High Density WLAN Testing. June Copyright 2013 Novarum Inc.

Size: px
Start display at page:

Download "High Density WLAN Testing. June 2013. Copyright 2013 Novarum Inc."

Transcription

1 High Density WLAN Testing June 2013 Copyright 2013 Novarum Inc.

2 Executive Summary Escalating Demand 1 Understanding High Density Wireless LANs 1 Key Findings 2 Test Environment The Facility 3 Infrastructure Equipment 5 Client Equipment 5 Test Network 6 Testing Methodology Tools 7 WLAN Infrastructure Configuration 8 Client Configuration 10 High-Density Testing Bi-Directional Script - All Clients, DFS Channels 11 Fixed Channel Testing Summary 15 Low Throughput Script - Third Clients 17 Max Throughput Script - Half Clients 20 Bi-Directional Script - All Clients 23 General Observations 26 Conclusions Key Findings 29 Appendix - About Novarum Copyright Novarum 2013 High-Density WLAN Testing i

3 Executive Summary This is the first in a series of high density test reports conducted by Novarum. This report documents the performance of Juniper's enterprise wireless LAN system in a high density setting. Please download the second report that includes testing of competitive products in the same environment: Novarum High Density WLAN Comparison Testing: Aruba, Cisco and Juniper. Escalating Demand The scale and density of Wi-Fi networks has dramatically changed over the last decade. Wi-Fi in the enterprise was once a convenience for laptop toting executives. Now Wi-Fi access is a required utility. Wi-Fi networks are pervasive in modern enterprises, and for many enterprises, the edge network has transitioned from wired Ethernet to entirely wireless Wi-Fi. There has been an explosion of new mobile devices smartphones and tablets in the last few years. They all include Wi-Fi and their users run applications that expect continuous internet connectivity. Enterprises are having to deal with guest access and their authorized users bringing in their personal devices to the network. Regardless of how enterprises address this BYOD trend, it will put more load on their Wi-Fi systems. At large public venues, Wi-Fi access has become a required amenity. The cellular carriers are offloading mobile data traffic onto Wi-Fi networks whenever possible, and standards work is underway that will automate this process in the future. In all levels of education from primary school through universities demand for Wi-Fi access is increasing. Most students have a Wi-Fi smartphone in addition to whatever wireless devices are required for their schoolwork. Universities now must plan for their networks to support three wireless devices per student. Many teachers are increasingly turning to using streaming video both downstream and upstream as an essential element of their pedagogical style. All of these trends combine to create the perfect storm of more devices running more demanding applications that expect wireless access anywhere. Wireless systems are being pushed to their limits and high-density Wi-Fi deployments are becoming the norm. Understanding High Density Wireless LANs It is important to understand how to configure and deploy wireless LANs to deal with these increasing demands. While the demand for wireless access continues to escalate, unlicensed wireless spectrum is limited. Enterprise Wi-Fi networks must be tuned to operate as efficiently as possible in high-density environments. Juniper Networks has built a testing capability that allows them to run their wireless LAN system in a realistic highdensity environment with a variety of Wi-Fi clients. This allows Juniper to optimize their system design for high-density deployments and validate new versions of their system in this harsh environment. Novarum was delighted to be able to work with Juniper to use this high-density testing facility to examine enterprise wireless LANs. We wanted to gain a better understanding of how these systems work under heavy load. What are the important factors that lead to good system performance in high-density networks? Do the systems utilize the available spectrum efficiently? How do the systems deal with the mixture of modern clients? Does one type of client device get better service than another? Is the system fair in its allocation of the limited resources? Does the High-Density WLAN Testing 1

4 system steer client devices to the frequency bands and access points with the most capacity? Does the system create the right low level Wi-Fi parameters to minimize transmission errors and packet retries the early warnings of a network on the edge of collapse? Novarum has discovered that seemingly small changes in how vendors choose to implement Wi-Fi and how wireless deployments are configured can have dramatic effects on network performance in the new high-density Wi-Fi world. These effects can be the difference between a mission critical network that is stable under extremely demanding load, or a network that catastrophically collapses under stress. Detailed system level features such as air time fairness, load balancing, rate adaptation, and band steering are what differentiates one enterprise Wireless LAN vendor from another. We wanted to construct test scenarios that allowed us to observe these features and their effect on system performance. For a variety of client loads and traffic patterns we measured system throughput and individual client throughput. We used packet capture and spectrum analysis tools during the tests to help document the behavior of the systems in this harsh test environment. This paper describes high-density testing of Juniper s Wireless LAN system in their facility. It describes the test environment, our testing approach, and detailed results for several test runs. Key Findings We were able to construct a repeatable test scenario with up to 302 typical Wi-Fi clients accessing an enterprise wireless LAN consisting of six dual-band n enterprise access points. Most of the tests we constructed overload the network with more traffic than is possible to deliver during the test period. This allowed us to observe the systems under high stress. The Juniper WLAN system operated in a stable fashion under very high offered load. The Juniper system delivered consistent throughput. Even under the highest load, with hundreds of clients accessing the network simultaneously, almost all of the individual clients were able to deliver modest data throughput during the tests, and no client was able to grab an unfair share of the available capacity. Juniper s Band Steering worked well. The 5 GHz capable clients consistently moved to the 5 GHz channels where there is more bandwidth available. Load Balancing worked well. On a variety of tests with different client populations, the client devices were spread evenly across the available APs. The retry rates were moderate and stayed relatively flat as we increased the number of clients participating in the tests. At maximum client load with the high throughput tests, aggregate system throughput declined compared to the peak throughput we measured. However, the retry rates were lower than we expected, and it appeared that the system would remain stable with even higher loads. When compared to competitive systems, the Juniper system delivered more aggregate throughput under heavy load. The primary factors are: better spreading of clients to match the available resources, lower error rate and lower retry rates throughout. Comparing performance of competitive systems is covered in a separate paper. High-Density WLAN Testing 2

5 Test Environment The Facility We conducted the testing in the Juniper Aspiration Dome, a conference facility in Sunnyvale, California, on the Juniper Networks campus adjacent to Moffett Federal Airfield. Figures 1 and 2 - The Aspiration Dome. The seating in the dome can be reconfigured to match the needs of specific events. For our testing the dome was configured as a large Stage auditorium. There was a grid of seats, 20 per row, in the center of the facility. We placed a single client device on each seat. The seats were numbered 1 through 20, and we used rows a through q. The client name AP1 AP4 was set to match its seat number: a1, a2, a3, etc. Every time we set up the tests, the clients were placed in the same location. AP2 Clients Clients AP5 AP3 AP6 Chariot and Monitor Machines High-Density WLAN Testing 3

6 During our testing, the permanent Juniper access points in and around the facility were disabled and we verified with our tools that there were no other Wi-Fi networks that would interfere with our testing. Figure 3 - Access Point Mounting The access points under test were mounted on temporary stands about 10 feet above floor level as shown in Figure 3. At the base of each stand we had a MacBook Pro laptop running a packet capture program that was monitoring the 5 GHz channel being used by that AP. High-Density WLAN Testing 4

7 Infrastructure Equipment The Wi-Fi infrastructure for this testing is current three stream n enterprise Wi-Fi systems. Juniper WLC880 Wireless LAN Controller WLA532 Access Point Cisco WLAN Controller 5508 AP 3602 Aruba WLAN Controller 3600 AP 135 Client Equipment One of the significant factors in this high-density testing is our use of real world client machines rather than traffic simulators. We used over three hundred Wi-Fi clients. There are three categories of clients - laptops, smartphones and tablets. We had a variety of clients running different operating systems: Windows 7 Laptops from Dell and HP; MacBook Pros and MacBook Airs; ios, Windows 8 and Android tablets such as the ipad, ipad Mini, Kindle Fire, Galaxy Tab 10.1, Microsoft Surface and Surface Pro; and ios and Android smartphones including iphone 3, 4, and 5, Samsung Galaxy 3s, Nexus and more. These clients included all varieties of Wi-Fi devices that will typically be found in a modern BYOD environment: 2.4 GHz n 1x1 MIMO smartphone clients Dual band 2.4 and 5 GHz 1x1 MIMO 20 MHz tablets Dual band 2.4 GHz and 5 GHz 1x1 MIMO 40 MHz tablets Dual band 2.4 GHz and 5 GHz 2x2 MIMO laptops Dual band 2.4 GHz and 5 GHz 3x3 MIMO laptops High-Density WLAN Testing 5

8 Test Network The test network configuration is shown in Figure 4. This is a high-availability, high-density configuration for the entire network. There are redundant routers, redundant Ethernet switches and redundant wireless LAN controllers. Figure 4 - Test Network Configuration High-Density WLAN Testing 6

