2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "2 Port, USB 2.0 High Speed (480 Mbps) Switch, DPDT Analog Switch"

Transcription

1 2 Port, UB 2. High peed (48 Mbps) witch, DPDT Analog witch DG2722 DECRIPTION The DG2722 is 2 port high speed analog switch optimized for UB 2. signal switching. The DG2722 switch is configured in DPDT. It handles bidirectional signal flow, achieving a 9 MHz - 3 db bandwidth, and a port to port crosstalk and isolation at - 49 db. Processed with high density sub micron CMO, the DG2722 provide low parasitic capacitance. ignals are routed with minimized phase distortion and attain a bit to bit skew is as low as 4 p. The DG2722 is designed for a wide range of operating voltages, from 2.7 V to 4.3 V that can be driven directly from one cell Li-ion battery. On-chip circuitry protects against conditions when either the D+/D- lines are shorted to the V BU at the UB port. Additionally, logic control pins ( and ) can tolerate the presence of voltages that are above the supply power rail (). The control logic threshold is guaranteed to be (V IH = 1.3 V/min). Latch up current is 3 ma, as per JED78, and its ED tolerance exceeds 8 kv. Packaged in ultra small miniqfn-1 (1.4 mm x 1.8 mm x. mm), it is ideal for portable high speed mix signal switching application. As a committed partner to the community and the environment, manufactures this product with lead (Pb)-free device termination. The miniqfn-1 package has a nickel-palladium-gold device termination and is represented by the lead (Pb)-free -E4 suffix to the ordering part number. The nickel-palladium-gold device terminations meet all JEDEC standards for reflow and ML rating. As a further sign of 's commitment, the DG2722 is fully RoH complaint. FEATURE Halogen-free according to IEC Definition Wide operation voltage range Low on-resistance, 7 (typical at 3 V) Low capacitance, C ON =.8 pf (typical) 3 db high bandwidth: 9 MHz (typical) Low bit to bit skew: 4 p (typical) Low power consumption Low logic threshold: V Power down protection: D+/D- pins can tolerate up to V when = V Logic ( and ) above tolerance 8 kv ED protection (HBM) Latch-up current 3 ma per JED78 Lead (Pb)-free low profile miniqfn-1 (1.4 mm x 1.8 mm x. mm) Compliant to RoH Directive 22/9/EC APPLICATION Cellular phones Portable media players PDA Digital camera GP Notebook computer TV, monitor, and set top box FUNCTIONAL BLOCK DIAGRAM AND PIN CONFIGURATION miniqfn-1l Pin 1: LONG LEAD Control D+ HD1+ D- HD HD2+ HD2- Pin 1 Rx Top View Device marking: Rx for DG2722 x = Date/Lot Traceability Code 1 THE PRODUCT DECRIBED HEREIN AND THI DOCUMENT ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT /doc?91

2 ORDERING INFORMATION Temp. Range Package Part Number - 4 C to 8 C miniqfn-1 DG2722DN-T1-E4 TRUTH TABLE (Pin 8) (Pin 1) Function D+ = HD1+ and D- = HD1-1 D+ = HD2+ and D- = HD2-1 X Disconnect PIN DECRIPTION Pin Name HD1±, HD2±, D± Description Bus witch Enable elect Input Data Port ABOLUTE MAXIMUM RATING (T A = 2 C, unless otherwise noted) Parameter Limit Unit Reference to -.3 to,, D±, HD1±, HD2± a -.3 to ( +.3) V Current (Any Terminal except,, D±, HD1±, HD2±) 3 Continuous Current (,, D±, HD1±, HD2±) ± 2 ma Peak Current (Pulsed at 1 ms, 1 % Duty Cycle) ± torage Temperature (D uffix) - 6 to 1 C Power Dissipation (Packages) b miniqfn-1 c 28 mw ED (Human Body Model) I/O to 8 kv Latch-up (Current Injection) 3 ma Notes: a. ignals on,, D±, HD1±, HD2± exceeding will be clamped by internal diodes. Limit forward diode current to maximum current ratings. b. All leads welded or soldered to PC board. c. Derate 2.6 mw/ C above 7 C. PECIFICATION ( = 3 V) Parameter ymbol Test Conditions Otherwise Unless pecified Temp. a Limits - 4 C to 8 C Min. b Typ. c Max. b Analog witch Analog ignal Range d V ANALOG R D(on) Full V On-Resistance R D(on) = 3 V, I D± = 8 ma, V HD1/2± =.4 V Room 7 8 Full 9 On-Resistance Match d R ON = 3 V, I D± = 8 ma, V HD1/2± =.4 V Room.8 On-Resistance Resistance Flatness d R ON Flatness = 3 V, I D± = 8 ma, V HD1/2± = V, 1 V Room 2 = 4.3 V, V witch Off Leakage Current I HD1/2± =.3 V, 3 V, (off) V D± = 3 V,.3 V Full = 4.3 V, V Channel On Leakage Current I HD1/2± =.3 V, 4 V, (on) V D± = 4 V,.3 V Full Digital Control = 3 V to 3.6 V Full 1.3 Input Voltage High V INH = 4.3 V Full 1. Input Voltage Low V INL = 3 V to 4.3 V Full. Input Capacitance C IN Full 6. pf Input Current I INL or I INH V IN = or Full µa Unit na V 2 THE PRODUCT DECRIBED HEREIN AND THI DOCUMENT ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT /doc?91

