The information contained in this brochure was accurate at the time of publication (30 September 2011). For updates, please go to the Unisa website

Transcription

1

2 The information contained in this brochure was accurate at the time of publication (30 September 2011). For updates, please go to the Unisa website or to the Unisa mobi site

3 s for the College of Science, Engineering and Technology National Certificates National Certificate in Datametrics (02402) 4 National Diplomas National Diploma: Engineering: Civil (NDECI) 6 National Diploma: Engineering: Electrical Clinical Engineering (NDEEN CEN) 8 National Diploma: Engineering: Electrical Computer Systems (NDEEN COS) 10 National Diploma: Engineering: Electrical Electronics and Electronic Communication (NDEEN EEC) 12 National Diploma: Engineering: Electrical Mechatronics (NDEEN MEC) 14 National Diploma: Engineering: Electrical Power Engineering (NDEEN PEN) 16 National Diploma: Engineering: Electrical Process Instrumentation (NDEEN PIN) 18 National Diploma: Engineering: Industrial (NDEID) 20 National Diploma: Engineering: Mechanical (NDEMC) 22 National Diploma: Engineering: Chemical (NDENG) 24 National Diploma: Information Technology (NDINL) 26 National Diploma: Mining Engineering (NDMIN) 28 National Diploma: Mine Surveying (NDMSR) 30 National Diploma: Pulp and Paper Technology (NDPPT) 32 National Diploma: Surface Mining (NDSMI) 34 Diplomas Diploma in Information Technology (98806) 35 Bachelor Degrees Bachelor of Science General Degree (02089 GEN) 36 Bachelor of Science General Degree GEN 38 Bachelor of Science Information Technology and Computer Science: Computational Intelligence Stream (02089 ICI) 40 Bachelor of Science Information Technology and Computer Science: Computational Statistics (Programming) Stream (02089 ICP) 41 Bachelor of Science Information Technology and Computer Science: Computational Statistics (Information Systems) Stream (02089 ICS) 42 Bachelor of Science Information Technology and Computer Science: Decision Modelling and Computing Stream (02089 IDC) 43 Bachelor of Science Information Technology and Computer Science: Information and Decision Modelling Stream (02089 IDM) 44 Bachelor of Science Information Technology and Computer Science: Scientific Computing Stream (02089 ISC) 45 Bachelor of Science Information Technology and Computer Science: Software Engineering Stream (02089 ISE) 46 Bachelor of Science Information Technology and Computer Science: Information Systems and Geography (02089 ISG) 47 Bachelor of Science Information Technology and Computer Science: Information Technology Management Stream (02089 ITM) 48 Bachelor of Science in Computing (98906) 49 Bachelor of Science in Informatics (98907) 50 Bachelor of Science Mathematical and Statistical Science: Applied Mathematics Stream (02089 MAM) 51 Bachelor of Science Mathematical and Statistical Science: Environmental Statistics Stream (02089 MES) 52 Bachelor of Science Mathematical and Statistical Science: Financial Modelling Stream (02089 MFI) 53 Bachelor of Science Mathematical and Statistical Science: Mathematics Stream (02089 MMA) 54 Bachelor of Science Mathematical and Statistical Science: Mathematical: Modelling Stream (02089 MMM) 55 Bachelor of Science Mathematical and Statistical Science: Mathematical Statistics Stream (02089 MMS) 56 Bachelor of Science Mathematical and Statistical Science: Statistical Decision Science Stream (02089 MSD) 57 Bachelor of Science Mathematical and Statistical Science: Statistics for Management Stream (02089 MSM) 58 Bachelor of Science (Mathematics and Applied Mathematics Major) (98801 MAM) 59 Bachelor of Science (Mathematics and Information Systems Major) (98801 MIS) 60 Bachelor of Science (Applied Mathematics and Computer Science Major) (98801 AMC) 61 Bachelor of Science (Mathematics and Computer Science Major) (98801 MCS) 62 Bachelor of Science (Applied Mathematics and Physics Major) (98801 AMP) 63 Bachelor of Science (Mathematics and Physics Major) (98801 MAP) 64 Bachelor of Science (Statistics and Physics Major) (98801 STP) 65 Bachelor of Science (Applied Mathematics and Statistics Major) (98801 AMS) 66 Bachelor of Science (Mathematics and Statistics Major) (98801 MAS) 67 Bachelor of Science (Mathematics and Chemistry Major (98801 MAC) 68 Bachelor of Science (Chemistry and Applied Mathematics Major) (98801 CAM) 69 Bachelor of Science (Chemistry and Physics Major) (98801 CAP) 70 Bachelor of Science (Chemistry and Statistics Major) (98801 CAS) 71 Bachelor of Science (Chemistry and Computer Science Major) (98801 CCS) 72 Bachelor of Science (Chemistry and Information Systems Major) (98801 CIS) 73 Bachelor of Science Natural Sciences: Astronomy Stream (02089 NAS) 74 Bachelor of Science Natural Sciences: Chemistry and Physics Stream (02089 NCF) 75 Bachelor of Science Natural Sciences: Chemistry and Microbiology Stream (02089 NCK) 76 Bachelor of Science Natural Sciences: Chemistry and Mathematics Stream (02089 NCM) 77 Bachelor of Science Natural Sciences: Chemistry and Physiology Stream (02089 NCP) 78 Bachelor of Science Natural Sciences: Physics and Computer Science Stream (02089 NFC) 79 Bachelor of Science Natural Sciences: Physics Stream (02089 NFI) 80 Baccalaureus Technologiae Degrees Baccalaureus Technologiae: Engineering: Chemical (Environmental) (BTECE) 82 Baccalaureus Technologiae: Engineering: Civil Construction Management (BTECV COM) 83 Baccalaureus Technologiae: Engineering: Civil Environmental Engineering (BTECV ENV) 84 Baccalaureus Technologiae: Engineering: Civil Structural (BTECV STR) 85 Baccalaureus Technologiae: Engineering: Civil Urban Engineering (BTECV URB) 86 Baccalaureus Technologiae: Engineering: Civil Water (BTECV WAT) 87 Baccalaureus Technologiae: Engineering: Electrical Clinical Engineering (BTELN CEN) 88 Baccalaureus Technologiae: Engineering: Electrical Computer Systems (BTELN COS) 89 Baccalaureus Technologiae: Engineering: Electrical Power Engineering (BTELN PEN) 90

