TECHNICAL REVISION May Process Industry Practices Piping. PIP PNCM0002 Piping Material Specifications Line Class Index
|
|
|
- Vanessa Bates
- 8 years ago
- Views:
Transcription
1 May 2013 Process Industry Practices Piping Piping Specifications Line Index
2 PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical requirements in the existing standards of major industrial users, contractors, or standards organizations. By harmonizing these technical requirements into a single set of Practices, administrative, application, and engineering costs to both the purchaser and the manufacturer should be reduced. While this Practice is expected to incorporate the majority of requirements of most users, individual applications may involve requirements that will be appended to and take precedence over this Practice. Determinations concerning fitness for purpose and particular matters or application of the Practice to particular project or engineering situations should not be made solely on information contained in these materials. The use of trade names from time to time should not be viewed as an expression of preference but rather recognized as normal usage in the trade. Other brands having the same specifications are equally correct and may be substituted for those named. All Practices or guidelines are intended to be consistent with applicable laws and regulations including OSHA requirements. To the extent these Practices or guidelines should conflict with OSHA or other applicable laws or regulations, such laws or regulations must be followed. Consult an appropriate professional before applying or acting on any material contained in or suggested by the Practice. This Practice is subject to revision at any time. Process Industry Practices (PIP), Construction Industry Institute, The University of Texas at Austin, 3925 West Braker Lane (R4500), Austin, Texas PIP Member Companies and Subscribers may copy this Practice for their internal use. Changes or modifications of any kind are not permitted within any PIP Practice without the express written authorization of PIP. Authorized Users may attach addenda or overlays to clearly indicate modifications or exceptions to specific sections of PIP Practices. Authorized Users may provide their clients, suppliers and contractors with copies of the Practice solely for Authorized Users purposes. These purposes include but are not limited to the procurement process (e.g., as attachments to requests for quotation/ purchase orders or requests for proposals/contracts) and preparation and issue of design engineering deliverables for use on a specific project by Authorized User s client. PIP s copyright notices must be clearly indicated and unequivocally incorporated in documents where an Authorized User desires to provide any third party with copies of the Practice. PRINTING HISTORY August 1996 Issued August 1999 Revision May 2006 Complete Revision June 1998 Revision November 1999 Revision August 2010 Technical Revision February 1999 Complete Revision May 2005 Complete Revision May 2013 Technical Revision Not printed with State funds
3 May 2013 Process Industry Practices Piping Piping Specifications Line Index Table of Contents 1. Introduction Purpose Scope Piping Specifications Line Index... 2 Process Industry Practices Page 1 of 7
4 Piping Specifications Line Index May Introduction 1.1 Purpose This Practice provides a listing of the PIP Piping Specifications. 1.2 Scope This Practice describes the basic characteristics of each PIP Specification. Each specification listed is described by pressure class, primary material, corrosion allowance, service type, and joint construction. 2. Piping Specifications Line Index Carbon and Low Alloy Steels Joint Construction 1CA1S Impact Tested Carbon Steel 0.063" (1/16") Process SW BW & FLG 3CA1S Impact Tested Carbon Steel 0.063" (1/16") Process SW BW & FLG 6CA1S Impact Tested Carbon Steel 0.063" (1/16") Process SW BW & FLG 1CB1S Killed Carbon Steel 0.063" (1/16") Process SW BW & FLG 3CB1S Killed Carbon Steel 0.063" (1/16") Process SW BW & FLG 6CB1S Killed Carbon Steel 0.063" (1/16") Process SW BW & FLG 9CB1S Killed Carbon Steel 0.063" (1/16") Process SW BW & FLG 15CB1S Killed Carbon Steel 0.063" (1/16") Process SW BW & FLG 1CB2S Killed Carbon Steel (1/8 ) Process SW BW & FLG 3CB2S Killed Carbon Steel (1/8 ) Process SW BW & FLG 6CB2S Killed Carbon Steel (1/8 ) Process SW BW & FLG 9CB2S Killed Carbon Steel (1/8 ) Process SW BW & FLG 15CB2S Killed Carbon Steel (1/8 ) Process SW BW & FLG 1CB3S Killed Carbon Steel (3/16 ) Process SW BW & FLG 12CG0T Galvanized Carbon Steel None Utilities SW BW & FLG 1CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 3CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 6CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 9CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 15CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 6CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Steam/Condensate SW BW & FLG 9CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Steam/Condensate SW BW & FLG 15CJ1S /4 Cr 1/2 Mo 0.063" (1/16") Steam/Condensate SW BW & FLG Process Industry Practices Page 2 of 7
5 Piping Specifications Line Index May 2013 Carbon and Low Alloy Steels (continued) 1CK1S /4 Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 3CK1S /4 Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 6CK1S /4 Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 9CK1S /4 Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 15CK1S /4 Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 1CL1S Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 3CL1S Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 6CL1S Cr 1/2 Mo 0.063" (1/16") Process SW BW & FLG 9CL1S Cr 1/2 Mo (1/16) Process SW BW & FLG 15CL1S Cr 1/2 Mo (1/16) Process SW BW & FLG 1CM1S Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 3CM1S Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 6CM1S Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 9CM1S Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 15CM1S Cr 1 Mo 0.063" (1/16") Process SW BW & FLG 1CS1B Carbon Steel 0.063" (1/16") Liquid Bulk Transfer BW BW & FLG 1CS1B Carbon Steel (1/16 ) Process BW BW & FLG 3CS1B Carbon Steel (1/16") Process BW BW & FLG 12CS1G Carbon Steel (1/16 ) Utility (Air & Water) THD Grooved 12CS1T Carbon Steel 0.063" (1/16") Utility (Air & Water) THD BW & FLG 1CS1S Carbon Steel 0.063" (1/16") Process SW BW & FLG 3CS1S Carbon Steel 0.063" (1/16") Process SW BW & FLG 12CS2T Carbon Steel 0.125" (1/8") Utility (Air & Water) THD BW & FLG 3CS2B Carbon Steel (1/8") Process BW BW & FLG 1CS2S Carbon Steel 0.125" (1/8") Process SW BW & FLG 3CS2S Carbon Steel 0.125" (1/8") Process SW BW & FLG 1CS1S Carbon Steel 0.063" (1/16") Steam/Condensate SW BW & FLG 3CS1S Carbon Steel 0.063" (1/16") Steam/Condensate SW BW & FLG 6CS1S Carbon Steel 0.063" (1/16") Steam/Condensate SW BW & FLG 9CS1S Carbon Steel 0.063" (1/16") Steam/Condensate SW BW & FLG 15CS1S Carbon Steel 0.063" (1/16") Steam/Condensate SW BW & FLG Fiber Reinforced Plastics (FRPs) and Resins 1FE0A RTR None 1FV0A RTR None Process & Utilities (Aboveground & Underground) Process & Utilities (Aboveground & Underground) Adhesive & FLG Adhesive & FLG Process Industry Practices Page 3 of 7
6 Piping Specifications Line Index May 2013 Jacketed Piping 1CS1J Carbon Steel (1/16 ) Process (Steam) Jacketed 3CS1J Carbon Steel 0.063" (1/16") Process (Steam) Jacketed 1SA0J /304L SS None Process (Steam) Jacketed 3SA0J /304L SS None Process (Steam) Jacketed 1SA0J /304L SS None Process (Hot Oil) Jacketed 3SA0J /304L SS None Process (Hot Oil) Jacketed 1SD0J /316L SS None Process (Steam) Jacketed 3SD0J /316L SS None Process (Steam) Jacketed 1SD0J /316L SS None Process (Hot Oil) Jacketed 3SD0J /316L SS None Process (Hot Oil) Jacketed Lined or Internally Coated 120M psi 1LK0F LP0F LT0F Nickel or Nickel Alloys Cement Lined Ductile Iron PVDF Lined Carbon Steel Polypropylene Lined Carbon Steel PTFE Lined Carbon Steel None Firewater Mechanical Joints None Process Flanged Only None Process Flanged Only None Process Flanged Only 1NA0B Alloy C2000 None Process (PTFE) BW BW & FLG 1NB0B Alloy B2 None Process (PTFE) BW BW & FLG 3NB0B Alloy B2 None Process BW BW & FLG 1NC0B Alloy C276 None Process (PTFE) BW BW & FLG 3NC0B Alloy C276 None Process (PTFE) BW BW & FLG 1NC0B Alloy C276 None Process BW BW & FLG 3NC0B Alloy C276 None Process BW BW & FLG 1NU0B Alloy 20 None Process (PTFE) BW BW & FLG 3NU0B Alloy 20 None Process (PTFE) BW BW & FLG 1NU0S Alloy 20 None Process SW BW & FLG 3NU0S Alloy 20 None Process SW BW & FLG 1NM0B Alloy 400 None Process (PTFE) BW BW & FLG 3NM0B Alloy 400 None Process (PTFE) BW BW & FLG 1NM0S Alloy 400 None Process SW BW & FLG 3NM0S Alloy 400 None Process SW BW & FLG 50NM0L01 Thru 600 Alloy 400 None Process Tubing COMP FTG N/A 50NM0L02 Thru 600 Alloy 400 None Process Tubing (PTFE) COMP FTG N/A 1NM0B Alloy 400 None Oxygen BW BW & FLG 3NM0B Alloy 400 None Oxygen BW BW & FLG 6NM0B Alloy 400 None Oxygen BW BW & FLG Process Industry Practices Page 4 of 7
