MOS 3330 Test 1 Review Problems & Solutions
|
|
- Christiana Booth
- 8 years ago
- Views:
Transcription
1 MOS 3330 Test 1 Review Problems & Solutions General Information Test date, time, location: See the course outline See also the course web site: dan.uwo.ca/courses/3330 Test time conflict (due to having a Wed. evening class) must report to the instructor no later than one week before the test date Exam conflict consists of having 3 exams within 23 hours Missing the test check the course web site for instruction Test coverage: The coverage is based on the lecture notes, not the textbook. o Introduction to Operations Management o Supply chain management o Inventory management o Forecasting Test structure: Test 1 is worth 25% of your course grade Test 1 = total 60 marks o Question 1 Computational, 4 parts, total 16 marks o Question 2 Short answers, 2 questions (conceptual, no calculation), 7 marks each, total 14 marks o Question 3 Multiple choice, 30 questions (concepts and simple calculations), 1 mark each, total 30 marks o Formula sheet provided on the last page of the test (you can get an exact copy from the course web site prior to the test) Don t forget to bring to test: Student ID Non-programmable calculator Pencils for multiple choice scantron sheet No cell phones on person or on desk during the test No personal scrap paper 1
2 A. Computational General Tips Recommended steps for how to prepare for computational questions in Test 1: 1. Review computational examples in the lecture notes. Understand input and output numbers for each formula. Understand when to use each formula/model. The test questions will not specify which formula/model to use; you have to identify which one to use based on information given (i.e., numerical data, the context of the question, and what the question is asking for). The test questions may also contain unneeded numbers; you have to identify which number should be included or omitted in your calculation. 2. Download the formula sheet from the course web site. Familiarize yourself with what is on the sheet. Formula sheet is for the entire course; Test 1 covers the top ¹ ₃ of the formula sheet. Symbols are not defined on the formula sheet; you should know what the symbols stand for as part of your understanding (e.g., you should know that TC in Inventory Management stands for Total Cost.) 3. Study end-of-chapter problems in the textbook. Practice how to carry out calculations using different formulas and models. Familiarize yourself with typical input numbers and typical phrases that describe the context of the question. You don t have to do all problems in the textbook; see A1 below for suggested problems. 4. Study questions from the old exams. See A2 below. Notes on Rounding In most cases, just use normal rounding. For example, should be rounded down to 32, and should be rounded up to 48, if the final answer has to be an integer. For a physical quantity (e.g., order quantity), the final answer should be an integer. For a dollar amount, the final answer should have two decimal points (e.g., if the calculated total cost is $ , then the final answer is $ ). For all intermediate calculations, use the decimal numbers before rounding (2 or 3 decimal places will suffice). For example, one question asks you to calculate EOQ and the total cost. Let s say that EOQ = Then will be rounded down to 32 in your final statement of what the order quantity is. In order to calculate the total cost, however, use (not 32) in the TC formula because it will give you a more precise answer. 2
3 A1. Textbook Computational Problems Topic Inventory Management Suggested textbook end-of-chapter problems #9 #11 #13 Use holding cost of $5/bag/year throughout this question; see the alternate solution provided in this review document #14 Use holding cost of $5/bag/year throughout this question; see the alternate solution provided in this review document #17 #22 Assume Q system #23 (b) Holding cost given is $0.55 per bag, but what you need is the holding cost per pound; also in (b), textbook calculates total cost differently from the lecture notes, but the answer is the same either way. For the test, STICK TO THE LECTURE NOTES FORMULAS. #25 (a) Holding cost given is $3 per bag, but what you need is the holding cost per pound; (b) textbook calculates total cost differently from the lecture notes, but the answer is the same either way. For the test, STICK TO THE LECTURE NOTES FORMULAS. Forecasting #3 #5 Use F 1 = D 1 to start calculation for exponential smoothing #6 Use F 1 = D 1 to start calculation for exponential smoothing #9 Solve the problem by the method shown in the lecture notes; see the alternate solution provided in this review document #14 Solve the problem by the method shown in the lecture notes; see the alternate solution provided in this review document #19 #21 Also use MAPD and CE to compare two methods; see the alternate solution provided in this review document A2. Computational Questions from Old Exams 1. You are given the following partial demand and forecast data for a product: Quarter (t): Forecast (F t): Demand (D t): a) Compute a 3-quarter simple moving average forecast for quarter 7. b) The actual demand for quarter 7 turned out to be Compute an exponentially smoothed forecast for quarter 8 with α = Use the forecast for quarter 7 from part a). c) Observing the actual demands for quarters 4 through 7, you are thinking about updating the value of α in part b). Would you choose a smaller or larger value than 0.15? Justify your answer briefly. d) For the forecasts given in part a) (quarters 4 to 6) and the forecast computed in a) (quarter 7), compute a measure of bias error. Is there any bias, and if so, has the forecast been biased low or high? 3
4 e) The product turns out to be popular homemade-style ice cream made in a small plant. The complete demand data for years 1, 2, and 3 are given below. Compute the forecast for each of quarters in year 4, given that the forecast for the total demand in year 4 is 2980 gallons. Quarterly demand (in gallons) Year Quarter 1 Quarter 2 Quarter 3 Quarter The University Gift Shop purchases sweatshirts emblazoned with the school name and logo from a vendor in Toronto. The vendor sells the sweatshirts to the Gift Shop for $34.99 apiece. Shipping from Toronto to London costs $110 per order. When an order arrives, it has been estimated that receiving and inspection tasks cost the Gift Shop $25. The annual holding cost for a sweatshirt is calculated as 11% of the purchase cost. The Gift Shop manager estimates that 3100 sweatshirts will be sold during the upcoming academic year. a) Determine the optimal order quantity using the basic EOQ model. b) The vendor has recently offered a 3% discount on the purchase price if the Gift Shop orders 500 or more but less than 2000 at a time, and a 5% discount if the Shop orders 2000 or more at a time. Would you take up one of these offers? If so, what is the new optimal order quantity, and if not, why not? Use the same holding cost from part a) throughout this question. c) Based on your answer in part b), how many orders will there be in a year? What is the annual average inventory level? d) Based on your answer in part b), what is the reorder point if the lead time is 3 business days? Assume that there are 260 business days a year. e) In parts a) and b), one type of the main inventory management costs has not been included in calculating the optimal order quantity. What is it and why has it been left out? 3. Big Value Supermarket stocks Crunchies Cereal. The demand for Crunchies was 10,200 boxes in year 6. The demand forecast for year 7 is calculated using exponential smoothing with α = 0.12 (the forecast for year 6 was 9500 boxes). It costs Big Value $80 per order of Crunchies and $0.85 per box annually to keep the cereal in storage. The store manager wants to know what the optimal inventory management policy is for Crunchies in year 7. Determine the optimal policy and describe it based on a periodic review system. What is the total cost associated with the optimal policy, and what is the average inventory level of Crunchies? Assume that Big Value operates 365 days per year. 4. ABC Computers assembles microcomputers from generic components. It purchases its colour monitors from a manufacturer in Taiwan with a lead time of 21 days. Daily demand for monitors is normally distributed with a mean of 3.5 monitors and a standard deviation of 1.7 monitors. ABC has determined that the ordering cost is $325 per order, the annual holding cost is $25 per monitor, and the stockout cost is $450 per lost sale. Currently ABC calculates the safety stock level for monitors based on a 90% service level. If ABC is willing to spend 50% more on managing safety stock, what service level could be achieved? The number of standard deviations is 1.28 for 90% service level, 1.65 for 95%, 2.05 for 98%, and 2.33 for 99%. ABC uses a continuous review system. 4