9 Testing Methodology Tools We used Ixia Chariot to generate traffic and record throughput. Chariot generates different network traffic flows between pairs of endpoints. Every client machine had the Ixia Endpoint software installed. We had a dedicated hardware Ixia Chariot server with licenses for up to 500 endpoints. We collected packet captures in the 5 GHz band from each AP on each 5 GHz channel. During each test run, we captured packets for 30 seconds in the middle of the data transfer. We extracted data and analyzed the packet captures using EyePA and Cascade Pilot. We used Channelyzer Pro and AirMagnet from Fluke to do spectrum analysis. The spectrum screen shots in this paper are from Channelyzer Pro. We drove the network with traffic generated from three different Chariot scripts: Max Throughput Script The "Max Throughput Script" creates a single TCP stream for smartphones and tablets. Each laptop client was configured to support two TCP streams. All TCP streams are running the High Throughput TCP script from the Chariot server to the client. The high throughput script attempts to send as much data as possible. Bi-Directional Script The "Bi-Directional Script" is a single TCP stream per client for smartphone and tablets, with each one running High Throughput TCP script from the Chariot server down to the client. For laptops there are two TCP streams per client, one running the High Throughput TCP script down from server to client and one running the script up from the client to server. The laptops are the only clients with bidirectional traffic in this test. Low Throughput Script The "Low Throughput Script" is a single TCP stream per client for all clients. All TCP streams are running the High Throughput TCP script from the Chariot server to the client, however, the throughput per client is constrained. For laptops, the throughput is constrained to 5 Mbps per stream, tablets are limited to 2 Mbps and smartphones are limited to 1 Mbps. The scripts are configured to run for two minutes with each client generating continuous streams of traffic. This is one area where this high-density testing goes beyond the typical enterprise usage scenarios. Most wireless LANs experience bursty traffic - some very high throughput peaks, followed by longer periods of low activity. Constant load from all clients for a two minute period is very unusual, and difficult for networks to handle. Even streaming video traffic consists of bursts of data with gaps. With bursty traffic, the pressure on the network is relieved during the gaps in offered load. With continuous offered load, retransmissions compete with new transmissions, congestion builds and there is no opportunity to relieve this pressure. This extreme traffic pattern generated by our test scripts is useful for high-density testing because it allows us to simulate what would happen to these networks with many more clients running more typical network traffic patterns. Each time we conducted a test, we would run the test at least three times to ensure that we were getting consistent results. With over three hundred clients of different types with different operating systems, perfection was not possible. We spent a great deal of time configuring the clients to ensure that they were active on the network and running the proper software. Before running each series of tests we ran a script that would contact each client to make sure that it was active, on the network and running the Chariot endpoint software. However, there were always High-Density WLAN Testing 7

10 a few clients that would not initialize properly and did not complete the tests. The clients could be unavailable for a variety of reasons: their battery died, they were off-line downloading new firmware, their Wi-Fi turned off, or their network protocol stack was not running correctly. We decided that this was a realistic part of the test and since the number of such off line clients was always small, it did not materially affect the results of the test. WLAN Infrastructure Configuration Overall, we followed the manufacturer recommendations and guidelines for high-density deployments. We configured the APs manually, with static channel assignment and power levels even though the vendors usually recommend automatic channel tuning. We wanted to maintain a consistency of configuration that would be repeatable throughout the testing, and we did not want any channel changes to occur during the testing. Our testing area inside the Dome was a large open space. Every client device was close enough to hear every AP, and the APs were all within range of each other. In order to provide maximum capacity, we wanted to avoid sharing the same channels between APs. This is not possible in the 2.4 GHz band. With only three independent Wi-Fi channels available, we had to use each 2.4 GHz channel twice. We separated the APs operating on the same channel as far as possible, but they were clearly overlapping and any associated clients will also share the same channel. This 2.4 GHz configuration is not ideal, but it exemplifies a real world constraint that most enterprise networks have to address. High-Density Channel Configuration At 5 GHz, there is more unlicensed spectrum and more independent channels are available. For high-density environments we wanted as many independent channels as possible. Since our client devices included many modern n clients, we also wanted to use 40 MHz wide channels in the 5 GHz band for the highest data rates possible. We initially configured six independent 40 MHz channels in the 5 GHz band, one for each AP. The high-density channel layout for the APs is shown in the table at right. This channel configuration at 5 GHz uses two Dynamic Frequency Selection (DFS) channels: 52+ and In order to use these DFS channels, the system must detect radar operating in those frequencies. If radar is detected, the wireless LAN must abandon that channel and move to an alternate channel. During the network configuration and test, we experienced at least two radar events a day. (The Dome is located very close to an active airport, Moffett Federal Airfield.) These DFS events modified the test results and made the testing less repeatable. Overall, using the DFS channels proved to be too disruptive and time consuming during our testing. Therefore we changed the 5 GHz channel plan to avoid the DFS channels and moved to a fixed configuration that was of lower capacity for most of the testing. High-Density WLAN Testing 8

11 Fixed 5 GHz Channel Configuration The original high-density channel configuration with six independent 5 GHz channels used 300 MHz of spectrum - six 40 MHz channels in the 5 GHz band, one for each AP; and three 20 MHz channels in the 2 GHz band shared by the six APs. For the bulk of the testing we adopted a fixed 5 GHz channel configuration that avoids the DFS channels. This fixed configuration is 240 MHz total. The 2.4 GHz is the same - three 20 MHz channels shared by six APs. The 5 GHz band is four independent 40 MHz channels and one 20 MHz channel. Channel 165, the 20 MHz channel, is shared by two APs. Overall, the potential capacity for the system under test was reduced by 20% to 25% compared to the highest capacity configuration, which is acceptable for this high-density WLAN testing. This fixed configuration is more complicated, since there is a 20 MHz channel at 5 GHz shared by two APs. The testing scenarios that we constructed will push the systems to their limits and we should be able to observe how different systems allocate the limited resources to best serve the wireless LAN clients. High-Density WLAN Testing 9

12 Client Configuration The clients were arranged in rows of twenty. When a client machine was entered into the test bed it was assigned a specific location, it was named after that location, and that never changed. For example, D10 is a Dell laptop running Windows 7 with a 3 stream n Wi-Fi network adapter. That machine has a physical label D10 and a software label D10 and would always be at location row D seat 10. Figure 5 Client Devices in Seats Figure 6 shows the arrangement of clients on the floor. We ran each set of Chariot tests with three different client configurations - All, Half, and Third. When configuring the tests for fewer clients, we attempted to maintain an even spread of clients throughout the space. For the Half load configuration, we removed every other row of clients from the test. For the Third load configuration, we removed more rows as shown in Figure 6 below. Figure 6 - Client Configurations High-Density WLAN Testing 10

13 High-Density Testing While we were configuring the clients and experimenting with the wireless LAN system to get a repeatable test configuration, we were consistently getting test runs where the aggregate throughput was 625 Mbps for the Juniper infrastructure. This throughput was reported by Chariot at the TCP file transfer level. Here is one example of testing in the higher capacity configuration that used six independent 5 GHz channels. Bi-Directional Script - All Clients, DFS Channels This is the Bi-Directional throughput script with 295 clients: 118 laptops, 54 smartphones and 123 tablets. This particular test run produced 520 Mbps aggregate throughput across all the clients. The Throughput graph above is generated by Chariot. There is a line for each TCP stream in the test. Periodically during the test, the Chariot endpoint sends a timing record that indicates its current throughput. These are plotted on the graph for each stream. Some of the instantaneous throughput is quite high, but when averaged over the entire two minute duration, the average throughput achieved by a given stream is much lower. The histogram at right shows the percentage of the streams that delivered a given average throughput for the entire test. In this test, 6% of the streams had no throughput these were usually Chariot initialization errors. 27% of the streams delivered less than.5 Mbps, 26% of the streams had throughput between. 5 Mbps and 1 Mbps, etc. Almost 100% of the streams had throughput less than 4 Mbps, and there were a few outliers that achieved up to 20 Mbps averaged over the entire test. This pattern is repeated in most of the very high load tests. These tests generate very high offered load for 120 seconds. Almost all of the clients get modest 40.0%$ 35.0%$ 30.0%$ 25.0%$ 20.0%$ 15.0%$ 10.0%$ 5.0%$ 0.0%$ Juniper%BiDir%All%% 0$ 1$ 2$ 3$ 4$ 5$ 6$ 7$ 8$ 9$ 11$ 13$ 15$ 17$ 19$ Mbps% High-Density WLAN Testing 11

14 throughput - 1 or 2 Mbps - when averaged over the two minute duration of the tests. However, the available throughput is evenly distributed across the clients. Juniper s airtime fairness was consistent. Almost all clients were able to get some data through. Most of the clients were able to get a few megabits of throughput, and no client was allowed to monopolize the airwaves at the expense of the others. This makes sense. In the highest throughput tests, the six APs in the infrastructure each delivered over 100 Mbps for two minutes. This 600+ Mbps aggregate system throughput is shared across 410 different streams of traffic. The average per stream throughput of 1.5 Mbps is exactly as expected. The screen capture above is part of the spectrum display from Channelyzer. The top half of the display is the instantaneous RF energy in the channel and the bottom half is a waterfall display showing the recent past. Most of the Channelyzer displays in this paper show about 60 seconds of past history that occurred in the middle of the 120 second test runs. The 40 MHz channels in the 5 GHz band are simply adjacent 20 MHz channels. The 40 MHz channel 36+ is actually channels 36 and 40 combined. Most modern n Wi-Fi clients support the 5 GHz band; however, some of those clients are only able to utilize 20 MHz wide channels even when the Wi-Fi infrastructure supports the wider 40 MHz channels now standard in n. For example all generations of ipads are 5 GHz capable, but did not support 40 MHz channels until the most recent versions were released. We can see in Figure 6 channel 149 has higher instantaneous RF energy and higher channel occupancy than channel 153 (the upper half of MHz channel). There are likely several clients that support 20 MHz only using channel 149 in this test. The 2.4 GHz Channelyzer view is shown below. It appears that all three channels are completely utilized, with channel 11 being slightly more loaded than the other two. It is important to note that this figure shows three, 20 MHz High-Density WLAN Testing 12

