2 The company Lombardini Marine, a division of the Lombardini Group, was set up with the objective of preparing and marketing engines for marine applications based on well-established and reputed FOCS and CHD families. Lombardini Marine is a very modern structure managed by a group of persons highly experienced in the marine engine field and capable of applying to this specific sector the most advanced available technology.
3 The product This series of exceptionally light and compact engines, features very high reliability in every condition; furthermore, this specific project has been carried out in order to optimize durability and low fuel consumption without reducing the performance of the engine. Finally, the engines fully conform to the new EC, BSO and EPA regulations on pollution and noise. photo by A. Carloni Particular attention has been paid to sim - plifying the installation and maintenance operations as well as the specific processes that have been applied to the metals to preserve them against the salt corrosion, which place this line of engines among the technologically most advanced ones today available. Lombardini Marine have one of the most efficient and qualified technical assistance organizations offering a fast and highly professional service which has been developed by the Lombardini Group as a long-term commitment towards its customers.
4 Technical features FOCS Robustness, sturdiness and minimum weight The original design concept as the pearlitic grey cast iron cylinder head with integral reborable twin arranged liners, with cross flow intake and exhaust pipes, has allowed the reduction of the engine lenght assuring at the same time an exceptional sturdiness. The LDW 502 M, which has been built with an aluminium engine block and reborable liners is the lightest of the FOCS series. Low noise Excellent results have been obtained in reducing noise emission thanks to the location of the injection system in the cylinder head, to a ribbing system along all the engine structure and to the complete absence of gears. The overhead camshaft is driven through a cogged belt, especially designed for heavy duty applications to ensure longevity of belt life. The lubrication system is fed by a gerotor oil pump driven directly by the crankshaft. High performances The utilization of newly developed and Lombardini patented pump-injector units, in place of a conventional system, incorporating separate fuel injection pumps and injectors, allows the elimination of fuel pipes and consequently provides a better injection timing with the result of great performance advantages. Low exhaust emissions The Lombardini patented injection system has been tested for exhaust emission levels to the lowest limits. FOCS engines achieved high acclaim with regard to exhaust emissions being well below the EEC requirements. Absence of vibrations The very accurate balancing of the moving components together with optimum combustion allows low vibration levels at all engine speeds. Low servicing costs Components subject more frequent checking are located in the upper part of the engine, just under the cover. This allows easy and low cost equipment maintenance. FOCS project Fully overhead controlling system 4 stroke diesel engines, fresh water cooled via heat exchanger, complete with zinc anode protection, cast-iron engine block (aluminium for LDW 502 M), reborable liners, one piece aluminium cylinder head, indirect injection with unit injector pump in the cylinder head, overhead camshaft with timing belt, vane type lubrication pump on crankshaft, fresh water cooling pump in the engine block, stainless steel water injected exhaust elbow, self-priming sea water pump, air filter, anti-corrosion surface treatment.
5 LDW 502 M 2, , , ,5 10 9,5 9 8,5 8 7, , ,5 8 7,5 6,5 6 5,5 7 6, ,5 5,5 5 4, , BSO, EPA 2006 and EU compliant LDW 702 M 43 4,2 39 3, ,6 3, BSO, EPA 2006 and EU compliant 1. Power at propeller shaft 2. Propeller demand curve Performances curves 3. Maximum torque 4. Fuel consumption Rating refers to engine after running in with reversing gear, air cleaner and water injected stainless steel exhaust elbow under environment conditions of 20 C. Max. rating certified within 5%. Derating 1% approx. every 100 mt. altitude and 2% approx. every 5 C beyond 20 C.
6 LDW 1003 M 69 7,2 65 6,8 61 6, , BSO, EPA 2006 and EU compliant LDW 1404 M 90 9,2 84 8, , BSO, EPA 2006 and EU compliant 1. Power at propeller shaft 2. Propeller demand curve Performances curves 3. Maximum torque 4. Fuel consumption Rating refers to engine after running in with reversing gear, air cleaner and water injected stainless steel exhaust elbow under environment conditions of 20 C. Max. rating certified within 5%. Derating 1% approx. every 100 mt. altitude and 2% approx. every 5 C beyond 20 C.