3 PECIFICATION ( = 3 V) Limits Test Conditions - 4 C to 8 C Parameter ymbol Otherwise Unless pecified Temp. a Min. b Typ. c Max. b Unit Dynamic Characteristics Break-Before-Make Time e, d t BBM Room Full, Turn-On Time e, d t ON = 3 V, V D1/2 ± = 1. V, R L =, Room C L = 3 pf Full 3 ns, Turn-Off Time e, d Room t OFF Full 2 Charge Injection d Q INJ C L = 1 nf, R GEN =, V GEN = V. pc Off-Isolation d OIRR = 3 V to 3.6 V, R L =, C L = pf, - 3 Crosstalk d X TALK f = 24 MHz - 4 db Bandwidth d BW = 3 V to 3.6 V, R L =, - 3 db 9 MHz D+/D- On Capacitance C ON = 3.3 V, = V, f = 24 MHz.8 Room D1n, D2n Off Capacitance C OFF = = 3.3 V, f = 24 MHz 2.2 pf Channel-to-Channel kew d t K(O) kew Off Opposite Transitions of the ame Output d t K(p) = 3 V to 3.6 V, R L =, C L = pf 2 ps Total Jitter d t J 2 Power upply Power upply Range V Power upply Current I+ V IN = V, or Full 2 µa Notes: a. Room = 2 C, Full = as determined by the operating suffix. b. The algebraic convention whereby the most negative value is a minimum and the most positive a maximum, is used in this datasheet. c. Typical values are for design aid only, not guaranteed nor subject to production testing. d. Guarantee by design, not subjected to production test. e. V IN = input voltage to perform proper function. f. Crosstalk measured between channels. tresses beyond those listed under Absolute Maximum Ratings may cause permanent damage to the device. These are stress ratings only, and functional operation of the device at these or any other conditions beyond those indicated in the operational sections of the specifications is not implied. Exposure to absolute maximum rating conditions for extended periods may affect device reliability. 3 THE PRODUCT DECRIBED HEREIN AND THI DOCUMENT ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT /doc?91

4 TYPICAL CHARACTERITIC (T A = 2 C, unless otherwise noted) = 2.6 V = 3. V = 3.3 V = 3.6 V = 4.3 V T = 2 C I = 8 ma D1± = 2.6 V I ON = 8 ma - 4 C + 8 C + 2 C R ON vs. V D and ingle upply Voltage R ON vs. Analog Voltage and Temperature = 3. V I ON = 8 ma - 4 C + 8 C + 2 C = 3.3 V I ON = 8 ma - 4 C + 8 C + 2 C R ON vs. Analog Voltage and Temperature R ON vs. Analog Voltage and Temperature = 3.6 V I ON = 8 ma + 8 C - 4 C + 2 C = 4.3 V I ON = 8 ma + 8 C - 4 C + 2 C R ON vs. Analog Voltage and Temperature R ON vs. Analog Voltage and Temperature 4 THE PRODUCT DECRIBED HEREIN AND THI DOCUMENT ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT /doc?91

5 TYPICAL CHARACTERITIC (T A = 2 C, unless otherwise noted) I+ - upply Current (A) 1 ma 1 ma 1 µa 1 µa 1 µa 1 na 1 na 1 na = 4.3 V = 3.6 V = 3.3 V = 3. V = 2.6 V Leakage Current (pa) = 4.3 V I D±(ON) I D±(OFF) I D±(OFF) 1 pa K 1 K 1 K 1 M 1 M Input witching Frequency (Hz) upply Current vs. Input witching Frequency Temperature ( C) Leakage Current vs. Temperature V T - witching Threshold (V) V IH.9.8 V IL upply Voltage (V) Gain (db) Frequency (MHz) witching Threshold vs. upply Voltage Gain vs. Frequency, = 3.3 V Off Isolation (db) Frequency (MHz) Off-Isolation, = 3.3 V Crosstalk (db) Frequency (MHz) Crosstalk, = 3.3 V THE PRODUCT DECRIBED HEREIN AND THI DOCUMENT ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT /doc?91

6 TET CIRCUIT witch Input Logic Input HD1± or HD2± D± witch Output R L V OUT C L 3 pf Logic Input witch Output V INH V INL V % t r t f ns ns.9 x V OUT V t ON t OFF C L (includes fixture and stray capacitance) V OUT D± ( ) R L R L R ON Logic "1" = witch on Logic input waveforms inverted for switches that have the opposite logic sense. Figure 1. witching Time V HD1± HD1± D± V O Logic Input V INH V INL t r < ns t f < ns V HD2± HD2± R L C L 3 pf HD1± = HD2± V O 9 % witch Output V t D t D C L (includes fixture and stray capacitance) Figure 2. Break-Before-Make Interval V gen + R gen V IN = - HD1± or HD2± D± V OUT C L = 1 nf V OUT IN On V OUT Off Q = OUT x C L On IN depends on switch configuration: input polarity determined by sense of switch. Figure 3. Charge Injection 6 THE PRODUCT DECRIBED HEREIN AND THI DOCUMENT ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT /doc?91

7 TET CIRCUIT 1 nf 1 nf HD1± or HD2± Analyzer R L D± V, 2.4 V V, 2.4 V D± HD1± or HD2± Meter HP4192A Impedance Analyzer or Equivalent f = 1 MHz Off Isolation = 2 log V D± V HD2± or HD1± Figure 4. Off-Isolation Figure. Channel Off/On Capacitance maintains worldwide manufacturing capability. Products may be manufactured at one of several qualified locations. Reliability data for ilicon Technology and Package Reliability represent a composite of all qualified locations. For related documents such as package/tape drawings, part marking, and reliability data, see /ppg? THE PRODUCT DECRIBED HEREIN AND THI DOCUMENT ARE UBJECT TO PECIFIC DICLAIMER, ET FORTH AT /doc?91

8 Package Information MINI QFN-1L CAE OUTLINE DIM MILLIMETER INCHE MIN. NAM. MAX. MIN. NAM. MAX. A A b c.1 REF.6 REF D E e.4 BC.16 BC L L ECN T-739-Rev. A, 12-Feb-7 DWG: 97 Document Number: Feb-7 1

9 PAD Pattern RECOMMENDED MINIMUM PAD FOR MINI QFN 1L 1.7 (.669) 9 x.63 (.221).663 (.261).2 (.79) (.827).4 (.17) Pitch 1 x.22 (.89) Mounting Footprint Dimensions in mm (inch) Document Number: 664 Revision: -Mar-1 1

