A range of hinges specially designed for weld fixing and which are suitable for steel doors, grilles, security cabinets and more.
|
|
- Eleanore Moody
- 6 years ago
- Views:
Transcription
1 range of hinges specially designed for weld fiing and which are suitable for steel doors, grilles, security cabinets and more. Welding Hinges
2 Welding hinges 60mm 80mm 100mm 140mm 180mm Universal hinges These two part lift off hinges are available in nine sizes from 45mm to 200mm and can be used on doors of either hand. The tear-drop knuckle profiles are machined from hot rolled easy weld steel sections and are fitted with a fied steel pin. ll sizes are complete with a brass washer but as an alternative, a limited range can be fitted with a ball bearing washer. Five sizes are also available in stainless steel. (Grade 304L) Note: all bearing washer increases overall height by 4mm appro. all bearing washers are recommended for heavy duty doors and doors which are in constant use. The bearing assembly consists of 2 hardened steel cones in a steel case. Height mm ross Section mm Pin ø mm Steel with brass washer all bearing Grease nipple ll stainless steel
3 spring hinge 551/257 Ø Ø ode ø simple and economical system for single action, self-closing, steel doors. oth the spring unit and hinges are weld fied to the door and frame. The spring unit has an adjustable strength spring whilst the hinges have brass pins and ball bearing washer. Two hardware kits are available: For doors up to 60kg/1000mm wide Kit 551/60/257 consisting of 1 spring unit and 2 hinges. For doors up to 100kg/1200mm wide Kit 551/100/257 consisting of 2 spring units and 2 hinges. The hardware can be fitted to doors of either hand. Hinge No. 257 ll dimensions in millimeters Kit 551/100/ kg 1200 Hinge fiing guide 60kg 1000 Spring unit No. 551 = 100 Kit 551/60/ =
4 Oil cap flag hinge These two part lift-off hinges are available in eight sizes and because the flag plates are not offset they can be fitted to doors of either hand. The mild steel flag plates are electrically welded to the round, steel knuckle which is fitted with a steel pin. ll sizes are complete with a brass washer but as an alternative a limited range can be fitted with a ball bearing washer. ll sizes incorporate an oiling hole and cap. Size mm Plate size mm Plate thickness mm Knuckle ø mm Pin ø mm Steel with brass washer all bearing F FLG Hinge 1150RR E F ø22 ø14 heavy duty lift-off hinge with offset flags. The hinge parts are machined from a hot rolled mild steel profile and supplied unplated for either welding or bolt fiing. The adjustable 14mm ø zinc plated steel pin is fitted with a ball bearing washer. s these hinges are handed - please specify when ordering. Left hand Right hand E
5 Industrial hinges range of hinges designed for sheet metal and other types of steel door and fabrication. Noramlly fiing is by welding but bolt fiing is an alternative for certain hinges. ll hinges are manufactured from steel, they are ungalvanized and hinge parts are undrilled. ackflap hinge 579 ouble welded plates and brass pin 50mm 45mm 5mm 50mm 90mm 7mm 75mm 90mm 9mm 75mm 140mm 10mm tee hinge 580 Welded knuckle 115mm 55mm 195mm 55mm security butt hinge 899 ouble pressed plates with security pins 100mm 30mm 4mm butt hinge 1838T ranked plates 50mm 15mm 1.2mm 75mm 20mm 1.5mm 100mm 23mm 1.8mm butt hinge 5050T Uncranked plates 50mm 15mm 1.2mm 75mm 20mm 1.5mm 100mm 23mm 1.8mm 150mm 32mm 2mm butt hinge 451T ranked plates butt hinge 899T Uncranked, double pressed plates butt hinge 575 Uncranked, double welded plates 100mm 30mm 3mm 100mm 30mm 4mm 150mm 40mm 7mm 100mm 40mm 6mm 150mm 65mm 6mm
