State of the Ar t Novel InFlowTech

Size: px
Start display at page:

Download "State of the Ar t Novel InFlowTech"

Transcription

1 padlet.com/gear turbine/un2slbar3s94 State of the Ar t Novel InFlowTech State of the Art - Novel InFlow Tech - Featured Project Development; / *1; Gearturbine Project, Rotary Turbo, Have the similar basic system of the Aeolipilie Heron Steam Turbine device from Alexandria AD With Retrodynamic = DextroRPM VS LevoInFlow + Ying Yang Way Power Type - Non Waste Looses 8X/Y Thermodynamic CYCLE Way Steps. 4 Turbos, Higher ef cient percent. No blade erosion by sand & very low heat target signature Pat:197187IMPI MX Dic1991 Atypical Motor Engine Type. / *2; Imploturbocompressor; Implo-Ducted, One Moving Part System Excellence Design - The InFlow Interaction comes from Macro-Flow and goes to Micro-Flow by Implossion - Only One Compression Step; In ow, Compression and out ow at one simple circular dynamic motion / New Concept. To see a Imploturbocompressor animation, is possible on a simple way, just to check an Hurricane Satellite view, and same in ow way nature. CARLOS BARRERA 12 DE ABRIL DE :24 Imploturbocompressor Receiving Flow Active Propulsion Flow Imploturbocompressor Imploturbocompressor Up Cut

2 Imploturbocompressor Up View Imploturbocompressor A-Receiving, B-Propulsion

3 Imploturbocompressor A-Receiving, B-Propulsion Imploturbocompressor InSide Turbo Fan Blades

4 Imploturbocompressor ImploCavity LikeHurricane Imploturbocompressor Lateral Cut

5 Imploturbocompressor Lateral View Imploturbocompressor Fron View

6 Imploturbocompressor All Parts Isometric Draw ROTOR AND SHELL

7 ROTOR PARTS ROTOR PARTS

8 LATERAL CUT CENTER OF THE ROTOR

9 ROTOR TURBOS DRAW SIMILAR OF TWO SNAKES

10 EL NORTE NEWSPAPER MTY. MEX. RETRODYNAMIC EFFECT

11 MUY INTERESNATE SCIENTIFIC MAGAZINE 8-X/Y CYCLE - Way Steps

12 MUY INTERESANTE SCIENTIFIC MAGAZINE RETRODYNAMIC INFLOW MUY INTERESANTE SCIENTIFIC MAGAZINE

13 INSIDE ROTOR CONDUITS ROTOR PARTS INSIDE ROTOR CONDUITS CENTER OF THE ROTOR SHEL

14 FRONT CUT DRAW PATENT DRAW LATERAL CUT DRAW ALL PARTS

15

State of the Art Novel Rotary-Turbo-InFlow Tech - Gearturbine Project - Featured Development - Atypical Motor Engine Type

State of the Art Novel Rotary-Turbo-InFlow Tech - Gearturbine Project - Featured Development - Atypical Motor Engine Type Author Barrera Carlos Technology Overview Oct 30, 2014, 4:42 PM 1 / 4 Novel Rotary-Turbo-InFlow Tech - Featured Development GEARTURBINE PROJECT Atypical InFlow Thermodynamic Technology Proposal Submission

More information

State of the Art - Novel InFlow Tech - Featured Project Development; 1-Gearturbine, 2-Imploturbocompressor

State of the Art - Novel InFlow Tech - Featured Project Development; 1-Gearturbine, 2-Imploturbocompressor State of the Art - Novel InFlow Tech - Featured Project Development; 1-Gearturbine, 2-Imploturbocompressor SUMMARY OF THE TECHNOLOGY TechTip State of the ArtNovel InFlow Tech Project Development 1Gearturbine

More information

Interactive Computer Based Courses

Interactive Computer Based Courses These SKF Self-Learning Tools (SLT) are a onestop interactive solution for students at various levels including the students of mechanical and other engineering streams. They eliminate the need to take

More information

Energy checks in Sweden a study of 10 small and mediumsized enterprises

Energy checks in Sweden a study of 10 small and mediumsized enterprises Energy checks in Sweden a study of 10 small and mediumsized enterprises Mikael Söderström Rosén Senior energy consultant at KanEnergi Sweden AB Specialties are energy efficiency in industry and buildings,

More information

Applied Thermodynamics for Marine Systems Prof. P. K. Das Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Applied Thermodynamics for Marine Systems Prof. P. K. Das Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Applied Thermodynamics for Marine Systems Prof. P. K. Das Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture - 1 Introduction & Some Definitions Good afternoon everybody.

More information

Document number #12 DNS13006. Authors #20 Telephone: Date #40 AUGUST 2013

Document number #12 DNS13006. Authors #20 Telephone: Date #40 AUGUST 2013 #0 INSPECTION REPORT Discipline or report series #0 Inspection VESTAS wind turbines Title #5 VESTAS WIND TURBINE #2 Report number #52 #3 Authors #20 Telephone: Date #40 AUGUST 203 Summary #60 6 UNIT VESTAS

More information

HPC enabling of OpenFOAM for CFD Applications 25 th 27 th March 2015 CINECA Casalecchio di Reno, Bologna

HPC enabling of OpenFOAM for CFD Applications 25 th 27 th March 2015 CINECA Casalecchio di Reno, Bologna VIRTUAL TEST RIG FOR PERFORMANCE EVALUATION OF A ROTATING HEAT EXCHANGER A. Corsini G. Delibra M. Martini G. Di Meo A. Santoriello FMGroup @ DIMA-URLS www.dima.uniroma1.it Enel Ingegneria e Ricerca S.p.A.

