section hinges section hinges vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 135

Size: px
Start display at page:

Download "section hinges section hinges vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 135"

Transcription

1 hinges hinges vision & style INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS WE RE CHANGING THE FUTURE EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 135

2 hinges Stiffening Rib (Standard on 1/4" thick material) Alternate Tapered Strap Available with hole pattern #1 only. Note: 5884 Series shown below with rib. No & 5885 A strong, solid hinge that provides long-lasting, smooth operation. Available with notched butt to provide greater hinge rotation, gasket clearance and use of a smaller post. Finish: Hot-dipped galvanized. Other options available. Consult factory. No. A GU Available with grease fitting. Dimensions: 4" width of strap 8-3/4" center pin to end of strap 4-13/16" butt length 1-1/4" butt width Weight: 4.2 lbs. (1/4" material) 4.9 lbs. (5/16" material) When ordering, use the following part number guidelines for available options. Example Part No. (read vertically) A U. A = Basic offset of hinge strap assembly A = 1-1/8" offset B = 1-3/8" offset 1 = Hole patterns 1 = 3 hole pattern 2 = 4 hole pattern 5 = Strap length 5 = 8-3/4" center pin to end of strap standard 8 = Style of nose 8 = Square nose 9 = Tapered nose 8 = Hinge tubing I.D. 8 =.500 I.D. std. used with No. 2X-242-A carbon steel hex-head cap screw and No nut or No SS3 stainless steel hexhead cap screw. (2) No case-hardened truss washers furnished as standard. 9 =.625 I.D. used with nylon bushings No and stainless steel pin No SS3 or brass bushing No with hex-head cap screw. 5 = Material thickness 5 = 5/16" thick without rib 4 = 1/4" thick with rib U = Unassembled assembly SBU = Unassembled assembly with stainless steel bolt. 136 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

3 hinges No Hinge Strap Standard finish white powder coat. No No Hinge butt. No Offset hinge strap. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 137

4 hinges No Carbon steel notched hinge butt. No No SS1N Notched hinge butt. 300 series stainless steel notched hinge butt. No No Dia. countersunk holes. No Dia. countersunk holes. No NB Carbon steel notched hinge butt with beveled edge. No SS3 No No SS4 No IN.63 Dia. hole overall height of 1.88". 138 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

5 hinges No SSP Polished 10 gauge 304 stainless steel hinge with rounded corners and.256" square mounting holes that accept a standard 1/4" carriage bolt. Weight.35 lbs. Optional Offsets for 6515 and 6516 Prefix Offset X-Dimension 1 1/ / / / No SSP Same as the 6515-SSP except strap is 5" long. No Carbon steel hinge with zinc finish ideal for small doors or access panels. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 139

6 hinges No No Small black engineered polymer friction hinge with adjustment screw and.177 dia. mounting holes. No No Small black engineered polymer friction hinge with adjustment screw and.197 dia. mounting holes. No No Hinge assembly similar to series with overall length of 2.50 and four.328 dia mounting holes. 140 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

7 hinges No SSP9 Stainless steel hinge assembly. Black powder coated finish. General utility hinge with slotted mounting holes for adjustment. Weight:.48 lb. No SSP9 No. DC-50-P8 Die cast hinge with mounting stands. Black powder coated finish. Blind mount fastening. No. DC1-50-P8 Die cast hinge with countersunk holes.217 dia. No. DC2-50-P8 Die cast hinge with countersunk holes.276 dia. No. DC-50-P8 No UR&L Heavy-duty lift-off hinge assembly. Ideal for truck body cargo beds and large cabinets. Available in 304 stainless steel or zinc-plated carbon steel. Weight: 1.2 lbs. (8 gauge) No UR Add SS to part number to specify 304 stainless steel in plain finish. Consult factory for optional offsets. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 141

8 hinges No X Material 10 ga. (.134") high-strength, low alloy. No X 8" stamped steel hinge for flush mounting. Has hardened steel truss bearings to effectively carry door loads. Weight: 1.71 lbs. No X Same as 5869-X except has removable hinge pin. Weight: 1.85 lbs. No X Material 10 ga. (.134") high-strength, low alloy. No X Same as 5869-X except measures ". Weight: 1.98 lbs. No X Same as 5870-X except has removable hinge pin. Weight: 2.11 lbs. No X Same as 5870-X except with (6).40" dia. mounting holes. No X Material 10 ga. (.134") highstrength, low alloy. No X 8" over-the-seal stamped steel hinge for flush mounting. Hardened steel truss bearings and offset. Weight: 1.65 lbs. 142 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