6 flag hinge 220/280 Size mm Plate size mm Plate thickness mm Knuckle ø mm Pin ø mm Three flag hinge: These are specially designed for heavy steel doors. The large diameter steel pin is removable to make the door easier to hang. They are supplied with special ball bearing washers. Made to order only, in mild steel. This is not a stock item. W ss flag hinge Size mm Plate size E mm Plate thickness mm 5 5 Knuckle ø mm Pin ø mm 9 12 Stainless steel two flag hinge: These hinges are fabricated in stainless steel (grade 304) with the flags electronically welded to the round profile knuckle. They are fitted with a fied stainless steel pin and washer. STMPE HINGE Length: 105mm Plate size: 10mm 47mm Material thickness: 4mm Knuckle diameter: 28mm Pin diameter: 19.8mm Pin Stamped Hinge with Etractable Pin and brass washer. arrier omponents Ltd, Unit 8, olphin Way, olphin Point, Purfleet, Esse RM19 1NR tel fa free fa order hotline sales@barrier-components.co.uk
Cabinet & Drawer Hardware
www.crh.com.au SOLUTIONS FOR TRDE Cabinet & Drawer Hardware www.crh.com.au SOLUTIONS FOR TRDE CONTENTS Page 3 Page 4 5 Page 6 8 Page 9 10 Page 11 12 Page 13 14 Page 15 Page 16 18 Page 19 Page 20 CRH Series
More informationSECTION 3: Cable Ladder
SECTION 3: Cable Ladder Cable Ladder Type 2/30 2/30 Fittings Cable Ladder Type 3/50 (NEMA 16A) 3/50 Fittings > 3:3 Cable Ladder Type 4/70L (NEMA 20B) > 3:4-3:6 Cable Ladder Type 4/70 (NEMA 20B) HEAVY DUTY
More informationHigh performance hinges
High performance hinges UNION Architectural Hardware introduces a new range of high performance door hinges - UNION PowerLOAD. Tested to BS EN 195:2002 and CE marked, the new UNION hinges have also been
More informationLift-off hinge. Rising hinge. Standard hinge. Heavy duty hinge. Parliament hinge. Spring hinge. Double action spring hinge. Concealed mortise hinge...
Door Hinges Contents Butt hinges Lift-off hinge Rising hinge Standard hinge Heavy duty hinge Parliament hinge Spring hinge Double action spring hinge Concealed hinges Concealed mortise hinge... Pivot
More informationRollers. from the UK s largest roller manufacturer. Quality Performance Reliability
Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers
More informationGEET Fuel Processor Plans
GEET Fuel Processor Plans This is a greatly simplified Proof of Concept version of the GEET Fuel Processor that just about anyone can build from parts from a local Hardware store in a weekend for very
More informationBALL TRANSFER UNITS. multi-directional handling solutions.
LL TRNSFER UNITS multi-directional handling solutions www.ball-units.com 4 3 2 all Transfer Units Index T Range 3 T Range 4 T Range T Range 6 Fabricated all Tables 7 ir argo astors 7 all Transfer Units
More informationExclusive Glass Door Hardware by Izerwaren.Com
Exclusive Glass Door Hardware by Izerwaren.Com CHROME PLATED BRASS GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Glass Door /
More informationBZP Tensile Class 8 Stainless Steel A2 Height (m) in mm A/F (sw) in mm Art. No.
Hexagon Nuts Full nut with metric coarse thread. Available in the following materials: Steel, Bright Zinc Plated. Din 934-8 Steel, Self Colour. Din 934-10. Stainless Steel; A2-70. Din 934. Also available
More informationHARDWARE. Drawer and Cabinet. The following pages offer a comprehensive selection of: Drawer and Cabinet Hardware R2-1 R-7125
R-7125 CCR-7125 The following pages offer a comprehensive selection of: Drawer and Cabinet HARDWARE R-7133 22- Track Length 1-3/16" R-7126 R-7125 CCR-7125 (30 per display box) Rolled Edge Drawer Track
More information2015 CATALOGUE Industrial Products and Price List
McGowan Fence & Supply Limited 811 Progress Avenue Scarborough, Ontario M1H 2X4 Tel (416)431-5556 Fax (416)431-2595 2015 CATALOGUE Industrial Products and Price List QUALITY and Service Since 1948 TERMS
More informationOverhead Holders & Stops
Manufacturing, Inc. Hospital Push/Pull Latches Electro-Magnetic Door Holders Electrical Power Transfer Products Aluminum Continuous Geared Hinges Stainless Steel Continuous Pin & Barrel Hinges Stainless
More informationSports and High Mast Lighting Poles Phone: (866) 474-7200 Fax: (817) 924-7049