4 Baccalaureus Technologiae: Engineering: Electrical Process Instrumentation (BTELN PIN) 91 Baccalaureus Technologiae: Engineering: Electrical Telecommunication (BTELN TEL) 92 Baccalaureus Technologiae: Engineering: Chemical (BTENC) 93 Baccalaureus Technologiae: Engineering: Industrial (BTENI) 94 Baccalaureus Technologiae: Information Technology (BTINF) 95 Baccalaureus Technologiae: Engineering: Mechanical (BTMEE) 96 Honours Degrees Honours Bachelor of Commerce in Statistics (04103) 97 Honours Bachelor of Arts in Mathematics (04375) 98 Bachelor of Science Honours in Chemistry Education (98910) 99 Honours Bachelor of Science in Chemistry (04472) 99 Honours Bachelor of Science in Physics (04502) 100 Bachelor of Science Honours in Physics Education (98914) 100 Bachelor of Science Honours in Science Education (98915) 101 Bachelor of Science Honours in Life Science Education (98912) 103 Honours Bachelor of Science in Astronomy (04561) 104 Bachelor of Science Honours in Astronomy Education (98909) 105 Honours Bachelor of Science in Applied Mathematics (0457X) 106 Honours Bachelor of Science in Mathematics (04588) 107 Bachelor of Science Honours in Mathematics Education (98913) 108 Honours Bachelor of Science in Statistics (04596) 109 Bachelor of Science Honours in Statistics Education (98916) 110 Honours Bachelor of Science in Information Systems (04693) 111 Honours Bachelor of Science in Computer Science (04545) 112 Bachelor of Science Honours in Computing (98908) 113 Bachelor of Science Honours in Technology Education (98917) 113 Bachelor of Science Honours in Computing Education (98911) 114 Honours Bachelor of Commerce in Business Informatics (05282) 115 Bachelor of Commerce Honours in Business Informatics (98450) 116 Honours Bachelor of Science in Data Mining (05622) 116

5 National Certificate in Datametrics NQF Exit Level 5 Qualification code Total NQF Credits 120 Admission Requirements Repeaters only Until 2014 NSC (Degree) with Mathematics & English passed with a rating of 4 OR matriculation exemption with at least E(40%) for Higher Grade Mathematics & English or at least D(50%) for Standard Grade Mathematics and English First Level Pre/Co-requisites Second Level Pre/Co-requisites Third Level Pre/Co-requisites Choose at least 7 from the following Choose at least 3 from the following COS3701 Theoretical Pre: COS2601 Computer Science 3 COS1501 Theoretical Computer Science 1 COS2601 Theoretical Computer Science 2 Pre: COS1501 COS3711 Advanced Programming Pre: COS2611 & COS2614 COS1511 Introduction to Programming 1 COS1512 Introduction to Programming 2 COS1521 Computer Systems: Fundamental Concepts DSC1510 Introduction to the Business World DSC1630 Introductory Financial Mathematics EUP1501 End-User Computing INF1505 Introduction to Business Information Systems (Information Systems) INF1511 Visual Programming 1 INF1520 Human-Computer Interaction I MAT1503 Linear Algebra (Mathematics) MAT1510 Precalculus Mathematics A MAT1511 Precalculus Mathematics B MAT1512 Calculus A MAT1613 Calculus B (Mathematics) PHY1506 Electromagnetism and Heat (Physics) STA1501 Descriptive Statistics and Probability STA1502 Statistical Inference 1 STA1503 Distribution Theory I STA1510 Basic Statistics Co: EUP1501 Co: COS1511. STUDENTS are recommended to complete COS1511 before registering for COS1512 rating of 4 or MAT1510 or rating of 4 or MAT1510 or COS2611 Programming: Data Structures COS2614 Programming: Contemporary Concepts (Computer Science) COS2621 Computer Organisation COS2626 Computer Networks I COS2633 Numerical Methods I Pre: COS1512 Pre: COS1512 Pre: COS1512, COS1521 Pre: COS1511 or MAT1512 or MAT1503 COS3712 Computer Graphics (Computer Science) COS3721 Operating Systems and Architecture (Computer Science) COS3751 Techniques of Artificial Intelligence (Computer Science) COS3761 Formal Logic 3 (Computer Science) DSC3702 Optimisation of Resources Pre: COS2611 & MAT1503 Pre: COS2621 Pre: COS2611 & COS2661 Pre: COS2661 Pre: DSC2602 & DSC2601 or DSC2605, DSC2606 COS2661 Formal Logic 2 Pre: COS1501 DSC3703 Simulation Pre: DSC2602 & DSC2601 or DSC2605, DSC2606 DSC2601 Mathematical Programming DSC2602 Rational Decision Making Pre: DSC1510, DSC1630 & any two of MAT1512, MAT1613, MAT1503 Pre: DSC1510 & DSC1630 DSC3704 Models for Strategic Decision-Making DSC3705 Financial Risk Modelling DSC2604 Financial Modelling Pre: DSC1510 & DSC1630 DSC3706 Selected Topics for Operations Research ICT2621 Structured Systems Analysis and Design ICT2622 Object-Oriented Analysis INF2611 Visual Programming 2 DSC2607 Production Modelling Pre: INF1505 Pre: (INF1505 or COS1521) & (EUP1501 or COS1512 or INF1511) Pre: INF1511 Pre: DSC1510, DSC1630 & any two of MAT1512, MAT1613, MAT1503 INF3703 Principles of Databases (Information Systems) INF3705 Advanced Systems Development (Information Systems) INF3707 Database Design and Implementation (Information Stystems) INF3708 Software Project Management (Information Systems) Co: MAT1512 STA2601 Applied Statistics 2 Pre: STA1501 &STA1502 INF3720 Human-Computer Interaction 2 (Information Systems) rating of 5 & Physical Science with a rating of 4 or MAT1510 or STA2602 Statistical Inference 2 STA2603 Distribution Theory 2 Pre: STA1502; Co: STA1503 Pre: (STA1502 & DSC1620) or (STA1503 & MAT1512) Co: STA1501 STA2604 Forecasting 2 Pre: STA1501 & STA1502 Co: STA1501, STA1502 & (MAT1503 or DSC1620) Pre: DSC2602 & DSC2601 or DSC2605, DSC2606 Pre: DSC2602 & DSC2601 or DSC2605, DSC2606 Pre: DSC2602 & DSC2601 or DSC2605, DSC2606 Pre: COS2611 or ICT2622 Pre: ICT2621 & ICT2622 Pre: ICT2621 or ICT2621 Co: INF1520 Rules This qualification is being phased out. No new registrations will be allowed in Students who registered prior to 2011 have until 2014 to complete the certificate. 4