7 Piping Specifications Line Index May 2013 Plastics 12PD0H psi HDPE None Fire Water Heat Fusion & FLG 12PD0H psi HDPE None Utility Heat Fusion & FLG 1PP0H psi Polypropylene (Copolymer) None Process Heat Fusion & FLG 1PU0C psi CPVC None Process Cement, Solvent & FLG 1PV0C psi PVC None Process Cement, Solvent & FLG Stainless (Hi-Alloy) Steels 1SA0S /304L SS None Process SW BW & FLG 3SA0S /304L SS None Process SW BW & FLG 6SA0S /304L SS None Process SW BW & FLG 9SA0S /304L SS None Process SW BW & FLG 15SA0S /304L SS None Process SW BW & FLG 1SA0B /304L SS None Lube Oil BW BW & FLG 3SA0B /304L SS None Lube Oil BW BW & FLG 6SA0B /304L SS None Lube Oil BW BW & FLG 1SA0B /304L SS None Process BW BW & FLG 3SA0B /304L SS None Process (PTFE) BW BW & FLG 6SA0B /304L SS None Process (PTFE) BW BW & FLG 1SA0B /304L SS None Process BW BW & FLG 3SA0B /304L SS None Process BW BW & FLG 1SA0S /304L SS None Process (PTFE) SW BW & FLG 3SA0S /304L SS None Process (PTFE) SW BW & FLG 50SA0L01 Thru /304L SS None Process Tubing COMP FTG N/A 50SA0L02 Thru /304L SS None Process Tubing (PTFE) COMP FTG N/A 1SA0S /304L SS None Low Temp SW BW & FLG 3SA0S /304L SS None Low Temp SW BW & FLG 6SA0S /304L SS None Low Temp SW BW & FLG 1SA0S /304L SS None Cryogenic SW BW & FLG 3SA0S /304L SS None Cryogenic SW BW & FLG 6SA0S /304L SS None Cryogenic SW BW & FLG 1SA0B /304L SS None Oxygen BW BW & FLG 3SA0B /304L SS None Oxygen BW BW & FLG 6SA0B /304L SS None Oxygen BW BW & FLG Process Industry Practices Page 5 of 7
8 Piping Specifications Line Index May 2013 Stainless (Hi-Alloy) Steels (continued) 3SC0S H SS None Process SW BW & FLG 6SC0S H SS None Process SW BW & FLG 9SC0S H SS None Process SW BW & FLG 15SC0S H SS None Process SW BW & FLG 6SD0B /316L SS None Process BW BW & FLG 1SD0B /316L SS None Process BW BW & FLG 3SD0B /316L SS None Process (PTFE) BW BW & FLG 6SD0B /316L SS None Process (PTFE) BW BW & FLG 1SD0B /316L SS None Process BW BW & FLG 3SD0B /316L SS None Process BW BW & FLG 1SD1B /316L SS 0.063" (1/16") Process (PTFE) BW BW & FLG 3SD1B /316L SS 0.063" (1/16") Process (PTFE) BW BW & FLG 1SD1B /316L SS 0.063" (1/16") Process BW BW & FLG 3SD1B /316L SS 0.063" (1/16") Process BW BW & FLG 1SD0S /316L SS None Process SW BW & FLG 3SD0S /316L SS None Process SW BW & FLG 6SD0S /316L SS None Process SW BW & FLG 9SD0S /316L SS None Process SW BW & FLG 15SD0S /316L SS None Process SW BW & FLG 1SD0S /316L SS None Process (PTFE) SW BW & FLG 3SD0S /316L SS None Process (PTFE) SW BW & FLG 50SD0L01 Thru /316L SS None Process Tubing COMP FTG N/A 50SD0L02 Thru /316L SS None Process Tubing (PTFE) COMP FTG N/A 6SJ0S SS None Process SW BW & FLG 9SJ0S SS None Process SW BW & FLG 15SJ0S SS None Process SW BW & FLG 6SJ1S SS 0.063" (1/16") Process SW BW & FLG 9SJ1S SS 0.063" (1/16") Process SW BW & FLG 15SJ1S SS 0.063" (1/16") Process SW BW & FLG 6SK0S H SS None Process SW BW & FLG 9SK0S H SS None Process SW BW & FLG 15SK0S H SS None Process SW BW & FLG 6SK1S H SS 0.063" (1/16 ) Process SW BW & FLG 9SK1S H SS 0.063" (1/16 ) Process SW BW & FLG 15SK1S H SS 0.063" (1/16 ) Process SW BW & FLG Process Industry Practices Page 6 of 7
9 Piping Specifications Line Index May 2013 Stainless (Hi-Alloy) Steels (continued) 1SP1S Duplex SS 0.063" (1/16") Process SW BW & FLG 3SP1S Duplex SS 0.063" (1/16") Process SW BW & FLG 6SP1S Duplex SS 0.063" (1/16") Process SW BW & FLG 9SP1S Duplex SS 0.063" (1/16") Process SW BW & FLG 15SP1S Duplex SS 0.063" (1/16") Process SW BW & FLG 1SV0S SMO None Process (PTFE) SW BW & FLG 3SV0S SMO None Process (PTFE) SW BW & FLG Zirconium 1MZ0B Zirconium None Process BW BW & FLG Process Industry Practices Page 7 of 7
COMPLETE REVISION May 2006. Process Industry Practices Piping. PIP PNCM0002 Piping Material Specifications Line Class Index
Piping Piping Specifications Line Index PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort to minimize the cost of process industry facilities, this Practice has been prepared from the technical
