FLIR A655sc 15. Mid- or high-end industrial R&D. Imaging and optical data. Spatial resolution (IFOV) F-number Hz (100/200 Hz with windowing)

Transcription

1 LIR sc 1 P/N: opyright 201, LIR Systems, Inc. ll rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of LIR Systems and/or its subsidiaries. ll other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. ocument identity Publ. No.: Release: ommit: 2732 Language: enus : ormatted: orporate eadquarters LIR Systems, Inc SW Parkway ve. Wilsonville, OR US Telephone: Website ustomer support isclaimer Specifications subject to change without further notice. amera models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. eneral description The LIR sc is an excellent choice for those working in R& but don't need the highest frame rates but do require 0 80 pixel resolution. When using the camera in R&, it is highly recommended to use the LIR ResearchIR software from LIR Systems. The camera is equipped with a 1 lens. Key features: ffordable. 1bit 0 80 pixel images at 2 z. Startandstop recording in LIR ResearchIR using digital input. Windowing mode: 0 20 pixels at 100 z or pixels at 200 z. Typical applications: Mid or highend industrial R&. Imaging and optical data IR resolution Thermal sensitivity/nt ield of view (OV) Minimum focus distance ocal length 0 80 pixels < +30 (+8 ) / 30 mk 1 11 (19 diagonal) 0.0 m (1. ft.) 1.3 mm (1.3 in.) Spatial resolution (IOV) 0.1 mrad Lens identification utomatic number 1.0 Image frequency 0 z (100/200 z with windowing) ocus utomatic or manual (built in motor) etector data etector type Spectral range 7. 1 µm etector pitch 17 µm ocal plane array (P), uncooled microbolometer etector time constant Measurement Object temperature range ccuracy Typical 8 ms 0 to +10 ( 0 to +302 ) 100 to +0 (+212 to ) ±2 (±3. ) or ±2% of reading 1 (1)

2 LIR sc 1 P/N: , LIR Systems, Inc. # ; r. /2732; enus Measurement analysis tmospheric transmission correction utomatic, based on inputs for distance, atmospheric temperature and relative humidity Optics transmission correction utomatic, based on signals from internal sensors missivity correction Variable from 0.01 to 1.0 Reflected apparent temperature correction xternal optics/windows correction Measurement corrections US US US, standard US, connector type US, communication US, image streaming US, protocols thernet thernet thernet, type utomatic, based on input of reflected temperature utomatic, based on input of optics/window transmission and temperature lobal object parameters ontrol and image US 2 S US Mini TP/IP socketbased LIR proprietary 1bit z Signal linear Temperature linear Radiometric TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp ontrol and image igabit thernet thernet, standard I thernet, connector type thernet, communication thernet, image streaming thernet, protocols RJ TP/IP socketbased LIR proprietary and eniam protocol 1bit z 1bit z 1bit z Signal linear Temperature linear Radiometric ig Vision and eniam compatible TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp igital input/output igital input, purpose igital input igital output, purpose igital output igital I/O, isolation voltage Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read) 2 optoisolated, 0 1. V = low, 3 2 V = high Output to ext. device (programmatically set) 2 optoisolated, ON = supply (max. 100 m), O = open 00 VRMS 2 (1)

3 LIR sc 1 P/N: , LIR Systems, Inc. # ; r. /2732; enus igital input/output igital I/O, supply voltage igital I/O, connector type Power system xternal power operation xternal power, connector type Voltage nvironmental data Operating temperature range Storage temperature range 2 V, max. 200 m pole jackable screw terminal 12/2 V, 2 W absolute max. 2pole jackable screw terminal llowed range V 1 to +0 (+ to +122 ) 0 to +70 ( 0 to +18 ) umidity (operating and storage) I /2 h 9% relative humidity +2 to +0 (+77 to +10 ) M ncapsulation IP 30 (I 029) N 10002:2001 (Immunity) N 10003:2001 (mission) 7 R Part 1 lass (mission) Shock 2 g (I ) Vibration 2 g (I 0082) Physical data Weight amera size (L W ) amera size, excl. lens (L W ) Tripod mounting ase mounting ousing material omments to physical data 0.92 kg (2.03 lb.) mm ( in.) mm ( in.) UN ¼"20 (on three sides) 2 M thread mounting holes (on three sides) luminum Outline dimensional drawings and STP files can be found at Shipping information Packaging, type List of contents Packaging, weight Packaging, size ardboard box Infrared camera with lens thernet cable LIR ResearchIR Max (licence only) LIR Tools download card ard transport case Mains cable Power cable, pigtailed Power supply Printed documentation US cable User documentation ROM mm ( in.) N UP ountry of origin Sweden Supplies & accessories: T19791; IR lens, f=1.3 mm (1 ) with case 3 (1)

