Arcade Challenge Basketball

Transcription

1 B0665 Instructions Please keep this instruction sheet for future reference, as it contains important information. Adult assembly is required. Tool needed for assembly: Phillips screwdriver (not included). This product requires three, alkaline "C" (LR14) batteries for operation (not included). Water or sand is needed to fill the base (not included). IMPORTANT! Backboard height should be adjusted only by an adult. Arcade Challenge Basketball

2 Parts Part not shown: Label Sheet Electronic Backboard 2 Rims 2 Score Paddles Note: Please note the sizes of the screws shown below and the assembly steps they will be used to fasten parts. Upper Post 2 Ball Returns #6 x /4" Screw - 12 (Use only to fasten the ball returns to the rims - Step 4.) #8 x /4" Screw - 4 (Use only to fasten the rims to the electronic backboard - Step 7.) Lower Post #10 x 1" Screw - 2 (Use only to fasten the electronic backboard to the upper post - Step 8.) #8 x 2 1 /2" Screw - 2 (Use only to fasten the score paddles to the electronic backboard - Step 9.) Plug 2 Basketballs ALL SHOWN ACTUAL SIZE Note: Tighten and loosen all screws with a Phillips screwdriver. Do not over-tighten the screws. Base Printed in Mexico Fisher-Price, Inc., a subsidiary of Mattel, Inc., East Aurora, NY U.S.A. 200 Mattel, Inc. All Rights Reserved. and designate U.S. trademarks of Mattel, Inc. 2 B0665pr-0920

3 Assembly CAUTION This product contains small parts in its unassembled state. Adult assembly is required. Upper Post IMPORTANT! Assembly of the lower post to the base is permanent. Follow the instructions in this step carefully. Lower Post Lever Lever Rib Groove Plug Base 1 Position the base on a flat surface with the plug facing you. Align the rib on the bottom of the lower post with the groove in the opening of the base. Insert and push the lower post down, using a circular motion, until it snaps into place. Hint: For easier assembly, apply liquid soap (or rub a candle or bar soap) around the end of the lower post, especially on the corners and the inside of the opening in the base. If assembling inside, place a tarp under the base to protect the floor surface. 2 Push both levers down on the lower post. Insert the upper post into the lower post, as shown. Push the upper post completely into the lower post. Lift the levers to secure the upper post in its lowest position (4 feet). Hint: Height adjustment instructions are on page 6.

4 Assembly Hint: Apply labels # before applying label # Hint: Apply labels # before applying label #2. 2 Slots 5 6 Net Assemblies Hint: Apply label #4 before applying labels #5 and #6. Wipe the backboard with a clean, soft dry cloth to remove any dust or oils. Apply the labels as shown in the illustration. For best results, avoid repositioning labels once they are applied. 5 Insert and "snap" the net assemblies into the backboard slots. Ball Return Groove Rim 4 #6 x /4" Screw - 12 Bend the ends of each ball return up. Fit the ends of a ball return to the indents in a rim. Insert a #6 x /4" screw into each end of the ball return and tighten. Repeat this procedure to assemble the other ball return to the other rim. 4 6 Back View Face the back of the base. Position the backboard so that the back is facing you. Insert and "snap" the backboard into the groove in the upper post.

5 Assembly #8 x 2 1 /2" Screw - 2 Hinge Hinge 7 #10 x 1" Screw - 2 Score Paddle Score Paddle Insert the #10 x 1 screws into the backboard and tighten. 9 Locate the hinges just below each rim. Fit the score paddles to the hinges on the backboard. Insert a #8 x 2 1 /2" screw into the outside edge of each hinge and tighten. 8 #8 x /4" Screw - 4 Insert four #8 x /4" screws into the backboard and tighten. 10 Plug 5 Bend the "T" end of the plug and insert it into the hole in the base. Fill the base with water or approximately 50 lbs (22.5 kg) of sand (water and sand not included). Fit the plug into the base.

6 Adjusting Backboard Height Battery Installation IMPORTANT! Only an adult should adjust backboard height. Also, make sure children are not standing below the backboard when adjusting height. 1.5V x "C" (LR14) SHOWN ACTUAL SIZE Lever Lever Locate the battery compartment door on the back of the backboard. Loosen the screws and remove the door. Insert three, C alkaline batteries into the compartment and replace the door. Tighten the screw. Back View To raise: Lift the upper post and push the levers into the desired height slots. To lower: While holding the upper post, push the levers down. Lower the upper post to the desired height (4, 5 or 6 feet). Lift and push the levers into the slots on the post. Battery Safety Information Batteries may leak fluids that can cause a chemical burn injury or ruin your toy. To avoid battery leakage: Do not mix old and new batteries or batteries of different types: alkaline, standard (carbon-zinc) or rechargeable (nickel-cadmium). Insert batteries as indicated inside the battery compartment. Remove batteries during long periods of non-use. Always remove exhausted batteries from the toy. Dispose of batteries safely. Do not dispose of batteries in a fire. The batteries may explode or leak. Never short-circuit the battery terminals. Use only batteries of the same or equivalent type as recommended. Do not charge non-rechargeable batteries. Remove rechargeable batteries from the toy before charging. If removeable, rechargeable batteries are used, they are only to be charged under adult supervision. 6

