaviNet hardware key needs to be connected to each MFW. The NaviNet hardware key is the same for all MFWs.! CMAP: Encrypted vector charts delivered by CMAP. To install and display CMAP charts, a CMAP hardware key needs to be connected to each MFW. Each hardware key contains a unique user permit for the specific machine. ECDIS Display Layout When starting ECDIS from the Start Panel, the following display will appear at the screen: The display layout is divided into five areas serving different functions as illustrated.! Static Information Area! Dynamic Information Area! Static Control Area! Dynamic Control Area! Chart Area All AVCS installation processes are carried out in the Static Control Area. This includes AVCS Permit, ENC and Update loading as well as Public Key/Certificate management January 2010

11 The C-Map Chart Manager (CCM) Accessing the CCM The C-MAP Chart Manager (CCM) can be started from the Multi Function Window under the Service menu or from the ECDIS using the CHART MGR button under the Charts menu in the Static Control Area. This will bring up the NaviNet Chart Manager. Pressing the C-MAP Chart Manager button will start the CCM application. The CCM contains the functionality that manages ENCs delivered through the Admiralty Vector Chart Service. Select from the Static Control Area: CHARTS CHART MGR C-Map Chart Manager The Static Control Area (below left) contains the menu options and is positioned on the left hand side of the ECDIS screen. NaviNet Chart Manager (Default Chart Manager) 7 29 January 2010

12 An Overview of the CCM The CCM consists of a graphical user interface consisting of a menu-bar, three main views as shown in the screenshot below and a number of dialogue windows. This is the GUI where all AVCS related import functions are carried out. The CCM Dialog Box The Menu Bar The Menu Bar contains the following functions and options relating to vector chart import 2. Those related to specifically to AVCS are highlighted in Red. Menu item Menu Options Description File Install C-Map Database Installs C-Map chart database Import S57 Data Read S57 source and create a chart database Exit Exits the application View Error log List errors from chart install and update procedures Licenses List all chart-licenses Refresh Refresh display Advanced Update chart headers base Force an updating and copying of databases Export USER.USR file Create a computer identification file Import SA Digital Certificate Install a new or re-issued SA certificate file Clean up Force deleting of old, unused chart databases Reinitialize e-token HWKey Removes all chart-licenses on local machine Export Inventory to file Generate an information file containing all charts installed that can be used by the CMAP nautical manager program 2 ARCS Charts are installed from the default Chart Manager (as opposed to the CCM) January 2010

13 The CCM Main Views There are three main views in the CCM dialog box as follows: Database List View This enumerates the databases installed and registered to the system. The system can utilize chart data from several databases at a time. This view lists all the active databases. This includes the ENC database that contains ECDIS approved charts issued by national authorities originally issued in S57 format and converted to CM93 Ed3 format. The ENC database is approved for official ECDIS use. Collection View This enumerates all the zones and areas of the selected database. The items are often organized in a tree structure, which is visualized in this view. Chart List View This lists all charts located under the selected zone or area displaying more details about each chart January 2010

14 Intentionally Blank January 2010

15 Preliminary System Checks General The Getting Started section identifies some Pre-Installation checks that the user should carry out before loading AVCS ENCs into the system. These checks are primarily aimed at systems which had ENCs from another service installed prior to converting to the Admiralty Vector Chart Service. However it is prudent to carry out the following checks when installing AVCS on newly delivered systems. System Checks When installing AVCS ENCs for the first time you should carry out the following checks:! A valid C-Map Compiler licence is installed! The correct Scheme Administrator (SA) Certificate file is installed Check C-Map Compiler Licence Installed Before installing AVCS for the first time it is worth checking the C-Map Compiler-License is installed. If the ECDIS has been reinstalled, it is easy to forget to re-install the compiler-license. If it is not there, the user will not be able to compile ENCs from AVCS. The user must then contact L3-Valmarine service department for assistance. To check that the Compiler Licenses are installed:! Select Menu, View and then Licenses.! A Window like the one below is shown.! The Database Software Modules should exist with the two datasets CM933CMP and V3CATMGR (ignore the expiry date) If the Compiler-Licenses are not there they can be re-installed from the ECDIS installation CD: Launch CMCLInstall.exe from the C-MAP S57Compiler folder on the ECDIS CD. Check the installed Certificate The Getting Started section refers to issues relating to the public key installed in the ECDIS. The following section outlines how these issues can be resolved in this system. In the C-Map Chart Manager select the following path: Select from the C-Map Chart Manager Menu Bar: Advanced Import SA Digital Certificate January 2010

16 The following Import SA Certificate window will be displayed: As mentioned previously the IHO.CRT file is the default certificate installed in most new build ECDIS. If the Installed certificates pane does not list a file named PRIMAR.CRT it will have to be installed (see below. Install New or Re-Issued Digital Certificate Select from the C-Map Chart Manager Menu Bar: Advanced Import SA Digital Certificate! Browse to the location of the PRIMAR.CRT certificate file 3.! Click on the Import button! The user has now accepted the UKHO as the supplier of the AVCS ENC charts. This process only has to be carried out once for a specific service provider. The next time the user receives AVCS data from the UKHO it is NOT necessary to import the certificate again. Certificates can also be deleted by right clicking the certificate in the list and then select Delete Selected Certificate. Please do not delete the IHO.CRT unless you have a new certificate from the IHO. 3 This is currently stored in the root directory of any AVCS CD January 2010

17 Data Cleansing The Getting Started section highlights the need for new AVCS customers, who had previously subscribed to other ENC services, to remove all ENC permits and cells from the system before installing AVCS. It also outlines the reasoning behind this recommendation, the following section outline the method of carrying this out on this ECDIS. In the case of the NaviNet ECDIS it is not possible to remove previously installed permits as these are managed by the system. Remove System ENC (SENC) Database One or more database(s) containing ENCs installed and compiled into the CM93Ed3 format can be removed from the Database List View as follows:! Left Click to highlight the Database to be removed! Right Click and select Remove the Database. Once the Remove the Database action has been acknowledged it cannot be recovered January 2010

18 Intentionally Blank January 2010

19 Install AVCS Licences and ENCs Overview The Valmarine NaviNet ECDIS carries out all AVCS licencing (permit installation) and AVCS Base/Update imports from the same utility in tandem. The following sections provide general information relating to AVCS licencing and AVCS data import. Permits General Information AVCS ENCs are currently distributed on CD-ROM media and are encrypted according to the International Hydrographic Organization (IHO) S-63 Data Protection Scheme. Initially the AVCS customer is provided with ALL of the latest base and update discs which contain all the ENCs in the Admiralty Vector Chart Service. However these cannot be accessed by the ECDIS unless a valid set of S-63 ENC Chart Permits are installed. Each ENC Permit is unique and is the method which gives the user selective access to particular ENCs required for an intended voyage(s). The AVCS Licence The AVCS ENC Permits are normally supplied by your Admiralty Chart Agent in a zipped file. The contents of this file will depend on your bridge configuration as AVCS allows for up to 5 licenses for use with multiple ECDIS. When extracted one or more set of permit files (PERMIT.TXT and ENC.PMT) will be copied automatically into folder(s) named MASTER, BACKUP, RESERVE1, RESERVE2 and RESERVE3 depending on the number of ECDIS configured on the bridge. The contents should be extracted to a media, e.g. floppy, that is capable of being read by the system. AVCS Data CDs General Information The AVCS Base data is currently delivered on a series of CD-ROMs 4 or a single DVD. Each Base CD contains all the ENC base cell files and associated updates for those producer nations identified on the CD label. Users are provided with all ENCs in the service but can only access those ENCs that they are licenced for. The AVCS Base CDs are periodically re-issued to free up space on the AVCS Update CD, this is currently about every 6 to 8 weeks. The AVCS Base CDs must be loaded first before any AVCS Update CD can be loaded. The AVCS Base CD label contains the date and week of issue. Users should be careful to only load an AVCS Update CD that is newer than the installed bases. Users with internet access can check the status of the latest AVCS Base CDs using the following link: Click on the Licencing and Updating tag to view the AVCS distribution and issue dates. Although ECDIS equipment and ENCs are designed to be very reliable, there is a slightly increased risk of problems occurring when ENCs are being added, removed or updated. For this reason, you must not attempt to make changes to the installed AVCS ENCs when the equipment is being used for primary navigation or if the vessel is committed to an imminent departure. Installing AVCS for the first time It is recommended that users read the Getting Started and Preliminary System Checks sections before proceeding to install ENCs from the AVCS Base CDs. New AVCS customers will be provided with an AVCS licence (permit files) and a complete set of AVCS Base CDs by their Admiralty Chart Agent. The AVCS permit file must be installed first before any AVCS ENCs can be loaded. A Schedule A should also have been supplied with the permits files. This document informs the user which Base CDs are required to install all the users licensed ENCs in the Home CD column. 4 All the latest AVCS Base CDs are available for download from the UKHO website. This can be found using the following link and following the instructions in the Digital Products Downloads box. These are contained in a series of zipped files named AVCS_WKWW_YY_BaseN, where WW is the week number, YY the year and N is number of the base January 2010

