Engineering Internship Opportunities

Size: px
Start display at page:

Download "Engineering Internship Opportunities"

Transcription

1 Engineering Internship Opportunities Overview Summer 2015

2 Internship Locations

3 Engineering Function Matrix Electrical Flight Industrial Materials Electrical System Design Wire Design, Install and Integration Electrical Design and Analysis Electrophysics Avionics Architecture Electronics Sensors & Communications Propulsion Air Breathing and Rocket Weight & Mass Properties Acoustics Configuration & Integration Flight Guidance, Navigation and Control Industrial Materials, Process & Physics *Limited opportunities may be available in other areas as well. Candidate eligibility for these opportunities will be determined at time of interview.

4 Engineering Function Matrix Mechanical/ Structural Software Systems Test Mechanical Structural Design Structural Analysis Manufacturing Real Time Software Software Engineering Systems Architecture, Integration & Design Customer Engineering Certification Regulatory Administration Test & Evaluation Liaison System Safety Tooling Payloads Product Support Reliability, Maintainability, System Health, Survivability, Vulnerability, Susceptibility, Testability Product Lifecycle Management Human System Integration Modeling, Simulation & Operational Analysis Communications & System Security Mechanical System Design & Safety Mechanical Hydraulics *Limited opportunities may be available in other areas as well. Candidate eligibility for these opportunities will be determined at time of interview.

5 Engineering Function Matrix Specialty Environmental / Heath & Safety Quality Facilities Equipment Security Technical Operations *Limited opportunities may be available in other areas as well. Candidate eligibility for these opportunities will be determined at time of interview.

6 Electrical Engineering Boeing Business Intern Program Responsibilities Preferred Majors Available Sites* Electrical System Design Applies electronic/electrical engineering principles, other engineering disciplines and scientific principles, for the design, analysis, validation and support of system, equipment and wiring. Wire Design, Install and Integration Electrical Design and Analysis Electrophysics Avionics Architecture Electronics Design wiring architecture, harnesses, and physical wire routing installations Design the physical installations of such equipment as antennas, lights, computers, and misc. electrical and electronic equipment Support the review, development and release of certification and qualification of test documents, conduct limited supervised laboratory testing, and attend Technical Collaboration meetings. Analyze supplier designs and tests/troubleshoots for cabin and network systems Develop and validate electromagnetic requirements for electrical\electronic systems, mechanical systems, interconnects and structures. Develop and document avionics system architecture, hardware and software designs and interface specifications. Test and validate to ensure system designs meet operational and functional requirements. Supports fielded hardware and software over the entire product lifecycle. Develops multi-card electronic designs consistent with requirements and specifications. Validate designs through various methods of review, testing and analysis. Investigate emerging technologies to develop concepts for future products. Engineering Majors: Electrical, Aero, Software/Computer Applied Science Majors: Physics, Mathematics Huntsville, AL; Mesa, AZ, El Segundo, CA,; Long Beach, CA; Seal Beach, CA; Huntington Beach, CA; Colorado Springs, CO; St. Louis, MO; Oklahoma City, OK; Ridley Park, PA; Houston; TX; Arlington; VA; Seattle, WA area Sensors & Communications Develop and validate requirements for various communication, sensor, electronic warfare and other electromagnetic systems and components.

7 Flight Engineering Aerodynamics Responsibilities Preferred Majors Available Sites* Design and analysis of aerodynamic/aerothermodynamic flight vehicles. Develop new and improve existing technologies, tools and processes to enhance technology readiness, improve vehicle performance and reduce cycle time and cost. Develop test requirements (e.g., wind tunnel, ground, flight, accident and incident and product support testing of aerodynamics or aeroheating/thermal characteristics) of flight vehicles. Propulsion Air Breathing and Rocket Define requirements for propulsion systems, auxiliary power systems and vehicle fuel and tank systems. Define, coordinate and control the functional and physical interfaces between the propulsion system and the vehicle. Document configurations and designs of propulsion sub-systems and components. Estimate or calculate system performance by use of various testing, analysis, modeling and simulation tools. Weight & Mass Properties Acoustics Develop weight, balance and mass properties data and define requirements. Provide vehicle or system configuration guidance. Estimate calculate and measure and verify mass, weight, stiffness and inertias of components, assemblies and completed vehicles or systems. Develop and maintain weight, balance and mass properties accounting systems and generating weight and balance reports. Define basic test programs for research in acoustics and applies acoustic analytical techniques in order to determine suppression system program results and adequacy to meet regulatory/specified noise requirements. Design of basic structural, airframe, nacelle and component elements of flight vehicles Engineering Majors: Aero, Mechanical Huntsville, AL; Mesa, AZ; Southern CA; Potomac Region; Configuration & Integration Synthesis of conceptual/preliminary aerospace/aeronautical vehicles and supports multi-disciplinary design cycle analysis and configuration data. Vehicle configuration design from customer requirements. Document trade studies, baseline management and change control. Flight Define and integrate the vehicle performance characteristics to meet mission performance requirements, including full product life cycle from initial vehicle concept definition, through design, test, validation and in-service support. Guidance, Navigation and Control Design of guidance, navigation and control systems for aircraft, missiles and spacecraft. Evaluate system level requirements to support flight control and mission or trajectory requirements definition. Translate functional requirements into specifications (hardware or software) and designs, specifies and evaluates systems and architectures to comply with company, customer and regulatory requirements. Engineering Majors: Aero, Electrical, Software

8 Industrial Engineering Responsibilities Preferred Majors Available Sites* Industrial Develops, implements and evaluates processes to optimize operational efficiency. Use mathematical, process and simulation models to optimize use and integration of facilities, equipment, materials, processes and personnel. Industrial Engineering Charleston, SC;

9 Materials Engineering Responsibilities Preferred Majors Available Sites* Materials, Process & Physics Structural (metallic, composite, ceramic) material characterization and development Nonmetallic materials and coatings development and evaluation Develop of aerospace component manufacturing processes Provide Technical support to Production Programs Transition technologies to new programs Material Science, Materials Engineering, Metallurgical Engineering, Chemistry, Chemical Engineering, Mechanical Engineering, Manufacturing Engineering and Manufacturing Technology Huntsville, AL Charleston, SC St. Louis, MO Seattle, WA Philadelphia, PA Mesa, AZ Oklahoma City, OK