15 channels only. The 2 GHz channel chart is shown on a different scale than the 5 GHz channel chart. Each tick on the horizontal axis of the 5 GHz chart represents 20 MHz, each tick on the 2.4 GHz chart represents 5 MHz. We saved the Juniper controller logs for each run and were able to examine the association table of each AP during the tests. Load balancing worked well, even during this heavily loaded test. Each of the APs supports between 40 and 50 clients, with the exception of AP2 which has 58 clients associated. That matches the Client Distribution by channel which shows the most 2.4 GHz clients on channel 6 and a fairly high number of clients on channel 44+. Client'Distribu-on'by'Channel' Client'Distribu-on'by'AP' 45" 40" 35" 30" 25" 20" 15" 10" 5" 0" 1" 6" 11" 36" 44" 52" 116" 149" 157" 70" 60" 50" 40" 30" 20" 10" 0" 1" 2" 3" 4" 5" 6" This test generated the highest load of our testing and clearly saturated the network. However, the retry rate is relatively low, averaging 27%. The retry rate is also fairly flat across the different APs. When measured by channel, channel 44+ is higher than the rest, but overall retries are similar for all channels. Retries'by'Channel' Retries'by'AP' 100%# 90%# 80%# 70%# 60%# 50%# 40%# 30%# 20%# 10%# 0%# 1# 6# 11# 36# 44# 52# 116# 149# 157# 100%# 90%# 80%# 70%# 60%# 50%# 40%# 30%# 20%# 10%# 0%# 1# 2# 3# 4# 5# 6# High-Density WLAN Testing 13

16 The retry rate is a good indicator of system performance for highdensity networks. The Media Access Control protocol has a positive acknowledgement and retry protocol built in. (This is at the Data Link level below the network and transport layers of the IP and TCP protocols.) As the network becomes saturated, the retry rate rises. These retransmissions compete with new packets for the airwaves, adding to the congestion. As congestion increases the probability of retransmission increases. Eventually the airwaves become filled with packets. As the load increases a higher percentage of these packets are retransmissions. Therefore, once the airwaves are saturated with traffic, useful throughput will drop as more load is added to the system. Eventually networks can become unstable if the retry rate continues to rise with no reduction in offered load. For this series of tests, the system throughput did decline as we added more clients to the test as shown in the table at right. It appears that the network was saturated somewhere between the One Third and One Half client load. Our subjective impression was that the network remained stable under this heavy load and the Retry Rates support this. Each of the APs averaged around 25% Retries for the fully loaded test, which is actually low for a fully saturated network. Bi-Dir Test # Clients Aggregate Throughput All Half Third High-Density WLAN Testing 14

17 Fixed Channel Testing Summary Using the fixed configuration for 5 GHz channels, we ran the Juniper wireless LAN system through the complete series of tests with all the different client loads. It appeared that the maximum aggregate capacity possible for the fixed channel configuration was just below 500 Mbps. There are three different Chariot scripts and each one is run with three client populations. # Clients Bi-Dir Throughput Max Throughput Low Throughput All Half Third The aggregate throughput for the Bi-Directional Tests and the MaxThroughput tests are very similar and show the same trends as we add more clients to the test. This makes sense because those two test scripts involve the same number of streams exchanging data, and they are both configured so that each stream sends as much data as possible during the test. The only difference is the MaxThroughput tests are download only from the Chariot server to the clients. The smartphone and tablet clients have one stream each. The laptop clients have two streams. The Bi- Directional tests are a single download stream to each client with an additional upload stream from client to Chariot server for each of the laptop clients. 600" Juniper'High'Density'Test'Summary' 500" Aggregate'Throughput'Mbps' 400" 300" 200" 100" Low"Throughput" Bi5Direc9onal" Max"Throughput" 0" 0" 50" 100" 150" 200" 250" 300" 350" Client'Density' Most of the test cases overload the network during the two minute test period - illustrating the point that even a modest numbers of clients (the 156 smartphone, tablet and laptop clients of the Half client load) can saturate a modern dual band n Wi-Fi network if all clients are simultaneously generating continuous traffic for a sustained period of time. High-Density WLAN Testing 15

18 The Low Throughput scenario did not fully load the system with 94 clients. System throughput increased with 156 clients but then throughput levels out with 302 clients. The Bi-Directional and Max Throughput scripts put more stress on the system. As more clients are added to these tests, throughput begins to decrease. For both tests throughput increased slightly as we went from 94 to 156 clients, but it is clear that the network is beginning to constrain overall system throughput. The load increased by 66%, but system throughput only increased by 6%. The additional clients add to the congestion and retry rates increase, decreasing the useful system capacity. Ultimately, throughput decreases when the full 302 clients run the test. We increased the load on the system by 94%, but experienced a 12% reduction in system throughput compared to the peak we measured with 156 clients. The black lines on the chart are the linear trends for each curve. They show that although the throughput declines as we add more clients to the overload test cases, this is very gradual. It appears that the system could handle substantially more offered load before it becomes unstable. High-Density WLAN Testing 16

19 Low Throughput Script - Third Clients This is the Low Throughput script with 95 clients participating in the test - 39 laptops, 15 smartphones and 41 tablets. It is the simplest test that we ran. The aggregate throughput for this particular run is 233 Mbps, about half the maximum capacity of this network configuration. 40%# 35%# 30%# 25%# 20%# 15%# 10%# 5%# Low%Throughput%Script2%Third%Clients% Throughput%per%Stream%% 0%# 0# 0.5# 1# 1.5# 2# 2.5# 3# 3.5# 4# 4.5# 5# Mbps% There are 95 streams in the low throughput third load chariot script. The low throughput script caps the throughput from laptop clients at 5 Mbps, tablets at 2 Mbps and smartphones at 1 Mbps. You can clearly see the data caps in the Chariot throughput chart where each line in the chart is the throughput from a single stream in the test. No client reported a single timing record with throughput over 5 Mbps. Channels 44+ and 165 are almost fully utilized. Channel 165 is the 20 MHz channel shared by two APs. The other 5 GHz channels have moderate utilization. It makes sense that channel 165 appears to be more occupied than the other 5 GHz channels - it is supporting twice the number of clients in a smaller channel. We don t have an explanation for the higher usage on channel 44+. It could be as simple as a higher number of laptops were associated with channel 44+, while the lower throughput tablets chose the other 5 GHz channels. High-Density WLAN Testing 17

20 This is one of the few tests where the 2.4 GHz channels are not completely utilized. The instantaneous RF level in the 2.4 GHz channels is high as we would expect, but the history shows that the channels are not fully occupied during the test. Channel 11 has the most utilization and that matches the client distribution as there were nine clients using that channel while channel 6 supported five clients and channel 1 only two. The 2.4 GHz band is not fully loaded so there was likely no client load balancing that occurred for the few clients using those channels. Clients(by(Channel( Client'Distribu-on'by'AP' 30" 25" 25" 20" 20" 15" 15" 10" 10" 5" 5" 0" 1" 6" 11" 36" 44" 149" 157" 165" 0" AP1" AP2" AP3" AP4" AP5" AP6" Band steering appears to work well. 15 of the 95 clients participating in this test are smartphones that do not support the 5 GHz band. Sixteen clients were using the 2.4 GHz channels - all the smartphones and only one other client. The client distribution per AP is fairly even, indicating that the load balancing may be by AP. High-Density WLAN Testing 18

21 Retries'by'Channel' Retries'by'AP' 100%# 100%# 90%# 90%# 80%# 80%# 70%# 70%# 60%# 60%# 50%# 50%# 40%# 40%# 30%# 30%# 20%# 20%# 10%# 10%# 0%# 1# 6# 11# 36# 44# 149# 157# 165# 0%# 1# 2# 3# 4# 5# 6# High-Density WLAN Testing 19

22 Max Throughput Script - Half Clients This was the highest throughput test with the fixed channel configuration, delivering 483 Mbps aggregate system throughput. There were 156 client devices participating in this test - 65 laptops, 27 smartphones and 64 tablets. All clients were running the High Throughout TCP Chariot script from the server down to the endpoint for two minutes. The laptops clients each had two streams. In total, there were 221 TCP streams for this test. The error rate is low and almost half of the clients achieved 2 Mbps or more. 25%# Max%Throughput%Script%2%Half%Clients%% Throughput%per%Stream% 20%# 15%# 10%# 5%# 0%# 0# 1# 2# 3# 4# 5# 6# 7# 8# 9# 11# 13# 15# 17# 19# Mbps% High-Density WLAN Testing 20

23 Client'Distribu-on'by'Channel' Client'Distribu-on'by'AP' 50" 50" 45" 45" 40" 40" 35" 35" 30" 30" 25" 25" 20" 20" 15" 15" 10" 10" 5" 5" 0" 1" 6" 11" 36" 44" 149" 157" 165" 0" 1" 2" 3" 4" 5" 6" Clients are evenly distributed across the APs. Once again, channel 165 supports twice the number of clients, as it is the only 5 GHz channel that is shared by more than one AP. High-Density WLAN Testing 21

24 Retries'by'Channel' Retries'by'AP' 100%# 100%# 90%# 90%# 80%# 80%# 70%# 70%# 60%# 60%# 50%# 50%# 40%# 40%# 30%# 30%# 20%# 20%# 10%# 10%# 0%# 1# 6# 11# 36# 44# 149# 157# 165# 0%# 1# 2# 3# 4# 5# 6# Channel 44+ and channel 157+ have a higher percentage of retries than the others. Overall, the retry rate is surprisingly low. High-Density WLAN Testing 22