4 LIR sc 1 P/N: , LIR Systems, Inc. # ; r. /2732; enus T197922; IR lens, f=2. mm (2 ) with case T19791; IR lens, f=13.1 mm ( ) with case T1980; IR lens, f=. mm (80 ) with case T1981; IR lens, f=88.9 mm (7 ) with case and support for xx/xxsc T19789; igh temperature option +300 to 2000 (+72 to 332 ) ; Power cord U ; Power cord US ; Power cord UK T910922; Power supply, incl. multi plugs, for 3xx, 3xxsc, xx and xxsc T911182; Power supply for 3xx f, IP ; US cable Std <> Mini T9100; thernet cable T, 2m/. ft ; Power cable, pigtailed T197871; ard transport case for 3xx/xx series T197870; ardboard box for 3xx/xx series T12889; ilter holder for xx lenses T1988; LIR Tools T19883; LIR Tools+ (license only) SW10000; LIR IR amera Player T19897; LIR ResearchIR Max + SR T19901; LIR ResearchIR Max + SR T1990; LIR ResearchIR Max + SR Upgrade T1989; LIR ResearchIR Max T199013; LIR ResearchIR Max T19903; LIR ResearchIR Max Upgrade T198731; LIR ResearchIR Standard T199012; LIR ResearchIR Standard T19902; LIR ResearchIR Standard Upgrade T1987; ThermoVision System evelopers Kit Ver. 2. T198; ThermoVision LabVIW igital Toolkit Ver. 3.3 (1)

5 amera housing M 1x elicoil (x) UN 1/20 0,7x elicoil (3x) 1in 2,mm 1,32in 33,mm P active area at focus far (infinity) 3,9mm 1,in 7mm 0 +0,1 2,in 0,000 +0,00 2mm ±0,1 (3x) 0,9in ±0,00 12mm ±0,1 (3x) 0,7in ±0,00 1,in 3,mm 2,87in ±0,00 7,97in ±0,0 203mm ±1 2,32in ±0,0 9mm ±1 3,9mm ±0,1 1,in ±0,00 7,mm ±0,1 2,93in ±0, enomination heck rawn by R& Thermography asic dimensions LIR /S xx 3 rawing No. T1292 1(9) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

6 2,93in ±0,00 7,mm ±0, amera with Lens IR f=, mm (80 ),78in 121,mm,in 11,mm,03in 13,1mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,02in ±0,0 12,9mm ±1 11,7in ±0,0 29,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 2(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

7 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=13,1 mm ( ) 1,9in 9,3mm 1,in 2,3mm 3,19in 81mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,19in ±0,0 81mm ±1 8,8in ±0,0 22,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 3(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

8 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=2, mm (2 ) 1,in 0,8mm 1,33in 33,8mm 2,8in 72,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 2,8in ±0,0 72,mm ±1 8,in ±0,0 21mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

9 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=1,3 mm (1 ) 1,83in,mm 1,in 39,mm 3,08in 78,2mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,08in ±0,0 78,2mm ±1 8,73in ±0,0 221,8mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

10 3,78in 9mm 3,in 89mm,03in 127,7mm Lens support Optional 2,32in ±0,0 9mm ±1 in ±0,0 127,7mm ±1 10,8in ±0,0 271mm ±1 2,in ±0,01,9mm ±0,2 1,03in ±0,01 2,1mm ±0,3 1,77in ±0,01 mm ±0,2,9in ±0,00 12mm ±0,1,29in ±0,01 109mm ±0,2 3,in ±0,01 90mm ±0,2,03in 127,7mm amera with Lens IR f=88,9 mm (7 ) incl support UN 1/"20 0,7x elicoil (3x) ase support Optional 2,7in 70mm enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

11 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 1,X (2 µm) 3,38in 8,9mm 3,11in 78,9mm,3in 117,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,3in ±0,0 117,mm ±1 10,28in ±0,0 21,2mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 7(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

12 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 2,9X (0 µm) 1,2in 32mm 1,12in 28,mm loseup lens 3,98in 101mm IR Lens f=2, mm 2,72in 9,2mm 2,in 2,3mm loseup lens 3,98in 101mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,98in ±0,0 101mm ±1 9,3in ±0,0 2,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 8(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

13 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens,8x (100 µm) 1,08in 27,mm 0,9in 2mm loseup lens 3,8in 9,mm IR Lens f=2, mm 2,in,8mm 2,27in 7,8mm loseup lens 3,8in 9,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,8 ±0,0 9, ±1 9,in ±0,0 239,9mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 9(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

