Section 4 Handles, Hinges & Safety Switches

Size: px
Start display at page:

Download "Section 4 Handles, Hinges & Safety Switches"

Transcription

1 Contents Section 4 Light Duty Handles 53 Dead Bolt 62 Angle Handles 53 Door Stops 63 Plastic Handles 54 Ratchet Lock 63 Tube Handles 54 Aluminum Hinges Quarter Turn Latches Latch Accessories 57 Steel Hinges 66 Ball Catch 58 Brackets - 1.5" 58 Brackets - 1" 59 Ball Plungers 59 Plastic Hinges 67 Magnetic Catches 60 Adjustable Hinges 68 Positioning Hinges 68 Grabber Catch 61 Grabber Catch w/micro Switch 61 Pivot Joints 69 Slam Latch 62 Safety Switches Parker Hannifin Corporation

2 Handles Handle for light duty doors with a maximum thickness of 5/16". Primarily for mounting to a stand alone panel. Light Duty Aluminum, Clear Anodized Recommended Fastening Hardware (Included) Two #10-32 x 5/8" BHCS [ ] 7.32" 1.18" #10-32 X 0.55" DP Light Duty Aluminum Handle Each 0.19 lb " Angle Handles, Hinges & Switches 1.38" 4.49" 1.30" Handle for double doors to keep operator s hands from hitting when Glass-Fiber Reinforced Plastic Black Matte Finish opening. Screws 1/4-20 X 5/8" BHCS T-Nuts Any 1/4 [25-001, ] Screws 1/4-20 X 1/2" BHCS [ ] T-Nuts Any 1/4 [25-031, ] C'Bored For 1/4-20 BHCS 2.91" 3.68" Open Angled Handle Each 0.19 lb Closed Angled Handle Each 0.21 lb " 1.30" C'Bored For 1/4-20 BHCS 4.49" 2.91" 3.68" Parker Hannifin Corporation

3 Handles Plastic Handles Multipurpose handle for mounting onto plastic panels or profiles. 1/4 T-Nut Handle [23-031] Glass-Filled Nylon, Black 1/4-20 x 3/4" SHCS [ ] C B A Screws 1/4-20 X 11/16" SHCS [ ] T-Nuts Any 1/4 [25-001, ] Screws 1/4-20 X 1/2" SHCS [ ] T-Nuts Any 1/4 [25-031, ] Screws 1/4-20 X 3/4" SHCS [ ] T-Nuts Any 1/4 [25-001, ] Screws 1/4-20 X 5/8" SHCS [ ] T-Nuts Any 1/4 [25-031, ] z1 Screws 5/16-18 x 3/4" SHCS [ ] T-Nuts Any 5/16 [25-002, ] D E ØF , z1, ØG H Dimensions Weight A B C D E F G H (lb) Part # z1 Tube Handles Steel Tube Cut to Length [13-010] Tube Handle Ends [23-072] A " Ø1.19" Tube Handle Center Support [23-073] A 1.81" " 2.36" 2.13" 3.15" 1.34" Ø1.19" 1.5 Handle that allows variable lengths. Order Ends and Tube cut to length for a custom length handle. Polyamide, Black Screws [23-072] 5/16-18 x 3/4" SHCS [ ] [23-073] 5/16-18 x 1" SHCS [ ] T-Nuts Any 5/16 [25-002, ] 3.15" 1.34" " 2.36" Tube Handle Ends Set of 2 (R&L) 0.5 lb Tube Handle Center Support Each 0.3 lb * Coated Steel Tube Cut off Max 96" (8') 0.24 lb/ft *Order Center Support for handles over 36" (3') long. 54 Parker Hannifin Corporation

4 Quarter Turn Latches Cam [23-140z5] Backing Plate (order separately page 57 ) [23-038z1] Quarter Turn Extrusion Mount Included with Handle 1/4-20 x 1/2 FHCS [ ] 1/4-20 T-Nut Ø1.25" 1.54" 1.97" L-Handle - Locking [23-039] 1.5" Series Cam [23-140z5] Hooked Cam [23-142z1] Keeper Bracket [23-140z7] #10-32 x 5/8" BHCS [ ] #10 Flat Washer [ ] #10-32 T-Nut [25-009] 4.13" M22x /16"-1/8" Quarter turn latches can be used for swinging, sliding or bi-fold door applications. T-handle and wing knob styles eliminate the need for a door handle. 0-1/2" Ø0.875" Machining for any of the quarter turn locks. 3.07" 1.06" 1.97" M22x " Handles, Hinges & Switches Handle Polyamide, Black Housing/Insert: Zinc Die, Black powder coated Ø1.26" M22x1.5 Note: All cams must be ordered separately (see page 57). 1.97" L-Handle, Non-Locking Each 0.46 lb L-Handle, Locking 1 Each 0.46 lb T-Handle, Non-Locking Each 0.44 lb Wing Knob, Locking 1 Each 0.35 lb Square Insert 2, 3 Each 0.24 lb All locks come keyed alike; special keying options available as special order. 2 Additional style inserts are available as special orders. 3 Order key separately (see page 57). 0.79" 1.97" Ø1.26" 0.24" 1.97" M22x Parker Hannifin Corporation

5 Quarter Turn Latches Quarter Turn Panel Mount Cam 45-2 [23-140z4] Multibock 1.5" [22-115] 0.59" 1.32" M22x1.5 1/16" - 5/16" 1.375" 1/16" - 1/8" Add a multiblock as a door stop for panel doors. 3.07" 1.26" Cam 45-8 [23-140z8] Ø0.875" " 0.71" 0.37" Machining for any of the quarter turn lock. 1/16" - 5/16" 1.438" 1/16" - 1/8" 1.97" Ø1.26" M22x " 0.71" Quarter turn latches can be installed into a swinging door panel, and the latch can be used with either 1.5" or 1" profiles. T-Handle and wing knob styles eliminate the need for a door handle. Note: All cams must be ordered separately. Handle Polyamide, Black Housing/Insert: Zinc Die, Black powder coated Ø1.26" M22x1.5 T-Handle, Non-Locking Each 0.30 lb Wing Knob, Locking 1 Each 0.20 lb Square Insert 2,3 Each 0.11 lb " 0.71" 1 All locks come keyed alike; special keying options available as special order. 2 Additional style inserts are available as special orders. 3 Order key separately. Inside Handle Inside handle can be combined with any of our quarter turn handles to provide a double handle system. The handle is designed to slip over the cam on the inside of the door. Quarter Turn Handle L-Handle, Locking [23-039] 3.94" Polyamide, Red 0.91" 1.10" Ø0.24" 0.45" Inside handle shown in combination with a L-Handle Locking. Inside Handle Each 0.02 lb Parker Hannifin Corporation

6 Latch Accessories Various cams and keys for the quarter turn latches. You must order one cam per quarter turn lock. Door Stop - Straight [23-125] Cams & Keys Part # z z z8 Dimensions (in) A B C Add a door stop to swinging door to create a positive stop. Cam 45-2 Each 0.05 lb z4 Cam Each 0.04 lb z5 Cam 45-8 Each 0.05 lb z8 Hooked Cam Each 0.03 lb z1 Spare Key for / Each 0.01 lb z1 Square Key for / Each 0.01 lb z2 1.5 Keeper brackets are used with a hooked cam on bi-fold or sliding doors. B 0.16" A 1.30" C 0.28" z z z z1 Keeper Bracket Handles, Hinges & Switches Aluminum, Clear Anodized Recommended Fastening Hardware (Order Separately) Screws #10-32 x 5/8" BHCS [ ] Washer #10-32 Flat Washer [ ] T-Nut Any #10-32 [25-009, ] Keeper Bracket Each 0.03 lb z7 1.5 Backing plates can be added to a quarter turn latch and provide a positive stop for the door. 1.26" Ø0.22" 0.13" 0.63" 0.47" 0.71" z7 Backing Plate Steel, Matte Black Powder Coated Screws 1/4-20 x 1/2" FHCS [ ] T-Nuts Any 1/4 [25-031, , ] 0.12" 2.68" For 1/4 FHCS Ø1.28" 1.97" Backing Plate Each 0.01 lb z1 2.13" z1 57 Parker Hannifin Corporation