5 5. The manager of Petro North gasoline service station wants to forecast the demand for unleaded gasoline next month so that the proper number of gallons can be ordered from the distributor. The manager has accumulated the sales data and forecast accuracy measures during the past 10 months, which are shown in the table below. Fill all blank spaces in the table labeled a through f. Month 3-month Simple Sales MAD MAPD MSE CE Moving Average (in gallons) Feb N/A 1130 N/A N/A N/A N/A Mar N/A 1360 N/A N/A N/A N/A Apr N/A 1440 N/A N/A N/A N/A May b Jun d Jul e Aug c Sep Oct a f Nov Richmond Street Microbrewery makes Western Beer, which it bottles and sells in its adjoining pub/restaurant and by the case. It costs $1100 to set up, brew and bottle a batch of the beer. The annual cost to store the beer is $2.75 per bottle. The annual demand for the beer is 16,000 bottles and the brewery has the capacity to produce 28,000 bottles annually. The current production policy is to continue producing the beer until the storage gets full. The storage holds a maximum of 750 bottles of beer. Production starts again when the inventory of beer is depleted. The owners of the brewery are considering an option of increasing the beer storage space to hold a maximum of 3000 bottles as part of their expansion strategy for the next five years. Is this a good option in terms of the cost savings? Why or why not? Comment also on the current policy of producing the beer until the storage is full. What would be an optimal production policy for the brewery? Lastly, determine how many production days are required for the optimal production policy (assume one year = 365 days). 7. The following table shows demand and forecast data for a product in number of units. Period Demand Forecast a) Select and compute appropriate measures of forecast error. Give an interpretation for each of the error measure value. Based on your interpretation, how would you improve the future forecast in general? b) Your friend, Norman Bates, calculated F 6 from the data above, and told you that F 6 is 165. Could he have used a 3-period weighted moving average to obtain his F 6? Justify your answer briefly. c) You are considering using exponential smoothing or simple moving average to calculate F 6. Norman tells you that exponential smoothing only includes the most recent demand and ignores earlier demands, so simple moving average is better. Is his right? Justify your answer briefly. 5
6 B. Multiple Choice General Tips Recommended steps for how to prepare for multiple choice questions in Test 1: 1. Focus on the lecture notes. All multiple choice questions are based on the lecture notes. Be able to define/explain all terms and concepts contained in the lecture notes. If you are not sure about a term or concept, make a note of that and look it up in the textbook later (see Step 2). 2. Read the textbook chapters that correspond to the test coverage. DO NOT read the textbook unless you are clear about what is in the lecture notes. Take notes only on the materials covered in the lecture notes. Take notes on terms/concepts that you were not sure about in the lecture notes. Read quickly through the terms/concepts that are not in the lecture notes (don t take any notes). 3. Study questions from the old exams. See B1 below. 4. You may also study web quizzes provided on the textbook web site. Go to Look for Browse by Resource menu. Click on Web Quizzes. Skip the question if it is about the concept that is not in our lecture notes. B1. Multiple Choice Questions from Old Exams 1) Service level of 95% means that a. the service goal is to meet 95% of annual demand b. the service goal is to meet 95% of demand during lead time c. there is a 95% chance that 95% of demand during lead time will be met d. there is a 95% chance that all of demand during lead time will be met 2) In ABC inventory classification system, class A items may a. require higher safety stock b. require frequent deliveries c. require a periodic inventory system d. require batch updating of inventory records 3) The simple moving average technique a. works better for long-range forecasts than short-range forecasts when large N is used b. reacts well to random variations c. reacts well to variations that occur for a reason d. requires minimal amount of data 6
7 4) An advantage of P system over Q system may be a. small inventory b. large inventory c. accurate inventory control d. low inventory control cost 5) Which of the following is true concerning the smoothing parameter (α) used in exponential smoothing? a. α = 0.4 means the forecast for the next period is based on 40% older data and 60% recent data. b. If α = 0, the forecast is equivalent to the naive forecast. c. The higher the value of α, the less the effect of smoothing. d. The higher the value of α, the more the effect of smoothing. 6) For a company that uses a continuous review inventory system, which of the following is true? a. The order interval is fixed. b. The order interval may vary with each order. c. The order quantity and the order interval are fixed. d. The order quantity may vary with each order. 7) Suppose that the EOQ for an inventory problem was first calculated to be Q*. Then you found out that the ordering cost would be lower than anticipated. Without recalculating the EOQ, what can you say about the relationship between the new Q* (= Q* new) and the original Q*? a. Q* = Q* new b. Q* < Q* new c. Q* > Q* new d. Inconclusive without knowing how much the ordering cost decreased 8) Among the following, the most suitable forecasting method when a trend exists is a. simple moving average with large N b. weighted moving average with a large weight on the most recent demand c. exponential smoothing with small α d. adjusted exponential smoothing with small α and small β 9) Quantitative and qualitative forecasting methods a. may produce conflicting results b. require historical data c. are mostly used for short- to medium-range forecasts d. cannot be used together 10) Inventory holding cost may include a. material purchase cost b. interest on loans c. penalty charge if demand is not met d. inspection of incoming supplies at warehouses 11) Given demands, D 1 = 20, D 2 = 16, and D 3 = 12, what is F 5 using the naive forecasting method? a. F 5 = 8 b. F 5 = 12 c. F 5 = 16 d. Inconclusive from the given data 12) In the EPQ model, which EOQ assumption does no longer hold? a. Lead time is constant b. Demand is constant c. Items are received all at once d. Supply is certain 7