20 There are currently 9 AVCS Base CDs but this number will grow as more ENCs become available for distribution within AVCS. It is unlikely that you will need to install all of the CDs in order to load all licensed ENCs. Reference to the Schedule A can avoid the unnecessary loading of some CDs and save you time. A small sample of the information contained in the Schedule A is provided below. RFA03 English Channel Holding Expiry Date Cell Title Home CD AVCS Update GB Isles of Scilly and Western Approaches AVCS Base 3 N/A GB Land's End to Falmouth AVCS Base 3 AVCS Update GB Falmouth to Looe AVCS Base 3 N/A PACAS Asian Seas Holding Expiry Date Cell Title Home CD AVCS Update GB Tokongkemudi to Natuna Utara AVCS Base 9 N/A GB Pulau-Pulau Leman to Badas AVCS Base 9 AVCS Update GB Selat Karimata and Approaches AVCS Update N/A If the user does NOT have a copy of the Schedule A then the complete set of AVCS Base CDs must be installed to ensure that all licensed ENCs are imported to the system Importing the AVCS to the ECDIS The system is capable of importing S-57 formatted ENCs encrypted using the IHO S-63 Data Protection Scheme. Imported S-57 data is recompiled into the CM93Ed3 SENC format and stored on the system in one or more user defined databases. This menu is used for installing base and update data. It is not possible to right click on an S-63/S-57 imported database and Install updates from file. Select from the C-Map Chart Manager Menu Bar: File Import ENC from S57/S63 format January 2010

21 An Import S57 charts dialog as shown in the below will be displayed. This dialog contains all the functionality necessary to licence and import encrypted AVCS ENCs. Installing the AVCS Permit File AVCS is provided encrypted and a licence file named PERMIT.TXT is required to decrypt the AVCS ENCs purchased. Confirm that the box labelled Are you using a PERMIT file? (Encrypted ENCs) is checked (ticked) as indicated below. Failure to check this box will prevent the system from importing AVCS ENCs. Using the Browse button to select the destination drive or folder where the AVCS permits are held. The example below shows the source as the floppy drive. The only time it is necessary to install the PERMIT.TXT file again is if a new one is supplied by the UKHO. This will usually be supplied with a new AVCS Update CD or a new set of Bases. Installing the AVCS ENCs It is now necessary to Browse to the Catalogue file on the first AVCS CD. The Getting Started section identifies how users can determine which AVCS CDs are required for loading. The Catalogue file is located in a folder named ENC_ROOT which is located in the root directory of the CD. The example below shows this to be E:\ENC_ROOT January 2010

22 If only the drive letter, e.g. E:\ is selected the system will not import the AVCS ENCs and will hang. Creating a Database The user is now required to create a database (new customers) or select from a previously created one (existing customers) using the down arrow. If a keyboard is connected to the ECDIS then the user can type directly into this field to create a new database. If not select the Show keyboard button and type the name of the database from within the ECDIS. The AVCS Update CD can only be applied to an existing database. Therefore it is important to remember which database the AVCS Base CDs were imported and compiled to. Import S-57 Charts - Additional Information At the bottom of the Import S57 Charts dialog there are two further fields. The top one provides instructions to the user to perform an action, in this example Please select a permit file. The bottom field allows the user to obtain information relating non critical messages reported during the import operation. Users are strongly recommended not to check (tick) this box as it will provide numerous irrelevant warning message much of which will be meaningless to any but an expert in the S-57 format. Build the AVCS Database When all the fields in the Import S57 Charts dialog are correctly filled and the appropriate flags checked (or not) the user should click on the Build button to start the compiler and import process. The conversion might take a considerable amount of time dependant on the number of ENCs licensed and the specification and performance of the ECDIS hardware. Critical errors will be displayed as they occur. All errors will be logged to the "Error Log" available under the View menu in the C-Map Chart Manager. Repeat AVCS Base CD Install Process The user should repeat the process at 0 for all AVCS Base CDs identified as being required in the Schedule A of the AVCS licence agreement January 2010

23 AVCS Updating General The Admiralty Vector Chart Service is updated on a weekly basis and is distributed via your Admiralty Chart Agent on CD-ROM 5. The only exception to this is in a week when the AVCS Base CDs are re-issued; in these instances an AVCS Update CD will not be issued. This CD contains any new ENC Cells, ENC New Editions and ENC Updates issued since the last set of AVCS Base CDs were issued. The update is cumulative so the user only has to load the latest week number. Users can update their system using the AVCS Update CD or remotely using the Admiralty Updating Service (AUS). The Weekly Update CD Your Admiralty Chart Agent will provide you with a weekly Update CD, when it is practical to do so. This CD contains any new ENC cells, new editions of ENCs and ENC updates issued since the last set of AVCS Base CDs were issued. The update is cumulative so you only need to load the latest week number. The AVCS CDs are re-issued about every 6 to 8 weeks depending on the amount of data on the Update CD. It is important that you do not attempt to load an Update CD that is not consistent with the Base CDs. For example, you should not attempt to load an update that is older than the Base CDs held on board. When new AVCS Base CDs are issued you must install these before attempting to load the latest Update CD. Periodically you will be supplied with an updated set of AVCS ENC Permits. New permits must be installed for any ENC that has had more than one new edition. An AVCS permits file is specific to a particular week as described in the Schedule A. It is important that you do not install these unless you have the corresponding Update CD for the same week. Failure to follow this advice could render some of the installed ENC unavailable for use in the ECDIS. The only exception to this rule is if additional coverage is required in cases of emergencies or changes to a planned route. The Admiralty Updating Service The Admiralty Utilities Installation CD which comes with the AVCS Start-Up Pack contains a copy of the Admiralty Updating Service application. This application, when installed, provides the user with the capability to download updates directly, via the web or by , from a server hosted in the UKHO. For more details see the EOUS (ENC Online Update Service) Customer Service Guide on the Utilities CD. Although ECDIS equipment and ENCs are designed to be very reliable, there is a slightly increased risk of problems occurring when ENCs are being added, removed or updated. For this reason, you must not attempt to make changes to the installed AVCS ENCs when the equipment is being used for primary navigation or if the vessel is committed to an imminent departure. Installing AVCS ENC Updates The procedure for updating AVCS is similar to that of installing the AVCS Base CDs. Select from the C-Map Chart Manager Menu Bar: File Import ENC from S57/S63 format 5 The latest AVCS Update CD is available for download from the UKHO website. This can be found using the following link and following the instructions in the Digital Products Downloads box. It is in a zipped file named AVCS_WKWW_YY_UPDT, where WW is the week number and YY the year January 2010