More information

Unit 96: Marine Propulsion Power Plant

Unit 96: Marine Propulsion Power Plant Unit 96: Marine Propulsion Power Plant Unit code: R/503/1756 QCF Level: 5 Credit value: 15 Aim This unit provides learners with an understanding of marine propulsion power plant. Learners will also gain

More information

Preventive Maintenance. State Energy Assessment Workshop By: DTE Energy Partnership & Services

Preventive Maintenance. State Energy Assessment Workshop By: DTE Energy Partnership & Services Preventive Maintenance State Energy Assessment Workshop By: DTE Energy Partnership & Services Do you know? World wide research has shown that one of the reasons causing 80% of the accidents is deficient

More information

Forms of Energy: Multiple Transformations : Teacher Notes

Forms of Energy: Multiple Transformations : Teacher Notes Forms of Energy: Multiple Transformations : Teacher Notes Introduction The focus of the investigation is to further define energy and realize that chains of energy transformations can occur. The VoltageCurrent,

More information

HOT & COLD. Basic Thermodynamics and Large Building Heating and Cooling

HOT & COLD. Basic Thermodynamics and Large Building Heating and Cooling HOT & COLD Basic Thermodynamics and Large Building Heating and Cooling What is Thermodynamics? It s the study of energy conversion using heat and other forms of energy based on temperature, volume, and

More information

Modelling and CFD Analysis of Single Stage IP Steam Turbine

Modelling and CFD Analysis of Single Stage IP Steam Turbine International Journal of Mechanical Engineering, ISSN:2051-3232, Vol.42, Issue.1 1215 Modelling and CFD Analysis of Single Stage IP Steam Turbine C RAJESH BABU Mechanical Engineering Department, Gitam

More information

WindWise Education. 2 nd. T ransforming the Energy of Wind into Powerful Minds. editi. A Curriculum for Grades 6 12

WindWise Education. 2 nd. T ransforming the Energy of Wind into Powerful Minds. editi. A Curriculum for Grades 6 12 WindWise Education T ransforming the Energy of Wind into Powerful Minds A Curriculum for Grades 6 12 Notice Except for educational use by an individual teacher in a classroom setting this work may not

More information

Thermodynamical aspects of the passage to hybrid nuclear power plants

Thermodynamical aspects of the passage to hybrid nuclear power plants Energy Production and Management in the 21st Century, Vol. 1 273 Thermodynamical aspects of the passage to hybrid nuclear power plants A. Zaryankin, A. Rogalev & I. Komarov Moscow Power Engineering Institute,

More information

Copy Right By: Thomas T.S. Wan

Copy Right By: Thomas T.S. Wan Chapter 6 Screw Compressors Copy Right By: Thomas T.S. Wan 温 到 祥 著 Sept. 3, 2008 All rights reserved Screw compressors are the most widely used compressors for industrial refrigeration application in the

More information

Keeping corrosion at bay

Keeping corrosion at bay Keeping corrosion at bay Analysis in ultra-supercritical power plants Corrosion is the natural enemy of steam-electric power plants, eating away at pipes, turbine blades, and rotors. The lack of a separation

More information

Energy Savings through Electric-assist Turbocharger for Marine Diesel Engines

Energy Savings through Electric-assist Turbocharger for Marine Diesel Engines 36 Energy Savings through Electric-assist Turbocharger for Marine Diesel Engines KEIICHI SHIRAISHI *1 YOSHIHISA ONO *2 YUKIO YAMASHITA *3 MUSASHI SAKAMOTO *3 The extremely slow steaming of ships has become

More information

ASHRAE Boston Chapter Meeting Designing AC Refrigeration Systems Lessons Learned February 11, 2014

ASHRAE Boston Chapter Meeting Designing AC Refrigeration Systems Lessons Learned February 11, 2014 ASHRAE Boston Chapter Meeting Designing AC Refrigeration Systems Lessons Learned February 11, 2014 Explanation of the refrigeration cycle. Compressors. Benefits and operating characteristics. -Reciprocating

More information

APPENDIX F VIBRATION TESTING PROCEDURE

APPENDIX F VIBRATION TESTING PROCEDURE APPENDIX F VIBRATION TESTING PROCEDURE Appendix F SPS-F-1 of 14 VIBRATION PERFORMANCE TESTING I. General Perform a vibration analysis on all motor driven equipment listed below after it is installed and

More information

Heat Recovery from Compressed Air Systems. kaeser.com

Heat Recovery from Compressed Air Systems. kaeser.com Heat Recovery from Compressed Air Systems kaeser.com Heat Recovery Why recover heat? The rise in energy prices is an unwelcome reality in today s manufacturing and business environment. Energy cost reduction

More information

Thermodynamic efficiency of an actuator that provides the mechanical movement for the driven equipments:

Thermodynamic efficiency of an actuator that provides the mechanical movement for the driven equipments: 1. Introduction 1.1. Industry Automation Industry automation is the term that describes a vital development programme of a production community where the project engineers build up automated manufacturing

More information

Student #41 Environmental Science 1-7-2015

Student #41 Environmental Science 1-7-2015 Student #41 Environmental Science 1-7-2015 Introduction: Wind energy is the energy extracted from wind using wind turbines to produce electrical power, windmills for mechanical power, wind pumps for water

More information

Manure The input to the system, this is produced as waste once animals have consumed plant products.