25 Bi-Directional Script - All Clients The All Clients configuration is 302 clients including 108 laptops, 53 smartphones and 141 tablets. There are 410 TCP streams in the Chariot script. Each laptop has a downstream TCP stream and an upstream stream. The tablet and smartphone clients have a single downstream pair. In this test, the Juniper system delivered 427 Mbps aggregate throughput. The Chariot throughput report for this test run looks like chaos. All clients are attempting to send traffic continuously and there are 410 separate streams conducting data transfers. Some streams burst up to high speeds briefly but most never get above a few Mbps of throughput when averaged across the entire two minute run. In real networks with typical traffic load, clients will achieve much higher individual throughput rates during their "bursts" of traffic %$ Bi(Direc-onal%Script%(%%All%Clients% Throughput%per%Stream% 35.00%$ 30.00%$ 25.00%$ 20.00%$ 15.00%$ 10.00%$ 5.00%$ 0.00%$ 0$ 0.5$ 1$ 1.5$ 2$ 2.5$ 3$ 3.5$ 4$ 4.5$ 5$ 5.5$ 6$ 6.5$ 7$ 7.5$ 8$ 8.5$ 9$ 10$ 11$ 12$ 13$ 14$ 15$ 16$ 17$ 18$ 19$ 20$ Mbps% High-Density WLAN Testing 23

26 One reason for the lower aggregate system throughput is the higher error rate in this test - almost 15% of the streams did not complete the test. They were not able to send any data during the test or could not send any timing records back to the Chariot server. Client'Distribu-on'by'Channel' Client'Distribu-on'by'AP' 100" 80" 90" 70" 80" 70" 60" 60" 50" 50" 40" 40" 30" 30" 20" 10" 20" 10" 0" 1" 6" 11" 36" 44" 149" 157" 165" 0" 1" 2" 3" 4" 5" 6" High-Density WLAN Testing 24

27 The client distribution is not even for this test. In particular, AP2 and AP5 were unbalanced. AP2 had more than twice the clients of AP5. This is the only test where we did not see even balancing of clients across the APs. It is possible that clients were switching APs during the test because their packet transmissions were timing out. We observed much better distribution of clients across the APs when the network was not as heavily loaded. Retries'by'Channel' Retries'by'AP' 100%# 100%# 90%# 90%# 80%# 80%# 70%# 70%# 60%# 60%# 50%# 50%# 40%# 40%# 30%# 30%# 20%# 20%# 10%# 10%# 0%# 1# 6# 11# 36# 44# 149# 157# 165# 0%# 1# 2# 3# 4# 5# 6# Channel 44+ and 157+ have the highest retry rates. This may be due to client behavior rather than the infrastructure. We noticed that Windows 7 clients seemed to have an affinity for channel 44+. They were usually trying to operate at higher data rates and this may contribute to the higher retry rate. The Windows drivers may need some adjustment to their rate adaptation algorithms. For this clearly overloaded test, the retry rates we observed were still surprisingly low. High-Density WLAN Testing 25

28 General Observations Band steering in the Juniper system was quite effective. Most of the 5 GHz capable clients associated to the 5 GHz radio of their AP. Retries did not increase dramatically as more clients were added to the tests. For the fixed channel configuration, Retry'Rate' the retries remained between 25% and 30% of the overall 35%# traffic. This is a surprising result. We expected to see a 30%# gradual increase in the retry rate as we increased the number of clients participating in the tests. What we observed is essentially a flat retry rate. 25%# 20%# 15%# This reinforces the general notion of system stability that we observed throughout the testing. If the retry rates were rising, this would materially affect the aggregate capacity of the network. 10%# 5%# 0%# 95# 156# 302# Number'of'Clients' BiDir# Max# Low# As more clients are added, the error rate increases. Errors here are streams that were unable to deliver any data throughput during the Chariot test, or clients that were unable to return timing records to the Chariot server, or simply clients that were offline during the test initialization. The increasing error rate is consistent with the throughput decreasing under higher client loads. The majority of these errors are the client devices being unable to complete the Chariot test. These clients likely timed out when trying to send - they exceeded the maximum retry limit for the network. This reflects the decreasing capacity available for each client device as the load on the network increases, and illustrates the poor responsiveness for client devices that is sometimes seen in heavily loaded networks. Error'Rate' 16%# 14%# 12%# 10%# 8%# 6%# BiDir# 4%# Max# 2%# Low# 0%# 95# 156# 302# Number'of'Clients' High-Density WLAN Testing 26

29 Overall, 5 GHz traffic had a higher retry rate than 2.4 GHz traffic. In particular channel 44+ and 157+ had higher retry rates than the other channels. It may be that the clients on those channels were operating with 40 MHz channels and at higher modulation rates than the other channels, and thus were prone to higher packet errors and retries. Channel 165 supported twice the number of clients as channel 44+ and 157+ but actually had lower retry rates on every test. Retry&Rate&& 50%# 45%# 40%# 35%# 30%# 25%# 20%# Retry&Rate&by&Channel&4&Max&Thruput& 1# 6# 11# 36# 44# 15%# 10%# 5%# 157# 165# 149# 0%# 0# 50# 100# 150# 200# 250# 300# 350# Number&of&Clients& We were able to get some information about client behavior from the Juniper controller logs that may help explain the behavior. The none category in the Retry Rates by Device chart could be any client. These were primarily Android tablets such as the Kindle Fire which are not counted separately. Windows 7 and Windows 8 clients have higher packet retry rates. They were using 40 MHz channels and generally were using higher modulation rates than the other client types. The wider channels and higher modulation rates are more prone to packet errors. 60%# 50%# Average'Retry'Rates'by'Device' (BiDir,'302'clients)' 40%# 30%# 20%# 10%# 0%# none# ipod# iphone# ipad# ios3generic# android3generic# windows7# windows8# macos3generic# High-Density WLAN Testing 27

30 The chart below shows which channels the clients tended to use. We were able to gather this information from the Juniper controller logs which have a very detailed association table including this device type information. ipads seem to favor channels 36+ and 165. The smartphones (ipod Touch included) stay mostly in the 2.4 GHz channels. Device"Type"by"Channel" 40" 35" 30" #"Clients" 25" 20" 15" 10" none" ipod" iphone" ipad" IOS"generic" Android" Windows7" Windows8" MacOS" 5" 0" 1" 6" 11" 36" 44" 149" 157" 165" Channel"" Channel 44+ has a number of Windows 7 clients associated. During the Bi-Directional Throughput and Max Throughput tests, laptops have two streams per device, so they are generating more traffic than tablets or smartphones. It appears as though the Windows laptops take over channel 44+ and then try to operate at higher modulation rates which causes increased packet errors and subsequently increased packet retries. High-Density WLAN Testing 28

31 Conclusions Almost all Wireless LANs will have some areas of high-density in their networks. For some networks like stadium networks and many education networks most of the network will be high-density. It is important to understand how these systems work under high load and with real clients in order to properly choose the right network equipment and configure it properly. In this paper we have described a testing facility for evaluating high-density networks and understand the underlying phenomena that are occurring. We were able to construct a repeatable test scenario with up to 302 typical Wi-Fi clients accessing an enterprise wireless LAN consisting of six dual-band n enterprise access points. We used packet captures, spectrum analysis, the Chariot testing results, and even the Juniper controller logs to describe the behavior of the system and compare performance of different configurations. High-density wireless LANs should leverage all of the available resources, and ensure that modern Wi-Fi clients can operate in the highest performance mode configure as many 40 MHz channels as possible in the 5 GHz band. Systems that efficiently spread the available resources across the clients will perform better and remain stable under higher loads. We found that subtle network configuration and management features can lead to large differences in performance. Band steering and load balancing are important system features that contribute to this, and we were able to observe their impact on performance during the testing. We also observed air time fairness and rate adaptation algorithms in action. In general, all the clients were able to get some throughput and no client was able to dominate the network. Key Findings Juniper has an amazing high-density testing facility where we were able to construct a repeatable test scenario with 302 typical Wi-Fi clients accessing an enterprise wireless LAN consisting of six modern dual-band n enterprise access points. Most of the tests we conducted overload the network with more traffic than is possible to deliver during the testing period. This allowed us to observe the systems under high stress. We gathered a tremendous amount of data during the tests. After analyzing the results, the important factors that differentiate a high performing high-density WLAN are the details of subtle system level features. Juniper s Band Steering worked well. The 5 GHz capable clients consistently moved to the 5 GHz channels where there is more bandwidth available. Load Balancing worked well. On a variety of tests with different client populations, the client devices were spread evenly across the available APs. Rate adaptation was properly tuned for a variety of different client devices. The Juniper WLAN system delivered consistent throughput and operated in a stable fashion under very high offered load. Under the highest load, with hundreds of clients accessing the network simultaneously, almost all of the individual clients were able to deliver modest data throughput during the tests, and no client was able to grab an unfair share of the available capacity. The retry rates were moderate and stayed relatively flat as we increased the number of clients participating in the tests. At maximum client load with the high throughput tests, aggregate system throughput declined compared to the peak throughput we measured. However, the retry rates were lower than we expected, and it appeared that the system would remain stable with even higher loads. When compared to competitive systems, the Juniper system delivered more aggregate throughput under heavy load. High-Density WLAN Testing 29