7 Door Catches Ball Catch 1/2" HEX 1/4-20 T-Nut 1/4-20 5/16-18 x 5/8" [ ] 1.10" Ø0.26" 0.79" 1.46" " 1.02" 1.89" 0.39" 1/4-20 T-Nut 1/4-20 T-Nut 1/4-20 x 5/8" FHCS [ ] 1/4-20 x 5/8" Panel Material Ball Latch [23-121] 1/32" Min 9/16" Max 1/4-20 T-Nut 2.00" 1/ " Ball Catch [23-120] 1/4-20 x 5/8" BHCS Ball Catch Bracket 1.5" Style 2 can be used when a panel is in the top T-slot. You must leave at least a 7/32" gap between the top door beam and the top beam of the frame. Tap 1/4-20 3/8" 1/16" - 3/32" 2.00" 1.46" 0.19" 0.34" 1.5 Catch for use on swinging and sliding doors. Brackets can be used to mount the catch in the location that you desire. When using the Style 2 bracket, you must leave a 7/32" gap. Housing: Glass-filled Nylon, Black Ball Screw: St, Zinc Plated Bracket: Al, Anodized " 2.50" 0.69" 0.19" 1.46" C'sink for 1/4-20 Screw 1/ " Ball Catch to Extrusion (no bracket) Screws (2) 1/4-20 x 3/4" BHCS [ ] T-Nuts (3) 1/4-20 [25-001, , ] Ball Catch with Style 1 Bracket to Extrusion Screws (2) 5/16-18 x 5/8" BHCS [ ] and (2) 1/4-20 x 5/8" BHCS T-Nuts (2) 5/16-18 [25-002, , ] or double T-nut [25-042] and (1) 1/4-20 [25-001, , ] Ball Catch with Style 2 Bracket to Extrusion Screws (2) 1/4-20 x 5/8" BHCS and (2) 1/4-20 x 5/8" FHCS [ ] T-Nuts* (3) 1/4-20 [25-001, , ] *You might also be able to use a double T-nut [25-048, ] for mounting to extrusion Ball Catch Each 0.05 lb Ball Catch Bracket 1.5" Style 1 Each 0.09 lb Ball Catch Bracket 1.5" Style 2 Each 0.09 lb Parker Hannifin Corporation

8 Door Catches 1/4 T-Nut [25-031] 1/4 T-Nut [25-031] Ball Catch Bracket 1" [23-137] 1/4-20 x 1/2" BHCS [ ] Ball Catch (cont.) Spacer comes with Ball Catch Bracket 1" 1/4-20 x 5/8" BHCS Ball Catch [23-121] 1.46" 1/ " 1.25" 1 Bracket for using the standard ball catch with a 1" profile. Also includes spacer to allow ball catch to be used in profile. Screws (2) 1/4-20 x 1/2" BHCS and (2) 1/4-20 x 1/2" BHCS [ ] T-Nuts (3) 1/4 T-Nuts [25-031, or ] Aluminum, Clear Anodized Ball Catch Bracket 1" Each 0.16 lb " 2.00" 0.28" 0.56" 0.38" Handles, Hinges & Switches Ø Ball Plungers 0.17" to 0.27" Range Ø0.375" 1.10" Ø0.44" Ball plungers are an economincal solution to hold swinging doors closed. The ball plunger presses easily into a machined hole in the extrusion, and the force of the ball in combination with a T-slot on the door frame holds the door closed. 0.12" to 0.20" Range Housing: Steel Ball: Nylon Ball Plunger, 1/2" Dia. x 1.10" (for ) Each 0.05 lb Ball Plunger, 3/8" Dia. x 0.786" (for ) Each 0.03 lb " Ø0.31" 0.11" 0.11" 0.72" 0.08" " Parker Hannifin Corporation

9 Door Catches Magnetic Catches #10-32 T-Nut [25-009] 1/4-20 T-Nut Single Bracket 1.5" [23-122] #10-32 T-Nut [25-009] #10-32 x 1/2" [ ] Magnetic Catch Bracket [23-119] 5/32" Min #10-32 x 3/8" 1.18" Ø0.224" 1/4-20 x 5/8" BHCS Magnetic Catch [23-046] 1/4-20 x 1" BHCS [ ] 1/4-20 x 3/4" BHCS [ ] Magnetic Catch [23-046] #10-32 T-Nut [25-009] 1.09" 0.52" 0.72" 0.43" 0.79" 0.39" 1.57" ".460" Max To be Flush 1/4-20 T-Nut 1/4-20 x 5/8" BHCS 1/4-20 x 3/4" BHCS [ ] 1/4 T-Nut [25-031] 0.215" Max To be Flush Holding Force X 4.5 lbs Y 2.25 lbs X Y " 0.11" Quick catch for swinging or sliding doors. For different holding strengths, rotate catch 180. Adjust mounting position using slotted holes and appropriate mounting bracket if needed. Complete with pan head screw, or add optional plate for smooth mounting. Magnetic Catch: Glass filled Nylon, Black with pan head screw and hexagon nut Strike Plate: St, Zinc Plated with pressure sensitive adhesive Mounting Bracket: Aluminum, Clear Anodized 0.63" 0.38" 1.75" 1.18" /4-20 Ø0.344" For #10-32 FHCS 3.00" 0.63" 0.87" 1.18" 1.63" 1.38" 0.125" /4-20 Recommended Fastening Hardware* (Order Separately) Magnetic Catch to Extrusion (no bracket) Screws 1/4-20 x 3/4" BHCS [ ] T-Nuts (2) 1/4-20 T-nuts (25-001, , ] Screws 1/4-20 x 5/8" BHCS T-Nuts (2) 1/4-20 [25-031, , ] Magnetic Catch with Single Bracket 1.5" Screws (2) 1/4-20 x 5/8" BHCS and (2) 1/4-20 x 1" BHCS [ ] T-Nuts (2) 1/4-20 [25-001, , ] Magnetic Catch with Magnetic Catch Bracket Screws (2) 1/4-20 x 3/4" BHCS [ ] and (2) #10-32 x 1/2" FHCS [ ] T-Nuts (2) #10-32 [25-009, ] *Fastening sets may need #10-32 T-nut for Pan head screw when mounting to extrusion. Magnetic Catch Each 0.08 lb Strike Plate Each 0.02 lb Single Bracket 1.5" Each 0.13 lb Magnetic Catch Bracket Each 0.13 lb Parker Hannifin Corporation

10 Door Catches Grabber Catch [23-210] #8-32 x 3/8" BHCS [ ] #8-32 Economy T-Nut [25-045] #4-40 BHCS [25-440] 1/4-20 x 1/2" BHCS [ ] 0.45" 2.01" 0.16" 0.93" 2.83" Grabber Catch Ø0.17" Aluminum Hinge 6" Min 1/4-20 T-Nut [25-030] 0.17" 0.16" 0.54" 1.11" 0.32" Grabber Catch Flat Bracket [23-213] #8-32 x 5/8" BHCS [ ] and #8-32 Hex Nut [ ] A (Common) B (Live when LatchisClosed) C (Live when Latch is open) 0.27" 1.90" 0.10" 1.60" Ø0.13" 0.57" 0.20" /4-20 x 5/8" and 1/2-20 T-Nut Push to close, pull to open door catch for mounting inside of enclosures. Catch with micro-switch is designed to operate a warning system and is not to be used as a safety switch. Catch Nylon, Black Approximate pull-up force: lbs lbs Bracket Aluminum, Clear Anodized 0.618" 0.972" 0.88" 0.27" 1.55" Handles, Hinges & Switches Recommended Fastening Hardware for Catch (2) #4-40 Screws [25-440] to attach catch to bracket are included. Fasteners apply to both brackets. Hook Order correct length #8-32 screw and appropriate nut to attach hook to either profile or panel. Recommended Fastening Hardware for Bracket (Order Separately) Screws 1/4-20 x 5/8" T-Nuts Any 1/4 [25-001, , ] Screws 1/4-20 x 1/2" [ ] T-Nuts Any 1/4 [25-031, , ] Grabber Door Catch Each 0.04 lb Grabber Catch w/micro-switch Each 0.05 lb Grabber Catch Bracket - 90 Each 0.03 lb Grabber Catch Bracket - Flat Each 0.02 lb " 0.25" 3.00" 0.19" Ø0.28" #4-40 UNC 0.25" Ø0.28" 1.38" 3.00" 1.60" 0.31" #4-40 UNC 0.38" Parker Hannifin Corporation

