ESSEX COUNTY VOCATIONAL AND TECHNICAL SCHOOLS BOARD OF EDUCATION

Transcription

1 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 1 TABLE OF CONTENTS ESSEX COUNTY VOCATIONAL AND TECHNICAL SCHOOLS BOARD OF EDUCATION REV. EDWIN D. LEAHY - President ADRIANNE DAVIS- Vice President SALVATORE CARNOVALE ANTHONY MOLINARO CARMEN MORALES JAMES SOUDER MURPHY DURKIN Board Attorney MICHAEL A. PENNELLA, Ph.D. Superintendent VINCENT MCFADDEN. Assistant Superintendent for Business VITO A. DELLIBOVI Business Administrator/Board Secretary DIRECTOR JOSEPH M. TYSK Adult & Vocational Education Evening School Supervisor Andrew Turner Babafemi Ojo Richard McNanna APPRENTICESHIP COORDINATOR RAYMOND FLANNERY GENERAL INFORMATION...1 COURSE SCHEDULES...2 ADULT BASIC SKILLS PROGRAM...4 APPRENTICESHIP PROGRAMS...3 ON-SITE/CUSTOM TRAINING...3 FULL TIME PROGRAMS AUTOMOTIVE TECHNOLOGIES...5 BUILDING TRADE TECHNOLOGIES...5 BUSINESS TECHNOLOGIES...5 ELECTRICITY...6 PLUMBING...6 NETWORK CABLING CERTIFICATION & WIRING SPECIALIST...6,10 HEALTH OCCUPATIONS/NURSING/DENTAL...6 INTEGRATED SYSTEMS: Telecommunications, Voice & Messaging...7, 9 CERTIFICATION COURSES A+ CERTIFICATION...7 BOILER OPERATION/LICENSE...8 EPA CERTIFICATION FOR AIR CONDITIONNING & REFRIGERATION TECHNICANS...6,11 *CABLE, TV INSTALLATION & NETWORK CABLE TRAINING PROGRAM...7,10 CISCO NETWORK SPECIALIST...5,12 LICENSED PRACTICAL NURSING (LPN)...6,14 CERTIFIED NURSING ASSISTANT (CNA)...6,15 * Represents New Program The Essex County Vocational/Technical Schools Board of Education affirms its responsibility to ensure all Adults enrolled in the school district equal educational opportunity regardless of race, color, creed, religion, sex, ancestry, national origin, social or economic status or condition of handicap.

2 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 1 GENERAL INFORMATION ADMISSION REQUIREMENTS: There are no educational requirments for admission; however, all Full-Time Preparatory applicants will be counseled and tested prior to entry into the program in order to ensure successful completion. Courses listed in this bulletin are available to individuals 18 years of age and older who can profit from such training. Persons applying for admission will not be admitted while enrolled on a day High School program. CANCELLATION POLICY: If a course must be cancelled for any reason, tuition and registration fees will be reimbursed. In the event of insufficient enrollment, a course will be withdrawn and all fees will be credited/ refunded. No fees will be reimbursed after the first class for any reason. CERITIFICATES AND DIPLOMAS: Trade extension diplomas will specify hours of training in a trade area. Trade preparatory diplomas will be given for the successful achievement of the entry-level skill status of a trade area. DISMISSAL FOR UNSATISFACTORY CONDUCT: Misconduct of any type will not be tolerated. Adults will be terminated following a review of facts by the Director of Adult and Vocational Technical Education. Students will not be allowed to continue for a six-month period from the dismissal date. EDUCATIONAL REQIREMENTS: In several courses a series of units are provided in sequence. To enter one of these units, students must meet the prerequisite or prove to the satisfaction of the instructor that they have had equivalent training. In many courses, however, there are not such requirements. METHOD OF PAYMENT: Only money orders and checks will be accepted. If paying by check, two forms of ID, including one photo ID, will need to be provided at the time of payment. No cash will be accepted. Tuition will not be refunded for any reason after class begins unless the class is cancelled. All tuition, lab fees, and material fees must be paid in full in order to be admitted to class. SCHOOL CLOSING: Classes missed due to inclement weather shall be made up at the end of the term. Evening classes are automatically cancelled when day classes are cancelled. All closings are announced on WINS 1010, WOR 970 and WABC 770. TUITION: There is no tuition for Essex County Residents taking Trade Preparatory courses However, a $ material replacement fee is charged for all Vocational-Technical courses. Cost of books, if necessary, will be additional if not noted otherwise. SENIOR CITIZEN POLICY: Tuition cost shall be reduced Ten Dollars ($10.00) for senior citizens that reside in Essex County. For information about apprenticeship classes and cutomized in-plant apprenticeship programs contact: RAYMOND FLANNERY - Apprenticeship Coordinator 50 South Clinton Street, East Orange, NJ Phone: (973) Fax (973) CUSTOMIZED TRAINING PROGRAMS: Design programs to meet the specific needs of your employees or staff. Contact Mr. Joseph M. Tysk, Director of Vocational and Adult Education, 50 South Clinton Street, East Orange, NJ