32 Appendix - About Novarum Novarum is an independent consulting firm specializing in wireless broadband technology and business. Novarum provides consulting, strategic advice, analysis and network design for cities, service providers, enterprises and vendors in the wireless broadband industry. Our technology focus spans Wi-Fi, WiMAX and 4G cellular data systems. Novarum offers a unique insider perspective from pioneers in the wireless and networking industry who have practical experience bringing wireless products to market. Phil Belanger Phil has over 25 years of broad leadership in the technology, marketing and standards of data networks. Phil pioneered local area networking technology with Zilog and Corvus and extended that leadership by co-leading the multi-company technical and marketing efforts that produced the original IEEE wireless LAN standard. Phil defined the original market position of wireless LANs for mobile computing with Xircom. While at Aironet, he broadened the market for wireless LANs and laid the foundation for Wi-Fi's success with the acquisition of Aironet by Cisco. Phil was one of the founders of the the Wi-Fi Alliance and served as the group s initial Chairman, creating the Wi-Fi brand and promoting Wi-Fi for the entire industry. He helped create the business model for Wi-Fi service providers with Wayport and expanded the market for Wi-Fi infrastructure with extended range technology of Vivato and municipal mesh networks at BelAir Networks. Ken Biba Ken is a rocket scientist. He also has many years experience in the network information systems industry bringing a unique background of general management with a strong product and marketing focus in network systems and information security. Ken was an early engineer of the Internet in He has co-founded and managed four notable networking companies Sytek, which was focused on cable TV-based local and metropolitan data networks, Agilis which was focused on wireless handheld computers, Xircom, which developed local area network client products for mobile computing, and Vivato, which was focused on scaling Wi-Fi infrastructure to cover campuses and metropolitan areas. Ken's perspective as CEO, board member of public and private companies, and as a technologist brings unique insight to the business, market and technology of bringing useful wireless solutions to users. Ken has a Bachelor of Science in Physics (Magna Cum Laude, Tau Beta Pi) and a Master of Science in Computer Science from Case Western Reserve University. Wayne Gartin Wayne is a senior executive with world-wide experience at start-ups and Fortune 500 companies. He has built high level relationships and delivered business partnerships at all levels for companies in the communication, software, and semiconductor markets. Wayne has worked with industry leading suppliers in all aspects of network technology, including long haul transport, metropolitan networks, wired and wireless LANs. He has successfully run multi-million dollar sales teams for companies in the access (last mile) consumer oriented markets, Passive Optical Networks, VoIP, and IMS. Wayne has held executive and senior level positions at Centillium, Agility (now JDSU), Bandwidth 9 (now NeoPhotonics), Infineon, Lucent, Adaptec, and Intel. He is also the co-founder of a semi-conductor IP company. Wayne s experience with multiple channels and leading successful sales teams to multi-million dollar revenue levels brings a unique insight to the strategies necessary to successfully launch new products and technologies into the market. Wayne has a BS in Math and an MBA from the University of Utah. He has been a certified instructor for sales and marketing courses in strategic planning, negotiations, and sales management. High-Density WLAN Testing 30

Performance Testing of 802.11n Enterprise Access Points

Performance Testing of 802.11n Enterprise Access Points Performance Testing of 802.11n Enterprise Access Points April, 2012 Copyright 2012 Novarum Inc. Executive Summary 2 Test Environment 3 Testing Methodology 5 Test Results 6 Coverage and Capacity 8 Conclusions

More information

High Density WLAN Comparison Testing: Aruba, Cisco and Juniper. September 2013. Copyright 2013 Novarum Inc.

High Density WLAN Comparison Testing: Aruba, Cisco and Juniper. September 2013. Copyright 2013 Novarum Inc. High Density WLAN Comparison Testing: Aruba, Cisco and Juniper September 2013 Copyright 2013 Novarum Inc. Executive Summary 2 Key Findings 2 Test Environment 3 The Facility 3 Infrastructure Equipment 5

More information

QUALITY OF SERVICE FOR CLOUD-BASED MOBILE APPS: Aruba Networks AP-135 and Cisco AP3602i

QUALITY OF SERVICE FOR CLOUD-BASED MOBILE APPS: Aruba Networks AP-135 and Cisco AP3602i QUALITY OF SERVICE FOR CLOUD-BASED MOBILE APPS: Aruba Networks AP-135 and Cisco AP3602i Conducted at the Aruba Proof-of-Concept Lab November 2012 Statement of test result confidence Aruba makes every attempt

More information

Solving the Sticky Client Problem in Wireless LANs SOLVING THE STICKY CLIENT PROBLEM IN WIRELESS LANS. Aruba Networks AP-135 and Cisco AP3602i

Solving the Sticky Client Problem in Wireless LANs SOLVING THE STICKY CLIENT PROBLEM IN WIRELESS LANS. Aruba Networks AP-135 and Cisco AP3602i SOLVING THE STICKY CLIENT PROBLEM IN WIRELESS LANS Aruba Networks AP-135 and Cisco AP3602i Conducted at the Aruba Proof-of-Concept Lab May 2013 Statement of test result confidence Aruba makes every attempt

More information

WI-FI PERFORMANCE BENCHMARK TESTING: Aruba Networks AP-225 and Cisco Aironet 3702i

WI-FI PERFORMANCE BENCHMARK TESTING: Aruba Networks AP-225 and Cisco Aironet 3702i WI-FI PERFORMANCE BENCHMARK TESTING: Networks AP-225 and Cisco Aironet 3702i Conducted at the Proof-of-Concept Lab January 24, 2014 Statement of Test Result Confidence makes every attempt to optimize all

More information

Best Practices for High Density Wireless Network Design In Education and Small/Medium Businesses

Best Practices for High Density Wireless Network Design In Education and Small/Medium Businesses Best Practices for High Density Wireless Network Design In Education and Small/Medium Businesses White Paper Table of Contents Executive Summary 3 Introduction 3 Determining Access Point Throughput 4 Establishing

More information

ALLION USA INTERNET SERVICE PROVIDER WIRELESS GATEWAY COMPETITIVE ANALYSIS

ALLION USA INTERNET SERVICE PROVIDER WIRELESS GATEWAY COMPETITIVE ANALYSIS ALLION USA INTERNET SERVICE PROVIDER WIRELESS GATEWAY COMPETITIVE ANALYSIS Date: 4/25/2013 Rev 1.0 Visit our Web Site at: www.allionusa.com 1 Introduction Internet Service Providers (ISP) have a number

More information

Lab Testing Summary Report

Lab Testing Summary Report MEGABITS/SEC Key findings and conclusions: Lab Testing Summary Report January 215 Report 141212 Product Category: Wireless Access Points Vendor Tested: Cisco's Aironet 1572 AP delivers from 4 and 58 percent

More information

WLAN solutions to manage 1:1 and BYOD in K-12

WLAN solutions to manage 1:1 and BYOD in K-12 MERU EDUCATION-GRADE SOLUTIONS FOR UNINTERRUPTED LEARNING SOLUTION BRIEF K-12 WLAN solutions to manage 1:1 and BYOD in K-12 BYOD Solutions for K-12/primary schools 1:1 computing where students are provided

More information

VIA CONNECT PRO Deployment Guide

VIA CONNECT PRO Deployment Guide VIA CONNECT PRO Deployment Guide www.true-collaboration.com Infinite Ways to Collaborate CONTENTS Introduction... 3 User Experience... 3 Pre-Deployment Planning... 3 Connectivity... 3 Network Addressing...

More information

HUAWEI Enterprise AP Series 802.11ac Brochure

HUAWEI Enterprise AP Series 802.11ac Brochure Enterprise AP Series 802.11ac Brochure 01 Enterprise AP Series 802.11ac Brochure 1 Overview Release of 802.11ac standards has driven wireless technologies to the era of GE Wi-Fi. Enterprise Wi-Fi networks

More information

Cloud-based Wireless LAN for Enterprise, SMB, IT Service Providers and Carriers. Product Highlights. Relay2 Enterprise Access Point RA100 Datasheet

Cloud-based Wireless LAN for Enterprise, SMB, IT Service Providers and Carriers. Product Highlights. Relay2 Enterprise Access Point RA100 Datasheet Cloud-based Wireless LAN for Enterprise, SMB, IT Service Providers and Carriers The Relay2 Smart Access Point (RA100) is an enterprise-class access point designed for deployment in high-density environments

More information

Guide for wireless environments

Guide for wireless environments Sanako Study Guide for wireless environments 1 Contents Sanako Study... 1 Guide for wireless environments... 1 What will you find in this guide?... 3 General... 3 Disclaimer... 3 Requirements in brief...

More information

Understanding the IEEE 802.11ac Wi Fi Standard Preparing for the next gen of WLAN

Understanding the IEEE 802.11ac Wi Fi Standard Preparing for the next gen of WLAN WHITEPAPER Understanding the IEEE 802.11ac Wi Fi Standard Preparing for the next gen of WLAN July 2013 Author: Richard Watson Contributors: Dennis Huang, Manish Rai Table of Contents Executive summary...

More information

Wireless Ethernet LAN (WLAN) General 802.11a/802.11b/802.11g FAQ

Wireless Ethernet LAN (WLAN) General 802.11a/802.11b/802.11g FAQ Wireless Ethernet LAN (WLAN) General 802.11a/802.11b/802.11g FAQ Q: What is a Wireless LAN (WLAN)? Q: What are the benefits of using a WLAN instead of a wired network connection? Q: Are Intel WLAN products

More information

Optimizing Wireless Networks.