8 13) A company has two sets of demand forecasts, one for the basic model and the other for the luxury model. The basic model forecast consists of dollar values under 500 and the luxury model forecast consists of values over If the company currently uses one forecasting method for both basic and luxury models, which forecast error should be used to assess the accuracy of the forecast method? a. MAD b. MAPD c. MSE d. CE 14) Considering a steak-house restaurant as an operations system, which of the following would not generally be used to describe the transformation process? a. Physical b. Locational c. Exchange d. Psychological 15) Which of the following is true about Operations Management? a. In order to create a stable and efficient working environment, Operations should be kept in isolation from outside influences such as customers. b. Since service organizations do not produce a product, the principles of inventory management do not apply. c. Operations managers are involved in managing people, processes and products. d. Operations managers are concerned about how to finance new equipment. 16) Large batch size orders a. are easier for the supplier to manage b. are more costly for the supplier c. decrease the customer s inventory levels d. increase the customer s flexibility to deal with sudden market changes 17) Which of the following does not contribute to uncertainty in the supply chain? a. demand forecasting b. inventory c. batch ordering d. price fluctuations 18) Vendor managed inventory means that a. vendors generate forecasts b. vendors often receive data electronically c. vendors take advantage of the distributor s expertise d. vendors produce and deliver products to their customers 19) When a company withholds customization of its final products as long as possible, this is an example of a. postponement b. delayed warehousing c. extended storage d. cross docking 20) Which forecasting method suffers from the possibility of having one person s opinion dominate the forecast? a. Market research b. Executive opinion c. Simple moving average d. Näive method 21) Which companies are more likely to use 3PL services to handle most of their logistics needs? a. Transportation companies b. Warehousing companies c. Hospital equipment manufacturers d. Companies engaged in international business 8
9 C. Short Answers General Tips Recommended steps for how to prepare for short answer questions in Test 1: 1. Study the lecture notes. For short answer questions, the justification of your answer starts from the understanding of terms and concepts covered in the lecture notes. Be able to define/explain all terms and concepts contained in the lecture notes. Keep in mind that, if you study the lecture notes for multiple choice questions, then you are studying for short answers at the same time! 2. Read the textbook chapters that correspond to the test coverage. DO NOT read the textbook unless you are clear about what is in the lecture notes. Take notes only on the materials covered in the lecture notes. For short answers, take notes on different examples and alternate explanations, which can help you with the building of your justification. In regard to the terms/concepts that are not in the lecture notes but are in the textbook, reading through them once is recommended for short answers because it provides you with a broad perspective, which is helpful for building your justification. 3. Study end-of-chapter discussion questions from the textbook. You don t have to do all questions in the textbook; see C1 below for suggested problems. 4. Study questions from the old exams. See C2 below. A short answer question may ask you: To apply a concept covered in the lecture notes to a real-world setting. Whether or not a strategy/method/model is a good idea for a particular organization. To choose among different strategies/methods/models for a particular organization. To suggest improvement for various operational issues. To provide a real-world example of a concept. Do s and Don ts: Do demonstrate the basic understanding of concepts covered in the course. Do provide a sound and comprehensive justification/explanation that fits the context of the question. Do answer the question as directly as possible (read the question carefully!). Don t include irrelevant ideas. Don t go off at a tangent. Don t repeat/rephrase the same points. 9
10 C1. Textbook Discussion Questions Topic Suggested end-of-chapter discussion questions Intro to OM #1, 2, 3, 4, 8 Supply Chain Management #10, 11 + Case: DIMCO #1 Inventory Management #2, 3, 7, 8, 9, 10, 11, 13, 15, 16, 18, 19 Forecasting #3, 4, 5, 6, 8, 9 + Case: Bram-Wear #1 C2. Short Answer Questions from Old Exams 1. How could a convenience store like 7-Eleven or Mac s, which sells a variety of goods (snack foods, drinks, lottery tickets, sun tan lotions, etc.), implement the ABC system? Explain how you would categorize store items (give examples) and what type of inventory management policy you would use for each category. 2. Name a competitive strategy that Canadian Tire could use to manage its supply chain. Justify your answer briefly. Your answer will be graded based on the validity of your justification, not for what Canadian Tire may actually do. 3. For a grape farm in Southern California, which quantitative method would be appropriate for forecasting its demand and how would you select the values of parameters in those methods? Make sure to explain why you would choose certain methods and certain parameter values. 10
11 Solutions A1. Textbook Computational Problems Inv, #9 Appendix A (look for chapter 3 answers) Inv, #11 Appendix A (look for chapter 3 answers) Inv, #13 Alternate solution: Basic EOQ = [2(1560)(10)/5] ½ ; not qualified for the lowest purchase price TC@$19 = 10(1560/78.99) + 5(78.99/2) + 19(1560) = $ TC@$18 = 10(1560/100) + 5(100/2) + 18(1560) = $ ; the optimal quantity is 100 Inv, #14 Alternate solution: Basic EOQ = [2(1560)(10)/5] ½ ; not qualified for the lowest purchase price TC@$19 = 10(1560/78.99) + 5(78.99/2) + 19(1560) = $ TC@$18 = 10(1560/100) + 5(100/2) + 18(1560) = $ TC@$16 = 10{1560/[(1560/12) 3]} + 5(390/2) + 16(1560) = $ TC@$14.50 = 10{1560/[(1560/12) 6]} + 5(780/2) (1560) = $ ; the optimal quantity is 780 Inv, #17 Appendix A (look for chapter 3 answers) Inv, #22 (a) EOQ = (b) R = dl + zσ d(l) ½ = (8)(2) + (1.88)(3)(2) ½ = rolls (c) SS = zσ d(l) ½ = rolls (d) R = rolls (e) SS = rolls Inv, #23 Appendix A (look for chapter 3 answers) (b) Note that the textbook provides an alternative way of calculating total cost; if you use the formula from the lecture notes, the final solution should be the same Inv, #25 Appendix A (look for chapter 3 answers) (b) Note that the textbook provides an alternative way of calculating total cost; if you use the formula from the lecture notes, the final solution should be the same Fcst, #3 Appendix A (look for chapter 4 answers) Fcst, #5 Appendix A (look for chapter 4 answers) Fcst, #6 (a) α = 0.1: F 1 = 430, F 2 = 430, F 3 = 415.9, F 4 = , F 5 = , F 6 = , MAD = 71.4; α = 0.7: F 1 = 430, F 2 = 430, F 3 = 331.3, F 4 = , F 5 = , F 6 = , MAD = (b) the answer is the same, α = 0.1 is better; both data sets do not exhibit a trend and the variation in the data appears to be random Fcst, #9 Alternate solution: D Fall = = 430, D Winter = 3000, D Spring = 1100, D Summer = 1551; ΣD i = 6081 S Fall = 430/6081 = 0.07, S Winter = 0.49, S Spring = 0.18, S Summer = 0.26 F Year3,Fall = = 280, F Year3,Winter = 1960, F Year3,Spring = 720, F Year3,Summer = 1040 Fcst, #14 Alternate solution: D Fall = = 743, D Winter = 368, D Spring = 1007, D Summer = 666; ΣD i = 2784 S Fall = 743/2784 = 0.27, S Winter = 0.13, S Spring = 0.36, S Summer = 0.24 F Year3,Fall = = , F Year3,Winter 198, F Year3,Spring = 549, F Year3,Summer = 366 Fcst, #19 Appendix A (look for chapter 4 answers) 11