14

15

16 LIR sc 2 P/N: opyright 201, LIR Systems, Inc. ll rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of LIR Systems and/or its subsidiaries. ll other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. ocument identity Publ. No.: Release: ommit: 2732 Language: enus : ormatted: orporate eadquarters LIR Systems, Inc SW Parkway ve. Wilsonville, OR US Telephone: Website ustomer support isclaimer Specifications subject to change without further notice. amera models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. eneral description The LIR sc is an excellent choice for those working in R& and require the highest frame rates and 0 80 pixel resolution. When using the camera in R&, it is highly recommended to use the LIR ResearchIR software from LIR Systems. The camera is equipped with the standard 2 lens. Key features: ffordable. 1bit 0 80 pixel images at 0 z. Startandstop recording in LIR ResearchIR using digital input. Windowing mode: 0 20 pixels at 100 z or pixels at 200 z. Typical applications: Mid or highend industrial R&. Imaging and optical data IR resolution Thermal sensitivity/nt ield of view (OV) Minimum focus distance ocal length 0 80 pixels < +30 (+8 ) / 30 mk 2 19 (31 diagonal) 0.2 m (0.82 ft.) 2. mm (0.97 in.) Spatial resolution (IOV) 0.8 mrad Lens identification utomatic number 1.0 Image frequency 0 z (100/200 z with windowing) ocus utomatic or manual (built in motor) etector data etector type Spectral range 7. 1 µm etector pitch 17 µm ocal plane array (P), uncooled microbolometer etector time constant Measurement Object temperature range ccuracy Typical 8 ms 0 to +10 ( 0 to +302 ) 100 to +0 (+212 to ) ±2 (±3. ) or ±2% of reading 1 (1)

17 LIR sc 2 P/N: , LIR Systems, Inc. # ; r. /2732; enus Measurement analysis tmospheric transmission correction utomatic, based on inputs for distance, atmospheric temperature and relative humidity Optics transmission correction utomatic, based on signals from internal sensors missivity correction Variable from 0.01 to 1.0 Reflected apparent temperature correction xternal optics/windows correction Measurement corrections US US US, standard US, connector type US, communication US, image streaming US, protocols thernet thernet thernet, type utomatic, based on input of reflected temperature utomatic, based on input of optics/window transmission and temperature lobal object parameters ontrol and image US 2 S US Mini TP/IP socketbased LIR proprietary 1bit z Signal linear Temperature linear Radiometric TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp ontrol and image igabit thernet thernet, standard I thernet, connector type thernet, communication thernet, image streaming thernet, protocols RJ TP/IP socketbased LIR proprietary and eniam protocol 1bit z 1bit z 1bit z Signal linear Temperature linear Radiometric ig Vision and eniam compatible TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp igital input/output igital input, purpose igital input igital output, purpose igital output igital I/O, isolation voltage Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read) 2 optoisolated, 0 1. V = low, 3 2 V = high Output to ext. device (programmatically set) 2 optoisolated, ON = supply (max. 100 m), O = open 00 VRMS 2 (1)

18 LIR sc 2 P/N: , LIR Systems, Inc. # ; r. /2732; enus igital input/output igital I/O, supply voltage igital I/O, connector type Power system xternal power operation xternal power, connector type Voltage nvironmental data Operating temperature range Storage temperature range 2 V, max. 200 m pole jackable screw terminal 12/2 V, 2 W absolute max. 2pole jackable screw terminal llowed range V 1 to +0 (+ to +122 ) 0 to +70 ( 0 to +18 ) umidity (operating and storage) I /2 h 9% relative humidity +2 to +0 (+77 to +10 ) M ncapsulation IP 30 (I 029) N 10002:2001 (Immunity) N 10003:2001 (mission) 7 R Part 1 lass (mission) Shock 2 g (I ) Vibration 2 g (I 0082) Physical data Weight amera size (L W ) amera size, excl. lens (L W ) Tripod mounting ase mounting ousing material omments to physical data 0.90 kg (1.98 lb.) mm ( in.) mm ( in.) UN ¼"20 (on three sides) 2 M thread mounting holes (on three sides) luminum Outline dimensional drawings and STP files can be found at Shipping information Packaging, type List of contents Packaging, weight Packaging, size ardboard box Infrared camera with lens thernet cable LIR ResearchIR Max (licence only) LIR Tools download card ard transport case Mains cable Power cable, pigtailed Power supply Printed documentation US cable User documentation ROM. kg (11.9 lb.) mm ( in.) N UP ountry of origin Sweden Supplies & accessories: T19791; IR lens, f=1.3 mm (1 ) with case 3 (1)

