2 Content 1. Features 2. Specifications 3. Parts and accessory 4. The device at a glance 5. Installing a SATA hard disk drive 6. The backup software 6.1 Installation 6.2 The user interface The backup window (data backup) The restore window (data recovery) The schedule window (time schedule) The setting window (configuration)
3 Dear customer! Congratulations for purchasing this premium quality SHARKOON product. For a long life time and to take full advantage of this product we recommend that you read this manual completely. Have a good time with our product! SHARKOON Technologies GmbH 1. Features Suitable for 2.5" SATA hard disk drives (9.5 mm height) Compact case in pocket size Tool free assembly Fold-out USB connector One Click Backup function (only Windows) Backup software included No drivers needed for Windows, Mac and Linux 2. Specifications External interface: USB2.0 (compatible to USB1.x) Internal interface: SATA (Version I and II) Data transfer rate: max. 480 Mbit/s Dimensions: 135 x 85 x 14 mm (L x W x H) Weight: ~51 g
4 3. Parts and accessory A B C D QuickStore Portable (A) USB Y cable (B) Quick start manual (C) Tools CD incl. backup software and extensive manual (PDF / D) Note: If you are missing any of the items listed above, please contact our customer service via at or call: + 49 (0)
5 4. The device at a glance A B C C A QuickStore Portable with black aluminum cover B QuickStore Portable with mirrored metal cover C Backup button: pressing this button starts a backup process with the predefined settings (see chapter 6) A A Case cover lock A B A USB plug in its detent B Case cover A B A SATA connector (data and power) B HDD mounting bay (for one 2.5"-SATA HDD)
6 5. Installing a SATA hard disk drive 1. Open the case cover lock (fig. 1). fig Remove the case cover from the case body (fig. 2). fig Slide a 2.5 SATA HDD into the HDD mounting bay (fig. 3). fig. 3
7 4. Place the case cover back onto the case body (fig. 4). fig Close the lock (fig. 5). fig Fold-out the USB plug from its detent (fig. 6) and connect it to a USB connector of your PC/laptop. fig The QuickStore Portable will automatically be recognized by the operating system and all required drivers will be installed. The device is now ready.
8 Note: 1. By specification USB ports provide 500 ma current which is enough to operate most 2.5" hard disk drives. In case your HDD requires more than 500 ma current you need to connect the included USB Y cable to assure a stable power supply. 2. Brand new HDDs built into the case must be partitioned and formatted. Proceed as described below (e.g. Windows XP): Start / Settings / Control Panel / Administrative Tools / Computer Management / Disk Management. Click the respective HDD with the right mouse button and choose partition/format. 6. The backup software 6.1 Installation (Windows for example) 1. Put the included Tools CD into your CD/DVD drive. 2. In the Windows Explorer open the directory on the Tools CD SHARKOON with a double click (left mouse button). 3. Double click (left mouse button) Setup.exe, a language selection window will open up. Select the desired language and confirm with OK.
9 The installation routine will commence (fig. 1). fig Confirm the copyright note in the next window (fig. 2) with Next or Cancel the installation process. fig. 2
10 5. Click Install in the next window (fig. 3) to install the backup software. Back will bring you to the previous window, Cancel ends the installation process. fig The backup software will be installed to your system (fig. 4). fig. 4
11 7. Complete the installation procedure by left clicking Finish (fig. 5). fig After finishing the installation process successfully the following icon will appear on your desktop: To start the backup software double click (left mouse button) this icon.
12 6.2 The user interface The backup window (data backup) D B E A C G F H I A Activate the windows Backup (data backup), Restore (data recovery), Schedule (time schedule) and Setting (configuration) by left clicking the respective button. B Source directory for data backup. C Box displaying the source directory s content. Activating the check boxes adds the folder(s) to the backup schedule, deactivating the check boxes will exclude the folder(s) from the backup schedule. D Buttons for Help (?), Minimize window (_) and Close window (X). E Target directory for data backup. F Info showing remaining and total size of the backup files. G Backup mode: Only backup modified files includes only files which have been changed since the last backup; Delete the destination file erases files inside the target directory which are no longer present in the source directory.