12 Fcst, #21 Alternate solution: MAD 1 = ( )/6 = 31/6 = 5.167, MAPD 1 = 31/( ) = 31/560 = 0.055, CE 1 = ( 2) + ( 4) = +19; MAD 2 = ( )/6 = 15/6 = 2.5, MAPD 2 = 15/560 = 0.027, CE 2 = 3 + ( 1) ( 2) + ( 4) + ( 3) = 5; method #2 is better because MAD, MAPD and CE are all smaller in magnitude A2. Computational Questions from Old Exams 1. a) F 7 = ( )/3 = 490 b) F 8 = α D 7 + (1 α) F 7 = 0.15(1060) (490) = c) Since the demand for quarter 7 is notably larger than the demand for quarters 4-6, the sudden demand increase in quarter 7 should not be disregarded as a result of random variation. In order to reflect the recent change in demand, choose a higher value of α. d) Cumulative Error = Σ(D t F t) = ( ) + ( ) + ( ) + ( ) = 610; the large positive cumulative error indicates that the forecast has been highly underestimated. e) Ice cream can be a seasonal product, and in this case, a seasonal pattern is observed in the given demand data. So compute the forecast based on the seasonal forecast method. Seasonal factors: S 1 = D 1/ΣD i = 1170/ , S 2 = 2140/ , S 3 = 3030/ , S 4 = 1490/ Forecast for each quarter: F yr4, 1 = (S 1)(F yr4) = (0.15)(2980) = 447, F yr4, 2 = (0.27)(2980) = , F yr4, 3 = (0.39)(2980) = , F yr4, 4 = (0.19)(2980) = a) P = $34.99 per unit, D = 3100 per year, C O = = $135 per order, C H = 0.11(34.99) = $3.85 per unit per year EOQ = (2DC O/C H) 1/2 = [2(3100)(135)/3.85] 1/2 = sweatshirts b) Compare the total cost for the following three scenarios: Order basic EOQ: TC = C O(D/EOQ) + C H(EOQ/2) + P D = 135(3100/466.26) (466.26/2) (3100) = $110, Order 500 to qualify for the first purchase discount (3%): TC = 135(3100/500) (500/2) (34.99)(3100) = $107, lowest TC Order 2000 to qualify for the second purchase discount (5%): TC = 135(3100/2000) (2000/2) (34.99)(3100) = $107, Take 3% discount; the new optimal order quantity is 500. c) Optimal order quantity (from part b) = 500 Number of orders per year = 3100/500 = Average inventory = 500/2 = 250 d) Lead time, L = 3 Daily demand rate, d = 3100/260 = Reorder point = d L = (12)(3) = 36 e) Shortage cost has not been included in calculation because shortage never occurs in the basic EOQ model and EOQ with quantity discount due to the assumptions on demand (known and constant) and supply (certain and receive all at once). 3. F 7 = αd 6 + (1 α)f 6 = 0.12(10200) (9500) = 9584 boxes EOQ = (2DC O/C H) ½ = [2(9584)(80)/(0.85)] ½ = boxes Order interval = (No. of days in a year)/(no. of orders) = 365/(D/Q*) = 365/(9584/1343) = days 12
13 Periodic review system: order 1343 boxes every 51 days TC = C O(D/EOQ) + C H(EOQ/2) = 80(9584/ ) ( /2) = $ Average inventory level = EOQ/2 = /2 = boxes 4. Current safety stock level = z σ d (L) ½ = (1.28)(1.7)(21) ½ = monitors Once you obtain safety stock, the main inventory cost associated with safety stock is holding cost. Current cost of holding 10 units of safety stock = (per-unit holding cost) (# of safety stock) = (25)(10) = $250 if ABC is willing to spend 50% more on safety stock, then ABC s new holding cost = = $375 New holding cost = 375 = (per-unit holding cost) (safety new service level) = 25 [z (1.7)(21) ½ ] solve for z to find out what new service level could be achieved z = ABC could achieve at least 97% service level with 50% more spent on safety stock holding cost. 5. a = 3-month SMA = ( )/3 = In order to find b, set up any forecast equation that includes b: for example, F 6 = (D 5+D 4+D 3)/3 = (b )/3 solve for b = 1220 c = 285 d = e = f = Is the storage expansion a good idea? Max inventory level = Q(1 d/p) 750 = Q( /28000) Q = 1750 bottles = current production quantity TC = C O(D/Q) + C H(Q/2)(1 d/p) = 1100(16000/1750) (1750/2)( /28000) = $11, Following the full storage production policy with storage expansion: 3000 = Q( /28000) Q = 7000 bottles = production quantity after storage expansion TC = 1100(16000/7000) (7000/2)( /28000) = $ storage expansion leads to cost savings What would be an optimal production quantity? EPQ = {2DC O/[C H(1 d/p)]} ½ = {2(16000)(1100)/[(2.75)( /28000)} ½ = ; TC = 1100(16000/5465) (5465/2)( /28000) = $ cost savings compared to the current production policy However, max inventory level = EPQ(1 d/p) = ( /28000) = > current storage capacity if EPQ were to be used, the storage space must be expanded Length of a production run = EPQ/p = /(28000/365) = days 7. a) By observation, demand and forecast figures are relatively close in magnitude no need for MSE; MAD might be hard to interpret by itself MAPD is easier to interpret by measuring forecast error relative to the demand level; use CE to measure bias error MAPD = Σ D t F t / ΣD t = ( ) / ( ) = 115/515 = 0.223; quite high level of error relative to the size of demand CE = Σ(D t F t) = ( 20) + ( 10) + (60) + ( 10) + ( 15) = +5; the forecasts have been biased slightly low; however, looking at the data reveals that 4 out 5 forecasts were biased high, not low 13
14 General Improvement: lower forecast value in general; demand data exhibit quite a bit of fluctuation be more responsive to change in demand, rather than smoothing; investigate the cause for the rather big increase in period 3 (was it random or by some special cause?); the product may also be a seasonal product if so, make use of the seasonal forecast method b) Not possible to get F 6 = 165 from D 3 = 160, D 4 = 100, and D 5 = 85 using a 3-period weighted moving average; the largest possible forecast based on the weighted moving average is only 160 when the weights are w 3 = 1, w 4 = 0 and w 5 = 0 c) The claim exponential smoothing only includes the most recent demand is not true; the formula for exponential smoothing implies that all past demands are included: F t+1 = αd t + (1 α)f t = αd t + (1 α)[αd t 1 + (1 α)f t 1] and so on. Exponential smoothing and simple moving average have different advantages and limitations, so we cannot conclude that simple moving average is always better than exponential smoothing B1. Multiple Choice Questions from Old Exams Question Answer 1 d 2 b 3 a 4 d 5 c 6 b 7 c 8 b 9 a 10 b 11 b 12 c 13 b 14 b 15 c 16 a 17 b 18 b 19 a 20 b 21 d C1. Textbook Discussion Questions Intro, #1 Lecture notes, Introduction, slide 4 Intro, #2 E.g., operations managers must plan the production schedule, manage quality levels, and manage inventory Intro, #3 E.g., fast food restaurant: the inputs include the cook, the grill, and the materials such as the meat, bun, and toppings; the materials are then transformed into the cooked hamburger Intro, #4 Lecture notes, Introduction, slide 3 Intro, #8 Lecture notes, Introduction, slide 7 14
15 SCM, #10 Partnering is the development of a close relationship with a supplier, based on trust, shared information and vision; the advantages are the ability to reduce costs, improve quality and planning; the disadvantages are the violation of trust that can cause problems and the inability to quickly change suppliers if problems arise SCM, #11 Lecture notes, Supply Chain Management, slide 9 SCM Case DIMCO #1 DIMCO currently has 375 different suppliers from around the world. They supply 1350 different components or raw material items. DIMCO sends all of its finished goods to a central warehouse that next supplies ten regional distributions centers (RDCs). Each of the RDCs supplies an average of 12 local distributors that supply an average of 35 retailers. Inv, #2 Lecture notes, Inventory Management, slide 2-3 Inv, #3 Lecture notes, Inventory Management, slide 4 Inv, #7 Lecture notes, Inventory Management, slide 9 Inv, #8 Lecture notes, Inventory Management, slide 9 Inv, #9 Lecture notes, Inventory Management, slide 9 Inv, #10 Lecture notes, Inventory Management, slide 9 Inv, #11 Lecture notes, Inventory Management, slide 10 Inv, #13 Increases in the demand or ordering costs will increase the EOQ since they have a positive relationship, which also means that decreases in them will decrease the EOQ; there is an inverse or negative relationship between holding costs and EOQ, e.g., as they increase, the EOQ decreases, and vice versa Inv, #15 Lecture notes, Inventory Management, slide 20 Inv, #16 Safety stock increases the reorder point Inv, #18 Lecture notes, Inventory Management, slide 7 Inv, #19 Perpetual review is the same as continuous updating of the inventory record Fcst, #3 Lecture notes, Forecasting, slide 5 Fcst, #4 Lecture notes, Forecasting, slide 4 Fcst, #5 Lecture notes, Forecasting, slide 6-7 Fcst, #6 Fcst, #8 Fcst, #9 Fcst Case Time series models assume that the demand is only related to its own past demand patterns; causal models assume that the some other factor affects the variable we are trying to predict Using the same forecasting model may not continue to be the best way to accurately forecast demand if changes in the environment occur We should consider the amount and type of available data, the degree of accuracy, the length of forecast horizons, and whether data patterns exist; we should evaluate the tradeoffs between data accuracy and the cost to forecast Bra-Wear #1 No, seasonal exponential smoothing is not the best model for forecasting Urban Run athletic wear because the demand pattern is no longer seasonal. 15
