System e-light 2M. 6x10/100TX und 2x100FX Managed Industrial Ethernet Switch. Version: EN_Manual_e-light-2M_v2.8.doc Description and Manual

Size: px
Start display at page:

Download "System e-light 2M. 6x10/100TX und 2x100FX Managed Industrial Ethernet Switch. Version: EN_Manual_e-light-2M_v2.8.doc Description and Manual"

Transcription

1 EV EV EV EV EV EV EV EV EV EV EV EV EV10-00 System e-light 2M 6x10/100TX und 2x100FX Managed Industrial Ethernet Switch Version: EN_Manual_e-light-2M_v2.8.doc Description and Manual eks Engel GmbH & Co. KG Schützenstraße 2-4 DE Wenden-Hillmicke Tel: +49 (0) Fax: +49 (0) Internet:

2 Content Introduction... 1 Characteristics... 1 Packing content... 2 View of front panel... 3 Reset-button... 4 DIP-switch... 4 LED Indications... 6 Ports... 8 Cabling Connecting the differential relay Mounting on DIN rail Ports and dimensions Hardware Installation Procedure: Ring Function Coupling Ring Application Dual Homing Application Web-Based Management... 20

3 Preparations System Login Port Status Single Port Information Port Statistics Port Control Switch Settings Port Mirroring VLAN Configuration Port-Based VLAN Q VLAN Alerts Configuration of alerts Event configuration Power alarm configuration IP Configuration SNTP Configuration IP Security RSTP Configuration System confirguration... 43

4 Per Port Configuration P-Ring QoS Configuration IGMP Security Manager SNMP Configuration Community Strings Trap Manager Configuration Backup TFTP Restore Configuration TFTP Backup Configuration TFTP Update Firmware Factory settings System Reboot Save the configuration Bandwidth control System Log System Log Configuration Event configuration Trouble shooting... 63

5 Technical details... 64

6 Introduction e-light 2M is a managed 6x10/100TX plus 2x100FX Industrial ring switch especially designed for industrial applications. A Web GUI allows the very easy management of e-light 2M. Characteristics According to IEEE Base-T, 802.3u 100Base-TX/100Base-FX 6x10/100TX (RJ45) and 2x100FX (POF, HCS, MM or SM) RJ-45 port supports Auto MDI/MDI-X function Store-and-forward switching architecture redundant power supply 12-70VDC Reverse polarity protection 2K MAC adress tables Web Management GUI Each port supports 4 priority queues IGMP Ingress packet filter and egress rate limit SNTP/SMTP Port Mirror for TX or TX and RX packets Alarm relay output for system events Ring function Port based VLAN / Q Tag VLAN IEEE 802.1p Class of service with port base, tag base and priority method DHCP client SNMP, web management, RMON TFTP firmware update and restore as well as backup of system configuration SUBJECT TO TECHNICAL ALTERATIONS SEITE : 1

7 Packing content Please compare the packings content with the list below: e-light 2M Ring Managed Industrial Switch Manual SUBJECT TO TECHNICAL ALTERATIONS SEITE : 2

8 Hardware description This section contains information about the hardware,the ports, the cabling and the installation of e-light 2M. View of front panel Front panel of e-light 2M SUBJECT TO TECHNICAL ALTERATIONS SEITE : 3

9 Reset-button With the reset button the switch can fast and easily be reset and restarted and the configuration can be reset to the default value. Restart: Keep the button pressed for 2 seconds. Reset to default value: Keep the button pressed for 5 seconds. The switch resets all configuration to the default value. DIP-switch The switch has got a 9-Dip switchfor the configuration of the operation mode, the alarm relay and the function of the ring master. The default value of the switch is OFF. DIP Switch No Status Description 1 OFF ON Alarm of port 1 switched off. Alarm of port 1 active. If the port s link fails, the fault LED lights up. 2 OFF ON Alarm of port 2 switched off. Alarm of port 2 active. If the port s link fails, the fault LED lights up. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 4

10 3 OFF ON Alarm of port 3 switched off. Alarm of port 3 active. If the port s link fails, the fault LED lights up. 4 OFF ON Alarm of port 4 switched off. Alarm of port 4 active. If the port s link fails, the fault LED lights up. 5 OFF ON Alarm of port 5 switched off. Alarm of port 5 active. If the port s link fails, the fault LED lights up. 6 OFF ON Alarm of port 6 switched off. Alarm of port 6 active. If the port s link fails, the fault LED lights up. 7 OFF ON Alarm of port 7 switched off. Alarm of port 7 active. If the port s link fails, the fault LED lights up. 8 OFF ON Alarm of port 8 switched off. Alarm of port 8 active. If the port s link fails, the fault LED lights up. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 5

11 9 OFF ON Function ring master switched off. Function switch as ring master in ring group active. [Note] 1. If the function port alarm is active, the LED flashes and the alarm relay signals port errors. 2. Please restart the switch after having set the DIP-switch. LED Indications The front panel of the switch contains 5 diagnostic LEDs which offer real time information on the system. Every port has got 2 status LEDs. The table below shows each LED status and its meaning. LED Status Meaning VDC Green Off The switch electronic is supplied with power The switch electronic is not supplied with power VDC 1 Green Power input at VDC 1 Off No power input at VDC 1 SUBJECT TO TECHNICAL ALTERATIONS SEITE : 6

12 VDC 2 Green Power input at VDC 2 Off No power input at VDC 2 Fail Ring FDX (Fiber optic port) FDX (electric port) LINK (Fiber optic port) Yellow Off Green Off Green Green Off Yellow Flashing Off Voltage breakdown, RJ45-port error or fiber optic port error No voltage breakdown, RJ45-port error or fiber optic port error The switch is the master of the ring group. The switch is not the master of the ring group (always on) Full duplex mode No connection or half duplex mode Connection Sending data packets No connection SUBJECT TO TECHNICAL ALTERATIONS SEITE : 7

13 Ports RJ-45 Ports All in all, there are 6 ports with 10/100Mbps. The ports detect the data rate for 10Base-T or 100Base-TX connections automatically. Auto MDI/MDIX means that the switch can establish a connection to another switch without havening to change the direct or cross-over cabling. The table below shows the pin assignment for direct or cross-over cabling. RJ-45 Pin Assignment Pin Number Assignment 1 Tx+ 2 Tx- 3 Rx+ 6 Rx- [Note] + and - signs represent the polarity of each wire pair. All TX-ports of the e-light 2M support the automatic MDI/MDIX operation.direct cabling can be used for all network connections to PCs, servers, other switches or hubs. In direct cablings the pins 1, 2, 3 and 6 at one end of the cable are directly connected to the pins 1, 2, 3 and 6 at the other end of the cable. The table below shows the 10Base-T/100Base-TX MDI and MDIX port outputs. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 8

14 Pin MDI-X Signal Name MDI Signal Name 1 Receive Data plus (RD+) Transmit Data plus (TD+) 2 Receive Data minus (RD-) Transmit Data minus (TD-) 3 Transmit Data plus (TD+) Receive Data plus (RD+) 6 Transmit Data minus (TD-) Receive Data minus (RD-) Direct cabling Cross-over cabling Fiber optic port There are two 100Base-FX ports which are suitable for multimode (2km) and/or singlemode (30km) and can have ST, SC, SC-BIDI, SMA, FC-PC, LC and E2000 as connectors with different wavelengths. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 9

15 Please refer to the scheme below when cabling two fiber optic ports. False cabling may lead to the port not working properly. Attention Do not look into the laser or the LED! Cabling Please use twisted-pair cables of the category 5 or higher to connect the RJ45 port. The electric cable between the switch and the link partner (switch, hub, workstation etc.) must not be longer than 100 metres. 50/125µm or 62,5/125µm multimode cables must be used for a multimode fiber optic segment. Thus, two switches can be connected across a distance of 2km. 9/125µm singlemode cables must be used for a singlemode fiber optic segment. Thus, two switches can be connected across a distances of up to 30km. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 10

16 Wiring the power supply Please connect the power supply to the clamps VDC1 and GND. The redundant power supply shall be connected to VDC2 and GND. The terminal block for the power supply is stackable and can be locked with two screws. Futhermore, both voltage inputs have got a reverse polarity protection. The voltage range for VDC 1 and VDC 2 is between 12 VDC and 70 VDC.. VDC1 VDC2 GND GND [Note] Please tighten the screws properly and check the correct holding of all connections. [Note] When wiring, please mind the appropriate cable cross-section of at least 0,5mm² or 12 ~ 24 AWG. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 11