3 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page ABE, ESL AND PART-TIME COURSES Evening School Schedule ABE/ESL FALL TERM Registration Dates: Sept. 8, 9, 10, 11, 15, 16, 17, 18 5:00-8:00 PM Class Schedules: 6:00 9:00 PM MON. & WED. 9/22/08 to 12/03/08 20 SESSIONS TUES. & THURS. 9/23/08 to 12/04/08 20 SESSIONS ABE/ESL WINTER TERM Registration Dates: Dec. 10, 11, 15, 16, 17, 18 5:00-8:00 PM Class Schedules: 6:00-9:00 PM MON. & WED. 1/05/09 to 3/18/09 20 SESSIONS TUES. & THURS. 1/06/09 to 3/12/09 20 SESSIONS ABE/ESL SPRING TERM Registration Dates: March 16, 17, 18, 19 5:00-8:00 PM Class Schedules: 6:00-9:00 PM MON. & WED. 3/25/09 to 6/08/09 20 SESSIONS TUES. & THURS. 3/26/09 to 6/02/09 20 SESSIONS FULL-TIME TRADE PREPARATORY COURSES Evening School Schedule FULL-TIME FALL TERM Registration Dates: Sept. 8, 9, 10, 11, 15, 16, 17, 18 5:00-8:00 PM Class Schedules: 5:00-9:00 PM 9/29/08 to 1/30/09 FULL-TIME WINTER TERM Registration Dates (for selected courses): Dec. 10, 11, 15, 16, 17, 18 5:00-7:30 PM Class Schedules: 5:00-9:00 PM 2/02/09 to 6/05/08 ADULT SCHOOL LOCATIONS TECHNICAL CAREERS CENTER EAST ORANGE CENTER (LPN & CNA ONLY) 91 WEST MARKET STREET 50 South Clinton Street NEWARK, NJ East Orange, NJ (973) (973) & :00 AM - 3:00 PM 5:00 PM - 9:00 PM only 2

4 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 3 APPRENTICESHIP TRAINING PROGRAMS APPRENTICESHIP SCHEDULE TUES. & THURS. 9/13/08 TO 4/06/09 50 SESSIONS Tuition Fee: $350.00, and includes books where applicable,, Company check or money order only. APPRENTICESHIP PROGRAMS: The apprenticeship training in New Jersey, which operates under the guidelines of the Vocational Division of the State Department of Education, is approved by Essex County Vocational Schools. Our training program is also approved by the Bureau of Veterans Training. It has been recognized for its effectiveness in preparing qualified apprentices in a wide variety of trades in the construction and industrial fields. The program consists of a minimum of 144 hours per year of instructional training at our vocational schools. The length of apprenticeship is determined by the standards of the trade selected. In most trades the length of apprenticeship is four years, after which the apprentice may expect journeyman status. Participants must be employed in the specific field of the trade to qualify for sponsorship. A/C Heating & Refrigeration Electricity Maintenance Mechanic Plumbing & Pipefitting Building Maintenance Repair Automotive Trades Welding Carpentry Stationary Engineering FOOD HANDLERS TRAINING PROGRAM. BY ARRANGEMENT: This program is designed to assist food service establishments in maintaining good health standards as prescribed by the New JerseyDepartment of Health. Upon successful completion of the program, a certificate will be awarded. Wed., 3 Hours - $10.00 Fee (1st Wednesday of each month) call Alex Caprio - (973) For Further Information Contact: RAYMOND FLANNERY Apprenticeship Coordinator Essex County Vocational/Technical Schools 50 South Clinton St., East Orange, NJ Phone: (973) Fax: (973)