11 Door Latches Slam Latch 1/4-20 x 1 1/4" SHCS [ ] Ø0.28 THRU Ø " 1.18" 0.79" 2.09" 2.55" 1.38" 3.15" 2.95" 2.56" 1.5 High strength latch designed to securely close door to the frame. An optional key locking version is available for extra security. Die-Cast Zinc, Black Screws 1/4-20 x 1¼" [ ] Slam Latch - Locking* Each 1.25 lb Slam Latch - Non-Locking Each 1.25 lb *All locks come keyed alike; special keying options available as special order. Deadbolt 1/4 T-Nut Dead Bolt Latch [23-160] 1/4-20 x 5/8" BHCS Ø0.26" 1.10" Designed to secure doors using a spring loaded latch mechanism. Combine this with a door stop for a great latching solution. Die-Cast Zinc, Clear " 0.47" 0.20" 1/5" Series Screws 1/4-20 x 5/8" BHCS T-Nuts Any 1/4 [25-001, , ] Screws 1/4-20 x 1/2" BHCS [ ] T-Nuts Any 1/4 [25-031, , ] Dead Bolt Latch Each 0.2 lb Parker Hannifin Corporation

12 Door Stops & Ratchet Locks Door Stop 1" - Angle [23-126] Optional Velcro Plate [23-158] Min - 7/32" - 5/32" Door Stops Optional Velcro Plate [23-158] Door Stop - Straight [23-124] A Dimensions (in) B C D E F # /4-20 Ø0.28" 2.00" 0.25" 2.00" 0.44" Door stops provide a positive stop to keep the door lined up with the frame. An optional Velcro plate can be added to create a catch to keep the door closed. Aluminum, Clear Anodized with Velcro Pad / /4-20 x 7/8 BHCS 1/4-20 x 5/8 FHCS #10-32 x 1/2 FHCS Screws [ ] [ ] [ ] T-Nuts or or or /4-20 x 3/4 BHCS #10-32 x 3/8 FHCS #10-32 x 3/8 FHCS Screws [ ] [ ] [ ] T-Nuts or or or D C A F E B B Handles, Hinges & Switches Door Stop - Straight Each 0.2 lb Door Stop 1.5" - Angle Each 0.2 lb Door Stop 1" - Angle Each 0.1 lb Velcro Plate Each 0.02 lb " For #10-32 FHCS 2.00" Used to lock overlapping sliding panels up to 1/4" thick. Particularly suitable for display cases when used with sliding door guide profiles. Steel, Nickel Plated Includes two Keys Minimum Panel Overlap = 1" Ratchet Lock Each 0.2 lb Ratchet Lock 4.53" 1.26" Parker Hannifin Corporation

13 Hinges Aluminum Hinges 1.5" to 2.00" 0.08" 1.5" to " " to 1.5" Double Hinge Pin [23-625] 1.5" Receptacle [23-624] 0.06" Any style of hinge can be made by combining individual hinge halves. You can create an extremely heavy duty hinge by combining 7 halves to create one hinge. Dimenisons Body - Aluminum, Clear Anodized Pin - Stainless Steel Receptical - Self-Lubricating Bronze Bushing Washer - Nylon G H B C F E D A K J Dimensions (in) Weight Part # A B C D E F G H J K (lb) / / / / / / # # # # # # Parker Hannifin Corporation

14 Hinges Aluminum Hinges 1.5" Receptacle [23-624] Long Upper Pin 1.5" [23-620] 1" Receptacle [23-634] Long Upper Pin 1.5" [23-621] L Short Lower Pin 1.5" [23-622] Short Lower Pin 1.5" [23-623] " to 1.5" Right Door 1.5" to 1" Left Door (23-626R Illustrated) (23-640L Illustrated) Part # L R L R L R R 1.5" to L Handles, Hinges & Switches Screws 1/4-20 x 5/8" T-Nuts Any 1/4 [25-001, , ] Screws #10-32 x 1/2" [ ] T-Nuts Any #10-32 [25-031, , ] R Ordering Information Unit Part # Aluminum Lift-off Hinge 1.5" - Left Pair L Aluminum Lift-off Hinge 1.5" - Fixed Each Aluminum Lift-off Hinge 1.5" - Right Pair R L Aluminum Lift-off Hinge 1.5" to 1" - Left Pair L Aluminum Lift-off Hinge 1.5" to 1" - Fixed Each Aluminum Lift-off Hinge 1.5" to 1" - Right Pair R Aluminum Lift-off Hinge 1" - Left Pair L Aluminum Lift-off Hinge 1" - Fixed Each Aluminum Lift-off Hinge 1" - Right Pair R R 65 Parker Hannifin Corporation

15 Hinges Steel 1/4-20 T-Nut [25-031] Steel Hinge 1" - Left [23-250L] Ø0.32" 2.50" 1/4-20 x 3/8" BHCS [ ] 2.50" 1.58" 1.5" to 1.5" to 1" to 0.090" 0.075" " 0.15" 0.08" 0 to 0.18" Ø0.32" 2.50" 2.19" Ø0.28" 1.58" Steel hinges for constructing guard/enclosure doors. Lift off option allows access into enclosure. Specify a left hand or right hand lift-off hinge set depending on required direction of door opening. Steel, Black Zinc Plated " 0.10" Screws 1/4-20 x 1/2" BHCS [ ] T-Nuts Any 1/4-20 [25-001, , ] Screws 1/4-20 x 3/8" BHCS [ ] T-Nuts Any 1/4-20 [25-031, , ] " Ø0.28" 2.50" 1.58" 0.10" Ordering Information Unit* Weight Part # Steel Hinge 1.5" - Left Pair 0.4 lb L Steel Hinge 1.5" - Fixed Pair 0.4 lb Steel Hinge 1.5" - Right Pair 0.4 lb R Steel Hinge 1" to 1.5" - Left Pair 0.3 lb L Steel Hinge 1" to 1.5" - Fixed Pair 0.3 lb Steel Hinge 1" to 1.5" - Right Pair 0.3 lb R Steel Hinge 1" - Left Pair 0.28 lb L Steel Hinge 1" - Fixed Pair 0.28 lb Steel Hinge 1" - Right Pair 0.28 lb R *Pair consists of two complete hinges. 66 Parker Hannifin Corporation

16 Hinges 1/4 T-Nut Medium Duty Plastic Non-Removable Hinge 1.5 [23-551] 1/4-20 x 3/4" FHCS [ ] 1.5" to 1.5" to 1" to NON-REMOVABLE 0.07" 0.13" 0.18" Handles, Hinges & Switches High quality plastic hinges for constructing medium duty guard/ enclosure doors. Hinges are offered in two types: lift off (for left and right hand doors) and non-removable. Glass-Filled Nylon, Black with stainless steel pin Max. Torque: 74 ft-lbs Screws 1/4-20 x 3/4" FHCS [ ] T-Nuts Any 1/4-20 [25-001, , ] Screws 1/4-20 x 1/2" FHCS [ ] T-Nuts Any 1/4-20 [25-031, , ] LIFT OFF Dimensions (in) Part # A B L R L R L R Plastic Hinge 1.5" - Left Each 0.99 oz L Plastic Hinge 1.5" Each 0.99 oz Plastic Hinge 1.5" - Right Each 0.99 oz R Plastic Hinge 1" to 1.5" - Left Each 1.23 oz L Plastic Hinge 1" to 1.5" Each 1.23 oz Plastic Hinge 1" to 1.5" - Right Each 1.23 oz R Plastic Hinge 1" - Left Each 1.52 oz L Plastic Hinge 1" Each 1.52 oz Plastic Hinge 1" - Right Each 1.52 oz R 1.10" For 1/4 FHCS A B 1.89" 67 Parker Hannifin Corporation