17 Connecting the differential relay There is a potential free differential relay contact (semiconductor relay) at the clamps K1 to K4; K1 and K3 are the common connectors of the relay. If a voltage breakdown, a RJ45-port error or a fiber optic port error is detected, the differential relay drops down (K1-K2 closed and K3-K4 opened). K1 K2 K3 K4 Function of the contacts K1 K2: Differential relay contact: closes in case of errors Function of the contacts K3 K4: Differential relay contact: opens in case of errors The capacity of the differential relay contact is 25VDC (1A) or 60VDC ( 0,3A) [Note] When wiring, please mind the appropriate cable cross-section of at least 0,75mm 2 orr 12~ 24 AWG. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 12

18 Mounting on DIN rail As standard, e-light 2M has got a clip for 35mm DIN rails according to DIN EN For mounting the system please engage it onto the rail at the bottom side (see left picture), press it against the spring force to the top (1) and then towards the mounting plate (2). The system latches as shown in the picture at the right. Please refer to the above mentioned steps in reverse order to demount the switch. As an option, a wall mount kit is also available (art. no ). If the system should be fixed onto the wall, the clip for DIN rail mount has to be unscrewed first. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 13

19 Ports and dimensions The following view shows the ports and the dimensions of the e-light 2M switch: SUBJECT TO TECHNICAL ALTERATIONS SEITE : 14

20 Hardware Installation This paragraph describes how to install the e-light 2M switch: Procedure: 1. Unpack the switch. 2. Switch the device on. Tips regarding wiring can be found in the paragraph wiring the power supply. The power LED lights up. Its meaning can be found in the paragraph LED indications. 3. Prepare the twisted-pair cable (category 5) for the Ethernet connection.. 4. Put one end of the RJ45 cable into the Ethernet port (RJ45) of the switch and the other end into the Ethernet port of the network device, e.g. the switch, a PC or a server. The RJ45 port LED lights up when the cable is connected to the network device. The meaning of the LED signals can be found in the paragraph LED indications. 5. When all connections are established and the LEDs are flashing corresponingly, the installation has been completed properly. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 15

21 Network application This paragraph shows some sample applications of the switch. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 16

22 Ring Function The industrial switch supports the eks pathfinder ring mode (P-Ring) that helps the system to recover from network breakdowns within 300ms or less; that makes the network more reliable. The ring function is similar to the SPT (Spanning Tree Protocol), but its recovery time is shorter. The scheme below is an example of an application with ring function. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 17

23 Coupling Ring Application There can also be more than one ring group in a network. With the help of the coupling ring function, two rings can be connected with a redundant backup path. It ensures that the transmission between two ring groups works without any fault. In case of a link down on the main coupling path, the backup path hadles the communication betwenn the rings The scheme below is an example of a coupling ring application. To connect two rings the Coupling Ring function has to be activated on two switches in each ring (e.g. switch 1 and 2 as well as switch 5 and 8 in the second ring). In a first step the control ports have to be connected (e.g. switch 1 and 2 plus switch 5 and 8). Connections between the control ports has to be mady additionally to the common P-Ring connection. Each coupling port has to be connected with a coupling port of a switch in the other P-Ring group (e.g. switch 2 and 8 plus switch 1 and 5). Coupling port and control port have to be different from the P-Ring ports. [Note] Please to connect the control ports before you connect the backup path. Both control port connections have to established permanently. Otherwise the communication will be disconnected. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 18

24 Dual Homing Application The dual homing function prevents a connection loss between the ring group and the upper switches by connecting two switches per ring group to the upper switches. Each of the two switches has one connection upper level. Please assign two ports as dual homing ports which serve as backup ports within the ring group. Dual homing does only work when the ring function is active. Each ring group only has one dual homing port. [Note] In dual homing applications, the upper switches have to activate the rapid spanning tree protocol. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 19

25 Web-Based Management This paragraph describes the configuration and function of the web-based management. Preparations Before using the web management, please install the switch in the network and make sure that every PC in the network has access to the switch with the help of the web browser. The IP address, the subnet mask, the user name and the password are listed below: IP Address: Subnet Mask: Default Gateway: User Name: root Password: root System Login 1. Start the Webbrowser on your PC. 2. Please enter and the IP address of the switch, and press Enter. 3. The login mask will appear on the screen. 4. Please enter the user name and the password. The standard user name and password is root. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 20

26 5. Please press Enter or click OK, then the below shown web based management mask will appear. Toolbar View of front panel Configuration mask Home Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 21

27 Port Status The status depends on the user s settings. The table shows the following settings: Port: Port number. Type: Data rate and port:: 100TX = 100Mbps for RJ45 10TX = 10Mbps for RJ45 100FX = 100Mbps for the fiber optic port Link: Down means No Link. UP means Link. State: Shows the status disable, enable Negotiation: Shows the autonegotiation mode: auto/force. Speed Duplex: Shows the connection speed of the port Config shows the configured value. Actual shows the current port value. Flow Control: Shows the flow control status enable or disable in full duplex mode. Config shows the configured value. Actual shows the current port value. Port Status Interface Single Port Information Please click directly on a port in the picture of the device. Then the information SUBJECT TO TECHNICAL ALTERATIONS SEITE : 22

28 interface for the corresponding port opens. The current port information are shown. Port Information Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 23

29 Port Statistics The following table shows the port statistics Please click Clear to delete all figures Port Statistics Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 24

30 Port Control The following menu helps you to change the port status: Port: Please choose the port. State: Activate or deactivate the port. Negotiation: Set the autonegotiation mode to auto or assign the speed and duplex mode with the option force (recommended). Speed: Set the data rate of the port Duplex: Set the port to half duplex or duplex Flow control: Set the flow control in the duplex mode to Symmetric or Asymmetric. The default is Disable. Then please click Apply to apply the configurations set. After having chosen the port, you can see the values according to the table below Port Control Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 25

31 Switch Settings This paragraph describes how to determine the name, the location and the contact person. System Name: Determine the name of the switch. The maximum length is 64 characters System Description: Enter the description of the switch. System Location: Determine the location of the switch. The maximum length is 64 characters. System Contact: Enter the name of a contact person or the company. The maximum length is 64 characters. Firmware Version: Shows the firmware version. Kernel Version: Shows the Kernel version. Hardware Version: Shows the hardware version. MAC Address: Shows the MAC address Switch Settings Interface [Note] Please remember to save the confguration, otherwise it will get lost, when the switch is turned off. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 26

32 Port Mirroring Port mirroring is a method to monitor the traffic in certain ports. That means that the incoming and outgoing traffic in the ports monitored are duplicated in a mirror port. Port Mirroring Mode: Set the mode Disable or TX only or RX and TX both.. The default is Disable. Analysis Port: Here you can set the port to which the data traffic shall be mirrored. You can connect the mirror port to a LAN analyzer for instance. Monitor Port: Here you can choose which port data traffic shall be duplicated in the mirror port. 7 monitor ports in the switch can be chosen at the most. Tick the State box to chose the port that shall be monitored. Then please click Apply. Port Mirroring Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 27

33 [Note] 1. Chose disable in the mirror mode to deactivate the mirroring. 2. Please remember to save the configuration, otherwise it will get lost, when the switch is turned off. VLAN Configuration A virtual LAN (VLAN) is a logical network group that limits the broadcast domain. With the broadcast domain you can isolate the network traffic so that only the members of the VLAN communicate with each other. The switch supports port-based and tagged-based (802.1Q) VLAN. In the standard configuration, the VLAN operation mode is Disable. VLAN Konfiguration Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 28

34 Port-Based VLAN Packets can only be interchanged between members of the same VLAN group. Please keep in mind that all the unselected ports will be treated as if they belonged to a different VLAN. VLAN PortBase Interface Click Add to add a new VLAN group (64 VLAN groups are possible) SUBJECT TO TECHNICAL ALTERATIONS SEITE : 29

35 Enter the VLAN name and the group ID and then add the required ports to the VLAN group. Then please click Apply VLAN PortBase Add Interface The VLAN groups are listed To see more groups, please click Next Page To delete a VLAN Delete To modify an already existing group please click Edit [Note] Please remember to save the configuration, otherwise it will get lost, when the switch is turned off. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 30