10 Mechanical/Structural Engineering Mechanical Responsibilities Preferred Majors Available Sites* Develops, integrates and documents mechanical, fluid system, and thermal environment requirements Develops and maintains the mechanical, fluid systems, component and installation designs using 3-D Computer Aided Engineering tools Provides product definition to other engineering groups, production operations, suppliers and customers throughout the product lifecycle. Aerospace, Aeronautical Structural Design Structural Analysis Manufacturing Develops, integrates and documents structural requirements Develops, maintains and modifies structural and component designs, using 3-D CAD tools Provides product definition to other engineering groups, production operations, suppliers and customers throughout the product lifecycle. Develops, integrates and documents structural requirements to establish the system design Guides product design and verifies structural integrity by using analytical methods, finite element models/simulations and other analysis tools throughout the product lifecycle Integrates producibility and manufacturability knowledge, information and requirements into the manufacturing phase of the program Conceptualizes and designs the program architecture for build. Develops advanced manufacturing and engineering technologies Aerospace, Aeronautical Aerospace, Aeronautical, Civil Aerospace, Manufacturing Huntsville, AL; El Segundo, CA; Huntington Beach, CA; St. Louis, MO; Oklahoma City, OK; Ridley Park, PA; Potomac Region; Houston, TX; Liaison Develops solutions to product/process issues for production or technical in-service issues. Assists with the design of interim structural repairs to restore damaged structure to original design strength capability. Aerospace, Manufacturing Tooling Develops requirements and structural designs that translate into factory hardware tooling structures. Develops concepts, designs and analyzes factory equipment and tools to produce aerospace products. Aerospace, Manufacturing Payloads Documentation of structural and interior payload system requirements to establish the system design. Development, maintenance and modification of payload system and component designs Test to validate and verify systems and components meet requirements and specifications. Structural, Aero, Civil Product Support Research engineering drawings, maintenance documents, supplier and airline data to develop engineering data that ensures the capability of spare part products and services throughout the airplane lifecycle. Aeronautical/ Aerospace, Civil/Structural, Electrical

11 Software Engineering Responsibilities Preferred Majors Available Sites* Real Time Software Software Develop, maintains, and enhances complex and diverse software systems (e.g., processing-intensive analytics, novel algorithm development, manipulation of extremely lar ge data sets, real-time systems, and business management information systems) based upon documented requirements. Develop and maintains code and integrates software components into a fully functional software system. Test procedures and document test results to ensure software system requirements are met. Software/Computer, Electrical Huntsville, AL; Mesa, AZ, El Segundo, CA,; Long Beach, CA; Seal Beach, CA; Huntington Beach, CA; Colorado Springs, CO; St. Louis, MO; Oklahoma City, OK; Ridley Park, PA; Houston; TX; Arlington; VA;

12 Systems Engineering (1 of 2) Primary Responsibilities Preferred Majors Available Sites* Systems Architecture, Integration & Design Identify, validate, and allocate an integrated set of product requirements that results in a balanced design. Perform analysis, to ensure the design as a whole is well understood,under normal and non-normal operating conditions. Identify and manage risks Aero, Electrical, Software or Systems Huntsville, AL; Mesa, AZ, Southern CA; Colorado Springs, CO; St. Louis, MO; Ridley Park, PA; Houston; TX; Arlington; VA; Customer Engineering Support purchaser activities Analyze and improve processes Improve tool and data from various databases Civil, Chemical and Electrical Certification Define the regulatory certification requirements for a specific product Reviews for accuracy, facilitates necessary changes, tracks program to certification schedule and documents data correction Aerospace/Aeronautical, Chemical, Electrical, Math, Mechanical, Physics, or Systems Engineering Huntsville, AL; Mesa, AZ, Southern CA; Colorado Springs, CO; St. Louis, MO; Ridley Park, PA; Houston; TX; Arlington; VA; Regulatory Administration Coordinate the development of regulatory certification requirements, means of compliance, address certification risk items, and facilitate the resolution of technical issues. Aero, Electrical, Software or Systems Southern CA; System Safety Analyze accident, incident, event, and systems performance data to determine safety risk levels Identify and analyze potential safety hazards in design, operational procedures, maintenance practices and manufacturing processes. Coordinate analyses for Safety Review Board and Engineering Investigation Board reviews, and corrective actions through the functional design organizations and various government agencies. Aerospace/Aeronautical, Mechanical or Systems Reliability, Maintainability, System Health, Survivability, Vulnerability, Susceptibility, Testability Perform failure modes and effects analysis, fault tree analysis, 3-D human modeling for maintenance access, reliability and maintainability predictions, and component analysis to assess design characteristics. Gather and provide data to report validation and verification compliance activities, through analysis, inspection, demonstration or test, to assess adherence to specifications or regulatory requirements Basic knowledge of root cause analysis and corrective action, failure mode effect and criticality mission analysis for development and in service products. Aerospace/Aeronautical, Chemical, Electrical, Math, Mechanical, Physics, or Systems Huntsville, AL; Mesa, AZ, Southern CA; Colorado Springs, CO; St. Louis, MO; Oklahoma City, OK; Ridley Park, PA; Houston; TX; Arlington; VA;

