4) How many peripheral devices can be connected to a single SCSI port? 4) A) 8 B) 32 C) 1 D) 100

Transcription

1 FALL COMP100 MIDTERM-2 EXAM /FACULTY OF ECON. AND ADMINISTRATIVE SCIENCES OF EUL Student Registration No: Instructor: Prof.Dr.Hüseyin Oğuz Student Name-Surname: Dept. of Computer Information Systems Date: /14:00-16:00(Surname:J-Z)/AS209 1) Which input/output bus is used by new PCs and Macs? 1) A) AGP B) Rambus C) PCI D) PDQ 2) What is the name of the temporary microprocessor storage locations used by the control unit? A) Apartments B) Registers C) Accumulators D) Receptacles 3) An electronically identified interface for getting information into and out of a computer is called a(n): A) interface. B) port. C) expansion card. D) bay. 2) 3) 4) How many peripheral devices can be connected to a single SCSI port? 4) A) 8 B) 32 C) 1 D) 100 5) Universal Serial Bus ports: 5) A) will probably be replaced by serial port technology. B) can accommodate any number of devices. C) allow you to connect and disconnect devices without shutting down your computer. D) do not allow hot swapping. 6) FireWire 6) A) is used primarily for peripherals that do not need any high-speed data transmission. B) is similar to USB except that it does not support plug and play. C) offers high-speed connections for up to 63 devices. D) was originally created for non-apple systems. 7) Since a computer uses direct current (DC) and wall outlets use alternating current (AC), a(n) is needed to convert the current. 8) The character code is the most widely used code on IBM mainframe computers. 9) The amount of room that a system unit needs to fit on the desk is called the. 7) 8) 9) 10) A superscalar CPU: 10) A) can execute more than one instruction per clock cycle. B) can execute thousands of instructions per clock tick. C) does not depend on pipelining to increase microprocessor

2 performance. D) is still in the testing stage and not available to the general public. 11) The step in the machine cycle interprets what action the program is telling the computer to perform. 12) The of a data bus determines how many bits can be transferred simultaneously. 13) A(n) is used to connect a sound card or a modem card into a computer system. 14) The is the large printed circuit board that holds the computer's important components such as the microprocessor. 15) Notebook computers use in order to use modems, networking, and other functions. 11) 12) 13) 14) 15) 16) When text moves down to the next line in a document automatically, it is called: A) word wrap. B) word placement. C) moving text. D) formatting text. 16) 17) A purple dotted underline beneath text indicates a: 17) A) Smart Tag. B) spelling error. C) formatting error. D) grammar error. 18) A wavy underline beneath a word indicates that the word is not in Microsoft's main dictionary. A) orange B) red C) green D) purple 18) 19) Before printing a document, you should it to make sure it looks exactly how you want it to look. 19) 20) What characters are allowed in filenames? 20) A) Text B) Numbers C) Spaces D) All of these choices 21) By default, Word saves documents in the on the hard drive. 21) A) My Computer folder B) My Documents folder C) user's folder D) My Network Place 22) Which window allows the user to search for and select clip art? 22) A) Clip Art task pane B) Clip Art Search box C) Insert Graphics D) Insert Graphics dialog box 23) When combining text with an image, you can have text appear: 23) A) wrap tightly around the outer edges.

3 B) wrap above or below the image. C) on top of or behind an image. D) all of the above. 24) If you wish to apply a border line style to a text box or image, display the Picture toolbar and click: A) Borders and Lines. B) Line style. C) Options. D) Border style. 24) 25) To correct a spelling error, on the word. 25) 26) If you wish to insert an image from a scanner or camera, which option should you choose from the dialog box? A) Choose the resolution B) Choose the options for inserting C) Choose the device D) All of the above 26) 27) The WordArt toolbar allows the user to: 27) A) choose a different shape. B) select a different style from the gallery. C) rotate an object. D) all of these 28) If you wish to convert a document to a Web page, you should display it in: A) the Web Layout View. B) colored format. C) a browser. D) a 600 X 480 resolution. 28) 29) shape(s) text into designs. 29) A) Clip art B) WordArt C) Text boxes D) Borders and Shading 30) If you wish to draw attention to text in a document, insert a so you can set the size, wrapping, style, and horizontal alignment. A) graphic B) text box C) Word Art object D) clip art object 31) The option wraps text around the edge of the image itself, contouring around the image, instead of the square boundary of the image. A) word wrap B) tight wrap C) text alignment D) text box 30) 31) 32) Where will an image be inserted in a document? 32) A) After the last word of text B) Where there is room available C) In a defined table D) At the insertion point