Sports and High Mast Lighting Poles 4 High Mast Lighting Poles General American LitePole offers a raising and lowering system that allows for ease of maintaining the lighting system at ground level. Ideal
More informationCONCEALED BEARING HINGES. StANLEy ARCHItECtuRAL HARDwARE
CONCEALED BEARING HINGES StANLEy ARCHItECtuRAL HARDwARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Table of contents...2 Company history...2 5 knuckle concealed bearing design...3 Full mortise
More informationExclusive Glass Door Hardware by Izerwaren.Com
Exclusive Glass Door Hardware by Izerwaren.Com BRASS PLATED GLASS DOOR LATCHES for 3/8 to 1/2 inch thick glass 316 STAINLESS STEEL GLASS DOOR HINGES for 3/8 to 1/2 inch thick glass Wall to glass hinge
More informationCut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability
Your Local Independent Supplier Serving the Construction Industry Cut & Bent Bar Reinforcement Mesh Fabric Stockholders Reinforcement Accessories Express Valued Service Quality & Reliability 911001 LIVERSEDGE
More informationStainless Steel Pipe and Flanges
Stainless Steel Pipe and Flanges Stainless Steel 4 Pipe and Flanges Photography courtesy of Outokumpu, Arcelor, Atlas Steels and New Zealand Tube Mills. Stainless steel pipe and fittings A stainless steel
More informationGate Hardware. Hinges. Gudgeons. Latches. Catches. Locks. Wheels. Tracks. Stops. Hardware Sets
Gate Hardware Hinges Gudgeons Latches Catches Locks Wheels Tracks Stops Hardware Sets Phone 0800 428 379 Email enquiries@heritagegates.co.nz Fax 06 344 6793 Hinge Straps H101G 250x50x20mm Hinge Strap Galvanised
More informationRoberts Engineering Ltd C&R Equipment Ltd Product information 2013
Roberts Engineering Ltd C&R Equipment Ltd Product information 2013 Heavy Duty Cargo Blocks Manufactured in accordance with: B.S. 4018: 1966 A.S. B298-1871 Special Features: Tested and Certified with easy
More informationSeries # Flanged Cast Steel Gate Valve Features
Series 35114 150# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 35114 150# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided integrated
More information316 Stainless steel Cabinet and Drawer Pulls Page 1-15
SS PS 316 Stainless steel Cabinet and Drawer Pulls Page 1-15 316 Stainless steel pulls with Specify finish: LTF Life Time Finish Gold col LTF Life Time Finish Brass col (LTF limited available) Cabinet
More informationHinges & Catches. Catches. Cushions & Liners
Hinges & Catches Concealed Hinges Face Frame Hinges Non-Formed Hinges Single-Formed Hinges Two-Formed Hinges Three Formed Hinges Five-Formed Hinges Cylinder Hinges Drop Front Hinges Butt Hinges Cylinder
More informationSECTION 1 TV LIFTS AND ENTERTAINMENT HARDWARE
SECTION 1 TV LIFTS AND ENTERTAINMENT HARDWARE FLAT SCREEN TV LIFT Rack & Pinion design with unique patent pending stability system Uses German Bosch motor for reliable & quiet operation Requires only 2-3/4
More informationPDQ HINGE SUGGESTED ARCHITECTURAL SPECIFICATIONS METICULOUSLY MANUFACTURED, THE PDQ HINGE IS AVAILABLE IN 3 BASE METALS: SPECIFICATIONS HINGE SERIES
Commercial Hinges PDQ HINGES PDQ wants to be your total one source supplier of contract hardware materials. The introduction of a high quality PDQ hinge is another step in this direction. PDQ hinges are
More informationDoor Gear - Mild Steel. Product Catalogue. Version: 02 / Web:
Door Gear - Mild Steel Product Catalogue www.bloxwichtc.co.uk Version: 02 / 2016 1 Contents Welcome To the latest Bloxwich Truck & Container Ltd product catalogue, as part of the Bloxwich Group of companies
More informationSHELVING SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE.
SHELVING ACCESSORIES TROLLEYS HARDWARE BARWARE KITCHEN EQUIPMENT HOSPITALITY FURNITURE M-SPAN Shelving The all new M-Span shelf is designed to be easy to clean and last a lifetime for an affordable price.