Optimizing Wireless Networks. from the makers of inssider Optimizing Wireless Networks. Over the past few years, MetaGeek has created tools to help users optimize their wireless networks. MetaGeek s tools help visualize the physical

More information

VOICE OVER WI-FI CAPACITY PLANNING

VOICE OVER WI-FI CAPACITY PLANNING VOICE OVER WI-FI CAPACITY PLANNING Version 1.0 Copyright 2003 Table of Contents Introduction...3 Wi-Fi RF Technology Options...3 Spectrum Availability and Non-Overlapping Wi-Fi Channels...4 Limited

More information

Meru MobileFLEX Architecture

Meru MobileFLEX Architecture Meru MobileFLEX Architecture Bringing new levels of choice and control to enterprise wireless LANs Mobility has transformed work from a location to an activity. Smartphones, tablets, and laptops enable

More information

Radio Frequency (RF) Survey

Radio Frequency (RF) Survey Municipal Wireless Broadband and the Digital Community Report Radio Frequency (RF) Survey for the City and County of San Francisco July 21, 2006 Preface This document describes Civitium s findings and

More information

VIA COLLAGE Deployment Guide

VIA COLLAGE Deployment Guide VIA COLLAGE Deployment Guide www.true-collaboration.com Infinite Ways to Collaborate CONTENTS Introduction... 3 User Experience... 3 Pre-Deployment Planning... 3 Connectivity... 3 Network Addressing...

More information

Mobility Challenge. Challenge #1: User Experience:

Mobility Challenge. Challenge #1: User Experience: Mobility Challenge Challenge #1: User Experience: Explosion of wireless devices drives wireless access needs and issues Need for video support for distance learning, rich digital content and professional

More information

The ArubaOS Spectrum Analyzer Module

The ArubaOS Spectrum Analyzer Module Tech Brief Enterprise The ArubaOS Spectrum Analyzer Module The ArubaOS Spectrum Analyzer Module Tech Brief Table of Contents Introduction... 2 Visibility into the non-802.11 Spectrum... 2 Features... 3

More information

CWNA Instructor Led Course Outline

CWNA Instructor Led Course Outline CWNA Instructor Led Course Outline Enterprise Wi-Fi Administration, Outline v7.0 Introduction The Enterprise Wireless LAN Administration 7.1 course (which prepares students for the CWNA-106 exam), whether

More information

Meru MobileFLEX Architecture

Meru MobileFLEX Architecture Meru MobileFLEX Architecture Bringing new levels of choice and control to enterprise wireless LANs Today, network management is a tug-of-war between user demands and IT requirements. Users are pulling

More information

Municipal Mesh Network Design

Municipal Mesh Network Design White Paper Municipal Mesh Network Design Author: Maen Artimy 1 Summary This document provides a wireless mesh network design for the downtown area of the Town of Wolfville, Nova Scotia. This design serves

More information

VMWARE WHITE PAPER 1

VMWARE WHITE PAPER 1 1 VMWARE WHITE PAPER Introduction This paper outlines the considerations that affect network throughput. The paper examines the applications deployed on top of a virtual infrastructure and discusses the

More information

LTE, WLAN, BLUETOOTHB

LTE, WLAN, BLUETOOTHB LTE, WLAN, BLUETOOTHB AND Aditya K. Jagannatham FUTURE Indian Institute of Technology Kanpur Commonwealth of Learning Vancouver 4G LTE LTE (Long Term Evolution) is the 4G wireless cellular standard developed

More information

Reasons to Choose the Juniper ON Enterprise Network

Reasons to Choose the Juniper ON Enterprise Network Reasons to Choose the Juniper ON Enterprise Network Juniper s enterprise access products meet the always-on needs of today s enterprises by delivering solutions that are reliable, simple, and smart. The

More information

ADDENDUM 12 TO APPENDIX 8 TO SCHEDULE 3.3

ADDENDUM 12 TO APPENDIX 8 TO SCHEDULE 3.3 ADDENDUM 12 TO APPENDIX 8 TO SCHEDULE 3.3 TO THE Overview EXHIBIT T to Amendment No. 60 Secure Wireless Network Services are based on the IEEE 802.11 set of standards and meet the Commonwealth of Virginia

More information

Cisco Outdoor Wireless Mesh Enables Alternative Broadband Access

Cisco Outdoor Wireless Mesh Enables Alternative Broadband Access Cisco Outdoor Wireless Mesh Enables Alternative Broadband Access Cisco ServiceMesh defines a network design for service providers delivering valueadded municipal wireless services over a mesh network.

More information

Radio Resource Management in HiveOS. solution brief

Radio Resource Management in HiveOS. solution brief Radio Resource Management in HiveOS solution brief Radio Resource Management in HiveOS Introduction As enterprise wireless LANs have grown from a curiosity providing access in conference rooms into the

More information

AT&T activearc unified IP data solution

AT&T activearc unified IP data solution Solution Brief AT&T activearc unified IP data solution Flexible IP networking options to fit your needs What is the AT&T activearc solution? The AT&T activearc solution is a wired and wireless Ethernet

More information

Lab Testing Summary Report

Lab Testing Summary Report Lab Testing Summary Report December 14 Report 141214 Product Category: Wireless Access Points Vendor Tested: Key findings and conclusions: Tests found the Cisco Aironet 2702 and 5508 controller can sustain

More information

IEEE 802.11n Enterprise Class Wireless LAN?

IEEE 802.11n Enterprise Class Wireless LAN? Introduction Over the last decade Wi-Fi has advanced from a technology offering a maximum 2Mbps over-theair data rate, to 11Mbps and now to 54Mbps. The technology has been improved to include additions

More information

Supporting Municipal Business Models with Cisco Outdoor Wireless Solutions

Supporting Municipal Business Models with Cisco Outdoor Wireless Solutions Supporting Municipal Business Models with Cisco Outdoor Wireless Solutions EXECUTIVE SUMMARY Outdoor wireless networks are playing a vital role in helping municipalities deliver critical services to citizens.

More information

Top Six Considerations

Top Six Considerations Top Six Considerations for Upgrading to table of contents + Section I: Introduction Understanding...2 + Section II: Uses Cases for... 3 + Section III: Top 6 considerations for...5 + Section IV: Conclusion...

More information

The WestNet Advantage: -- Textbooks, ebooks, ecourses -- Instructor Resourse Center -- Student Resource Center

The WestNet Advantage: -- Textbooks, ebooks, ecourses -- Instructor Resourse Center -- Student Resource Center The WestNet Advantage: -- Textbooks, ebooks, ecourses -- Instructor Resourse Center -- Student Resource Center The entire cost of the program is funded by the textbook, ebook or ecourse purchase by your

More information

Cisco Outdoor Wireless Network Serves Up Automatic Meter Reading

Cisco Outdoor Wireless Network Serves Up Automatic Meter Reading Cisco Outdoor Wireless Network Serves Up Automatic Meter Reading Summary Cisco outdoor wireless solutions make it practical to deploy and manage Wi-Fi on a citywide scale. This application note describes

More information

Wireless Network Standard and Guidelines

Wireless Network Standard and Guidelines Wireless Network Standard and Guidelines Purpose The standard and guidelines listed in this document will ensure the uniformity of wireless network access points and provide guidance for monitoring, maintaining

More information

Enabling the Wireless School Challenges & Benefits of Wireless LANs in Primary Education

Enabling the Wireless School Challenges & Benefits of Wireless LANs in Primary Education WHITE PAPER Enabling the Wireless School Challenges & Benefits of Wireless LANs in Primary Education Date: February 2009 Copyright 2010 Meru. All rights reserved. TABLE OF CONTENTS INTRODUCTION... 3 GROWING

More information

SmartDiagnostics Application Note Wireless Interference

SmartDiagnostics Application Note Wireless Interference SmartDiagnostics Application Note Wireless Interference Publication Date: May 27, 2015 KCF Technologies, Inc. Background The SmartDiagnostics wireless network is an easy to install, end-to-end machine

More information

Meraki Wireless Solution Comparison

Meraki Wireless Solution Comparison Meraki Wireless Solution Comparison Why Meraki? Simplified cloud management Intuitive interface allows devices to be configured in minutes without training or dedicated staff Centrally manage thousands

More information

Wireless Technologies in Industrial Markets

Wireless Technologies in Industrial Markets SOLUTION PAPER Wireless Technologies in Industrial Markets An Examination of Mesh Technologies in Mining Executive Summary Consumers and enterprises around the globe use standards-based 802.11a/b/g/n WiFi

More information

Spring 2014. Final Project Report

Spring 2014. Final Project Report ENSC 427: COMMUNICATIONNETWORKS Spring 2014 Final Project Report Evaluation and Comparison of WiMAX (802.16a) and Wi-Fi (802.11a) http://www.sfu.ca/~tlan/ensc427webpage.html Group #11 Tian Lan tlan@sfu.ca

More information

Planning for 802.11ac Adoption with Ekahau Site Survey 6.0

Planning for 802.11ac Adoption with Ekahau Site Survey 6.0 Planning for 802.11ac Adoption with Ekahau Site Survey 6.0 1 P a g e w w w. e k a h a u. c o m / e s s Introduction to 802.11ac The emerging next generation Wi-Fi standard IEEE 802.11ac aims to break the

More information

LTE Test: EE 4G Network Performance

LTE Test: EE 4G Network Performance LTE Test: EE 4G Network Performance An Analysis of Coverage, Speed, Latency and related key performance indicators, from October 31 st to December 20 th, 2012. Disclaimer Epitiro has used its best endeavours

More information

Figure 1: Bandwidth and coverage of wireless technologies [2].

