INDEX 1. HARDWARE REQUIREMENTS 2. CONVENTIONS 3. INSTALLING GALACTIC STOCK TRADER 4. THE MAIN MENU. Galactic Stock Trader - Owner s Handbook

Transcription

1 INDEX 1. HARDWARE REQUIREMENTS 2. CONVENTIONS 3. INSTALLING GALACTIC STOCK TRADER 3.1. Installation Of The Hardware Security Lock 4. THE MAIN MENU 4.1. FILE New Open Edit Delete Print Options Printer Setup Exit 4.2. ITEM NAME (STOCK) New Edit Delete 4.3. CHART 4.4. SEARCH Database Item Aspects Item Table Solutions 4.5. HELP

2 1. HARDWARE REQUIREMENTS COMPUTER IBM or compatible PII266 running at 266 MHz, or better. MEMORY At least 32 Mb of memory. Recommended: 64 Mb or better. WINDOWS Windows XP or higher Note: You must have a "mouse" to run Galactic Stock Trader. VIDEO CARD SVGA (1024 x 768) MONITOR SVGA Monitor. PRINTER Any printer compatible with Windows.

3 2. CONVENTIONS MOUSE When using the mouse and its on-screen pointer to select items and initiate actions the following apply: "Click" - click the left mouse button once. "Double-click" -click the left mouse button twice, in quick succession. "Right-Click" - click the right mouse button once. TIME All times are shown and must be edited in 24 hours format. Example: 9:00PM must be typed as 21:00.

4 3. INSTALLING GALACTIC STOCK TRADER 3.1. Installation Of The Hardware Security Lock The purpose of the hardware lock is to ensure that only authorized users of Galactic Stock Trader can run the program. The software cannot run without an attached security lock. The hardware lock is an electronic device and should be handled with care. If you slide across a thick carpet, then before handling the lock, discharge static electricity by touching a grounded object such as the metal case of your PC. Avoid touching the ends of the lock. You can transport the lock between locations, such as home and office, without fear of damaging it. Just don't keep it in the same pocket as your keys or in the bottom of your gym bag. Step 1 Step 2 Exit your programs and switch off your computer. If you are using a USB type security key, attach the key directly to an empty USB port on your computer. If you are using a parallel port type security key, the security key fits between your computer and printer (if you have one), as show in the diagram below. If you have a printer attached to the standard parallel printer port, disconnect it. HARDWARE KEY If you have a printer, (re)connect the printer cable to the now exposed end of the hardware security key. Make sure all connections are snug. If you have screws on the end of your printer cable that are attached to the hardware key lock, tighten them and also tighten the hardware key lock's own screws in order to hold it firmly to the micro. If you have more than one security key, then "piggyback" them. With the security key now properly installed, proceed with the installation of the software.

5 4. THE MAIN MENU The MAIN MENU is the area below the Caption Bar where the name GALACTIC STOCK TRADER is. The MAIN MENU has the following items. FILE STOCK (ITEM) SEARCH HELP

6 4.1. FILE In this section you have the control of your files. Files are groups of items. Your items can be Stocks, Commodities, Friends, The World... Select the sub menu under file by clicking on FILE on the MAIN MENU or clicking the FILE button. By doing that you get the following options: New Open Edit Print Options Printer Setup Exit Create a new group of items, Open a group of items to use. Edit a group of items. Select between Color or B&W printing. Change the printer in use and parameters. Close Galactic Stock Trader New

7 In this section you will create a group file for anything that you want; Stocks, Commodities, Friends, Countries... Click on New and the Create New File window will appear. Here you have four fields. Description - is the description of your group of items. Ex. My Friends for your friends group, The World for your countries group, Stocks for your stock groups. Item Name - is the name for one specific item. Ex. Friend Name for your friends group, Country for your The World group, Stock for your stock group. The Galactic Stock Trader can do research on two different dates for each item and these are the First Date Name and Second Date Name fields. Ex. In your My Friends group you can have the dates as Birthday for First Date Name and Marriage date for the Second Date Name. In your The World group you can have Independence day for the First Date Name and Last Revolution for the Second Date Name. In your Stocks group you will have Incorporation date for your First Date Name and First Trade for your Second Date Name.