ASME Packaged Indirect Fired Water Heater
Utilizes Or HTHW To Heat Domestic Water, Semi-Instantaneous or Storage Type Model BW Features Reliable Only high grade materials used in construction to ensure long operating life Hydrastone cement lining
API Upstream Standard Development Update - Supply Chain Management. Rick Faircloth
API Upstream Standard Development Update - Supply Chain Management Rick Faircloth o Overview of API 20 Series Supply Chain Management Overview of API 20 Series Supply Chain API formed in 1919 as a national
Sample - No Commercial Use
COMPLETE REVISION October 2010 Electrical PIP ELSSG01 Design and Fabrication of Low-Voltage Metal-Enclosed AC Power Circuit Breaker Switchgear PURPOSE AND USE OF PROCESS INDUSTRY PRACTICES In an effort
60.12. Depend-O-Lok FxE Expansion Coupling. System No. Submitted By Spec Sect Para Location Date Approved Date. DEPEND-O-LOK FxE EXPANSION COUPLING
60.1 D-O-L FxE expansion couplings are a bolted, split-sleeve design that provides for expansion and contraction at the coupled joint. These couplings are furnished with restraint rings that, when affixed
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS
SECTION 02720 SANITARY SEWER AND STORM DRAIN SYSTEMS PART 1 GENERAL 1.01 SECTION INCLUDES A. The requirements for pipe material and installation in sewer and drainage collection systems. All materials
Connecticut Technical High School System Connecticut State Department of Education PLUMBING APPRENTICESHIP INFORMATION PACKET 2012-13
Connecticut Technical High School System Connecticut State Department of Education PLUMBING APPRENTICESHIP INFORMATION PACKET 2012-13 Covering the following licenses: P-2 Plumbing Mechanic J-2 Pump Servicer
For the transfer of : Oil Solvents Liquid Chemicals Acids Cryogenic Products Vapour
Eteha bv Flextraco Manufacturer of s Flextraco Manufacturer of s For the transfer of : Oil Solvents Liquid Chemicals Acids Cryogenic Products Vapour Flextraco Composite Hoses - 20 Company Information Flextraco
Double Containment Piping Systems
Double Containment Piping Systems I N D U S T R I A L S Y S T E M S YOUR INDUSTRIAL SPECIALIST Guardian Vinyl Double Containment Systems Encase Acid Waste PP Double Containment System CustomGuard Double
Distributor of Industrial Pipe, Valves, & Fittings 351 Smith Street Perth Amboy NJ 08861
Distributor of Industrial Pipe, Valves, & Fittings 351 Smith Street Perth Amboy NJ 08861 Our History Established in 1978 Located in Perth Amboy NJ at the crossroads of several major NJ/NY roadways and
WATER & SEWER CORROSIVE RESISTANT PRODUCTS
WATER & SEWER CORROSIVE RESISTANT PRODUCTS The Standard of Excellence in the Industry CASING SPACERS COUPLINGS & FLANGE COUPLING ADAPTERS REPAIR CLAMPS DUCTILE IRON SADDLES STAINLESS STEEL SADDLES TAPPING
DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT. Jim Riley, Texas A&M University February 10, 2015
DISTRIBUTION PIPING MATERIALS: BUILDING HYDRONIC SYSTEM MANAGEMENT Jim Riley, Texas A&M University February 10, 2015 Piping at Texas A&M 2 History of Distribution Piping at Texas A&M Concrete reinforced
Steam System Best Practices Condensate System Piping
Steam System Best Practices Condensate System Piping Summary The best method for improving steam system energy efficiency, reducing chemical costs, and reducing make-up water costs is to return the maximum
GPD Rubber Press Seals
GPD Rubber Press Seals Leading in in ideas SYSTEM-TECHNIK GPD Rubber Press Seals Design Available with a rubber thickness of 30 mm for sealing against non-pressing water and a rubber thickness of 60 mm
Morrison Bros. Co. General Product Specifications
Morrison Bros. Co. General Product Specifications Tank Mounted Spillbox The spill containment device is manufactured to contain spills and drips that may occur at the fill point on aboveground storage
TECHNO Multi-Purpose Check Valves for Industry
Multi-Purpose Check Valves for Industry THE SHORT FORM (SF) WAFER IS THE PERFECT DESIGN FOR AIR SERVICE AND LIGHT DUTY LIQUID APPLICATIONS. AVAILABLE IN SIZES 1-72 MALE THREADED ENDS, GROOVED ENDS, PLAIN
INDEX. Sec. No. Items Page Nos.
INDEX Sec. No. Items Page Nos. 1. Types of Pipe............... MSSP- 2 2. Concrete Pipe............... MSSP- 2 thru MSSP-3 3. ABS and PVC Truss Pipe............... MSSP- 3 4. ABS and PVC Solid Wall Pipe...............
