Advanced Software Upgrade Guide

Transcription

1 Advanced Guide Applicable models: LCD TV and PDP TV are released on 2008 For Europe HD DTV model (LE**A7/A8/A9 series, PS**A7 series MX(XC/XH/XU/ZG/XQ/RU/UA/CS) For France HD DTV model (LE**A4/A5/A6***MXZF, PS**A4/A5/A6***MXZF) For Nordic HD DTV model (LE**A4/A5/A6/A7/A8/A9***WXXE, PS**A4/A5/A6/A7***WXXE) The appearance of the TV and the remote control may differ depending on your TV model. 1 Downloading the software. Download new S/W on-line ( Connect to and press the button at the top right to move to the website for the corresponding country. The name of the USB folder name may differ depending on the model. Model Name LE**A7/A8/A9*****MX (XC/XH/XU/ZG/XQ/RU/UA/CS) PS**A7*****MX (XC/XH/XU/ZG/XQ/RU/UA/CS) LE**A5/A6*****MXZF PS42A4*****MXZF LE**A7/A8/A9*****WXXE, PS**A7*****WXXE LE**A4*****WXXE, PS**A4*****WXXE LE**A6*****WXZG LE**A4*****MXZF, PS50A4*****MXZF PS**A5*****MXZF, PS**A6*****MXZF LE**A5/A6*****WXXE, PS**A5/A6*****WXXE Folder Name / File Name T-RBYDEU / T-RBYDEU.exe T-AMBDFR / T-AMBDFR.exe T-PRPDFR / T-PRPDFR.exe T-RBYDND / T-RBYDND.exe T-CRLDND / T-CRLDND.exe T-AMBDGR / T-AMBDGR.exe T-CRLDFR / T-CRLDFR.exe T-SPNDFR / T-SPNDFR.exe T-AMBDND / T-AMBDND.exe

2 How to prepare the USB Memory Drive 1. Save the firmware file from Samsung.com onto your computer. File Name : T-AMBDFR.exe, T-CRLDFR.exe, T-PRPDFR.exe, T-SPNDFR.exe (For France model) T-AMBDND.exe, T-CRLDND.exe, T-RBYDND.exe (For Nordic model) T-RBYDEU.exe (For Pan Euro model) T-AMBDGR.exe (For Germany model) 2. Connect the USB Memory Drive to the USB port of your PC. Copy the file onto the USB Memory Drive. 3. Go to the USB Memory Drive and then double click the file. 4. Press the Install button. 5. Unzipping is in progress and the program will close automatically when the installation is complete. 6. A folder containing the firmware files has been added to the USB memory drive. File Name : T-AMBDFR.exe, T-CRLDFR.exe, T-PRPDFR.exe, T-SPNDFR.exe (For France model) T-AMBDND.exe, T-CRLDND.exe, T-RBYDND.exe (For Nordic model) T-RBYDEU.exe (For Pan Euro model) T-AMBDGR.exe (For Germany model) 7. Safely disconnect the USB memory drive by right clicking the green check mark on the taskbar and then left click Safely Remove. Caution!! The USB device should have only one folder.

3 2 Connecting the USB device to the TV. Insert USB to WISELINK on Side TV. HDMI IN4 If USB is inserted perfectly, the below OSD is showed up. if not, disconnect and re-connect USB to WISELINK port. Use and Enter button on remote control, Select No. New portable device connected. Play multimedia files using WISELINK? Device : TURBO II Yes No 3 Running the software upgrade file. Press the MENU button. Press the,, and ENTER buttons to select Setup By USB. The software upgrade start screen appears, Current Version 2008/01/01_ BY USB BY Channel Standby Mode Upgrade Alternative Software : On 2008/01/01_ Move Enter Return O Another Method Press the SOURCE button on the TV and the POWER button on the remote control at the same time. The software upgrade screen appears. Press the buttons in the Standby state.

4 Wait about 30 seconds and check S/W version on OSD. Press the ENTER button to select OK. If the TV fails to recognize the upgraded fi le, check the fi les in the software folder and copy the fi les to the folder of the USB memory again. Warning!! Please be careful to not disconnect the power or remove the USB drive while upgrades are being applied. Scanning for USB... It may take up to 30 seconds. Upgrade version XXXX to version XXXX? The system will be reset after upgrade. OK Cancel During upgrading, do not disconnect USB (Wait) If upgrade is stopped, please re-try. HDMI IN4 Upgrading now. Please do not disconnect USB before upgrade is completed. The TV will turn off and turn on automatically after completing the S/W upgrade. You can check power off/on with LED on the front. (When power is on, LED is blinking.) Upgrade is completed. Power will turn off in 3 seconds and turn on again automatically. LED Warning!! After or while upgrading, if the TV freezes for more than 10 minutes or does not turn on, disconnect and reconnect the power cord.however, if the TV still has a problem, contact a Samsung Customer center. 4 Verifying the software upgrade. Select of Setup menu on OSD. Press the info button to check fi rmware version. You can see the micom version: T-XXXDFRC-XXXX Setup Energy Saving PIP : Off Disconnect USB.

5 Contact SAMSUNG WORLDWIDE If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care centre. Country Customer Care Centre Web Site AUSTRIA SAMSUNG ( , 0.07/min) BELGIUM CZECH RE- PUBLIC SAMSUNG ( ) Distributor pro Českou republiku: Samsung Zrt., česká organizační složka, Oasis Florenc, Sokolovská394/17, , Praha 8 DENMARK 8 - SAMSUNG ( ) EIRE FINLAND FRANCE 3260 'dites' SAMSUNG ( 0,15/Min) ( 0.15/Min) GERMANY SAMSUNG ( , 0.14/Min) HUNGARY SAMSUNG ( ) ITALIA SAMSUNG ( ) LUXEMBURG NETHERLANDS SAMSUNG ( , 0.10/Min) NORWAY 3 - SAMSUNG ( ) POLAND SAMSUNG (172678) PORTUGAL SAMSUNG ( ) SLOVAKIA SAMSUNG ( ) SPAIN SAMSUNG ( ) SWEDEN SAMSUNG ( ) SWITZERLAND SAMSUNG ( , CHF 0.08/min) U.K 0845 SAMSUNG ( ) TURKEY ESTONIA LATVIA LITHUANIA KAZAHSTAN KYRGYZSTAN RUSSIA TADJIKISTAN UKRAINE UZBEKISTAN