6 Curriculums 2012: CSET 5

7 National Diploma: Engineering: Civil NQF Exit Level 6 Qualification code NDECI Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English & Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Purpose statement to train a Civil Engineering Technician with sufficient academic knowledge and practical experience to plan, design, construct and manage projects in the Civil Engineering field. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites AMC1PRA - Applied Mechanics I Co: PHY1501 CMD101C - Construction Methods I DRW111X - Drawing I CMT101C - Construction Materials I Co: CMT1PRA (Theory)) ENN103F - English for Academic Purposes CMT1PRA - Construction Materials I Co: CMT101C EUC End-User Computing I (Theory) DRW221Y - Drawing II Pre: DRW111X EUP End-User Computing MAT Mathematics II (Engineering) Pre: MAT1581 MAT Mathematics I (Engineering) MCL191S - Management: Civil I PHY Elementary Mechanics Co: AMC1PRA SRC211Q - Surveying (Civil II) Pre: SRV121Q & SRV1PRA; Co: SRC2PRA SRV121Q - Surveying I (Theory) Co: SRV1PRA SRC2PRA - Surveying: Civil II Pre: SRV121Q & SRV1PRA; Co: SRC211Q SRV1PRA - Surveying I Co: SRV121Q TST271Z - Theory of Structures II (Theory) Pre: PHY1501 & AMC1PRA; Co: TST2PRA TST2PRA - Theory of Structures II Pre: PHY1501 & AMC1PRA; Co: TST271Z Rules Work integrated learning is a compulsory component towards the completion of this qualification. 6

8 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites GTE281Q - Geotechnical Engineering II (Theory) GTE2PRA - Geotechnical Engineering II Co: GTE2PRA DCM371Y - Documentation III (Theory) Co: DCM3PJT Co: GTE281Q DCM3PJT - Documentation III (Project) Co: DCM371Y MCL221S - Management: Civil II Pre: MCL191S GTE331Q - Geotechnical Engineering III (Theory) PEC201C - Engineering Practice: Civil II Pre: All subjects from first & second GTE3PRA - Geotechnical Engineering III RCD301C - Reinforced Concrete and Masonry Design III (Theory) RCD3PJT - Reinforced Concrete and Masonry Design III (Project) Pre: TST271Z & TST2PRA & SAN271Z; Co: RCD3PJT Pre: TST271Z & TST2PRA & SAN271Z; Co: RCD301C PEC301C - Engineering Practice: Civil III SAN341H - Structural Analysis III SAN271Z - Structural Analysis II Pre: TST271Z & TST2PRA SSD301C - Structural Steel and Timber Design III (Theory) TPE211C - Transportation Engineering II (Theory) TPE2PJT - Transportation Engineering II (Project) Co: TPE2PJT,SRC211Q & SRC2PRA Co: SRC211Q & SRC2PRA; Co: TPE211C SSD3PJT - Structural Steel and Timber Design III (Pjt TPE381V - Transportation Engineering III (Theory) Pre: GTE281Q & GTE2PRA; Co: GTE3PRA Pre: GTE281Q & GTE2PRA; Co: GTE331Q Pre: All subjects from first, second & third levels Pre: SAN271Z Pre: SAN271Z; Co: SSD3PJT Pre: SAN271Z; Co: SSD301C Pre: TPE211C & TPE2PJT; Co: TPE3PRA WEN221R - Water Engineering II (Theory) Pre: PHY1501 & AMC1PRA; Co: WEN2PRA TPE3PRA - Transportation Engineering III Co: TPE381V Pre: TPE211C & TPE2PJT WEN2PRA - Water Engineering II Pre: PHY1501 & AMC1PRA; Co: WEN221R WEN361F - Water Engineering III (Theory) Pre: WEN221R & WEN2PRA; Co: WEN3PRA & WEN3PJT WEN3PJT - Water Engineering III (Project) Pre: WEN221R & WEN2PRA; Co: WEN361F WEN3PRA - Water Engineering III Pre: WEN221R & WEN2PRA; Co: WEN361F Curriculums 2012: CSET 7

9 National Diploma: Engineering: Electrical NQF Exit Level 6 Clinical Engineering Qualification code NDEEN - CEN Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E (40%) for Higher Grade Mathematics, English & Physical Science or at least D (50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Repeaters only Until 2020 Purpose statement Students will be competent to apply technical knowledge, engineering principles and problem-solving techniques in the field of Electrical Engineering by operating within the relevant standards and codes in collaboration with other members of the engineering team. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites COS Introduction to Programming 1 Co: EUP1501 DIG221X - Digital Systems II (Theory) Pre: DIG111Z & DIG1PRA; Co: DIG2PRA DIG111Z - Digital Systems I (Theory) Co: DIG1PRA DIG2PRA - Digital Systems II Pre: DIG111Z & DIG1PRA; Co: DIG221X DIG1PRA - Digital Systems I ECT261Z - Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: ECT2PRA ECT151R - Electronics I (Theory) Co: ECT1PRA ECT2PRA - Electronics II Pre: ECT151R & ECT1PRA; Co: ECT261Z ECT1PRA - Electronics I Co: ECT151R ELE281X - Electrical Engineering II (Theory) Pre: ELE171U & ELE1PRA; Co: ELE2PRA ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA ELE2PRA - Electrical Engineering II Pre: ELE171U & ELE1PRA; Co: ELE281X ELE1PRA - Electrical Engineering I ENN103F - English for Academic Purposes Co: ELE171U EPR101E - Electrical Engineering Practice I Pre: All subjects from the first and second levels ICT Introduction to Interactive Co: ICT1513 Programming EUC End-User Computing I (Theory) ICT Introduction to Web Design Co: EUP1501 EUP End-User Computing MAT Mathematics II (Engineering) Pre: MAT1581 MAT Mathematics I (Engineering) 8