8 Open Click on Open and the Select to Open window will appear. Trader. In this window we can select between two groups of files that comes with the Galactic Stock Click on Stocks or Commodities and your Main Galactic Stock Trader window will change. The caption bar on the top of the window now shows Stocks as the Data Base in use. All operations now will be performed on the Stocks Data Base, to change to the Commodities Data Base click again on File, Open and select Commodities Edit

9 Click on File, Edit and the Select to edit window will appear. After you select the Data Base you can edit the parameters for Description, Item Name, First Date Name and Second Date Name Delete Click on Stock or Commodity and Select to Delete window will appear.

10 Print Options Here you can select between Color or Black and White printing Printer Setup Here you can select the printer that you are going to use and change this printer s parameters. Click on File, Printer Setup and the Printer Setup window will appear Exit Click on Exit or on the Exit button to close The Galactic Stock Trader.

11 4.2. ITEM NAME (STOCK) The item name that appears on the Main Menu is the same that you typed on Item Name field on the New File window. See If you have the Stocks data base open you will see on the Main Menu and on the Item button the name Stock, if you have the Commodities data base open you will see Commodity, and if you create a data base The World with the Item Name equal Country you will see the word Country on the Item on the Main Menu and on the Item button. Click on Stock (Item Name) and the sub menu will appear New Click on New and the window to create a new item will appear. Here you have to type the item name, in this case the stock name. The Incorporation fields and First Trade fields are the name that you typed for First Date Name and Second Date Name in the Create New File window. See In the First Date Name (Incorporation for Stocks) the fields that you need to type are the Incorporation Date, the Incorporation Time, the Longitude and Latitude where the Incorporation happened and the Location name. The same for the Second Date Name (First Trade for Stocks). Note that dates in this window must be typed with a full year format. Ex 10/10/1935, 01/07/ Click the OK button to create this new item (Stock) or click the Cancel button to cancel this operation.

12 Edit Click on edit and the Select to Edit window will appear. Click on the Item that you want to edit. If you click on Flowers.com the following window will appear. Here you can edit any of the item parameters and click OK to save the alterations.

13 Delete Click on delete and the Select to Delete window will appear. Click on the Item that you want to delete. The selected item will be deleted.

14 4.3. CHART On the Main Menu click on Stock and on the Chart Button. The Chart window will appear. Here you will have a list of all items for the opened data base. When you click on one item the information for this item will appear for the Incorporation (First Date Name see 4.1.1) section and for the First Trade (Second Date Name see 4.1.1) section. The next window shows the Flowers.com stock selected.

15 If you click the Show button in the Incorporation section you will get the Natal Chart for this stock on the incorporation date, as shown below. This chart is a simple Geocentric transits to Geocentric Incorporation. The transits are for the actual date and time. To change from Geocentric to Heliocentric click on the RED word GEOCENTRIC in the top right corner of the chart, the word will change to HELIOCENTRIC and the chart will be a HELIOCENTRIC chart. To change to a specific date click on the RED date and time on the right top corner of the chart. The select date window will appear.

16 Click on the date that you want and the chart will be automatically updated, change the time and the chart will change for that specific time. Click OK and the changes will be accepted, click Cancel and the changes will be discarded. If you click on the RED words HOUSES OFF they will change to HOUSES ON and the chart will be shown with a house system. The house system can be Placidus or Koch. The next chart shows the Flowers.com Geocentric Transits to Incorporation for 8/3/99 at 12:15 with house system PLACIDUS. In this menu you can Print the chart, select between Color or Black and White printing on the Printer Options menu, change your printer and printer parameters on the Printer Setup menu or click on Close to close this chart. The next picture show a Tri-chart with Geocentric Transits, Geocentric Secondary Progression and Incorporation Natal chart of Flowers.com.

17 To change the chart to a Tri-chart click on Options on the chart menu. Click on Tri-Chart and click on Show. To change the type of progression, click on Options on the chart menu. Click on Progression and than select the progression that you want. To change the House System, click on Options on the chart menu. Click on House System and select between Placidus and Koch. To change the Ascendant to the Natal Ascendant, click on Options on the chart menu. Click on Use Natal Ascendant. On any chart if you move your mouse over any planet you will see the planet name and position on the top left corner of the chart. The previous picture shows the Menu for Studies. Here you can click on Show Natal Chart to have your regular Natal Chart.

18 The other studies are : Show Natal Signs Values On this option you have the position of the planets on the Natal day in red. The good positions are shown with the plus sign, the negative positions are shown with the minus sign. On the last two columns of this table you have the total of planets in good position and the total of planes in negative positions. Far to the right you have the actual angles or position of each planet. Show Natal Elements This table shows the position of the planets in the Astrological Elements. The last row shows the total of planets on each element.