5 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 4 FREE - FREE - FREE ADULT BASIC EDUCATION (TECHNICAL CAREERS CENTER ONLY) The Adult Basic Education program offers PRE-GED, ABE, and ESL courses. Upon registration, each student is evaluated to establish their educational deficiencies. After testing/evaluation an individual education plan is developed, and each student is placed into class with students of comparable skills. The educational plan is created to develop competency in communication and/or mathematical skills. The attainment of GED certificate is the program goal. Adult Basic Education (ABE, PRE-GED) This course prepares students for the High School Equivalency Program (GED). Emphasis is placed on providing skills in reading, spelling, basic mathematics and language arts. Mon. & Wed. 6:00-9:00 p.m. NO COST General Education Development (GED Preparation) This course is designed to prepare students for the New Jersey State High School Equivalency Examination. Concentrated instruction is provided in mathematics, grammar, reading and language arts. Mon. & Wed. 6:00-9:00 p.m. NO COST English as a Second Language (ESL) Conversational English for beginners and intermediate students. Emphasis is placed on improving students' oral and written communication skills, reading proficiency and knowledge of grammar. Tues. & Thurs. 6:00-9:00 p.m. NO COST All adult basic skills students will attend an orientation session that will include testing, counseling and skill level placement. The adult basic skills student will also be required to take a post-test and complete an exit conference with counselor prior to the conclusion of the program. For More Information, contact Mr. Babafemi Ojo/ Mr. Andrew Turner/ Mr. Richard McNanna (973) (Phone) 5:00 p.m. 8:00 p.m. (973) (Fax) 4

6 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 5 FULL TIME TRADE PREPARATORY PROGRAMS MATERIAL FEE IS: $ PER COURSE, UNLESS OTHERWISE NOTED* Tuition: Although there is no tuition for Essex County Residents, there is a $ per course material fee. (Unless otherwise noted) These full-time evening programs are designed to provide students with entry-level skills in a one-year period. The courses meet 3 evenings, 12 hours per week, 5:00 to 9:00 P.M. Requirements for registration are that students be at least 18 years of age, be out of school and an Essex County resident. Fall Term September 29, 2008 to January 30, 2009 Winter Term February 2, 2009 to June 5, 2009 AUTOMOTIVE TECHNOLOGY (Fall & Winter Registration) Emphasis is placed on providing the student with job entry-level skills. Areas covered include: tune-ups, brakes, exhaust systems and all areas of repair, replacement and diagnosis. Mon., Tues., Wed. 5:00-9:00 p.m. (Technical Careers Ctr.) AUTO & FENDER REPAIR (Fall & Winter Registration) This course will include instruction on minor and major collision repairs, including frame straightening theory, unit body and chassis considerations, welding, body work preparation, painting and auto restoration. Tues., Wed., Thurs. 5:00-9:00 p.m. (Technical Careers Ctr.) BUILDING TRADE TECHNOLOGIES (Fall & Winter Registration) Areas covered include: carpentry, plumbing, air conditioning and electricity. Emphasis is placed on providing the student with familiarly with all aspects of building construction. Job entry-level skills are emphasized. Tues., Wed., Thurs. 5: p.m. (Technical Careers Ctr.) BUSINESS TECHNOLOGIES (Introduction) (Fall & Winter Registration) * Material Fee $ This is an introductory computer application course. No experience with computers is assumed and Microsoft Office, Access, Excel, Power Point, Microsoft Outlook and their integration are stressed. Use of the Internet is also explored. Tues. Wed., Thurs. 5:00-9:00 p.m. (Technical Careers Ctr. ) BUSINESS TECHNOLOGIES (Intermediate) (Winter Registration Only) * Material Fee $ This is an advanced computer application course. The course assumes that the student is familiar with the fundamentals of Microsoft Office, Word, Excel, Access and Power Point. The object of this course is to extend the students knowledge of the Microsoft s application tools. Tues., Wed., Thurs. 5:00-9:00 p.m. (Technical Careers Ctr.) CARPENTRY (Fall & Winter Registration) Layout, Framing, Sheathing, Siding and Roofing, as may be applied to the construction trades. Blueprint Reading, use of measuring tools, hand tools and power tools are stressed. Mon., Wed., Fri. 5:00-9:00 p.m. (Technical Careers Ctr.) 5