10 Legal Disclaimer Notice Vishay Disclaimer ALL PRODUCT, PRODUCT PECIFICATION AND DATA ARE UBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DEIGN OR OTHERWIE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, Vishay ), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. tatements regarding the suitability of products for certain types of applications are based on Vishay s knowledge of typical requirements that are often placed on Vishay products in generic applications. uch statements are not binding statements about the suitability of products for a particular application. It is the customer s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer s technical experts. Product specifications do not expand or otherwise modify Vishay s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoH-Compliant fulfill the definitions and restrictions defined under Directive 211/6/EU of The European Parliament and of the Council of June 8, 211 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoH Directive 22/9/EC. We confirm that all the products identified as being compliant to Directive 22/9/EC conform to Directive 211/6/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC J79A standards. Please note that some Vishay documentation may still make reference to the IEC definition. We confirm that all the products identified as being compliant to IEC conform to JEDEC J79A standards. Revision: 2-Oct-12 1 Document Number: 91

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch

700 MHz, -3 db Bandwidth; Dual SPDT Analog Switch 7 MHz, -3 db Bandwidth; Dual SPDT Analog Switch DESCRIPTION is a low R ON, high bandwidth analog switch configured in dual SPDT. It achieves 5.5 Ω switch on resistance, greater than 7 MHz -3 db bandwidth

More information

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS

DG2706. High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch. Vishay Siliconix DESCRIPTION FEATURES APPLICATIONS High Speed, Low Voltage, 3, Quad SPDT CMOS Analog Switch DESCRIPTION The DG2706 is a high speed, low voltage, low On-resistance, quad SPDT (single pole double throw) analog switch. It operates from a.6

More information

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches

High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DG, DG High-Bandwidth, Low Voltage, Dual SPDT Analog Switches DESCRIPTION The DG/DG are monolithic CMOS dual single-pole/double-throw (SPDT) analog switchs. They are specifically designed for low-voltage,

More information

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS

DG2515, DG2516. 3-Ω, 235-MHz Bandwidth, Dual SPDT Analog Switch. Vishay Siliconix. Not for New Design. RoHS COMPLIANT DESCRIPTION FEATURES BENEFITS Not for New Design DG, DG -Ω, -MHz Bandwidth, Dual SPDT Analog Switch DESCRIPTION The DG, DG are low-voltage dual single-pole/ double-throw monolithic CMOS analog switches. Designed to operate from.8 V

More information

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES

DG2731/2732/2733. Low Voltage, 0.4 Ω, Dual SPDT Analog Switch. Vishay Siliconix. RoHS COMPLIANT FEATURES Low Voltage, 0.4 Ω, Dual SPDT Analog Switch DG273/2732/2733 DESCRIPTION The DG273/2732/2733 are low voltage, low on-resistance, dual single-pole/double-throw (SPDT) monolithic CMOS analog switches designed

More information

DG4157. Low Voltage, 1 Ω Single SPDT Analog Switch (1:2 Multiplexer) with Power Down Protection. Vishay Siliconix. www.vishay.com DESCRIPTION FEATURES

DG4157. Low Voltage, 1 Ω Single SPDT Analog Switch (1:2 Multiplexer) with Power Down Protection. Vishay Siliconix. www.vishay.com DESCRIPTION FEATURES Low Voltage, Ω ingle PDT nalog witch (:2 Multiplexer) with Power Down Protection DECRIPTION The is a high performance single pole double throw analog switch designed for.65 V to 5.5 V operation with single

More information

DG3157. High-Speed, Low R ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer/Demultiplexer Bus Switch) DESCRIPTION FEATURES

DG3157. High-Speed, Low R ON, SPDT Analog Switch. Vishay Siliconix. (2:1 Multiplexer/Demultiplexer Bus Switch) DESCRIPTION FEATURES High-peed, Low R ON, PDT nalog witch (2:1 Multiplexer/Demultiplexer Bus witch) DG3157 DECRIPTION The DG3157 is a high-speed single-pole double-throw, low power, TTL-Compatible bus switch. Using sub-micro

More information

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES

DG2302. High-Speed, Low r ON, SPST Analog Switch. Vishay Siliconix. (1-Bit Bus Switch with Level-Shifter) RoHS* COMPLIANT DESCRIPTION FEATURES High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch with Level-Shifter) DG2302 DESCRIPTION The DG2302 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,

More information

High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch)

High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) High-Speed, Low r ON, SPST Analog Switch (1-Bit Bus Switch) DG2301 ishay Siliconix DESCRIPTION The DG2301 is a high-speed, 1-bit, low power, TTLcompatible bus switch. Using sub-micron CMOS technology,

More information

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30

Power MOSFET FEATURES. IRFSL11N50APbF SiHFSL11N50A-E3. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 500 V Gate-Source Voltage V GS ± 30 Power MOFET IRFL11N50, ihfl11n50 PRODUCT UMMRY V D (V) 500 R D(on) ( ) V G = 10 V 0.55 Q g (Max.) (nc) 51 Q gs (nc) 12 Q gd (nc) 23 Configuration ingle I 2 PK (TO262) G D FETURE Dynamic dv/dt Rating Repetitive

More information

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF520PbF SiHF520-E3 IRF520 SiHF520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.7 Q g (Max.) (nc) 16 Q gs (nc) 4.4 Q gd (nc) 7.7 Configuration Single TO0AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

High Performance Schottky Rectifier, 1 A

High Performance Schottky Rectifier, 1 A High Performance Schottky Rectifier, A VS-MQNPbF Cathode Anode DO-24AC (SMA) PRODUCT SUMMARY Package DO-24AC (SMA) I F(AV) A V R V V F at I F.78 V I RM ma at 25 C T J max. 5 C Diode variation Single die

More information

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20

Power MOSFET. IRF9520PbF SiHF9520-E3 IRF9520 SiHF9520. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS - 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 10 V 0.60 Q g (Max.) (nc) 18 Q gs (nc) 3.0 Q gd (nc) 9.0 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D PChannel