Manure The input to the system, this is produced as waste once animals have consumed plant products. Resources for Energy System Diagram Activity Labels for Anaerobic digestion poster cut apart and distribute to students Manure The input to the system, this is produced as waste once animals have consumed

More information

Network Intelligence Driven Cloud Services for a Sustainable Connected World. Fahim Kawsar Internet of Things Research Bell Labs @raswak

Network Intelligence Driven Cloud Services for a Sustainable Connected World. Fahim Kawsar Internet of Things Research Bell Labs @raswak Network Intelligence Driven Cloud Services for a Sustainable Connected World Fahim Kawsar Internet of Things Research Bell Labs @raswak MORE DEVELOPED COUNTRIES 2013: 1.2 Billion 2050: 1.3 Billion WORLD

More information

How Reed Switches are used with a Permanent Magnet

How Reed Switches are used with a Permanent Magnet How Reed Switches are used with a Permanent Magnet Using Reed Switches in a sensing environment, one generally uses a magnet for actuation. It is important to understand this interaction clearly for proper

More information

The Voith fluid coupling with its inherent hydrodynamic advantages has proved itself by millions of sales worldwide:

The Voith fluid coupling with its inherent hydrodynamic advantages has proved itself by millions of sales worldwide: Voith Our Company. Voith sets standards in paper, energy, mobility and service markets. Founded on January 1, 1867, Voith has a current workforce of 37,000, had sales of EUR 4 billion in the 2006/2007

More information

INDUSTRIAL ENERGY EFFICIENCY. CEE Bedrijvengroep, Researchpark Haasrode, Industrieweg 3, 3001 Heverlee

INDUSTRIAL ENERGY EFFICIENCY. CEE Bedrijvengroep, Researchpark Haasrode, Industrieweg 3, 3001 Heverlee INDUSTRIAL ENERGY EFFICIENCY Overview Overview CEE Industrial Energy Cases CEE CEE = Brand-Independent Partner for Industrial Energy Projects CEE-GROUP Beauvechain (BE) Auditing & Consultancy Center CEE-ENGINEERING

More information

LLC "VT Technology" INTRODUCTION OF SCREW ROTOR STEAM ENGINES AT THERMAL POWER GENERATION FACILITIES. St. Petersburg, Russia 2015

LLC VT Technology INTRODUCTION OF SCREW ROTOR STEAM ENGINES AT THERMAL POWER GENERATION FACILITIES. St. Petersburg, Russia 2015 LLC "VT Technology" INTRODUCTION OF SCREW ROTOR STEAM ENGINES AT THERMAL POWER GENERATION FACILITIES St. Petersburg, Russia 2015 DESCRIPTION OF THE SOLUTION AND TECHNOLOGY TECHNOLOGY OF SCREW ROTOR STEAM

More information

B.Ed. 2 Years Degree Course Regular with Circular - 1 -

B.Ed. 2 Years Degree Course Regular with Circular - 1 - B.Ed. 2 Years Degree Course Regular with Circular 1 B.Ed. 2 Years Degree Course Regular with Circular 2 B.Ed. 2 Years Degree Course Regular with Circular 3 B.Ed. 2 Years Degree Course Regular with Circular

More information

Evaporation Technology Using Mechanical Vapour Recompression

Evaporation Technology Using Mechanical Vapour Recompression Evaporation Technology Using Mechanical Vapour Recompression Technology and Applications engineering for a better world GEA Process Engineering Evaporation technology using mechanical vapour recompression

More information

TFSR & TFSK Roof Fans

TFSR & TFSK Roof Fans Fans Air Handling Units Air Distribution Products Fire Safety Air Conditioning Air Curtains and Heating Products Tunnel Fans TFSR & TFSK Roof Fans With swing-out function 2 I TFSR/TFSK TFSR & TFSK Roof

More information

There is no general classification of thermodynamic cycle. The following types will be discussed as those are included in the course curriculum

There is no general classification of thermodynamic cycle. The following types will be discussed as those are included in the course curriculum THERMODYNAMIC CYCLES There is no general classification of thermodynamic cycle. The following types will be discussed as those are included in the course curriculum 1. Gas power cycles a) Carnot cycle

More information

KS3 Renewable Energy. EcoStyle.co.uk. Introductory Presentation

KS3 Renewable Energy. EcoStyle.co.uk. Introductory Presentation Introductory Presentation Energy Energy is a vital to our way of life. Here are a some examples of where energy is used: Homes: central heating, powering electrical appliances, and heating water Public