7 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 6 FULL TIME TRADE PREPARATORY PROGRAMS (Continued) COMPUTER AIDED DRAFTING (CAD) (Fall & Winter Registration) This course uses the latest release of Auto CAD software to furnish the students with the skills necessary to function effectively in the design/drafting industry. Areas covered include: commands, creation of libraries, isometric and wire frame modeling, blocks and attributes. Mon., Wed., Fri. 5:00-9:00 p.m. (Technical Careers Ctr.) DENTAL ASSISTING (Fall registration Only) This course is designed to prepare students for employment within a dental office. Areas covered include: patient care, office practices, chair-side procedures, maintaining instruments, laboratory duties and radiological care and procedures. Mon., Tues., Wed. 5:00-9:00 p.m. (Technical Careers Ctr.) (See PG. 13 for cost and fees) BASIC ELECTRICITY (Fall Registration Only) This course is designed to provide students with job entry level skills. Areas to be covered include: direct and alternating current, DC generators and motors, single and 3 phase AC motors, light and power wiring and single phase transformers. Mon., Wed., Fri. 5:00 9:00p.m. (Technical Careers Ctr.) INTERMEDIATE/ADVANCED ELECTRICITY (Fall Registration Only) This course is offered for individuals with prior electrical experience. It covers commercial wiring, load calculations, motor theory, motor control, fire & burglar systems and high voltage terminations. Tues., Wed., Thurs., 5:00 pm 9:00 pm (Technical Careers Ctr.) HEATING, VENTILATION & AIR CONDITIONING (HVAC) (Fall Registration Only) This course emphasizes the principles of air conditioning, refrigeration and electricity. Proper tool usage, maintenance and troubleshooting needed for the trade are demonstrated. Commercial AC and Refrigeration as well as gas heating systems are discussed. E.P.A. Certification is available for successful candidates. Mon., Tues., Wed., 5:00-9:00 p.m. (Technical Careers Ctr.) (See Pg. 11 for costs and fees) PLUMBING (Fall Registration Only) This course places emphasis on providing the student with the necessary theory and hands-on applications needed for complete familiarity with all aspects of the plumbing field. Areas covered include: hand-tools, fittings, domestic water supply, drainage systems, fixtures and connections, pipes and fittings, cold/hot water supply, heating systems, vents, waste disposal and code book technology. Tues, Wed, Thurs., 5:00-9:00 p.m. (Technical Careers Ctr.) WELDING TECHNOLOGY This course covers techniques of welding: acetylene, electric arc, mig and tig welding, Blueprint reading is also integrated into the course to enable students to fabricate projects according to print specifications. Tues., Wed., Thurs. 5:00-9:00 p.m. (Technical Careers Ctr.) LICENSED PRACTICAL NURSING (LPN) * South Clinton St. Center This 12 month program prepares students for the NJ Board of Nursing exam. This course begins each September and meets Monday through Friday from 8:00 a.m. till 3:00 p.m. Mon., Tues., Wed., Thurs., Fri. 8:20 am - 3:00 pm (East Orange Ctr. Only) (See Pg. 14 for cost and fees) CERTIFIED NURSING ASSISTANT (CNA) * South Clinton St. Center A 90 hour CNA program which prepares the student for the NJ Department of Health Certification, the course will meet in the evenings Monday through Thursday from 5:30 p.m. till 9:30 p.m. Mon., Tues., Wed., Thurs. 5:30-9:30 p.m. (East Orange Ctr. Only) (See Pg. 15 for cost and fees) 6