More informationQuarry & Recycling Products
Quarry & Recycling Products CONTENTS Woven mesh screens Perforated screen plates Rubber & Polyurethane screens Walkways & Steps Ordering Information Further Information PAGE 3 6 8 9 10 11 Graepel has a
More informationGas Distribution and Transportation
Piping System Includes: Pipe Fittings (e.g. elbows, reducers, branch connections, etc.) Flanges, gaskets, bolting Valves Associations involved in generating Codes for piping Design Engineering: ASME ANSI
More informationInstallation Instructions for Wall & Frame Mounted Overhead Cabinets
Installation Instructions for Wall & Frame Mounted Overhead Cabinets CAUTION MAKE SURE THE WALL MEETS THE LOAD CAPACITY REQUIREMENTS FOR THE OVERHEAD CABINET BEING INSTALLED. REFER TO LOCAL BUILDING CODES
More informationTARIFF CODE and updates standard
TARIFF CODE and updates standard No HS CODE AHTN CODE PRODUCT DESCRIPTION PRODUCT TYPE STANDARDS IDENTIFIED 7207 Semi finished products of iron or non alloy steel Containing by weight less than 0.25% of
More informationGuide rail bracket (for adjustable heads)
(for adjustable heads) Part. 209 40 ø,5 ø10,5 2 2,5 115 15 42 5 11 37 72 4 70 Code 209 / 0754 MATERIALS: Bracket made out of reinforced polyamide black colour. FEATURES: To be used with heads Part.221,
More informationSTORAGE REQUIREMENTS FOR LICENSED FIREARM DEALERS
STORAGE REQUIREMENTS FOR LICENSED FIREARM DEALERS The following, relating to minimum standards of security for Licensed Firearm Dealers, was as a result of an agreement between the Victorian Firearms Traders
More informationHOSE, TUBE, AND PIPE CLAMPS
HOSE, TUBE, AND PIPE CLAMPS HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions 5 Heavy Duty Clamps
More informationHARDWARE STANLEY ARCHITECTURAL HARDWARE
HARDWARE STANLEY ARCHITECTURAL HARDWARE STANLEY ARCHITECTURAL HARDWARE TABLE OF CONTENTS Page Company history...2 Wardrobe pivots...3, 4 Cabinet hinges... Cabinet pulls..., 6 Cabinet knobs...6 Cabinet
More informationMANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS
MANUFACTURERS OF STUD BOLTS, THREADED RODS, ANCHOR BOLTS, HEX BOLTS, SOCKET SCREWS, HEX NUTS & WASHERS PRODUCT DESCRIPTION STANDARD / SIZE MATERIAL/ THREAD TYPE RANGE GRADE/FINISH Full Threaded Hexagon
More informationM-Span Shelving. Shelf Sizes: Shelf Widths of 300mm, 450mm and 600mm. Shelf Lengths of 600, 750, 900, 1050, 1200, 1350 and 1500mm
SHELVING M-Span Shelving The all new M-Span shelf is designed to last a lifetime for an affordable price. Made by over moulding a sub frame with Food Grade Polypropylene to produce a strong shelf in one
More informationBrass Cabinet Hinges
Brass Cabinet Hinges b 1 SOLID EXTRUDED BRASS NARROW LOOSE PIN HINGES Item Length Width No. of Joint Open Thickness Knuckles 1025 2.5 (64mm) 2 (49mm).093 (2.35mm) 3 1026 3 (76mm) 2.5 (64mm).093 (2.35mm)
More informationHinges CLAMP-ON HINGE
CLAMP-ON HINGE Post Gate Qty. Per PRICE EACH Kit# Item# Size Frame Size Sack Less Sack Sack A1 91000 1 1 25 6.97 5.81 A2 91001 1 1/2 1 25 6.97 5.81 A3 91002 2 1 25 7.33 6.11 A4 91003 2 1/2 1 25 7.33 6.11
More informationAluminum Access Ladders
O'Keeffe's The Ladder Leader Aluminum Access Ladders Manufacturing interior and exterior aluminum access, caged, and ship ladders since 1939. Access SPECIFYING AN O KEEFFE S LADDER Questions? Call us at
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationFasteners And Products Catalogue. Striving To make your day easier Our quality and customer service is paramount
Fasteners And Products Catalogue Striving To make your day easier Our quality and customer service is paramount About Us Mission Statement Fastener Center a Division Production Components Inc is dedicated
More informationK15.13 FACE FIXED DOOR HINGES K15 DOORS
K15 DOORS K15.13 01.07.2015 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. General... K15.13.03 2. 2-part hinge...