An SPX Process Equipment Operation. Universal II Industrial Series Rotary Positive Displacement ECP Pumps
An SPX Process Equipment Operation Universal II Industrial Series Rotary Positive Displacement ECP Pumps New levels of performance. Reduced operational and maintenance costs. For more than half a century,
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
TG 105 ALLOWABLE PIPE SIZE, CLASS AND MATERIALS FOR WATER MAINS TECHNICAL GUIDELINE. Manager Asset Management SOUTH AUSTRALIAN WATER CORPORATION
TG 105 SOUTH AUSTRALIAN WATER CORPORATION TECHNICAL GUIDELINE ALLOWABLE PIPE SIZE, CLASS AND MATERIALS FOR WATER MAINS Issued by: Manager Asset Management Issue Date: SA WATER 2007 This document is copyright
MATERIAL SPECIFICATION MANUAL
MATERIAL SPECIFICATION MANUAL Created Date: 01/25/05 (JJS) Last Revised Date: 11/29/10 (JJS) When working with Pinellas County (EES), suppliers and contractors shall actively follow EES's published material
NEW CONNECTION INDUSTRIAL PRODUCTS NC.10V NC.20V NC.30V. NC. SD.10 NC. SD.20 NC. F.Clamp
Repair and Construction. Complete stainless steel pipe repair clamps to repair cracks, fractures, pin holes, torn sockets or welded tees, broken asbest-cement pipe coupling and more. Available for all
PVC Pipe Restriction Law and Legislation 1) NYS PVC Pipe Restriction Law (Repealed)
PVC Pipe Restriction Law and Legislation 1) NYS PVC Pipe Restriction Law (Repealed) * 246. Uses of standard piping materials. 1. Building sewers under public ways. Building sewers under public ways shall
Trade Standard of Town Construction in PRC
CJ/T 136-2007 Trade Standard of Town Construction in PRC CJ/T 1 36 2007 Replaces CJ/T 136 2001 Steel pipes of lining plastic for water supply Date of issue: Jan. 17 th, 2007 Date of enforce: Sep. 1 st,
DOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
www.klmtechgroup.com TABLE OF CONTENTS
Page : 1 of 216 TABLE OF CONTENTS 1 GENERAL 2 1.1 Scope 2 1.2 Code and s 2 1.3 Pressure-Temperature Design 6 1.4 Pipe Wall Thickness Allowance 7 1.5 Ends 8 1.6 Units 8 1.7 Language 9 2 MATERIAL 9 2.1 General
RUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
SECTION 02401 - SANITARY SEWER PIPE
PART 1 - GENERAL 1.1 DESCRIPTION A. The WORK under this Section includes providing all labor, materials, tools and equipment necessary for furnishing and installing sanitary sewer pipe, in accordance with
Pipe Protection Tape System
Pipe Protection Tape System PASCO All Weather Pipe Protection Tape is a pure physical barrier that is moisture proof, inert and non-conducting. Whether the need is to protect overhead piping in industrial
INDIAN STANDARDS (BIS) ON WELDING
** IS 82:957 Glossary of terms relating to welding and cutting of Sep 2008 metals 2 IS 83:986 Scheme of symbols for welding (revised) Sep 2008 3 IS 84:2004 Covered electrodes for manual metal arc welding
NDP-50 Specifications
NDP-50 Specifications Port Dimensions Intake & discharge connection: (164 GPM Max.) Polypropylene (PPG) 2" ANSI B16.5 #150 Kynar (PVDF) 2" ANSI B16.5 #150 Aluminum (ADC-12) 2" ANSI B16.5 #150 (with tapped
Ve-Lock manufactures Needle Valves from Solid bar stock Materials & all parts details are as below:
Needle Valves : - Needle valves have a slender, tapered point at the end of the valve stem that is lowered through the seat to restrict or block flow. Fluid flowing through the Needle valve turns 90 degrees
FILTRATION SOLUTIONS PhARmAceUTIcAL manufacturing FILTRATION SPecIALISTS
FILTRATION SOLUTIONS Pharmaceutical Manufacturing filtration specialists Delivering quality filtration products As one of Europe s leading manufacturers of process filters, Amazon Filters is able to offer
Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges 1
Designation: F 1545 97 e1 An American National Standard Standard Specification for Plastic-Lined Ferrous Metal Pipe, Fittings, and Flanges 1 This standard is issued under the fixed designation F 1545;
REGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
Facility Operations Physical Safety Guidance Document
Facility Operations Physical Safety Guidance Document Title: Guide on Pipe Identification Standards (ASME A13.1-1996) Original Date: December 18, 2000 Section: 4.0 Facility Operations Revised Date: Number:
SECTION 02630 STORM DRAINAGE SYSTEM
SECTION 02630 PART 1 - GENERAL 1.01 DESCRIPTION A. Section includes specifications for storm drainage systems including modifications and connections to existing storm drainage systems. 1.02 REFERENCE
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
Relining of Water Mains with. Flexible High Pressure Pipelines. Raedlinger Primus Line, Inc. Ivan Zubiaga Executive Vice President 2014
Relining of Water Mains with Flexible High Pressure Pipelines Raedlinger Primus Line, Inc. Ivan Zubiaga Executive Vice President 2014 Aging water main infrastructure The American Society of Civil Engineers
Bypass level indicator With magnetic display Model BNA
Level measurement Bypass level indicator With magnetic display Model BNA WIKA data sheet LM 10.01 Applications Continuous level indication without power supply Indication of the level proportional to height
Industrial Piping Systems
Industrial Piping Systems Proline Ultra Proline Super Proline Chem Proline ProVent Welding Equipment 6-2012 Industrial Water and Chemical Transport Solutions Asahi/America pioneered the market for thermoplastic
High School Graduation years 2013, 2014, 2015. Unit/Standard Number
1 Secondary Task List 100 INTRODUCTION TO HVAC 101 Identify HVAC systems. 102 Describe career opportunities in the HVAC profession. 103 Demonstrate awareness of the occupational requirements. 104 Explain
HOSES COMPOSITE HOSES & FITTINGS HOSES. Pag. 5J533 TANK CLEANING 10 BAR (150 PSI) BS5842 ARRETE' ADR ANNEXE 1
COMPOSITE S & FITTINGS Pag. S S 5J533 TANK CLEANING 10 BAR (150 PSI) 5J551 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT - 10 BAR (150 PSI) 5J553 CHEMICALS SUCTION AND DISCHARGE - STANDARD WEIGHT -
Seawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D.