More information

Unit 1 Turbine Rotor 110 MW Replacement

Unit 1 Turbine Rotor 110 MW Replacement Proceedings World Geothermal Congress 2015 Melbourne, Australia, 19-25 April 2015 Unit 1 Turbine Rotor 110 MW Replacement Amri Zein 1, Wahyu Mulyana 2 and Heribertus Dwiyudha 3 Star Energy Geothermal (Wayang

More information

Computational Modeling of Wind Turbines in OpenFOAM

Computational Modeling of Wind Turbines in OpenFOAM Computational Modeling of Wind Turbines in OpenFOAM Hamid Rahimi hamid.rahimi@uni-oldenburg.de ForWind - Center for Wind Energy Research Institute of Physics, University of Oldenburg, Germany Outline Computational

More information

Shaft grounding. Carbon brushes for shaft grounding are used in turbo-generators, in distinct AC- and DC motors and as a special application in Ships.

Shaft grounding. Carbon brushes for shaft grounding are used in turbo-generators, in distinct AC- and DC motors and as a special application in Ships. "Modern AC-Motors don't need carbon brushes and are maintenance free " Until some years ago this thrilling statement could be heard from motor OEM's. Nowadays SCHUNK supplies carbon brushes and brush holders

More information

BEST PRACTICES ADOPTED IN JINDAL STEEL & POWER LTD., RAIGARH TO ACHIEVE ENERGY EFFICIENCY. Presented By : Kumar Rohit Sudhanshu Rometra

BEST PRACTICES ADOPTED IN JINDAL STEEL & POWER LTD., RAIGARH TO ACHIEVE ENERGY EFFICIENCY. Presented By : Kumar Rohit Sudhanshu Rometra BEST PRACTICES ADOPTED IN JINDAL STEEL & POWER LTD., RAIGARH TO ACHIEVE ENERGY EFFICIENCY Presented By : Kumar Rohit Sudhanshu Rometra Energy & Climate Change (E&CC) Department, JSPL, Raigarh E&CC Department,

More information

Conventional Energy Sources

Conventional Energy Sources 9.2 Conventional Energy Sources Key Question: What benefits and problems come with common sources of energy? Hints The word plant here is not the kind that grows out of the ground. In this section, plants

More information

Alternative Energy Resources

Alternative Energy Resources Alternative Energy Resources Energy Resource Advantages Disadvantages What are some renewable energy resources? A nonrenewable resource cannot be replaced in a reasonable amount of time. Fossil fuels such

More information

ADVANCED DESIGN APPLICATIONS. Course Overview. 36 Weeks. REVIEW PART 1: Brainstorming and Engineering Journal (1 class period)

ADVANCED DESIGN APPLICATIONS. Course Overview. 36 Weeks. REVIEW PART 1: Brainstorming and Engineering Journal (1 class period) ADVANCED DESIGN APPLICATIONS Course Overview 36 Weeks REVIEW: TECHNOLOGY AND ENGINEERING REVIEW (9 Class Periods) REVIEW PART 1: Brainstorming and Engineering Journal (1 class period) Purpose: The purpose

More information

Sheet 5:Chapter 5 5 1C Name four physical quantities that are conserved and two quantities that are not conserved during a process.

Sheet 5:Chapter 5 5 1C Name four physical quantities that are conserved and two quantities that are not conserved during a process. Thermo 1 (MEP 261) Thermodynamics An Engineering Approach Yunus A. Cengel & Michael A. Boles 7 th Edition, McGraw-Hill Companies, ISBN-978-0-07-352932-5, 2008 Sheet 5:Chapter 5 5 1C Name four physical

More information

Chapter 10. Flow Rate. Flow Rate. Flow Measurements. The velocity of the flow is described at any

Chapter 10. Flow Rate. Flow Rate. Flow Measurements. The velocity of the flow is described at any Chapter 10 Flow Measurements Material from Theory and Design for Mechanical Measurements; Figliola, Third Edition Flow Rate Flow rate can be expressed in terms of volume flow rate (volume/time) or mass

More information

COMPARISON OF COUNTER ROTATING AND TRADITIONAL AXIAL AIRCRAFT LOW-PRESSURE TURBINES INTEGRAL AND DETAILED PERFORMANCES

COMPARISON OF COUNTER ROTATING AND TRADITIONAL AXIAL AIRCRAFT LOW-PRESSURE TURBINES INTEGRAL AND DETAILED PERFORMANCES COMPARISON OF COUNTER ROTATING AND TRADITIONAL AXIAL AIRCRAFT LOW-PRESSURE TURBINES INTEGRAL AND DETAILED PERFORMANCES Leonid Moroz, Petr Pagur, Yuri Govorushchenko, Kirill Grebennik SoftInWay Inc. 35

More information

Investigating Electrical Energy Workshop. QUT Extreme Engineering

Investigating Electrical Energy Workshop. QUT Extreme Engineering Investigating Electrical Energy Workshop QUT Extreme Engineering Investigating Electrical Energy Introduction This workshop is designed for grades 6-7, to give them some hands-on experience in building