36 802.1Q VLAN Tagged-based VLAN is a IEEE 802.1Q norm that allows setting up a VLAN between devices of different manufacturers. IEEE 802.1Q VLAN uses a technique to insert a tag into an Ethernet data frame. The tag contains a VLAN identifier (VID) that indictaes the VLAN numbers. All ports of the switch belong to a standard VLAN, the default VID is 1. The standard VLAN cannot be deleted. 64 VLAN groups are possible q VLAN Interface Basic Please click the Add button Management VLAN ID: Is used for remote management security. It supports the remote management inclusively Telnet and SNMP and browses the switch only when the SUBJECT TO TECHNICAL ALTERATIONS SEITE : 31

37 port ID (with which you have access to the management) in the VLAN and the VLAN ID are the same. Please enter the corresponding VLAN ID number into the column provided then click Apply to activate the function. Example: The management VLAN ID is 101, the ID of the VLAN group 101 contains port 1, 2 and 4. Therefore the ports 1, 2 and 4 support theremote management of the switch. If the port belongs to two different VLAn groups and one of the VLAN group IDs is the same as the management VLAN ID, the port can still carry out the remote management of the switch. Group Name: Enter a name for the VLAN VLAN ID: Enter a VLAN ID (2~4094). The default value is 1. Add the required ports and then please click Add 802.1q VLAN Add Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 32

38 Click Next and follow the steps in the next interface: Please click Apply to set if the outgoing VLAN frames are tagged or untagged Tag: Outgoing frames with VLAN tagged Untag: Outgoing frames without VLAN tagged Port VID: Configuration of the port VID settings Port VLAN ID: Please enter the port VLAN ID Then click Apply To reset to default value please click Default SUBJECT TO TECHNICAL ALTERATIONS SEITE : 33

39 802.1q VLAN Port VLAN ID Interface [Note] Please remember to save the configuration, otherwise it willget lost, if the switch is turned off. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 34

40 Alerts There are three kinds of alert , event and power alarm alerts that can be configured. Configuration of alerts If certain events occur, the system will send a message to the address given. You can set the mail server IP, the account and the forwarding function to receive the system alerts. Alert: Activate or deactivate the alert function. SMTP Server IP Address: Setting of the server IP address. Authentication: Tick the box to activate and configure the account and the password. Mail Account: Set the account in order to receive alerts. Ex.: The account entered in the column SMTP Server IP Address must exist on the mailserver. Password: The password of the account Confirm Password: Confirm the password. Address of Recipient 1 ~ 4: Enter 1 4 recipients who shall also receive the alert. Then please click apply Apply. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 35

41 Alert Configuration Interface Event configuration The events that have been chosen and have occured send an alert to the indicated SMTP server. You can also select port events to be alerted. System Event Selection: Allows the selection of the four system events device coldstart, power status, SMNP authentification fault and changes of the ring topology. Tick the box to select an event. If one of the selected events occurs Device Cold Start: In case of coldstart, the system sends an alert to the SMTP server Power Status: If the power supply status has changed, the system sends an alert to the SMTP server. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 36

42 SMNP Authentication Failure: If a SNMP authentification fault occurs, the system sends an alert to the SMTP server. Ring Topology Change: If the ring topology changes, the system sends an alert to the SMTP server. Selection of the port events: Select the events per port. There are 3 selection possibilities per port link up, link down and link up & link down. Disable means that the events of the port are not sent via . Link UP: The system sends an alert when the port connection is ok Link Down: The system sends an alert when the port connection is interrupted Link UP & Link Down: The system sends an alert when the port connection is ok or interrupted Then please click Apply. Event Configuration Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 37

43 Power alarm configuration The power alarm configuration activates the relay contact. Without activating the power alarm function the relay alarm will not work. Tick the box if you want to monitor the power supply and then click Apply Power Alarm Interface IP Configuration You can configure the IP settings and the DHCP client function: DHCP Client: Activating and deactivating the DHCP client function: When the DHCP client function is active, the DHCP network server assigns an IP address to the switch. After having clicked on Apply, a pop-up will open. This pop-up shows that the DHCP client is activated. The current IP is then substituted by a new one. To cancel the DHCP client function, please click Cancel. IP Address: Enter the IP address of the network. When the DHCP function is activated, you do not need to enter the IP address. The DHCP network server determines the IP address of the switch and shows it in the corresponding column. The default IP is SUBJECT TO TECHNICAL ALTERATIONS SEITE : 38

44 Subnet Mask: Enter the subnet mask of the IP address. When the DHCP client function is activated, you do not need to enter the subnet mask. Gateway: Enter the gateway of the switch, the default value is Then please click Apply. IP Konfiguration Interface SNTP Configuration In this paragraph you can configure the SNTP (Simple Network Time Protocol) SNTP Client: Activating or deactivating the SNTP function in order to receive the time from the SNTP server. Daylight Saving Time: Activating or deactivating the summer time function: If the summer time function is activated, you have to configure the time period of the summer time. UTC Timezone: Setting the time zones: The table below contains the different time zones. You can scroll down to find the requested time zone. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 39

45 Local Time Zone Conversion Time at from UTC 12:00 UTC November Time Zone - 1 hour 11am Oscar Time Zone -2 hours 10 am ADT Atlantic Daylight -3 hours 9 am AST Atlantic Standard EDT Eastern Daylight -4 hours 8 am EST Eastern Standard CDT Central Daylight -5 hours 7 am CST Central Standard MDT Mountain Daylight -6 hours 6 am MST Mountain Standard PDT - Pacific Daylight -7 hours 5 am PST - Pacific Standard ADT - Alaskan Daylight -8 hours 4 am ALA - Alaskan Standard -9 hours 3 am HAW - Hawaiian Standard -10 hours 2 am Nome, Alaska -11 hours 1 am CET - Central European FWT - French Winter MET - Middle European MEWT +1 hour 1 pm Middle European Winter SWT - Swedish Winter EET - Eastern European,USSR Zone 1 +2 hours 2 pm BT - Baghdad, USSR Zone 2 +3 hours 3 pm ZP4 - USSR Zone 3 +4 hours 4 pm ZP5 - USSR Zone 4 +5 hours 5 pm ZP6 - USSR Zone 5 +6 hours 6 pm WAST West Australian Standard +7 hours 7 pm SUBJECT TO TECHNICAL ALTERATIONS SEITE : 40

46 CCT - China Coast USSR Zone 7 JST - Japan Standard, USSR Zone 8 EAST - East Australian Standard GST Guam Standard USSR Zone 9 IDLE - International Date Line NZST - New Zealand Standard NZT - New Zealand +8 hours 8 pm +9 hours 9 pm +10 hours 10 pm +12 hours Midnight SNTP Server IP: Setting the SNTP server s IP address. Switch Timer: Current switch time. Daylight Saving Period: Setting the beginng and end of the summer time. The times change every year. Daylight Saving Offset (Minutes): Configuration of the offset value. Then please click Apply. [Note] Please remember to save the configuration, otherwise it will get lost when the switch is turned off. SNTP Configuration SUBJECT TO TECHNICAL ALTERATIONS SEITE : 41

47 IP Security The IP security function allows you to enter 10 specific IP addresses that have access to the switch via the web browser in order to secure the management of the switch. Enable the IP Security: Tick the box to activate IP security. Security IP 1 ~ 10: Enter up to 10 specific IP addresses. Only these 10 IP addresses have acces to the switch and can be managed with the help of the web browser. Then please click Apply to apply the configuration. [Note] Please remember to save the configuration, otherwise it will get lost when the switch is turned off. IP Security Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 42

48 RSTP Configuration The Rapid Spanning Tree Protocol is a further development of the Spanning Tree Protocol and offers a faster convergence after a change in topology. Furthermore, the system supports STP and auto-detects the connected device with STP and RSTP. System confirguration You can see the spanning tree information via the root bridge. Please configure the RSTP status and then click Apply RSTP mode: Activate or deactivate the RSTP function before you configure the corresponding parameters. Priority ( ): The value that is used for identifying the root bridge. The bridge with the lowest value has highest priority and is chosen as root. If the value is changed you have to reboot the switch. According to the standard rules of the protocol, the value has to be a multiple of Max Age (6-40): The number of seconds a bridge waits until it tries to reconfigure, without receiving alerts of the spanning tree configuration protocol. Please enter a value between 6 and 40. Hello Time (1-10): The time in which the switch sends a BPDU packet in order to check the current status of the RSTP. Please enter a value between 1 and 10. Forward Delay Time (4-30): The number of seconds the ports waits until it switches from the RSTP Learning and Listening status to the Forwarding status. Please enter a value between 4 and 30. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 43