19 LIR sc 2 P/N: , LIR Systems, Inc. # ; r. /2732; enus T197922; IR lens, f=2. mm (2 ) with case T19791; IR lens, f=13.1 mm ( ) with case T19809; loseup IR lens, 2.9 (0 µm) with case T19800; loseup IR lens,.8 (100 µm) with case T1980; IR lens, f=. mm (80 ) with case T1981; IR lens, f=88.9 mm (7 ) with case and support for xx/xxsc T1980; loseup IR lens, 1. (2 µm) with case T19789; igh temperature option +300 to 2000 (+72 to 332 ) ; Power cord U ; Power cord US ; Power cord UK T910922; Power supply, incl. multi plugs, for 3xx, 3xxsc, xx and xxsc T911182; Power supply for 3xx f, IP ; US cable Std <> Mini T9100; thernet cable T, 2m/. ft ; Power cable, pigtailed T197871; ard transport case for 3xx/xx series T197870; ardboard box for 3xx/xx series T12889; ilter holder for xx lenses T1988; LIR Tools T19883; LIR Tools+ (license only) SW10000; LIR IR amera Player T19897; LIR ResearchIR Max + SR T19901; LIR ResearchIR Max + SR T1990; LIR ResearchIR Max + SR Upgrade T1989; LIR ResearchIR Max T199013; LIR ResearchIR Max T19903; LIR ResearchIR Max Upgrade T198731; LIR ResearchIR Standard T199012; LIR ResearchIR Standard T19902; LIR ResearchIR Standard Upgrade T1987; ThermoVision System evelopers Kit Ver. 2. T198; ThermoVision LabVIW igital Toolkit Ver. 3.3 (1)

20 amera housing M 1x elicoil (x) UN 1/20 0,7x elicoil (3x) 1in 2,mm 1,32in 33,mm P active area at focus far (infinity) 3,9mm 1,in 7mm 0 +0,1 2,in 0,000 +0,00 2mm ±0,1 (3x) 0,9in ±0,00 12mm ±0,1 (3x) 0,7in ±0,00 1,in 3,mm 2,87in ±0,00 7,97in ±0,0 203mm ±1 2,32in ±0,0 9mm ±1 3,9mm ±0,1 1,in ±0,00 7,mm ±0,1 2,93in ±0, enomination heck rawn by R& Thermography asic dimensions LIR /S xx 3 rawing No. T1292 1(9) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

21 2,93in ±0,00 7,mm ±0, amera with Lens IR f=, mm (80 ),78in 121,mm,in 11,mm,03in 13,1mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,02in ±0,0 12,9mm ±1 11,7in ±0,0 29,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 2(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

22 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=13,1 mm ( ) 1,9in 9,3mm 1,in 2,3mm 3,19in 81mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,19in ±0,0 81mm ±1 8,8in ±0,0 22,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 3(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

23 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=2, mm (2 ) 1,in 0,8mm 1,33in 33,8mm 2,8in 72,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 2,8in ±0,0 72,mm ±1 8,in ±0,0 21mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

24 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=1,3 mm (1 ) 1,83in,mm 1,in 39,mm 3,08in 78,2mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,08in ±0,0 78,2mm ±1 8,73in ±0,0 221,8mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

25 3,78in 9mm 3,in 89mm,03in 127,7mm Lens support Optional 2,32in ±0,0 9mm ±1 in ±0,0 127,7mm ±1 10,8in ±0,0 271mm ±1 2,in ±0,01,9mm ±0,2 1,03in ±0,01 2,1mm ±0,3 1,77in ±0,01 mm ±0,2,9in ±0,00 12mm ±0,1,29in ±0,01 109mm ±0,2 3,in ±0,01 90mm ±0,2,03in 127,7mm amera with Lens IR f=88,9 mm (7 ) incl support UN 1/"20 0,7x elicoil (3x) ase support Optional 2,7in 70mm enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

26 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 1,X (2 µm) 3,38in 8,9mm 3,11in 78,9mm,3in 117,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,3in ±0,0 117,mm ±1 10,28in ±0,0 21,2mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 7(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

27 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 2,9X (0 µm) 1,2in 32mm 1,12in 28,mm loseup lens 3,98in 101mm IR Lens f=2, mm 2,72in 9,2mm 2,in 2,3mm loseup lens 3,98in 101mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,98in ±0,0 101mm ±1 9,3in ±0,0 2,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 8(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

28 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens,8x (100 µm) 1,08in 27,mm 0,9in 2mm loseup lens 3,8in 9,mm IR Lens f=2, mm 2,in,8mm 2,27in 7,8mm loseup lens 3,8in 9,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,8 ±0,0 9, ±1 9,in ±0,0 239,9mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 9(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