17 Hinges Adjustable 1/4 Hex Nut [ ] 1/4-20 T-Nut Torque Adjusting Screw Ø0.27" 1.88" Adjustable Hinge 1 [23-222] Adjustable Hinge 2 [23-220] 2.25" 0.20" Polycarbonate Panel 1/4-20 x 5/8" BHCS 1.88" Ø0.27" " " Covers 1.44" 2.25" 1.34" 0.77" 0.23" For #8 Screw Positioning 0.71" Torque Adjusting Screw For #10 Screw 2.50" 1.69" 2.05" Adjustable tension hinge for swinging doors to hold door open, partially open Acetal, Black Polycarbonate hinge pin or closed. Can also adjust speed of Maximum Torque: opening or closing in-lbs in-lbs Series Type Screws 1/4-20 x 5/8 BHCS T-Nuts 1/4-20 [25-001, , ] Screws #8-32 x 3/8 BHCS [ ] T-Nuts #8-32 Economy [25-045] Adjustable Hinge 1(for ) Each 1.5 oz Adjustable Hinge 2 (for ) Each 1.0 oz Multiple position hinge for all swinging doors. Models with preset angles also open to 180. Acetal, Black Positioning Torque 10 in-lbs Maximum Load: Radial 100 lbs Axial 100 lbs #10-32 Hex Nut [ ] Positioning Hinge [23-224] Panel #10-32 T-Nut [25-009] Ø0.205" 1.34" #10-32 X 1/2" BHCS [ ] For attaching to profile Screws #10-32 x 1/2" BHCS [ ] T-Nuts Any #10-32 [25-009, ] Screws #10-32 x 3/8" BHCS [ ] T-Nuts Any #10-32 [25-030, , ] Positioning Hinge 80 Each 1.3 oz Positioning Hinge 115 Each 1.3 oz Positioning Hinge 150 Each 1.4 oz Parker Hannifin Corporation

18 Hinges 5/16-18 X 5/8" BHCS [ ] and 5/16-18 T-Nut [25-002] 5/18-18 X 3/4" BHCS [ ] and tap end of extrusion 5/8" deep Pivot Joint Pivot Joint [23-262] G Dimensions (in) A B C D E F G * For connecting profiles at various angles from 0 to 180, eliminating the need for a miter cut. Die cast inserts provide alignment with the profile and prevent rotation when mounted to end or side of profile. Zinc Die Casting C F E A B D Handles, Hinges & Switches Attachment to T-Slot Screws 5/16-18 x 5/8 [ ] T-Nuts Any 5/16 [25-002, , ] Screws 1/4-20 x 1/2" [ ] T-Nuts Any 1/4 [25-031, , ] Attachment to End of Profile Screws 5/16-18 x 3/4" [ ] Screws 1/4-20 x 3/4" [ ] Pivot Joint 1.5", Blk Each 0.7 lb Pivot Joint 1.5", Blk - Locking Each 0.9 lb Pivot Joint 1", Blk Each 0.24 lb Pivot Joint 1", Blk - Locking Each 0.40 lb Parker Hannifin Corporation

19 Safety Switches Mini Key-Operated Mini Key-Operated Safety Switch #8-32 x 1/2" BHCS [ ] Mini Key Switch with Angle Acutator [23-058] #8-32 x 5/8" SHCS [ ] 0.79" 0.04" Ø0.17" 1.18" 1.38" 1/4 T-Nut 1/4-20 x 5/8 BHCS Mini Key Mounting Bracket [23-102] 0.59" 3.07" Label Side Up Label Side Down 0.55" 0.55" Configurable for either swinging or sliding doors. Mounting - The switch may be mounted label side down or label side up to give four possible actuator entry points " Ø0.17" 0.55" 0.55" 0.28" Ø0.17" " 0.19" 0.38" # " 0.28" This safety switch is a compact low-cost solution. The flexible mounting options allow a multitude of configurations, while still meeting NEMA 6 code. The size of the switch also allows for a small swing radius. Case Material: UL List Glass Filled Polyester Actuator: Stainless Steel Roller Contacts: 1 N/C + 1 N/O *Note - You can purchase an optional Flex Key to obtain a minimum swing radius of 2.76". Consult factory for details. Actuator Screws (2) #8-32 x 1/2" BHCS [ ] & (2) #8-32 x 5/8" SHCS [ ] T-Nut #8-32 Economy Offset [25-045] Screws (2) #8-32 x 3/8" BHCS [ ] & (2) #8-32 x 5/8" SHCS [ ] T-Nut #8-32 Economy Offset [25-039] Mini-Key Bracket Screws 1/4-20 x 5/8" BHCS T-Nut Any 1/4 [25-001, , ] Mini Key Safety Switch - Straight Key Each 5 oz Mini Key Safety Switch - Angled Key Each 5 oz Mini Key Mounting Bracket Each 3 oz *Ships with 39.3" of cable attached. 70 Parker Hannifin Corporation

20 Safety Switches Mini Key Safety Switch - Angled Key [23-058] Adjustment Plate (included with bracket) 1.5 Mounting bracket for the Mini Key Switch where a panel will prevent the use of mounting T-slots. You must leave a 3/16" gap when using this bracket. #10-32 x 1/2" FHCS [ ] & #10-32 T-Nut [25-009] 0.19" Aluminum, Clear Anodized 1/4-20 x 5/8" BHCS & 1/4 T-Nut Actuator Screws (2) #8-32 x 3/16" BHCS [ ] & (2) #8-32 x 5/8" SHCS [ ] T-Nut #8-32 Economy Offset [25-045] Brackets Screws (2) #10-32 x 1/2" FHCS [ ] & (2) 1/4-20 x 5/8" BHCS T-Nuts (2) #10-32 [25-009] & (2) 1/4 Mini Key Mounting Bracket - Top Each 2 oz " 0.83" 0.63" #8-32 Mini Brackets Swinging Door Top Mount Bracket 1/ " 0.63" 0.13" #8-32 C'Sink for #10-32 Screw 2.00" 2.50" 0.55" Ø0.22" 0.63" 3.00" 0.19" Handles, Hinges & Switches Adjustable Brackets #10-32 x 5/8" BHCS [ ] & #10-32 T-Nut [25-009] Roller PA (see page xx) Sliding Vertical Door Bracket Mini Key Safety Switch - Straight Key [23-059] 1.5 Mounting bracket for the Mini Key Switch on vertivcal or horizontal sliding doors. The brackets are slotted to allow for a variety of adjustments. Aluminum, Clear Anodized 1/4-20 x 5/8" BHCS & 1/4 T-Nut 4.50" Ø0.28" 0.83" # " 5.00" 0.19" Actuator Screws (2) #8-32 x 3/16" BHCS [ ] & (2) #8-32 x 5/8" SHCS [ ] T-Nut #8-32 Economy Offset [25-045] Brackets Screws (2) #10-32 x 1/2" FHCS [ ] & (2) 1/4-20 x 5/8" BHCS T-Nuts (2) #10-32 [25-009] & (2) 1/4 Mini Key Mounting Bracket - Sliding Each 1 oz # " 0.55" Ø0.22" 0.63" Parker Hannifin Corporation

21 Safety Switches Switch 1 Rotates to allow entry at all 4 side positions. #10-32x5/8"BHCS [ ] and #10-32 T-Nut [25-009] Safety Switch 1 [ or ] #8-32 x 1 3/8" BHCS [ ] 0.98" 1.14" 0.26" 1/4 T-Nut 1/4-20 x 5/8" BHCS 3.11" 1.52" 0.12" 0.71" 0.41" Ø0.16" * All dimension shown are with stainless steel guide attached. 0.61" 0.33" 0.47" 2.19" 1.57" 0.59" 1.5 This safety switch is a compact low cost solution. The rotatable head allows key entry from all positions while still meeting NEMA 6 code. The size of the switch also allows for a small swing radius. Safety Switch Mounting Bracket [23-104] Switching Ability AC: 500V-1A, 250V-2A, 100V-5A DC: 250V-0.5A, 24V-2A Auxiliary Contacts: 1 N/O (1N/C + 1N/O switch only) Max Switching Current/Volt/Amp 500 V/500 VA Minimum Current: 5V 5mA DC Protection: IP67 (NEMA 6) Conforms to: EN1088,EN292, UL and C-UL Listed Ø0.28" 2.00" Actuator Screws (2) #10-32 x 5/8" BHCS [ ] & (2) #8-32 x 1 3/8" BHCS [ ] T-Nuts (2) Any #10-32 [25-009] Bracket [23-104] Screws 1/4-20 x 5/8" BHCS T-Nut Any 1/4 [25-001, , ] 1.83" 0.71" 2.50" 0.63" # " #10-32 Safety Switch 1 (1 N/C + 1 N/O) Each 3.1 oz Safety Switch 1 (2 N/C) Each 3.1 oz Safety Switch Mounting Bracket Each 3.0 oz " 1.18" 72 Parker Hannifin Corporation