7 Technical features CHD Dimensions The camshaft is located in the upper part of the crankcase to allow a reduced width in the lower area of the engine. The innovative design of the gear train, the injection system design and location, and the reduced cylinder pitch, shorten the engine lenght. Operational comfort The special crankshaft balancing gives exceptional low vibrations and ensures an excellent operational performance during use. Reduction in noise emission The innovative design of the fuel injection system, as well as the utilization of hypereutectic pistons which reduce piston slap, and the utilization of a heavy-duty block, assist in greatly reducing noise levels that are normally associated with diesel engines. Performance The QLC pump, offers high performances on all engine speed. Compared to the conventional injection pump, QLC features a one way flow and a unique delivery fuel system that prevents unwanted variations on injection pressure and timing, eliminating gas bubbles. Environmental behaviour This line of engines, due to their advanced design of the injection and combustion systems results in improved environmental behaviour in conformity with expected pollution limits. These exhaust emissions and the engines performances are checked with dedicated test rigs on 100% of the Lombardini Marine production. Easy maintenance All maintenance operations are made easier due to the simple construction of the product. Also for maintenance of the QLC pump it is not strictly necessary to involve the services of a pump specialist, but the servicing of parts can be completed by any qualified workshop. CHD project Compact heavy duty 4 stroke diesel engines, fresh water cooled via heat exchanger with zinc anode protection, cast-iron engine block, one piece cast-iron cylinder head, reborable liners, indirect injection, gear driven single shaft with push rod valve operation, hydraulic tappet, crankshaft mounted vane type lubrication pump, water injected stainless steel exhaust elbow, self-priming sea water pump, air filter. Special anti-corrosion treatment.
8 LDW 1904 M BSO and EU compliant LDW 2204 M , , , , BSO, EPA 2006 and EU compliant
9 LDW 2204 MT ,43 19, , , BSO and EU compliant 1. Power at propeller shaft 2. Propeller demand curve Performances curves 3. Maximum torque 4. Fuel consumption Rating refers to engine after running in with reversing gear, air cleaner and water injected stainless steel exhaust elbow under environment conditions of 20 C. Max. rating certified within 5%. Derating 1% approx. every 100 mt. altitude and 2% approx. every 5 C beyond 20 C. Accessories Rubber mounts for: LDW 502 M Rubber mounts for: LDW 702 M - LDW 1003 M - LDW 1404 M Rubber mounts for: LDW 1904 M - LDW 2204 M - LDW 2204 MT
10 De Luxe Maxi instrument panel Key, start button, acoustic alarm, analogue instruments (revolution counter, water temperature, oil pressure), LCD display alternating voltmeter and hour counter, warning lamps (oil pressure, water temperature, alternator charger, glow plugs, water presence in the fuel predisposition, generic alarm), fuse. De Luxe instrument panel Key, start button, acoustic alarm, analogue instruments (revolution counter, water temperature), LCD display alternating voltmeter and hour counter, warning lamps (oil pressure, water temperature, alternator charger, glow plugs, water presence in the fuel predisposition, generic alarm), fuse. Standard Plus digital instrument panel Key, start button, acoustic alarm, digital indicator (rpm counter, hour counter, water temperature, voltmeter, oil pressure predisposition), warning lamps (oil pressure, water temperature, alternator, glow plugs, low battery voltage), fuse.