8 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 7 FULL TIME TRADE PREPARATORY PROGRAMS (Continued) A+ CERTIFICATION (Fall Registration Only) This A+ course prepares our students for careers in the Computer Technical field. They will be prepared for careers such as Computer Technician (troubleshooting and repairing computers); Help Desk Support (helping people to solve their problems with the software and operating systems, such as creating an Icon on their desktop, installing software, helping them to create folders and files, etc.). In addition, the student will be prepared for installation of multiple computers, in excess of 200. An A+ Certified instructor will teach this course. Upon the completion of the course, the students should successfully pass the A+ exam (Comptia Testing Ctr.). Students will be responsible for all test registration fees, books and kits. Mon., Tues., Wed., 5:00 9:00 p.m. (Technical Careers Center) CISCO CERTIFIED NETWORK ASSOCIATE (CCNA) (Fall registration only) * This course prepares individuals for careers in network design and implementation. Hands-on class using state of the art hardware and software (routers, computers, switches, hubs etc.) Course will be taught by a Cisco certified instructor. CCNA certification upon successful completion of the course is available. A home computer with Internet access is highly recommended. Tues., Wed., Thurs. 5:00-9:00 p.m. (Technical Careers Center) (See Pg. 12 for fees) CABLE, TV INSTALLATION & NETWORK CABLE TRAINING PROGRAM (Vocational/Technical) (Fall & Winter registration) Comcast Cable & the Essex County Vocational Technical Schools have developed a collaborative training partnership which will provide a pathway to support and prepare those students looking to start a Career in the cable TV installation field. Training will focus on CATV customer-facing video installation and repair techniques being used by Comcast Cable. Mon., Wed., Fri. 5:00-9:00 p.m. (Technical Careers Ctr.) (See Pg. 10 for information) INTEGRATED SYSTEMS: Telecommunications, Voice & Messaging Systems (Fall registration only) This hands-on training program is designed to acquaint the student with the telecommunication industry as well as Key Telephone systems. Students will be taught to install, program, and maintain integrated telephone systems (see pg. 8 for info.). Mon., Wed., Fri., 5:00-9:00 p.m. (Technical Careers Ctr.) 7

9 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 8 BOILER OPERATION/LICENSING Fireman's Black Seal (Low Pressure): The fireman's course will prepare students for the New Jersey State Examination for the Fireman's License. (Test included: 45 hours, 15 sessions). Prerequisite: A minimum of three months boiler room experience with more than 100 horse power, employed full-time while under the supervision of a Licensed High Pressure Operator. Tues. and Wed. 6:00-9:00 p.m. (Technical Careers Center) $200.00, includes book (15 Sessions) Fireman's Black Seal (High Pressure): This course is designed for individuals interested in upgrading their valid New Jersey State Black Seal License. (Text included: 45 hours, 15 Sessions). Prerequisite: A minimum of three months boiler room experience with greater than 100 horse-power, employer full-time while under the supervision of a Licensed High Pressure Operators. Tues. and Wed. 6:00-9:00 p.m. (Technical Careers Center) $200.00, includes book (15 Sessions) Stationary Engineer (Blue Seal/Red Seal): These courses are designed for fireman who already have their Prerequisite license. Individuals interested in upgrading their valid New Jersey State Seal License. (Text included: 60 hours, 20 Sessions). Prerequisite: Boiler Room experience, employed full-time under the supervision of a Licensed Engineer. Book included where applicable. Blue Seal: 6 months, 3rd class engineer $ Red Seal: 1 year, 1st class engineer $ Mon. and Wed. 6:00-9:00 p.m. (Technical Careers Center) 8