More information

Schottky Rectifier, 100 A

Schottky Rectifier, 100 A Schottky Rectifier, A VS-BGQ Cathode Anode PowerTab PRODUCT SUMMARY Package PowerTab I F(AV) A V R V V F at I F 0.82 V I RM 180 ma at 125 C T J max. 175 C Diode variation Single die E AS 9 mj FEATURES

More information

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero

High Speed Infrared Emitting Diode, 870 nm, GaAlAs Double Hetero TSFF55 High Speed Infrared Emitting Diode, 87 nm, GaAlAs Double Hetero 26 DESCRIPTION TSFF55 is an infrared, 87 nm emitting diode in GaAlAs double hetero (DH) technology with high radiant power and high

More information

P-Channel 20 V (D-S) MOSFET

P-Channel 20 V (D-S) MOSFET Si30CDS P-Channel 0 V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.) - 0 0. at V GS = - 4.5 V - 3. 0.4 at V GS = -.5 V -.7 3.3 nc TO-36 (SOT-3) FEATURES Halogen-free According

More information

P-Channel 20-V (D-S) MOSFET

P-Channel 20-V (D-S) MOSFET Si33DS P-Channel -V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).39 at V GS = -.5 V -.7 -.5 at V GS = -.5 V -..68 at V GS = -.8 V - 3.5 FEATURES Halogen-free According to IEC 69-- Available

More information

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323

PS323. Precision, Single-Supply SPST Analog Switch. Features. Description. Block Diagram, Pin Configuration, and Truth Table. Applications PS323 PS323 Features ÎÎLow On-Resistance (33-ohm typ.) Minimizes Distortion and Error Voltages ÎÎLow Glitching Reduces Step Errors in Sample-and-Holds. Charge Injection, 2pC typ. ÎÎSingle-Supply Operation (+2.5V to

More information

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A

Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A Standard Recovery Diodes, Generation 2 DO-5 (Stud Version), 95 A 95PF(R)... DO-203AB (DO-5) PRODUCT SUMMARY I F(AV) Package Circuit configuration 95PF(R)...W DO-203AB (DO-5) 95 A DO-203AB (DO-5) Single

More information

High-Speed, Low-Glitch D/CMOS Analog Switches

High-Speed, Low-Glitch D/CMOS Analog Switches G6, G62, G63 High-Speed, Low-Glitch /CMOS Analog Switches ESCRIPTION The G6, G62, G63 feature high-speed lowcapacitance lateral MOS switches. Charge injection has been minimized to optimize performance

More information

P-Channel 60 V (D-S) MOSFET

P-Channel 60 V (D-S) MOSFET TP6K P-Channel 6 V (D-S) MOSFET G S PRODUCT SUMMARY V DS (V) R DS(on) ( ) V GS(th) (V) I D (ma) - 6 6 at V GS = - V - to - - 85 TO-6 (SOT-) Top View D Marking Code: 6Kwll 6K = Part Number Code for TP6K

More information

Description. For Fairchild s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html.

Description. For Fairchild s definition of Eco Status, please visit: http://www.fairchildsemi.com/company/green/rohs_green.html. FSA2357 Low R ON 3:1 Analog Switch Features 10µA Maximum I CCT Current Over an Expanded Control Voltage Range: V IN=2.6V, V CC=4.5V On Capacitance (C ON): 70pF Typical 0.55Ω Typical On Resistance (R ON)

More information

Power MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF540PbF SiHF540-E3 IRF540 SiHF540. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) ( ) = 0.077 Q g (Max.) (nc) 72 Q gs (nc) 11 Q gd (nc) 32 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel MOSFET

More information

P-Channel 1.25-W, 1.8-V (G-S) MOSFET

P-Channel 1.25-W, 1.8-V (G-S) MOSFET Si5DS P-Channel.5-W,.-V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).5 at V GS = -.5 V ±.5 -.7 at V GS = -.5 V ±. at V GS = -. V ± FEATURES Halogen-free According to IEC 9-- Available TrenchFET

More information

Audio Jack Detector with Send / End Detect

Audio Jack Detector with Send / End Detect Audio Jack Detector with Send / End Detect DESCRIPTION The is an audio jack detector and pop noise control switch IC. It integrates the circuits necessary to detect the presence of a stereo headset with

More information

Low-Power, High-Speed CMOS Analog Switches

Low-Power, High-Speed CMOS Analog Switches Low-Power, High-peed MO Analog es G1/3/ -V upply Max Rating 1-V Analog ignal Range On-Resistance r (on) : Low Leakage I (on) : pa Fast ing t ON : ns Ultra Low Power Requirements P :.3 W TTL, MO ompatible

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection Optocoupler, Phototransistor Output, with Base Connection FEATURES i794-4 DESCRIPTION This datasheet presents five families of Vishay industry standard single channel phototransistor couplers. These families

More information

Power MOSFET FEATURES. IRF9640PbF SiHF9640-E3 IRF9640 SiHF9640

Power MOSFET FEATURES. IRF9640PbF SiHF9640-E3 IRF9640 SiHF9640 Power MOSFET PRODUCT SUMMARY V DS (V) 200 R DS(on) (Ω) = 10 V 0.50 Q g (Max.) (nc) 44 Q gs (nc) 7.1 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G S D

More information

5 V, 1 A H-Bridge Motor Driver

5 V, 1 A H-Bridge Motor Driver , A H-Bridge Motor Driver DESCRIPTION The SIP200 is an integrated, buffered H-bridge with TTL and CMOS compatible inputs with the capability of delivering up to A continuous current at DD supply. The SIP200

More information

CMOS 5 V/5 V 4 Dual SPST Switches ADG621/ADG622/ADG623

CMOS 5 V/5 V 4 Dual SPST Switches ADG621/ADG622/ADG623 a FEATURE 5.5 (Max) On Resistance.9 (Max) On-Resistance Flatness 2.7 V to 5.5 ingle upply 2.7 V to 5.5 V ual upply Rail-to-Rail Operation 1-Lead OIC Package Typical Power Consumption (