More information

MCM; An Inexpensive, Simple to Use Model Based Condition Monitoring Technology

MCM; An Inexpensive, Simple to Use Model Based Condition Monitoring Technology MCM; An Inexpensive, Simple to Use Model Based Condition Monitoring Technology Christo van der Walt Engineering Dynamics, South Africa engdyn@global.co.za Ahmet Duyar, Ekrem Cestepe Artesis A.Ş., Turkey

More information

RETROFIT N ROTORS FOR EFFICIENT OIL-FLOODED SCREW COMPRESSORS

RETROFIT N ROTORS FOR EFFICIENT OIL-FLOODED SCREW COMPRESSORS RETROFIT N ROTORS FOR EFFICIENT OIL-FLOODED SCREW COMPRESSORS N Stosic, Chair in Positive Displacement Compressors, I K Smith, Professor of Applied Thermodynamics and A Kovacevic, Research Fellow Centre

More information

UEENEEJ164A Analyse the operation of HVAC air and hydronic systems

UEENEEJ164A Analyse the operation of HVAC air and hydronic systems UEENEEJ164A Analyse the operation of HVAC air and hydronic systems Release: 2 UEENEEJ164A Analyse the operation of HVAC air and hydronic systems Modification History Not Applicable Unit Descriptor Unit

More information

Presentation on CNC MACHINES. By: Hafiz Muhammad Rizwan

Presentation on CNC MACHINES. By: Hafiz Muhammad Rizwan Presentation on CNC MACHINES By: Hafiz Muhammad Rizwan WELCOME CNC Machines What is a CNC Machine? CNC : Computer Numerical Control Conventionally, an operator decides and adjusts various machines parameters

More information

Measuring Electricity Class Activity

Measuring Electricity Class Activity Measuring Electricity Class Activity Objective: To understand what energy is, how it impacts our daily lives, and how one can become an energy steward. Learning Outcomes: Students will: 1. Understand where

More information

Understanding and Measuring School Electronics

Understanding and Measuring School Electronics Understanding and Measuring School Electronics MATERIALS NEEDED: 1. 6 energy monitoring devices (note: these can be obtained from a variety of sources, i.e., local hardware stores, internet [average cost

More information

HVAC SYSTEM (HEATER, VENTILATOR, AND A/C)

HVAC SYSTEM (HEATER, VENTILATOR, AND A/C) HVAC SYSTEM (HEATER, VENTILATOR, AND A/C) HEATER SYSTEM 1. Heater System A: GENERAL A semi-center type integrated air conditioning unit is used, where a high performance heater core and an evaporator core

More information

Energy and Energy Transformations Test Review

Energy and Energy Transformations Test Review Energy and Energy Transformations Test Review Completion: 1. Mass 13. Kinetic 2. Four 14. thermal 3. Kinetic 15. Thermal energy (heat) 4. Electromagnetic/Radiant 16. Thermal energy (heat) 5. Thermal 17.

More information

System Components and Configurations

System Components and Configurations Chapter 4 System Components and Configurations Major Components Balance-of-System System Classifications and Designs 2012 Jim Dunlop Solar Overview Identifying major PV system components and their functions,

More information

Energy Efficiency in Steam Systems

Energy Efficiency in Steam Systems Energy Efficiency in Steam Systems Fundamentals of Energy Efficiency: An Introductory Workshop April 2008 John S. Raschko, Ph.D. Mass. Office of Technical Assistance www.mass.gov/envir/ota (617) 626-1093

More information

King Fahd University of Petroleum and Minerals Electrical Engineering Department EE399 Summer Training. Prepared for. By Baqer Bu-Shafie ID: 200669580

King Fahd University of Petroleum and Minerals Electrical Engineering Department EE399 Summer Training. Prepared for. By Baqer Bu-Shafie ID: 200669580 King Fahd University of Petroleum and Minerals Electrical Engineering Department EE399 Summer Training Prepared for Advisor: DR. Hassan, Essam El-din M. Examiner: DR. M. H. SHWEHDI By Baqer Bu-Shafie ID:

More information

Course Description. (ELMS website)

Course Description. (ELMS website) Course: ENPM 654 Energy Systems Management Semester: Summer, 2015 Days: Tuesdays and Thursdays, from 2 June through 23 July 2015 Time: 6:00-8:40PM Location: UMCP (JMP 2216) and via DETS to remote sites

More information

Current state of plant Functioning as a peak and emergency centre. Statistics Accumulated operating hours:

Current state of plant Functioning as a peak and emergency centre. Statistics Accumulated operating hours: Current state of plant Functioning as a peak and emergency centre Statistics Accumulated operating hours: D1-2-3-6-7: 43000 to 48000 hrs D4-5: 53000 to 57000 hrs D8: 33000 hrs Layout of the plant Index:

More information

Some scientific challenges in aerodynamics for wind turbines

Some scientific challenges in aerodynamics for wind turbines Some scientific challenges in aerodynamics for wind turbines Christian Bak Senior Scientist Team Leader: Aerodynamics, aeroacoustics, airfoil and blade design Technical University of Denmark DTU Wind Energy

More information

Sustainable energy for a cleaner environment, stronger economy, and more secure future.