22 Safety Switches #10-32 x 5/8" BHCS [ ] and #10-32 T-Nut [25-009] Safety Switch 2 [ or ] #10-32 x 1 1/2" BHCS [ ] Switch 2 Rotates to allow entry at all 4 side positions. 1/4 T-Nut 1/4-30 x 5/8" BHCS Safety Switch Mounting Bracket [23-104] 1.57" 1.22" 1.5 This safety switch is a strong yet compact and versatile solution. The rotatable head allows key entry from all positions while still meeting NEMA 6 code. This switch is designed for a minimum of two million actuations. Switching Ability AC: 230V, 4A DC: 24V, 4A Auxiliary Contacts: 1 N/O, 2N/C Max Switching Current/Volt/Amp 12V at 10mA Minimum Current: 1mA at 24V Protection: IP67 (NEMA 6) Conforms to: EN1088, EN292, UL and C-UL Listed 1.65" 1.36" 5.08" 1.85" 0.12" 0.87" R0.20" 1.18" 1.22" * All dimensions shown are with stainless steel guide attached. 3.11" Handles, Hinges & Switches 1.97" Actuator Screws (2) #10-32 x 5/8" BHCS [ ] & (2) #10-32 x 1 1/2" BHCS [ ] T-Nuts (2) Any #10-32 [25-009] 0.53" 1.57" 0.59" Bracket [23-104] Screws 1/4-20 x 5/8" BHCS T-Nut Any 1/4 [25-001, , ] 1.30" 0.91" 0.16" Safety Switch 2 (1 N/C + 1 N/O) Each 6 oz Safety Switch 2 (2 N/C + 2 N/O) Each 6 oz Safety Switch Mounting Bracket Each 3 oz See previous page for bracket dimensions Parker Hannifin Corporation

23 Safety Switches Switch 3 Rotates to allow entry at all 4 side positions. Safety Switch Mounting Bracket 3 [23-110] Design Tip - Adding an extra horizontal beam in the middle of the frameorusinga40x80 provides you an extra slot for mounting safety switches. Safety Switch Mounting Bracket 3 [23-110] #10-32 x 5/8" BHCS [ ] and #10-32 T-Nut [25-009] #10-32 x 3/8" BHCS [ ] 1/4-20 x 5/8" BHCS and 1/4 T-Nut Safety Switch 3 [ or ] #10-32 x 1 1/2" BHCS [ ] 1.57" 1.65" 1.38" 1.22" 0.91" Slotted for up and down adjustment. Slotted for side to side adjustment. 1.85" 7.72" 5.67" 0.46" Ø0.22" 1.18" *Key dimensions same as / on previous page This safety switch has a very high locking force yet is compact with a narrow profile. It has a rotatable head to allow key entry from all positions while still meeting NEMA 6 code. Switching Ability AC: 230V, 6A DC: 24V, 6A Auxiliary Contacts: 2 N/O Solenoid Supply Voltage*: 110VAC Minimum Current: 10mA at 24V Protection: IP67 (NEMA 6) Conforms to: EN1088, EN292, UL and C-UL Listed *24VAC/DC available as special order. 1.18" 8.25" 5.67" Ø0.28" 9.00" #10-32 Actuator Screws (2) #10-32 x 3/8" BHCS [ ] & (2) #10-32 x 1 1/2" BHCS [ ] T-Nuts (2) Any #10-32 [25-009] Bracket [23-110] Screws (2) 1/4-20 x 5/8" BHCS & (2) #10-32 x 5/8" BHCS [ ] T-Nuts (2) 1/4 T-nut & (2) #10-32 T-nut [25-009] 1.09" 1.10" " #10-32 Ø0.22" 0.25" Safety Switch 3 (2 N/C) Power to Lock Each 18 oz Safety Switch 3 (2 N/C) Power to Unlock Each 18 oz Safety Switch Mounting Bracket 3 Each 2 oz Parker Hannifin Corporation

24 Notes Handles, Hinges & Switches 75 Parker Hannifin Corporation

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

TSLOTS Hardware 06:02

TSLOTS Hardware 06:02 06 TSLOTS HARDWARE This section includes everything you need to build panels and doors for guarding, bi-fold doors, sliding doors or enclosures. If you need something to complete a project and we don't

More information

Call for Availability

Call for Availability A-100 A-101 13/16" 2-11/16" A-100 (Left hand) A-101 (Right hand) (Anodized aluminum) Contents: 1 inside pull; 1 strike; Left Hand Shown 2-5/8" Description: Surface-mount; used by many manufacturers. You

More information

Black Sand Bronze We are a creative team based in New Zealand, we have been designing and making things for over 20 years, from the small scale of gold smithing to large civic projects, our passion is

More information

Overhead Holders & Stops

Overhead Holders & Stops Manufacturing, Inc. Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless

More information

TS93 EMR T/PT/TDE. Surface applied door closer

TS93 EMR T/PT/TDE. Surface applied door closer TS EMR T/PT/TDE Surface applied door closer Installation instructions: Pull side track mount door closer with smoke detector (EMR T) Push side track mount door closer with smoke detector (EMR PT) Double

More information

Premier & Deluxe 3-Season Room Sliding Glass Door

Premier & Deluxe 3-Season Room Sliding Glass Door DTSSGD-11 Premier & Deluxe 3-Season Room Sliding Glass Door Installation Instructions Screen Door Seal Left Side Track Top Track Assembly Right Side Track Right Side Trim Sliding Glass Door Sliding Screen

More information

Guide rail bracket (for adjustable heads)

Guide rail bracket (for adjustable heads) (for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,

More information

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041

1036 Parkway Ct. Phone: 770-932-0202 Buford, GA 30518 Fax: 770-945-0041 CONSTRUCTION 1. A. GENERAL 1.A.1. The intent of this specification is to set forth construction and design standards that will result in an installation of modular cabinetry requiring FLUSH OVERLAY CONSTRUCTION.

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices

KIRÁLY TRADING KFT H-1151 Budapest Mogyoród útja 12-14 tel: 061307-3801 Email_pzoli@kiralytrading.hu. Clamps Clamping devices 04000 Clamps Clamping devices 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 297 04010 Adjustable straps Tempered steel 1.1191 Black oxide finish nlm 04010-101 Suitable thrust

More information

SECTION 6. Glass Storefront Doors:

SECTION 6. Glass Storefront Doors: SECTION 6 Glass Storefront Doors: Table of Contents 3070 Storefront Door System Description & Dimensions 6070 Storefront Door System Description & Dimensions Door Leaf Detail Optional 10 Bottom Rail Detail

More information

PHA 2000 PHB 3000 EXIT PAD

PHA 2000 PHB 3000 EXIT PAD PHA 2000 PHB 000 EXIT PAD Panic Hardware in Contur Design PHA 2000 PHB 000 EXIT PAD THE MODULAR PANIC HARDWARE-SSTEM IN CONTUR DESIGN Prior knowledge of how to open the escape door is not expected. DANGER

More information

LCN 2030 SERIES FEATURES CONCEALED (IN 1 3/4 HEADER) MOUNTING. The concealed 2030 Series. PACER is a heavy duty closer. designed to fit in a narrow,

LCN 2030 SERIES FEATURES CONCEALED (IN 1 3/4 HEADER) MOUNTING. The concealed 2030 Series. PACER is a heavy duty closer. designed to fit in a narrow, CONCEALED (IN 1 3/4 HEADER) MOUNTING The concealed 2030 Series PACER is a heavy duty closer designed to fit in a narrow, minimum 1 3/4 aluminum transom. The single lever arm and roller assembly provide

More information

Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11

Cluster Box Units. (CBU s) 3300 Series CBU Door Sizes. Fully Integrated Parcel Lockers CLUSTER BOX UNITS FRONT LOADING. continued on pages 7-11 Cluster Box Units (CBU s) continued on pages 7-11 CLUSTER BOX UNITS FRONT LOADING Made of heavy duty aluminum and stainless steel hardware, Salsbury 3300 series U.S.P.S. approved Cluster Box Units (CBU

More information

Chapter 3 Assembling the Storage Ladder

Chapter 3 Assembling the Storage Ladder Chapter 3 Assembling the Storage Ladder This chapter provides step-by-step instructions for assembling and attaching the Safety Ladder to the Storage Wall. General Information The Lista Safety Ladder provides

More information

HARDWARE STANLEY ARCHITECTURAL HARDWARE

HARDWARE STANLEY ARCHITECTURAL HARDWARE HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet

More information

Cylinder Floor Bumpers with Screws. Cylinder Floor Bumpers with Dome Cap with Screws DOOR ACCESSORIES 11/2" 11/2" Cylinder Floor Bumper 1.