Figure 1: Bandwidth and coverage of wireless technologies [2]. Simulation and Performance Evaluation of WiFi and WiMAX using OPNET Ravinder Paul, Sukhchandan Lally, and Ljiljana Trajković Simon Fraser University Vancouver, British Columbia Canada E-mail: {rpa28, lally,

More information

Portable Wireless Mesh Networks: Competitive Differentiation

Portable Wireless Mesh Networks: Competitive Differentiation Portable Wireless Mesh Networks: Competitive Differentiation Rajant Corporation s kinetic mesh networking solutions combine specialized command and control software with ruggedized, high-performance hardware.

More information

ENSC 427: Communication Networks. Analysis of Voice over IP performance on Wi-Fi networks

ENSC 427: Communication Networks. Analysis of Voice over IP performance on Wi-Fi networks ENSC 427: Communication Networks Spring 2010 OPNET Final Project Analysis of Voice over IP performance on Wi-Fi networks Group 14 members: Farzad Abasi (faa6@sfu.ca) Ehsan Arman (eaa14@sfu.ca) http://www.sfu.ca/~faa6

More information

Wireless Network Policy

Wireless Network Policy Wireless Network Policy Purpose Guide the deployment and integrity of wireless networking on the Kettering University campus to ensure reliable, compatible, and secure operation Protect the security of

More information

Carrier-Grade. Wi-Fi Solutions. Wi-Fi Solutions

Carrier-Grade. Wi-Fi Solutions. Wi-Fi Solutions Carrier-Grade Wi-Fi Solutions Wi-Fi Solutions Alvarion s Carrier-Grade Wi-Fi Solutions Today, with the widespread adoption of smartphones, iphones, ipads and the like, users expect reliable Wi-Fi services

More information

Cellular Data Offload. And Extending Wi-Fi Coverage. With Devicescape Easy WiFi

Cellular Data Offload. And Extending Wi-Fi Coverage. With Devicescape Easy WiFi Cellular Data Offload And Extending Wi-Fi Coverage With Devicescape Easy WiFi Case Study October 2010 List of Acronyms 3G Third Generation 4G Fourth Generation API Application Programming Interface AP

More information

LTE-Advanced Carrier Aggregation Optimization

LTE-Advanced Carrier Aggregation Optimization Nokia Networks LTE-Advanced Carrier Aggregation Optimization Nokia Networks white paper LTE-Advanced Carrier Aggregation Optimization Contents Introduction 3 Carrier Aggregation in live networks 4 Multi-band

More information

TamoSoft Throughput Test

TamoSoft Throughput Test TAKE CONTROL IT'S YOUR SECURITY TAMOSOFT df TamoSoft Throughput Test Help Documentation Version 1.0 Copyright 2011-2014 TamoSoft Contents Contents... 2 Introduction... 3 Overview... 3 System Requirements...

More information

Maximizing Throughput and Coverage for Wi Fi and Cellular

Maximizing Throughput and Coverage for Wi Fi and Cellular Maximizing Throughput and Coverage for Wi Fi and Cellular A White Paper Prepared by Sebastian Rowson, Ph.D. Chief Scientist, Ethertronics, Inc. www.ethertronics.com March 2012 Introduction Ask consumers

More information

Boosting Data Transfer with TCP Offload Engine Technology

Boosting Data Transfer with TCP Offload Engine Technology Boosting Data Transfer with TCP Offload Engine Technology on Ninth-Generation Dell PowerEdge Servers TCP/IP Offload Engine () technology makes its debut in the ninth generation of Dell PowerEdge servers,

More information

JUNIPER NETWORKS WIRELESS LAN SOLUTION

JUNIPER NETWORKS WIRELESS LAN SOLUTION SOLUTION BROCHURE JUNIPER NETWORKS WIRELESS LAN SOLUTION Deliver Secure, Scalable, and Reliable Campus Mobility While Maximizing Performance and Minimizing Cost of Ownership Wireless LAN Solution Overview

More information

Wideband: Delivering the Connected Life

Wideband: Delivering the Connected Life White Paper Wideband: Delivering the Connected Life Subscribers are increasingly demanding many services to many screens. They want the convenience of having services available anytime, anywhere, and on

More information

Site Survey and RF Design Validation

Site Survey and RF Design Validation CHAPTER 8 Site Survey Introduction In the realm of wireless networking, careful planning is essential to ensure that your wireless network performs in a manner that is consistent with Cisco s design and

More information

Quality of Service Analysis of Video Conferencing over WiFi and Ethernet Networks

Quality of Service Analysis of Video Conferencing over WiFi and Ethernet Networks ENSC 427: Communication Network Quality of Service Analysis of Video Conferencing over WiFi and Ethernet Networks Simon Fraser University - Spring 2012 Claire Liu Alan Fang Linda Zhao Team 3 csl12 at sfu.ca

More information

Understanding and Optimizing 802.11n

Understanding and Optimizing 802.11n Understanding and Optimizing 802.11n Buffalo Technology July 2011 Brian Verenkoff Director of Marketing and Business Development Introduction: Wireless networks have always been difficult to implement

More information

Measure wireless network performance using testing tool iperf

Measure wireless network performance using testing tool iperf Measure wireless network performance using testing tool iperf By Lisa Phifer, SearchNetworking.com Many companies are upgrading their wireless networks to 802.11n for better throughput, reach, and reliability,

More information

CT522-128 LANforge WiFIRE Chromebook 802.11a/b/g/n WiFi Traffic Generator with 128 Virtual STA Interfaces

CT522-128 LANforge WiFIRE Chromebook 802.11a/b/g/n WiFi Traffic Generator with 128 Virtual STA Interfaces 1 of 8 Network Testing and Emulation Solutions http://www.candelatech.com sales@candelatech.com +1 360 380 1618 [PST, GMT -8] CT522-128 LANforge WiFIRE Chromebook 802.11a/b/g/n WiFi Traffic Generator with

More information

White Paper. Delivering Reliable Wi-Fi in Large Public Venues

White Paper. Delivering Reliable Wi-Fi in Large Public Venues White Paper Versus Cancer concert at the 21,000 capacity Manchester Arena, courtesy of Karin Albinsson. Delivering Reliable Wi-Fi in Large Public Venues June 2013 Copyright 2013, Extricom, Ltd. All rights

More information

Application Note License-Exempt Gigabit Ethernet Microwave Radio Applications

Application Note License-Exempt Gigabit Ethernet Microwave Radio Applications Application Note License-Exempt Gigabit Ethernet Microwave Radio Applications Applicable Products: EX-5r GigE, EX-5r-c GigE Introduction The accelerated growth of fixed and mobile wireless broadband services

More information

Networking Topology For Your System

Networking Topology For Your System This chapter describes the different networking topologies supported for this product, including the advantages and disadvantages of each. Select the one that best meets your needs and your network deployment.

More information

ENSC 427- Communication Networks Spring 2015. Quality of service of the wireless networking standard over a Multi user environment.

ENSC 427- Communication Networks Spring 2015. Quality of service of the wireless networking standard over a Multi user environment. ENSC 427- Communication Networks Spring 2015 Quality of service of the wireless networking standard over a Multi user environment Group 9 Name: Saumya Sangal Email: ssangal@sfu.ca Name: Jasmine Liu Email:

More information

Wireless Broadband Access

Wireless Broadband Access Wireless Broadband Access (Brought to you by RMRoberts.com) Mobile wireless broadband is a term used to describe wireless connections based on mobile phone technology. Broadband is an electronics term

More information

Deploying the ShoreTel IP Telephony Solution with a Meru Networks Wireless LAN

Deploying the ShoreTel IP Telephony Solution with a Meru Networks Wireless LAN Deploying the ShoreTel IP Telephony Solution with a Meru Networks Wireless LAN Copyright 2005, Meru Networks, Inc. This document is an unpublished work protected by the United States copyright laws and

More information

Cisco Wireless Portfolio

Cisco Wireless Portfolio Cisco Wireless Portfolio Access Points Cisco Aironet 3600 Series Access Points with CleanAir Technology Cisco Aironet 3600 Series Access Points with Cisco CleanAir technology are the first 802.11n access

More information

Are you getting the speed that you pay for? Understanding Internet Speeds

Are you getting the speed that you pay for? Understanding Internet Speeds Screamin Fast Broadband and Great Sounding ephone Service January, 2015 Rev: 01.00 Are you getting the speed that you pay for? Understanding Internet Speeds Table of Contents Change Log... 2 Overview...

More information

the amount of data will grow. It is projected by the industry that utilities will go from moving and managing 7 terabytes of data to 800 terabytes.

the amount of data will grow. It is projected by the industry that utilities will go from moving and managing 7 terabytes of data to 800 terabytes. Before the Department of Energy Washington, D.C. 20585 In the Matter of Implementing the National Broadband Plan by Studying the Communications Requirements of Electric Utilities To Inform Federal Smart

More information

EKT 331/4 COMMUNICATION NETWORK

EKT 331/4 COMMUNICATION NETWORK UNIVERSITI MALAYSIA PERLIS SCHOOL OF COMPUTER & COMMUNICATIONS ENGINEERING EKT 331/4 COMMUNICATION NETWORK LABORATORY MODULE LAB 5 WIRELESS ACCESS POINT Lab 5 : Wireless Access Point Objectives To learn

More information

White Paper. D-Link International Tel: (65) 6774 6233, Fax: (65) 6774 6322. E-mail: info@dlink.com.sg; Web: http://www.dlink-intl.