10 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites BSY Bio-Systems I DPJ391U - Design Project III Pre: All subjects from the first and second levels DIG331Q - Digital Systems III (Theory) Pre: DIG221X & DIG2PRA; Co: DIG3PRA Choose the following 2. DIG3PRA - Digital Systems III Pre: DIG221X & DIG2PRA; Co: DIG331Q BSM Business Management Ia ECT381A - Electronics III (Theory) Pre: ECT261Z & ECT2PRA; Co: ECT3PRA BSM Business Management 1b ECT3PRA - Electronics III Pre: ECT261Z & ECT2PRA; Co: ECT381A Or the following 2. EPR201E - Electrical Engineering Practice II Pre: All subjects from the first and second levels EMA2M1E - Engineering Management II (Module A) MAT Mathematics III (Engineering) Pre: MAT2691 EMA2M2E - Engineering Management II (Module B) MEQ Medical Equipment III (Module Co: MEQ3P1C A) (Theory) MEQ Medical Equipment III (Module Co: MEQ3P2D B) (Theory) MEQ3P1C - Medical Equipment III (Module A) MEQ3P2D - Medical Equipment III (Module B) Curriculums 2012: CSET 9

11 National Diploma: Engineering: Electrical NQF Exit Level 6 Computer Systems Qualification code NDEEN - COS Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Repeaters only Until 2020 Purpose statement Students will be competent to apply technical knowledge, engineering principles and problem-solving techniques in the field of Electrical Engineering by operating within the relevant standards and codes in collaboration with other members of the engineering team. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites COS Introduction to Programming 1 Co: EUP1501 DIG221X - Digital Systems II (Theory) Pre: DIG111Z & DIG1PRA; Co: DIG2PRA DIG111Z - Digital Systems I (Theory) Co: DIG1PRA DIG2PRA - Digital Systems II Pre: DIG111Z & DIG1PRA; Co: DIG221X DIG1PRA - Digital Systems I CO: DIG111Z ECT261Z - Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: ECT2PRA ECT151R - Electronics I (Theory) Co: ECT1PRA ECT2PRA - Electronics II Pre: ECT151R & ECT1PRA; Co: ECT261Z ECT1PRA - Electronics I Co: ECT151R ELE281X - Electrical Engineering II (Theory) Pre: ELE171U & ELE1PRA; Co: ELE2PRA ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA ELE2PRA - Electrical Engineering II Pre: ELE171U & ELE1PRA; Co: ELE281X ELE1PRA - Electrical Engineering I ENN103F - English for Academic Purposes Co: ELE171U EPR101E - Electrical Engineering Practice I Pre: All subjects from the first and second levels ICT Introduction to Interactive Co: ICT1513 Programming EUP End-User Computing ICT Introduction to Web Design Co: EUP1501 ICT Workstation Technical Skills ICT Network Technical Skills Co: ICT1531 MAT Mathematics I (Engineering) MAT Mathematics II (Engineering) Pre: MAT

12 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites DIG331Q - Digital Systems III (Theory) Pre: DIG221X & DIG2PRA; Co: DIG3PRA DPJ391U - Design Project III Pre: All subjects from the first and second levels & any 2 subjects on third level DIG3PRA - Digital Systems III Pre: DIG221X & DIG2PRA; Co: DIG331Q ICT Advanced Internet Programming Pre: ICT2612 & ICT2613 ECM291Z - Electronic Communication 2 (Theory) ECM2PRA - Electronic Communication 2 Co: ECM2PRA & ECT261Z & ECT2PRA ICT Advanced Operating System Practice Co: ECM291Z & ECT261Z & ECT291Z Choose the following 2. ECT381A - Electronics III (Theory) Pre: ECT261Z & ECT2PRA; Co: ECT3PRA BSM Business Management Ia ECT3PRA - Electronics III Pre: ECT261Z & ECT2PRA; Co: ECT381A BSM Business Management 1b EPR201E - Electrical Engineering Practice II Pre: All subjects from the first and second Or the following 2. levels ICT Business Informatics I EMA2M1E - Engineering Management II (Module A) ICT Interactive Programming Pre: COS1511, ICT1512 & ICT1513 EMA2M2E - Engineering Management II (Module B) ICT Internet Programming Pre: COS1511, ICT1512 & ICT1513 ICT Operating Systems Practice Pre: ICT1531 & ICT1532 ICT Advanced Graphical User Interface Programming MAT Mathematics III (Engineering) Pre: MAT2691 Pre: ICT2631 Curriculums 2012: CSET 11

13 National Diploma: Engineering: Electrical NQF Exit Level 6 Electronics and Electronic Communication Qualification code NDEEN - EEC Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Repeaters only Until 2020 Purpose statement Students will be competent to apply technical knowledge, engineering principles and problem-solving techniques in the field of Electrical Engineering by operating within the relevant standards and codes in collaboration with other members of the engineering team. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites COS Introduction to Programming 1 Co: EUP1501 DIG221X - Digital Systems II (Theory) Pre: DIG111Z & DIG1PRA; Co: DIG2PRA DIG111Z - Digital Systems I (Theory) Co: DIG1PRA DIG2PRA - Digital Systems II Pre: DIG111Z & DIG1PRA; Co: DIG221X DIG1PRA - Digital Systems I ECT261Z - Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: ECT2PRA ECT151R - Electronics I (Theory) Co: ECT1PRA ECT2PRA - Electronics II Pre: ECT151R & ECT1PRA; Co: ECT261Z ECT1PRA - Electronics I Co: ECT151R ELE281X - Electrical Engineering II (Theory) Pre: ELE171U & ELE1PRA; Co: ELE2PRA ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA ELE2PRA - Electrical Engineering II Pre: ELE171U & ELE1PRA; Co: ELE281X ELE1PRA - Electrical Engineering I ENN103F - English for Academic Purposes Co: ELE171U EPR101E - Electrical Engineering Practice I Pre: All subjects from the first and second levels ICT Introduction to Interactive Co: ICT1513 Programming EUC End-User Computing I (Theory) ICT Introduction to Web Design Co: EUP1501 EUP End-User Computing MAT Mathematics II (Engineering) Pre: MAT1581 MAT Mathematics I (Engineering) 12