10 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 9 INTEGRATED SYSTEMS: TELECOMMUNICATION, VOICE & MESSAGING Eighty-five percent of all businesses of the United States have a Key Telephone System. This includes Churches, Restaurants, Travel Agencies, Doctors Offices, Law Firms, etc. The demand for Telephone Technicians who can install the wire and equipment, program the key switch, maintain the key switch and train the customer on its features is continually growing. Industry has identified that 70% of all Telephone Technicians will be eligible for pension in the next 2 years. This will create jobs and your students will be able to take advantage of these opportunities. Opportunities will also be with the local electrical contractors who are building the Smart Homes which include security, video and Key Telephone Systems. Upon completion of the course, a C-Tech Voice Communication Professional certification will be offered. The course will consist of 15 modules. Telephone & Key System theory Key System Workstation The Digital Telephone Key Systems Key System Programming Centralized programming Key System set-up, maintenance & troubleshooting Voic overview Triangle method of programming Programming voic Create mailboxes Voice mail management Program first automated attendant Program second automated attendant Program out dial or out calling For additional information, call (973) after 5:00 pm 9

11 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 10 Cable TV Installation & Network Cable Training Program Comcast Cable has joined with the Essex County Vocational/Technical Schools to provide Employment training in the Cable TV industry s customer-facing video installation and repair field. Training emphasis will be placed upon preparing students for entry into the CATV field as a level 2 communication technician. Topics covered will include: Intro to Telecommunication Technology CATV Network overview CATV Product knowledge Pre wire and cable system overview Introduction to Networking Copper & Fiber Optics Cable layout Cable wiring systems Tool recognition Code overview F Connectors Disconnects For additional information, call (973) after 5:00 pm 10

12 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 11 EPA CERTITICATION FOR AIR CONDITIONING & REFRIGERATION TECHNICIANS Section 608 of the Federal Clean Air Act requires that all persons who maintain, service, repair, or dispose of appliances that contain regulated refrigerants, be certified in proper refrigerant handling techniques as of November 14, Failure to comply can cost the technician/company as much as $25,000 per day, per violation and there is a bounty of up to $10,000 for providing information and/or services concerning violations to the EPA. Technicians who violate Clean Air Act Provisions may be fined, lose their certification and be required to appear in Federal Court. There are four (4) categories of technician certification: TYPE I: Persons who maintain, service or repair small appliances must be certified as Type I Technicians. TYPE II: Persons who maintain service, repair or dispose of high or very high pressure appliances, except small appliances and motor vehicle air condition systems, must be certified as Type II Technicians TYPE III: Persons who maintain, service, repair, or dispose of low-pressure equipment, as well as small appliance, must be certified as Universal Technicians. Essex County Vocational/Technical School's Air Conditioning, heating and Refrigeration course has been designed to not only prepare students for entry level positions in the HVAC trade but to simultaneously prepare the students to complete and pass the EPA Certification Exam. (EPA Test Certification Fee $100.00) EPA Exam items covered in this course include: Equipment Requirements Recovery Techniques Refrigeration Theory Recovery Requirements Leak Repair Requirements Safety For additional information call (973) after 5:00 pm 11

13 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 12 CISCO CERTIFIED NETWORK ASSOCIATE (CCNA) The Internet is emerging as a revolutionary force in our lives, redefining the way we communicate, work, shop, and play. It is not only changing the type and amount of information available, but also the way ideas are delivered. The Cisco Networking Academy Program is a timely response to these challenges. It is a highly successful alliance between Cisco Systems, education, business, government, and community organizations around the world. The program has seen phenomenal growth since its launch in the fall of 1997 and now spans the entire United States and more than 40 countries. The program centers on teaching students to design, build, and maintain computer networks. But the significance goes well beyond the central lesson plan. Using Web technologies, the Cisco Networking Academy Program prepares students for the 21st century workplace and simultaneously serves as a valuable mode for successful e-learning. The Cisco Certificate Network Associate Program prepares students for careers in network design and implementation. Hands-on classes using state-of-the-art hardware and software (routers, switches, hubs etc.) are used by Cisco Certified Instructors (Admission is limited and highly competitive for qualified candidates). Instructor will evaluate candidate s credentials and determine admittance to the program. This course provides a direct route to industry-standard certification. It qualifies students to pursue the Cisco Certified Networking Associate (CCNA) and Computing Technology Industry Assoc. (Comp TIA) Certifications. CCNA is the first step in Cisco Career Certifications. Books will cost approximately $ Tues., Wed., Thurs. 5:00-9:00 P.M. Test Fees: Upon completion of the Cisco Program, students will be responsible for all test fees and registration fees. Estimated cost approximately $ For additional information Mr. James Kinder, at jkinder@essextech.org 12