13 H Backup starts the backup with the defined settings. After finishing the backup the following confirmation will pop up: Click Close to close this window and return to the backup program or left click Log File to view the backup log. I Click Save to save your settings (confirm the following pop-up with Yes or choose No to cancel).
14 6.2.2 The restore window (data recovery) E B D F A C G A Activate the windows Backup (data backup), Restore (data recovery), Schedule (time schedule) and Setting (configuration) by left clicking the respective button. B Source directory for data recovery. C Box displaying the content of the selected directory. Activating the check boxes adds the folder(s) to the restore schedule, deactivating the check boxes will exclude the folder(s) from the restore schedule. D Activate/Deactivate the option Only restore modified files to only recover files that have been changed in the meantime. E Buttons for Help (?), Minimize window (_) and Close window (X). F Select Restore to original path (keeping the original folder structure) or Restore to user defined path (using a custom path). G Click Restore to commence the restore procedure or Save to save your settings (confirm the following popup with Yes, No to cancel).
15 6.2.3 The schedule window (time schedule) C B D A E A Activate the windows Backup (data backup), Restore (data recovery), Schedule (time schedule) and Setting (configuration) by left clicking the respective button. B Left clicking the respective calendar date defines a special day to backup your data. Selected calendar dates are marked in blue, red marks the current day. C Buttons for Help (?), Minimize window (_) and Close window (X). D Decide whether the backup shall be performed daily, weekly or monthly. If you do not want to define a recurring date choose None. E Click Save to save your settings (confirm the following pop-up with Yes, No will cancel).
16 6.2.4 The setting window (configuration) D B A C E A Activate the windows Backup (data backup), Restore (data recovery), Schedule (time schedule) and Setting (configuration) by left clicking the respective button. B Define a HotKey to launch the backup software directly. C By activating/deactivating the check boxes select/deselect the following options: 1. Backup/Restore Confirmation : defines whether or not you will receive a confirmation after a successful backup/restore procedure; 2. Ignore Error During Backup/Restore : ignores all errors occurring during the backup/restore process; 3. Autorun CloneMe When Login starts the backup program during your operating system s start; 4. Shutdown After Backup/Restore complete shuts down your computer after successfully completing a backup/restore procedure. D Buttons for Help (?), Minimize window (_) and Close window (X). E Click Save to save your settings (confirm the following pop-up with Yes, No will cancel).
17 Warning: For potential loss of data, especially due to inappropriate handling, SHARKOON assumes no liability. All named products and descriptions are trademarks and/or registered trademarks of the respective manufacturers and are accepted as protected. As a continuing policy of product improvement at SHARKOON, the design and specifications are subject to change without prior notice. National product specifications may vary. The legal rights of the enclosed software belong to the respective owner. Please observe the license terms of the manufacturer before using the software. All rights reserved especially (also in extracts) for translation, reprinting, reproduction by copying or other technical means. Infringements will lead to compensation. All rights reserved especially in case of assignation of patent or utility patent. Means of delivery and technical modifications reserved.
18 Disposal of your old product Your product is designed and manufactured with high quality materials and components, which can be recycled and reused. When this crossed-out wheeled bin symbol is attached to a product, it means the product is covered by the European Directive 2002/96/EC. Please be informed about the local separate collection system for electrical and electronic products. Please act according to your local rules and do not dispose of your old products with your normal household waste. The correct disposal of your old product will help prevent potential negative consequences to the environment and human health. SHARKOON Technologies GmbH 2009
Office NAS 3.5 IDE/SATA Network Attached Storage Model # ANAS350 User s Manual Ver. 2.3 Table of Contents 1. Introduction... 3 1.1 Package Contents... 3 1.2 Features... 3 1.3 NAS Diagram... 4 2. Hard Drive
USB3.0 Docking Station User Manual (DA-70546) Foreword Congratulations on your purchase of our product! We will show you a new storage concept with safety and convenience It is our pleasure to give you
User Manual OMNINAS KD20 CHAPTER TITLE TABLE OF CONTENTS TABLE OF CONTENTS Product Overview Features................................. 1-2 Package Contents........................... 1-2 System Requirements........................