11 Specifications LDW 502 M LDW 702 M LDW 1003 M LDW 1404 M LDW 1904 M LDW 2204 M LDW 2204 MT Cylinders Bore & stoke 72x62 75x77,6 75x77,6 75x77,6 88x82 88x90,4 88x90,4 Displacement cm Max HP Power KW 9,5 14,7 22,1 29,4 36, At the prop. shaft HP 11, KW 8,5 13,2 20,6 27,2 34, RPM Compression ratio 22,3:1 22,8:1 22,8:1 22,8:1 22:1 22:1 22:1 Weight kgs (dry) Height mm Width mm Length mm with TECHNODRIVE reversing gear with TECHNODRIVE TMC 40 reversing gear with TECHNODRIVE TMC 60 reversing gear with TECHNODRIVE TMC 260 reversing gear Standard equipment on inboard engines 12V electric starter; 120A alternator (exception of LDW 502M with 40A alternator); sea water pump; fuel lift pump; sump oil extraction pump (exception of LDW 502M); dry air filter; fuel filter; 2:1 ratio for right hand rotation mechanical reversing gear (on request hydraulic for CHD series), further ratios available on request; cable end fittings for throttle, gear and engine stop; Standard Plus digital instrument panel (except for LDW 2204MT supplied with De Luxe instrument panel); 5 meters loom; tool kit; use and maintenance booklet.
12 Transmission S-Drive S-DRIVE Project The Lombardini Marine S-Drive transmission (10 40 cv) and S-Drive M transmission (40 80 cv) have been developed from our experience gained from years of sailboat racing. This experience in collaboration with many professional skippers helped us to devise transmissions featuring the Transmission S-Drive M essential requirements of sturdiness and reliability whilst, at the same time, offering the minimum water resistance during sailing.
13 Technical data Oil Filler Cap 2 Helical gears (reduction ratio 2.18:1 in S-Drive transmission and 1.92:1 in S-Drive M transmission and 1.8:1 in S-Drive M Turbo transmission) 3 Bronze clutch assembly with double cone 4 Mechanical servo-controlled clutch 5 Coupling 6 Sea cock 7 Rubber membrane 8 Electrochemical treatment 9 Electroplating 10 Epoxy paint 11 Marine paint 12 Seawater inlets (6 lateral, 1 lower) 13 Oil reservoir 14 Folding blades or fixed on request propeller: - for S-Drive (10-40 CV) fit LH or RH propeller - for S-Drive M (40-80 CV) fit LH propeller 15 Thrust bearings 16 Zinc anode
14 An edge to cut the sea The shape of the submerged part of drive has been evolved to incorporate an excellent hydrodynamic profile with an extremely low drag coefficient, where the drive s section and chord are reduced to the minimum, for optimum boat speeds between 4 and 12 knots. The axial thrust is handled by a special conical bearing arrangement. To make the installation easier, the drive has its own built-in sea water inlet and is supplied with a sea cock. Reversing gear: safety and reliability The clutch assembly has been developed to ensure soft and precise gear engagement. A technologically advanced metal-spray surface treatment on the bronze clutch cone allows the oil to drain quickly from the clutch when maneuvering, ensuring smooth, positive shifts. Gears: technology of the future for improved comfort Particular attention has been paid to the design of the gear teeth since mechanical noise mostly depends on the profile of the gears adopted. Conical gears with helical teeth incorporating a special involute shape, which allows continuous contact between the gear tooth surfaces, reduce gear noise. The GLEASON method is used during manufacture to guarantee minimum tolerances on the special alloy steel teeth, which are carburized and hardened for maximum life.
15 Lubrication Lubrication throughout both the upper gear mechanism and the lower part of the drive is assured by utilizing a single oil path. The oil is circulated by the pumping effect of the special gear profile. The large capacity of the oil sump in the drive allows longer intervals between servicing. Oil cooling is assured by the contact of the drive with the sea water. Protection against corrosion and galvanic action The drive is protected against corrosion by the use of a special aluminium alloy with a reduced copper content and stainless steel is employed for all shafts, nuts and bolts. Two electrochemical treatments, before and after machining, followed by an electro-deposition paint process and two coats of special marine paint protect the external surfaces. An extra large zinc, directly mounted on the drive provides protection against galvanic corrosion. Sealing membrane: reliability and sailing pleasure The sealing gasket is made from a special rubber resistant to both hydrocarbons and sea water. Its special shape in combination with the strength of the rubber ensure maximum life and durability and allows the drive to move independently from the hull, which promotes a pleasant sailing with no vibration being transmitted to the boat. Weight Particular attention has been taken with regard to weight reduction, in anticipation of applications on board racing boats; reinforcement ribs have been employed to increase the mechanical strength of the drive housing without reducing reliability.