49 [Note] 1. Please follow the below written rule to configure MAX Age, Hello Time and Forward Delay Time. 2 x (Forward Delay Time value 1) > = Max Age value >= 2 x (Hello Time value +1) 2. Please remember to save the configuration, otherwise it will get lost when the switch is turned off. RSTP System Configuration Interface SUBJECT TO TECHNICAL ALTERATIONS SEITE : 44

50 Per Port Configuration Configuration of the costs and priority of each port. Choose a port from the column port. Path Cost: The costs from the sending bridge at the respective port to the other bridge. Please enter a number between 1 and Priority: Decide which port within the LAN shall be blocked. Please enter a number between 0 and 240. The value has to be a mutliple of 16. Admin P2P: Some of the status transactions that are possible within the RSTP depend on the port being connected to exactly one bridge (Ex.: If it is operated by a point to point LAN segment) or to two or more bridges (Ex.: If it is operated by a shared LAN). This function allows operating the point to point status of the link administratively. Admin Edge: The port that is directly linked to a terminal cannot form a bridging loop in the network. In order to configure the port as edge-port, please set the port status to true. Admin Non STP: The port contains a mathematical calculation. True doesn t contain this mathematical STP calculation. False does. Then please click Apply. [Note] Please remember to save the configuration, otherwise it will get lost when the switch is turned off. SUBJECT TO TECHNICAL ALTERATIONS SEITE : 45

8-Port 10/100TX SNMP Managed Industrial Ethernet Switch with Redundant Ring

8-Port 10/100TX SNMP Managed Industrial Ethernet Switch with Redundant Ring 8-Port 10/100TX SNMP Managed Industrial Ethernet Switch with Redundant Ring User Manual FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant

More information

SISTM10xx-162-LR(T) (6) 10/100Base-TX + (2) 100Base-FX Industrial Managed Switch. Installation Manual. Rev. 1

SISTM10xx-162-LR(T) (6) 10/100Base-TX + (2) 100Base-FX Industrial Managed Switch. Installation Manual. Rev. 1 SISTM10xx-162-LR(T) (6) 10/100Base-TX + (2) 100Base-FX Industrial Managed Switch Installation Manual Rev. 1 25-October-2007 Notice This manual contents are based on the below table listing software kernel

More information

Management Software. Web Browser User s Guide AT-S106. For the AT-GS950/48 Gigabit Ethernet Smart Switch. Version 1.0.0. 613-001339 Rev.

Management Software. Web Browser User s Guide AT-S106. For the AT-GS950/48 Gigabit Ethernet Smart Switch. Version 1.0.0. 613-001339 Rev. Management Software AT-S106 Web Browser User s Guide For the AT-GS950/48 Gigabit Ethernet Smart Switch Version 1.0.0 613-001339 Rev. A Copyright 2010 Allied Telesis, Inc. All rights reserved. No part of

More information

HARTING mcon 1000 Introduction and features

HARTING mcon 1000 Introduction and features Introduction and features HARTING mcon 1000 es, managed, for mounting onto top-hat mounting rail in control cabinets General Description Features Supporting Ethernet (10 Mbit/s), Fast Ethernet (100 Mbit/s)

More information

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual

5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual 5-port / 8-port 10/100BaseTX Industrial Ethernet Switch User Manual Content Overview... 1 Introduction... 1 Features... 3 Packing List... 4 Safety Precaution... 4 Hardware Description... 5 Front Panel...

More information

Expert Line Managed Industrial Switch with M-Ring Function 16x 10/100 Base-TX, 2x 10/100/1000Base-T (100/1000 Base-X SFP Ports)

Expert Line Managed Industrial Switch with M-Ring Function 16x 10/100 Base-TX, 2x 10/100/1000Base-T (100/1000 Base-X SFP Ports) MICROSENS Expert Line Managed Industrial Switch with M-Ring Function 16x 10/100 Base-TX, 2x 10/100/1000Base-T (100/1000 Base-X SFP Ports) General Ethernet is an international standard that has been proven

More information

SHEET. Skorpion Managed Ethernet Switch Series. EISK8M Series

SHEET. Skorpion Managed Ethernet Switch Series. EISK8M Series EISK8M Series d a t a SHEET Skorpion Managed Ethernet Switch Series The EISK8M Series offers a compact rugged managed 10/100 Mbps Ethernet switch with a choice of eight copper ports or a mix of six copper

More information

Ha-VIS FTS 3000 Introduction and features

Ha-VIS FTS 3000 Introduction and features Ha-VIS Introduction and features Ethernet Switch Ha-VIS FTS 3100s-A 10-port Ethernet Switch with Fast Track Technology configurable via USB General Description Features The Fast Ethernet Switches of the

More information

16-PORT POWER OVER ETHERNET WEB SMART SWITCH

16-PORT POWER OVER ETHERNET WEB SMART SWITCH 16-PORT POWER OVER ETHERNET WEB SMART SWITCH User s Manual (DN-95312) - 0 - Content Web Smart Switch Configure login ---------------------------------- 2 Administrator Authentication Configuration ---------------------------------------------

More information

HARTING Ha-VIS Management Software

HARTING Ha-VIS Management Software HARTING Ha-VIS Management Software People Power Partnership HARTING Management Software Network Management Automation IT - with mcon Switches from HARTING With the Ha-VIS mcon families, HARTING has expanded

More information

LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual

LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual LevelOne IFE-0500 4-Port PoE + 1-Port TP Industrial Fast Ethernet Switch User Manual Ver. 1.0.0-0711 1 FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital

More information

Management Software. User s Guide AT-S84. For the AT-9000/24 Layer 2 Gigabit Ethernet Switch. Version 1.1. 613-000368 Rev. B

Management Software. User s Guide AT-S84. For the AT-9000/24 Layer 2 Gigabit Ethernet Switch. Version 1.1. 613-000368 Rev. B Management Software AT-S84 User s Guide For the AT-9000/24 Layer 2 Gigabit Ethernet Switch Version 1.1 613-000368 Rev. B Copyright 2006 Allied Telesyn, Inc. All rights reserved. No part of this publication

More information

AT-GS950/8. AT-GS950/8 Web Users Guide AT-S107 [1.00.043] Gigabit Ethernet Smart Switch. 613-001484 Rev A

AT-GS950/8. AT-GS950/8 Web Users Guide AT-S107 [1.00.043] Gigabit Ethernet Smart Switch. 613-001484 Rev A AT-GS950/8 Gigabit Ethernet Smart Switch AT-GS950/8 Web Users Guide AT-S107 [1.00.043] 613-001484 Rev A Copyright 2011 Allied Telesis, Inc. All rights reserved. No part of this publication may be reproduced

More information

AT-S60 Version 1.1.4 Management Software for the AT-8400 Series Switch. Software Release Notes

AT-S60 Version 1.1.4 Management Software for the AT-8400 Series Switch. Software Release Notes AT-S60 Version 1.1.4 Management Software for the AT-8400 Series Switch Supported Platforms Software Release Notes Please read this document before you begin to use the AT-S60 management software. The AT-S60

More information

IES-3080/3062 Series. Industrial 8-port managed Ethernet switch. Features. Introduction

IES-3080/3062 Series. Industrial 8-port managed Ethernet switch. Features. Introduction IES-3080/3062 Series Features Industrial 8-port managed Ethernet switch Fastest Redundant Ethernet Ring: O-Ring (recovery time < 10ms over 250 units of connection) Open-Ring supports the other vendor s

More information

4 Ports + 3 SFP Gigabit Smart Switch Use Manual. Ver.A0

4 Ports + 3 SFP Gigabit Smart Switch Use Manual. Ver.A0 4 Ports + 3 SFP Gigabit Smart Switch Use Manual Ver.A0 Chapter 1 Product Specification 1.1 Product Characteristics Complies with IEEE802.3,IEEE802.3u,IEEE802.3ab standards; 4 10/100/1000Mbps Auto-Negotiation

More information

Management Software. User s Guide AT-S88. For the AT-FS750/24POE Fast Ethernet Smart Switch. Version 1.0. 613-000555 Rev. B