Sustainable energy for a cleaner environment, stronger economy, and more secure future. Sustainable energy for a cleaner environment, stronger economy, and more secure future. Oak Ridge National Laboratory is the U.S. Department of Energy s largest science and energy laboratory. With 4,400

More information

CURRICULUM VITAE. 1.Personal data: 2.Education background: Education ( degrees, dates, universities ) : 3.Work experience document:

CURRICULUM VITAE. 1.Personal data: 2.Education background: Education ( degrees, dates, universities ) : 3.Work experience document: 1.Personal data: CURRICULUM VITAE Name : Teoman Surname: Ayhan Date of birth: 20.08.1945 Birth of place: Uskudar Birth of country: Turkey Nationality: Turkish Republic Marriage status: Married E-mail:

More information

ROMO Wind Juan Carlos Martínez-Amago Jornadas Técnicas - AEE September 26 th 2012

ROMO Wind Juan Carlos Martínez-Amago Jornadas Técnicas - AEE September 26 th 2012 ROMO Wind Juan Carlos Martínez-Amago Jornadas Técnicas - AEE September 26 th 2012 ROMO WIND Wind power technology company - Independent Focused on increasing production from existing wind farms Products

More information

Programme Educational Objectives(PEOs)

Programme Educational Objectives(PEOs) Programme Educational Objectives(PEOs) To develop skilled manpower in the field of turbomachines with the knowledge of transport processes through the turbomachine passage, analytical, numerical and experimental

More information

Joints Workshop Vibration and Turbomachinery

Joints Workshop Vibration and Turbomachinery Vibration University Technology Centre Joints Workshop Vibration and Turbomachinery Muzio M. Gola Professor of Machine Design Team leader LAQ AERMEC DIMEAS -POLITO muzio.gola@polito.it C. Schwingshackl

More information

EXPERIMENT NO. 3. Aim: To study the construction and working of 4- stroke petrol / diesel engine.

EXPERIMENT NO. 3. Aim: To study the construction and working of 4- stroke petrol / diesel engine. EXPERIMENT NO. 3 Aim: To study the construction and working of 4- stroke petrol / diesel engine. Theory: A machine or device which derives heat from the combustion of fuel and converts part of this energy

More information

An insight into some innovative cycles for aircraft propulsion

An insight into some innovative cycles for aircraft propulsion 731 An insight into some innovative cycles for aircraft propulsion G Corchero 1, J L Montañés 1, D Pascovici 2, and S Ogaji 2 1 Universidad Politécnica de Madrid (UPM), E. T. S. Ingenieros Aeronáuticos,

More information

Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy

Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy Post graduate program for engineering leading to M.Tech in renewable energy systems with specialization in solar energy 1.0 Introduction India s growing energy needs mixed with world s order for reducing

More information

THE DELTON GROUP MANPOWER TRAINING CONSULTANCY SHORT COURSE PROGRAMME TOPICS LISTING

THE DELTON GROUP MANPOWER TRAINING CONSULTANCY SHORT COURSE PROGRAMME TOPICS LISTING THE DELTON GROUP MANPOWER TRAINING CONSULTANCY SHORT COURSE PROGRAMME TOPICS LISTING Delton Short Course Programmes English Language Technical English Language English Language for the Oil Industry Oil

More information

New England Defense Contracting Trends

New England Defense Contracting Trends New England Defense Contracting Trends 2006 2010 Prepared for the Defense Technology Initiative University of Massachusetts Donahue Institute Economic and Public Policy Research Unit October, 2011 About

More information

Newsletter September 2013

Newsletter September 2013 Newsletter September 2013 This newsletter should inform you about the latest developments of aerodyn Energiesysteme GmbH Dear customers and business friends In the six months since our last newsletter,

More information

GE Oil & Gas. Air cooled heat exchangers Robust and reliable for all loads and applications

GE Oil & Gas. Air cooled heat exchangers Robust and reliable for all loads and applications GE Oil & Gas Air cooled heat exchangers Robust and reliable for all loads and applications What it is Air cooled heat exchangers are commonly used in industrial applications where a reliable source of

More information

GE Energy. Roots * Turbo Blower. Innovation that will blow you away

GE Energy. Roots * Turbo Blower. Innovation that will blow you away GE Energy Roots * Turbo Blower Innovation that will blow you away New generation technology from a company with a proven history GE Energy provides innovative technology for air and gas handling solutions

More information

Enhanced power and heat generation from biomass and municipal waste. Torsten Strand. Siemens Power Generation Industrial Applications

Enhanced power and heat generation from biomass and municipal waste. Torsten Strand. Siemens Power Generation Industrial Applications Enhanced power and heat generation from biomass and municipal waste Torsten Strand Siemens Power Generation Industrial Applications Enhanced power and heat generation from biomass and municipal waste Torsten

More information

7.1 Fission Fission Demonstration

7.1 Fission Fission Demonstration Fission Demonstration Grade Level 5-12 Disciplinary Core Ideas (DCI, NGSS) 5-PS1-1, 5-PS1-3, 5-ESS3-1, 3-5 ETS1-1, MS-PS1-4, MS- PS1-5, MS-PS3-1, MS-PS3-2, MS-PS3-4, MS-PS3-5, HS- PS1-1, HS-PS1-8 Time

More information

FOR SALE: RECYCLING PLANT FOR. - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO. Single shaft shredder