More information200
200 www.bottltd.co.uk www.bottltd.co.uk Cupboard Features & Benefits Page 202 All the details that make bott the best value range available. Shelf Cupboards Page 204 Shelved with lockable steel doors.
More informationPOWERS Controls. Technical Instructions Document No P25 AP March 5, No. 6 Pneumatic Damper Actuator.
POWERS Controls No. 6 Pneumatic Damper Actuator Technical Instructions AP 331-3 Description 331-2793 Actuator 331-2857 Actuator 331-3012 Extended Shaft and Frame with Clevis and Pin Mounting The POWERS
More informationJustor Spring Hinges by Bellevue
Justor Spring Hinges by Bellevue Single Action Double Action Light Single Action Welding Hinges Retaining Brakes 14 New Models Including 16 Marine Grade Automatically closing a door has never looked so
More informationPIPE ALIGNMENT CLAMPS
PIPE ALIGNMENT CLAMPS e-z FIT RED Pipe welding clamp 1-12.75 o/d Quick and E-Z to use Combines accuracy with safety Instant centring A quality product at low cost Wing bolts with stainless steel bearings
More informationMytec 01. Roller Blind. Mytec 01
Roller Blind Two operational systems are available: the chain drive system with a spring assist mechanism and the spring drive system with a speed control mechanism. Chain drive systems can be operated
More informationTSLOTS Hardware 06:02
06 TSLOTS HARDWARE This section includes everything you need to build panels and doors for guarding, bi-fold doors, sliding doors or enclosures. If you need something to complete a project and we don't
More informationCONTENTS CATALOGUE 6 TRAILER SUSPENSION PARTS. (Equalisers & Parts)
TRAILER SUSPENSION PARTS (Equalisers & Parts) CONTENTS EQUALISER AND RADIUS ROD SPINDLE KITS...1 DRAWBAR PIVOT KITS...1 HANGARS AND PARTS...3 LUSTY... 3 SCANIA TWIN STEER... 3 HANGAR TO EQUALISER BUSH
More informationBands. REGULAR BRACE BANDS 12 GA. x 3/4 Galvanized. REGULAR TENSION BANDS 14 GA. x 3/4 Galvanized Sack Weight Price Each
Bands REGULAR TENSION BANDS 14 GA. x 3/4 Galvanized Sack Weight Item# Qty. Less Sack Sack 1 3/8" 1 250.12 lbs..36.30 1 5/8" 2 250.14 lbs..38.32 1 7/8" 3 250.16 lbs..40.33 2 3/8" 4 250.22 lbs..42.35 2 7/8"
More informationPOWERS Controls No. 4 Pneumatic Damper Actuator
POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000
More informationLUND KEY CABINETS & KEY ID SYSTEMS
LUND Banks Rental Facilities Hotels Motels Construction Sites Correction Facilities Government Offices Universities Dorms Hospitals Nursing Homes Research Labs Maintenance Departments Realty Offices Malls
More informationTEC SOFT-CLOSE.
TEC SOFT-CLOSE TEC SOFT-CLOSE HINGE SYSTEMS A revolutionary Soft-close face frame hinge system. Established quality with functional benefits for today s modern cabinetry. www.grassusa.com The perfect solution
More informationGDP INTERNATIONAL TRADE CO.,LTD
Product Code:GDP2001 DEC:2" Black Nylon Roller 4" ZINC PLATED STEM WORKING LENGTH = 3 5/8" RATING :50-LB LOAD @ 10,000-8' DOOR CYCLES Product Code:GDP2002 DEC:2" 11 Ball Nylon Roller With Zinc Plated Stem
More informationWater Pump Prices subject to change. Cadillac V-16 Generator Coupler to Water Pump Bolt. Cadillac V-12 & V-16 Water Pump Shaft
Cadillac V-16 Generator Coupler to Water Pump Bolt $7.00 CAD-0158 1/4-20 Bolt connecting the generator coupling shaft to the generator and water pump on 1930-1931 Cadillac V- 16. Cadillac part number 892363.