INR-410 INR-420 System Administrator s Manual For V3.0.06 Version 2013/11/20 About This Manual Target Audience This manual is intended for System Administrators who are responsible for installing and setting
SMARTSTOR NS4300N Product Manual Version 1.4 SmartStor NS4300N Product Manual Copyright 2007 Promise Technology, Inc. All Rights Reserved. Copyright by Promise Technology, Inc. (Promise Technology). No
External Devices Handling Data transfer from digital tachograph PC NET SERVICE Stocerz Sp. J. Other devices - Tutorial - Pomoc All rights reserved. No parts of this work may be reproduced in any form or
USER GUIDE Note: 1. PROLINUX is a DHCP client and is set to auto mode by default. 2. Default IP:192.168.1.251 Port:6666 3. Default UI account: sysadmin 4. Default UI password: sysadmin1234 1 TABLE OF CONTENTS
LACIE 2BIG NAS USER MANUAL CLICK HERE TO ACCESS UP-TO-DATE ONLINE VERSION of this document for the most recent content as well as for features such as expandable illustrations, easier navigation, and search
Network Attached Storage RAID Server NAS-3200/NAS-3400 User s Manual u CE Marking u FCC Class A Safety Approvals FCC Compliance This equipment has been tested and complies with the limits for a Class A
User Manual for NetDISK ( Installation of NDAS Software Version 3.3x) For Microsoft Windows Only Windows 2000 Windows XP Windows Server 2003 Windows XP Professional x64 Edition Windows Vista Dawicontrol
User s Guide Brother Laser Printer HL-100(E) HL-10(E) HL-110W(E) HL-11W For visually-impaired users You can read this manual with Screen Reader text-to-speech software. You must set up the hardware and
USER MANUAL SILVER STORE 2-DRIVE NAS NETWORK ATTACHED HARD DRIVE / 3.5" / RAID / GIGABIT LAN / USB 3.0 HOST Rev. 120 Dear user! Thank you very much for choosing the SilverStore 2-Drive NAS. The SilverStore
LACIE 2BIG NAS LACIE 5BIG NAS PRO USER MANUAL CLICK HERE TO ACCESS AN UP-TO-DATE ONLINE VERSION of this document. You will find the most recent content as well as expandable illustrations, easier navigation,
IZAR@SET i User Manual Version: 1.1 Date of issue: 28.03.2012 Copyright: 2011 HYDROMETER / Ansbach / Germany IZAR@SET ii Contents Contents 1 Introduction... 5 1.1 Task of software... 5 1.2 System requirements...
DDST Unit Type A / Type B Operating Instructions Printer / Scanner Reference 1 2 3 4 5 6 Getting Started Installing the Software Using the Printer Function Using the TWAIN Scanner Function Troubleshooting
USB 3.0 DUAL SATA HDD DOCKING STATION User Manual (DA-70547) Introduction DA-70547 is a USB3.0 enabled dual-sata hard drive enclosure. It supports simultaneously use of two 2.5 or 3.5 SATA hard disk for
Digital Video Recorder User Manual (V2.2.4) UD.6L0202B0068A02 Regulatory Information FCC Information FCC compliance: This equipment has been tested and found to comply with the limits for a digital device,
Thecus N8900 series N12000 series N16000 series N5550/N6850/N8850/N10850 N7700PRO V2/N8800PRO V2 User s Manual Copyright and Trademark Notice Thecus and other names of Thecus products are registered trademarks
DSA-2100A Series Network Digital Signage Player User Manual Rev. 2.1 ADVANTECH CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY
MULTIFUNCTIONAL DIGITAL SYSTEMS Scanning Guide 2011 TOSHIBA TEC CORPORATION All rights reserved Under the copyright laws, this manual cannot be reproduced in any form without prior written permission of