24 The following Import S57 charts window will displayed: Sometimes (but not always) new ENC Permits are issued. These permits MUST be installed together with the AVCS CD to update the correct and appropriate database. Users, when installing the AVCS Update CD MUST select the database that the AVCS Base CDs were installed to January 2010

25 Finalising the AVCS (Base/Update) Installation Update Chart Headers Database After information has been changed by the CCM application it is necessary to update the chart headers database. This is a register of all applied charts in the ECDIS system: S-57, ARCS, C-Map, etc. It is used in several places in the system in order to display and select correct charts for display. After certain operations have been performed the system will automatically prompt you to update this database before the application closes. The operation can also be forced by selecting the following: Select from the C-Map Chart Manager Menu Bar: Advanced Update chart header base Select all computers and press the Update button. Process status will be displayed for each computer subsequently. This operation takes a moment or two, so please be patient as it is important to the behaviour of the ECDIS at a later stage. After the operation has completed a reset message will be sent to all computers. In some cases this can be experienced as a disturbance on ECDIS that are running. In some cases it will be necessary to restart ECDIS after the update process. Major updates of chart information are actually best to do with all remote ECDIS applications shut down. Distribute Databases (to Remote Computers) When all the required AVCS CDs have been imported and recompiled to the specified database the chart data can be distributed to the other remote ECDIS equipment as described below. In order to distribute a database already installed on one computer to other computers, use the "Distribute database" choice shown in the figure in chapter "Ordering chart licenses" to invoke the distribution dialogue shown in the figure below. This dialogue is also displayed after a database has been installed locally, see the chapter "Installation of a database CD locally" January 2010

26 This can also be forced by highlighting the database in the CCM and right clicking on it. An option Distribute database option is displayed in a drop down menu. Selecting this will display the following Distribute Database to Remote Computers dialog. Selecting the Distribute Database button will start the process. In the example above MFW5 is the Source Computer where the database was installed. The dialog also provides real time progress on the other remote computer operations and their status. If the converted database contains updates, the CCM will not display correct update numbers for updated datasets on remote computers when this distribution method is used. However, in the ECDIS chart display the updates are correctly displayed. Clean Up Unnecessary Data It may be useful from time to time to force the deletion of old or unused databases. The reason for this is because the hard disc can become full of redundant data, for example from databases that has been incompletely deleted or have failed installation. Older databases are automatic removed when installing a newer issue. Select from the C-Map Chart Manager Menu Bar: Advanced Clean up Restarting the ECDIS When just updating existing chart databases it is generally not necessary to restart the ECDIS, but when new charts/encs are installed, the ECDIS must be totally restarted. ENC charts and C-MAP charts are correctly reloaded, but automatic change between ARCS and ENC will not discover added/removed charts. For this reason the manufacturer recommends that the ECDIS is restarted after each install of charts. For simplicity do the restart after the final distribution of the databases January 2010

27 AVCS and System Status Checks View AVCS Product Listing (ECDIS) ENC Service Providers that support the IHO S-63 Data Protection Scheme issue a full product listing (PRODUCT.TXT) on each CD. This contains a list of all available ENCs in their service including each ENCs status, e.g. Latest edition and update number. Make sure the latest AVCS CD is loaded in the appropriate drive. The latest product listing held onboard can be viewed from the default Chart Manager as follows: Select from the Chart Manager Menu Bar: View Product List AVCS Status (Remote) ENCs that are encrypted in accordance with the IHO S-63 Data Protection Scheme contain a file named PRODUCTS.TXT. This file is held in a folder named INFO held in the root directory of the AVCS CD and contains a record of all ENCs in the Admiralty Vector Chart Service. The latest AVCS Update CD (or Base if January 2010

28 re-issued) will contain the current status of ALL AVCS ENCs with respect to edition and update number and their respective issue dates. This file can be used to independently check the current status of the system database (SENC) against the latest AVCS ENCs available. The user can obtain a copy of the latest PRODUCTS.TXT file from the following sources:! The latest AVCS Update CD prior to installation. This will identify whether it is necessary to load the latest update or not.! The Admiralty Updating Service (AUS), the latest PRODUCTS.TXT file will be downloaded with any requested ENC new editions and/or updates.! The latest PRODUCTS.TXT file can be downloaded from the UKHO website using the following link and the information provided below: ftp://ukho.gov.uk A window will be displayed prompting the user to type the following information: Username: ukhopublic Password: Public12345 Select the directory Digital Products Download file named WKNN_YY_PRODUCTS.TXT (Where NN = Week Number & YY = Year) January 2010

29 System Import Log Important Information for Users The International Hydrographic Organisation (IHO) provides definitive guidance on the validation checks that should be carried out on ENCs produced by or on behalf of Hydrographic Offices. These checks relate to the data s compliance with the various IHO S-57 publications relating to the content and structure of the ENCs. Further validation checks are defined for implementation in the ECDIS equipment and these relate to consistency in respect of importing ENCs. These are published in the IHO publication S-58 Recommended ENC Validation Checks. All ENCs supplied by HOs are validated using COTS ENC validation tools, e.g. SevenCs Analyser, dkart Inspector, etc. Furthermore the majority of ENCs are also processed through the various Regional ENC Centres (RENCs), where these validation checks are carried again to ensure consistency between producer nations. Over the years a great deal of experience has been gained validating ENCs knowing what S-58 errors and warnings are acceptable and which are not. Although S-58 draws a clear line between who is responsible for which checks many ECDIS manufacturers still implement the full suite of tests identified in S-58. This can sometimes result in unnecessary errors and warnings being presented to the user either on screen or in a log file. Users should only report instances where an ENC has failed to load; these are normally identified by the ECDIS as a fatal error or ENC failed import. In these instances the UKHO will seek to resolve this with the ENC producer. System Error Log Select from the C-Map Chart Manager Menu Bar: View Error log This action lists errors generated during the chart installation and update procedures. This list contains selected non-critical messages as well as all critical errors relating to installed ENCs January 2010

30 Intentionally Blank January 2010

31 Viewing AVCS ENCs Overview There are three methods that can be used to select and view AVCS ENCs on the ECDIS as follows:! The Chart Catalogue! The C-Map Chart Manager! The Action button (the centre button) The ENC displayed by the viewer is constrained to the area in and around the ships own position symbol. The panning and/or zooming of the ENC are also restricted so that the own-ship symbol remains inside the viewer at all times. To view ENCs away from the ships own position it is necessary to change the View Mode to either Look-Ahead or Planning. Accessing ENCs via the Chart Catalogue In the CHARTS option select COVERAGE with OUTLINES ON. The VIEW option must be set to Look-Ahead mode to select ENCs outside of the area of the Own Ship Symbol. A chart catalogue is displayed against a world vector shoreline with the limits of the ENCs depicted. Licenced ENCs can be picked from this catalogue. Select from the Static Control Area: CHARTS COVERAGE OUTLINES ON To select an ENC that is off screen and away from the Own Ship Symbol the VIEW option must be set to the Look-Ahead mode January 2010

32 A chart can be selected by placing the cursor in the upper left corner of an ENC cell limit and pressing the Select button. A yellow circle will mark the selection and an Information window is displayed with the chart data. Press the Action button and a Chart Action Menu is displayed with three options as follows:! Display Chart! Display Notes! Chart Info Selecting the Display Chart option will load the requested ENC. Accessing ENCs from the C-Map Chart Manager ENCs can be selected from the C-Map Chart Manager by simply clicking once on the ENC in the list in the Chart List View. To select an ENC that is off screen and away from the Own Ship Symbol the VIEW option must be set to the Look-Ahead mode. Accessing ENCs in the ECDIS Viewer Click the Action button and select Display Chart from the drop down menu. The VIEW option must be set to LOOK-AHEAD mode and COVERAGE set to OUTLINES ON. Changing the View Mode The View Mode can be changed in the Static Information Area on the ECDIS display toggling the information box circled in the screenshot below. The following options are available for selection. In Screen: This mode indicates that the symbol for the Ship Own Position will always remain inside the viewer. This is the default mode and is used for Route Monitoring. Look: This mode indicates that the system is set to Look-Ahead monitoring mode. ENCs can be viewed that do not include the Own Ship position. Planning: This mode indicates that the system is set to Planning Mode. ENCs can be viewed that do not include the Own Ship position. Routes can be planned and managed for an intended voyage January 2010