More informationCommercial Security Padlocks
Commercial Security Padlocks www.locktonsecurity.com.au Introduction Commercial Security Padlocks Featuring a solid brass body with brass & stainless steel components, LOCKTON padlocks are made to be tough
More informationFASTENERS SELECTION GUIDE
FASTENERS SELECTION GUIDE Choose from our most popular range of fasteners We have over 9,000 fasteners, fixings, ironmongery and hardware products online June 2016 uk.rs-online.com (UK customers) www.rs-components.com
More informationTECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE
TECHNICAL MANUAL PIPECLAMP JULY 2013 ROHRVERBINDER ONLINESHOP.DE Selecting a Fitting fittings are a blackheart malleable casting and are manufactured to BS EN 1562 1997 for the strength requirements. fittings
More informationSTANDARD PULLEYS. Standard Pulleys
Standard Pulleys STANDARD PULLEYS The Doughty Pulley system is of modular construction, allowing easy assembly of single or multiple sheave units from a limited range of standard components. With the addition
More information- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS -
- STRONGHOLD IRON FENCE PARTS AND MATERIALS SPECIFICATIONS - PART 1.01: MATERIALS STEEL: All steel material for the fence and gate system shall conform to the requirements of ASTM A- 787 and ASTM A653
More informationSpeedframe DESIGN GUIDE
Speedframe DESIGN GUIDE WHY USE THE SPEEDFRAME SYSTEM? The most important time to get things right is when building a new home, even in the less obvious areas. Quality, reliability, performance, and economy
More informationASSORTMENTS. Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Ready To Get Organized? Imperial Drawer Assortments:
Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Overall Drawer Size 18" W x 3" H x 12" D Imperial Drawer Assortments: 1. Contain the most popular sizes and styles. 2. Each part
More informationTrailer Parts. Jockey Wheels. Tow Balls. Couplings. Jockey Wheel Parts. Coupling Locks
Trailer Parts Tow Balls 7115 1 7/8 Machined 7116 50mm Machined 7117 Long Shank 7116A Black Plastic Cover 7116B Chrome Plated Plastic Cover Jockey Wheels 7301 Telescopic 6 clamp 7302 Swivel 6 solid wheel
More informationCONTENTS DOOR HINGES FLUSH BOLT AND SURFACE BOLT DOOR STOP AND ARM STOPPER CREMONE LOCK AND ROLLER HANDLE HARDWARE FOR INSPECTION DOOR
CONTENTS DOOR HINGES FLUSH BOLT AND SURFACE BOLT DOOR STOP AND ARM STOPPER CREMONE LOCK AND ROLLER HANDLE HARDWARE FOR INSPECTION DOOR SASH ROLLER AND SLIDING DOOR CLOSER DOOR PULL AND DOOR HANDLE OTHER
More informationIt's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool
It's large enough to handle most welding job shop projects, yet small enough to make it a worth while home-workshop tool H Craft Print Project No. 272 ERE'S a metal bender that will enable you to bend
More informationSeries # Flanged Cast Steel Gate Valve Features
Series 31 10# Flanged Cast Steel Gate Valve Features SHARPE - SERIES 31 10# Flanged Cast Steel Gate Valve Full port Outside screw and yoke Bolted bonnet Flexible wedge, fully guided Integrated seats Rising
More informationType 1, 3, & 3R Enclosures
Junction oxes Type 1 Screw over....................................................................... 50-53 Junction oxes Type 1 Hinge over........................................................................