17 Overall dimensions CHD engines with S-Drive M transmission LDW 1904 SD - LDW 2204 SD LDW 2204 TSD
18 Specifications S-Drive transmission LDW 502 SD LDW 702 SD LDW 1003 SD LDW 1404 SD LDW 1904 SD LDW 2204 SD LDW 2204 TSD Cylinders Bore & stoke 72x62 75x77,6 75x77,6 75x77,6 88x82 88x90,4 88x90,4 Displacement cm Max HP Power KW 9,5 14,7 22,1 29,4 36, ,8 At the prop. shaft HP 11, KW 8,5 13,2 20,6 27,2 34, RPM Weight kgs (dry)
20 Sales Office: Reggio Emilia - Italia Via Cav. del Lavoro Adelmo Lombardini, 2 Tel Fax Factory: Vazia - Rieti - Italia Via E. Greco, 3/a Tel Fax Lombardini Marine is a division of: 05/10 REV 6 Cod Capitale Sociale ,00 euro int. vers Reggio Emilia - Italia - Via Cav. del Lavoro Adelmo Lombardini, 2 Cas. post Tel Telegr.: Lombarmotor R.E.A Reg. Impr. Cod. Fisc./P.IVA CEE code: IT Factory reserves the right to alter specifications without prior notice.
PERFORMANCE ENGINEERING PERFORMANCE ENGINEERING Every part, every component, every system on a KOHLER engine is guided by our exclusive Performance Engineering standards standards that drive us to operate
SAILBOAT 2015 ENGINES, OPTIONS AND NEWS 2 A MATTER OF RELIABILITY A MATTER OF RELIABILITY Whether you see sailing as a purely fun and relaxing pastime or as a challenge to conquer sea and wind, you always
The Perkins 4000 Series family of 6, 8, 12 and 16 cylinder diesel engines was designed in advance of today s uncompromising demands within the power generation industry and includes superior performance
Ref: 1740, Nov 2015 The Yachtmans Choice... A competitive price 10 to 150 hp, engineered in the UK Advanced, compact, quiet reliable engines Easy engine replacement, with our special feet option Amazing
sailboat Proven engines, saildrives and options for all conditions Great equipment. Great sailing. For a sailor there is no better feeling than the wind in your sails, the sun on your face and a boat perfectly
1008/F. The engine for construction equipment....... 4-31 kw at 1200-3600 min -1 These are the characteristics of the 1008/F: Watercooled 2-, 3- and 4-cylinder in-line engines. 4-cylinder 1008 engine turbocharged.
Propeller guide A PERFECT MATCH A correct choice of propeller is absolutely vital to get the most out of your engine and boat. Their performance decides whether the power produced by your engine and drive
This generator set has been designed to meet ISO 88 regulation. This generator set is manufactured in facilities certified to ISO 900. This generator set is available with CE certification. Enclosed product
POWER FOR MARINE PROFESSIONALS RELIABLE AND powerful DIESEL PROPULSION Volvo Penta IPS, Aquamatic and inboard engines for fast, planing workboats Unrivalled performance in every respect The new Volvo Penta
SK 818-5 SK818-5 SK818-5 S KID S TEER L OADER NET POWER SAE J1349 34,7 kw OPERATING WEIGHT 2.910 kg OPERATING CAPACITY 870 kg S KID STEER L OADER PRESTAZIONI IN SICUREZZA Power, ease-of-use, and simplicity-of-operation
912. The engine for construction equipment....... 24-82 kw at 1500-2500 min -1 These are the characteristics of the 912: Air-cooled 3-, 4-, 5-, 6-cylinder naturally aspirated in-line-engines. Direct injection.