Management Software. User s Guide AT-S88. For the AT-FS750/24POE Fast Ethernet Smart Switch. Version 1.0. 613-000555 Rev. B Management Software AT-S88 User s Guide For the AT-FS750/24POE Fast Ethernet Smart Switch Version 1.0 613-000555 Rev. B Copyright 2007 Allied Telesis, Inc. All rights reserved. No part of this publication

More information

Easy Smart Configuration Utility

Easy Smart Configuration Utility Easy Smart Configuration Utility REV1.1.0 1910010977 CONTENTS Chapter 1 About this Guide...1 1.1 Intended Readers... 1 1.2 Conventions... 1 1.3 Overview of This Guide... 1 Chapter 2 Getting Started...4

More information

MICROSENS. Installation Switch with PoE (5x10/100Base-TX) and fiber uplink (1x100Base-FX) General. Features

MICROSENS. Installation Switch with PoE (5x10/100Base-TX) and fiber uplink (1x100Base-FX) General. Features Installation Switch with PoE (5x10/100Base-TX) and fiber uplink (1x100Base-FX) MICROSENS General The MICROSENS Installation Switch enables the connection of 5 end devices via twisted pair cable which also

More information

ENTERASYS WEBVIEW WEB-BASED MANAGEMENT FOR THE VH-2402S/VH-2402S2 WEB MANAGEMENT GUIDE

ENTERASYS WEBVIEW WEB-BASED MANAGEMENT FOR THE VH-2402S/VH-2402S2 WEB MANAGEMENT GUIDE ENTERASYS WEBVIEW WEB-BASED MANAGEMENT FOR THE VH-2402S/VH-2402S2 WEB MANAGEMENT GUIDE 9033821 Notice NOTICE Enterasys Networks reserves the right to make changes in specifications and other information

More information

Turning Copper into Gold

Turning Copper into Gold Product Description: Turning Copper into Gold Smart ethernet switch filled in a gap between non-web management switch and full web management switch, it not only with many functions of L2 full WEB management

More information

Intel Express 460T Standalone Switch

Intel Express 460T Standalone Switch Intel Express 460T Standalone Switch User Guide Copyright 2001, Intel Corporation. All rights reserved. Intel Corporation, 5200 NE Elam Young Parkway, Hillsboro OR 97124-6497 Intel Corporation assumes

More information

WSG24POE Switch. User Manual

WSG24POE Switch. User Manual WSG24POE Switch User Manual Version: 01/01/2011 Introduction! 4 Product Overview! 4 Specifications! 5 Package Contents! 5 Hardware Description! 6 Physical Dimensions/ Weight! 6 Front Panel! 6 LED Indicators!

More information

HARTING econ 4000 Introduction and features

HARTING econ 4000 Introduction and features HARTING econ 4000 Introduction and features HARTING econ 4000 es, unmanaged, for flat wall mounting General Description The Fast es of the product family HARTING econ 4000 are recommended for use in the

More information

Alcalde # 1822 Col. Miraflores C.P. 44270 Guadalajara, Jal. México MX 01 (33) 3854-5975 y 3823-4349 USA 001 (858)-869-5401 (Chulavista, CA.

Alcalde # 1822 Col. Miraflores C.P. 44270 Guadalajara, Jal. México MX 01 (33) 3854-5975 y 3823-4349 USA 001 (858)-869-5401 (Chulavista, CA. Tu Sitio de Automatización! LBJetNet385628G Introduction The LBJetNet385628G is an Industrial Modular Managed Ethernet Switch, equipped with 3 modular slot for maximum 24 10/100 Base-TX Ports or 18 100Base-FX

More information

Gigabit Switching Ethernet Media Converters - Product User Guide

Gigabit Switching Ethernet Media Converters - Product User Guide Gigabit Switching Ethernet Media Converters - Product User Guide PL0338 Issue3 Introduction These Tyco Electronics Gigabit Media Converters translate between 1000Base-T copper and 1000Base-X fiber optic

More information

FCC Certifications. CE Mark Warning

FCC Certifications. CE Mark Warning FCC Certifications This Equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable

More information

SNMP Web card. User s Manual. Management Software for Uninterruptible Power Supply Systems

SNMP Web card. User s Manual. Management Software for Uninterruptible Power Supply Systems SNMP Web card User s Manual Management Software for Uninterruptible Power Supply Systems Table of Contents 1. Overview... 3 1.1 Introduction... 3 1.2 Features... 3 1.3 Overlook... 3 1.4 Installation and

More information

Manual. IP Sensor and Watchdog IPSW2210. I P S W 2 2 1 0 M a n u a l P a g e 1. Relay Output. Power input. 12VDC adapter LED Indicators. 2 Dry.

Manual. IP Sensor and Watchdog IPSW2210. I P S W 2 2 1 0 M a n u a l P a g e 1. Relay Output. Power input. 12VDC adapter LED Indicators. 2 Dry. IP Sensor and Watchdog IPSW2210 Manual Relay Output Power input 12VDC adapter LED Indicators 1 wire 2 Dry Output Green : Power Yellow: Link temperature & humidity contact inputs LED indicator sensor input

More information

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter

Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter ICS-2 S15 Industrial RS-232/ RS-422/ RS-485 over Ethernet Media Converter Cost Effective Solution for RS-232 / RS-422 / RS-485 to Industrial Ethernet Application PLANET ICS-210x series Smart Media Converter

More information

TP-LINK. JetStream 28-Port Gigabit Stackable L3 Managed Switch. Overview. Datasheet T3700G-28TQ. www.tp-link.com

TP-LINK. JetStream 28-Port Gigabit Stackable L3 Managed Switch. Overview. Datasheet T3700G-28TQ. www.tp-link.com TP-LINK JetStream 28-Port Gigabit Stackable L3 Managed Switch Overview TP-LINK s is an L3 managed switch designed to build a highly accessible, scalable, and robust network. The switch is equipped with

More information

24 Port Gigabit Ethernet Web Smart Switch. Users Manual

24 Port Gigabit Ethernet Web Smart Switch. Users Manual 24 Port Gigabit Ethernet Web Smart Switch Users Manual Content Web Smart Switch Configure login -------------------------------- 2 Configuration System Configuration ---------------------------------------------------

More information

EtherDevice Switch EDS-726 Series

EtherDevice Switch EDS-726 Series Managed Redundant EtherDevice TM Switch Solutions EtherDevice Switch EDS-726 Series 26-Port Gigabit Ethernet Switch Modular, Managed, Redundant Features Industrial Networking Capability Redundant Gigabit

More information

ALL8894WMP. User s Manual. 8-Port 10/100/1000Mbps with 4-port PoE. Web Management Switch

ALL8894WMP. User s Manual. 8-Port 10/100/1000Mbps with 4-port PoE. Web Management Switch ALL8894WMP 8-Port 10/100/1000Mbps with 4-port PoE Web Management Switch User s Manual Content Content I Introduction..3 Product Overview.3 Web Management Feature.3 Specification..4 Mechanical...4 Performance...5

More information

ALL0484WMP. User Manual

ALL0484WMP. User Manual ALL0484WMP 24 Port 10/100TX Full PWR PoE and 2 Gigabit TP/SFP Web Management Switch User Manual Web Smart Switch Configure ALL0484WMP User Manual Please follow the steps to configure this Web Smart switch.

More information

8-Port Gigabit managed POE Switch. User s Manual. Version: 2.3

8-Port Gigabit managed POE Switch. User s Manual. Version: 2.3 8-Port Gigabit managed POE Switch User s Manual Version: 2.3 September 9, 2007 1 TABLE OF CONTENT 1.0 INTRODUCTION... 3 1.1 MAIN FEATURES... 3 1.2 START TO MANAGE THIS SWITCH... 5 2.0 WEB MANAGEMENT...