FOR SALE: RECYCLING PLANT FOR. - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO. Single shaft shredder FOR SALE: RECYCLING PLANT FOR - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO Single shaft shredder Stationary, weight 40 ton Table of content Sale of BANO PREMAC

More information

100% Oil-Free - Guaranteed

100% Oil-Free - Guaranteed 03 GB 100% Oil-Free - Guaranteed Oil-Free Rotary Screw Compressors Fixed & Regulated Speed (RS) Truly innovative oil-free compressed air technologies D75-D160 and Water Cooled purity that meets the most

More information

Engineering Software Manufacturing Training. The Experts in Turbomachinery

Engineering Software Manufacturing Training. The Experts in Turbomachinery The Experts in Turbomachinery Improving the design and manufacturability of compressors, pumps, gas turbines, steam turbines, fans, blowers, and turbochargers. Engineering Software Manufacturing Training

More information

Energy Engineering Program. Mission. Vision. Today s 3 Critical Challenges 5/24/2012

Energy Engineering Program. Mission. Vision. Today s 3 Critical Challenges 5/24/2012 Engineering Energy Program of the University of the Philippines & the Renewable Energy Act of 2008 Energy Engineering Program It was instituted in 1983 with the objective of training specialists who will:

More information

Fluid Mechanics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur

Fluid Mechanics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Fluid Mechanics Prof. S. K. Som Department of Mechanical Engineering Indian Institute of Technology, Kharagpur Lecture - 20 Conservation Equations in Fluid Flow Part VIII Good morning. I welcome you all

More information

Electrical Engineer. Skyler Grable-Gibson Nathaniel Cole Victor Bultemeier

Electrical Engineer. Skyler Grable-Gibson Nathaniel Cole Victor Bultemeier Electrical Engineer Skyler Grable-Gibson Nathaniel Cole Victor Bultemeier PAY RANGE Median annual wage for an electrical engineer is $87,920 Hourly pay rate: $43.09 Median wage is the wage at which half

More information

Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D.

Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology. Graduate Program (S.M., Ph.D., Sc.D. Department of Aeronautics and Astronautics School of Engineering Massachusetts Institute of Technology Graduate Program (S.M., Ph.D., Sc.D.) Field: Air-Breathing Propulsion Date: September 4, 2007 Introduction

More information

How is Electricity Produced? Types of Power Plants Hydroelectric Steam Combustion

How is Electricity Produced? Types of Power Plants Hydroelectric Steam Combustion Types of Power Plants Hydroelectric Steam Combustion Power Plants in Maryland Locating Power Plants Power Plants and Fuel Types Electric Power From Power Plant to You! How is Electricity Produced? Maryland

More information

FAN PROTECTION AGAINST STALLING PHENOMENON

FAN PROTECTION AGAINST STALLING PHENOMENON FAN PROTECTION AGAINST STALLING PHENOMENON Roberto Arias Álvarez 1 Javier Fernández López 2 2 1 ZITRON Technical Director roberto@zitron.com ZITRON Technical Pre Sales Management jfernandez@zitron.com

More information

THERMAL POWER PLANTS Vol. III - Steam Turbine Impulse and Reaction Blading - R.A. Chaplin STEAM TURBINE IMPULSE AND REACTION BLADING

THERMAL POWER PLANTS Vol. III - Steam Turbine Impulse and Reaction Blading - R.A. Chaplin STEAM TURBINE IMPULSE AND REACTION BLADING STEAM TURBINE IMPULSE AND REACTION BLADING R.A. Chaplin Department of Chemical Engineering, University of New Brunswick, Canada Keywords: Steam Turbines, Turbine Blades, Velocity Diagrams, Impulse, Reaction,

More information

T E A C H E R S N O T E S

T E A C H E R S N O T E S T E A C H E R S N O T E S Focus: Students explore energy: its sources, forms, and transformations. Students also consider the benefits of energy-efficient technologies and energy conservation. Learning

More information

FINE TM /Marine. CFD Suite for Marine Applications. Advanced Development for Better Products. www.numeca.com

FINE TM /Marine. CFD Suite for Marine Applications. Advanced Development for Better Products. www.numeca.com FINE TM /Marine CFD Suite for Marine Applications Advanced Development for Better Products www.numeca.com FINE TM /Marine FINE /Marine is a unique integrated CFD software environment for the simulation

More information

Discover Howmet Engineering. Engineer Training Program High tech Sales Direct Placement

Discover Howmet Engineering. Engineer Training Program High tech Sales Direct Placement Discover Howmet Engineering Engineer Training Program High tech Sales Direct Placement You thrive on challenge. Howmet is the ideal company Whether you are interested in progressive engineering or high

More information

UNITED STATES PATENT OFFICE.

UNITED STATES PATENT OFFICE. UNITED STATES PATENT OFFICE. NIKOLA TESLA, OP NEW YORK, N. Y. TURBINE, 1,061,206. Specification of Letters Patent. Patented May 6, 1913. Original application filed October 21, 1909, Serial No. 523,832.