13 Systems Engineering (2 of 2) Primary Responsibilities Preferred Majors Available Sites* Product Lifecycle Management Perform analysis of engineering design, manufacturing & product support requirements to develop and implement new process and tool technologies. Utilize an understanding of product design and build processes and applies standard methods to construct program planning models simulating the multifunctional dependencies of the product development lifecycle. Aero, Electrical, Systems Huntsville, AL; Mesa, AZ; Southern CA; St. Louis, MO Human System Integration Develop and maintain effective and efficient flight crew interface. Apply basic knowledge of human capabilities and constraints along with knowledge of the user and their environments to assist in the development, test and evaluation of safe and effective user interfaces Mechanical, Electrical, Aerospace Engineering (MS Human Factors) Chemical, Electrical, Math, Physics, or Systems Huntsville, AL; Mesa, AZ; Southern CA; Colorado Springs, CO; St. Louis, MO; Oklahoma City, OK; Ridley Park, PA; Houston; TX; Arlington; VA; Modeling, Simulation & Operational Analysis Applied knowledge of mathematical modeling and advanced mathematics Perform multi-disciplinary trade studies Perform operational effectiveness analysis methodologies (Mission & System) Ability to resolve Customer / Industry / Government requirements / interfaces / operational effectiveness and perform Lifecycle Cost Analysis Electrical, Software or Systems Huntsville, AL; Mesa, AZ; Southern CA; Colorado Springs, CO; St. Louis, MO; Oklahoma City, OK; Ridley Park, PA; Houston; TX; Arlington; VA; Communications & System Security Perform network communication concepts, principles, architectures Apply end-to-end knowledge of network transport technologies, systems, environments, services, protocols, performance monitoring and diagnostic analysis Apply knowledge of verification, validation, certification, qualification processes and procedures Work with system security domains (information assurance, anti-tamper, intrusion detection, software protection, software assurance, communications security, encryption, key management, countermeasures) Communication Systems, Electrical, Software or Systems Huntsville, AL; Mesa, AZ, Southern CA; Colorado Springs, CO; St. Louis, MO; Oklahoma City, OK; Ridley Park, PA; Houston; TX; Arlington; VA; Mechanical Systems Design & Analysis Aircraft Environmental Controls Systems (ECS) Definition - Architecture, Performance, Analysis, Certification, and Validation ECS Design, spatial integration, fabrication plans, and manufacturing coordination Supplier coordination and management requirements definition, technical oversight, & project management Aerospace, Aviation, Environmental; Emphasis in Fluid Mechanics, Thermodynamics, or Heat Transfer Mechanical Hydraulics Develops and functionally integrates mechanical, electronic, hydraulic, and thermal requirements to create the architectures and designs for the following aircraft systems: brake control/antiskid/autobrake, landing gear actuation, steering, cargo door actuation, and hydraulic power generation. Researches and investigates emerging technologies to ensure that our future system designs bring value to the aircraft and lead competition in marketplace. Mechanical or Electrical, Computer Science, Physics

14 Test Engineering Responsibilities Preferred Majors Available Sites* Test & Evaluation Participate in laboratory and flight test activities supporting commercial and military aerospace product test programs. Assist in mechanical, electrical, structural, aerodynamics, environmental and flight testing. Prepare test plans, schedules and documentation. Assist engineers with analysis of engineering designs to define testing requirements. Assist in the development of test procedures to preform the test within constraints of the test plan. Aeronautical, Aerospace, Electrical, Industrial, and Computer Science Huntsville, AL; Mesa, AZ; Southern CA; St. Louis, MO; Philadelphia, PA; Charleston, SC;

15 Specialty Engineering Responsibilities Preferred Majors Available Sites* Environmental / Heath & Safety Collect, review and analyze environmental data Assist in the preparation of environmental risk analysis Assist in the design, selection and operation of equipment to minimize hazards, ensure compliance and reduce costs Environmental Quality Assist with root cause analyses. Uses basic statistical methodologies to ensure specified levels of process capability are achieved, maintained or improved. Participates in the review of designs for manufacturability, producibility and inspectability. Electrical, Manufacturing, Systems, Aerospace Facilities Assist in developing basic conceptual designs, final designs, design criteria and estimates and provides maintenance support for all phases of the buildings systems, including material selections and equipment installations Ensure/aligns internal and Architectural and Engineering designs with customer requirements, building codes and applicable regulations Civil, Structural, Electrical, Architecture, Chemical, Industrial Southern CA; St. Louis, MO; Equipment Assist in development and review of specifications, conceptual and final designs, cost estimates and provide maintenance support for the procurement or modification of equipment systems (e.g. vehicles, cranes, work stands, flight line equipment, material handling etc.). Verify that all equipment and its installation is documented including hardware, software and the configuration of equipment. Electrical, Chemical Southern CA; St. Louis, MO; Security Technical Operations Assist in engineering intrusion detection and access control systems as well as researching new security technologies Electrical

AEROSPACE ENGINEERING SERIES, GS-0861

AEROSPACE ENGINEERING SERIES, GS-0861 TS-124 May 1993 General Schedule Position Classification Flysheet AEROSPACE ENGINEERING SERIES, GS-0861 Theodore Roosevelt Building 1900 E Street, NW Washington, DC 20415-8330 Classification Programs Division

More information

Position Descriptions. Aerospace

Position Descriptions. Aerospace Position Descriptions Aerospace Aerospace Engineering? Aeromechanics / Flight Control / Flight Qualities Engineer Predict, analyze, and verify air vehicle flight dynamics including aircraft aerodynamics,

More information

ELECTRICAL & POWER DISTRIBUTION

ELECTRICAL & POWER DISTRIBUTION ELECTRICAL & POWER DISTRIBUTION END-TO-END ELECTRICAL WIRING INTERCONNECTION SYSTEMS (EWIS) Complete EWIS System Design Harness Installation Design Reconciliation of Wiring Diagrams (2D) & Harness Design

More information

Christie Price Subcontract Administrator Lockheed Martin Corporation 12257 South Wadsworth Blvd. Littleton, CO 80125

Christie Price Subcontract Administrator Lockheed Martin Corporation 12257 South Wadsworth Blvd. Littleton, CO 80125 Functional Area 1 - Research and Development Support ISYS provides research and development, thermal design, analysis, research, planning and development support for the Thermal Protection System of the

More information

AOE Graduate Level Course Prerequisites

AOE Graduate Level Course Prerequisites AOE Graduate Level Course Prerequisites AOE 5024: Vehicle AOE 5135 5136 (ME 5135 5136): Vehicle Propulsion Prerequisites: AOE 3114 and ME 3134 or Graduate AOE 5034 (ESM 5304): Mechanical and Structural

More information

STUDENTS MUST APPLY AT WWW.JOINTEAMCATERPILLAR.COM TO BE CONSIDERED FOR AN ON-SITE INTERVIEW

STUDENTS MUST APPLY AT WWW.JOINTEAMCATERPILLAR.COM TO BE CONSIDERED FOR AN ON-SITE INTERVIEW Caterpillar MAJORS: Aerospace Engineering, Agricultural Engineering, Computer Science, Electrical Engineering, Engineering Mechanics/Engineering Physics, Industrial Engineering, Mechanical Engineering

More information

The Strategic Importance of Supply Chains Sir Michael Arthur President, UK & Ireland Boeing November 11, 2015

The Strategic Importance of Supply Chains Sir Michael Arthur President, UK & Ireland Boeing November 11, 2015 The Strategic Importance of Supply Chains Sir Michael Arthur President, UK & Ireland Boeing November 11, 2015 The statements contained herein are based on good faith assumptions and are to be used for