33 The Look-Ahead mode can also be selected from the MAIN option in the Static Control Area. The user can toggle between SHIP IN SCREEN and LOOK AHEAD using the VIEW button. Toggle the VIEW button to LOOK AHEAD (p) to view ENCs away from the Own Ship position. Moving and Resizing ENC in the Viewer Re-centre or Pan the ENC in the Viewer To re-centre or pan an ENC hold down the Select button while rolling the trackerball. Unless the system is set in Look-Ahead or Planning mode panning the chart will be restricted so that the Own Ship Symbol remains inside the display. Changing the ENC Viewing Scales The user can change the scale of the ENC using the Zoom function. This is done by holding the Close button while rolling the trackerball. Move the trackerball down to view the ENC at a larger scale. Move the trackerball to view the ENC at smaller scale. Alternatively during Route Monitoring the user can activate the (minus) and (plus) buttons to zoom the chart in or out. Each time the or button is clicked the display scale is changed by a factor of 2 in respect of the current scale. Therefore a display scale of 1:50000 becomes 1: if the button is pressed and 1:25000 if the button is pressed. The range is equal to the distance from the centre to the top of the display January 2010

34 ENCs can have a scale between 1:1000 and 1:40, and will automatically select the most suitable ENC available to match the selected range. When radar display overlay is in use, the range 0.25nm, 0.5nm, 0.75nm, 1.5nm, 3.0nm, 6.0nm, 12.0nm and 24.0nm are the only ones selectable in this range. Activating the (Reset) button returns the current selected chart to its original encoded compilation scale, i.e. not zoomed. The inherent accuracy of the electronic chart is not affected. However, the text Overscale will appear yellow in the static information area if the chart is displayed in a larger scale than the one for which it was originally compiled January 2010

35 Getting Help Many of the difficulties that could be experienced when using the Admiralty Vector Chart Service with this system can be avoided by carefully following the instructions in this guide. However, issues that are known to have caused confusion in the past are detailed below in the Frequently Answered Questions (FAQ) section. Note that the FAQs in this document may well have been superseded and the most up to date version will be found at: If you encounter problems that are not solved by referring to the FAQs, you may wish to seek technical support. Please see the section below for contact details. Frequently Asked Questions (FAQ) None at the time of writing Technical Support Who should you contact? You will receive the most effective support if you address your initial query to the correct organisation. This will usually be the manufacturer of the ECDIS equipment, or the Chart Agent you obtain your AVCS charts from, but in certain circumstances you may need to contact the UKHO. Problem Hardware problems: difficulties with the keyboard, mouse, display or main system console, failure of a floppy disk or CD drive. Software problems: difficulties with configuring or using the ECDIS system software, interfacing problems. Chart installation problems: problems with installing certificates, permits and AVCS ENCs, standard error codes displayed (see AVCS User Guide). Chart content problems: display anomalies or mismatched data displays. Problems that have not been resolved by your Admiralty Chart Agent. Contact ECDIS Manufacturer Admiralty Chart Agent UKHO Contact details are available on the last page of this guide. When reporting a chart related problem it is useful if you can provide the following details:! The AVCS licence number! The ECDIS system (and model/version) being used (especially if you have more than one system on board)! The date and week number of the latest base and update disks held on the vessel! The issue date of the latest ENC Permits held. If the problem appears to be related to the permits it is best to send a copy of the latest ENC Permits held by if this is possible.! Any error messages displayed on the ECDIS (see page 18 of the AVCS User Guide) Emergency Chart Permit Generation In certain circumstances it may be necessary for a vessel to get access to an AVCS chart at very short notice, for instance if she has to divert her route due to a medical or safety emergency. In these emergency circumstances only, individual AVCS ENC Permits can be obtained from the UKHO 24 hours a day, 365 days a year. These permits can be transmitted direct to the vessel by wherever possible, by fax, or simply by reading the characters out over the telephone or radio. Each permit consists of 64 characters January 2010

36 Contact details for the UKHO are available on the last page of this guide. Please quote your vessel name, the User Permit 6 Number of your ECDIS system and the required ENCs. Feedback We hope this User Guide assists you in using the Admiralty Vector Chart Service with this system. If you have any feedback on the content of this particular guide, or the online FAQs, please forward your comments to your Admiralty Chart Agent or directly to the UKHO. 6 The ECDIS User Permit is issued by the system manufacturer and is a 28 character alphanumeric January 2010

37 Intentionally Blank January 2010

38 Contact Details Company Contact If your company has a specific policy for obtaining support on IT and navigational systems, please enter details here, with contact details for the Support department: ECDIS Manufacturer Support Hours (Time Zone): Web: Telephone: Facsimile: Contact: Chart Agent Support Hours (Time Zone): Web: Telephone: Facsimile: Contact: UKHO Support Hours (Time Zone): Telephone: +44 (0) Facsimile: +44 (0) hrs customerservices@ukho.gov.uk Contact: UKHO Web: January 2010

Using the ADMIRALTY Vector Chart Service with PC Maritime ECDIS. This guide is based on the PC Maritime NAVMASTER ECDIS Version 7.1.0.

Using the ADMIRALTY Vector Chart Service with PC Maritime ECDIS. This guide is based on the PC Maritime NAVMASTER ECDIS Version 7.1.0. Using the ADMIRALTY Vector Chart Service with PC Maritime ECDIS This guide is based on the PC Maritime NAVMASTER ECDIS Version 7.1.0.16 User Guide V1.1 2 1 Introduction 3 2 Data Management 4 3 The User

More information

Using the ADMIRALTY Vector Chart Service with TELKO ECDIS. This guide is based on the Telko ECDIS

Using the ADMIRALTY Vector Chart Service with TELKO ECDIS. This guide is based on the Telko ECDIS Using the ADMIRALTY Vector Chart Service with TELKO ECDIS This guide is based on the Telko ECDIS Telko User Guide V1.1 2 1 Introduction 3 2 Data Management 4 3 The User Permit Number 5 4 Deleting ENC Data

More information

Version 4.0 November 2011. Admiralty e-navigator Service. Fleet Manager User Guide 1

Version 4.0 November 2011. Admiralty e-navigator Service. Fleet Manager User Guide 1 November 2011 Admiralty e-navigator Service Fleet Manager User Guide 1 Fleet Manager User Guide Table of Contents Introduction... 5 Purpose of the User Guide...5 Admiralty e-navigator Service Overview...5

More information

Version 3.0 January 2012. Admiralty e-navigator Service. Fleet Manager Shipping Company User Guide 1. Fleet Manager User Guide

Version 3.0 January 2012. Admiralty e-navigator Service. Fleet Manager Shipping Company User Guide 1. Fleet Manager User Guide January 2012 Admiralty e-navigator Service Fleet Manager Shipping Company User Guide 1 Fleet Manager User Guide Table of Contents Contents Introduction... 5 Purpose of the User Guide...5 Admiralty e-navigator

More information

StrikeRisk v6.0 IEC/EN 62305-2 Risk Management Software Getting Started

StrikeRisk v6.0 IEC/EN 62305-2 Risk Management Software Getting Started StrikeRisk v6.0 IEC/EN 62305-2 Risk Management Software Getting Started Contents StrikeRisk v6.0 Introduction 1/1 1 Installing StrikeRisk System requirements Installing StrikeRisk Installation troubleshooting