Cylinder Floor Bumpers with Screws. Cylinder Floor Bumpers with Dome Cap with Screws DOOR ACCESSORIES 11/2 11/2 Cylinder Floor Bumper 1. Cylinder Floor Bumpers with Screws 11/2" 2" 11/2" Cylinder Floor Bumper 2257 1.5" 2" 2" Cylinder Floor Bumper 2258 Dia. 1.170" Dia. 1.170" Cylinder Floor Bumpers with Dome Cap with Screws 11/2" Cylinder

More information

1500 Follow Spot Yoke

1500 Follow Spot Yoke = 1500 Follow Spot Yoke Rev 1.1 2004 City Theatrical, Inc. Getting Started with the City Theatrical Follow Spot Yoke Congratulations on the purchase of your City Theatrical Follow Spot Yoke. The City Theatrical

More information

SPECIAL EXTRUSIONS AND ACCESSORIES

SPECIAL EXTRUSIONS AND ACCESSORIES PROFILE SYSTEM SPECIAL EXTRUSIONS s no i s u r t xe l a i c eps SPECIAL EXTRUSIONS AND ACCESSORIES MINITEC PROFILE SYSTEM 235 PROFILE 30 X 30 Part. N 20.1068/0 - lx = 2,133 cm 4 - ly = 2,133 cm 4 - wx

More information

Installation Instructions

Installation Instructions www.idealpetproducts.com Installation Instructions Before You Get Started... It is important to read all instructions carefully and make sure you have all the parts listed below before beginning pet door

More information

CABLEVIEW RAILING INSTRUCTIONS

CABLEVIEW RAILING INSTRUCTIONS CUSTOMER SERVICE CONTACT INFO Phone: 888-686-7245(RAIL) Fax: 888-686-7245 (RAIL) Email: sales@stainlesscablerailing.com Website: www.stainlesscablerailing.com Address: 3315 NE 112 th Ave #72/73, Vancouver,

More information

*24213* 4040-SE Sentronic. 1 Voltage. 6 Adjusting Hold-Open Door Position. 7 Regulation. 2 Tracking. 3 Spring Power. 8 Door Closer Cover

*24213* 4040-SE Sentronic. 1 Voltage. 6 Adjusting Hold-Open Door Position. 7 Regulation. 2 Tracking. 3 Spring Power. 8 Door Closer Cover *223* 223 00-SE Sentronic Installation Instructions This closer features two mounting options. Before beginning, determine which type of mounting best applies to your application, or had been specified

More information

Rating when used as a weight carrying hitch without spring bars:

Rating when used as a weight carrying hitch without spring bars: BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.

More information

Mini USB and USB 2.0-IP67 Connector System

Mini USB and USB 2.0-IP67 Connector System Mini USB and USB 2.0-IP67 Connector System Section 12 Mini USB and USB 2.0-IP67 Connector System CONEC has added the Mini-USB connector. This Mini-USB IP67 receptacle and plug family, feature a bayonet

More information

Installing the Cart Garage Frame and Flush Door

Installing the Cart Garage Frame and Flush Door General Information: The following provides step-by-step instructions for assembling and installing the Automotive Cart Garage Frame and Door under a work surface. The finished assembly will consist of

More information

ULTIMA 6 SPEED LSD MANUAL #201-57, #201-58, #201-59

ULTIMA 6 SPEED LSD MANUAL #201-57, #201-58, #201-59 ULTIMA 6 SPEED LSD MANUAL #201-57, #201-58, #201-59 INDEX Exploded view page 1 Parts list pages 2-3 Torque specs page 4 Fluid requirements page 4 Assembly pages 4-6 Clutch cable install page 7 Ultima recommends

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

All-Season Sunroom Sliding Glass Door Installation Instructions

All-Season Sunroom Sliding Glass Door Installation Instructions ASRESGD-08 All-Season Sunroom Sliding Glass Door Installation Instructions Panel Frame Door Frame Left Side Foam Insulator IE241 H Bar Assembly Door Frame Top Track Panel Frame Door Frame Right Side Stationary

More information

*HINGE (pull) side mount shown

*HINGE (pull) side mount shown CLOSER MOUNTS *HINGE (PULL) SIDE TOP JAMB (PUSH SIDE) PARALLEL ARM (PUSH SIDE) Designed for maximum versatility, the 1460, available with multiple cover options, can be used for both commercial and institutional

More information

Side Winder. Woodpeckers INSTALLATION INSTRUCTIONS

Side Winder. Woodpeckers INSTALLATION INSTRUCTIONS Woodpeckers PRECISION WOODWORKING TOOLS Side Winder Router Lift. INSTALLATION INSTRUCTIONS Models: SW350 COMPATIBLE ROUTER MOTORS The Woodpeckers Side Winder 350 Router Lift fits the Porter-Cable 690/890,

More information

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No.

TRAILER EQUIPMENT. Jockey Wheels & Clamps Fully Zinc Plated. MP431 MP432 MP433 MP435 MP9743 MP810 MP9745. Code No. with clamp. Code No. Jockey Wheels & Clamps Fully Zinc Plated. with clamp with clamp 1 480mm Deluxe sliding jockey wheel with 34mm Dia tube with red 1 plastic wheel and solid rubber tyre. Max. 75Kgs 1 5 min 790mm max Deluxe

More information

Leading Manufacturer of High Quality Builders Hardware in Canada

Leading Manufacturer of High Quality Builders Hardware in Canada Leading Manufacturer of High Quality Builders Hardware in Canada Since 1978 Your Solutions to Miscellaneous and Custom Architectural Hardware. Contents Product Description Page Contents 1 Numerical Index

More information

Micro Cart User's Guide

Micro Cart User's Guide Micro Cart User's Guide To take full advantage of the ergonomic features of your new Sun Mountain Micro Cart, please read the following information. SUN MOUNTAIN 1 Your Micro Cart has several innovative

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler

Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors Jeep Wrangler Installation Instructions Complete Top Frame & Hardware With Soft Upper Doors 87-95 Jeep Wrangler IMPORTANT NOTICE: Carefully read instructions before attempting to install this product. Rampage Products

More information

Mobile / Folding Power Tool Stand

Mobile / Folding Power Tool Stand Mobile / Folding Power Tool Stand 40612 Set up and Operating Instructions Distributed exclusively by Harbor Freight Tools. 3491 Mission Oaks Blvd., Camarillo, CA 93011 Visit our website at: http://www.harborfreight.com

More information

Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul

Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Hürriyet Mah. Dr. Cemil Bengü Cad. No.27/A 34403 Çağlayan / Istanbul Tel: +9 0212 224 2392 +9 0212 225 2182 Faks:+9 0212 225 0274 Website: www.alaks.com.tr E-Mail: info@alaks.com.tr 1160F Aluminum Corner

More information

AGILE 150, RS 120 & DRS 120

AGILE 150, RS 120 & DRS 120 AGILE 150, RS 120 & DRS 120 Hardware for Manual Sliding Door Systems HARDWARE FOR MANUAL SLIDING DOOR SYSTEMS AGILE 150 RS 120 DRS 120 CONTENTS Hardware for Manual Sliding Door Systems DORMA AGILE 150