OSNA -10 Copper-Nickel Lined Pipes Seawater corrosion resistant piping systems for large diameters up to 100 / 2.5 metres O.D. KME Germany AG & Co. KG Copper-Nickel Lined Pipes [GB] Member of the KME Group
Variable V Area Flowmeter Rotameter The Original
Variable V Area Flowmeter Rotameter The Original 99 Washington Street Melrose, MA 02176 Phone 781-665-1400 Toll Free 1-800-517-8431 Visit us at www.testequipmentdepot.com precise measurement of liquids
Application Guide. Compensators Hose Assemblies Expansion Joints FLEX-WELD INCORPORATED FLEX-WELD.COM. Manufactured By:
Compensators Hose Assemblies Expansion Joints Manufactured By: FLEX-WELD INCORPORATED FLEX-WELD.COM What we need to know... A. Physical / System Parameters 1 Size of Assembly: Measure Pipe size (ID) of
Maximizing Boiler Plant Efficiency. Presenter: Dan Watkins, LEED BD+C Sales Engineer Bornquist, Inc.
Maximizing Boiler Plant Efficiency Presenter: Dan Watkins, LEED BD+C Sales Engineer Bornquist, Inc. Efficient Boiler Design Boiler Types Efficiency Definition Non-Condensing Condensing Maximizing Efficiency
VIKING UNIVERSAL SEAL PUMPS. Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Seal Options. Operating Range1: Nominal Flow Rates:
VIKING UNIVERSAL SEAL PUMPS Section 630 Page 630.1 Issue G Heavy-Duty, Foot-Mounted Internal Gear Pumps With Multiple Options Operating Range1: Cast Iron Series 124A/AE, 4124A/AE, 4124B, 324A, 4324A, 224A/AE,
THERMOPLASTIC LINERS FOR REHABILITATION OF OIL FLOWLINE AND WATER INJECTION LINES, INTEGRITY AND SERVICE LIFE
THERMOPLASTIC LINERS FOR REHABILITATION OF OIL FLOWLINE AND WATER INJECTION LINES, INTEGRITY AND SERVICE LIFE Vincenzo Savino [1] Mauyed S. Mehdi [1] Abdullah K. Al-Dossary [2] [1] Saudi Aramco, Consulting
1. Conductivity < 15 micro ohms/cm 2. ph of 6.0 to 9.0 3. Nonvolatile TOC content < 1.0 ppm
PART 1: GENERAL 1.01 Purpose: A. This standard is intended to provide useful information to the Professional Service Provider (PSP) to establish a basis of design. The responsibility of the engineer is
08.08 Vic-Check Valves
The check valves are a product of computer-assisted innovative engineering with quality features including a new hydrodynamically efficient profile. The Vic-Check valve utilizes a spring-assisted, single-disc
Kämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
SECTION 02763 POINT REPAIRS TO SANITARY SEWERS. A. Repairs to existing sewer lines by replacing short lengths of failed pipe.
SECTION 02763 PART 1 G E N E R A L 1.01 SECTION INCLUDES A. Repairs to existing sewer lines by replacing short lengths of failed pipe. 1.02 UNIT PRICES A. Measurement for point repairs is on a unit price
Technical information
Technical rmation ZA.VE.RO. INDUSTRIAL VALVES 0 CONSTRUCTION STANDARDS API - American Petroleum Institute Spec. 6A Spec. 6D Spec. RP6F Spec. 6FA Std. 598 Std. 605 Std. 607 Specification for wellhead and
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
This will also provide you with the knowledge to insure long life for your Investment
CONDUIT PIPE DRYING This Presentation will guide you to why systems fail! This will also provide you with the knowledge to insure long life for your Investment Drainable and Dryable System Design Trough
Material Failures in Fire Protection Systems
Material Failures in Fire Protection Systems March 4, 2014 University of Central Florida (UCF), Orlando, FL Jeff Pfaendtner Materials/Metallurgical Engineer Crane Engineering Inc., Plymouth, MN Crane Engineering
AdBlue. Technical Leaflet
Technical Leaflet M 6221 e November 2006 Page 1 of 6 = Registered trademark of Verband der Automobilindustrie AdBlue Very pure NO x -reduction agent for Diesel engines equipped with SCR catalysts. AdBlue
MaxCell Technical Manual Design Parameters
MaxCell Technical Manual Design Parameters Breaking Strength by Product Style, lbs Product Style Standard MaxCell Fire Resistant MaxCell Test Method 4 Cell 2,750 2,200 ASTM D 5 Bellcore 5 5.. Cell 2,50
FLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
Rubber-to-Metal Bonding
The Delta Rubber Thought Leadership Series Rubber-to-Metal Bonding Part Art, Part Science By Kevin Violette The Delta Rubber Company Automotive and industrial manufacturers are increasingly are turning
TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe. 4 Alloy Pipe & Tube. 6 Chrome-Moly Pipe. 7 Low-Temp Pipe
PRODUCT CATALOG TABLE OF CONTENTS 2 Heavy-Wall Seamless & Welded Carbon Steel Pipe 4 Alloy Pipe & Tube 6 Chrome-Moly Pipe 7 Low-Temp Pipe 9 Services amerpipe.com 1.800.316.5737 sales@amerpipe.com 18333