Volkswagen 1 industrial engine Specifications for Volkswagen Industrial Engine AFD 1.9 ltr. TDI diesel engine EURO 2 Volkswagen AG, Wolfsburg Volkswagen AG reserves the right to introduce amendments or
POWERTECH-E 2.4L 4024 OEM Diesel Engines and Accessories Parts Catalog For Nordco Engine 600047 (JD 4024TF270) (Rev -, Last Update: 06/07) PARTS ORDERING INSTRUCTIONS John Deere parts may be ordered from
Unit C: Agricultural Power Systems Lesson 2: Identifying Engine Systems and Their Components Student Learning Objectives: Instruction in this lesson should result in students achieving the following objectives:
VOLVO PENTA CLASSIC PARTS GENUINE VOLVO PENTA PARTS FOR CLASSIC ENGINES CLASSIC PARTS GENUINE VOLVO PENTA PARTS for CLASSIC engines Classic parts for classic Volvo Penta engines As an owner of a classic
Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pump Eurovacuum EV Series Single Stage Oil Sealed Rotary Vane Pumps Eurovacuum Company is offering its various products to meet industrial vacuum
EG-6 ENGINE PROPER 1. Cylinder Head Cover The cylinder head cover is made of plastic to reduce weight and noise. Acrylic rubber, which excels in heat resistance and reliability, is used for the cylinder
1013 E. The engine for agricultural equipment.... -186 kw at 2300 rpm These are the characteristics of the 1013 E: Modern water-cooled 4- and 6-cylinder in-line engine Turbocharging with charge air cooling
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 507 680 2600 Continuous 430 577 2600 ** Must not be exceeded Description Robust design
GE Marine Clean, lean marine GE s L250 EPA Tier 3 inline diesel engine GE imagination at work GE s marine-class engines A history of proven performance GE Transportation has been serving the transportation
The 4012-46TWG engine has been developed using the latest engineering techniques and builds on the strengths of the already very successful 4012 Series family and addresses today s uncompromising demands
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Maximum Input** Duty kw hp RPM Medium 425 570 2400 Continuous 357 479 2400 ** Must not be exceeded Description Robust design
The 1104D-44TA IOPU is a new addition to the 1100 Series range of IOPU engines. These ultra clean engines are assembled on a new high technology production line. Frequent computerized checks during the
EX ADVANTAGE The EX Advantage. 40 years of superior operation and quality that s second to none. Subaru s EX Series engines offer unmatched performance, and rewrite the standards in ease of starting and
Building upon Perkins proven reputation within the power generation industry, the Perkins 1100 Series range of ElectropaK engines now fit even closer to the needs of their customers. With this 1104C-44TAG2
Lesson A6 2 Identifying Engine Systems and Their Components Unit A. Mechanical Systems and Technology Problem Area 6. Agricultural Power Systems Lesson 2. Identifying Engine Systems and Their Components
Air cooled Diesel engines 2.7-8.8 kw KD15 / 15 LD, the most complete family of single cylinder air cooled engines, comprises 5 models in the power range 2.7 to 8.8 kw. Particularly suited to small agricultur
Steering gear Rotary vane steering gear for smaller vessels The SR series is designed with integrated frequency controlled pumps. General description Rolls-Royce supplies a complete range of steering gear,
Marine Propulsion Systems 7 Down angle, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 875 1172 3000 Light 797 1069 3000 Medium 639 856 3000 Continuous 432 579 2400 ** Must not
Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Description Robust design also withstands continuous duty in workboat applications. Fully works tested, reliable and simple to
Marine Generating Sets 3.7 to 50 kva The Marine Engineer s Preference BetaSet - Standard Marine Generators Beta Marine has considerable experience from over twenty years of manufacturing marine generating
Marine Propulsion Systems 12 V-drive, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 389 522 3500 Light 365 489 3500 Medium 311 416 3500 Continuous 232 311 3200 ** Must not be
Engine catalogue Marine Diesel engines MAN range - heavy duty ENG 10 November 2010 Marine Diesel engines Engine Power Num. of Displacement Design kw cylinders cm3 D2866 190-279 6 12,8 inline D2876 280-360
Marine Propulsion Systems 10 Down angle, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 419 562 4500 Light 394 528 4500 Medium 335 449 4500 Continuous 192 258 3200 ** Must not
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
CREATING POWER SOLUTIONS. 2L41C 3L41C 3L43C 4L41C 4L42C 4L43C Hatz Diesel EN www.hatz-diesel.com Exhaust gas recirculation (EGR) For years already the Hatz 4L42C has been successfully fitted with a robustly
ZETOR TRACTOR MODELS AND TYPES FROM TRACTOR MODEL TO ENGINE TYPE TRACTOR NUMBER OF CYLINDER ENGINE MODEL CYLINDERS DIAMETER TYPE UR1 2011 2511 2 95 Z2001 3011, 3045 3 95 Z3001 3320 3321 3340 3341 3511,
Marine Propulsion Systems 7 Down angle, direct mount marine transmission. Maximum Input** Duty kw hp RPM Pleasure 566 758 3300 Light 509 682 3300 Medium 380 509 3300 Continuous 345 463 3300 ** Must not
SAILBOAT guide ENGINES AND ACCESSORIES GREENER boating with the d series This year, we are proud to introduce a totally new generation of D3 diesels. These new, low-emission and low- rpm engines are specially
The CLIPPER Solutions 111 112 C51 6,5 Hp Ø 350mm 76kg Compact, robust and highly manoeuvrable machines designed for both wet and dry cutting of concrete and asphalt. Machine delivered without diamond blade.
Marine Diesel Engine VF4 VF5 Service Manual VF4.140E VF4.170E VF5.220E VF5.250E Copyright 2009 Vetus N.V. Schiedam Holland Reproduction of text and illustrations, in whole or in part, is strictly prohibited.
Tech Library http://engine.od.ua SisuDiesel Citius-sarjan merimoottorit Puhdas ja vahva valinta Clean and durable choice SisuDiesel AGCO SISU POWER power for the world with over 60 years experience AGCO
PERIODIC MAINTENANCE SCHEDULE Daily and periodic maintenance is important to keep the engine in good operating condition. The following is a summary of maintenance items by periodic maintenance intervals.
Kobelco Extended Warranty Program www.kobelco-europe.com Kobelco Extended Warranty is a convenient, value added way to give your Kobelco customers added security and peace of mind. Benefits of the Kobelco
Marine Propulsion Systems Vertical offset, direct mount marine transmission. Description Reverse reduction marine transmission with hydraulically actuated multi-disc clutches. Suitable for high performance
THRUSTMASTER 100 Series 100kW to 900kW History. Innovation. Power. thrustmaster.net THRUSTMASTER FEATURES PERFORMANCE DURABILITY POWER FLEXIBILITY CONTROL Integral Reduction Box Providing perfect impeller
Selecting an air motor for your application Are you looking for a suitable motor for your construction? The following guide will help you to avoid annoying mistakes which could drive up running costs later.