More information

Windows BitLocker Drive Encryption Step-by-Step Guide

Windows BitLocker Drive Encryption Step-by-Step Guide Windows BitLocker Drive Encryption Step-by-Step Guide Microsoft Corporation Published: September 2006 Abstract Microsoft Windows BitLocker Drive Encryption is a new hardware-enhanced feature in the Microsoft

More information

How To Restore Your Data On A Backup By Mozy (Windows) On A Pc Or Macbook Or Macintosh (Windows 2) On Your Computer Or Mac) On An Pc Or Ipad (Windows 3) On Pc Or Pc Or Micro

How To Restore Your Data On A Backup By Mozy (Windows) On A Pc Or Macbook Or Macintosh (Windows 2) On Your Computer Or Mac) On An Pc Or Ipad (Windows 3) On Pc Or Pc Or Micro Online Backup by Mozy Restore Common Questions Document Revision Date: June 29, 2012 Online Backup by Mozy Common Questions 1 How do I restore my data? There are five ways of restoring your data: 1) Performing

More information

OPTAC Fleet Viewer. Instruction Manual

OPTAC Fleet Viewer. Instruction Manual OPTAC Fleet Viewer Instruction Manual Stoneridge Limited Claverhouse Industrial Park Dundee DD4 9UB Help-line Telephone Number: 0870 887 9256 E-Mail: optac@stoneridge.com Document version 3.0 Part Number:

More information

OPTAC Fleet Viewer. Instruction Manual

OPTAC Fleet Viewer. Instruction Manual OPTAC Fleet Viewer Instruction Manual Stoneridge Limited Claverhouse Industrial Park Dundee DD4 9UB Help-line Telephone Number: 0870 887 9256 E-Mail: optac@stoneridge.com Document version 4.0 Part Number:

More information

Creating a Virtual CDFS File Server

Creating a Virtual CDFS File Server Table of Contents Table of Contents Introduction 1 Foreword... 1 Legal Notices... 2 Document Conventions... 2 What Virtual CD FS can do for you... 3 New Features in Version 9... 4 Virtual CD FS Licensing...

More information

27. SEA CHARTS EXERCISES ADMIRALTY GUIDE TO ELECTRONIC CHARTING

27. SEA CHARTS EXERCISES ADMIRALTY GUIDE TO ELECTRONIC CHARTING 27. SEA CHARTS EXERCISES ADMIRALTY GUIDE TO ELECTRONIC CHARTING 1. Supply the correct multi-word term from those in the brackets: (Electronic Navigational Charts, marine survey data, route planning, positioning

More information

NDA-30141 ISSUE 1 STOCK # 200893. CallCenterWorX-Enterprise IMX MAT Quick Reference Guide MAY, 2000. NEC America, Inc.

NDA-30141 ISSUE 1 STOCK # 200893. CallCenterWorX-Enterprise IMX MAT Quick Reference Guide MAY, 2000. NEC America, Inc. NDA-30141 ISSUE 1 STOCK # 200893 CallCenterWorX-Enterprise IMX MAT Quick Reference Guide MAY, 2000 NEC America, Inc. LIABILITY DISCLAIMER NEC America, Inc. reserves the right to change the specifications,

More information

DataPA OpenAnalytics End User Training

DataPA OpenAnalytics End User Training DataPA OpenAnalytics End User Training DataPA End User Training Lesson 1 Course Overview DataPA Chapter 1 Course Overview Introduction This course covers the skills required to use DataPA OpenAnalytics

More information

SafeGuard Enterprise upgrade guide. Product version: 7

SafeGuard Enterprise upgrade guide. Product version: 7 SafeGuard Enterprise upgrade guide Product version: 7 Document date: December 2014 Contents 1 About this guide...3 2 Check the system requirements...4 3 Download installers...5 4 About upgrading...6 4.1

More information

vtcommander Installing and Starting vtcommander

vtcommander Installing and Starting vtcommander vtcommander vtcommander provides a local graphical user interface (GUI) to manage Hyper-V R2 server. It supports Hyper-V technology on full and core installations of Windows Server 2008 R2 as well as on

More information

Personal Call Manager User Guide. BCM Business Communications Manager

Personal Call Manager User Guide. BCM Business Communications Manager Personal Call Manager User Guide BCM Business Communications Manager Document Status: Standard Document Version: 04.01 Document Number: NN40010-104 Date: August 2008 Copyright Nortel Networks 2005 2008

More information

safend a w a v e s y s t e m s c o m p a n y

safend a w a v e s y s t e m s c o m p a n y safend a w a v e s y s t e m s c o m p a n y SAFEND Data Protection Suite Installation Guide Version 3.4.5 Important Notice This guide is delivered subject to the following conditions and restrictions:

More information

Bitrix Site Manager ASP.NET. Installation Guide

Bitrix Site Manager ASP.NET. Installation Guide Bitrix Site Manager ASP.NET Installation Guide Contents Introduction... 4 Chapter 1. Checking for IIS Installation... 5 Chapter 2. Using An Archive File to Install Bitrix Site Manager ASP.NET... 7 Preliminary

More information

Net Protector Admin Console

Net Protector Admin Console Net Protector Admin Console USER MANUAL www.indiaantivirus.com -1. Introduction Admin Console is a Centralized Anti-Virus Control and Management. It helps the administrators of small and large office networks

More information

Network Probe User Guide

Network Probe User Guide Network Probe User Guide Network Probe User Guide Table of Contents 1. Introduction...1 2. Installation...2 Windows installation...2 Linux installation...3 Mac installation...4 License key...5 Deployment...5

More information

ADP V14. FAQs. Version 1.0

ADP V14. FAQs. Version 1.0 ADP V14 FAQs Version 1.0 ADP V14 FAQs What is ADP? Can I install ADP on a networked PC? ADP is a digital version of the paper Nautical Publications and consists of three product groups: Admiralty Digital

More information

RecoveryVault Express Client User Manual

RecoveryVault Express Client User Manual For Linux distributions Software version 4.1.7 Version 2.0 Disclaimer This document is compiled with the greatest possible care. However, errors might have been introduced caused by human mistakes or by

More information

WebSpy Vantage Ultimate 2.2 Web Module Administrators Guide

WebSpy Vantage Ultimate 2.2 Web Module Administrators Guide WebSpy Vantage Ultimate 2.2 Web Module Administrators Guide This document is intended to help you get started using WebSpy Vantage Ultimate and the Web Module. For more detailed information, please see

More information

Installing Windows XP Professional

Installing Windows XP Professional CHAPTER 3 Installing Windows XP Professional After completing this chapter, you will be able to: Plan for an installation of Windows XP Professional. Use a CD to perform an attended installation of Windows

More information

Installation Guide for Crossroads Software s Traffic Collision Database

Installation Guide for Crossroads Software s Traffic Collision Database Installation Guide for Crossroads Software s Traffic Collision Database This guide will take you through the process of installing the Traffic Collision Database on a workstation and a network. Crossroads

More information

FrontDesk Installation And Configuration

FrontDesk Installation And Configuration Chapter 2 FrontDesk Installation And Configuration FrontDesk v4.1.25 FrontDesk Software Install Online Software Activation Installing State Related Databases Setting up a Workstation Internet Transfer

More information

Entrust Certificate Services for Adobe CDS

Entrust Certificate Services for Adobe CDS Entrust Certificate Services Entrust Certificate Services for Adobe CDS Getting Started Guide Entrust SafeNet Authentication Client: 8.3 Date of issue: July 2015 Document issue: 3.0 Revisions Issue and

More information

Short Manual Intellect v.4.7.6 SP2 module Unipos Contents:

Short Manual Intellect v.4.7.6 SP2 module Unipos Contents: Short Manual Intellect v.4.7.6 SP2 module Unipos Contents: 1. Software Installation... 2 2. Hardware Configuration... 12 3. System Dispatching... 14 3.1. Create dispatching objects... 14 3.2. Graphical