14 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 13 HEALTH OCCUPATIONS DENTAL ASSISTANT PROGRAM (EVENING) This program meets three (3) days per week, four hours each session (total hours 12 per week), from September through June (10-months). It is designed to prepare students for entry level positions in the dental professions as an educationally qualified Dental Assistant. Dental practice procedures are emphasized (dental sciences, chairside assisting, office management, and dental lab procedures). The program has both clinical/lab and didactic components. Successful completion of the Dental Assistant Program will also qualify participants to take Part I ~ (ICE) of the Dental Assisting National Board~Certified Dental Assistant (DANB~CDA) exam. Additional opportunities exist for students to obtain further DANB certification levels. Please see notes below. Mon., Tues., Wed., 5:00p.m.-9:00p.m Tuition ~ $ (Technical Career Ctr.) Textbook (s) ~ $ (required text and related workbook) * To be eligible for admission to the Dental Assistant Program the candidate must successfully complete the following prerequisites: Take the TABE Battery Test to determine ranking in class (if necessary) Provide proof of Essex County Residency Provide evidence of H.S. diploma or GED Complete a successful interview Satisfy tuition and fees in full, prior to starting class Dental Radiology Program ~ (Summer Session) Mon,Tues,Wed, 8:30 AM ~12:30 PM A six week- 90 hour course designed to prepare students for the NJ Dental Radiological Technologist exam. The course consists of three components: lecture, lab, and clinical sessions. Students are required to identify a dentist employer for completion of the courses (30 hours) clinical requirement. Participants may also obtain DANB* credit for the Radiation Health and Safety Part II of the DANB~CDA credential) exam upon successful completion of course and subsequent state exam. Tuition : $ Textbook (s): $75.00 Related fees: NJ State DRT exam $ ** NJ State DRT license $75.00 ** *The Dental Assisting National Board (DANB) ~ is the nationally recognized credentialing agency for the profession of Dental Assistants. The DANB Certified Dental Assistant (CDA) credential is a nationally recognized certification awarded following successful completion of three area exams: Infection Control Exam (ICE)~ Part I Radiation Health and Safety (RHS)~Part II General Chairside Exam (GC)~ Part III *** **Fees to be paid at time of application for exam and license to the NJ DEP~BRH The DANB~ GC exam may only be taken following the completion of DANB requirements for clinical hours and a verification of such by the dentist employer. Typically, students who have successfully completed Parts I and II may complete Part III within 3~6 months of employment contingent upon the number of hours worked per week. For additional information visit: 13

15 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 14 HEALTH OCCUPATIONS (Adult Full Day Program) 8:20 am - 3:00 pm LICENSED PRACTICAL NURSE (LPN) PROGRAM 50 SOUTH CLINTON STREET, 5TH FLOOR EAST ORANGE, NEW JERSEY (973) ; (973) This 12-month Practical Nursing program prepares students for the New Jersey Board of Nursing LPN examinations. This one-year program begins each September and meets Monday through Friday from 8:20 a.m. till 3:00 p.m. Applications will be accepted from December through March on the first Monday, Tuesday, Wednesday and Thursday from 4:00 p.m. until 6:00 p.m. ONLY. LPN REGISTRATION PROCEDURES; To be eligible for admission to the LPN program, the candidate must bring to registration the following items (originals only; no copies): 1. Evidence of a U.S. High School Diploma or G.E.D. If your diploma is from a foreign country it must be evaluated. Please call Educated Choices, at (973) or (609) for information regarding an academic evaluation. 2. Proof of legal citizenship or legal alien status. Provide birth certificate, passport, naturalization papers, or a permanent resident card. 3. A $25.00 nonrefundable testing fee (money order only) for the admission exam is required at time of registration. Applicants must score 65 or higher on the admission test to be considered for the program. 4. Photograph of applicant. Provide photograph or one can be taken at the school for a $2.00 fee. Once the application process has been completed and the test fee paid, an entrance examination will be scheduled. Tests are scheduled at least 4-6 weeks after completion of test registration. Applicants must score 60% or higher to be considered for the program. The higher you score the better your chances of being accepted into the program. The entrance exam covers reading comprehension, critical thinking, language skills and mathematical ability. TUITION AND FEES: Essex County Resident...$4, Out of County Resident...$6, Fees for books, uniforms, activities, etc. for all students...$2, (An itemized list will be given once candidate is accepted into the program) PROGRAM ACCEPTANCE: Once a student has been accepted into the program, an orientation day will be scheduled. Students will be responsible for a current physical and health history. These forms are included with your orientation notification papers. Students are required to be vaccinated and/or screened for Rubella, Rubeola, Varicella, Mantoux or Chest X-Ray and Hepatitis B. Cost of these exams and related tests are the sole responsibility of the students. Students will also be responsible for their own transportation to the school as well as to the clinical areas. Attendance is mandatory and a satisfactory passing rate must be established to remain in the program. Additional information will be given at the time of orientation. Registration dates: Dec 1, 2, 3, 4. Jan 5, 6, 7, 8. Feb. 2, 3, 4, 5. Mar. 2, 3, 4, 5 4:00p.m. 6:00 p.m. ONLY 14