4 33) refers to the way text wraps around an image. 33) A) Text box B) Word wrap C) Text wrapping D) Wrapping style 34) If you wish to make changes to a Web page saved in Word, open up to make the revisions. 34) 35) The address of the active cell is displayed in the box. 35) A) address B) name C) formula D) dialog 36) A(n) box enables a user to input data or specify settings. 36) A) tab B) active C) dialog D) option 37) If the Picture toolbar does not appear, you can display it by choosing View, Toolbars,. A) Borders and Shading B) Pictures C) Clip art D) Graphics 37) 38) If you wish to adjust the size of a picture, use the to assist you. 38) A) Picture size box B) Picture dialog box C) sizing handles D) arrows 39) Which of the following is a VALID cell address in Excel? 39) A) 89X B) 5XI C) AZ41 D) Z5A 40) To insert a clip from the Microsoft Clip Organizer into a document, click the arrow on the right side of an image and choose from the shortcut menu. A) Cut B) Insert C) Move D) Copy 40) 41) After assigning a name to a workbook, the new name will appear in the: 41) A) title bar. B) status bar. C) name box. D) address bar. 42) A specific cell can be identified or referenced by its: 42) A) color. B) assigned number. C) cell address. D) border. 43) You must use the command sequence to save a previously named workbook with a different name. A) Save, Modify B) Save, File C) File, Save D) File, Save As 44) If you click on cell B8 and it contains a formula, the will be displayed in the active cell. A) value calculated by the formula B) contents of the cells referenced by the formula C) formula itself D) referenced cell addresses 43) 44)

5 45) If the text entered into cell F4 exceeds the width of the cell, the excess text will be displayed in cell as long as that cell is blank. A) G5 B) F3 C) E4 D) G4 45) 46) Which of the following is an example of a label? 46) A) 50 B) =A1*A3 C) =A5 D) Gross Pay 47) Press the key to erase a character to the right of the insertion point. A) Insert B) Delete C) Backspace D) Left arrow 47) 48) To view another worksheet within the same workbook: 48) A) double-click the tab at the bottom of the workbook containing the name of the desired worksheet. B) select File from the menu bar and then select the appropriate worksheet name from the listing at the bottom of the File menu. C) click the tab at the bottom of the workbook containing the name of the desired worksheet. D) select the File, Open command sequence from the menu bar. 49) When data is sorted in order, the data is arranged in order from lowest to highest. 49) 50) A flashing indicates that you are in edit mode. 50) 51) Sorting data refers to: 51) A) limiting the data displayed to only the data meeting a specific condition. B) switching the order of the columns displayed in the worksheet. C) displaying only specific columns. D) displaying the data in ascending or descending order. 52) The most commonly used slide layout is: 52) A) Text and Content. B) Title and Text. C) Blank. D) Title. 53) Which type of chart shows a comparison of individual items? 53) A) Pie B) Column C) Line D) Bar 54) What is the name of the program used to create data charts? 54) A) PowerPoint Graph B) Peripheral Program C) Microsoft Graph D) Microsoft Datasheet 55) What is the name of an item that is created by one program, but inserted into a document created by another program? A) Datasheet B) Object C) Embedded object D) Peripheral program 55)

6 56) Which toolbar would you use to add a chart to a PowerPoint slide? 56) A) Formatting B) Microsoft Graph C) Standard D) Chart 57) What is the default chart type PowerPoint automatically creates? 57) A) Bar B) Column C) Organization D) Line 58) To embed an existing Excel chart on a slide, which menu would you choose? A) Insert B) Tools C) File D) Edit 59) Which toolbar would you use to make formatting changes to a chart in a slide presentation? A) Microsoft Graph Formatting toolbar B) PowerPoint Standard toolbar C) Microsoft Graph Standard toolbar D) PowerPoint Formatting toolbar 58) 59) 60) Use the following terms to identify the elements in the figure: 60) A. scroll bar B. Standard toolbar C. status bar D. sheet tabs E. Formatting toolbar

7 COMP100 MID-TERM 2 ANSWERS (Gr.2: J-Z) 1) C 2) B 3) B 4) A 5) C 6) C 7) power supply 8) EBCDIC 9) footprint 10) A 11) decode 12) width 13) expansion slot 14) motherboard 15) PC cards 16) A 17) A 18) B 19) preview 20) D 21) B 22) A 23) D 24) B 25) right-click 26) B 27) D 28) A 29) B 30) B 31) B 32) D 33) D 34) Word 35) B 36) C 37) B 38) C 39) C 40) D 41) A 42) C 43) D 44) A 45) D 46) D 47) B 48) C 49) ascending 50) insertion point 51) D

8 52) B 53) D 54) C 55) C 56) C 57) B 58) A 59) C 60) B, E, A, C, D