More information

20 GE + 4 GE Combo SFP + 2 10G Slots L3 Managed Stackable Switch

20 GE + 4 GE Combo SFP + 2 10G Slots L3 Managed Stackable Switch GTL-2691 Version: 1 Modules are to be ordered separately. 20 GE + 4 GE Combo SFP + 2 10G Slots L3 Managed Stackable Switch The LevelOne GEL-2691 is a Layer 3 Managed switch with 24 x 1000Base-T ports associated

More information

TP-LINK L2 Managed Switch

TP-LINK L2 Managed Switch NEW TP-LINK L2 Managed Switch TM NEW TL-SL3428/TL-SL3452 Overview TP-LINK JetStream TM L2 managed switch TL-SL3428/TL-SL3452 provides 24/48 10/100Mbps ports, the switch provide high performance, enterprise-level

More information

EGS7228P. Business Class EGS7228P. 24-port Gigabit AT PoE + 4SFP Smart Switch PRODUCT OVERVIEW

EGS7228P. Business Class EGS7228P. 24-port Gigabit AT PoE + 4SFP Smart Switch PRODUCT OVERVIEW 24-port Gigabit AT PoE + 4SFP Smart Switch PRODUCT OVERVIEW EnGenius Smart PoE Switch family is special tailored for Access Points and IP surveillance applications., one of the members from EnGenius Smart

More information

784 INTELLIGENT TRANSPORTATION SYSTEMS NETWORK DEVICES. (REV 11-17-11) (FA 1-5-12) (7-12)

784 INTELLIGENT TRANSPORTATION SYSTEMS NETWORK DEVICES. (REV 11-17-11) (FA 1-5-12) (7-12) 784 INTELLIGENT TRANSPORTATION SYSTEMS NETWORK DEVICES. (REV 11-17-11) (FA 1-5-12) (7-12) SUBARTICLE 784-1.2.2 (of the Supplemental Specifications) is deleted and the 784-1.2.2 Networking Standards: Ensure

More information

TP-LINK. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch. Overview. Datasheet TL-SL3428. www.tp-link.com

TP-LINK. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch. Overview. Datasheet TL-SL3428. www.tp-link.com TP-LINK TM 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch Overview TP-LINK JetStream TM gigabit L2 managed switch provides 24 10/100Mbps ports. The switch provides high performance, enterprise-level

More information

netis Web Management Switch User's Guide Manual Version:1.1: 2015-03-12-1

netis Web Management Switch User's Guide Manual Version:1.1: 2015-03-12-1 netis Web Management Switch User's Guide Manual Version:1.1: 2015-03-12-1 1 COPYRIGHT & TRADEMARKS Specifications are subject to change without notice. NETIS is a registered trademark of NETCORE Technologies

More information

Cisco SRW2024P 24-Port Gigabit Switch: WebView/PoE Cisco Small Business Managed Switches

Cisco SRW2024P 24-Port Gigabit Switch: WebView/PoE Cisco Small Business Managed Switches Cisco SRW2024P 24-Port Gigabit Switch: WebView/PoE Cisco Small Business Managed Switches Reliable, Intelligent Switching for Growing Businesses Highlights 24 high-speed ports optimized for the network

More information

TP-LINK. 24-Port Gigabit Smart PoE Switch with 4 Combo SFP Slots. Overview. Datasheet TL-SG2424P. www.tp-link.com

TP-LINK. 24-Port Gigabit Smart PoE Switch with 4 Combo SFP Slots. Overview. Datasheet TL-SG2424P. www.tp-link.com Power Budget TP-LINK 24-Port Gigabit Smart PoE Switch with 4 Combo SFP Slots Overview The provides 24 10/100/1000Mbps ports that supports 802.3at/af-compliant PoE, with a total PoE power supply up to 180W,

More information

Copper to Fiber Stand-Alone Media Converter. Quick Installation Guide

Copper to Fiber Stand-Alone Media Converter. Quick Installation Guide Copper to Fiber Stand-Alone Media Converter Quick Installation Guide Model No. FVT-2001 FVT-2002 FVT-2201 FVT-2401 GVT-2000 GVT-2001 Description 10/100BASE-TX to 100BASE-FX MMF SC Converter, 2km 10/100BASE-TX

More information

ProSafe Plus Switch Utility

ProSafe Plus Switch Utility ProSafe Plus Switch Utility User Guide 350 East Plumeria Drive San Jose, CA 95134 USA September 2010 202-10524-03 v1.0 ProSafe Plus Switch Utility User Guide 2010 NETGEAR, Inc. All rights reserved. No

More information

TP-LINK. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch. Overview. Datasheet TL-SL5428E. www.tp-link.com

TP-LINK. 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch. Overview. Datasheet TL-SL5428E. www.tp-link.com TP-LINK 24-Port 10/100Mbps + 4-Port Gigabit L2 Managed Switch Overview TP-LINK JetStream L2 managed switch provides high performance, enterprise-level QoS, advanced security strategies and rich layer 2

More information

Manageable 10/100/1000 Mbs Ethernet Modular Multi-Media Switch

Manageable 10/100/1000 Mbs Ethernet Modular Multi-Media Switch Manageable 10/100/1000 Mbs Ethernet Modular Multi-Media Switch CMX-2400G SNMP/Web Manageable, Modular Switch chassis with two GBIC slots Features: Modules with eight 10/100 UTP or LC Fiber ports: CMX-8TX,

More information

Ethernet Link SGI-4844F

Ethernet Link SGI-4844F Ethernet Link SGI-4844F 44 ports 100/1000Mbps SFP + 4 Combo port RJ-45 + 100/1000Mbps SFP slot Layer 2+ Managed Ethernet Switch Overview LinkPro SGI-4844F is a layer-2+ gigabit access switch equipped with

More information

Cisco SLM2048 48-Port Gigabit Smart Switch Cisco Small Business Smart Switches

Cisco SLM2048 48-Port Gigabit Smart Switch Cisco Small Business Smart Switches Cisco SLM2048 48-Port Gigabit Smart Switch Cisco Small Business Smart Switches Cost-Effective, Secure Switching with Simplified Management for Your Growing Business Highlights Easy-to-use web browser interface

More information

Chapter 3 Management. Remote Management

Chapter 3 Management. Remote Management Chapter 3 Management This chapter describes how to use the management features of your ProSafe 802.11a/g Dual Band Wireless Access Point WAG102. To access these features, connect to the WAG102 as described

More information

4 10/100/1000TX + 1 Mini-GBIC Switch. User Manual MS453510

4 10/100/1000TX + 1 Mini-GBIC Switch. User Manual MS453510 4 10/100/1000TX + 1 Mini-GBIC Switch User Manual MS453510 CE Mark Warning This is a Class-A product. In a domestic environment this product may cause radio interference in which case the user may be required

More information

ALLNET ALL8944WMP Layer 2 Management 24 Port Giga PoE Current Sharing Switch

ALLNET ALL8944WMP Layer 2 Management 24 Port Giga PoE Current Sharing Switch ALLNET ALL8944WMP Layer 2 Management 24 Port Giga PoE Current Sharing Switch 24-Port Giga PoE Current Sharing Pv6 and IPv4 Dual Protocol SNMP v1/v2c/v3 SSH version 2.0 Authentication TACACS+ Jumbo Frames

More information

20 GE PoE-Plus + 4 GE PoE-Plus Combo SFP + 2 GE SFP L2 Managed Switch, 370W

20 GE PoE-Plus + 4 GE PoE-Plus Combo SFP + 2 GE SFP L2 Managed Switch, 370W GEP-2672 Version: 1 20 GE PoE-Plus + 4 GE PoE-Plus Combo SFP + 2 GE SFP L2 Managed Switch, 370W The LevelOne GEP-2672 is a Layer 2 Managed switch with 24 x 1000Base-T PoE-Plus ports associated with 4 x

More information

Cisco Small Business Managed Switches

Cisco Small Business Managed Switches Cisco SRW224P 24-Port 10/100 + 2-Port Gigabit Switch: WebView/PoE Cisco Small Business Managed Switches Secure, Reliable, Intelligent Switching with PoE for Growing Businesses Highlights Connects up to

More information

TrueAlarm Fire Alarm Systems

TrueAlarm Fire Alarm Systems TrueAlarm Systems UL, ULC, CSFM Listed; FM Approved* Network Annunciators; es Features Provides a dedicated local area network (LAN) for connection of a TrueSite workstation server to remote clients: es

More information

Ethernet Link SGI-2424

Ethernet Link SGI-2424 Ethernet Link SGI-2424 24 Combo Ports (10/100/1000Mbps Copper and Dual-Speed SFP) + 2G TP/SFP Combo Layer 2+ Managed Gigabit Ethernet Switch Overview LinkPro SGI-2424 is a layer-2+ gigabit access switch