More information

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP

Thick Film Resistor Networks, Military, MIL-PRF-83401 Qualified, Type RZ010 and RZ020 Dual-In-Line, Molded DIP MDM (Military M831/1 and /2) Thick Film Resistor Networks, Military, MIL-PRF-831 Qualified, Type RZ1 and RZ2 Dual-In-Line, Molded DIP STANDARD ELECTRICAL SPECIFICATIONS VISHAY DALE MODEL/ PIN NO. MIL STYLE

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL51 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 96 1155 TSAL51 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power, molded in a blue-gray plastic

More information

Dual P-Channel 2.5 V (G-S) MOSFET

Dual P-Channel 2.5 V (G-S) MOSFET Si593DC Dual P-Channel.5 V (G-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (A).55 at V GS = -.5 V ±.9 -.8 at V GS = - 3.6 V ±.7.6 at V GS = -.5 V ±. FEATURES Halogen-free According to IEC 69-- Definition

More information

Pulse Proof Thick Film Chip Resistors

Pulse Proof Thick Film Chip Resistors Pulse Proof Thick Film Chip Resistors FEATURES High pulse performance, up to kw Stability R/R 1 % for h at 70 C AEC-Q200 qualified Material categorization: for definitions of compliance please see www.vishay.com/doc?99912

More information

Schottky Rectifier, 1.0 A

Schottky Rectifier, 1.0 A Schottky Rectifier, 1.0 A VS-BQ060PbF Vishay High Power Products FEATURES Small foot print, surface mountable Low forward voltage drop SMB Cathode Anode High frequency operation Guard ring for enhanced

More information

Power MOSFET FEATURES. IRFZ44PbF SiHFZ44-E3 IRFZ44 SiHFZ44 T C = 25 C

Power MOSFET FEATURES. IRFZ44PbF SiHFZ44-E3 IRFZ44 SiHFZ44 T C = 25 C Power MOSFET PRODUCT SUMMARY (V) 60 R DS(on) (Ω) V GS = 10 V 0.028 Q g (Max.) (nc) 67 Q gs (nc) 18 Q gd (nc) 25 Configuration Single FEATURES Dynamic dv/dt Rating 175 C Operating Temperature Fast Switching

More information

CMOS 1.8 V to 5.5 V, 2.5 Ω SPDT Switch/2:1 Mux in Tiny SC70 Package ADG779

CMOS 1.8 V to 5.5 V, 2.5 Ω SPDT Switch/2:1 Mux in Tiny SC70 Package ADG779 CMO 1.8 V to 5.5 V, 2.5 Ω PT witch/2:1 Mux in Tiny C70 Package AG779 FEATURE 1.8 V to 5.5 V single supply 2.5 Ω on resistance 0.75 Ω on-resistance flatness 3 db bandwidth >200 MHz Rail-to-rail operation

More information

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604

1 pc Charge Injection, 100 pa Leakage CMOS 5 V/5 V/3 V 4-Channel Multiplexer ADG604 a FEATURES 1 pc Charge Injection (Over the Full Signal Range) 2.7 V to 5.5 V ual Supply 2.7 V to 5.5 ingle Supply Automotive Temperature Range: 4 C to +125 C 1 pa Max @ 25 C Leakage Currents 85 Typ On

More information

Power MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540

Power MOSFET FEATURES. IRL540PbF SiHL540-E3 IRL540 SiHL540 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) (Ω) = 5.0 V 0.077 Q g (Max.) (nc) 64 Q gs (nc) 9.4 Q gd (nc) 27 Configuration Single TO220AB G DS ORDERING INFORMATION Package Lead (Pb)free SnPb G D S NChannel

More information

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package

Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package ILD25T, ILD26T, ILD27T, ILD211T, ILD213T Optocoupler, Phototransistor Output, Dual Channel, SOIC-8 Package i17925 A1 C2 A3 C4 i17918-2 8C 7E 6C 5E DESCRIPTION The ILD25T, ILD26T, ILD27T, ILD211T, and ILD213T

More information

Insulated Precision Wirewound Resistors Axial Leads

Insulated Precision Wirewound Resistors Axial Leads Insulated Precision Wirewound Resistors Axial Leads In wirewound precision resistors, the series holds a leading position in professional applications whenever an excellent stability of the ohmic value

More information

N-Channel 100 V (D-S) MOSFET

N-Channel 100 V (D-S) MOSFET Si4DS N-Channel V (D-S) MOSFET MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) a Q g (Typ.).4 at V GS = V..67 at V GS = 6 V..9 nc.78 at V GS = 4.5 V.7 FEATURES TrenchFET Power MOSFET % R g Tested

More information

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF610PbF SiHF610-E3 IRF610 SiHF610. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 200 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 00 R DS(on) ( ) = 1.5 Q g (Max.) (nc) 8. Q gs (nc) 1.8 Q gd (nc) 4.5 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

CMOS 5 V/+5 V 4 Single SPDT Switches ADG619/ADG620

CMOS 5 V/+5 V 4 Single SPDT Switches ADG619/ADG620 a FEATURE (Max) On Resistance. (Max) On Resistance Flatness.7 V to 5.5 ingle upply.7 V to 5.5 V ual upply Rail-to-Rail Operation -Lead OT-3 Package, -Lead MOP Package Typical Power Consumption (

More information

1 Form A Solid State Relay

1 Form A Solid State Relay 1 Form A Solid State Relay Vishay Semiconductors DIP i1791- SMD DESCRIPTION Vishay solid state relays (SSRs) are miniature, optically coupled relays with high-voltage MOSFET outputs. The LH1518 relays

More information

Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package

Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package Optocoupler, Phototransistor Output, 4 Pin LSOP, Long Creepage Mini-Flat Package FEATURES A 4 C Low profile package High collector emitter voltage, V CEO = 8 V 7295-6 DESCRIPTION The has a GaAs infrared

More information

Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO

Optocoupler, Phototransistor Output, with Base Connection, 300 V BV CEO SFH64 Optocoupler, Phototransistor Output, with Base Connection, 3 V BV CEO i1794-3 DESCRIPTION The SFH64 is an optocoupler with very high BV CER, a minimum of 3 V. It is intended for telecommunications