More information16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1
16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F
More informationPLAIN BEARING BUSHING DIE SETS
www.danly.com TRUSTED SOLUTIONS AND INNOVATION PLAIN BEARING BUSHING DIE SETS Quality, performance, economy Precise fit Ease of assembly www.danly.com PLAIN BEARING BUSHING DIE SETS Service We Deliver
More informationGalvanized Metal Fenders. Tread Aluminum Fenders. Plastic Fenders. Fender Brackets
Galvanized Metal Fenders Heavy duty stamped fenders are made from 16 gauge galvanized steel. Fenders can be drilled to fit a variety of mounting options. Mounting brackets not included. Wheel Size Dimensions
More informationTech Line: /5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube
Tech Line: 1-561-863-2188 5410/5415 Front Strut Frame Installation 2 x3 Box Frame Rails and 1-5/8 Round Tube These instructions are just one way of properly installing a strut front suspension. Depending
More informationANTENNA PARTS CATALOG
ANTENNA PARTS CATALOG Maco Antennas 302 S. East St. Mt. Carroll, IL 61053 www.macoantennas.net 815-244-3500 www.antennapartsoutlet.com SCREWS / BOLTS PART SIZE LENGTH DESCRIPTION PRICE S21 10-24 1/2" Machine
More informationJames M. Pleasants Company
James M. Pleasants Company SUBMITTAL DATA GAINESVILLE MECHANICAL DECEMBER 20, 2013 PROJECT: GSU: J-183 HUMANITIES LAW BLDG. QUOTE NO:12116 ENGINEER: STEVENS & WILKINSON GASKETED PLATE HEAT EXCHANGER Tag:
More informationOrganisational Kitchen Fittings Kitchen Cabinet Fittings
Pull-out wire storage basket Finish: Chrome plated Load capacity: 30 kg Installation depth: 400 mm Version: Runners and baskets separated, designed for wardrobe interiors without doors Type of pull out:
More informationFULLY FRAMELESS GLASS DIYGUIDE. Version 2
DIYGUIDE Version 2 01 site measure Planning is the first step of any successful project. We have a large range of sizes to allow for varying site requirements. Simply decide where you would like your pool
More informationFUWA K HITCH (Australia) Pty Ltd ABN SALES SPEC SHEET TURNTABLE KD. Model Number KD15E90. Vertical Load (kg)
TURNTABLE KD The FUWA K Hitch KD Turntable is a TWO-PIECE JAW design, fully fabricated from high quality steel. The KD is a non-adjustable 90mm jaw design, featuring a heavy duty double oscillating trunnion
More informationConduit Tube and Accessories
Conduit Tube and Accessories conduit tube and Accessories DETA TTE is the new brand name of market leading companies Top Tubes Electrical and Stephen Glover, both established British suppliers of conduit
More informationLighting Poles شركة المير للخدمات الفنية ذ.م.م. ALMEER TECHNICAL SERVICES CO. W.L.L. Subsidary of
Lighting Poles www.almeer.com.kw شركة المير للخدمات الفنية ذ.م.م. Subsidary of ALMEER TECHNICAL SERVICES CO. W.L.L. INTRODUCTION We stride to provide reliable, highest quality and economic solutions to
More informationCALCULATION & DRAFTING STANDARDS MANUAL PROCEDURE: C&D 515 Bill of Materials Standard REV 0.0 5/6/04
BROWN MINNEAPOLIS TANK PAGE 1 OF 7 PURPOSE: Create and Drawing Uniformity Create, explain, and establish a standard bill of materials to be placed on every drawing (except the overall tank elevation and
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationMounting instruction Emergency exit device Assa 179B
Mounting instruction Emergency exit device Assa 179B This mounting instruction is intended for installation of emergency exit device Assa 179B with following ordering numbers: 815553, 815554, 815555, 815556,
More informationMINI RAILCAR PARTS CATALOG
MINI RAILCAR PARTS CATALOG Table of Contents Adapters, Aluminum (5135, 5135AM, 5235, 5236)... 2 Adapters, Plastic (5236)... 2 Body Side Bearing Shim... 2 Body Side Bearing - Tapered... 2 Bolt, Manway Cover...
More informationFolding & Sliding Stairs
Folding & Sliding Stairs Wood Folding stairs feature 1-2 more treads than the competition. More treads means easier access. Pre-drilled installation holes, easy first step down from attic for personal
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More informationAccessories for GF and RA machines
Orbital cutting & beveling machines for high-purity process piping www.orbitalum.com Accessories for GF and RA machines A brand of ITW Orbital Cutting & Welding 23 www.orbitalum.com Orbital cutting & beveling
More informationINSTALLATION INSTRUCTIONS 65-72 F-100 4-Link Rear End
INSTALLATION INSTRUCTIONS 65-72 F-100 4-Link Rear End Please read these instructions completely before starting your installation. Assemble suspension on vehicle before powder-coating to ensure proper
More informationHAWGOOD Swing Door Hinges
DICTATOR HAWGOOD swing door hinges close swing doors fast and trouble-free, and keep them closed. They are therefore particularly suitable for doors in frequent use (eg in public buildings and industry),
More informationHAWGOOD Swing Door Hinges
DICTATOR HAWGOOD swing door hinges close swing doors fast and trouble-free, and keep them closed. They are therefore particularly suitable for doors in frequent use (eg in public buildings and industry),
More information3.0L V6 5-SPEED TRANSMISSION to cyl. 21 SPLINE GEAR DRIVEN T-CASE KIT INCLUDES: No. Part No. Qty. Ck. Box
Page: 1 of 5 KIT INCLUDES: No. Part No. Qty. Ck. Box Description 1. 240-0010 1 Adapter Plate - V6 Adapter 2. 120-0010 1 Hardware Kit - V6 Adapter 3. 100-0409 4 Bolt - 14m Hex - 10m x 1.25 x 40mm 4. 100-0401
More informationHOSE, TUBE, AND PIPE CLAMPS
hose, tube & clamp B/W pages 24/6/08 9:28 AM Page 2 HOSE, TUBE, AND PIPE CLAMPS TABLE OF CONTENTS Introduction 3 Construction 3 Application 3 Mounting 3 Standard Duty Clamps (HRL) Arrangements 4 Dimensions
More informationBS Props. BS Props BS 4 BS 3 BS 2 BS 1 BS 0
Props BS Props BS Props BS Props fully confirm to the requirements of BS 4074 : 1982 and have been tested in accordance with BS 5507 Part 3 : 1982. BS Props are manufactured from high quality material
More information422 Toll Free: (800) Phone: (718) Fax: (718) RIXSON Pivots and Pivot Sets. Exclusive Rixson Features.