More information

FL SWITCH SF... Factory Line Switches With Standard Functions. Data Sheet

FL SWITCH SF... Factory Line Switches With Standard Functions. Data Sheet Factory Line Switches With Standard Functions Data Sheet 05/2004 This data sheet is valid for the following products: FL SWITCH SF 8TX FL SWITCH SF 7TX/FX FL SWITCH SF 6TX/2FX FL SWITCH SF 16TX FL SWITCH

More information

B&B ELECTRONICS WHITE PAPER. Managed Ethernet Switches - Key Features for a Powerful Industrial Network

B&B ELECTRONICS WHITE PAPER. Managed Ethernet Switches - Key Features for a Powerful Industrial Network Determinism is the assurance that control/communication will occur in a set period of time. Ethernet was nondeterministic at first, and not widely used for industrial purposes. Ethernet switches designed

More information

Cisco Small Business Smart Switches

Cisco Small Business Smart Switches Cisco SLM224G4S 24-Port 10/100 + 4-Port Gigabit Smart Switch: RCT Cisco Small Business Smart Switches Cost-Effective, Highly Secure Switching with Simplified Management for Growing Businesses Highlights

More information

AT-S41 Version 1.1.4 Management Software for the AT-8326 and AT-8350 Series Fast Ethernet Switches. Software Release Notes

AT-S41 Version 1.1.4 Management Software for the AT-8326 and AT-8350 Series Fast Ethernet Switches. Software Release Notes AT-S41 Version 1.1.4 Management Software for the AT-8326 and AT-8350 Series Fast Ethernet Switches Software Release Notes Please read this document before you begin to use the AT-S41 management software.

More information

Ethernet Switch EDS-518A Series

Ethernet Switch EDS-518A Series Managed Ethernet Switch Solutions EtherDevice Switch EDS-518A Series 16+2G-Port Gigabit Managed Redundant Ethernet Switch Highlights 2 Gigabit plus 16 fast Ethernet ports for copper and fiber Gigabit Turbo

More information

HP ProCurve High-Speed Transceivers Installation Guide

HP ProCurve High-Speed Transceivers Installation Guide HP ProCurve High-Speed Transceivers Installation Guide Introduction The HP ProCurve High-Speed Transceivers can be installed into a number of HP ProCurve networking devices to provide 100 Mbps and 1000

More information

HARTING econ 3000 Introduction and features

HARTING econ 3000 Introduction and features HARTING Introduction and features HARTING es, unmanaged, for installation in control cabinets General Description Features The Fast es of the product family HARTING are suitable for industrial applications

More information

TP-LINK. 24-Port Gigabit Smart Switch with 4 SFP Slots. Overview. Datasheet T1600G-28TS (TL-SG2424) www.tp-link.com

TP-LINK. 24-Port Gigabit Smart Switch with 4 SFP Slots. Overview. Datasheet T1600G-28TS (TL-SG2424) www.tp-link.com TP-LINK 24-Port Gigabit Smart Switch with 4 SFP Slots Overview TP-LINK JetStream Gigabit Smart Switch T1600G-28TS is a cost-effective product solution for small and medium-sized business which provides

More information

Network Management Card. User Manual

Network Management Card. User Manual User Manual 1 Contents Contents 2 Chapter 1 Overview 3 1.1 NMC package contents 4 1.2 NMC CD Resources 4 1.3 Features 4 1.4 NMC Applications 5 Chapter 2 NMC parameters setting via serial COM port 6 2.1

More information

TDP43ME NetPS. Network Printer Server. Control Center. for Ethernet Module

TDP43ME NetPS. Network Printer Server. Control Center. for Ethernet Module Panduit Corp. 2010 TDP43ME NetPS PA26306A01 Rev. 01 11-2010 Network Printer Server Control Center for Ethernet Module NOTE: In the interest of higher quality and value, Panduit products are continually

More information

ALLNET ALL-SG8926PM Layer 2 FULL Management 24 Port Giga PoE Current Sharing Switch IEEE802.3at/af

ALLNET ALL-SG8926PM Layer 2 FULL Management 24 Port Giga PoE Current Sharing Switch IEEE802.3at/af ALLNET ALL-SG8926PM Layer 2 FULL Management 24 Port Giga PoE Current Sharing Switch IEEE802.3at/af 24-Port Giga PoE Current Sharing 500W PoE Budget IPv6 and IPv4 Dual Protocol SNMP v1/v2c/v3 SSH version

More information

DCS-3950-52C Fast Ethernet Intelligent Access Switch Datasheet

DCS-3950-52C Fast Ethernet Intelligent Access Switch Datasheet DCS-3950-52C Fast Ethernet Intelligent Access Switch Datasheet DCS-3950-52C Product Overview DCS-3950-52C switch is Fast Ethernet intelligent security access switch for carrier and MAN networks. It supports

More information

JetNet 5428Gv2. Features. Industrial 24FE+4G Gigabit Managed Ethernet Switch INDUSTRIAL ETHERNET RACKMOUNT SWITCH

JetNet 5428Gv2. Features. Industrial 24FE+4G Gigabit Managed Ethernet Switch INDUSTRIAL ETHERNET RACKMOUNT SWITCH INDUSTRIAL ETHERNET RACKMOUNT SWITCH Industrial 24FE+4G Gigabit Managed Ethernet Switch JetNet 5428Gv2 The JetNet 5428G is a 19-inch Gigabit Layer 2+ Industrial switch, equipped with 24 100 Base-TX ports

More information

Broadband Router ESG-103. User s Guide

Broadband Router ESG-103. User s Guide Broadband Router ESG-103 User s Guide FCC Warning This equipment has been tested and found to comply with the limits for Class A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits

More information

TP-LINK. Gigabit L2 Managed Switch. Overview. Datasheet TL-SG3216 / TL-SG3424. www.tp-link.com

TP-LINK. Gigabit L2 Managed Switch. Overview. Datasheet TL-SG3216 / TL-SG3424. www.tp-link.com TP-LINK TM Gigabit L2 Managed Switch TL-SG3216 / TL-SG3424 Overview TP-LINK JetStream TM gigabit L2 managed switch 3 series family consists of two switches: TL-SG3216 with 16 10/100/1000Mbps ports and

More information

SETUP GUIDE SNMP ALARM ADAPTOR COMPATIBLE WITH SIGMA, RADIAN, TPCMQ, auro-he & BLUEstreak POWER SHELVES

SETUP GUIDE SNMP ALARM ADAPTOR COMPATIBLE WITH SIGMA, RADIAN, TPCMQ, auro-he & BLUEstreak POWER SHELVES SNMP ALARM ADAPTOR COMPATIBLE WITH SIGMA, RADIAN, TPCMQ, auro-he & BLUEstreak POWER SHELVES www.unipowerco.com 2014 UNIPOWER LLC All Rights Reserved NORTH AMERICA 3900 Coral Ridge Drive, Coral Springs,

More information

AT-S63 and AT-S63 NE Version 1.0.0 Management Software for the AT-9400 Series Layer 2+ Gigabit Ethernet Switches Software Release Notes

AT-S63 and AT-S63 NE Version 1.0.0 Management Software for the AT-9400 Series Layer 2+ Gigabit Ethernet Switches Software Release Notes AT-S63 and AT-S63 NE Version 1.0.0 Management Software for the AT-9400 Series Layer 2+ Gigabit Ethernet Switches Software Release Notes Supported Platforms Please read this document before you begin to

More information

MICROSENS. 45x45 Installation Switch for FTTO applications. Introduction. Characteristics

MICROSENS. 45x45 Installation Switch for FTTO applications. Introduction. Characteristics 45x45 Installation Switch for FTTO applications MICROSENS Introduction Current versions of the 45x45 installation switch are usually employed in cable channels and floor boxes in FTTO (Fiber-to-the-office)

More information

User Manual 24 Port PoE 10/100/1000M with 4 Combo Gigabit SFP Open Slot Web Smart Switch

User Manual 24 Port PoE 10/100/1000M with 4 Combo Gigabit SFP Open Slot Web Smart Switch User Manual 24 Port PoE 10/100/1000M with 4 Combo Gigabit SFP Open Slot Web Smart Switch FCC Warning This Equipment has been tested and found to comply with the limits for a Class-A digital device, pursuant