More information

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20

Power MOSFET FEATURES. IRF740PbF SiHF740-E3 IRF740 SiHF740. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 400 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 400 R DS(on) (Ω) = 0.55 Q g (Max.) (nc) 63 Q gs (nc) 9.0 Q gd (nc) 3 Configuration Single FEATURES Dynamic dv/dt Rating Repetitive Avalanche Rated Fast Switching Ease of

More information

Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay

Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay Photovoltaic MOSFET Driver with Integrated Fast Turn-Off, Solid-State Relay i7966_6 Turn Off FEATURES Open circuit voltage at I F = ma, 8. V typical Short circuit current at I F = ma, 5 μa typical Isolation

More information

Small Signal Fast Switching Diode

Small Signal Fast Switching Diode Small Signal Fast Switching Diode MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box 08/K per 7" reel (8 mm tape), K/box FEATURES Silicon epitaxial

More information

Power MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20

Power MOSFET. IRF510PbF SiHF510-E3 IRF510 SiHF510. PARAMETER SYMBOL LIMIT UNIT Drain-Source Voltage V DS 100 V Gate-Source Voltage V GS ± 20 Power MOSFET PRODUCT SUMMARY (V) 100 R DS(on) () = 0.54 Q g max. (nc) 8.3 Q gs (nc) 2.3 Q gd (nc) 3.8 Configuration Single D TO220AB G FEATURES Dynamic dv/dt rating Available Repetitive avalanche rated

More information

1 Form A Solid State Relay

1 Form A Solid State Relay Form A Solid State Relay VOAT, VOAABTR FEATURES 9 S S DC S' 3 S' High speed SSR - t on /t off < 8 μs Maximum R ON. Isolation test voltage 3 V RMS Load voltage V Load current A DC configuration DIP- package

More information

Standard Recovery Diodes, (Stud Version), 40 A

Standard Recovery Diodes, (Stud Version), 40 A Standard Recovery Diodes, (Stud ersion), 40 A S- FEATURES High surge current capability Stud cathode and stud anode version Leaded version available DO-203AB (DO-5) PRODUCT SUMMARY I F(A) 40 A Package

More information

MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches

MAX14760/MAX14762/MAX14764 Above- and Below-the-Rails Low-Leakage Analog Switches 19-652; Rev 1; 8/12 EVALUATION KIT AVAILABLE MAX1476// General Description The MAX1476// analog switches are capable of passing bipolar signals that are beyond their supply rails. These devices operate

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection 4N25, 4N26, 4N27, 4N28 Optocoupler, Phototransistor Output, FEATURES A 6 B Isolation test voltage 5000 V RMS Interfaces with common logic families C 2 5 C Input-output coupling capacitance < pf NC 3 4

More information

CMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736L

CMOS Low Voltage 2.5 Ω Dual SPDT Switch ADG736L CMO Low Voltage 2.5 Ω ual PT witch AG736L FEATURE 1.8 V to 5.5 V single supply 2.5 Ω (typical) on resistance Low on-resistance flatness Guaranteed leakage performance over 40 C to +85 C 3 db bandwidth

More information

Standard Recovery Diodes (Hockey PUK), 2100 A

Standard Recovery Diodes (Hockey PUK), 2100 A Standard Recovery Diodes (Hockey PUK), 2 A VS-SD10C..K Series DO-200AC (K-PUK) PRODUCT SUMMARY I F(AV) 2 A Package DO-200AC (K-PUK) Circuit configuration Single diode FEATURES Wide current range High voltage

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8583 BPW34 is a PIN photodiode with high speed and high radiant sensitivity in miniature, flat, top view, clear plastic package. It is sensitive to visible and near

More information

28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control

28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control 28 V, 56 m, Load Switch with Programmable Current Limit and Slew Rate Control OPERATION DESCRIPTION SiP32419 and SiP32429 are load switches that integrate multiple control features that simplify the design

More information

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches

Quad, Rail-to-Rail, Fault-Protected, SPST Analog Switches 19-2418; Rev ; 4/2 Quad, Rail-to-Rail, Fault-Protected, General Description The are quad, single-pole/single-throw (SPST), fault-protected analog switches. They are pin compatible with the industry-standard

More information

Optocoupler, Phototransistor Output, with Base Connection

Optocoupler, Phototransistor Output, with Base Connection CNY7 Optocoupler, Phototransistor FEATURES Isolation test voltage 5 V RMS A 6 B Long term stability i79 C NC 5 C E Industry standard dual-in-line package Lead (Pb-free component Component in accordance

More information

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS

Small Signal Fast Switching Diode FEATURES PART ORDERING CODE INTERNAL CONSTRUCTION TYPE MARKING REMARKS Small Signal Fast Switching Diode MARKING (example only) Bar = cathode marking XY = type code X Y 6 MECHANICAL DATA Case: SOD- Weight: approx.. mg Packaging codes/options: 8/K per " reel (8 mm tape), K/box

More information

PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications.

PI5A100. Precision, Wide-Bandwidth Quad SPDT Analog Switch. Description. Features. Block Diagram, Pin Configuration. Applications. Precision, Wide-Bandwidth Quad SPDT Analog Switch Features Single Supply Operation (+2V to +6V) Rail-to-Rail Analog Signal Dynamic Range Low On-Resistance (6Ω typ with 5V supply) Minimizes Distortion and

More information

Pulse Proof, High Power Thick Film Chip Resistors

Pulse Proof, High Power Thick Film Chip Resistors Pulse Proof, High Power Thick Film Chip Resistors STANDARD ELTRICAL SPIFICATIONS MODEL CASE SIZE INCH CASE SIZE METRIC POWER RATING P 70 W LIMITING ELEMENT VOLTAGE U max. AC/DC -HP e3 FTURES Excellent