More information

Sharp Remote Device Manager (SRDM) Server Software Setup Guide

Sharp Remote Device Manager (SRDM) Server Software Setup Guide Sharp Remote Device Manager (SRDM) Server Software Setup Guide This Guide explains how to install the software which is required in order to use Sharp Remote Device Manager (SRDM). SRDM is a web-based

More information

Getting Started Guide

Getting Started Guide Getting Started Guide Mulberry IMAP Internet Mail Client Versions 3.0 & 3.1 Cyrusoft International, Inc. Suite 780 The Design Center 5001 Baum Blvd. Pittsburgh PA 15213 USA Tel: +1 412 605 0499 Fax: +1

More information

Installation Guide for Microsoft SQL Server 2008 R2 Express. October 2011 (GUIDE 1)

Installation Guide for Microsoft SQL Server 2008 R2 Express. October 2011 (GUIDE 1) Installation Guide for Microsoft SQL Server 2008 R2 Express October 2011 (GUIDE 1) Copyright 2011 Lucid Innovations Limited. All Rights Reserved This guide only covers the installation and configuration

More information

Online Backup Linux Client User Manual

Online Backup Linux Client User Manual Online Backup Linux Client User Manual Software version 4.0.x For Linux distributions August 2011 Version 1.0 Disclaimer This document is compiled with the greatest possible care. However, errors might

More information

Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice.

Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Trend Micro Incorporated reserves the right to make changes to this document and to the products described herein without notice. Before installing and using the software, please review the readme files,

More information

Online Backup Client User Manual

Online Backup Client User Manual For Linux distributions Software version 4.1.7 Version 2.0 Disclaimer This document is compiled with the greatest possible care. However, errors might have been introduced caused by human mistakes or by

More information

System 800xA Tools. System Version 5.1. Power and productivity for a better world TM

System 800xA Tools. System Version 5.1. Power and productivity for a better world TM System 800xA Tools System Version 5.1 Power and productivity for a better world TM System 800xA Tools System Version 5.1 NOTICE This document contains information about one or more ABB products and may

More information

GlobalSign Enterprise PKI Support. GlobalSign Enterprise Solution EPKI Administrator Guide v2.4

GlobalSign Enterprise PKI Support. GlobalSign Enterprise Solution EPKI Administrator Guide v2.4 GlobalSignEnterprisePKISupport GlobalSignEnterpriseSolutionEPKIAdministratorGuidev2.4 1 TABLE OF CONTENTS GETTING STARTED... 3 ESTABLISHING EPKI SERVICE... 3 EPKI ADMINISTRATOR/USER CERTIFICATE... 4 ESTABLISHING

More information

2015 Securexam User Guide

2015 Securexam User Guide 2015 Securexam User Guide Chartered Professional Accountants of Canada, CPA Canada, CPA are trademarks and/or certification marks of the Chartered Professional Accountants of Canada. 2015, Chartered Professional

More information

Lenovo Online Data Backup User Guide Version 1.8.14

Lenovo Online Data Backup User Guide Version 1.8.14 Lenovo Online Data Backup User Guide Version 1.8.14 Contents Chapter 1: Installing Lenovo Online Data Backup...5 Downloading the Lenovo Online Data Backup Client...5 Installing the Lenovo Online Data

More information

National Fire Incident Reporting System (NFIRS 5.0) NFIRS Data Entry/Validation Tool Users Guide

National Fire Incident Reporting System (NFIRS 5.0) NFIRS Data Entry/Validation Tool Users Guide National Fire Incident Reporting System (NFIRS 5.0) NFIRS Data Entry/Validation Tool Users Guide NFIRS 5.0 Software Version 5.3 Prepared for: Directorate of Preparedness and Response (FEMA) Prepared by:

More information

Virtual CD v10. Network Management Server Manual. H+H Software GmbH

Virtual CD v10. Network Management Server Manual. H+H Software GmbH Virtual CD v10 Network Management Server Manual H+H Software GmbH Table of Contents Table of Contents Introduction 1 Legal Notices... 2 What Virtual CD NMS can do for you... 3 New Features in Virtual

More information

InfoView User s Guide. BusinessObjects Enterprise XI Release 2

InfoView User s Guide. BusinessObjects Enterprise XI Release 2 BusinessObjects Enterprise XI Release 2 InfoView User s Guide BusinessObjects Enterprise XI Release 2 Patents Trademarks Copyright Third-party contributors Business Objects owns the following U.S. patents,

More information

Upgrading to Document Manager 2.7

Upgrading to Document Manager 2.7 Upgrading to Document Manager 2.7 22 July 2013 Trademarks Document Manager and Document Manager Administration are trademarks of Document Logistix Ltd. TokOpen, TokAdmin, TokImport and TokExRef are registered

More information

Operating System Installation Guide

Operating System Installation Guide Operating System Installation Guide This guide provides instructions on the following: Installing the Windows Server 2008 operating systems on page 1 Installing the Windows Small Business Server 2011 operating

More information

Copyright 2011 DataNet Quality Systems. All rights reserved. Printed in U.S.A. WinSPC is a registered trademarks of DataNet Quality Systems.

Copyright 2011 DataNet Quality Systems. All rights reserved. Printed in U.S.A. WinSPC is a registered trademarks of DataNet Quality Systems. Copyright 2011 DataNet Quality Systems. All rights reserved. Printed in U.S.A. WinSPC is a registered trademarks of DataNet Quality Systems. All other trademarks or registered trademarks are the property

More information

Power Monitoring Expert 7.2

Power Monitoring Expert 7.2 Power Monitoring Expert 7.2 PDF version of the Web Applications online help 7ENxx-00xx-00 07/2013 PDF version of the Web Applications online help Safety information Safety information Important information

More information

Sophos Disk Encryption License migration guide. Product version: 5.61 Document date: June 2012

Sophos Disk Encryption License migration guide. Product version: 5.61 Document date: June 2012 Sophos Disk Encryption License migration guide Product version: 5.61 Document date: June 2012 Contents 1 About this guide...3 2 Add encryption to an existing Sophos security solution...5 3 SDE/SGE 4.x

More information

1. Product Information

1. Product Information ORIXCLOUD BACKUP CLIENT USER MANUAL LINUX 1. Product Information Product: Orixcloud Backup Client for Linux Version: 4.1.7 1.1 System Requirements Linux (RedHat, SuSE, Debian and Debian based systems such

More information

Sharperlight 3.0 Sample Dashboard

Sharperlight 3.0 Sample Dashboard Sharperlight 3.0 Sample Dashboard www.sharperlight.com info@sharperlight.com Sharperlight 3.0 Sample Dashboard Published by philight Software International Pty Ltd All other copyrights and trademarks are

More information

Online Backup Client User Manual Linux

Online Backup Client User Manual Linux Online Backup Client User Manual Linux 1. Product Information Product: Online Backup Client for Linux Version: 4.1.7 1.1 System Requirements Operating System Linux (RedHat, SuSE, Debian and Debian based

More information

NovaBACKUP Storage Server User Manual NovaStor / April 2013

NovaBACKUP Storage Server User Manual NovaStor / April 2013 NovaBACKUP Storage Server User Manual NovaStor / April 2013 2013 NovaStor, all rights reserved. All trademarks are the property of their respective owners. Features and specifications are subject to change

More information

Centran Version 4 Getting Started Guide KABA MAS. Table Of Contents

Centran Version 4 Getting Started Guide KABA MAS. Table Of Contents Page 1 Centran Version 4 Getting Started Guide KABA MAS Kaba Mas Welcome Kaba Mas, part of the world-wide Kaba group, is the world's leading manufacturer and supplier of high security, electronic safe