9 hinges No XR&L 8" over-the-seal stamped steel hinge furnished with 2-5/8" wide narrow hinge butt, nylon bushings and steel hinge pin. Specify right or left hand when ordering. Weight: 1.16 lbs. No XL Material 10 ga. (.134") high-strength, low alloy. No. AL Aluminum 8" hinge available on request quote. Same as X except has stainless steel hinge pin and is furnished in 7-ga. (.179") thick material. Weight:.53 lbs. No X Material 10-ga. (.134") high-strength, low alloy. No X Same as No X except measures ". Weight: 2.00 lbs. No X Same as No X except has removable hinge pin. Weight: 2.00 lbs. No X Same as 5890-X except with (6).40" dia. mounting holes. No XL No XR&L Malleable iron, radius butt hinge. Stamped mounting type hinge assembly. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 143

10 EBERHARD EBERHARD hinges To customize the hinge butt or strap with your company logo, consult factory. No SSP No SSP 304 stainless steel. 3-1/2" long x 1-1/2" wide strap. Burnished finish. Weight:.59 lbs. Note: Offsets for 6511 and 6521 Series No SSP Prefix Offset Dim. X Dim. 1 1/8" 1.04" 2 1/4".98" 3 5/16".93" No SSP 304 stainless steel. 5" long x 1-1/2" wide strap. Burnished finish. Weight:.72 lbs. No SSP No SSP ", Flush DIA. EMBOSS (TYP.) SQUARE HOLE.330 (5-PLACES) DIA. PIN.00± RAD..50 RAD..16 TYPE 304 STAINLESS STEEL.06 DEEP EMBOSS (5-PLACES) No SSP 8", Flush. No SSP DIA. EMBOSS (TYP.) No SSP ", overseal, offset. No SSP 8", overseal, offset SQUARE HOLE.330 (5-PLACES) DIA. PIN.50 RAD..74 RAD..00± TYPE 304 STAINLESS STEEL RAD..06 DEEP EMBOSS (5-PLACES) EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

11 hinges No SSP 304 stainless steel. 8" long x 1-1/2" wide strap. Burnished finish. Weight: 2.0 lbs. No SSP No SSP 304 stainless steel. 8" long x 2" wide strap. Burnished finish. Weight: 2.4 lbs. Prefix Offset Dim. X Dim. Note: Offsets for 6531, 6532, 6541, and 6542 Series. 1 1/8" 1.47" 2 1/4" 1.41" 3 5/16" 1.37" 4 3/8" 1.31" No SSP 304 stainless steel. " long x 1-1/2" wide strap. Burnished finish. Weight: 2.5 lbs. No SSP No SSP 304 stainless steel. " long x 2" wide strap. Burnished finish. Weight: 3.0 lbs. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 145

12 hinges To customize the hinge butt with your company logo, consult factory. No SSP No SSP " Hinge features a reverse butt which allows for 270 rotation. 304 stainless steel, burnished finish. Hinge strap has 3/8" offset. Weight: 2.5 lbs. Features extra mounting hole in hinge butt. Extended mounting hole pattern in hinge strap to allow for wider extrusions around door frame. 304 stainless steel, burnished finish. " long. Weight: 3.0 lbs. No SSP No SSP Prefix Offset Dim. X Dim. 1 1/8" 1.34" 2 1/4" 1.28" 3 5/16" 1.24" 4 3/8" 1.19" No L No R&L 5" stamped steel hinge for flush mounting. Has nylon sleeve bearings for easier operation. Weight: 1.1 lbs. No L No R&L Same as No except designed for over-the-seal flush mounting. Weight: 1.4 lbs. 146 EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS

13 hinges No X Hinge strap 11-7/8" length, 1-5/8" offset, (2) 3/8" dia. mounting holes, carbon steel. No X request quote No Hinge butt carbon steel 2" offset, 1" wide, 1/2" dia. hole. No No. 71-SS1 Hinge butt. No. 71-SS1 No. 287B87-RM&L Hinge bracket. Right-hand opposite No. 287B87-RM&L Specifications: Malleable nylon bushing for 3/8" diameter pin. Mounting hole 11/32" center to center 1-1/4" Weight:.34 lbs. EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS 147

14 hinges No SS No SS 5" stainless steel die cast hinge assembly with mounting holes. No Sams a No SS except stainless steel and black E-coat finish. No No Carbon steel hinge assembly with light stainless steel spring and four.20 dia. mounting holes. No Carbon steel hinge assembly with heavy stainless steel spring EBERHARD INDUSTRIAL, VEHICULAR & SPECIALTY SYSTEMS