How To Create A Report For Bandwidth Utilization On An Adrem Netcrone 6.X.X (Netcrone) On A Network With A Network (Netcon) On An Ipad Or Ipad (Netcra) On Your

Transcription

1 How To Create a Report For Bandwidth Utilization AdRem NetCrunch 6.x Tutorial

2 2011 AdRem Software, Inc. This document is written by AdRem Software and represents the views and opinions of AdRem Software regarding its content, as of the date the document was issued. The information contained in this document is subject to change without notice. Any access to or use of this White Paper is conditioned on the following: The information in this White Paper is believed by AdRem Software to be accurate and reliable, but is not guaranteed. All use of and reliance on this White Paper are at the reader s sole risk. AdRem Software is not liable or responsible for any damages, losses or expenses arising from any error or omission in this White Paper. This White Paper does not constitute an endorsement, recommendation or guarantee of any of the products tested. The testing does not guarantee that there are no errors or defects in the products, or that the products will meet the reader s expectations, requirements, needs or specifications, or that they will operate without interruption. This White Paper does not imply any endorsement, sponsorship, affiliation, or verification by or with any companies mentioned in this report. This White Paper is for informational purposes only. ADREM SOFTWARE MAKES NO WARRANTS, EITHER EXPRESS OR IMPLIED, IN THIS DOCUMENT. AdRem Software encourages the reader to evaluate all products personally. AdRem Software and AdRem NetCrunch are trademarks or registered trademarks of AdRem Software in the United States and other countries. All other product and brand names are trademarks or registered trademarks of their respective owners, and no endorsement of, sponsorship of, affiliation with, or involvement in, any of the testing, this White Paper or AdRem Software is implied, nor should it be inferred. AdRem Software, Inc. 410 Park Avenue, 15th Floor New York, NY USA Phone: +1 (212) Fax: +1 (212) adrem@adremsoft.com Web site: Follow us and get the latest AdRem Software news:

3 You can benefit not only from real-time network monitoring in NetCrunch, but also use the gathered statistics for network capacity planning or migration analysis. Such reports are also great for root cause analysis while troubleshooting. Here s how you can use bandwidth utilization report to pinpoint the source of the decreased available bandwidth on some workstations connected to particular switch. 1. In the Network Atlas tree go to the map where all your switches are. If you don t have such a view already, please create one in the custom views section. Right click on the map and select Reporting -> Add Report 2. In the newly opened window (see below) enter the report name and choose an SNMP option. Click Next. 3

4 3. In the next window you can customize your report by adding or removing a column to your report (see below). 4

5 4. Click on Add icon and choose Add counter -> SNMP Performance Counters (Predefined counters) that will help us monitor bandwidth utilization on this switch: 5

6 5. For monitoring bandwidth utilization you need to select the counter in the Performance object field that is monitoring the switch s interface as shown below: 6

7 6. Consequently, select %FD Bandwidth Utilization counter and _Average instance from instances list as shown below and click on Add button. You need to click Close to confirm your selection. 7

8 7. Here you can see that the counter you have just selected has been added to the column list in your bandwidth utilization report. Click on Next 8

9 8. We recommend you adding this report to the monitoring policy of the selected map (here it is Switches custom view map). Click on OK to confirm. From now on the newly selected counter values will be collected. Do you want to schedule the bandwidth utilization report to be generated periodically? Follow these 3 steps: 9

10 In the Network Alas tree right-click on the Switches Custom Views map and choose Reporting -> Edit Map Data Collection Policy. In the newly opened window please double-click on the previously added report 10

11 Then you will see a new window where you can schedule when the report will be generated. Select the preferred option and click OK. Click OK again to close the Map Monitoring Policy Switches window The bandwidth utilization reports from this switch will help you verify bandwidth utilization in the particular period of time (e.g. during one week or one month). The information let you decide for example if you have to extend your bandwidth or increase the speed of your links. 11