More information

Using SSH Secure Shell Client for FTP

Using SSH Secure Shell Client for FTP Using SSH Secure Shell Client for FTP The SSH Secure Shell for Workstations Windows client application features this secure file transfer protocol that s easy to use. Access the SSH Secure FTP by double-clicking

More information

Kaspersky Security Center Web-Console

Kaspersky Security Center Web-Console Kaspersky Security Center Web-Console User Guide CONTENTS ABOUT THIS GUIDE... 5 In this document... 5 Document conventions... 7 KASPERSKY SECURITY CENTER WEB-CONSOLE... 8 SOFTWARE REQUIREMENTS... 10 APPLICATION

More information

User Manual for Web. Help Desk Authority 9.0

User Manual for Web. Help Desk Authority 9.0 User Manual for Web Help Desk Authority 9.0 2011ScriptLogic Corporation ALL RIGHTS RESERVED. ScriptLogic, the ScriptLogic logo and Point,Click,Done! are trademarks and registered trademarks of ScriptLogic

More information

POLICY PATROL MFT. Manual

POLICY PATROL MFT. Manual POLICY PATROL MFT Manual MANUAL Policy Patrol MFT This manual, and the software described in this manual, are copyrighted. No part of this manual or the described software may be copied, reproduced, translated

More information

Sophos Anti-Virus for NetApp Storage Systems startup guide

Sophos Anti-Virus for NetApp Storage Systems startup guide Sophos Anti-Virus for NetApp Storage Systems startup guide Runs on Windows 2000 and later Product version: 1 Document date: April 2012 Contents 1 About this guide...3 2 About Sophos Anti-Virus for NetApp

More information

SafeGuard Enterprise upgrade guide. Product version: 6.1

SafeGuard Enterprise upgrade guide. Product version: 6.1 SafeGuard Enterprise upgrade guide Product version: 6.1 Document date: February 2014 Contents 1 About this guide...3 2 Check the system requirements...4 3 Download installers...5 4 About upgrading...6

More information

Online Backup Client User Manual

Online Backup Client User Manual Online Backup Client User Manual Software version 3.21 For Linux distributions January 2011 Version 2.0 Disclaimer This document is compiled with the greatest possible care. However, errors might have

More information

Installation Instructions Release Version 15.0 January 30 th, 2011

Installation Instructions Release Version 15.0 January 30 th, 2011 Release Version 15.0 January 30 th, 2011 ARGUS Software: ARGUS Valuation - DCF The contents of this document are considered proprietary by ARGUS Software, the information enclosed and any portion thereof

More information

iw Document Manager Cabinet Converter User s Guide

iw Document Manager Cabinet Converter User s Guide iw Document Manager Cabinet Converter User s Guide Contents Contents.................................................................... 1 Abbreviations Used in This Guide................................................

More information

System Administration Training Guide. S100 Installation and Site Management

System Administration Training Guide. S100 Installation and Site Management System Administration Training Guide S100 Installation and Site Management Table of contents System Requirements for Acumatica ERP 4.2... 5 Learning Objects:... 5 Web Browser... 5 Server Software... 5

More information

Diamond II v2.3 Service Pack 4 Installation Manual

Diamond II v2.3 Service Pack 4 Installation Manual Diamond II v2.3 Service Pack 4 Installation Manual P/N 460987001B ISS 26APR11 Copyright Disclaimer Trademarks and patents Intended use Software license agreement FCC compliance Certification and compliance

More information

How To Set Up Total Recall Web On A Microsoft Memorybook 2.5.2.2 (For A Microtron)

How To Set Up Total Recall Web On A Microsoft Memorybook 2.5.2.2 (For A Microtron) Total Recall Web Web Module Manual and Customer Quick Reference Guides COPYRIGHT NOTICE Copyright 1994-2009 by DHS Associates, Inc. All Rights Reserved. All TOTAL RECALL, TOTAL RECALL SQL, TOTAL RECALL

More information

KeyAdvantage System DMS Integration. Software User Manual

KeyAdvantage System DMS Integration. Software User Manual KeyAdvantage System DMS Integration Software User Manual ii Copyright Disclaimer Trademarks and patents Intended use EMC Directive Regulatory 2013 United Technologies Corporation. All rights reserved.

More information

File Management and File Storage

File Management and File Storage File Management and File Storage http://training.usask.ca Information Technology Services Division Table of Contents File Management at the University of Saskatchewan...3 Introduction...3 Creating Files

More information

Manual POLICY PATROL SECURE FILE TRANSFER

Manual POLICY PATROL SECURE FILE TRANSFER Manual POLICY PATROL SECURE FILE TRANSFER MANUAL Policy Patrol Secure File Transfer This manual, and the software described in this manual, are copyrighted. No part of this manual or the described software

More information

Figure 1: Restore Tab

Figure 1: Restore Tab Apptix Online Backup by Mozy Restore How do I restore my data? There are five ways of restoring your data: 1) Performing a Restore Using the Restore Tab You can restore files from the Apptix Online Backup

More information

FaxFinder Fax Servers

FaxFinder Fax Servers FaxFinder Fax Servers Models: FF130 FF230 FF430 FF830 Client User Guide FaxFinder Client User Guide Fax Client Software for FaxFinder Series PN S000460B, Version B Copyright This publication may not be

More information

Ocster Backup - Rescue System

Ocster Backup - Rescue System Overview Ocster Backup - Rescue System The software allows you to create a rescue CD, DVD or USB-Stick. This rescue system is intended for two kinds of situations: 1. To restore a backup to your main hard

More information

Zoom Plug-ins for Adobe

Zoom Plug-ins for Adobe = Zoom Plug-ins for Adobe User Guide Copyright 2010 Evolphin Software. All rights reserved. Table of Contents Table of Contents Chapter 1 Preface... 4 1.1 Document Revision... 4 1.2 Audience... 4 1.3 Pre-requisite...

More information

Exchange Granular Restore User Guide

Exchange Granular Restore User Guide User Guide Contents 1. overview... 2 2. Backup considerations... 3 Exchange VM Detection... 3 VSS Application backups... 3 Restore vs. Recovery... 3 Backup user identity... 3 3. Creating an Exchange backup...

More information

NTI Backup Now EZ v2 User s Guide

NTI Backup Now EZ v2 User s Guide NTI Backup Now EZ v2 User s Guide GMAA00423010 11/12 2 Copyright statement This guide is copyrighted by Toshiba Corporation with all rights reserved. Under the copyright laws, this guide cannot be reproduced

More information

Sage 100 ERP. Installation and System Administrator s Guide

Sage 100 ERP. Installation and System Administrator s Guide Sage 100 ERP Installation and System Administrator s Guide This is a publication of Sage Software, Inc. Version 2014 Copyright 2013 Sage Software, Inc. All rights reserved. Sage, the Sage logos, and the

More information

5nine Hyper-V Commander

5nine Hyper-V Commander 5nine Hyper-V Commander 5nine Hyper-V Commander provides a local graphical user interface (GUI), and a Framework to manage Hyper-V R2 server and various functions such as Backup/DR, HA and P2V/V2V. It

More information

OnDemand Version 1.7. Installation Manual and User s Guide. AST Technology. Sophienstrasse 4 32051 Herford Germany

OnDemand Version 1.7. Installation Manual and User s Guide. AST Technology. Sophienstrasse 4 32051 Herford Germany OnDemand Version 1.7 Installation Manual and User s Guide AST Technology Sophienstrasse 4 32051 Herford Germany Contents Overview of OnDemand Software... 1 System and Software Requirements... 1 CVe Monitor

More information

MGC WebCommander Web Server Manager

MGC WebCommander Web Server Manager MGC WebCommander Web Server Manager Installation and Configuration Guide Version 8.0 Copyright 2006 Polycom, Inc. All Rights Reserved Catalog No. DOC2138B Version 8.0 Proprietary and Confidential The information

More information

Talend Open Studio for MDM. Getting Started Guide 6.0.0

Talend Open Studio for MDM. Getting Started Guide 6.0.0 Talend Open Studio for MDM Getting Started Guide 6.0.0 Talend Open Studio for MDM Adapted for v6.0.0. Supersedes previous releases. Publication date: July 2, 2015 Copyleft This documentation is provided

More information

AVCS Folio for - ADMIRALTY Chart Agent PAYS Services

AVCS Folio for - ADMIRALTY Chart Agent PAYS Services AVCS Folio for - ADMIRALTY Chart Agent PAYS Services Version 1.1 AVCS User Folio Guide for ADMIRALTY V1.0 Chart Agent PAYS Services - Guide V1.1 2 Quick Start Guide 1 Contents 2 1. What is the Folio? 3

More information

NetBak Replicator 4.0 User Manual Version 1.0

NetBak Replicator 4.0 User Manual Version 1.0 NetBak Replicator 4.0 User Manual Version 1.0 Copyright 2012. QNAP Systems, Inc. All Rights Reserved. 1 NetBak Replicator 1. Notice... 3 2. Install NetBak Replicator Software... 4 2.1 System Requirements...