White Paper. D-Link International Tel: (65) 6774 6233, Fax: (65) 6774 6322. E-mail: info@dlink.com.sg; Web: http://www.dlink-intl. Introduction to Voice over Wireless LAN (VoWLAN) White Paper D-Link International Tel: (65) 6774 6233, Fax: (65) 6774 6322. Introduction Voice over Wireless LAN (VoWLAN) is a technology involving the use

More information

Evaluating Wireless Broadband Gateways for Deployment by Service Provider Customers

Evaluating Wireless Broadband Gateways for Deployment by Service Provider Customers Evaluating Wireless Broadband Gateways for Deployment by Service Provider Customers Overview A leading provider of voice, video, and data services to the residential and businesses communities designed

More information

Wireless LANs vs. Wireless WANs

Wireless LANs vs. Wireless WANs White Paper Wireless LANs vs. Wireless WANs White Paper 2130273 Revision 1.0 Date 2002 November 18 Subject Supported Products Comparing Wireless LANs and Wireless WANs Wireless data cards and modules,

More information

NETGEAR N600 WIRELESS DUAL BAND GIGABIT ROUTER Premium Edition

NETGEAR N600 WIRELESS DUAL BAND GIGABIT ROUTER Premium Edition Reviewer s Guide for NETGEAR N600 WIRELESS DUAL BAND GIGABIT ROUTER Premium Edition (WNDR3800) Product Description (Learn More at www.netgear.com/wndr3800) The NETGEAR N600 Wireless Dual Band Gigabit Router

More information

The 2014 Wi-Fi Challenge

The 2014 Wi-Fi Challenge Network World and Robin Layland present The 2014 Wi-Fi Challenge Guide to Understanding and Choosing a Wi-Fi Solution for Today's Mobile Worlds 2014 What It Takes for Wi-Fi to Conquer the Mobile Revolution

More information

Unmatched RF Spectrum Analysis

Unmatched RF Spectrum Analysis Datasheet: AirMagnet Spectrum XT AirMagnet Spectrum XT is the industry s first professional spectrum analyzer solution that combines in-depth RF analysis with real-time WLAN information for quicker and

More information

The Wireless Last Hop WHITE PAPER. What is it?...and why is it important? networks. - Improving the way the world connects -

The Wireless Last Hop WHITE PAPER. What is it?...and why is it important? networks. - Improving the way the world connects - The Wireless Last Hop WHITE PAPER What is it?...and why is it important? - Improving the way the world connects - Background Today s Internet is wireless. Comcast, Level 3 and AT&T may provide the connections

More information

Delivering 4x4 MIMO for LTE Mobile Devices. March 2014. SkyCross Dual imat 4x4 MIMO Technology for LTE. Introduction

Delivering 4x4 MIMO for LTE Mobile Devices. March 2014. SkyCross Dual imat 4x4 MIMO Technology for LTE. Introduction Delivering 4x4 MIMO for LTE Mobile Devices SkyCross Dual imat 4x4 MIMO Technology for LTE March 2014 Introduction With the rise of low-cost smartphones on the horizon, creating differentiation by leveraging

More information

Best Practices for Deploying Wireless LANs

Best Practices for Deploying Wireless LANs Best Practices for Deploying Wireless LANs An overview of special considerations in WLAN implementations As wireless LANs (WLANs) continue to grow in popularity, particularly in enterprise networks, the

More information

INDEPENDENT TECHNOLOGY SPECIALISTS IN EDUCATION

INDEPENDENT TECHNOLOGY SPECIALISTS IN EDUCATION INDEPENDENT TECHNOLOGY SPECIALISTS IN EDUCATION CONSIDERATIONS FOR DEVELOPING AND DEPLOYING A MOBILE LEARNING STRATEGY Many schools we are working with are looking to extend their use of tablet technology,

More information

TCP Behavior across Multihop Wireless Networks and the Wired Internet

TCP Behavior across Multihop Wireless Networks and the Wired Internet TCP Behavior across Multihop Wireless Networks and the Wired Internet Kaixin Xu, Sang Bae, Mario Gerla, Sungwook Lee Computer Science Department University of California, Los Angeles, CA 90095 (xkx, sbae,

More information

An Update on Mobility in Today s Internet. Geoff Huston, APNIC Labs November 2015

An Update on Mobility in Today s Internet. Geoff Huston, APNIC Labs November 2015 An Update on Mobility in Today s Internet Geoff Huston, APNIC Labs November 2015 Why? Why should we be concerned about the mobile Internet environment? Why? Why should we be concerned about the mobile

More information

Where IT perceptions are reality. Test Report. OCe14000 Performance. Featuring Emulex OCe14102 Network Adapters Emulex XE100 Offload Engine

Where IT perceptions are reality. Test Report. OCe14000 Performance. Featuring Emulex OCe14102 Network Adapters Emulex XE100 Offload Engine Where IT perceptions are reality Test Report OCe14000 Performance Featuring Emulex OCe14102 Network Adapters Emulex XE100 Offload Engine Document # TEST2014001 v9, October 2014 Copyright 2014 IT Brand

More information

Quick Start. Nighthawk X8 AC5300 Tri-Band WiFi Router Model R8500. Package Contents. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA

Quick Start. Nighthawk X8 AC5300 Tri-Band WiFi Router Model R8500. Package Contents. NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We

More information

Questions and Responses. Q: Are Cefas open to looking at alternative vendors for the Access Points and surrounding solution?

Questions and Responses. Q: Are Cefas open to looking at alternative vendors for the Access Points and surrounding solution? Questions and Responses Q: Are Cefas open to looking at alternative vendors for the Access Points and surrounding solution? R: We are open to alternative vendors for the Access Points, but replacing the

More information

Octoshape s Multicast Technology Suite:

Octoshape s Multicast Technology Suite: : The Next-Gen CDN Alternative for Large-Scale, Cost-Optimized, Global HD Streaming HQ: +45 8833 4680 USA: +1 770 578 1686 Asia: +65 81125330 www.octoshape.com Table of Contents Core Transport...4 Making

More information

Lab Testing Summary Report

Lab Testing Summary Report Lab Testing Summary Report May 2007 Report 070529 Product Category: Network Acceleration Vendor Tested: Cisco Systems Product Tested: Cisco Wide Area Application Services (WAAS) v4.0.7 Key findings and

More information

Deploy WiFi Quickly and Easily

Deploy WiFi Quickly and Easily Deploy WiFi Quickly and Easily Table of Contents 3 Introduction 3 The Backhaul Challenge 4 Effortless WiFi Access 4 Rate Limiting 5 Traffic Filtering 5 Channel Selection 5 Enhanced Roaming 6 Connecting

More information

WiMAX. The Technology & the Business Case. July 2008

WiMAX. The Technology & the Business Case. July 2008 WiMAX The Technology & the Business Case July 2008 Introduction WiMAX is being hyped out of all proportion. Vested interests on the part of three primary players in the UK have resulted in enormous hyperbole

More information

FlexNetwork Architecture Delivers Higher Speed, Lower Downtime With HP IRF Technology. August 2011

FlexNetwork Architecture Delivers Higher Speed, Lower Downtime With HP IRF Technology. August 2011 FlexNetwork Architecture Delivers Higher Speed, Lower Downtime With HP IRF Technology August 2011 Page2 Executive Summary HP commissioned Network Test to assess the performance of Intelligent Resilient

More information

Network Technology Performance Evaluation Cisco Wireless High Availability. July 31, 2013

Network Technology Performance Evaluation Cisco Wireless High Availability. July 31, 2013 Network Technology Performance Evaluation Cisco Wireless High Availability July 31, 2013 Executive Summary Dramatic improvements in wireless networking combined with an increasingly important role for

More information

App coverage. ericsson White paper Uen 284 23-3212 Rev B August 2015

App coverage. ericsson White paper Uen 284 23-3212 Rev B August 2015 ericsson White paper Uen 284 23-3212 Rev B August 2015 App coverage effectively relating network performance to user experience Mobile broadband networks, smart devices and apps bring significant benefits

More information

The Value of Smart Antennas: Campus Mesh Network Performance Benchmark

The Value of Smart Antennas: Campus Mesh Network Performance Benchmark The Value of Smart Antennas: Campus Mesh Network Performance Benchmark January 2010 Copyright 2010, Novarum Inc. www.novarum.com 1.0 Overview... 1 Key Findings...2 2.0 Benchmark Methodology... 3 2.1 The

More information

CISCO SMB CLASS MOBILITY AND WIRELESS SOLUTIONS: THE RESPONSIVE WORKFORCE

CISCO SMB CLASS MOBILITY AND WIRELESS SOLUTIONS: THE RESPONSIVE WORKFORCE CISCO SMB CLASS MOBILITY AND WIRELESS SOLUTIONS: THE RESPONSIVE WORKFORCE BLUEPRINT Cisco Small and Medium Business Class Solutions Cisco offers small and medium-sized business customers a suite of intelligent

More information

Project to set up Wireless Network for Midwest Home Health Agency

Project to set up Wireless Network for Midwest Home Health Agency Project to set up Wireless Network for Midwest Home Health Agency Site Survey Report and Recommendations Submitted by: Asha B. Maghirang 12/8/2011 Midwest Home Health Agency is a home care provider, servicing

More information

IxVeriWave BYOD (Bring Your Own Device) Testing

IxVeriWave BYOD (Bring Your Own Device) Testing IxVeriWave BYOD (Bring Your Own Device) Testing Highlights High-scale controller load testing with a single test involving tens of thousands of clients and hundreds of APs Real-world deployment tests scale

More information