More information

Cisco SLM2024 24-Port Gigabit Smart Switch Cisco Small Business Smart Switches

Cisco SLM2024 24-Port Gigabit Smart Switch Cisco Small Business Smart Switches Cisco SLM2024 24-Port Gigabit Smart Switch Cisco Small Business Smart Switches Cost-Effective, Secure Switching with Simplified Management for Your Small Business Highlights Easy-to-use web browser interface

More information

Cisco Small Business Managed Switches

Cisco Small Business Managed Switches Cisco SRW208MP 8-Port 10/100 Ethernet Switch: WebView/Max PoE Cisco Small Business Managed Switches Secure, Reliable, Intelligent Switch with PoE for Your Growing Small Business Highlights Connects up

More information

Cisco SLM248P 48-Port 10/100 + 2-Port Gigabit Smart Switch: SFPs/PoE

Cisco SLM248P 48-Port 10/100 + 2-Port Gigabit Smart Switch: SFPs/PoE Cisco SLM248P 48-Port 10/100 + 2-Port Gigabit Smart Switch: SFPs/PoE Cisco Small Business Smart Switches Cost-Effective, Secure Switching with Simplified Management and PoE for Your Growing Business Highlights

More information

AT-S63 Version 3.1.0 Management Software for the AT-9400 Basic Layer 3 Gigabit Ethernet Switches Software Release Notes

AT-S63 Version 3.1.0 Management Software for the AT-9400 Basic Layer 3 Gigabit Ethernet Switches Software Release Notes AT-S63 Version 3.1.0 Management Software for the AT-9400 Basic Layer 3 Gigabit Ethernet Switches Software Release Notes Please read this document before you begin to use the management software. Supported

More information

AT-S105 Version 1.2.0 Management Software Release Notes AT-FS750/24POE and AT-FS750/48 Fast Ethernet WebSmart Switches

AT-S105 Version 1.2.0 Management Software Release Notes AT-FS750/24POE and AT-FS750/48 Fast Ethernet WebSmart Switches AT-S105 Version 1.2.0 Management Software Release Notes AT-FS750/24POE and AT-FS750/48 Fast Ethernet WebSmart Switches Please read this document before you begin to use the management software. NOTE This

More information

TP-LINK. 24-Port Gigabit L2 Managed Switch with 4 SFP Slots. Overview. Datasheet TL-SG5428. www.tp-link.com

TP-LINK. 24-Port Gigabit L2 Managed Switch with 4 SFP Slots. Overview. Datasheet TL-SG5428. www.tp-link.com TP-LINK TM 24-Port Gigabit L2 Managed Switch with 4 SFP Slots Overview Designed for workgroups and departments, from TP-LINK provides full set of layer 2 management features. It delivers maximum throughput

More information

D-Link DES-1024D 24-Port 10/100Mbps Ethernet Switch. Manual

D-Link DES-1024D 24-Port 10/100Mbps Ethernet Switch. Manual D-Link DES-1024D 24-Port 10/100Mbps Ethernet Switch Manual TABLE OF CONTENTS About This Guide... 1 PURPOSE...1 TERMS/USAGE...1 OVERVIEW OF THIS USER S GUIDE...1 Introduction... 2 FAST ETHERNET TECHNOLOGY...2

More information

3.5 EXTERNAL NETWORK HDD. User s Manual

3.5 EXTERNAL NETWORK HDD. User s Manual 3.5 EXTERNAL NETWORK HDD User s Manual Table of Content Before You Use Key Features H/W Installation Illustration of Product LED Definition NETWORK HDD Assembly Setup the Network HDD Home Disk Utility

More information

8-port 10/100Base-TX +2-port 100Base-FX Switch. User s Guide

8-port 10/100Base-TX +2-port 100Base-FX Switch. User s Guide 8-port 10/100Base-TX +2-port 100Base-FX Switch User s Guide COPYRIGHT All rights reserved. No part of this publication may be reproduced, stored in a retrieval system, or transmitted in any form or by

More information

NS-205-IP67 5-Port Industrial 10/100 Mbps Ethernet Switch with IP67 Casing

NS-205-IP67 5-Port Industrial 10/100 Mbps Ethernet Switch with IP67 Casing NS-205-IP67 5-Port Industrial 10/100 Mbps Ethernet Switch with IP67 Casing Introduction: NS-205-IP67 Ethernet Switches are designed for use in industrial waterproof/harsh environments. The rugged packaging

More information

Loop-IP6702 TDMoEthernet

Loop-IP6702 TDMoEthernet Loop-IP6702 TDMoEthernet Description: Loop-IP-6702 device allows operator to transport 1 or 2 E1/T1* with timing and Ethernet traffic over IP network. This allows cost effective migration to IP network

More information

Carrier Ethernet: New Game Plan for Media Converters

Carrier Ethernet: New Game Plan for Media Converters Introduction IEEE Std. 802.3ah, also referred to as Ethernet in the First Mile (EFM) standard, has a well established name within the industry today. It lays out ground rules for implementing Ethernet

More information

TP-LINK. 24-Port Gigabit L2 Managed PoE Switch with 4 Combo SFP Slots. Overview. Datasheet TL-SG3424P. www.tp-link.com

TP-LINK. 24-Port Gigabit L2 Managed PoE Switch with 4 Combo SFP Slots. Overview. Datasheet TL-SG3424P. www.tp-link.com TP-LINK TM 24-Port Gigabit L2 Managed PoE Switch with 4 Combo SFP Slots Overview The provides 24 10/100/1000Mbps ports that supports 802.3at/af-compliant PoE, with a total PoE power supply up to 320W,

More information

1Industrial Ethernet Switch

1Industrial Ethernet Switch Ethernet Switch DIN-Rail Managed Ethernet Switch v2.0/ Dec, 2011 IES-3080/3062 Series Features 8-port managed Ethernet switch 1 Ethernet Switch Fastest Redundant Ethernet Ring: O-Ring (recovery time

More information

MICROSENS Media Converter 10/100/1000T to Gigabit Fiber

MICROSENS Media Converter 10/100/1000T to Gigabit Fiber MICROSENS Media Converter 10/100/1000T to Gigabit Fiber User Guide 10/100/100 TX to Gigabit Fiber Media Converter Page 2/7 Package Contents Please refer to the package content list below to verify them

More information

AT-S62 and AT-S62 NE Version 1.2.1 Management Software for AT-8500 Series Switches Software Release Notes

AT-S62 and AT-S62 NE Version 1.2.1 Management Software for AT-8500 Series Switches Software Release Notes Supported Platforms AT-S62 and AT-S62 NE Version 1.2.1 Software Release Notes AT-S62 and AT-S62 NE Version 1.2.1 Management Software for AT-8500 Series Switches Software Release Notes Please read this

More information

ADSL MODEM. User Manual V1.0

ADSL MODEM. User Manual V1.0 ADSL MODEM User Manual V1.0 CONTENTS 1.OVERVIEW... 3 1.1 ABOUT ADSL... 3 1.2 ABOUT ADSL2/2+... 3 1.3 FEATURES... 3 2 SPECIFICATION... 4 2.1 INTERFACE INTRODUCTION... 4 2.1.1 INDICATOR AND INTERFACE...

More information

Linksys WAP300N. User Guide

Linksys WAP300N. User Guide User Guide Contents Contents Overview Package contents 1 Back view 1 Bottom view 2 How to expand your home network 3 What is a network? 3 How to expand your home network 3 Where to find more help 3 Operating

More information

Easy Smart Configuration Utility

Easy Smart Configuration Utility Easy Smart Configuration Utility REV1.0.0 1910010939 CONTENTS Chapter 1 About this Guide...3 1.1 Intended Readers... 3 1.2 Conventions... 3 1.3 Overview of This Guide... 3 Chapter 2 Getting Started...6

More information

ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION

ENET-710. ENET-710 - Ethernet Module ENET-710 JAN / 06 FOUNDATION ENET-710 ENET-710 - Ethernet Module JAN / 06 ENET-710 FOUNDATION E N E T 7 1 0 ME smar www.smar.com Specifications and information are subject to change without notice. Up-to-date address information is

More information

Gigabit Ethernet Web Smart 8-Port Switch 2 Combo SFP Open Slot

Gigabit Ethernet Web Smart 8-Port Switch 2 Combo SFP Open Slot Gigabit Ethernet Web Smart 8-Port Switch 2 Combo SFP Open Slot User s Manual (DN-80201) Content Introduction ------------------------------------------------------------------------------------4 Product

More information