14 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites DIG331Q - Digital Systems III (Theory) Pre: DIG221X & DIG2PRA; Co: DIG3PRA CSY391B - Control Systems III (Theory) Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY3PRA DIG3PRA - Digital Systems III Pre: DIG221X & DIG2PRA; Co: DIG331Q CSY3PRA - Control Systems III Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY391B ECM291Z - Electronic Communication 2 (Theory) ECM2PRA - Electronic Communication 2 Co: ECM2PRA & ECT261Z & ECT2PRA DPJ391U - Design Project III Pre: All subjects from the first and second levels & any 2 subjects on third level Co: ECM2PRA & ECT261Z & ECT291Z ICT Interactive Programming Pre: COS1511, ICT1512 & ICT1513 ECT381A - Electronics III (Theory) Pre: ECT261Z & ECT2PRA; Co: ECT3PRA ICT Internet Programming Pre: COS1511, ICT1512 & ICT1513 ECT3PRA - Electronics III Pre: ECT261Z & ECT2PRA; Co: ECT381A MCE341Z - Microwave Communication III (Theory) EKM341X - Electronic Measurements 3 (Theory) EKM3PRA - Electronic Measurements III EPR201E - Electrical Engineering Practice II Pre: ECT261Z & ECT2PRA; Co: MTR341R & MTR3PRA & EKM3PRA Pre: ECT261Z & ECT2PRA; Co: MTR341R & MTR3PRA & EKM341X Pre: All subjects from the first and second levels MCE3PRA - Microwave Communication III RAE341X - Radio Engineering III (Theory) RAE3PRA - Radio Engineering III MAT Mathematics III (Engineering) Pre: MAT2691 Choose the following 2. MTR341X - Metrology III (Theory) Pre: ECT261Z & ECT2PRA; Co: MTR3PRA BSM Business Management Ia & EKM341X & EKM3PRA MTR3PRA - Metrology III Pre: ECT261Z & ECT2PRA; Co: MTR341X & EKM341X & EKM3PRA BSM Business Management 1b OR the following 2. EMA2M1E - Engineering Management II (Module A) EMA2M2E - Engineering Management II (Module B) Pre: ECM291Z & ECM2PRA; Co: MCE3PRA Pre: ECM291Z & ECM2PRA; Co: MCE341Z Pre: ECM291Z & ECM2PRA; Co: RAE3PRA Curriculums 2012: CSET 13

15 National Diploma: Engineering: Electrical NQF Exit Level 6 Mechatronics Qualification code NDEEN - MEC Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Repeaters only Until 2020 Purpose statement Students will be competent to apply technical knowledge, engineering principles and problem-solving techniques in the field of Electrical Engineering by operating within the relevant standards and codes in collaboration with other members of the engineering team. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites ECT151R - Electronics I (Theory) Co: ECT1PRA COS Introduction to Programming 1 Pre: EUP1501 ECT1PRA - Electronics I Co: ECT151R DIG111Z - Digital Systems I (Theory) Co: DIG1PRA ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA DIG1PRA - Digital Systems I ELE1PRA - Electrical Engineering I Co: ELE171U ECT261Z - Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: ECT2PRA ENN103F - English for Academic Purposes ECT2PRA - Electronics II Pre: ECT151R & ECT1PRA; Co: ECT261Z EUC End-User Computing I (Theory) ELE281X - Electrical Engineering II (Theory) Pre: ELE171U & ELE1PRA; Co: ELE2PRA EUP End-User Computing ELE2PRA - Electrical Engineering II Pre: ELE171U & ELE1PRA; Co: ELE281X MAT Mathematics I (Engineering) EPR101E - Electrical Engineering Practice I Pre: All subjects from the first and second levels MCA1PRA - Mechanics I Co: PHY1501 MAT Mathematics II (Engineering) Pre: MAT1581 MED161Q - Mechanical Engineering MOM251Z - Mechanics of Machines II Pre: PHY1501 & AMC1PRA; Co: MOM2PRA Drawing I (Theory) PHY Elementary Mechanics MOM2PRA - Mechanics of Machines II Pre: PHY1501 & AMC1PRA; Co: MOM251Z SOM251R - Strength of Materials II (Theory) Pre: PHY1501 & AMC1PRA; Co: SOM2PRA SOM2PRA - Strength of Materials II Pre: PHY1501 & AMC1PRA; Co: SOM251R 14

16 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites CSY391B - Control Systems III (Theory) CSY3PRA - Control Systems III Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY3PRA Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY391B DIG331Q - Digital Systems III (Theory) DIG3PRA - Digital Systems III Pre: DIG221X & DIG2PRA; Co: DIG3PRA Pre: DIG221X & DIG2PRA; Co: DIG331Q DIG221X - Digital Systems II (Theory) Pre: DIG111Z & DIG1PRA; Co: DIG2PRA DPJ391U - Design Project III Pre: All subjects from the first and second levels DIG2PRA - Digital Systems II Pre: DIG111Z & DIG1PRA; Co: DIG221X EMM261R - Electrical Machines II (Theory) Co: EMM2PRA EPR201E - Electrical Engineering Practice II Pre: All subjects from the first and second levels EMM2PRA - Electrical Machines II Co: EMM261R FMC201U - Fluid Mechanics 2 (Theory) Pre: PHY1501 & AMC1PRA; Co: FMC2PRA PCE361U - Power Electronics III (Theory) Pre: ELE281X & ELE2PRA & EMM261R & EMM2PRA; Co: PCE3PRA FMC2PRA - Fluid Mechanics II Pre: PHY1501 & AMC1PRA; Co: FMC201U PCE3PRA - Power Electronics III Pre: ELE281X & ELE2PRA & EMM261R & EMM2PRA; Co: PCE361U INE211E - Industrial Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: INE2PRA INE2PRA - Industrial Electronics II Pre: ECT151R & ECT1PRA; Co: INE211E MAT Mathematics III (Engineering) Pre: MAT2691 MOM371A - Mechanics of Machines III (Theory) MOM3PRA - Mechanics of Machines III Pre: MOM251Z & MOM2PRA; Co: MOM3PRA Pre: MOM251Z & MOM2PRA; Co: MOM371A Curriculums 2012: CSET 15