More information

Engineering & Technology High School. Course Description

Engineering & Technology High School. Course Description & Technology High School The Following Courses will be offered for the High School program under & Technology for the year 2013 & 14 year. These courses are the First Phase for the development of new Pathways,

More information

AP1000 European 18. Human Factors Engineering Design Control Document

AP1000 European 18. Human Factors Engineering Design Control Document 18.2 Human Factors Engineering Program Management The purpose of this section is to describe the goals of the AP1000 human factors engineering program, the technical program to accomplish these goals,

More information

AIRCRAFT WORK BREAKDOWN STRUCTURE (WBS) LEVELS (FROM MILITARY SPECIFICATION 881)

AIRCRAFT WORK BREAKDOWN STRUCTURE (WBS) LEVELS (FROM MILITARY SPECIFICATION 881) Appendix C AIRCRAFT WORK BREAKDOWN STRUCTURE (WBS) LEVELS (FROM MILITARY SPECIFICATION 881) Level 1 Level 2 Level 3 Aircraft System Air Vehicle (AV) System Engineering/ Program Management Airframe Propulsion

More information

Aeronautics. Airframe Maintenance Technician

Aeronautics. Airframe Maintenance Technician Airframe Maintenance Technician Program Description Practical and theoretical knowledge in basic maintenance techniques, plus the special requirements of either airframe or powerplant work. Upon satisfactory

More information

Bachelor of Science in Aviation Option in Aviation Management

Bachelor of Science in Aviation Option in Aviation Management Bachelor of Science in Aviation Option in Aviation Management Last Updated: July 24, 2014 Advising packet: List of courses Course descriptions Academic Planner Major Form GE Worksheet Aviation and Technology

More information

Services we provide. Tel: +1 561-623-8810 email: contracts@eetengineering.com http://www.eetengineering.com

Services we provide. Tel: +1 561-623-8810 email: contracts@eetengineering.com http://www.eetengineering.com EET Engineering specializes in providing timely, cost-efficient, quality engineering solutions to support the successful implementation of our customer s requirements. For over 24 years, our leadership

More information

Space Flight Project Work Breakdown Structure

Space Flight Project Work Breakdown Structure APPENDIX G. (WBS) Space Flight Project Work Breakdown Structure G.1 Introduction G.1.1 The Project Work Breakdown Structure (WBS) is a key element of project management. The purpose of a WBS is to divide

More information

Types of Engineering Jobs

Types of Engineering Jobs What Do Engineers Do? Engineers apply the theories and principles of science and mathematics to the economical solution of practical technical problems. I.e. To solve problems Often their work is the link

More information

CAT VIII WORKING DRAFT

CAT VIII WORKING DRAFT Category VIII Military Aircraft and Associated Equipment A. End Items, Systems, Accessories, Attachments, Equipment, Parts and Components 1. Fighter, bomber, attack, or specialized fixed or rotary wing

More information

Business Internship Opportunities

Business Internship Opportunities Business Internship Opportunities Function Overview Summer 2014 Internship Locations Key: Program Size = 200+ business interns = 40-50 business interns = 20-30 business interns = 5-19 business interns

More information

CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS

CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2015-2016 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November 1,

More information

CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS

CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Evaluations During the 2011-2012 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October

More information

Aerospace Engineer. information obtained from Occupational Outlook Handbook (www.bls.gov)

Aerospace Engineer. information obtained from Occupational Outlook Handbook (www.bls.gov) Aerospace Engineer Design, develop and test aircraft, spacecraft and missiles and supervise the manufacture of these products Develop new technologies for use in aviation, defense systems and space exploration

More information

COALITION OF VOCATIONAL AND REGULAR AVIATION MAINTENANCE TECHNICIAN EDUCATION

COALITION OF VOCATIONAL AND REGULAR AVIATION MAINTENANCE TECHNICIAN EDUCATION COALITION OF VOCATIONAL AND REGULAR AVIATION MAINTENANCE TECHNICIAN EDUCATION Ting Hsien Lan 1 Abstract - The Aviation Maintenance Technician training programs are divided into, vocational and regular,

More information

Israel s Aerospace Industry. Higher Faster Farther

Israel s Aerospace Industry. Higher Faster Farther Israel s Aerospace Industry Higher Faster Farther April 2013 Areas of Activity Civil/Commercial Aviation Space Applications Military & Defense Israel Aerospace Innovation Aviation Space UAV Gulfstream

More information

ISA CERTIFIED AUTOMATION PROFESSIONAL (CAP ) CLASSIFICATION SYSTEM

ISA CERTIFIED AUTOMATION PROFESSIONAL (CAP ) CLASSIFICATION SYSTEM ISA CERTIFIED AUTOMATION PROFESSIONAL (CAP ) CLASSIFICATION SYSTEM Domain I: Feasibility Study - identify, scope and justify the automation project Task 1: Define the preliminary scope through currently

More information

CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS

CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2013-2014 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October 27,

More information

ADVANCED MANUFACTURING: AIR TRANSPORTATION CAREER PATHWAY

ADVANCED MANUFACTURING: AIR TRANSPORTATION CAREER PATHWAY ADVANCED MANUFACTURING: AIR TRANSPORTATION CAREER PATHWAY The work of the Talent Pipeline Task Force was inspired by our community s existing assets in the areas of education and workforce. Members consist

More information

ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT

ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT Advanced Manufacturing I 5608 TEH600, TEH601 Grades 10-12 Dual credit through Ivy Tech Recommended Prerequisite: Introduction to Advanced Manufacturing and

More information

Composition Senior Technical Fellows 61 Technical Fellows 522 Associate Technical Fellows 1,575

Composition Senior Technical Fellows 61 Technical Fellows 522 Associate Technical Fellows 1,575 Fact Sheet Boeing Commercial Airplanes P.O. Box 3707 MC 03-XW Seattle, Washington 98124-2207 www.boeing.com One Boeing, One Team: Collaboration Drives Excellence, Results Boeing is the world s largest

More information

Engineering Disciplines

Engineering Disciplines Engineering Overview The Field - Engineering Disciplines - Preparation - Accreditation - Day in the Life - Earnings - Employment - Career Path Forecast - Professional Organizations The Field Engineers

