Installation Guide PSP Installation. Rev SRP-350plusII SRP-352plusII.

Transcription

1 Installation Guide PSP Installation Rev SRP-350plusII SRP-352plusII

2 Table of Contents 1. Manual Information Operating Environment Installation Environment Operating Environment Supported Interface Installing and Deleting Installation Uninstallation Port Setting Wizard Automatic Installation for Serial / Parallel / USB Ethernet Automatic Installation Manual Installation Default Value Installation Running PSP Launch Caution...15 Rev

3 1. Manual Information This manual provides the information for installing PSP (POS Software Package) software of BIXOLON. You can use Windows Driver, OPOS Driver, JavaPOS Driver, Linux Driver, Virtual Com Driver, and various utility software provided by SRP-350plusII/352plusII using this software. Terms are defined as follows in this manual. - OPOS: OLE for Retail Point of Sale - JavaPOS: Java Point of Sale - JDK: Sun Microsystems Java Development Kit - JRE: Sun Microsystems Java Runtime Environment [Reference Sites] OLE for Retail POS Committee Java POS Committee Java Official Home Page Driver Update We at BIXOLON maintain ongoing efforts to enhance and upgrade the functions and quality of all our products. In following, product specifications and/or user manual content may be changed without prior notice. Rev

4 2. Operating Environment 2-1 Installation Environment This software can be installed on the following operating systems. - Windows Windows XP (32bits/64bits) - Windows 2003 Server (32bits/64bits) - Windows 2008 Server (32bits/64bits) - Windows VISTA (32bits/64bits) - Windows 7 (32bits/64bits) 2-2 Operating Environment Operating environments for each Driver and Utility are as follows. Classification Windows 2000 Windows XP (32bits) Windows 2003 (32bits) Windows Vista (32bits) Windows 7 (32bits) Windows XP (64bits) Windows 2003 (64bits) Windows Vista (64bits) Windows 7 (64bits) Linux Kernel Windows Driver OPOS Driver JPOS Driver Linux Driver Virtual Com Driver Utilities O O O X O O O O O X O O O O O X O O O O O X O O O O O X O O O O X X X O O O X X X O O O X X X O O O X X X O X X X O O X * Java environment of JPOS Driver is JRE (Java Runtime Environment) Version 1.5 or higher. * Linux Drivers supports Kernel Version or higher. 2-3 Supported Interface This product can be used with the following interfaces. - Serial (RS232) - Parallel - USB - Ethernet Rev

5 3. Installing and Deleting BIXOLON PSP includes Windows Driver, OPOS Driver, JavaPOS Driver, Linux Driver, Virtual Com Driver, PSP Launcher, and Utility. 3-1 Installation 1) Execute SRP350plusIIPSPInstall Vx.x.x. 2) Welcome dialogue box will be displayed. 3) Agree the software license. BIXOLON considers that you agree to the license when you install this software. Rev

6 4) Select the installation elements. Default installation location is as follows. C:\Program Files\BIXOLON\SRP350plusIIPSP\ * Utilities is a mandatory installation element. 5) Installation preparation window will appear. Rev

7 6) Installation progress will be displayed. 7) Additional installation procedures will be carried out depending on the selection of installation elements. * If Windows Driver is selected, Port Setting Wizard will be invoked during the installation process. Refer to the next chapter for more details. Rev

8 3-2 Uninstallation You can select the SRP-350plusII POS Software Package from the Add/Remove Programs in the Control Panel or use BIXOLON\SRP-350plusII POS Software Package \Uninstaller in the Start Program Menu to remove the software. 1) Click the Start Menu->All Programs->BIXOLON->SRP-350plusII POS Software Package ->Uninstaller. 2) After choosing the Remove button, Click Next button to start the deleting process. * If the Windows Driver was installed, Windows Driver Uninstaller will be invoked during the uninstallation process. Rev

9 4. Port Setting Wizard You can configure the port settings and install or add Windows Driver with the configured port settings using Port Setting Wizard. You can choose Automatic/Manual/Default Value Installation depending on the installation method. 4-1 Automatic Installation for Serial / Parallel / USB 1) Connect the printer to the computer, and turn on the power. 2) Select Serial/Parallel/USB Auto Search and Configuration from the Port Setting Wizard Step 1. 3) Click the Next button and printer searching will start. * Port searching ranges are as follows. - Serial: COM1~COM9 - Parallel: LPT1~LPT4 - USB: Plug&play Rev

10 4) When the port searching is completed, select the corresponding printer in the Search Result and click the Next button. 5) Check the selected printer. You can execute test printing using Test Print button. 6) Click the Next button, and the Windows Driver installation will continue with the configured port settings. Rev

11 4-2 Ethernet Automatic Installation 1) Connect the printer to the computer, and turn on the power. 2) Select the Ethernet Auto Search and Configuration from Port Setting Wizard Step 1. 3) Click the Next, then the printer searching will start. * When the warning window shown above pops up, click Unblock button to allow searching. Rev

12 4) When port searching is completed, select the corresponding printer from the Search Result, set the network information of the printer, and click the Set button. Click the Next button when re-searching is completed and when the network information of the selected printer is correct. 5) Check the selected printer. You can execute printing with the Test Print button. 6) Click the Next button and the Windows Driver installation with the configured port settings will continue. Rev

13 4-3 Manual Installation 1) Connect the printer to the computer and turn on the power. 2) Select Manual Select and Configuration from Port Setting Wizard Step 1. 3) Click the Next button to move to the port setting step. Configure the port settings of the corresponding printer. 4) Click the Next button. The procedures after this step are the same as the automatic installation. Rev

14 4-4 Default Value Installation 1) Select Default Configuration from the Port Setting Wizard Step 1. 2) Click the Next button. Procedures after this step are the same as the automatic installation. * Default value setting information - Port: COM1 - Baudrate: Bit Length: 8 - Parity: None - Stop bits: 1 - Flow Control: Hardware Rev

15 5. Running PSP Launch You can set/execute the installed driver and utility using the PSP Launch software. You can find the program in the following location. Start Menu->All Programs > BIXOLON > SRP-350plusII POS Software Package > PSP Launcher * Refer to PSP Launch Manual for the instructions on using the program. (Start Menu > All Programs > BIXOLON > SRP-350plusII POS Software Package > Manual ) 6. Caution The installed BIXOLON SRP-350plusII PSP supports devices provided by BIXOLON. The normal operation of the installed software with other devices is not guaranteed. Rev