DUGARD Machine Tools Since 1939 Dugard 400 Slant Bed High Precision CNC Lathe www.dugard.com Superb Performance, Maximum Stability, Maximum Reliability Precision, Power and Capacity Make the Dugard 400
The Mopar advantage Diesel engines and parts When most people look at an engine, they see the whole engine. Mopar Remanufacturing, however, sees the hundreds of parts that are necessary to provide reliable
WWW.JEEPSEA.CO.IL COELMO S GEN SETS DM series COMPARISON DM 350 GENSET WITH COMPETITION ( Power, main sizes and weight ) Power kw Builder Model engine base main sizes mm Length Width Height Weight Kg 3,5
DF175TG/150TG SPECIFICATIONS MODEL DF175TG DF150TG DIMENSIONS ENGINE TYPE FUEL DELIVERY SYSTEM TRANSOM HEIGHT mm (in.) STARTING SYSTEM Four-Stroke DOHC 16 Valve Multi Point Sequential Electronic Fuel Injection
net flywheel power 74 kw - 99 hp max operating weight 16 300 kg PAT DOZER BLADE CAPACITY 2.19 m 3 150BBLADE Specifications ENGINE STAGE IIIA Net flywheel power (ISO 14396/ECE R120)...74 kw/99 hp Rated...2000
Last Update: December 8, 2014 A. Description of System Consultant s Handbook Page 1 of 6 1. Provide a diesel engine driven electric generating unit, factory assembled, tested and certified to operate at
VARIABLE VANE PUMPS V3 (series 30 and 40) Nominal sizes 12; 25; 40; 63 up to p n 100 bar V g 8.5; 19; 32; 47 cm 3 /rev KE 1015 11/02 replaces 07/97 easy commissioning due to automatic bleed facility low
15-1 Cylinder head, removing and replacing WARNING! Do not re-use any fasteners that are worn or deformed in normal use. Some fasteners are designed to be used only once, and are unreliable and may fail
Every Innovation. ISG12. Global Heavy-Duty Engine 350-500 HP (361-373 kw) Use Less, Deliver More. The G Series is Cummins latest global Heavy- Duty engine platform, with the capability to meet worldwide
40000927-WB REPAIR KIT, WATER PUMP 40005124-WB MAIN & ROD BEARING KIT, 16 CYLINDER 40005125-WB MAIN & ROD BEARING KIT, 20 CYLINDER 40006129-WB PISTON, 645E HTG AND TIN PLATED 40006130-WB PISTON, 645 E3
THE LINK TO PERFORMANCE A correct choice of propeller is absolutely vital to get the most out of your engine and boat. And it is not only size and pitch that matters. Genuine Volvo Penta propellers are
VI Rules for Classification and Construction Additional Rules and Guidelines 5 Pumps 1 Guidelines for the Design, Construction and Testing of Pumps Edition 2007 The following Guidelines come into force
TECHNICAL SPECIFICATIONS Model: AD-145 Stand-by automatic gen set. Image for guidance purposes. (400 / 230 V) ENGINE MAKE DEUTZ MODEL BF4M 1013 FC CONTINUOUS POWER: (PRP Prime Power norma ISO 8528-1) 130
INDUSTRIAL DIRECT DRIVEN PISTON COMPRESSORS CL - CH - CK CL - CH - CK Direct driven solution for industry Proven technology, solid construction The CL - CH - CK units are directly driven air-cooled, single
IPS, the future for fast vessels 1 dec 2010 Save fuel and reduce environmental impact 2 dec 2010 Best efficiency with Contra Rotating propellers Double blade area means smaller prop diameter for same output
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
High-mounted stop light The high-level stop light is integrated in the boot. If an LED fails, the complete unit must be replaced. When installing the stop light, take care to ensure that the rubber seal
The Professional Choice in Fluid Management QPM3 Low pressure pump for circulation of oil in hydraulic and lubricating systems The Olaer Group is a global player specialising in innovative, efficient system
Rotary screw compressors kw 5,5 7,5 11 15 18,5 22 30 bar 8 10 13 15 MODULO The sum of technology TriAB Air ends The BALMA screw compressors are fitted with the unique TriAB air ends that are designed and
DIESEL GENERATOR SET MTU 12V1600 DS660 400 230 V/659 kva/50 Hz/Standby Power Series 1600 MTU 12V1600 Optional equipment and finishing shown. Standard may vary. PRODUCT HIGHLIGHTS // Benefits - Industry-leading