More information

ABLOY camlocks. Expertise at your service

ABLOY camlocks. Expertise at your service R ABLOY camlocks Expertise at your service 1 ABLOY EXPERTISE AT YOUR SERVICE ABLOY cam locks have been developed to meet the highest levels of security in the field of equipment locking. Our extensive

More information

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001

Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

Holder/Release Devices with Integral Door Closers DORMA EMF/ EMR

Holder/Release Devices with Integral Door Closers DORMA EMF/ EMR Holder/Release Devices with Integral Door Closers DORMA EMF/ EMR DORMA EMR Holder/Release Device with Integral Detector The DORMA EMR Series holder/release device incorporates a photoelectric detector

More information

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 OPERATION AND SERVICE INSTRUCTIONS AMPHENOL 157 SERIES TELE-PIERCE MULTI-WIRE TERMINATION TOOL 356-246 AMPHENOL TERMINATION SYSTEMS 1830

More information

F-Series Camera Mounting Accessories

F-Series Camera Mounting Accessories F-Series Camera Mounting Accessories Document Number: 427-0462-00-12 Version: 100 Issue Date: September 2010 2010. All rights reserved worldwide. FLIR Commercial Systems, Inc. 70 Castilian Drive Goleta,

More information

EMF/EMR. Holder/Release Devices with Integral Door Closers

EMF/EMR. Holder/Release Devices with Integral Door Closers EMF/EMR Holder/Release Devices with Integral Door Closers EMR TECHNICAL DETAILS DORMA EMR SERIESHOLDER/RELEASE DEVICE The DORMA EMR Series holder/ release device incorporates a photoelectric detector and

More information

NuStep TRS 4000 Parts List 1.6

NuStep TRS 4000 Parts List 1.6 NuStep TRS 4000 Parts List 1.6 Note: Most parts are available individually, but to simplify installation, ASSEMBLIES (in CAPS) only come fully assembled. Items noted as (not shown) were replaced with current

More information

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design

SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design SOHOline and SOHO Slimline The SOHOline and SOHO Slimline offer a modular, sturdy and compact design Ideal installation for; Offices Branch Offices Schools Computer Aided Classes Government Offices Hotels

More information

Type 1, 3, & 3R Enclosures

Type 1, 3, & 3R Enclosures Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................

More information

Lifetime warranty. 2 - Top Rolling Hook Guides 4-1/4 x 20 Thread 35 mm 4 - Acorn nut 1/4 x Flat head # 10 x 3/4

Lifetime warranty. 2 - Top Rolling Hook Guides 4-1/4 x 20 Thread 35 mm 4 - Acorn nut 1/4 x Flat head # 10 x 3/4 Rolling Ladder Hardware Kits Lifetime warranty Patent Pending - Exclusive Patent on Rolling Hook Top Hardware 2 - Top Roller Guides 4-1/4 x 20 Thread 35 mm 4 - Acorn nut 1/4 x 20 4 - Flat head # 10 x 3/4

More information

MR221-MR222 Heavy Duty Geared Limit Switches, CE Approved

MR221-MR222 Heavy Duty Geared Limit Switches, CE Approved MR221-MR222 Heavy Duty Geared Limit Switches, CE Approved MICRONOR automation components Product MICRONOR MR221 and MR222 series Heavy Duty Geared Limit Switches are for use in the most demanding industrial

More information

Sprinter Door Adjustment Supplement

Sprinter Door Adjustment Supplement DOOR ADJUSTMENT PROCEDURES Proper door adjustment is essential in applications with extended use of sliding door and rear cargo doors. Misadjusted doors will reduce the service life of door hinges and

More information

SOLENOID VALVES SERIES

SOLENOID VALVES SERIES CAD drawing data catalog is available. VALVES GENERAL CATALOG SOLENOID VALVES SERIES INDEX SOLENOID VALVES 010 SERIES Features 61 Basic Models and Configuration 62 Specifications 63 Solenoid Valve/Manifold

More information

DCF Optimized Rack System

DCF Optimized Rack System Integrated Cabinet Solutions For Business-Critical Continuity DCF Optimized Rack System User Manual IMPORTANT SAFETY GUIDELINES SAVE THESE INSTRUCTIONS This manual contains important instructions that

More information

Linear Incline Hook- on Shelves

Linear Incline Hook- on Shelves Linear Incline Hook- on Shelves Tools Required -Plastic Mallet -Phillips head screwdriver -Flat blade screwdriver 1. Assemble the Front Stop to the shelf, using the #10AB x 1-3/4 phillips pan head thread

More information

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB

SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB

More information

Sliding and Folding Door Fittings Sliding Door Accessories

Sliding and Folding Door Fittings Sliding Door Accessories Sliding door lock Toplock For 1- and 2-leaf sliding doors Suitable for toughened safty glass and laminated sheet glass Suitable for DIN left and DIN right Max. weight per door leaf 120 kg For glass thickness:

More information

STEEL-RITE II or III COMMERCIAL SECTIONAL DOOR Owner s Manual Supplement Model 52242 NOTICE TO USER

STEEL-RITE II or III COMMERCIAL SECTIONAL DOOR Owner s Manual Supplement Model 52242 NOTICE TO USER STEEL-RITE II or III COMMERCIAL SECTIONAL DOOR Owner s Manual Supplement Model 52242 NOTICE TO USER Thank you for purchasing the Steel-Rite II or III, model 52242 commercial sectional door from RITE-HITE

More information

HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS

HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS ELECTRICAL SAFETY CONTROLS HOW TO ORDER SAFETY PRODUCTS/SAFETY CONTROL SYSTEMS PNEUMATIC SAFETY CONTROLS BASIC CONTROLS SC3000 - SELF CONTAINED 2 HAND CONTROL - STAND ALONE MODEL SC3300 - SELF CONTAINED 2 HAND CONTROL - PRESS READY

More information

Small Flat Panel Lift Arm FSA-1004 and KSA-1004

Small Flat Panel Lift Arm FSA-1004 and KSA-1004 I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows

More information

Type 4 Panel Enclosures

Type 4 Panel Enclosures Panels Premier panels can be installed in any Premier Series enclosure and are up to 20% larger than standard NEMA panels. Panels above 24 are flanged. Steel panels have a white polyester powder paint

More information

Vertical Break Parallel (VBP) / Vertical Break Slant (VBS)

Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) August, 2009 Vertical Break Parallel (VBP) / Vertical Break Slant (VBS) Type VBPA (Aluminum) / Type VBPC (Copper) Type VBSA (Aluminum) / Type VBSC (Copper) PASCOR Air Break Switch Technology PASCOR offers

More information

YTE Suspension. Installation & Maintenance

YTE Suspension. Installation & Maintenance YTE Suspension Installation & Maintenance For Your Trailer Axle Suspension Needs Call York : Head Office Singapore YTESuspguide.RevC.May2008 York Transport Equipment (Asia) Pte. Ltd. No. 5 Tuas Avenue

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

MEC Auto-Mate Assembly Manual. For MEC 9000G/GN and 8567 Grabber Series

MEC Auto-Mate Assembly Manual. For MEC 9000G/GN and 8567 Grabber Series MEC Auto-Mate Assembly Manual For MEC 9000G/GN and 8567 Grabber Series Thank you We really appreciate your support of our product line. But our commitment to you hardly ends here. We won't be satisfied

More information

INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10

INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10 VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data

More information

Section M POWER LIFTS

Section M POWER LIFTS Section M POWER LIFTS January 2003 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010

More information

Pushbutton Access and Release Devices 620 Series Heavy Duty Pushbuttons 631 Extreme Duty Pushbuttons

Pushbutton Access and Release Devices 620 Series Heavy Duty Pushbuttons 631 Extreme Duty Pushbuttons Access and Release Devices 620 Series Heavy Duty s 631 Extreme Duty s Heavy Duty Plate Backlit Illumination of Cone 623 625 Schlage Locknetics 620 and 631 Series s offer significant installer friendly

More information

Installation Guide FLT/FLH ROAD KING. 38 Sport Trike Kit All Years

Installation Guide FLT/FLH ROAD KING. 38 Sport Trike Kit All Years Installation Guide FLT/FLH ROAD KING 38 Sport Trike Kit All Years INCLUDED IN YOUR TRIKE KIT: COMPONENTS Frankenstein Trikes Rear End Swing Arm 2 Long Fl Style fenders FL style fender bracket 10 lug nuts