Exclusive Rixson Features Economy RIXSON Pivots and Pivot Sets Vertical adjustment provides for field adjustment of the door if required. (On most models) Pivots provide longer life and more trouble-free
More informationWorking with Knobs.co
Contents Working with Knobs.co 3 Basic Hinge Types 4 H & HL Hinges 4 Strap Hinges 4 Full & Partial Wrap Hinges 5 Butt Hinges 5 Face Mount Hinges 6 Surface Mount Hinges 6 Demountable Hinges 7 Self-Mortise
More informationSPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB
SPECIFICATIONS FOR BOON EDAM TOMSED MODEL TUT-65TMB PRODUCT DESCRIPTION: BOON EDAM TOMSED MODEL TUT-65TMB STAINLESS STEEL BARCODE SCANNING ELECTRONIC REGISTERING TURNSTILE SCOPE OF OPERATION: A. The TUT-65TMB
More informationBACKSET Distance from the leading edge of the door to the centre of the keyhole or door handle.
TECH BOOK GLOSSARY ACTIVE LEAF The primary door in a pair of doors (first to open, last to close) typically has an operable handle set and is fitted with lock or latch mechanism. ARCHITECTURAL HARDWARE
More informationDOOR CONTROLS ARCHITECTURAL DOOR CONTROLS & ACCESSORIES
DOOR CONTROLS ARCHITECTURAL DOOR CONTROLS & ACCESSORIES What s inside 06 STANDARD CLOSERS 06 4000 Series 08 9000 Series 10 5000 Series 11 Superior Plus 12 E-MAGS 12 4000 Series 13 9000 Series 14 Superior
More informationGalvanized Pipe. Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available.
Galvanized Pipe Standard pipe is 16 gauge galvanized construction. Standard lengths are five feet and 20 feet. Heavier gauges are also available. Angle rings are needed to secure connections. See pages
More informationtradco hardware Door Furniture Locks, Latches & Hinges
tradco hardware Door Furniture Locks, Latches & Hinges www.tradco.com.au www.tradco.co.nz milton 200 x 50mm P68mm 0786 Latch 0786E Euro 0786P Privacy 0787 Lock 1004 Latch 1004E Euro 1004P Privacy 1005
More informationK17.11 DOOR BOLTS K17 DOORS 01.09.2013
K17 DOORS K17.11 01.09.2013 Waregemstraat 5-9870 Zulte - Belgium - T. +32 9 388 88 81 - F. +32 9 388 88 21 - commercial@sobinco.com - www.sobinco.com CONTENTS 1. Locking set series 86000...K17.11.03 2.
More informationMAD E IN THE U.S.A. 1 YE AR, 100,000 MILE W ARRANTY.
NEW CLUTCH ASSEMBLIES MAD E IN THE U.S.A. THE MOST COMPLETE LINE OF NEW CLUTCHES FOR CLASS 6, 7, AND 8 TRU CKS AVAILABLE IN THE AFTE RMARKET. MATCHED UNIT CONFIGURATIONS TO FIT YOUR NEEDS UP TO THE HIGHEST
More information