17 National Diploma: Engineering: Electrical NQF Exit Level 6 Power Engineering Qualification code NDEEN - PEN Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Purpose statement Students will be competent to apply technical knowledge, engineering principles and problem-solving techniques in the field of Electrical Engineering by operating within the relevant standards and codes in collaboration with other members of the engineering team. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites COS Introduction to Programming 1 Co: EUP1501 DIG221X - Digital Systems II (Theory) Pre: DIG111Z & DIG1PRA; Co: DIG2PRA DIG111Z - Digital Systems I (Theory) Co: DIG1PRA DIG2PRA - Digital Systems II Pre: DIG111Z & DIG1PRA; Co: DIG221X DIG1PRA - Digital Systems I ECT261Z - Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: ECT2PRA ECT151R - Electronics I (Theory) Co: ECT1PRA ECT2PRA - Electronics II Pre: ECT151R & ECT1PRA; Co: ECT261Z ECT1PRA - Electronics I Co: ECT151R ELE281X - Electrical Engineering II (Theory) Pre: ELE171U & ELE1PRA; Co: ELE2PRA ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA ELE2PRA - Electrical Engineering II Pre: ELE171U & ELE1PRA; Co: ELE281X ELE1PRA - Electrical Engineering I ENN103F - English for Academic Purposes Co: ELE171U EPR101E - Electrical Engineering Practice I Pre: All subjects from the first and second levels ICT Introduction to Interactive Co: ICT1513 Programming EUC End-User Computing I (Theory) ICT Introduction to Web Design Co: EUP1501 EUP End-User Computing MAT Mathematics II (Engineering) Pre: MAT1581 MAT Mathematics I (Engineering) 16

18 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites CSY391B - Control Systems III (Theory) CSY3PRA - Control Systems III Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY3PRA Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY391B DPJ391U - Design Project III EKM341X - Electronic Measurements 3 (Theory) DIG331Q - Digital Systems III (Theory) Pre: DIG221X & DIG2PRA; Co: DIG3PRA EKM3PRA - Electronic Measurements III Pre: All subjects from the first and second levels Pre: ECT261Z & ECT2PRA; Co: MTR341R & MTR3PRA & EKM3PRA Pre: ECT261Z & ECT2PRA; Co: MTR341R & MTR3PRA & EKM341X DIG3PRA - Digital Systems III Pre: DIG221X & DIG2PRA; Co: DIG331Q ELM381Z - Electrical Protection 3 (Theory) Pre: ELE281X & ELE2PRA; Co: ELM3PRA ELD371R - Electrical Distribution 3 (Theory) Pre: ELE281X & ELE2PRA; Co: ELD3PRA ELM3PRA - Electrical Protection III Pre: ELE281X & ELE2PRA; Co: ELM381Z ELD3PRA - Electrical Distribution III ELE391X - Electrical Engineering III (Theory) ELE3PRA - Electrical Engineering III Pre: ELE281X & ELE2PRA; Co: ELD371R EMM371R - Electrical Machines III (Theory) Pre: ELE281X & ELE2PRA & EMM261R & EMM2PRAC; Co: EMM3PRA Pre: ELE281X & ELE2PRA; Co: ELE3PRA EMM3PRA - Electrical Machines III Pre: ELE281X & ELE2PRA & EMM261R & EMM2PRAC; Co: EMM371R Pre: ELE281X & ELE2PRA; Co: ELE391X MTR341X - Metrology III (Theory) Pre: ECT261Z & ECT2PRA; Co: MTR3PRA & EKM341X & EKM3PRA EMM261R - Electrical Machines II (Theory) Co: EMM2PRA MTR3PRA - Metrology III Pre: ECT261Z & ECT2PRA; Co: MTR341X & EKM341X & EKM3PRA EMM2PRA - Electrical Machines II EPR201E - Electrical Engineering Practice II Co: EMM261R PCE361U - Power Electronics III (Theory) Pre: ELE281X & ELE2PRA & EMM261R & EMM2PRA; Co: PCE3PRA Pre: All subjects from the first and second levels PCE3PRA - Power Electronics III INE211E - Industrial Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: INE2PRA Choose the following 2. INE2PRA - Industrial Electronics II Pre: ECT151R & ECT1PRA; Co: INE211E BSM Business Management Ia MAT Mathematics III (Engineering) Pre: MAT2691 BSM Business Management 1b OR the following 2. EMA2M1E - Engineering Management II (Module A) EMA2M2E - Engineering Management II (Module B) Pre: ELE281X & ELE2PRA & EMM261R & EMM2PRA; Co: PCE361U Curriculums 2012: CSET 17

19 National Diploma: Engineering: Electrical NQF Exit Level 6 Process Instrumentation Qualification code NDEEN - PIN Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Repeaters only Until 2020 Purpose statement Students will be competent to apply technical knowledge, engineering principles and problem-solving techniques in the field of Electrical Engineering by operating within the relevant standards and codes in collaboration with other members of the engineering team. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites COS Introduction to Programming 1 Co: EUP1501 DIG221X - Digital Systems II (Theory) Pre: DIG111Z & DIG1PRA; Co: DIG2PRA DIG111Z - Digital Systems I (Theory) Co: DIG1PRA DIG2PRA - Digital Systems II Pre: DIG111Z & DIG1PRA; Co: DIG221X DIG1PRA - Digital Systems I ECT261Z - Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: ECT2PRA ECT151R - Electronics I (Theory) Co: ECT1PRA ECT2PRA - Electronics II Pre: ECT151R & ECT1PRA; Co: ECT261Z ECT1PRA - Electronics I Co: ECT151R ELE281X - Electrical Engineering II (Theory) Pre: ELE171U & ELE1PRA; Co: ELE2PRA ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA ELE2PRA - Electrical Engineering II Pre: ELE171U & ELE1PRA; Co: ELE281X ELE1PRA - Electrical Engineering I Co: ELE171U EPR101E - Electrical Engineering Practice I Pre: All subjects from the first and second levels ENN103F - English for Academic Purposes MAT Mathematics II (Engineering) Pre: MAT1581 EUC End-User Computing I (Theory) PRS131P - Process Instrumentation I Co: PRS1PRA (Theory) EUP End-User Computing PRS1PRA - Process Instrumentation I Co: PRS131P MAT Mathematics I (Engineering) 18