More information

CMOS 1.8 V to 5.5 V, 2.5 2:1 Mux/SPDT Switch in SOT-23 ADG719

CMOS 1.8 V to 5.5 V, 2.5 2:1 Mux/SPDT Switch in SOT-23 ADG719 a FEATURE 1.8 V to 5.5 ingle upply 4 (Max) On Resistance.75 (Typ) On Resistance Flatness Automotive Temperature Range: 4 C to +125 C 3 db Bandwidth > 2 MHz Rail-to-Rail Operation 6-Lead OT-23 Package and

More information

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package

Optocoupler, Photodarlington Output, Dual Channel, SOIC-8 Package Optocoupler, Photodarlington Output, i179042 DESCRIPTION A1 C 2 A3 C4 8 C 7E 6C 5E The ILD233T is a high current transfer ratio (CTR) optocoupler. It has a gallium arsenide infrared LED emitter and silicon

More information

Silicon PIN Photodiode

Silicon PIN Photodiode VEMD940F Silicon PIN Photodiode DESCRIPTION VEMD940F is a high speed and high sensitive PIN photodiode in a miniature side looking, surface mount package (SMD) with daylight blocking filter. Filter is

More information

Precision Monolithic Quad SPST CMOS Analog Switches

Precision Monolithic Quad SPST CMOS Analog Switches G4HS, G42HS, G43HS Precision Monolithic Quad SPST MOS Analog Switches ESRIPTION The G4HS series of monolithic quad analog switches was designed to provide high speed, low error switching of precision analog

More information

Silicon PIN Photodiode

Silicon PIN Photodiode Silicon PIN Photodiode DESCRIPTION 94 8632 is a PIN photodiode with high speed and high radiant sensitivity in a clear, side view plastic package. It is sensitive to visible and near infrared radiation.

More information

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal

SuperTan Extended (STE) Capacitors, Wet Tantalum Capacitors with Hermetic Seal SuperTan Extended () Capacitors, Wet Tantalum Capacitors with Hermetic Seal FEATURES SuperTan Extended () represents a major breakthrough in wet tantalum capacitor Available technology. Its unique cathode

More information

High Performance Schottky Rectifier, 3.0 A

High Performance Schottky Rectifier, 3.0 A High Performance Schottky Rectifier, 3. A Cathode Anode SMC PRODUCT SUMMARY Package SMC I F(AV) 3. A V R 4 V V F at I F.46 V I RM 3 ma at 25 C T J max. 5 C Diode variation Single die E AS 6. mj FEATURES

More information

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.

1.5KE6.8A thru 1.5KE540A, 1N6267A thru 1N6303A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay. TRANSZORB Transient Voltage Suppressors Case Style.5KE FEATURES Glass passivated chip junction Available in uni-directional and bi-directional 500 W peak pulse power capability with a /0 μs waveform, repetitive

More information

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS

P6KE6.8A thru P6KE540A. TRANSZORB Transient Voltage Suppressors. Vishay General Semiconductor. www.vishay.com FEATURES PRIMARY CHARACTERISTICS TRANSZORB Transient Voltage Suppressors DO-204AC (DO-15) PRIMARY CHARACTERISTICS V WM 5.8 V to 459 V V BR uni-directional 6.8 V to 540 V V BR bi-directional 6.8 V to 440 V P PPM 600 W P D 5.0 W I FSM (uni-directional

More information

Optocoupler, Phototransistor Output, AC Input

Optocoupler, Phototransistor Output, AC Input Optocoupler, Phototransistor Output, AC Input DESCRIPTION The SFH62A (DIP) and SFH626 (SMD) feature a high current transfer ratio, low coupling capacitance and high isolation voltage. These couplers have

More information

Schottky Rectifier, 1.0 A

Schottky Rectifier, 1.0 A Schottky Rectifier, 1.0 A VS-BQ040-M3 Cathode Anode PRODUCT SUMMARY Package SMB I F(AV) 1.0 A V R 40 V V F at I F 0.38 V I RM 9 ma at 125 C T J max. 150 C Diode variation Single die E AS 3.0 mj FEATURES

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs

High Power Infrared Emitting Diode, 940 nm, GaAlAs/GaAs TSAL64 High Power Infrared Emitting Diode, 94 nm, GaAlAs/GaAs DESCRIPTION 94 8389 TSAL64 is an infrared, 94 nm emitting diode in GaAlAs/GaAs technology with high radiant power molded in a blue-gray plastic

More information

High Performance Schottky Rectifier, 1.0 A

High Performance Schottky Rectifier, 1.0 A High Performance Schottky Rectifier, 1. A VS-BQ3-M3 Cathode Anode SMB PRODUCT SUMMARY Package SMB I F(AV) 1. A V R 3 V V F at I F.42 V I RM max. 15 ma at 125 C T J max. 15 C Diode variation Single die

More information

Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR

Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Solid Tantalum Surface Mount Capacitors TANTAMOUNT, Molded Case, Low ESR Effective September 2005, new capacitor ratings will not be added to the series. All new ratings are available in the TR3 series.

More information

High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW

High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW High Speed Infrared Emitting Diode, 940 nm, GaAlAs, MQW DESCRIPTION is an infrared, 940 nm side looking emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed,

More information

Automotive P-Channel 60 V (D-S) 175 C MOSFET

Automotive P-Channel 60 V (D-S) 175 C MOSFET Automotive P-Channel 6 V (D-S) 75 C MOSFET SQ36AEES PRODUCT SUMMARY V DS (V) -6 R DS(on) () at V GS = - V 7 R DS(on) () at V GS = -4.5 V.3 I D (A) -.9 Configuration Single D 3 SOT-3 (TO-36) G Top View

More information

Silicon NPN Phototransistor

Silicon NPN Phototransistor Silicon NPN Phototransistor DESCRIPTION 7 is a silicon NPN phototransistor with high radiant sensitivity in black, T-1¾ plastic package with base terminal and daylight blocking filter. Filter bandwidth

More information

Reflective Optical Sensor with Transistor Output

Reflective Optical Sensor with Transistor Output TCRT5000, TCRT5000L Reflective Optical Sensor with Transistor Output FEATURES Package type: leaded Detector type: phototransistor Dimensions (L x W x H in mm): 10.2 x 5.8 x 7 Peak operating distance: 2.5