More information

INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End

INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End INSTALLATION INSTRUCTIONS 67-72 CHEVY C-10 4-Link Rear End Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating to ensure proper

More information

Roll-Up Door Maintenance Guide

Roll-Up Door Maintenance Guide R Roll-Up Door Maintenance Guide Cable Replacement on Two Spring Type Balancer Page 1 Panel Replacement - Removable Roller Cover Type Bottom Panel Page 1 Panel Replacement - Removable Roller Cover Type

More information

Laserlyte-Flex Alignment System

Laserlyte-Flex Alignment System Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning

More information

Chevy SuperRail Mounting Kit #3345

Chevy SuperRail Mounting Kit #3345 Chevy SuperRail Mounting Kit #3345 #4100 SuperGlide (16K) #4400 SuperGlide (18K) Gross Trailer Weight (Maximum) Vertical Load Weight (Max. Pin Weight) 16,000 lbs. 4,000 lbs. Gross Trailer Weight (Maximum)

More information

City of San Diego, CWP Guidelines

City of San Diego, CWP Guidelines PART 1 -- GENERAL SECTION 08520-1.1 WORK OF THIS SECTION City of San Diego, CWP Guidelines A. The WORK of this Section includes providing aluminum windows with frames, bracing, glazing attachments, screens,

More information

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.

More information

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS

PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS SYSTEM COMPONENTS PREASSEMBLED ELEMENTS FOR FIFTING AND SLIDING DOORS s r ood gn i d i l s dna gn i t f i f r o f s t neme l e de l bme s s ae r P PREASSEMBLED ELEMENTS FOR LIFTING AND SLIDING DOORS These

More information

Type 4708 Supply Pressure Regulator

Type 4708 Supply Pressure Regulator Type 478 Pressure Regulator Application pressure regulator used to provide pneumatic measuring and control equipment with a constant air supply Set point ranges. to.6 bar ( to 4 psi) or. to 6 bar (8 to

More information

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS

BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS BUILT-IN DISHWASHER INSTALLATION INSTRUCTIONS PLEASE READ COMPLETE INSTRUCTIONS BEFORE YOU BEGIN LEAVE INSTALLATION INSTRUCTIONS AND USER'S GUIDE WITH OWNER ALL ELECTRIC WIRING AND PLUMBING MUST BE DONE

More information

MARINE WIRING DEVICES Pin and Sleeve Type

MARINE WIRING DEVICES Pin and Sleeve Type MARINE WIRING DEVICES Pin and Sleeve Type ProConnect-PS Plug & Receptacle XPFConnect-PS Explosionproof Plug & Receptacles 263/264/mw - Pg. 436 EP/EPCS/mw - Pg. 456 261/262/mw - Pg. 440 WELD/mw - Pg. 444

More information

TECTUS Concealed Hinges

TECTUS Concealed Hinges Concealed Hinges index TE 240 3d up to 40 kg (88 lbs) 6 TE 340 3d up to 80 kg (176 lbs) 7 TE 525 3d up to 120 kg (264 lbs) 8 TE 526 3d up to 120 kg (264 lbs) 9 TE 527 3d up to 120 kg (264 lbs) 10 TE 540

More information

TECHNICAL INFORMATION Models No. Description

TECHNICAL INFORMATION Models No. Description TECHNICAL INFORMATION Models No. Description HP2070, HP2070F, HP2071, HP2071F 20mm (3/4") 2-Speed Hammer Drill CONCEPT AND MAIN APPLICATIONS L W NEW TOOL P 1 /13 W L These hammer drills have been developed

More information

www.hammondmfg.com General Accessories Hardware

www.hammondmfg.com General Accessories Hardware Heavy Duty Door Clamping Junction Box Padlock Kit Quick Release Clamp Replacement hardware for use on all 1418 and 1447 Series enclosures. Formed heavy gauge stainless steel clamp with stainless steel

More information

Di-Acro Hand Operated #12 & #18 Turret Punch Press

Di-Acro Hand Operated #12 & #18 Turret Punch Press OPERATOR S MANUAL & INSTRUCTIONS Di-Acro Hand Operated #12 & #18 Turret Punch Press Di-Acro, Incorporated PO Box 900 Canton, Ohio 11 1 Progress Street N.E. Canton, Ohio 0 0--192 0--0220 (fax) Revised 0/02

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179

More information

DIAMOND Retractable Rodding Robot Model SPRAYROD-R

DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 1 (23) DIAMOND Retractable Rodding Robot Model SPRAYROD-R 2004-12-21 2 2 (23) Table of contents 1 TECHNICAL DESCRIPTION...4 1.1 MAIN DETAILS...5 1.2 COMPONENTS DESCRIPTION...5 1.2.1 Pneumatic

More information

Lincoln Mark VII Power Window Motor Repair

Lincoln Mark VII Power Window Motor Repair Lincoln Mark VII Power Window Motor Repair Is your door no longer going up and down? Does the window motor make a horrible sound when in use? Does your window no longer work at all? You may need to replace

More information

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007

Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 Polaris Slingshot Trailer Hitch Installation Instructions #PSS007 1. Lay out and familiarize yourself with the components and hardware supplied with the hitch. Note the included trailer wiring isolator

More information

OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80

OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 OWNER S/OPERATOR S - PARTS MANUAL CEMENT MIXER MODEL MX-80 Read the Operator s Manual entirely. When you see this symbol, be aware that the subsequent instructions and warnings are serious - follow without

More information

IT-SOLUTIONS.

IT-SOLUTIONS. IT-SOLUTIONS Well conceived Haewa Group has gained a strong profile as an innovative and competent supplier for the machinery, systems, electrical and electronic industries, well beyond European geographic

More information

Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS

Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS Rittal s Comprehensive Family Of... NETWORK RACK SOLUTIONS STANDARD & ECONOMICAL BasicRack A complete low-cost, high-quality basic equipment management system. Design Six web channel holes per side allow

More information

Section M POWER LIFTS

Section M POWER LIFTS Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010

More information

Lighting Packages. 230 VAC Fluorescent Enclosure Light:

Lighting Packages. 230 VAC Fluorescent Enclosure Light: Spec-00581 H763.422.2211 763.422.2600 Electrical Lighting Packages Electrical Lighting Packages PANELITE Enclosure Lights Overview FEATURES Slim profile allows light to be tucked up out of the way for

More information

The baying system PS 4000

The baying system PS 4000 The baying system PS 000 The baying system PS 000 Design and technology customised to meet your needs Top quality and economy characterise the PS system. The profile is one of the core features of our

More information

WE-350 Series ¼ Turn Electric Actuator

WE-350 Series ¼ Turn Electric Actuator WE-350 Series ¼ Turn Electric Actuator Operation and Installation Manual Pg 1 (Rev. 020113) Table of Contents 1.0 General 1.1 Pre-Installation Inspection 1.2 Storage 1.3 Features & General Information

More information

Model 43AP Pneumatic Controller, Style B

Model 43AP Pneumatic Controller, Style B Instruction MI 011-476 January 1980 Model 43AP Pneumatic Controller, Style B Installation and Operation Model 43AP Controller continuously detects the difference between a process measurement and its set

More information

Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005

Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005 Hinge Replacement & Hinge and Hardware Adjustment Guide for Andersen Frenchwood Hinged Patio Doors Manufactured Before November 2005 For ease of installation and continued enjoyment of your Andersen product,

More information

Pneumatic Applications

Pneumatic Applications Pneumatic s 800-333-493 Pneumatic Control System with separate installation of cables and hoses with conduits 80x40. 15 Pneumatic Profiles 800-333-493 Profiles can be used as support structure and compressed-air

More information

Rack installation instructions

Rack installation instructions Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:

More information

ENTRANCES AND FRAMES INSTALLATION MANUAL

ENTRANCES AND FRAMES INSTALLATION MANUAL ENTRANCES AND FRAMES INSTALLATION MANUAL 11/18/13 Tubelite Inc. 0 of 31 11/18/13 Tubelite Inc. 1 of 31 INSTALLATION NOTES Allow 1/4" minimum shim and sealant space at sides and top of door frame. Door

More information