20 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites CSY391B - Control Systems III (Theory) CSY3PRA - Control Systems III Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY3PRA Pre: ECT261Z & ECT2PRA & ELE281X & ELE2PRA & MAT3700; Co: CSY391B DPJ391U - Design Project III EKM341X - Electronic Measurements 3 (Theory) DIG331Q - Digital Systems III (Theory) Pre: DIG221X & DIG2PRA; Co: DIG3PRA EKM3PRA - Electronic Measurements III Pre: All subjects from the first and second levels & any 2 on third level Pre: ECT261Z & ECT2PRA; Co: MTR341R & MTR3PRA & EKM3PRA Pre: ECT261Z & ECT2PRA; Co: MTR341R & MTR3PRA & EKM341X DIG3PRA - Digital Systems III Pre: DIG221X & DIG2PRA; Co: DIG331Q MTR341X - Metrology III (Theory) Pre: ECT261Z & ECT2PRA; Co: MTR3PRA & EKM341X & EKM3PRA EPR201E - Electrical Engineering Practice II ICT Introduction to Interactive Programming Pre: All subjects from the first and second levels Co: ICT1513 MTR3PRA - Metrology III PRS341Z - Process Instrumentation III (Theory) ICT Introduction to Web Design Co: EUP1501 PRS3PRA - Process Instrumentation III INE211E - Industrial Electronics II (Theory) Pre: ECT151R & ECT1PRA; Co: INE2PRA Choose the following 2. INE2PRA - Industrial Electronics II Pre: ECT151R & ECT1PRA; Co: INE211E BSM Business Management Ia MAT Mathematics III (Engineering) Pre: MAT2691 BSM Business Management 1b PRS241S - Process Instrumentation II Pre: PRS131P & PRS1PRA; Co: PRS2PRA OR the following 2. (Theory) PRS2PRA - Process Instrumentation II Pre: PRS131P & PRS1PRA; Co: PRS241S EMA2M1E - Engineering Management II (Module A) EMA2M2E - Engineering Management II (Module B) Pre: ECT261Z & ECT2PRA; Co: MTR341X & EKM341X & EKM3PRA Pre: PRS241S & PRS2PRA; Co: PRS3PRA Pre: PRS241S & PRS2PRA; Co: PRS341Z Curriculums 2012: CSET 19

21 National Diploma: Engineering: Industrial NQF Exit Level 6 Qualification code NDEID Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Purpose statement the Industrial Engineering technician is involved in the investigation, improvement, design and implementation of integrated systems, comprising the optimisation of capital, plant, manpower and raw materials. the principles and techniques of engineering, industrial economics and management are utilised to design the systems to obtain the desired physical and economical results. First Level Pre/Co-requisites Second Level Pre/Co-requisites ENN103F - English for Academic Purposes ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA EUC End-User Computing I (Theory) ELE1PRA - Electrical Engineering I Co: ELE171U EUP End-User Computing EWS121Q - Engineering Work Study 1 MAT Mathematics I (Engineering) MME251U - Mechanical Manufacturing Engineering II Pre: MME141X; Co: MME1PRA MCA1PRA - Mechanics I Co: PHY1501 MME2PRA - Mechanical Manufacturing Engineering II MED161Q - Mechanical Engineering Drawing I MME141X - Mechanical Manufacturing Engineering I MME1PRA - Mechanical Manufacturing Engineering I PHY Elementary Mechanics PEI191V - Production Engineering: Industrial I QUT151Z - Qualitative Techniques I Pre: MME141X; Co: MME1PRA & MME251U Co: MME141X SOM251R - Strength of Materials II (Theory) Pre: PHY1501 & AMC1PRA; Co: SOM2PRA SOM2PRA - Strength of Materials II Pre: PHY1501 & AMC1PRA; Co: SOM251R 20

22 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites CTA2M2A - Cost Accounting II: Module 2 Pre: MAT1581 ATO331Q - Automation III Pre: MME251U EWS271L - Engineering Work Study 2 Pre: EWS121Q EWS381G - Engineering Work Study 3 Pre: EWS271L & FLM271S & CTA101A & CTA2M2A FLM271S - Facility Layout and Materials Handling MAC Introduction to Management Accounting PEI281S - Production Engineering: Industrial II PLA111A - Personnel Management (Agriculture I) FMA401V - Financial Management IV Pre: CTA101A & CTA2M2A Pre: MAT1581 IDP101E - Industrial Engineering Practice I Pre: All subjects from the first and second levels Pre: PEI191V IDP201E - Industrial Engineering Practice II Pre: All subjects from the first and second levels Pre: ENN103F MGP437U - Management Practice IV QAS221U - Quality Assurance II Pre: QUT151Z MME381B - Mechanical Manufacturing Engineering III OPR371S - Operational Research III Pre: MME251U Pre: PEI281S & QUT151Z Curriculums 2012: CSET 21

23 National Diploma: Engineering: Mechanical NQF Exit Level 6 Qualification code NDEMC Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Engineering Science passed with at least 50%. Purpose statement Persons achieving this qualification should be able to independently integrate mechanical engineering principles an specialist knowledge, apply these to determine appropriate ways of approaching activities and establish and use criteria to judge processes and outcomes. This qualification is intended for engineering practitioners in the industry. First Level Pre/Co-requisites Second Level Pre/Co-requisites Group A. Compulsory Group A. Compulsory BSM Business Management Ia ELE281X - Electrical Engineering II (Theory) Pre: ELE171U; Co: ELE1PRA ELE171U - Electrical Engineering I (Theory) Co: ELE1PRA ELE2PRA - Electrical Engineering II Pre: ELE171U; Co: ELE1PRA ELE1PRA - Electrical Engineering I Co: ELE171U FMC201U - Fluid Mechanics 2 (Theory) Pre: PHY1501; Co: MCA1PRA ENN103F - English for Academic Purposes FMC2PRA - Fluid Mechanics II Pre: PHY1501; Co: MCA1PRA EUC End-User Computing I (Theory) MAT Mathematics II (Engineering) Pre: MAT1581 EUP End-User Computing MEE231V - Mechanical Engineering Design Pre: MED161Q II MAT Mathematics I (Engineering) MEG101T - Maintenance Engineering I Pre: MAT1581 MCA1PRA - Mechanics I Co: PHY1501 MOM251Z - Mechanics of Machines II Pre: PHY1501: Co: MCA1PRA (Theory) MED161Q - Mechanical Engineering MOM2PRA - Mechanics of Machines II Pre: PHY1501: Co: MCA1PRA Drawing I MME141X - Mechanical Manufacturing Engineering I SOM251R - Strength of Materials II (Theory) Pre: PHY1501; Co: MCA1PRA MME1PRA - Mechanical Manufacturing Engineering I Co: MME141X SOM2PRA - Strength of Materials II Pre: PHY1501: Co: MCA1PRA PHY Elementary Mechanics THD291Z - Thermodynamics II (Theory) Pre: PHY1501; Co: MCA1PRA THD2PRA - Thermodynamics II Pre: PHY1501; Co: MCA1PRA Rules NOTE 1: Students must have access to a computer, printer and the necessary software for 2 hours per week. Also see requirements for IT related study units. for Computer Aided Drafting I (CAD161S) students must have access to the following: Pentium 486DX (or higher) with at least 16 MB RAM, connected to printer MS Windows operating system, with AutoCAD program (Version 13 or Student Version 13) NOTE 2: Students that have successfully completed MCP101E may apply to be exempted from MME1PRA and MME2PRA. to align the new Diploma to the Higher Education Qualifications Framework (HEQF) and the Engineering Council of South Africa (ECSA) documents, the curricula for Mechanical Engineering has been restructured as indicated above. 22