During severe flood events, such as those
Recommended Practice for Home Heating Oil Tank Flood Resistance During severe flood events, such as those occurring from Hurricane Irene and Super- Storm Sandy, many coastal and low elevation inland areas
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications. Company Overview
Stockists of valves, actuators, tubes and fittings for instrument and mechanical applications Company Overview Delivering promises. Since our foundation in 1980, PCE has grown to become an international
SPECIFICATIONS FOR STEEL PIPE
SPECIFICATIONS FOR STEEL PIPE Published pipe standards serve three functions. 1. They dictate manufacturing and testing requirements and prescribed methods of measuring the required mechanical and physical
STRONG FLEXIBLE. HyperPure PURE
STRONG FLEXIBLE PURE TM HyperPure TM HyperPure 1954 HDPE (HIGH DENSITY POLYETHYLENE) TUBE FIRST TESTED 1965 ENGEL PATENT, PEXa 1967 PEXa PRODUCTION FOR POTABLE WATER SYSTEMS BIMODAL POLYETHYLENE RAISED
High Performance Coating Systems THIOKOL. P r i m a r y a n d S e c o n d a r y C o n t a i n m e n t
THIOKOL High Performance Coating Systems FNEC 2515 RLP 2378+ P r i m a r y a n d S e c o n d a r y C o n t a i n m e n t The name THIOKOL has long been synonymous with elastomeric polysulfide based coatings
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀
倀 䰀 唀 䴀 䈀 䤀 一 䜀 刀 䄀 䤀 一 圀 䄀 吀 䔀 刀 匀 夀 匀 吀 䔀 䴀 匀 眀 眀 眀 最 攀 渀 漀 瘀 愀 瀀 爀 漀 搀 甀 挀 琀 猀 挀 漀 洀 㠀 ⴀ 㔀 ⴀ 㜀 㐀 㠀 㠀 September 2015 R.F. Williams, Michigan Master Plumber, License No. 04287 (left) R.M. Williams, Michigan
Baumann 24003 3 Way Bronze or Stainless Steel Control Valve
Product Bulletin D1039X012 24003 Valve Baumann 24003 3 Way Bronze or Stainless Steel Control Valve 3 Way Rugged Industrial Control Valve For Mixing and Diverting Applications The Baumann 24003 3 way control
HDPE Pipe Joining System
HDPE Pipe Joining System The System The fast, easy, and economical way to mechanically join HDPE pipe. Fast, easy bolted connection Faster installation Easy to remove and rotate pipe for increased pipe
Valves, Automation & Controls. series 84 /99 HIGH PERFORMANCE 3-PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE. www.sharpevalves.
Valves, Automation & Controls series 8 /99 & FS8 /FS99 HIGH PERFORMANCE -PIECE BALL VALVE REDUCE & FULL PORT, STANDARD & FIRE SAFE www.sharpevalves.com Design & Features SHARPE VALVES - SERIES 8/99 Fire
SECTION 33 12 19 FIRE HYDRANTS
SECTION 33 12 19 FIRE HYDRANTS PART 1: GENERAL 1.01 SCOPE A. Fire hydrants. B. Adjustment of fire hydrants and gate valves. 1.02 SUBMITTALS A. Conform to requirements of Section 01 33 00 - Submittals.
SPECIALTY FIBER OPTIC CABLE. Downhole Sensing Subsea
SPECIALTY FIBER OPTIC CABLE Specialty Fiber Optic Cable Customers around the world benefit from using AFL fiber optic cable and components for downhole sensing and subsea umbilicals. With its patented
Econosto UK. www.econosto.uk.com. LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345
LEICESTER Econosto UK Ltd Cambridge Road Whetstone Leicester LE8 6ZG T: +44 (0)116 272 7300 F: +44 (0)116 272 7345 ABERDEEN Econosto UK Ltd Blackness Road Altens Industrial Estate Aberdeen AB12 3LH T:
Asbestos WHAT TO DO? Studies of people who were exposed to high levels of asbestos in factories and shipyards, are at increased risk of:
Asbestos WHAT TO DO? What Is Asbestos? Asbestos is mineral fiber. It can be positively identified only with a special type of microscope. There are several types of asbestos fibers. In the past, asbestos
HOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
Style 07 Zero Flex Rigid Coupling. Style 75 Flexible Coupling. Style 77 Flexible Coupling 11. Description
Style 07 Zero Flex Rigid Coupling The unique angled pad design adjusts to standard pipe tolerances to positively clamp the pipe to resist flexural and torsional loads. Working pressures are based on standard
Many Products...One Source
PRESSURE GAUGES Dedicated Sales Rep for Your Area 97%Fill Rate Shipping within 24 Hours State of the Art Warehouse System Technical Support Quality Control Program 25 Whaley Avenue Milverton, Ontario N0K
List of Frequently Utilized Storage Tank Standards and Practices
List of Frequently Utilized Storage Tank Standards and Practices Below is a list of frequently used storage tank standards and practices from organizations that are referenced in 25 PA Code, Chapter 245.
