The range Point to highlight 90 series towards 90+ series

Transcription

1 PUSH BAR 90+

2 1 - Series Push Bar 90+ The range Point to highlight 90 series towards 90+ series 2 Marketing tools on a CD CE EN1125 certificate in PDF format Fire test certificate in PDF format English documentations in PDF format technical file in DWG format pictures and drawings in DXF, JPEG HD and LD

3 Toward the new Push Bar 90+ : New aesthetic Complete range : 1 side point version Vertical version 3 points version, side + vertical NEW Safety 60 mm touch pad projection = maximum free passage. Safety : Trigger bolt to block the bolt in door closed position Dogging version with cylinder: For non- fire rated doors Easy to fit : No handed Same fixing holes than 90 Push bar 2 hours fire rated 240 Hours salt spray resistance

4 Technical evolution 1 Push Pad and support 3 No visible screws or fixing hole ( on the back plate ). Silent aluminium pad Pad and pad support in aluminium Adjustment cutting : till 400 mm 2 - Push Bar 90+ head 1 Similar for points versions Side fixing cover Head cover and end fixing bracket cover in zamack Bigger trigger bolt for easy striker plate adjustment Vertical Epoxy coated rods covers Top and bottom latches working by pulling and with antipicking device Fitting Fixing dimensions unchanged Compatible with EN3000 / EN Finishing and accessories 3 mains epoxy finish: Silver, new silver metallic finish RAL 9022 Black, and white. Dogging version for European cylinder Striker plates support.

5 For single of double leaf door for timber, metal, PVC and glass doors Push Bar 90 1 point, 2 points Vertical Push Bar point, 2 points Vertical, 3 points, side and vertical

6 Outside trims compatibility. Exact retrofitting with 90 series. Outside trims Push Bar 90+ EN3000/PR2E series 1 point 2 points 3 points + EN2000 series

7 To note : The changes : The code item numbers The design, the metallic aluminium silver finish The cutting adjustment of push bar The packaging, the installation notice. The similar points with 90 series : EN1125 approved Applications, Fixing dimensions Compatibility with Outside trims