More information

UNCLASSIFIED UNCLASSIFIED

UNCLASSIFIED UNCLASSIFIED DSTO Support to Accident & Incident Investigations DSTO Melbourne DSTO in Defence DSTO structure DSTO at a glance Budget 2011-12: $440m 11 research divisions 2600 staff 7 sites across Australia DSTO Support

More information

GUJARAT TECHNOLOGICAL UNIVERSITY

GUJARAT TECHNOLOGICAL UNIVERSITY Subject Code Subject Name Date Time Branch 01: Aeronautical Engineering 160101 Aerodynamics-II 24-05-2013 10:30 To 01:00 160102 Fundamentals of Jet Propulsion 27-05-2013 10:30 To 01:00 160103 Vibration

More information

Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim

Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim Virtual Prototyping of Aerospace Systems Using Integrated LMS Virtual.Lab and IMAGINE AMESim Joel Tollefson Imagine Inc. Aerospace Business Development Hans Van den Wijngaert LMS Product Manager Motion

More information

Marine engineering at the management level. Column 1 Column 2 Column 3 Column 4. Criteria for evaluating competence

Marine engineering at the management level. Column 1 Column 2 Column 3 Column 4. Criteria for evaluating competence Table A-III/2 Specification of minimum standard of for chief engineer officers and second engineer officers on ships powered by main propulsion machinery of 3,000 kw propulsion power or more Function:

More information

September 25, 2014 EFFECTIVE METHODS FOR SOFTWARE AND SYSTEMS INTEGRATION P R E S E N T E D B Y: D R. B O Y D L. S U M M E R S

September 25, 2014 EFFECTIVE METHODS FOR SOFTWARE AND SYSTEMS INTEGRATION P R E S E N T E D B Y: D R. B O Y D L. S U M M E R S September 25, 2014 EFFECTIVE METHODS FOR SOFTWARE AND SYSTEMS INTEGRATION P R E S E N T E D B Y: D R. B O Y D L. S U M M E R S 1 Software Engineer (Quality) Defense and Space The Boeing Company - Seattle,

More information

Federal Aviation Administration Standard Work Breakdown Structure (WBS) Version 3.1

Federal Aviation Administration Standard Work Breakdown Structure (WBS) Version 3.1 Federal Aviation Administration Standard Work Breakdown Structure (WBS) Version 3.1 July, 2003 Page Intentionally Left Blank INTRODUCTION This Federal Aviation Administration (FAA) Standard Work Breakdown

More information

Engineering Technology Disciplines

Engineering Technology Disciplines Engineering Technology Overview The Field - Engineering Technology Disciplines - Preparation - Accreditation - Day in the Life - Earnings - Employment - Career Path Forecast - Professional Organizations

More information

ClearEdge Power. Engineering Entry Level. Description Job Responsibilities: Apply online at: http://www.clearedgepower.com/about/careers/ Location:

ClearEdge Power. Engineering Entry Level. Description Job Responsibilities: Apply online at: http://www.clearedgepower.com/about/careers/ Location: Engineering Entry Level Company Order Number: 353 # of openings: 2 ClearEdge Power is seeking entry level candidates to join our organization. ClearEdge Power is delivering smart energy solutions today.

More information

Innovation Takes Off Rome, 28 th January 2014. Clean Sky 2 Information Day Fast Rotorcraft IADP Tiltrotor

Innovation Takes Off Rome, 28 th January 2014. Clean Sky 2 Information Day Fast Rotorcraft IADP Tiltrotor Innovation Takes Off Rome, 28 th January 2014 Clean Sky 2 Information Day Fast Rotorcraft IADP Tiltrotor From Clean Sky towards Clean Sky 2 CLEAN SKY has demonstrated to be a "game changer" in R&T focuses

More information

From Clean Sky towards Clean Sky 2

From Clean Sky towards Clean Sky 2 Clean Sky 2 Fast Rotorcraft IADP Next Generation Civil TiltRotor Innovation Takes Off Torino, 12 th May 2014 From Clean Sky towards Clean Sky 2 CLEAN SKY has demonstrated to be a "game changer" in R&T

More information

Diagnostic Software What your Developer Doesn t Know Ted Marz

Diagnostic Software What your Developer Doesn t Know Ted Marz Pittsburgh, PA 15213-3890 Diagnostic Software What your Developer Doesn t Know Ted Marz tfm@sei.cmu.edu A presentation of paper CMU/SEI-2005-TN-035 Integrated Diagnostics: Operational Missions, Diagnostic

More information

Aeronautics AERO, FLTEC, ATCAD

Aeronautics AERO, FLTEC, ATCAD Aeronautics AERO, FLTEC, ATCAD Degrees: A.S. Air Traffic Control A.S. Aircraft Dispatcher A.S. Airframe A.S. Combined Airframe and Powerplant A.S. Flight Technology A.S. Powerplant Certificates of Achievement:

More information

AVIATION SPECIALIST. Inspects aviation schools for conformance with state laws, rules, and regulations.

AVIATION SPECIALIST. Inspects aviation schools for conformance with state laws, rules, and regulations. MICHIGAN CIVIL SERVICE COMMISSION JOB SPECIFICATION AVIATION SPECIALIST JOB DESCRIPTION Employees in this job complete and oversee a variety of professional assignments to promote aviation education and

More information

Program Planning Summary For a Masters Program in Aerospace Engineering. Submitted by. University of South Carolina, Columbia

Program Planning Summary For a Masters Program in Aerospace Engineering. Submitted by. University of South Carolina, Columbia Program Planning Summary For a Masters Program in Aerospace Engineering Master of Science with a Major in Aerospace Engineering Master of Engineering with a Major in Aerospace Engineering Submitted by

More information

Engineering Technicians Career Information

Engineering Technicians Career Information Ingredients for College & University Success Engineering Technicians Career Information At School Soup we want to help you on your Engineering Technicians Career path. Here in our Engineering Technicians

More information

College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings

College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings College of Engineering Distance Education Graduate Degree Programs, Degree Requirements and Course Offerings Master of Engineering Program Requirements: The student must complete a total of 30 credit hours

More information

ENGINEERING COUNCIL OF SOUTH AFRICA. Discipline-specific Training Guideline for Candidate Engineers in Aeronautical Engineering

ENGINEERING COUNCIL OF SOUTH AFRICA. Discipline-specific Training Guideline for Candidate Engineers in Aeronautical Engineering ENGINEERING COUNCIL OF SOUTH AFRICA Standards and Procedures System Discipline-specific Training Guideline for Candidate Engineers in Aeronautical Engineering Status: Approved by Registration Committee