16 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:24 AM Page 15 HEALTH OCCUPATIONS CERTIFIED NURSING ASSISTANT (CNA) PROGRAM Adult Evening Program 50 SOUTH CLINTON STREET, 5TH FLOOR EAST ORANGE, NEW JERSEY (973) Information Line (973) or (973) This 90-hour State Certified Nursing Assistant program prepares the student for the New Jersey Department of Health and Senior Services skills and written examinations for certification. This evening course will be run at various times during the year and classes will be held Monday through Thursday from 5:30 p.m. till 9:30 p.m. Registration will be September 15, 16, December 8, 9 and March 9, 10 from 4:00 pm to 6:00 pm. CNA REGISTRATION PROCEDURES: In order to be eligible for admission to the CNA program the student must successfully complete the following: 1. TABE Battery Test. A $25.00 non-refundable fee (money order only) is required at the time of registration. Testing will be approximately 3 weeks before the start of the course. Applicant must score at the 8th grade level or higher to enter the program 2. Provide proof of citizenship or legal alien status. If you are a U.S. citizen you will need to provide your birth certificate, passport, naturalization papers, or a permanent resident card. TUITION AND FEES (Payable by money order or check at the beginning of the program): Tuition (includes book and testing fees) $ Certification Testing Fees (at start of 4th module) $ Refundable Smock Deposit $ Uniforms, double Mantoux testing, skills and Hepatitis B vaccinations are the responsibility of the students. PROGRAM ACCEPTANCE: Once a student has been accepted into the program a brief orientation will be held. Students will be responsible for a current physical exam with specific vaccinations or screenings. Students will also be responsible for their own transportation to the school as well as to the clinical areas. Attendance is mandatory and a satisfactory passing rate must be established to remain in the program. Additional information will be given at the time of orientation. If you have any questions, please feel free to call the above numbers. 15

17 1143_prog_EssexCtyBooklet_08_Guts_v3 7/8/08 9:25 AM Page 16 ECVTS 10-MONTH CALENDAR September December March October January April June November February May September 22 Night School Classes Begin 23 Night School Classes Begin October 1 Professional Day - Half Day 8 Back to school night 13 Columbus Day November 6 N.J.E.A. Convention 7 N.J.E.A. Convention 15 School Fair 27 Thanksgiving Holiday 28 Thanksgiving Holiday December 24 Winter Break 25 Winter Break 26 Winter Break 27 Winter Break 28 Winter Break 29 Winter Break 30 Winter Break 31 Winter Break January 1 Winter Break 2 Winter Break 19 Dr. Martin Luther King, Jr. Day February 12 Professional Day - Half Day 13 Lincoln s Birthday 16 Presidents Day March 15 Half Day In-Service April 10 Spring Break 11 Spring Break 12 Spring Break 13 Spring Break 14 Spring Break 15 Spring Break 16 Spring Break 17 Spring Break May 22 Memorial Day 25 Memorial Day June 3 Professional Day - Half Day 15 Last Day For Students 16