7 Ready Go! Player 1 Score Timer Player 2 Score advanced game play! P.I.G. or H.O.R.S.E. Free Throw Mode Follow the Leader Slide to turn power One-On-One Head-to- On or Off O One-On-One Score the most points before time runs out. Beginner Watch the timer you and a challenger have 60 seconds to score the most baskets. Advanced Press the Beginner/Advanced button on the electronic backboard. Shoot quickly - you and player 2 have only 0 seconds to score the most baskets. P.I.G. (beginner) and H.O.R.S.E (advanced) Miss a shot, take a letter. Spell P.I.G. or H.O.R.S.E. and you re out! Beginner Shoot a basket. If you make it, great job! Now it s player 2 s turn to match the shot. If you don t make a basket, you get a letter! Game play continues until a player spells P.I.G. and is out! Advanced Press the Beginner/Advanced button on the electronic backboard. You and a challenger take shots (same as Beginner) until a player spells H.O.R.S.E. and is out! Follow the Leader Can you make the shot and beat the buzzer? Beginner Listen carefully to the instructions and look at the L.E.D. (Player 1 Score and Player 2 Score) on the electronic scoreboard. Match the pattern by making a basket or baskets in the left or right hoops. You have 15 seconds to make the shot or shots as directed! Advanced Press the Beginner/Advanced button on the backboard. Game play is the same, but the patterns are much more difficult to match! Free Throw Mode Shoot hoops, score baskets! Shoot as many baskets as you (and a friend) would like there is no time limit! The electronic backboard keeps score 2 points for each basket made. Hints: - If the power switch is in the On position and the toy has gone into "sleep" mode (if it has not been used for about four minutes), you can simply press one of the game selection buttons or make a basket to "wake" it up. - If you press a game selection button while you are already playing a game, the game stops and the selectee game starts. 7

8 Care and Maintenance FCC Statement (United States Only) This toy includes two inflatable balls. If the balls become soft, inflate them with a standard, manual air pump with a standard air needle. Each ball will contain the correct amount of air when its circumference measures about inches (5-56 cm). Measure the circumference of the ball with a tape measure or with a piece of string cut inches (5-56 cm) long. Do not over-inflate the ball. To clean, use a clean, damp cloth. Be sure to remove soap residue. Do not immerse this product. Do not leave this toy outside in freezing weather. Water left inside the base will freeze and possible damage the base. Check all fasteners regularly to be sure they are tight. If the fasteners are not tight, tighten them as necessary. Check plastic parts regularly and if broken or cracked, dispose of them properly. We recommend indoor storage if this product will not be used for an extended period of time. Consumer Information Questions? We d like to hear from you! Call Fisher-Price Consumer Relations, toll-free at , 8 AM - 6 PM EST Monday through Friday. Hearing-impaired consumers using TTY/TDD equipment, please call Or, write to: Fisher-Price Consumer Relations 66 Girard Avenue East Aurora, New York 14052, U.S.A. Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio o television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/tv technician for help. Note: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to operate the equipment. One (1) Year Limited Warranty Fisher-Price, Inc., 66 Girard Avenue, East Aurora, New York warrants to the original owner that this Arcade Challenge Basketball is free from all defects in material and workmanship when used under normal conditions for a period of one (1) year from the date of purchase. Should the product fail to perform properly, we will repair or replace it at our option, free of charge. Purchaser is responsible for shipping the product to Consumer Relations at the address indicated above and for all associated freight and insurance cost. Fisher-Price, Inc. will bear the cost of shipping the repaired or replaced item to you. This warranty is void if the owner repairs or modifies the product. THIS WARRANTY EXCLUDES ANY LIABILITY OTHER THAN THAT EXPRESSLY STATED ABOVE INCLUDING BUT NOT LIMITED TO ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES. SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS WHICH MAY VARY FROM STATE TO STATE. For countries outside the United States: CANADA Questions? , Mattel Canada Inc., 6155 Freemont Blvd., Mississauga, Ontario L5R W2. GREAT BRITAIN Mattel UK Ltd, Vanwall Business Park, Maidenhead SL6 4UB. Helpline: AUSTRALIA Mattel Australia Pty. Ltd., 658 Church Street, Locked Bag #870, Richmond, Victoria 121 Australia. Consumer Advisory Service NEW ZEALAND William Pickering Drive, Albany 11, Auckland. ASIA Mattel East Asia Ltd, Room 1106, South Tower, World Finance Centre, Harbour City, Tsimshatsui, HK, China.