More information

Student Academic Achievement Committee (SAAC) Standardized Report Form

Student Academic Achievement Committee (SAAC) Standardized Report Form Student Academic Achievement Committee (SAAC) Standardized Report Form INTRODUCTION Program/Discipline Title: Aviation Maintenance Technology Time Period: spring 2011, summer 2011, fall 2011 Program goals,

More information

Domain 1 The Process of Auditing Information Systems

Domain 1 The Process of Auditing Information Systems Certified Information Systems Auditor (CISA ) Certification Course Description Our 5-day ISACA Certified Information Systems Auditor (CISA) training course equips information professionals with the knowledge

More information

Applying 50 years of Aerospace Systems Engineering Lessons Learned to the Oil Field Technical Challenges of Today

Applying 50 years of Aerospace Systems Engineering Lessons Learned to the Oil Field Technical Challenges of Today Applying 50 years of Aerospace Systems Engineering Lessons Learned to the Oil Field Technical Challenges of Today Rick Taylor General Manager, Houston Operations Aerojet Rocketdyne - Extreme Engineering

More information

6500m HOV Project Stage 1: A-4500 HOV

6500m HOV Project Stage 1: A-4500 HOV 6500m HOV Project Stage 1: A-4500 HOV Systems Engineering, Integration & Testing Plan Document Control No.: 0000000 01-November-2009 WOODS HOLE OCEANOGRAPHIC INSTITUTION WOODS HOLE, MA 02543 Document Control

More information

What can I do with a degree in... Engineering

What can I do with a degree in... Engineering What can I do with a degree in... Engineering The Department of Physics offers a spectrum of courses reflective of both the integral character of physics in the liberal arts curriculum and its essential

More information

Aerospace Engineering

Aerospace Engineering West Virginia University 1 Aerospace Engineering Aerospace Engineering Aerospace travel, space exploration, and flight of manned or unmanned vehicles continue to gain significance. Aerospace engineering

More information

What can I do with this degree?

What can I do with this degree? What can I do with this degree? ANY ENGINEERING DISCIPLINE Production Sales and Marketing Management Consulting Research and Development Teaching Law AEROSPACE Propulsion Fluid Mechanics Thermodynamics

More information

PI Team Masters Forum - 2. The Successful Team Composition Engineering of Systems

PI Team Masters Forum - 2. The Successful Team Composition Engineering of Systems National Aeronautics and Space Administration PI Team Masters Forum - 2 The Successful Team Composition Engineering of Systems Orlando Figueroa Deputy Center Director for Science and Technology NASA/Goddard

More information

Canadian Technology Accreditation Criteria (CTAC) INDUSTRIAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC)

Canadian Technology Accreditation Criteria (CTAC) INDUSTRIAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC) Canadian Technology Accreditation Criteria (CTAC) INDUSTRIAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving

More information

AC 20-148 REUSABLE SOFTWARE COMPONENTS

AC 20-148 REUSABLE SOFTWARE COMPONENTS AC 20-148 REUSABLE SOFTWARE COMPONENTS December 7, 2004 12/7/04 AC 20-148 CONTENTS Paragraph Title Page 1. Purpose....1 2. Motivation for this Guidance....1 3. Document Overview...1 4. General Guidelines

More information

http://www.bls.gov/oco/ocos112.htm Engineering Technicians

http://www.bls.gov/oco/ocos112.htm Engineering Technicians http://www.bls.gov/oco/ocos112.htm Engineering Technicians * Nature of the Work * Training, Other Qualifications, and Advancement * Employment * Job Outlook * Projections Data * Earnings * OES Data * Related

More information

Chapter 2. Basic Airplane Anatomy. 2008 Delmar, Cengage Learning

Chapter 2. Basic Airplane Anatomy. 2008 Delmar, Cengage Learning Chapter 2 Basic Airplane Anatomy Objectives Identify components of basic aircraft anatomy Understand aircraft size and weight categories List different types and examples of General aviation aircraft Military

More information

GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. GS-23F-0126S

GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. GS-23F-0126S GSA SCHEDULE 871 PROFESSIONAL ENGINEERING SERVICES (PES) Contract No. 200 YELLOW PLACE ROCKLEDGE, FL 32955 PHONE 321-631-3550 FAX 321-631-3552 www.mainstream-engr.com TABLE OF CONTENTS CORPORATE EXPERIENCE...3

More information

Aeronautical Engineering

Aeronautical Engineering Aeronautical Engineering What it means to be an Aeronautical Engineer! Gajendra Circle Initiative (GCI) from IIT Madras Alumni Association and The Hindu Group May 15, 2010 Compiled by: Adayana Learning

More information

Aviation Academy MAGNET PROGRAM Course Guide

Aviation Academy MAGNET PROGRAM Course Guide DENBIGH HIGH SCHOOL & Aviation Academy MAGNET PROGRAM Course Guide Aviation Academy 902-B Bland Blvd. Newport News, VA 23602 757-886-2745 http://avi.nn.k12.va.us Dr. Aaron L. Smith Program Director aaron.smith@nn.k12.va.us

More information

Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D.

Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D. Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology Graduate Program (S.M., Ph.D., Sc.D.) Field: Space Propulsion Date: October 15, 2013 1. Introduction

More information

MMAE Co- terminal Degrees Summary

MMAE Co- terminal Degrees Summary MMAE Co- terminal Degrees Summary Co- terminal Degrees within MMAE (MAS = master of engineering, i.e. non- thesis masters): BS Mechanical Engineering + MAS Mechanical and Aerospace Engineering BS Aerospace

More information

MECHANICAL ENGINEERING

MECHANICAL ENGINEERING MECHANICAL ENGINEERING THE MECHANICAL ENGINEERING MAJOR AT A GLANCE: If you want to design and build things, then you should consider majoring in Mechanical Engineering. Mechanical Engineering is, more

More information

Oct 2016. May 2016. Dec 2016. Jun 2016. Sept 2016. Jul 2016. Nov 2016. Aug 2016

Oct 2016. May 2016. Dec 2016. Jun 2016. Sept 2016. Jul 2016. Nov 2016. Aug 2016 Undergraduate Master Course Schedule ERAU Worldwide-Department of Online Learning offers undergraduate Online courses twelve terms a year (Terms have monthly starts). All undergraduate Online courses are