16 C2. Short Answer Questions from Old Exams The following are guidelines only since there is more than one way to answer short answer questions. 1. An example of ABC inventory management system for a convenience store: Item A Fast moving, high volume e.g., chips, chocolate bars, drinks Relatively fast moving, high $value per item e.g., cigarettes B Moderate moving, moderate $value e.g., packaged candies, stamps, lottery tickets C Slow moving e.g., emergency items such as toothpaste, sun tan lotion, can openers Very low $value per item e.g., loose candies with 5 and 10 value Inventory Management Policy Continuous review Tight control Frequent deliveries Accurate inventory required Continuous or periodic review Moderate control Weekly or monthly deliveries Order in batches Periodic review Simple control Monthly or quarterly deliveries Visual review 2. Examples of strategies: vendor managed inventory, plant-direct shipping, cross docking, virtual integration; each strategy requires a justification based on, for example, the nature of business, products, company size, etc. 3. Examples of appropriate methods: simple moving average if the demand is generally stable; seasonality method if the demand exhibits a seasonal pattern; each method requires a justification based on, for example, what you think about the demand pattern, data availability, etc. The selection of parameter values is an iterative process in general; the starting values may be low, medium, or high depending on the demand pattern. 16
MOS 3330 Test 2 Review Problems & Solutions
MOS 3330 Test 2 Review Problems & Solutions General Information Test date, time, location: See the course outline See also the course web site: dan.uwo.ca/courses/3330 Test time conflict (due to having
More informationDemand forecasting & Aggregate planning in a Supply chain. Session Speaker Prof.P.S.Satish
Demand forecasting & Aggregate planning in a Supply chain Session Speaker Prof.P.S.Satish 1 Introduction PEMP-EMM2506 Forecasting provides an estimate of future demand Factors that influence demand and
More informationIndustry Environment and Concepts for Forecasting 1
Table of Contents Industry Environment and Concepts for Forecasting 1 Forecasting Methods Overview...2 Multilevel Forecasting...3 Demand Forecasting...4 Integrating Information...5 Simplifying the Forecast...6
More informationINVENTORY MANAGEMENT. 1. Raw Materials (including component parts) 2. Work-In-Process 3. Maintenance/Repair/Operating Supply (MRO) 4.
INVENTORY MANAGEMENT Inventory is a stock of materials and products used to facilitate production or to satisfy customer demand. Types of inventory include: 1. Raw Materials (including component parts)
More informationOperations Management
11-1 Inventory Management 11-2 Inventory Management Operations Management William J. Stevenson CHAPTER 11 Inventory Management 8 th edition McGraw-Hill/Irwin Operations Management, Eighth Edition, by William
More informationSupply Chain Inventory Management Chapter 9. Copyright 2013 Pearson Education, Inc. publishing as Prentice Hall 09-01
Supply Chain Inventory Management Chapter 9 09-01 What is a Inventory Management? Inventory Management The planning and controlling of inventories in order to meet the competitive priorities of the organization.
More informationMATERIALS MANAGEMENT. Module 9 July 22, 2014
MATERIALS MANAGEMENT Module 9 July 22, 2014 Inventories and their Management Inventories =? New Car Inventory Sitting in Parking Lots Types of Inventory 1. Materials A. Raw material B. WIP C. Finished
More informationAgenda. TPPE37 Manufacturing Control. A typical production process. The Planning Hierarchy. Primary material flow
TPPE37 Manufacturing Control Agenda Lecture 2 Inventory Management 1. Inventory System Defined 2. Inventory Costs 3. Inventory classification 4. Economic order quantity model 5. Newsboy problem 6. Reorder
More information講 師 : 周 世 玉 Shihyu Chou
講 師 : 周 世 玉 Shihyu Chou Logistics involves the following activities: sourcing and purchasing inputs, managing inventory, maintaining warehouses, and arranging transportation and delivery. There are three
More informationProduction Planning. Chapter 4 Forecasting. Overview. Overview. Chapter 04 Forecasting 1. 7 Steps to a Forecast. What is forecasting?
Chapter 4 Forecasting Production Planning MRP Purchasing Sales Forecast Aggregate Planning Master Production Schedule Production Scheduling Production What is forecasting? Types of forecasts 7 steps of
More informationOperations and Supply Chain Management Prof. G. Srinivasan Department of Management Studies Indian Institute of Technology Madras
Operations and Supply Chain Management Prof. G. Srinivasan Department of Management Studies Indian Institute of Technology Madras Lecture - 41 Value of Information In this lecture, we look at the Value
More informationInventory Control Models
Chapter 12 Inventory Control Models Learning Objectives After completing this chapter, students will be able to: 1. Understand the importance of inventory control. 2. Use inventory control models to determine
More informationSupply Chain Management: Inventory Management
Supply Chain Management: Inventory Management Donglei Du Faculty of Business Administration, University of New Brunswick, NB Canada Fredericton E3B 9Y2 (ddu@umbc.edu) Du (UNB) SCM 1 / 83 Table of contents
More informationTeaching Manual-Operation Management. Gunadarma University. Week : 9 Subject : INVENTORY MANAGEMENT Content :
Week : 9 Subject : INVENTORY MANAGEMENT Content : WHY INVENTORY a. One of the most expensive assets of many companies representing as much as 50% of total invested capital b. Operations managers must balance
More informationLogistics Management Inventory Cycle Inventory. Özgür Kabak, Ph.D.
Logistics Management Inventory Cycle Inventory Özgür Kabak, Ph.D. Role of Inventory in the Supply Chain Improve Matching of Supply and Demand Improved Forecasting Reduce Material Flow Time Reduce Waiting
More informationOperations Management. 3.3 Justify the need for Operational Planning and Control in a selected Production Process
Operations Management 3.3 Justify the need for Operational Planning and Control in a selected Production Process Key Topics LO3 Understand how to organise a typical production process 3.3 justify the need
More informationUd Understanding di inventory issues
Lecture 10: Inventory Management Ud Understanding di inventory issues Definition of inventory Types of inventory Functions of inventory Costs of holding inventory Introduction to inventory management Economic
More informationInventory Management - A Teaching Note
Inventory Management - A Teaching Note Sundaravalli Narayanaswami W.P. No.2014-09-01 September 2014 INDIAN INSTITUTE OF MANAGEMENT AHMEDABAD-380 015 INDIA Inventory Management - A Teaching Note Sundaravalli
More informationCHOICES The magazine of food, farm, and resource issues
CHOICES The magazine of food, farm, and resource issues 4th Quarter 2005 20(4) A publication of the American Agricultural Economics Association Logistics, Inventory Control, and Supply Chain Management
More informationForecasting DISCUSSION QUESTIONS
4 C H A P T E R Forecasting DISCUSSION QUESTIONS 1. Qualitative models incorporate subjective factors into the forecasting model. Qualitative models are useful when subjective factors are important. When
More informationIT S ALL ABOUT THE CUSTOMER FORECASTING 101
IT S ALL ABOUT THE CUSTOMER FORECASTING 101 Ed White CPIM, CIRM, CSCP, CPF, LSSBB Chief Value Officer Jade Trillium Consulting April 01, 2015 Biography Ed White CPIM CIRM CSCP CPF LSSBB is the founder
More informationExponential Smoothing with Trend. As we move toward medium-range forecasts, trend becomes more important.