29

30

31 LIR sc P/N: opyright 201, LIR Systems, Inc. ll rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of LIR Systems and/or its subsidiaries. ll other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. ocument identity Publ. No.: Release: ommit: 2732 Language: enus : ormatted: orporate eadquarters LIR Systems, Inc SW Parkway ve. Wilsonville, OR US Telephone: Website ustomer support isclaimer Specifications subject to change without further notice. amera models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. eneral description The LIR sc is an excellent choice for those working in R& and require the highest frame rates and 0 80 pixel resolution. When using the camera in R&, it is highly recommended to use the LIR ResearchIR software from LIR Systems. The camera is equipped with a lens. Key features: ffordable. 1bit 0 80 pixel images at 0 z. Startandstop recording in LIR ResearchIR using digital input. Windowing mode: 0 20 pixels at 100 z or pixels at 200 z. Typical applications: Mid or highend industrial R&. Imaging and optical data IR resolution Thermal sensitivity/nt ield of view (OV) Minimum focus distance ocal length 0 80 pixels < +30 (+8 ) / 30 mk 3 ( diagonal) 0.1 m (0.9 ft.) 13.1 mm (0.2 in.) Spatial resolution (IOV) 1.23 mrad Lens identification utomatic number 1.0 Image frequency 0 z (100/200 z with windowing) ocus utomatic or manual (built in motor) etector data etector type Spectral range 7. 1 µm etector pitch 17 µm ocal plane array (P), uncooled microbolometer etector time constant Measurement Object temperature range ccuracy Typical 8 ms 0 to +10 ( 0 to +302 ) 100 to +0 (+212 to ) ±2 (±3. ) or ±2% of reading 1 (1)

32 LIR sc P/N: , LIR Systems, Inc. # ; r. /2732; enus Measurement analysis tmospheric transmission correction utomatic, based on inputs for distance, atmospheric temperature and relative humidity Optics transmission correction utomatic, based on signals from internal sensors missivity correction Variable from 0.01 to 1.0 Reflected apparent temperature correction xternal optics/windows correction Measurement corrections US US US, standard US, connector type US, communication US, image streaming US, protocols thernet thernet thernet, type utomatic, based on input of reflected temperature utomatic, based on input of optics/window transmission and temperature lobal object parameters ontrol and image US 2 S US Mini TP/IP socketbased LIR proprietary 1bit z Signal linear Temperature linear Radiometric TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp ontrol and image igabit thernet thernet, standard I thernet, connector type thernet, communication thernet, image streaming thernet, protocols RJ TP/IP socketbased LIR proprietary and eniam protocol 1bit z 1bit z 1bit z Signal linear Temperature linear Radiometric ig Vision and eniam compatible TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp igital input/output igital input, purpose igital input igital output, purpose igital output igital I/O, isolation voltage Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read) 2 optoisolated, 0 1. V = low, 3 2 V = high Output to ext. device (programmatically set) 2 optoisolated, ON = supply (max. 100 m), O = open 00 VRMS 2 (1)

33 LIR sc P/N: , LIR Systems, Inc. # ; r. /2732; enus igital input/output igital I/O, supply voltage igital I/O, connector type Power system xternal power operation xternal power, connector type Voltage nvironmental data Operating temperature range Storage temperature range 2 V, max. 200 m pole jackable screw terminal 12/2 V, 2 W absolute max. 2pole jackable screw terminal llowed range V 1 to +0 (+ to +122 ) 0 to +70 ( 0 to +18 ) umidity (operating and storage) I /2 h 9% relative humidity +2 to +0 (+77 to +10 ) M ncapsulation IP 30 (I 029) N 10002:2001 (Immunity) N 10003:2001 (mission) 7 R Part 1 lass (mission) Shock 2 g (I ) Vibration 2 g (I 0082) Physical data Weight amera size (L W ) amera size, excl. lens (L W ) Tripod mounting ase mounting ousing material omments to physical data 0.9 kg (2.07 lb.) mm ( in.) mm ( in.) UN ¼"20 (on three sides) 2 M thread mounting holes (on three sides) luminum Outline dimensional drawings and STP files can be found at Shipping information Packaging, type List of contents Packaging, weight Packaging, size ardboard box Infrared camera with lens thernet cable LIR ResearchIR Max (licence only) LIR Tools download card ard transport case Mains cable Power cable, pigtailed Power supply Printed documentation US cable User documentation ROM mm ( in.) N UP ountry of origin Sweden Supplies & accessories: T19791; IR lens, f=1.3 mm (1 ) with case 3 (1)