More information

Courses MODEL CH-47. Course Length: 1 Week Maximum Student Load: 15 AIRCRAFT FAMILIARIZATION H7-U-00. Domestic: $12,600 International: $21,000

Courses MODEL CH-47. Course Length: 1 Week Maximum Student Load: 15 AIRCRAFT FAMILIARIZATION H7-U-00. Domestic: $12,600 International: $21,000 Courses MODEL CH-47 AIRCRAFT FAMILIARIZATION H7-U-00 Course Length: 1 Week Maximum Student Load: 15 Domestic: $12,600 International: $21,000 IN-PLANT COST: $7,600 Upon successful completion, the student

More information

Taipei Economic and Cultural Representative Office in the United States PATRIOT Advanced Capability-3 Guided Missiles

Taipei Economic and Cultural Representative Office in the United States PATRIOT Advanced Capability-3 Guided Missiles Transmittal No. 08-56 PATRIOT Advanced Capability-3 Guided Missiles possible Foreign Military Sale to Taiwan of 330 PATRIOT Advanced Capability (PAC-3) missiles, as well as associated equipment and services.

More information

CRITERIA FOR ACCREDITING ENGINEERING PROGRAMS

CRITERIA FOR ACCREDITING ENGINEERING PROGRAMS CRITERIA FOR ACCREDITING ENGINEERING PROGRAMS Effective for Evaluations During the 2009-2010 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November 1, 2008

More information

Innovation Takes Off

Innovation Takes Off Innovation Takes Off Clean Sky 2 General Information Day 28 November 2013, Lisbon SAT Transversal Activities Aniello Cozzolino, Piaggio Aero Industries Zdenek Mikulka, Evektor Innovation Takes Off European

More information

STAMP Based Safety Analysis for Navigation Software Development Management

STAMP Based Safety Analysis for Navigation Software Development Management STAMP Based Safety Analysis for Navigation Software Development Management Xu Xiaojie Zhong Deming Ph. D Candidate for Software Safety Email: buaaxuxiaojie@163.com School of Reliability and Systems Engineering,

More information

Aviation Technology Pathway Model. January 2015

Aviation Technology Pathway Model. January 2015 Aviation Technology Pathway Model January 2015 Coursework at Rockford Public Schools 205 EMITT Academy (Engineering, Manufacturing, Industrial and Trades Technology) Transportation Technology Pathway 4

More information

Enterprise Capabilities Descriptions

Enterprise Capabilities Descriptions 1 SYSTEMS ENGINEERING & INTEGRATION 6 COMMUNICATIONS SYSTEMS 11 LIFECYCLE SYSTEMS ENGINEERING 12 LIFECYCLE SYSTEMS INTEGRATION 13 MISSION INTEGRATION 14 DISCIPLINES 15 DOMAINS 2 CYBER 21 CYBER STRATEGIC

More information

Expectations for a New Aeronautical Engineering Technology Program

Expectations for a New Aeronautical Engineering Technology Program Session ENT 106-086 Expectations for a New Aeronautical Engineering Technology Program Renee M. Hendricks, David L. Stanley Aviation Technology Department Purdue University rmhendri@purdue.edu / dlstanley@purdue.edu

More information

KY Valid Course List

KY Valid Course List KY Valid Course List Kentucky Uniform Academic Course Codes 704 KAR 3:540 states the following: Section 1. (1) Local districts and schools shall use uniform academic course codes, listed and described

More information

DATA REQUIREMENTS DESCRIPTION (DRD)

DATA REQUIREMENTS DESCRIPTION (DRD) DATA REQUIREMENTS DESCRIPTION (DRD) 1. DPD NO.: XXX ISSUE: Draft 2. DRD NO.: STD/EDAL 3. DATA TYPE: 3 4. DATE REVISED: 5. PAGE: 1/3 6. TITLE: Engineering Drawings and Associated Lists 7. DESCRIPTION/USE:

More information

AEROSPACE QUALITY MANAGEMENT SYSTEM - 9100

AEROSPACE QUALITY MANAGEMENT SYSTEM - 9100 AEROSPACE QUALITY MANAGEMENT SYSTEM - 9100 Dale K. Gordon Rolls-Royce Royce North America Past Chairman Americas Aerospace Quality Group April 11th, 2003 Edinburgh General Assembly 1 of 24 Aerospace Quality

More information

Aerion and Airbus Group, Inc. Announce New Agreement, Expanded Collaboration

Aerion and Airbus Group, Inc. Announce New Agreement, Expanded Collaboration P R E S S I N F O R M A T I O N Aerion and Airbus Group, Inc. Announce New Agreement, Expanded Collaboration More North American-based Airbus Group, Inc. resources made available to bring the supersonic

More information

Maintenance Performance Toolbox

Maintenance Performance Toolbox Maintenance Performance Toolbox by Rex Douglas, Product Manager, Maintenance Performance Toolbox the the toolbox is Designed is to to help help operators improve system troubleshooting and and reduce repair

More information

Dynamic Concepts, Inc.

Dynamic Concepts, Inc. Dynamic Concepts, Inc. GENERAL SERVICES ADMINISTRATION Federal Acquisition Service 2015 Authorized Federal Supply Schedule Price List (In Accordance with Modification PS-0018 - Prices Effective 03/05/2015)

More information

Commercial Price List

Commercial Price List Commercial Price List Effective May 14, 2010 Scope The Labor rates listed herein are based on the calendar year and applicable to Time-and-Material or Firm Fixed Price proposals for the following commercial

More information

MSC Aerospace Solutions: Optimizing the Design-to-Certification Process

MSC Aerospace Solutions: Optimizing the Design-to-Certification Process MSC Aerospace Solutions: Optimizing the Design-to-Certification Process Aerospace Business Unit The MacNeal-Schwendler Corporation Los Angeles, California USA Abstract This paper describes MSC's solutions

More information

Technical Training School Locations

Technical Training School Locations MECHANICAL 1A131 Flight Engineer Kirtland AFB, NM; Lackland AFB, TX; Fairchild AFB, WA 2 1A731 Aerial l Gunner Lackland AFB, TX; Fairchild hldafb, WA; Pensacola AFB, FL; Kirtland AFB, NM 2.5 1C131 Air