Exponential Smoothing with Trend As we move toward medium-range forecasts, trend becomes more important. Incorporating a trend component into exponentially smoothed forecasts is called double exponential
More informationAlessandro Anzalone, Ph.D. Hillsborough Community College, Brandon Campus
Alessandro Anzalone, Ph.D. Hillsborough Community College, Brandon Campus 1. Introduction 2. Basic Concepts of Inventory 3. Categories of Inventory 4. The Basic Inventory Lot Sizing Model Economic Order
More informationOperations and Supply Chain Management Prof. G. Srinivasan Department of Management Studies Indian Institute of Technology, Madras
Operations and Supply Chain Management Prof. G. Srinivasan Department of Management Studies Indian Institute of Technology, Madras Lecture - 36 Location Problems In this lecture, we continue the discussion
More informationEffective Replenishment Parameters. By Jon Schreibfeder EIM. Effective Inventory Management, Inc.
Effective Replenishment Parameters By Jon Schreibfeder EIM Effective Inventory Management, Inc. This report is the fourth in a series of white papers designed to help forward-thinking distributors increase
More informationChapter 6. Inventory Control Models
Chapter 6 Inventory Control Models Learning Objectives After completing this chapter, students will be able to: 1. Understand the importance of inventory control and ABC analysis. 2. Use the economic order
More informationInventory Decision-Making
Management Accounting 195 Inventory Decision-Making To be successful, most businesses other than service businesses are required to carry inventory. In these businesses, good management of inventory is
More informationDemand Forecasting When a product is produced for a market, the demand occurs in the future. The production planning cannot be accomplished unless
Demand Forecasting When a product is produced for a market, the demand occurs in the future. The production planning cannot be accomplished unless the volume of the demand known. The success of the business
More informationContracts. David Simchi-Levi. Professor of Engineering Systems
Introduction to Stochastic Inventory Models and Supply Contracts David Simchi-Levi Professor of Engineering Systems Massachusetts Institute of Technology Introduction Outline of the Presentation The Effect
More informationGlossary of Inventory Management Terms
Glossary of Inventory Management Terms ABC analysis also called Pareto analysis or the rule of 80/20, is a way of categorizing inventory items into different types depending on value and use Aggregate
More informationBasics of inventory control
35A00210 Operations Management Lecture 13 control Lecture 13 control Basics of inventory control models continuous review periodic review other models Basics of inventory control control is boring but
More informationUniversidad del Turabo MANA 705 DL Workshop Eight W8_8_3 Aggregate Planning, Material Requirement Planning, and Capacity Planning
Aggregate, Material Requirement, and Capacity Topic: Aggregate, Material Requirement, and Capacity Slide 1 Welcome to Workshop Eight presentation: Aggregate planning, material requirement planning, and
More informationChapter 24 Stock Handling and Inventory Control. Section 24.1 The Stock Handling Process Section 24.2 Inventory Control
Chapter 24 Stock Handling and Inventory Control Section 24.1 The Stock Handling Process Section 24.2 Inventory Control The Stock Handling Process Key Terms receiving record blind check method direct check
More informationReorder level = demand during lead time = lead time x demand per unit time ROL = LT x D
Reorder Level Additional assumption: Lead time is known and constant No need to carrying stock from one cycle to the next So each order should be scheduled to arrive as existing stock runs out Reorder
More informationChapter 12 Inventory Control and Management
Chapter 12 Inventory Control and Management Learning Outcomes Describe the functions and costs of an inventory system. Determine the order quantity and Economic Order Quantity. Determine the reorder point
More informationAn Overview on Theory of Inventory
An Overview on Theory of Inventory Sandipan Karmakar Dept of Production and Industrial Engineering NIT Jamshedpur October 8, 015 1 Introduction Inventory is a stock of items kept by an organization to
More informationInventory Management and Risk Pooling
CHAPTER 3 Inventory Management and Risk Pooling CASE JAM Electronics: Service Level Crisis JAM Electronics is a Korean manufacturer of products such as industrial relays. The company has five Far Eastern
More informationModule 6: Introduction to Time Series Forecasting
Using Statistical Data to Make Decisions Module 6: Introduction to Time Series Forecasting Titus Awokuse and Tom Ilvento, University of Delaware, College of Agriculture and Natural Resources, Food and
More informationINVENTORY MANAGEMENT
7 INVENTORY MANAGEMENT MGT2405, University of Toronto, Denny Hong-Mo Yeh Inventory management is the branch of business management that covers the planning and control of the inventory. In the previous
More informationChapter 13. Working Capital Management
Chapter 13 Working Capital Management Learning Objectives 1. Model the cash conversion cycle and explain its components. 2. Understand why the timing of accounts receivable is important and explain the
More informationFORECASTING. Operations Management
2013 FORECASTING Brad Fink CIT 492 Operations Management Executive Summary Woodlawn hospital needs to forecast type A blood so there is no shortage for the week of 12 October, to correctly forecast, a
More informationAbstract: Why inventory exists. Types of inventory. This is sequel to OM 601 assignment.
Abstract: This is sequel to OM 601 assignment. The reason for this assignment is to improve overall competitiveness of Hefley Finland by focusing on inventory management. In this assignment I first clarify
More informationEffective Inventory Analysis
Effective Inventory Analysis By Jon Schreibfeder EIM Effective Inventory Management, Inc. This report is the sixth in a series of white papers designed to help forward-thinking distributors increase efficiency,
More informationA Decision-Support System for New Product Sales Forecasting
A Decision-Support System for New Product Sales Forecasting Ching-Chin Chern, Ka Ieng Ao Ieong, Ling-Ling Wu, and Ling-Chieh Kung Department of Information Management, NTU, Taipei, Taiwan chern@im.ntu.edu.tw,
More informationChapter 12 Forecasting and Short- Term Financial Planning
Chapter 12 Forecasting and Short- Term Financial Planning LEARNING OBJECTIVES 1. Understand the sources and uses of cash in building a cash budget. 2. Explain how companies use sales forecasts to predict
More informationTHE INTEGRATION OF SUPPLY CHAIN MANAGEMENT AND SIMULATION SYSTEM WITH APPLICATION TO RETAILING MODEL. Pei-Chann Chang, Chen-Hao Liu and Chih-Yuan Wang
THE INTEGRATION OF SUPPLY CHAIN MANAGEMENT AND SIMULATION SYSTEM WITH APPLICATION TO RETAILING MODEL Pei-Chann Chang, Chen-Hao Liu and Chih-Yuan Wang Institute of Industrial Engineering and Management,
More informationACTIVANT. Prophet 21 ACTIVANT PROPHET 21. New Features Guide Version 11.0 INVENTORY MANAGEMENT NEW FEATURES GUIDE (INV, PUR) Pre-Release Documentation
ACTIVANT ACTIVANT PROPHET 21 Prophet 21 INVENTORY MANAGEMENT NEW FEATURES GUIDE (INV, PUR) New Features Guide Version 11.0 Version 11.0 Pre-Release Documentation This manual contains reference information
More informationWorking Capital Management
Working Capital Management Gitman and Hennessey, Chapter 14 Spring 2004 14.1 Net Working Capital Fundamentals In 2002, current assets accounted for 31.7% of non-financial Canadian corporations total assets.