8 packaging

9 THE FITTING INSTRUCTIONS

10 JPM PUSH BAR 90+ FERMETURES ANTI-PANIQUE EN APPLIQUE 1/2/3 POINTS RIM PANIC EXIT DEVICE 1/2/3POINTS N Ind. C 0 1 CONTENU DE LA BOITE / CONTENT OF THE PACKAGE PREPARATION DE LA PORTE DOOR PREPARATION 0333 CPD EN1125: 1997 / A1 : Route de Paris AVERMES F MOULINS B 1 point: barre, capots, sachet visserie, gâches. 1 point: bar, covers, screw set, strikers. 2/3 points: barre, capots, sachet visserie, gâches, tringles, cache-tringles, loquets. 2/3 points: bar, covers, screw set, strikers, rods, rod covers, top and bottom latches. Les caractéristiques de sécurité de ce produit sont essentielles pour satisfaire à l'en1125. Aucune modification d'aucune sorte, autre que celles décrites dans ces instructions, n'est permise. L utilisation de ce produit certifié est limitée à une porte dont les caractéristiques n excèdent pas : - Hauteur maximale 2 300mm - Largeur maximale 1 300mm - Poids de la porte : maximum 200 kg. The characteristics of security are essential to satisfy to EN1125 requirements. No modification, except the ones described in the present instructions are allowed. The use of this certified product is limited to one door which characteristics do not exceed: -Maximum height 2300 mm - Maximum width 1300 mm - Maximum weight of the door 200 kg. 1. Axe horizontal = mm du sol fini. 1. Horizontal axis = 1035mm from finished floor. 2. Axe A (côté ouverture) 2. Axis A (on opening side) 1 ou 3 points 1 or 3 points version A1= 44 mm du bord de l huisserie (recouvrement) A1= 44 mm from the edge of the frame. A2= 22 mm du bord de l huisserie (affleurant) A2= 22 mm from the edge of the frame. 2 points A2 bis= 45 mm 2 points version A2 bis= 45 mm Axe B= minimum 30 mm du bord de l huisserie. Axis B= 30mm minimum from the edge of the frame. 3. Pointer et percer: 3. Mark and drill the door: H3 pour portes standard H3 for standard doors H3 et H4 pour portes COUPE-FEU H3 and H4 for fire-rated doors F1 Ø 15mm avec ensemble extérieur F1 Ø 15mm with an outside trim 4. Gabarit B sur l Axe B (côté paumelles): 4. B template on the A axis (hinge side): Pointer et percer H5. Mark and drill the door H5. 5. Relever la distance A-B Étape 2 5. Measure the distance A - B Step 2 Loquets haut et bas Étapes 5 et 6 Top and bottom latch Steps 5 et 6 1. Gabarit D1 pour portes avec recouvrement (A93). 1. D1 template for overlapping doors (A93). Gabarit D2 pour portes affleurantes. Tracer (A96). D2 template for flushed doors. Draw (A96). Pré percer aux emplacements indiqués(h1, H2, H8, H9) Pre-drill as indicated (H1, H2, H8, H9) 2. Gabarit E (loquet bas+gâche basse A92): 2. E template (bottom latch and striker A92): Positionner le gabarit par rapport au sol fini. Tracer. Position the template to the finished floor. Draw. Pré percer aux emplacements indiqués(h1, H2, H8, H9) Pre-drill as indicated (H1, H2, H8, H9) 3. Repère C Visser le support de cache tringle. 3. Mark C Screw the rod cover retainers clips. 2 MISE A LONGUEUR DE L ANTI-PANIQUE / ADJUSTMENT OF THE PANIC EXIT DEVICE Partie active de la barre = 60% minimum de la largeur effective de la porte. For the active regulation, it is compulsory that the active bar covers at least 60% of the door width. M4x15 Recoupe : AB+ 4 mm A1, A2, A2bis Éviter la disqueuse ou meuleuse. Utiliser 1 boîte à onglet pour faciliter la coupe de la barre. Coupe à l équerre et ébavurée. Évacuer la limaille. M4x15 A // Cut : AB + 4 mm A1, A2, A2bis Avoid the grinding machine. Use a mitre box to facilitate the cut of the bar. Cross to the square and deburred. Evacuate the filings. Distance AB + 4 mm

11 3 POSE DU FOUILLOT / INSTALLATION OF THE FOLLOWER Cas d utilisation avec série EN3000/EN2000/PR2E. Only in case of a use with an outside trim EN3000/EN2000/PR2E. N Ind. C M3x6 Auto taraudeuse Thread cutting screws Vérifier le bon fonctionnement de la Push Bar 90+. Check if the Push Bar 90+ works correctly. 4 INSTALLATION DE LA BARRE / FIXING OF THE BAR H3 5 Porte Coupe-feu Portes standard Fire rated door Standard doors H3 M6x30 Ø 5,5x32 H5/H6 H4 M6x30 Anti-panique H5/H6 M6x30 Ø 5,5x32 Panic Exit Device F1 Ø 15 Ø 15 F2 Ø 30 Ø 30 Gâche / Striker H1/H2 M4x35 Ø 3,5x16 Porte / Door Gabarit / Template Gâche / Striker Recouvrement / Overlapped A1 A98 Affleurant / Flushed A2 A99 Double vantail / Double leaf A2 bis A99 POSE DU LOQUET HAUT + GÂCHE HAUTE / INSTALLATION OF THE TOP LATCH + STRIKER IMPORTANT : Dans la cadre d un remplacement de produit, les gâches et loquets sont à changer. WARNING: In case of a push bar 90 replacement, strikers and latches must be changed. H4 H4 H3 Gâches hautes/ Top strikers A93 A96 H2/H1 H9 H8 D1 D2 Vérifier les positions: gâche + loquet. Check positions: striker + latch. 6 IMPORTANT : Dans la cadre d un remplacement de produit, les gâches et loquets sont à changer. WARNING: In case of a push bar 90 replacement, strikers and latches must be changed. POSE DU LOQUET BAS + GÂCHE BASSE / INSTALLATION OF THE BOTTOM LATCH + STRIKER E H9 Porte Coupe-feu Fire rated door Portes standard Standard doors H8/H9 M5x35 CZ Ø 4,2x32 H1/H2 M4x35 CZ Ø 4,2x32 H2/H1 H8 Sol fini / Finished floor