More information

What s Coming up at the Johnson Space Center

What s Coming up at the Johnson Space Center What s Coming up at the Johnson Space Center Greater Houston Business Procurement Forum - January 26, 2016 Charles Williams Senior Small Business Specialist Human Health and Performance Contract (HHPC)

More information

STATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION

STATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION STATE OF NEVADA Department of Administration Division of Human Resource Management CLASS SPECIFICATION TITLE GRADE EEO-4 CODE MASTER IT PROFESSIONAL II 43 B 7.909 SERIES CONCEPT Master Information Technology

More information

Lessons Learned during the Refurbishment and Testing of an Observatory after Longterm

Lessons Learned during the Refurbishment and Testing of an Observatory after Longterm Lessons Learned during the Refurbishment and Testing of an Observatory after Longterm Storage GSFC 2015 John Hawk, Sharon Peabody, and Richard Stavely NASA Goddard Space Flight Center Background The Triana

More information

Proposal for apprentice training in. South Africa. A cut above the rest, cause we train you best

Proposal for apprentice training in. South Africa. A cut above the rest, cause we train you best Proposal for apprentice training in South Africa A cut above the rest, cause we train you best Why invest in ITC? ITC was founded in 2007. We have provided training for major airlines in Africa such as

More information

COMPANY PROFILE YOUR PREFERRED PARTNER IN AEROSPACE TECHNOLOGIES SUBSIDIARIES. AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic

COMPANY PROFILE YOUR PREFERRED PARTNER IN AEROSPACE TECHNOLOGIES SUBSIDIARIES. AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic COMPANY PROFILE AERO Vodochody AEROSPACE a.s., Odolena Voda, Czech Republic - The largest aerospace manufacturer in the Czech Republic - One of the oldest aerospace manufacturers in the world (*1919) -

More information

Aerospace Cyber Physical Systems Challenges in Commercial Aviation

Aerospace Cyber Physical Systems Challenges in Commercial Aviation Aerospace Cyber Physical Systems Challenges in Commercial Aviation Dr. Susan X. Ying, Dr. Steven Venema, Dr. David Corman, Dr. Ian Angus, and Dr. Radhakrishna Sampigethaya Boeing Research and Technology

More information

Program Update June 2015. G500, G600 Program Update 06.15

Program Update June 2015. G500, G600 Program Update 06.15 Program Update June 2015 G500, G600 Program Update 06.15 All-New Gulfstream G500 and G600 All new, best-in-class aircraft that build upon Gulfstream s technology leadership Unmatched high-speed range capability

More information

ENGINEERING What can I do with this major?

ENGINEERING What can I do with this major? ENGINEERING What can I do with this major? ANY ENGINEERING DISCIPLINE Research and Development Design Production Operations Management Teaching Consulting Sales and Marketing Law Manufacturing Healthcare

More information

ENGINEERING YOUR FUTURE. Dr. Vlasov 1

ENGINEERING YOUR FUTURE. Dr. Vlasov 1 ENGINEERING YOUR FUTURE Dr. Vlasov 1 Outline 1. Importance of Engineering 2. Major Engineering Disciplines 3. Engineering Functions 4. Engineering Majors 5. Statistical Overview Dr. Vlasov 2 Importance

More information

What methods are used to conduct testing?

What methods are used to conduct testing? What is testing? Testing is the practice of making objective judgments regarding the extent to which the system (device) meets, exceeds or fails to meet stated objectives What the purpose of testing? There

More information

Compendium for National Technology Benchmarks - NTB 2010 TECHNOLOGIST

Compendium for National Technology Benchmarks - NTB 2010 TECHNOLOGIST Compendium for National Technology Benchmarks - NTB 2010 TECHNOLOGIST Reg d trademark of Canadian Council of Technicians and Technologists GENERAL PROGRAM CRITERIA FOR ALL DISCIPLINES The National Technology

More information

Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN

Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN Reg d trademark of Canadian Council of Technicians and Technologists GENERAL PROGRAM CRITERIA FOR ALL DISCIPLINES Technician Level

More information

INDEPENDENT VERIFICATION AND VALIDATION OF EMBEDDED SOFTWARE

INDEPENDENT VERIFICATION AND VALIDATION OF EMBEDDED SOFTWARE PREFERRED RELIABILITY PRACTICES PRACTICE NO. PD-ED-1228 PAGE 1 OF 6 INDEPENDENT VERIFICATION AND VALIDATION OF EMBEDDED SOFTWARE Practice: To produce high quality, reliable software, use Independent Verification

More information

CAREER TRACKS PHASE 1 UCSD Information Technology Family Function and Job Function Summary

CAREER TRACKS PHASE 1 UCSD Information Technology Family Function and Job Function Summary UCSD Applications Programming Involved in the development of server / OS / desktop / mobile applications and services including researching, designing, developing specifications for designing, writing,

More information

Enhanced Project Management Tool for Complex Systems

Enhanced Project Management Tool for Complex Systems Enhanced Project Management Tool for Complex Systems This invention is a system for managing a project that includes multiple tasks and workers, with monthly task schedule, and budget reports. Practical

More information

CRITERIA FOR ACCREDITING ENGINEERING PROGRAMS

CRITERIA FOR ACCREDITING ENGINEERING PROGRAMS CRITERIA FOR ACCREDITING ENGINEERING PROGRAMS Effective for Reviews During the 2013-2014 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October 27, 2012 Engineering

More information

Recommended Program of Study for: Transportation, Distribution & Logistics

Recommended Program of Study for: Transportation, Distribution & Logistics Career Cluster: Pathway Name: s Algebra I Geometry Algebra II or Math Elective Physical Science Biology Repair A Repair B Repair C Repair D A B C D Master Senior Career Pathway Project Career Cluster:

More information

Position Classification Standard for Aviation Safety Series, GS-1825. Table of Contents

Position Classification Standard for Aviation Safety Series, GS-1825. Table of Contents Position Classification Standard for Aviation Safety Series, GS-1825 Table of Contents SERIES DEFINITION... 2 OCCUPATIONAL INFORMATION... 2 EXCLUSIONS... 3 TITLES AND SPECIALIZATIONS... 4 CLASSIFICATION

More information

Guidance for the Quality Assurance of Fire Protection Systems

Guidance for the Quality Assurance of Fire Protection Systems Guidance for the Quality Assurance of Fire Protection Systems Prepared for: Office of Energy Research Office of Environment, Safety and Health Technical Support Prepared by: Roy F. Weston, Inc. October

More information