More information

Inventory Tracking Software Operations Manual

Inventory Tracking Software Operations Manual Version 4.1 Inventory Tracking Software Operations Manual Shipping Address: 7201 N. 98th St., Lincoln, NE 68507 Mailing Address: P.O. Box 29709, Lincoln, NE 68529 Toll Free: 800-278-4241 System Requirements

More information

Jetico Central Manager. Administrator Guide

Jetico Central Manager. Administrator Guide Jetico Central Manager Administrator Guide Introduction Deployment, updating and control of client software can be a time consuming and expensive task for companies and organizations because of the number

More information

VERITAS Backup Exec TM 10.0 for Windows Servers

VERITAS Backup Exec TM 10.0 for Windows Servers VERITAS Backup Exec TM 10.0 for Windows Servers Quick Installation Guide N134418 July 2004 Disclaimer The information contained in this publication is subject to change without notice. VERITAS Software

More information

Including Accounts Receivable, Budget Planning and Equipment Register. Revision History... 2. New and Updated Functionality in FMS 6.146...

Including Accounts Receivable, Budget Planning and Equipment Register. Revision History... 2. New and Updated Functionality in FMS 6.146... FMS 6.146 Including Accounts Receivable, Budget Planning and Equipment Register Contents Revision History... 2 New and Updated Functionality in FMS 6.146... 2 Enhancements in FMS 6.146... 2 Resizing of

More information

ATX Document Manager. User Guide

ATX Document Manager. User Guide ATX Document Manager User Guide ATX DOCUMENT MANAGER User Guide 2010 CCH Small Firm Services. All rights reserved. 6 Mathis Drive NW Rome, GA 30165 No part of this manuscript may be copied, photocopied,

More information

NovaBACKUP. Storage Server. NovaStor / May 2011

NovaBACKUP. Storage Server. NovaStor / May 2011 NovaBACKUP Storage Server NovaStor / May 2011 2011 NovaStor, all rights reserved. All trademarks are the property of their respective owners. Features and specifications are subject to change without notice.

More information

Institution/Department Administrator Manual

Institution/Department Administrator Manual ETS Major Field Tests Institution/Department Administrator Manual Updated: December 2010 Table of Contents 1.0 WELCOME... 1 1.1 INTRODUCTION... 1 1.2 COMPUTER HARDWARE AND SOFTWARE REQUIREMENTS... 1 2.0

More information

Juris Installation / Upgrade Guide

Juris Installation / Upgrade Guide Juris Installation / Upgrade Guide Version 2.7 2015 LexisNexis. All rights reserved. Copyright and Trademark LexisNexis, Lexis, and the Knowledge Burst logo are registered trademarks of Reed Elsevier Properties

More information

Novell ZENworks Asset Management 7.5

Novell ZENworks Asset Management 7.5 Novell ZENworks Asset Management 7.5 w w w. n o v e l l. c o m October 2006 USING THE WEB CONSOLE Table Of Contents Getting Started with ZENworks Asset Management Web Console... 1 How to Get Started...

More information

Legal Notes. Regarding Trademarks. Model supported by the KX printer driver. 2010 KYOCERA MITA Corporation

Legal Notes. Regarding Trademarks. Model supported by the KX printer driver. 2010 KYOCERA MITA Corporation Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change for improvement without notice. We cannot be held liable for any problems

More information

BackupAssist v6 quickstart guide

BackupAssist v6 quickstart guide Using the new features in BackupAssist v6... 2 VSS application backup (Exchange, SQL, SharePoint)... 2 Backing up VSS applications... 2 Restoring VSS applications... 3 System State backup and restore...

More information

StruxureWare Power Monitoring 7.0.1

StruxureWare Power Monitoring 7.0.1 StruxureWare Power Monitoring 7.0.1 Installation Guide 7EN02-0308-01 07/2012 Contents Safety information 5 Introduction 7 Summary of topics in this guide 7 Supported operating systems and SQL Server editions

More information

PROMISE ARRAY MANAGEMENT (PAM) for

PROMISE ARRAY MANAGEMENT (PAM) for PROMISE ARRAY MANAGEMENT (PAM) for FastTrak SX4030, SX4060 and S150 SX4-M User Manual Version 1.1 PAM for FastTrak SX4030, SX4060 and S150 SX4-M User Manual Copyright 2004 Promise Technology, Inc. All

More information

Exchange Granular Restore Instructional User Guide

Exchange Granular Restore Instructional User Guide Exchange Granular Restore Instructional User Guide www.backup-assist.ca Contents 1. Exchange Granular Restore overview... 2 2. Creating an Exchange backup... 3 3. Exchange Granular Restore... 6 Step 1

More information

Forms Printer User Guide

Forms Printer User Guide Forms Printer User Guide Version 10.51 for Dynamics GP 10 Forms Printer Build Version: 10.51.102 System Requirements Microsoft Dynamics GP 10 SP2 or greater Microsoft SQL Server 2005 or Higher Reporting

More information

Team Foundation Server 2012 Installation Guide

Team Foundation Server 2012 Installation Guide Team Foundation Server 2012 Installation Guide Page 1 of 143 Team Foundation Server 2012 Installation Guide Benjamin Day benday@benday.com v1.0.0 November 15, 2012 Team Foundation Server 2012 Installation

More information

Utilities. 2003... ComCash

Utilities. 2003... ComCash Utilities ComCash Utilities All rights reserved. No parts of this work may be reproduced in any form or by any means - graphic, electronic, or mechanical, including photocopying, recording, taping, or

More information

HP MediaSmart Server Software Upgrade from v.1 to v.3

HP MediaSmart Server Software Upgrade from v.1 to v.3 HP MediaSmart Server Software Upgrade from v.1 to v.3 Table of Contents Upgrade Your Server Software to HP MediaSmart Server v.3 2 Before You Begin 3 What's New... 3 Features That Will Change... 4 Prepare

More information

Hosting Users Guide 2011

Hosting Users Guide 2011 Hosting Users Guide 2011 eofficemgr technology support for small business Celebrating a decade of providing innovative cloud computing services to small business. Table of Contents Overview... 3 Configure

More information

WhatsUp Gold v16.2 Installation and Configuration Guide

WhatsUp Gold v16.2 Installation and Configuration Guide WhatsUp Gold v16.2 Installation and Configuration Guide Contents Installing and Configuring Ipswitch WhatsUp Gold v16.2 using WhatsUp Setup Installing WhatsUp Gold using WhatsUp Setup... 1 Security guidelines

More information

Receptionist Console User Guide

Receptionist Console User Guide Receptionist Console User Guide Contents 1.0 Introduction and Purpose... 4 2.0 Common deployments of the Receptionist Console... 4 2.1 Fixed Receptionist Console... 4 2.2 Soft Receptionist Console... 4

More information