34 LIR sc P/N: , LIR Systems, Inc. # ; r. /2732; enus T197922; IR lens, f=2. mm (2 ) with case T19791; IR lens, f=13.1 mm ( ) with case T1980; IR lens, f=. mm (80 ) with case T1981; IR lens, f=88.9 mm (7 ) with case and support for xx/xxsc T1980; loseup IR lens, 1. (2 µm) with case T19789; igh temperature option +300 to 2000 (+72 to 332 ) ; Power cord U ; Power cord US ; Power cord UK T910922; Power supply, incl. multi plugs, for 3xx, 3xxsc, xx and xxsc T911182; Power supply for 3xx f, IP ; US cable Std <> Mini T9100; thernet cable T, 2m/. ft ; Power cable, pigtailed T197871; ard transport case for 3xx/xx series T197870; ardboard box for 3xx/xx series T12889; ilter holder for xx lenses T1988; LIR Tools T19883; LIR Tools+ (license only) SW10000; LIR IR amera Player T19897; LIR ResearchIR Max + SR T19901; LIR ResearchIR Max + SR T1990; LIR ResearchIR Max + SR Upgrade T1989; LIR ResearchIR Max T199013; LIR ResearchIR Max T19903; LIR ResearchIR Max Upgrade T198731; LIR ResearchIR Standard T199012; LIR ResearchIR Standard T19902; LIR ResearchIR Standard Upgrade T1987; ThermoVision System evelopers Kit Ver. 2. T198; ThermoVision LabVIW igital Toolkit Ver. 3.3 (1)

35 amera housing M 1x elicoil (x) UN 1/20 0,7x elicoil (3x) 1in 2,mm 1,32in 33,mm P active area at focus far (infinity) 3,9mm 1,in 7mm 0 +0,1 2,in 0,000 +0,00 2mm ±0,1 (3x) 0,9in ±0,00 12mm ±0,1 (3x) 0,7in ±0,00 1,in 3,mm 2,87in ±0,00 7,97in ±0,0 203mm ±1 2,32in ±0,0 9mm ±1 3,9mm ±0,1 1,in ±0,00 7,mm ±0,1 2,93in ±0, enomination heck rawn by R& Thermography asic dimensions LIR /S xx 3 rawing No. T1292 1(9) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

36 2,93in ±0,00 7,mm ±0, amera with Lens IR f=, mm (80 ),78in 121,mm,in 11,mm,03in 13,1mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,02in ±0,0 12,9mm ±1 11,7in ±0,0 29,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 2(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

37 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=13,1 mm ( ) 1,9in 9,3mm 1,in 2,3mm 3,19in 81mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,19in ±0,0 81mm ±1 8,8in ±0,0 22,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 3(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

38 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=2, mm (2 ) 1,in 0,8mm 1,33in 33,8mm 2,8in 72,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 2,8in ±0,0 72,mm ±1 8,in ±0,0 21mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

39 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=1,3 mm (1 ) 1,83in,mm 1,in 39,mm 3,08in 78,2mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,08in ±0,0 78,2mm ±1 8,73in ±0,0 221,8mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

40 3,78in 9mm 3,in 89mm,03in 127,7mm Lens support Optional 2,32in ±0,0 9mm ±1 in ±0,0 127,7mm ±1 10,8in ±0,0 271mm ±1 2,in ±0,01,9mm ±0,2 1,03in ±0,01 2,1mm ±0,3 1,77in ±0,01 mm ±0,2,9in ±0,00 12mm ±0,1,29in ±0,01 109mm ±0,2 3,in ±0,01 90mm ±0,2,03in 127,7mm amera with Lens IR f=88,9 mm (7 ) incl support UN 1/"20 0,7x elicoil (3x) ase support Optional 2,7in 70mm enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

41 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 1,X (2 µm) 3,38in 8,9mm 3,11in 78,9mm,3in 117,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,3in ±0,0 117,mm ±1 10,28in ±0,0 21,2mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 7(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

42 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 2,9X (0 µm) 1,2in 32mm 1,12in 28,mm loseup lens 3,98in 101mm IR Lens f=2, mm 2,72in 9,2mm 2,in 2,3mm loseup lens 3,98in 101mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,98in ±0,0 101mm ±1 9,3in ±0,0 2,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 8(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

43 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens,8x (100 µm) 1,08in 27,mm 0,9in 2mm loseup lens 3,8in 9,mm IR Lens f=2, mm 2,in,8mm 2,27in 7,8mm loseup lens 3,8in 9,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,8 ±0,0 9, ±1 9,in ±0,0 239,9mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 9(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