19 Show Natal Aspects Here you have the aspects between planets. Good aspects are shown in green in the bottom left side of the table, and negative aspects are shown in red in the top right side of the table. Here you have an orb equal 6 degrees. To change the orb value click on Change Orb.

20 4.4. SEARCH Click on Search on the Main Menu window or click on the Search button. The sub menu for Search will appear. Here you have the following options : Database Item Aspects Item Table Solutions - Search entire database for specific aspects with specific parameters. - Search for specific aspects on a specific item. - View of the planets positions on table format. - View of previous searches.

21 Database Click on Database and the following window will appear. Let s search for aspects between 7/1/2010 and 7/5/2010. Click on the Start Date box and the Select Date window will appear Click on the End Date box and the Select Date window will appear. Look for July 2010 and click on the day 1. To change month on the Select Date window click on the left or right arrow on the horizontal scroll bar. To change the year click inside the horizontal scroll bar. Let s search only for stocks in the Technology category. Click on each Technology category. The search will be on Geocentric aspects to the Incorporation. Let s search for transits of the SUN, JUPITER, SATURN to the Natal planets SUN, JUPITER and SATURN. Click on those on the Transiting and Incorporation sector. The aspect angle will be 90 degrees with multiples. That means we will look for aspects of 0 degrees (conjunctions), 90 degrees (squares) and 180 degrees (oppositions). The aspect angle can be set to any degree, and if you choose multiples, you will see all aspects at multiples of that degree up to 180 degrees. Click the Search button and the search begins. The stock database that comes with the program is very large, if you select a search for all categories, for a very long period with many planets on and multiple aspects, this search can take many hours to be done. This time is always a function of your computer speed. You can always abort a search. Just click the Cancel button. While the program is performing a search you can use other programs. But you can not close Windows. When the search is over, if there is any solution the following window type will appear.

22 In this window you have the information that this solution is a search on the Stocks database, on the sectors listed, for aspects listed, Geocentric, to Natal Incorporation, Search on Transits (SUN, JUPITER, SATURN) and Natal Incorporation (SUN, JUPITER, SATURN), Aspects of 90 degrees and multiples. Bellow that you have a list in alphabetical order of the stocks and dates and aspects found for each date. If you double click one Date Aspect line the Natal Chart for that stock on that date will open. On this solution window you have a File Menu. In this menu you have the option to Print this solution, change you printer using the Printer Setup option or the option Close to close this Solution window. When you click close the following window will appear. Here you can click Yes and keep the solution to be used later or you can click no and discard this solution Item Aspects

23 appear. Here you are going to perform search of aspects for only one item of your database. Click on Item Aspects Research and the list of Items (in this case, Stocks) of your database will Click on the Item (Stock). In this example we clicked on Flowers.com and the following window will appear. Here as in the database search you can select dates, planets and aspects to search. You can click on Select to select another item. Click Search to begin the search.

24 Click Cancel to Cancel the search. When the search is over the solution window will appear as follows. In this solution window you have the File (Stocks) of the search, the Item (1-800-Flowers.com) of the search and all information of the search. The solutions are after the Item Name. Like the database solution you have options to Print the solution, change the printer sets using the Printer Setup option and to Close the solution. If you double click one Date Aspect line the Natal Chart for that stock on that date will open Item Table appear. Click on the Item Table option. The window with the Items will appear; select the item that you want and the Item Table will In this case we select the Flowers.com again.

25 The table shows the position of the planets on Incorporation Date, First Trade Date and the transits beginning on a specific date through the next Days forward. You can change the Days forward, change the beginning date by clicking on the From Date button, look to Geocentric or Heliocentric positions. To print the table, click on the Print button Solutions Click on Solutions and the following screen will appear.

26 This window shows in the left side all files that you create using the Search Database and Search Item options. Click on the file name and the text of the solution file will appear on the right side. If you double click one Date Aspect line the Natal Chart for that stock on that date will open. In the File Menu you have the options to print the selected solution, change the printer settings using the Printer Setup option, delete the selected solution using the Delete option or click Close to close the Solutions window. 4.5 HELP Click on Help and you have the following options. Contents - To open the Galactic Stock Trader help. Using Help - To learn how to use the help functions. About - To see your serial number.