Recommended Fuel Piping Specification For UPP Piping, UL-971
Recommended Fuel Piping Specification For UPP Piping, UL-971 1.0 General The primary delivery piping system shall be for suction or pressure applications and have semi-rigid coaxial type double wall construction,
Pro d u c t Inn o vat i o n
Static Mixing Technology Pro d u c t Inn o vat i o n Since 1965, in thousands of installations worldwide, Kenics Static Mixers have set the standard for in-line mixing and heat transfer performance. Chemineer
Installation of Large Diameter Buried Pipes
Installation of Large Diameter Buried Pipes Sullivan (Sully) Curran P. E., Executive Director I. Introduction and Scope There is an ongoing need to provide designers, specifiers, engineers, consultants
Stainless steel grade chart
Stainless steel grade chart ATLAS STEELS METAL DISTRIBUTION Chemical analysis (%) specified C Si Mn P S Cr Mo Ni Other Austenitic stainless steels 253MA S30815 0.05 1.1-2.0 0.8 0.040 0.030 20.0-22.0 10.0-12.0
SITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
Rely on Our Material Competence for Your Demanding Industrial Processes
Cast Materials Rely on Our Material Competence for Your Demanding Industrial Processes Our customer-focused R&D and continuous research on new material options enable us to develop equipment with a strong
Commercial Electric Water Heater
Commercial Electric Water Heater Provides Tepid Water For Emergency Fixtures Features Heavy Duty Construction Hydrastone cement lining provides tank longevity Copper-silicon alloy tappings cannot rust
PIPES, TANKS and ANCILLARIES not in contact with water intended for human consumption
Mandate M/131 Page 1 sur 24 MANDATE M/131 MANDATE TO CEN/CENELEC CONCERNING THE EXECUTION OF STANDARDISATION WORK FOR HARMONIZED STANDARDS ON CReatE PIPES, TANKS and ANCILLARIES not in contact with water
中 华 人 民 共 和 国 化 工 行 业 标 准
HG/T 21562 1994 HG PROFESSIONAL STANDARD OF THE PEOPLE S REPUBLIC OF CHINA 中 华 人 民 共 和 国 化 工 行 业 标 准 HG/T 21562-1994 Lining PTFE steel pipes and fittings 衬 聚 四 氟 乙 烯 钢 管 和 管 件 Issued on December 29, 1994
4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves
1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire
Soldering, Brazing, and Welding
This sample chapter is for review purposes only. Copyright The Goodheart-Willcox Co., Inc. All rights reserved. 46 Section Introduction to Plumbing Soldering, Brazing, and Welding Objectives This chapter
UNIVERSIDAD LIBRE FACULTAD DE INGENIEIRA DEPARTAMENTO DE CIENCIAS BASICAS
UNIVERSIDAD LIBRE FACULTAD DE INGENIEIRA DEPARTAMENTO DE CIENCIAS BASICAS UNIVERSIDAD LIBRE FACULTAD DE INGENIEIRA DEPARTAMENTO DE CIENCIAS BASICAS PLAN OPERATION Hughson, R. English for careers the
Specification for Pipe Coating Repairs Offshore
Specification for Pipe Coating Repairs Offshore Specification for Pipe Coating Repairs Offshore 1 of 6 Table of Contents 1.0 SCOPE... 3 2.0 REFERENCE DOCUMENTS... 3 3.0 MATERIALS... 3 4.0 EQUIPMENT AND
Introduction to Fiber Optic Cables. Photoelectric Sensors. 2Photoelectric Sensors, Standard Sensors, Fiber optic cables. Please Note!
Photoelectric, Standard, optic cables Photoelectric Introduction to Optic s Optic Diffuse and Thru-Beam Mode In applications involving small targets or unfavorable conditions, fiber optic cables may be
Axial and Mixed Flow Pumps for Large Volume Pumping
Vertical Industrial and Process Axial and Mixed Flow for Large Volume Pumping Encased (Can ) Water and Process Liquid Vertical Turbine for Water Supply from Drilled Wells Vertical close coupled single
TARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
Approved Products for Fire Protection Piping Systems
R FIRE PROTECTION PRODUCTS 10.01 Approved Products for Fire Protection Piping Systems This product submittal contains approvals of the following piping products for the below-listed projects: products
STANDARD SPECIFICATION. for. Plumbing, Heating, Hot Water, Cold Water & Electrical work. Sussex Lodge London W2 & 16 Stanhope Terrace London W2
STANDARD for Plumbing, Heating, Hot Water, Cold Water & Electrical work undertaken by owners within the building known as Sussex Lodge London W2 & 16 Stanhope Terrace London W2 BPME Consulting Engineers
Alternative Fuels. Overview
Alternative Fuels Overview 01 our COMPAny TRANSFORMATIONAL GROWTH in value-added steel processing, pressure cylinders and heavy equipment cab manufacturing. For fiscal 2014, the Company had $3.1 billion