More information

Dual P-Channel 40 V (D-S) MOSFET

Dual P-Channel 40 V (D-S) MOSFET Si7905DN Dual P-Channel 0 V (D-S) MOSFET PRODUCT SUMMARY V DS (V) R DS(on) ( ) I D (A) Q g (Typ.) - 0 0.060 at V GS = - 0 V - 6 e nc 0.089 at V GS = -.5V - 5 f FEATURES Halogen-free According to IEC 69--

More information

Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring

Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring Aluminum Electrolytic Capacitors Power Eurodin Printed Wiring 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION VALUE 00 0 Nominal case size (Ø D x L in mm) x 0 to 0 x 00 Rated capacitance range 0 μf to

More information

SMD PTC - Nickel Thin Film Linear Thermistors

SMD PTC - Nickel Thin Film Linear Thermistors SMD PTC - Nickel Thin Film Linear Thermistors Notes (1) Contact if closer TCR lot tolerance is desired. (2) Other R 25 -values and tolerances are available upon request. (3) Rated continuous working voltage

More information

High Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW

High Power Infrared Emitting Diode, 940 nm, GaAlAs, MQW High Power Infrared Emitting Diode, 94 nm, GaAlAs, MQW DESCRIPTION 94 8389 is an infrared, 94 nm emitting diode in GaAlAs multi quantum well (MQW) technology with high radiant power and high speed molded

More information

SMD Aluminum Solid Capacitors with Conductive Polymer

SMD Aluminum Solid Capacitors with Conductive Polymer SMD Aluminum Solid Capacitors with Conductive Polymer FEATURES New OS-CON series provides improved characteristics with up to 25 C temperature capability and 35 V maximum voltage rating in a SMD package

More information

Dual-Host / Dual-SIM Card Crosspoint Analog Switch

Dual-Host / Dual-SIM Card Crosspoint Analog Switch FSA2866 Dual-Host / Dual-SIM Card Crosspoint Analog Switch Features Switch Type 2x2 Crosspoint Switch Input Type Data Input Signal Range 0 to V CC V CC 1.65V to 4.30V R ON Data 2Ω (Typical) VSIM 2Ω (Typical)

More information

TSM2N7002K 60V N-Channel MOSFET

TSM2N7002K 60V N-Channel MOSFET SOT-23 SOT-323 Pin Definition: 1. Gate 2. Source 3. Drain PRODUCT SUMMARY V DS (V) R DS(on) (Ω) I D (ma) 5 @ V GS = 10V 100 60 5.5 @ V GS = 5V 100 Features Low On-Resistance ESD Protection High Speed Switching

More information

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL

Metal Film Resistors, Military, MIL-R-10509 Qualified, Precision, Type RN and MIL-PRF-22684 Qualified, Type RL Metal Film Resistors, Military, Qualified, Precision, Type RN and Qualified, Type RL FEATURES Very low noise (- 40 db) Very low voltage coefficient (5 ppm/v) Controlled temperature coefficient Flame retardant

More information

Aluminum Electrolytic Capacitors Power Economic Printed Wiring

Aluminum Electrolytic Capacitors Power Economic Printed Wiring Aluminum Electrolytic Capacitors Power Economic Printed Wiring 0/0 PECPW 00/0 PEDPW Fig. QUICK REFERENCE DATA DESCRIPTION high ripple current 0/0 PECPW long life 0 C Nominal case size (Ø D x L in mm) Rated

More information

Load Switch with Level-Shift

Load Switch with Level-Shift Load Switch with Level-Shift PRODUCT SUMMARY V IN (V DS2 ) (V) R DS(on) (Ω) I D (A).5 to 2 DESCRIPTION.54 at V IN = 4.5 V 3.9.77 at V IN = 2.5 V 3.2.6 at V IN =.8 V 2.8.65 at V IN =.5 V 2.2 The includes

More information

Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package

Optocoupler, Phototransistor Output, with Base Connection in SOIC-8 Package Optocoupler, Phototransistor Output, FEATURES High BV CEO, 70 V Vishay Semiconductors i79002 A K NC NC 2 3 4 8 7 6 5 NC B C E Isolation test voltage, 4000 V RMS Industry standard SOIC-8A surface mountable

More information

NTC Thermistors, Radial Leaded and Coated

NTC Thermistors, Radial Leaded and Coated M, C, T NTC Thermistors, Radial Leaded and Coated FEATURES Small size - conformally coated Wide resistance range Available in 11 different R-T curves Available in point matched and curve tracking precision

More information

Low Current SMD LED PLCC-2

Low Current SMD LED PLCC-2 Low Current SMD LED PLCC-2 VLMC31. 19225 DESCRIPTION These new devices have been designed to meet the increasing demand for low current SMD LEDs. The package of the VLMC31. is the PLCC-2 (equivalent to

More information

High Ohmic/High Voltage Metal Glaze Leaded Resistors

High Ohmic/High Voltage Metal Glaze Leaded Resistors High Ohmic/High Voltage Metal Glaze Leaded Resistors FEATURES Technology: Metal glaze A metal glazed film is deposited on a high grade ceramic body. After a helical groove has been cut in the resistive

More information

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications

Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications Surface Mount Multilayer Ceramic Chip Capacitor Solutions for High Voltage Applications ELECTRICAL SPECIFICATIONS X7R GENERAL SPECIFICATION Note Electrical characteristics at +25 C unless otherwise specified

More information

N-Channel 20-V (D-S) 175 C MOSFET

N-Channel 20-V (D-S) 175 C MOSFET N-Channel -V (D-S) 75 C MOSFET SUD7N-4P PRODUCT SUMMARY V DS (V) r DS(on) ( ) (A) a.37 @ V GS = V 37.6 @ V GS = 4.5 V 9 TO-5 D FEATURES TrenchFET Power MOSFET 75 C Junction Temperature PWM Optimized for

More information