44

45

46 LIR sc 80 P/N: opyright 201, LIR Systems, Inc. ll rights reserved worldwide. Names and marks appearing herein are either registered trademarks or trademarks of LIR Systems and/or its subsidiaries. ll other trademarks, trade names or company names referenced herein are used for identification only and are the property of their respective owners. ocument identity Publ. No.: Release: ommit: 2732 Language: enus : ormatted: orporate eadquarters LIR Systems, Inc SW Parkway ve. Wilsonville, OR US Telephone: Website ustomer support isclaimer Specifications subject to change without further notice. amera models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. eneral description The LIR sc is an excellent choice for those working in R& and require the highest frame rates and 0 80 pixel resolution. When using the camera in R&, it is highly recommended to use the LIR ResearchIR software from LIR Systems. The camera is equipped with a 80 lens. Key features: ffordable. 1bit 0 80 pixel images at 0 z. Startandstop recording in LIR ResearchIR using digital input. Windowing mode: 0 20 pixels at 100 z or pixels at 200 z. Typical applications: Mid or highend industrial R&. Imaging and optical data IR resolution Thermal sensitivity/nt ield of view (OV) Minimum focus distance ocal length 0 80 pixels < +30 (+8 ) / 30 mk 80. (92.8 diagonal) mm (2. in.). mm (0.2 in.) Spatial resolution (IOV) 2.2 mrad Lens identification utomatic number 1.0 Image frequency 0 z (100/200 z with windowing) ocus utomatic or manual (built in motor) etector data etector type Spectral range 7. 1 µm etector pitch 17 µm ocal plane array (P), uncooled microbolometer etector time constant Measurement Object temperature range ccuracy Typical 8 ms 0 to +10 ( 0 to +302 ) 100 to +0 (+212 to ) ±2 (±3. ) or ±2% of reading 1 (1)

47 LIR sc 80 P/N: , LIR Systems, Inc. #001030; r. /2732; enus Measurement analysis tmospheric transmission correction utomatic, based on inputs for distance, atmospheric temperature and relative humidity Optics transmission correction utomatic, based on signals from internal sensors missivity correction Variable from 0.01 to 1.0 Reflected apparent temperature correction xternal optics/windows correction Measurement corrections US US US, standard US, connector type US, communication US, image streaming US, protocols thernet thernet thernet, type utomatic, based on input of reflected temperature utomatic, based on input of optics/window transmission and temperature lobal object parameters ontrol and image US 2 S US Mini TP/IP socketbased LIR proprietary 1bit z Signal linear Temperature linear Radiometric TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp ontrol and image igabit thernet thernet, standard I thernet, connector type thernet, communication thernet, image streaming thernet, protocols RJ TP/IP socketbased LIR proprietary and eniam protocol 1bit z 1bit z 1bit z Signal linear Temperature linear Radiometric ig Vision and eniam compatible TP, UP, SNTP, RTSP, RTP, TTP, IMP, IMP, ftp, SMTP, SM (IS), P, MNS (onjour), upnp igital input/output igital input, purpose igital input igital output, purpose igital output igital I/O, isolation voltage Image tag (start, stop, general), Image flow control, (stream on/off), Input ext. device (programmatically read) 2 optoisolated, 0 1. V = low, 3 2 V = high Output to ext. device (programmatically set) 2 optoisolated, ON = supply (max. 100 m), O = open 00 VRMS 2 (1)

48 LIR sc 80 P/N: , LIR Systems, Inc. #001030; r. /2732; enus igital input/output igital I/O, supply voltage igital I/O, connector type Power system xternal power operation xternal power, connector type Voltage nvironmental data Operating temperature range Storage temperature range 2 V, max. 200 m pole jackable screw terminal 12/2 V, 2 W absolute max. 2pole jackable screw terminal llowed range V 1 to +0 (+ to +122 ) 0 to +70 ( 0 to +18 ) umidity (operating and storage) I /2 h 9% relative humidity +2 to +0 (+77 to +10 ) M ncapsulation IP 30 (I 029) N 10002:2001 (Immunity) N 10003:2001 (mission) 7 R Part 1 lass (mission) Shock 2 g (I ) Vibration 2 g (I 0082) Physical data Weight amera size (L W ) amera size, excl. lens (L W ) Tripod mounting ase mounting ousing material omments to physical data 1.17 kg (2.8 lb.) mm ( in.) mm ( in.) UN ¼"20 (on three sides) 2 M thread mounting holes (on three sides) luminum Outline dimensional drawings and STP files can be found at Shipping information Packaging, type List of contents Packaging, weight ardboard box Infrared camera with lens thernet cable LIR ResearchIR Max (licence only) LIR Tools download card ard transport case Mains cable Power cable, pigtailed Power supply Printed documentation US cable User documentation ROM Packaging, size N UP ountry of origin Sweden Supplies & accessories: T19791; IR lens, f=1.3 mm (1 ) with case 3 (1)