12 7 POSE DE LA TRINGLERIE / INSTALLATION OF THE RODS IMPORTANT : Dans la cadre d un remplacement de produit, les tringles sont à changer. WARNING: In case of a Push Bar 90 replacement, rods must be changed. N Ind. C Coupe Cut Tiges hautes / Top rod L= X-10mm Loquet haut/ bas Top/bottom latches Fixation + contrôle de fonctionnement Fixing + check if it works correctly maximum Tiges basses / Bottom rod L= Y-10mm H M6 maximum 8 IMPORTANT : Dans la cadre d un remplacement de produit, les cache-tringles sont à changer. WARNING: In case of a Push Bar 90 replacement, rod covers must be changed. POSE DES CACHE-TRINGLES + CAPOTS / INSTALLATION OF THE ROD COVERS + CASE COVERS Haut L=X Top L=X 3 points latéral, haut et bas 3 points lateral, top and bottom 2 points haut et bas: zoom 2 points top and bottom: zoom M3x6 3.9x16 M3x8 M4x15 Bas L=Y Bottom L=Y 3.9x16 M4x6 Vis auto taraudeuses Thread cutting screws M3x6 IMPORTANT : Vérifier le bon fonctionnement de la Push Bar WARNING : Check if the Push Bar 90+ works correctly.

13 N Ind. C 9 ENTRETIEN / MAINTENANCE IMPORTANT : graissage des gâches toutes les manoeuvres. WARNING : grease the strikes after openings. renouveler l opération tous les ans. repeat this operation each year. 10 VUE D ENSEMBLE / GENERAL VIEW Vis auto taraudeuses Thread cutting screws H9 H8 M3x6 3.9x16 X M3x8 M4x15 H5/H6 H3 H4 3.9x16 Y M4x6 H9 H8 M3x6

14 I DOOR CARACTERISTICS I Height : 2300 mm. width 1200 mm. Weight : 200kg. Touch Bar Type B Adjustable on site Active pad length 775mm or 1080mm adjustable till 400 mm. Fixing center distance 90 mm (45 mm from the follower) Spindle Cross type ( only for outside trim use ) Material Touch pad and support : epoxy coated. Rod covers and top an bottom covers : steel epoxy coated. Head cover and end bracket cover : zamack epoxy coated Under plate : steel zinc plated

15 I DIMENSIONS I I INSTALLATION I CE EN 1125 approved by AFNOR Certificate CE0333 CPD Fire rated doors > Single leaf (1 side point, 3 points, side and vertical ) Testing door Certificate Efectis France n 85-G7-T7 > Double leaf ( vertical ) Testing door Certificate Efectis France n 88-U238 A98 A99

16 I SIDE STRIKES AND SUPPORT I Configurations Available on request Over lapping door Flush door Dimensions Side type A98000 A99000 A13300 PVC support S A S A

17 I SIDE STRIKES AND SUPPORT I Configuration Available on request - Top strike Overlapping doors (timber, steel, PVC doors) Flush doors ( aluminium doors ) - Bottom strike A92000

18 Push Bar 90 + I OUTSIDE TRIMS I > Modularity PUSH BAR 90+ series can be combined with an outside trim EN3000 or PR2E. Center distance : 90 mm ( 45mm from each follower side) Single European profile cylinder 40mm (30/10) or Swiss profile on request.

19 Push Bar 90 + I OPTIONS I Dogging (non- doors only) Activated by single European cylinder ( 40mm). Kits Glass door kit KG9000. Extension kit S91000 For door height > mm Threaten rods (865 mm) and rod covers (867 mm). with connexion and fixing device and Isophonic joint. Door thickness 55 à 115mm KE2000 screws and cross spindle Door selector Series

20 Push Bar 90 + SINGLE LEAF DOOR DOUBLE LEAF DOOR I ITEM CODE NUMBERS I 1 side point Standard Dogging 900 mm width door PJ1000 PJ mm width door PJ1100 PJ Vertical points 900 mm width door PJ2000 PJ mm width door PJ2100 PJ points side and vertical 900 mm width door PJ3000 PJ mm width door PJ3100 PJ3101 I FINISHES I Silver -08, black-02, white -03. > Other epoxy coated on request, more than 100 colours ( RAL number to precise ).