24 Third Level Pre/Co-requisites Fourth Level Pre/Co-requisites Group A. Compulsory Group A. Compulsory CAD161S - Computer Aided Draughting I Co: MED161Q MCP201E - Mechanical Engineering Practice II MCP101E - Mechanical Engineering Practice I MEA351A - Mechanical Engineering Design III MME251U - Mechanical Manufacturing Engineering II MME2PRA - Mechanical Manufacturing Engineering II Choose any 2 from the following combinations: Group B Pre: All subjects from the first and second levels Pre: MEE231V FMA331B - Hydraulic Machines 3 (Theory) Pre: FMA301A; Co: FMA3PRB Pre: MME141X; Co: MME1PRA Pre: MME141X; Co: MME1PRA FMA3PRB - Hydraulic Machines III OR. Group C Pre: FMA301A Choose any 3 from the following combinations: Group B MOM381B - Theory of Machines III (Theory) Pre: MOM371A; Co: MOM3PRB FMA301A - Fluid Mechanics 3 (Theory) Pre: FMC201U; Co: FMC2PRA MOM3PRB - Theory of Machines III Pre: MOM371A FMA3PRA - Fluid Mechanics III Pre: FMC201U; Co: FMC2PRA OR. Group D OR. Group C SOM381B - Applied Strength of Materials Pre: SOM381A; Co: SOM3PRB III (Theory) MOM371A - Mechanics of Machines III Pre: MOM251Z; Co: MOM2PRA SOM3PRB - Applied Strength of Materials Pre: SOM381A (Theory) III MOM3PRA - Mechanics of Machines III Pre: MOM251Z; Co: MOM2PRA OR. Group E OR. Group D THD321B - Steam Plant III (Theory) Pre: THD311A; Co: THD3PRB SOM381A - Strength of Materials III Pre: SOM251R; Co: SOM2PRA THD3PRB - Steam Plant III Pre: THD311A (Theory) SOM3PRA - Strength of Materials III Pre: SOM251R; Co: SOM2PRA Choose any 1 from the following: Note: Theory and practical modules count as 1 subject. OR. Group E ELE391X - Electrical Engineering III Pre: ELE281X; Co: ELE2PRA (Theory) THD311A - Thermodynamics III (Theory) Pre: THD291Z; Co: THD2PRA ELE3PRA - Electrical Engineering III Pre: ELE281X; Co: ELE2PRA THD3PRA - Thermodynamics III Pre: THD291Z; Co: THD2PRA MAT Mathematics III (Engineering) Pre: MAT2691 MEG291X - Maintenance Engineering II Pre: MEG101T Curriculums 2012: CSET 23

25 National Diploma: Engineering: Chemical NQF Exit Level 6 Qualification code NDENG Total NQF Credits 360 Admission Requirements NSC (Diploma) with Mathematics, English, Physical Science & (Engineering and Technology or a Computer subject) passed with a rating of 4 OR Senior Certificate with at least E(40%) for Higher Grade Mathematics, English &Physical Science or at least D(50%) for Standard Grade Mathematics, English & Physical Science OR an N3 or N4 Certificate with Mathematics, English, Industrial Chemistry & Engineering Science passed with at least 50%. Purpose statement Chemical engineering is concerned with the manufacturing of chemicals on an industrial scale as well as with the industrial processes that convert raw materials into products that have higher economic value. in a particular manufacturing environment, there is usually a chemical engineering team. This team is usually led by a degreed Chemical Engineer, usually assisted by a Chemical Engineering Technologist or a Chemical Engineering Technician. They all obtain their qualifications from a university of technology or a university. the technologist has obtained a BTech degree and the technician a National Diploma. the team is qualified to research, develop, design, construct and operate the plants required to make any processed product. A qualified person with sufficient experience will be able to register with the Engineering Council of South Africa (ECSA) as a Professional Technician in this field of Engineering. First Level Pre/Co-requisites Second Level Pre/Co-requisites CHE181T - Chemistry I (Theory) Co: CHE1PRA CEM211F - Chemical Engineering Pre: CHE181T; Co: CEM2PRA Technology II CHE1PRA - Chemistry I Co: CHE181T CEM2PRA - Chemical Engineering Pre: CHE181T; Co: CEM211F Technology II DCE131G - Drawing: Chemical Engineering CPI271Y - Chemical Process Industries II Pre: CHE181T I ENN103F - English for Academic Purposes ENP291Q - Engineering Physics II (Theory) Pre: FIC181C; Co: ENP2PRA EUC End-User Computing I (Theory) ENP2PRA - Engineering Physics II Pre: FIC181C; Co: ENP291Q EUP End-User Computing INC251U - Inorganic Chemistry II (Theory) Pre: CHE181T; Co: INC2PRA FIC181C - Physics I (Theory) Co: FIC1PRA INC2PRA - Inorganic Chemistry II Pre: CHE181T & CHE1PRA; Co: INC251U FIC1PRA - Physics I Co: FIC181C MAT Mathematics II (Engineering) Pre: MAT1581 MAT Mathematics I (Engineering) ORC221F - Organic Chemistry II (Theory) Pre: CHE181T; Co: ORC2PRA ORC2PRA - Organic Chemistry II Pre: CHE1PRA PCH241P - Physical Chemistry II (Theory) Pre: CHE181T; Co: PCH2PRA PCH2PRA - Physical Chemistry II Pre: CHE1PRA Rules the practical component must be done at other institutions such as Vaal University of Technology, Durban University of Technology and Cape Peninsula University of Technology, offering the same courses. If the student decides to do the practical component at these institutions, then UNISA will make the necessary arrangements and then pay the costs involved. Both the theoretical and the practical component of the subject must be passed before credit for the subject can be obtained. the practical component must be done simultaneously or after the theoretical component. Modules can be completed concurrently or in different years. Access to a personal computer is compulsory for the Practical. All study materials and examination papers (except Mathematics III) are available only in English. 24