More informationWorking Capital Management
Working Capital Management Gitman and Hennessey, Chapter 14 Spring 2004 14.1 Net Working Capital Fundamentals In 2002, current assets accounted for 31.7% of non-financial Canadian corporations total assets.
More informationMaterials: Inventory Control
CHAPTER 14 Materials: Inventory Control Store and Storekeeping Stores playa vital role in the operation of a company. Generally unworked material is stored and the place where it is stored is called Store
More informationOutline: Demand Forecasting
Outline: Demand Forecasting Given the limited background from the surveys and that Chapter 7 in the book is complex, we will cover less material. The role of forecasting in the chain Characteristics of
More informationSmall Lot Production. Chapter 5
Small Lot Production Chapter 5 1 Lot Size Basics Intuition leads many to believe we should manufacture products in large lots. - Save on setup time - Save on production costs Costs associated with Lots
More informationIt is concerned with decisions relating to current assets and current liabilities
It is concerned with decisions relating to current assets and current liabilities Best Buy Co, NA s largest consumer electronics retailer, has performed extremely well over the past decade. Its stock sold
More informationUse of Statistical Forecasting Methods to Improve Demand Planning
Use of Statistical Forecasting Methods to Improve Demand Planning Talk given at the Swiss Days of Statistics 2004 Aarau, November 18th, 2004 Marcel Baumgartner marcel.baumgartner@nestle.com Nestec 1800
More informationCHAPTER 6 FINANCIAL FORECASTING
TUTORIAL NOTES CHAPTER 6 FINANCIAL FORECASTING 6.1 INTRODUCTION Forecasting represents an integral part of any planning process that is undertaken by all firms. Firms must make decisions today that will
More informationCHAPTER 6 AGGREGATE PLANNING AND INVENTORY MANAGEMENT 명지대학교 산업시스템공학부
CHAPTER 6 AGGREGATE PLANNING AND INVENTORY MANAGEMENT 명지대학교 산업시스템공학부 Learning Objectives You should be able to: Describe the hierarchical operations planning process in terms of materials planning & capacity
More informationA MANAGER S ROADMAP GUIDE FOR LATERAL TRANS-SHIPMENT IN SUPPLY CHAIN INVENTORY MANAGEMENT
A MANAGER S ROADMAP GUIDE FOR LATERAL TRANS-SHIPMENT IN SUPPLY CHAIN INVENTORY MANAGEMENT By implementing the proposed five decision rules for lateral trans-shipment decision support, professional inventory
More informationtutor2u Stock Control The Importance of Managing Stocks AS & A2 Business Studies PowerPoint Presentations 2005
Stock Control The Importance of Managing Stocks AS & A2 Business Studies PowerPoint Presentations 2005 What Are Stocks? Three main categories of stocks Raw Materials Work in Progress Finished Goods Types
More informationAn Analysis of Inventory Management of T-Shirt at Mahanagari Bandung Pisan
www.sbm.itb.ac.id/ajtm The Asian Journal of Technology Management Vol. 3 No. 2 (2010) 92-109 An Analysis of Inventory Management of T-Shirt at Mahanagari Bandung Pisan Togar M. Simatupang 1 *, Nidia Jernih
More information1 2 3 4 5 Demand 150 170 180 160 160
MGT 3110: Exam 2 Study Guide 1. What is aggregate planning? What is its purpose? 2. What are demand options for aggregate planning? Give examples and discuss the effects of each. 3. Why is there a need
More informationBy: ATEEKH UR REHMAN 12-1
12 Inventory Management By: ATEEKH UR REHMAN 12-1 Inventory Management The objective of inventory management is to strike a balance between inventory investment and customer service 12-2 Importance of
More informationPackage SCperf. February 19, 2015
Package SCperf February 19, 2015 Type Package Title Supply Chain Perform Version 1.0 Date 2012-01-22 Author Marlene Silva Marchena Maintainer The package implements different inventory models, the bullwhip
More informationUsing INZight for Time series analysis. A step-by-step guide.
Using INZight for Time series analysis. A step-by-step guide. inzight can be downloaded from http://www.stat.auckland.ac.nz/~wild/inzight/index.html Step 1 Click on START_iNZightVIT.bat. Step 2 Click on
More informationInventory Control Subject to Known Demand
Production and Operation Managements Inventory Control Subject to Known Demand Prof. JIANG Zhibin Department of Industrial Engineering & Management Shanghai Jiao Tong University Contents Introduction Types
More informationHow to Use the Cash Flow Template
How to Use the Cash Flow Template When you fill in your cash flow you are trying to predict the timing of cash in and out of your bank account to show the affect and timing for each transaction when it
More informationPractical Applications for Clinical Demand and Operations Planning
Practical Applications for Clinical Demand and Operations Planning Randy Schwemmin Genentech Clinical Demand and Supply Planning Biotech Supply Chain Academy 8 November 2011 Agenda Vision for Clinical
More information11.3 BREAK-EVEN ANALYSIS. Fixed and Variable Costs
385 356 PART FOUR Capital Budgeting a large number of NPV estimates that we summarize by calculating the average value and some measure of how spread out the different possibilities are. For example, it
More informationSmoothing methods. Marzena Narodzonek-Karpowska. Prof. Dr. W. Toporowski Institut für Marketing & Handel Abteilung Handel
Smoothing methods Marzena Narodzonek-Karpowska Prof. Dr. W. Toporowski Institut für Marketing & Handel Abteilung Handel What Is Forecasting? Process of predicting a future event Underlying basis of all
More informationAnalysis of Various Forecasting Approaches for Linear Supply Chains based on Different Demand Data Transformations
Institute of Information Systems University of Bern Working Paper No 196 source: https://doi.org/10.7892/boris.58047 downloaded: 16.11.2015 Analysis of Various Forecasting Approaches for Linear Supply
More informationBusiness Plan Planning Service Financial Analyses and Projections
Business Plan Planning Service Financial Analyses and Projections Financials Included With Every Ceo Resource Plan These are the financial analyses and projections that are included with all plans developed
More informationThe Strategic Role of Forecasting in Supply Chain Management and TQM
Forecasting A forecast is a prediction of what will occur in the future. Meteorologists forecast the weather, sportscasters and gamblers predict the winners of football games, and companies attempt to
More informationInventory Management, Just-in-Time, and Backflush Costing
Inventory Management, Just-in-Time, and Backflush Costing Inventory Management in Retail Organizations Inventory Management is planning coordinating controlling activities related to the flow of inventory
More informationAgenda. Managing Uncertainty in the Supply Chain. The Economic Order Quantity. Classic inventory theory
Agenda Managing Uncertainty in the Supply Chain TIØ485 Produkjons- og nettverksøkonomi Lecture 3 Classic Inventory models Economic Order Quantity (aka Economic Lot Size) The (s,s) Inventory Policy Managing
More informationIndian School of Business Forecasting Sales for Dairy Products
Indian School of Business Forecasting Sales for Dairy Products Contents EXECUTIVE SUMMARY... 3 Data Analysis... 3 Forecast Horizon:... 4 Forecasting Models:... 4 Fresh milk - AmulTaaza (500 ml)... 4 Dahi/
More informationInventory basics. 35A00210 Operations Management. Lecture 12 Inventory management. Why do companies use inventories? Think about a Siwa store
35A00210 Operations Management Lecture 12 Inventory management Lecture 12 Inventory management Inventory basics Inventory basics Pros and cons of inventory Inventory numbers Inventory management in practice
More informationBasics of Supply Chain Management (BSCM) Curriculum
Basics of Supply Chain Management (BSCM) Curriculum Version 4.0 Session 1 to Supply Chain Management to Manufacturing Role of Manufacturing Global Citizenship Manufacturing Business Model Business Environment
More information2) The three categories of forecasting models are time series, quantitative, and qualitative. 2)
Exam Name TRUE/FALSE. Write 'T' if the statement is true and 'F' if the statement is false. 1) Regression is always a superior forecasting method to exponential smoothing, so regression should be used
More informationMBA350 INTEGRATIVE CAPSTONE COURSE
MBA350 INTEGRATIVE CAPSTONE COURSE Individual Assignment Spring 2008 Raffaello Curtatone Team # 6 Index Introduction and general drivelines... 3 S&A Report... 4 Marketing Research... 4 Cost of Goods Sold...