49 LIR sc 80 P/N: , LIR Systems, Inc. #001030; r. /2732; enus T197922; IR lens, f=2. mm (2 ) with case T19791; IR lens, f=13.1 mm ( ) with case T1980; IR lens, f=. mm (80 ) with case T1981; IR lens, f=88.9 mm (7 ) with case and support for xx/xxsc T19789; igh temperature option +300 to 2000 (+72 to 332 ) ; Power cord U ; Power cord US ; Power cord UK T910922; Power supply, incl. multi plugs, for 3xx, 3xxsc, xx and xxsc T911182; Power supply for 3xx f, IP ; US cable Std <> Mini T9100; thernet cable T, 2m/. ft ; Power cable, pigtailed T197871; ard transport case for 3xx/xx series T197870; ardboard box for 3xx/xx series T12889; ilter holder for xx lenses T1988; LIR Tools T19883; LIR Tools+ (license only) SW10000; LIR IR amera Player T19897; LIR ResearchIR Max + SR T19901; LIR ResearchIR Max + SR T1990; LIR ResearchIR Max + SR Upgrade T1989; LIR ResearchIR Max T199013; LIR ResearchIR Max T19903; LIR ResearchIR Max Upgrade T198731; LIR ResearchIR Standard T199012; LIR ResearchIR Standard T19902; LIR ResearchIR Standard Upgrade T1987; ThermoVision System evelopers Kit Ver. 2. T198; ThermoVision LabVIW igital Toolkit Ver. 3.3 (1)

50 amera housing M 1x elicoil (x) UN 1/20 0,7x elicoil (3x) 1in 2,mm 1,32in 33,mm P active area at focus far (infinity) 3,9mm 1,in 7mm 0 +0,1 2,in 0,000 +0,00 2mm ±0,1 (3x) 0,9in ±0,00 12mm ±0,1 (3x) 0,7in ±0,00 1,in 3,mm 2,87in ±0,00 7,97in ±0,0 203mm ±1 2,32in ±0,0 9mm ±1 3,9mm ±0,1 1,in ±0,00 7,mm ±0,1 2,93in ±0, enomination heck rawn by R& Thermography asic dimensions LIR /S xx 3 rawing No. T1292 1(9) 2012, LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

51 2,93in ±0,00 7,mm ±0, amera with Lens IR f=, mm (80 ),78in 121,mm,in 11,mm,03in 13,1mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,02in ±0,0 12,9mm ±1 11,7in ±0,0 29,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 2(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

52 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=13,1 mm ( ) 1,9in 9,3mm 1,in 2,3mm 3,19in 81mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,19in ±0,0 81mm ±1 8,8in ±0,0 22,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 3(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

53 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=2, mm (2 ) 1,in 0,8mm 1,33in 33,8mm 2,8in 72,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 2,8in ±0,0 72,mm ±1 8,in ±0,0 21mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

54 7,mm ±0,1 2,93in ±0,00 7mm ±0,1 2,in ±0, amera with Lens IR f=1,3 mm (1 ) 1,83in,mm 1,in 39,mm 3,08in 78,2mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,08in ±0,0 78,2mm ±1 8,73in ±0,0 221,8mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

55 3,78in 9mm 3,in 89mm,03in 127,7mm Lens support Optional 2,32in ±0,0 9mm ±1 in ±0,0 127,7mm ±1 10,8in ±0,0 271mm ±1 2,in ±0,01,9mm ±0,2 1,03in ±0,01 2,1mm ±0,3 1,77in ±0,01 mm ±0,2,9in ±0,00 12mm ±0,1,29in ±0,01 109mm ±0,2 3,in ±0,01 90mm ±0,2,03in 127,7mm amera with Lens IR f=88,9 mm (7 ) incl support UN 1/"20 0,7x elicoil (3x) ase support Optional 2,7in 70mm enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 (9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

56 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 1,X (2 µm) 3,38in 8,9mm 3,11in 78,9mm,3in 117,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1,3in ±0,0 117,mm ±1 10,28in ±0,0 21,2mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 7(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

57 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens 2,9X (0 µm) 1,2in 32mm 1,12in 28,mm loseup lens 3,98in 101mm IR Lens f=2, mm 2,72in 9,2mm 2,in 2,3mm loseup lens 3,98in 101mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,98in ±0,0 101mm ±1 9,3in ±0,0 2,mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 8(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.

58 2,93in ±0,00 7,mm ±0,1 2,in ±0,00 7mm ±0, amera with loseup lens,8x (100 µm) 1,08in 27,mm 0,9in 2mm loseup lens 3,8in 9,mm IR Lens f=2, mm 2,in,8mm 2,27in 7,8mm loseup lens 3,8in 9,mm 2,87in ±0,00 2,32in ±0,0 9mm ±1 3,8 ±0,0 9, ±1 9,in ±0,0 239,9mm ±1 enomination heck rawn by R& Thermography asic dimensions LIR /S xx or additional dimensions see page 1 3 9(9) rawing No. T , LIR Systems, Inc. ll rights reserved worldwide. No part of this drawing may be reproduced, stored in a retrieval system, or transmitted in any form, or by any means, electronic, mechanical, photocopying, recording, or otherwise, without written permission from LIR Systems, Inc. Specifications subject to change without further notice. imensional data is based on nominal values. Products may be subject to regional market considerations. License procedures may apply. Product may be subject to US xport Regulations. Please refer to exportquestions@flir.com with any questions. iversion contrary to US law is prohibited.