More information

Software-Engineering und Optimierungsanwendungen in der Thermodynamik

Software-Engineering und Optimierungsanwendungen in der Thermodynamik Software-Engineering und Optimierungsanwendungen in der Thermodynamik Optimierung 3 Optimization Frameworks Prof. Dr. Rolf Dornberger Optimization: 3 Optimization Frameworks 30.04.2006 3 Optimization Frameworks

More information

Comparative Analysis of Gas Turbine Blades with and without Turbulators

Comparative Analysis of Gas Turbine Blades with and without Turbulators Comparative Analysis of Gas Turbine Blades with and without Turbulators Sagar H T 1, Kishan Naik 2 1 PG Student, Dept. of Studies in Mechanical Engineering, University BDT College of Engineering, Davangere,

More information

Mass and Energy Analysis of Control Volumes

Mass and Energy Analysis of Control Volumes MAE 320-Chapter 5 Mass and Energy Analysis of Control Volumes Objectives Develop the conservation of mass principle. Apply the conservation of mass principle to various systems including steady- and unsteady-flow

More information

DATES TAUGHT DATE ASSESSED. ASSESSMENT TYPE (classroom, STAR, objective, subjective, project, etc.) Ongoing Ongoing Ongoing Discussion Classroom Tests

DATES TAUGHT DATE ASSESSED. ASSESSMENT TYPE (classroom, STAR, objective, subjective, project, etc.) Ongoing Ongoing Ongoing Discussion Classroom Tests York Public Schools, 2 nd Grade STRAND Inquiry and Nature of STANDARD OBJECTIVES (What it looks like in the classroom) The learner will SC2.1.1.a Ask questions that relate to a science topic SC2.1.1.b

More information

GEOTHERMAL POWER GENERATION A PRIMER ON LOW-TEMPERATURE, SMALL-SCALE APPLICATIONS

GEOTHERMAL POWER GENERATION A PRIMER ON LOW-TEMPERATURE, SMALL-SCALE APPLICATIONS GEOTHERMAL POWER GENERATION A PRIMER ON LOW-TEMPERATURE, SMALL-SCALE APPLICATIONS by Kevin Rafferty Geo-Heat Center January 2000 REALITY CHECK Owners of low-temperature geothermal resources are often interested

More information

The Invention Of The Jet Engine. Milo Whittle

The Invention Of The Jet Engine. Milo Whittle The Invention Of The Jet Engine Milo Whittle Contents: PG.1 - Introduction To An Imaginative Idea: Yuck! PG.2 - Engine Innovator: Shy Boy Becomes Daredevil Pilot PG.3 - R.A.F. What On Earth Is The R.A.F.?

More information

Introduction to Aerospace Propulsion Prof. Bhaskar Roy Prof. A.M. Pradeep Department of Aerospace Engineering Indian Institute of Technology, Bombay

Introduction to Aerospace Propulsion Prof. Bhaskar Roy Prof. A.M. Pradeep Department of Aerospace Engineering Indian Institute of Technology, Bombay Introduction to Aerospace Propulsion Prof. Bhaskar Roy Prof. A.M. Pradeep Department of Aerospace Engineering Indian Institute of Technology, Bombay Module No. # 01 Lecture No. # 39 Closure of the lecture

More information

Theory of turbo machinery / Turbomaskinernas teori. Chapter 4

Theory of turbo machinery / Turbomaskinernas teori. Chapter 4 Theory of turbo machinery / Turbomaskinernas teori Chapter 4 Axial-Flow Turbines: Mean-Line Analyses and Design Power is more certainly retained by wary measures than by daring counsels. (Tacitius, Annals)

More information

Mechanical Design of Turbojet Engines. An Introduction

Mechanical Design of Turbojet Engines. An Introduction Mechanical Design of Turbomachinery Mechanical Design of Turbojet Engines An Introduction Reference: AERO0015-1 - MECHANICAL DESIGN OF TURBOMACHINERY - 5 ECTS - J.-C. GOLINVAL University of Liege (Belgium)

More information

Energy and Society. Professor Ani Aprahamian

Energy and Society. Professor Ani Aprahamian Energy and Society Professor Ani Aprahamian Wednesday, September 14th Nieuwland Science Hall 123; 6 pm - 7pm Dr. Peter Burns - "Nuclear Energy: Past Mistakes, Current Challenges, Future Prospects" Thursday,

More information

Oil and Coolant Circulating Heating System. Model - OCSM

Oil and Coolant Circulating Heating System. Model - OCSM Oil and Coolant Circulating Heating System Model - OCSM Installation & Operation Manual 216280-000 REV 2 Identifying Your System The HOTSTART heating system is designed to heat fluids for use in marine

More information

Journal of Chemical and Pharmaceutical Research, 2014, 6(5): 590-594. Research Article

Journal of Chemical and Pharmaceutical Research, 2014, 6(5): 590-594. Research Article Available online www.jocpr.com Journal of Chemical and Pharmaceutical Research, 2014, 6(5): 590-594 Research Article ISSN : 0975-7384 CODEN(USA) : JCPRC5 Research and design of cleaning device for oil

More information

Gasification: An Old Technology for a New Use

Gasification: An Old Technology for a New Use Gasification: An Old Technology for a New Use Sponsored by: Joel Tallaksen, Biomass Coordinator West Central Research & Outreach Center, University of Minnesota Fueling the Future: The Role of Woody and

More information