More informationThe aim behind the calculations of EOQ and ROL is to weigh up these, and other advantages and disadvantages and to find a suitable compromise level.
Stock control by Tony Mock 12 Feb 2004 Stock control features in the syllabuses of several ACCA examination papers, including CAT Papers 4 and 10, and Professional Scheme Papers 1.2 and 2.4. The areas
More informationMICROSOFT EXCEL 2007-2010 FORECASTING AND DATA ANALYSIS
MICROSOFT EXCEL 2007-2010 FORECASTING AND DATA ANALYSIS Contents NOTE Unless otherwise stated, screenshots in this book were taken using Excel 2007 with a blue colour scheme and running on Windows Vista.
More informationStock Out Analysis: An Empirical Study on Forecasting, Re-Order Point and Safety Stock Level at PT. Combiphar, Indonesia
Rev. Integr. Bus. Econ. Res. Vol 3(1) 52 Stock Out Analysis: An Empirical Study on Forecasting, Re-Order Point and Safety Stock Level at PT. Combiphar, Indonesia Christine Mekel PT Bank Central Asia, Tbk
More informationMBA Math for Executive MBA Program
MBA Math for Executive MBA Program MBA Math is an online training tool which prepares you for your MBA classes with an overview of Excel, Finance, Economics, Statistics and Accounting. Each section has
More informationQuestions 1, 3 and 4 gained reasonable average marks, whereas Question 2 was poorly answered, especially parts (b),(c) and (f).
General Comments This sitting produced a reasonable pass rate for a resit paper although there was a large variation in pass rates between centres. It was clear that well-prepared candidates did not have
More informationCHAPTER 11 FORECASTING AND DEMAND PLANNING
OM CHAPTER 11 FORECASTING AND DEMAND PLANNING DAVID A. COLLIER AND JAMES R. EVANS 1 Chapter 11 Learning Outcomes l e a r n i n g o u t c o m e s LO1 Describe the importance of forecasting to the value
More informationIntroduction to Inventory Replenishment
Introduction to Inventory Replenishment Davisware 514 Market Loop West Dundee, IL 60118 Phone: (847) 426-6000 Fax: (847) 426-6027 Contents are the exclusive property of Davisware. Copyright 2011. All Rights
More informationChapter 7 Production Planning
Production Planning and Control Chapter 7 Production Planning Professor JIANG Zhibin Dr GRANG Na Department of Industrial Engineering & Management Shanghai Jiao Tong University Contents Introduction Master
More informationStudying Material Inventory Management for Sock Production Factory
Studying Inventory Management for Sock Production Factory Pattanapong Ariyasit*, Nattaphon Supawatcharaphorn** Industrial Engineering Department, Faculty of Engineering, Sripatum University E-mail: pattanapong.ar@spu.ac.th*,
More informationHOW MUCH INVENTORY DO YOU NEED? Presented By: Tracy Moffatt AGM Education Team K&K Consulting
HOW MUCH DO YOU NEED? Presented By: Tracy Moffatt AGM Education Team K&K Consulting Many stores carry 2 to 3 times more inventory than they need Many stores have no idea how much inventory they need to
More informationSection D: Logistics. 2008 APICS All rights reserved. 2-141 Version 1.4 Draft 2
This section is designed to Define logistics and explain its relationship to supply chain strategy Describe the interrelationship of the various logistics functions Define warehousing and sketch a brief
More informationAccounting for a Merchandising Business
Chapter 11 Accounting for a Merchandising Business ANSWERS TO SECTION 11.1 REVIEW QUESTIONS (text p. 428) The Merchandising Business 1. 2. 3. 4. 5. 6. 7. 8. 9. 10. 11. 12. 13. 1. 2. 3. 4. 14. 15. Copyright
More informationProfitTool Inventory Management System Item Demand Forecasting & Automated Purchasing
ProfitTool Inventory Management System Item Demand Forecasting & Automated Purchasing A White Paper on the Key Functions ProfitTool Inventory Management General Data Systems has developed the ProfitTool
More informationIntegrating a Factory and Supply Chain Simulator into a Textile Supply Chain Management Curriculum
Integrating a Factory and Supply Chain Simulator into a Textile Supply Chain Management Curriculum Kristin Thoney Associate Professor Department of Textile and Apparel, Technology and Management ABSTRACT
More informationINVENTORY MANAGEMENT WITH INDEPENDENT DEMAND Cases
INVENTORY MANAGEMENT WITH INDEPENDENT DEMAND Cases CASE 1. ABC ANALISYS AND INVENTORY MANAGEMENT SYSTEM Ref. Annual Demand in Euro Cumulated in Euro Demand % total demand Class 1 3.700.000 3.700.000 53
More informationUSING FORECASTING TOOLS
USING FORECASTING TOOLS IFS Inventory Planning and Replenishment IFS CUSTOMER SUMMIT 2011, CHICAGO GREG ROMANELLO SENIOR IMPLEMENTATION MANAGER greg.romanello@ifsworld.com IFS Customer Summit 2011, Chicago
More informationInventory: Independent Demand Systems
Inventory: Independent Demand Systems Inventory is used in most manufacturing, service, wholesale, and retail activities and because it can enhance profitability and competitiveness. It is widely discussed
More informationEffective Replenishment Parameters By Jon Schreibfeder
WINNING STRATEGIES FOR THE DISTRIBUTION INDUSTRY Effective Replenishment Parameters By Jon Schreibfeder >> Compliments of Microsoft Business Solutions Effective Replenishment Parameters By Jon Schreibfeder
More informationChapter. Working capital
Chapter 10 Working capital 1 10.1 Working capital Working capital is the capital available for conducting the day-to-day operations of the business and consists of current assets and current liabilities.
More informationSimple Interest. and Simple Discount
CHAPTER 1 Simple Interest and Simple Discount Learning Objectives Money is invested or borrowed in thousands of transactions every day. When an investment is cashed in or when borrowed money is repaid,
More informationStrategic Framework to Analyze Supply Chains
Strategic Framework to Analyze Supply Chains 1 Andy Guo A Strategic Framework for Supply Chain Design, Planning, and Operation Part I: Understand the supply chain Part II: Supply chain performance Part
More informationChapter 12. Inventory Management. Operations Management - 5 th th Edition. Roberta Russell & Bernard W. Taylor, III.
Chapter 1 Inventory Management Operations Management - 5 th th Edition Roberta Russell & Bernard W. Taylor, III Copyright 006 John Wiley & Sons, Inc. Beni Asllani University of Tennessee at Chattanooga
More information