PROGRAMME SPECIFICATION (Master s degree)

Transcription

1 PROGRAMME SPECIFICATION (Master s degree) General information Higher education program level FQ-EHEA the second cycle, EQF LLL level 7, HPK level 8 / Master of Science Full name of qualification Master of Science in Industrial and Civil Construction Programme official name Specialty educational program 192 «Construction and civil engineering» field of knowledge 19 «Architecture and construction» Diploma type and number of credits according to the program Higher educational establishment Master s of Science Diploma (Single Honours), 90 credits ЄКТС Ternopil I.Pulu y national technical university Licence АЕ of Accreditation institution Accreditation commission of Ukraine (National agency of higher education quality assurance) Accreditation period Certificate of accreditation РД-IV Valid to А Programme purpose To educate an expert who is able to solve difficult specific tasks and practical problems of construction under complex and uncertain conditions В Programme characteristic 1 Application domain Architecture and construction 2 Application domain Focus on ability to make theoretical and calculationexperimental description papers with elements of scientific research, to solve problems of construction - tasks of dynamics, strength, durability, resistance, rational optimization, operational life, survivorship, reliability and safety of machines, structures, composite structures, buildings, plants, units, equipment, devices, instruments and their components; using information technologies, high computer technologies, computer-aided software, computer-aided design system, engineering analysis and computer engineering software; projects management, marketing; organization of work of scientific, design and industrial subdivisions engaged in buildings, structures and technologies development and design.

2 3 Programme status Educational-professional 4 Programme features Integration of general-technical, special technical and technological training for professional activity in construction, technological, design, operation and repair services of production enterprises, workshops, production areas providing a wide range of building structures and their components production, research institutions and educational establishments. С Rights of graduate Graduate academic rights Possibility of study on the program of the third 1 cycle FQ-EHEA, of level 9 EQF-LLL and of level 9 HPK 2 Employment production lines (subdivisions) foremen (other managers) in construction; engineers in construction; research workers (construction branch); lecturers of specialized educational establishments; lecturers of universities and other higher educational establishments. D Teaching tehnique and rating system 1 Teaching methods Passive (explanatory-illustrative); active (problem, game, interactive, project, information-computer self-developing)- according to dominating techniques and ways of teaching: Group and integrative study according to forms of organization. Positional and context study, collaboration technology according to pedagogical cooperation orientation. 2 Rating system Students progress in study is estimated according to 4-mark ( excellent, good, satisfactory, unsatisfactory ) and verbal ( passed, not passed ) systems. Kinds of control: current, theme, periodic, final, self-control. Forms of control: oral and written questioning, tests, design projects, coursepapers and projects, laboratory reports, presentations, reports on internship programs and scientific-research papers, certification exam etc. Е Programme competence

3 Іntegral Ability to solve complex specific tasks and practical problems in the sphere of construction that expects some scientific theories and construction methods to be used and is characterized by complex and uncertain conditions. 1 General Skill to advance and develop his/her intellectual and cultural level; readiness for constant qualification extension and professional perfection; capability of effective using the fundamental statements and methods of natural, humanitarian, economic and social sciences, necessary for his/her professional activity; be able to master new methods of work under changing scientific and scientificproduction character of his/her professional activity; ability to judge his/her pros and cons critically. Ability to use creatively and effectively the skills of grammatical writing and speaking, be able to communicate in the professional sphere, have a speech culture; capability of scientific-technical literature reading and conceiving, speak and write a foreign language on everyday, professional and scientific topics, be experienced in making presentations, writing reports, articles scientific research statements both in native and foreign languages. Ability to apply knowledge and skills of research and design work organization in his/her work, in staff management; use normative law documents in their activity; ability to find managerial decisions and be ready to bear responsibility for them. Awareness of main normative law documents necessary for professional activity; be able to interpret any document correctly; ability to use normative law documents efficiently to solve specific tasks. Master main methods, ways and means of information receiving, storing and processing; ability of choosing the most effective methods, ways and means of information receiving, storing and processing depending on certain professional aims and tasks; be skillful in using computer technologies hardware as an information management tool. 2 Professional Be skillful in determining the essence of

4 scientific-technical problems occurring in their professional activity and involve the appropriate methods and means for their solving; have a skill to analyze the current problems of construction critically taking into account production needs, modern scientific achievements and world tendencies of technologies and engineering; ability to set tasks and develop research program, choose the adequate methods of theoretical, applied and experimental tasks solving; analyze, interpret, present and use the obtained results; be competent in using methods of scientific research and calculation, determination of technical-economic efficiency of the developments; knowledge of scientific research work peculiarities in different industries, fuel-power complex, transport and construction; be able to solve complex scientifictechnical problems that demand development and application of mathematical and computer models and software. Skill of mastering and applying modern theories, physical-mathematical and calculation methods, new systems of computer mathematics and systems of computer-aided design and computer engineering (CAD/CAE-systems) for practical problems effective solving; comprehensive use of local knowledge and readiness to apply them in practical engineering activity under international professional mobile conditions. Skill of development and optimizing modern high technologies in different branches of construction taking into account economical and ecological requirements; knowledge of peculiarities of modern computer-aided production lines building and operation; skill of adapting and introducing modern high computer technologies of construction to solve complex scientific-technical problems of new technologies development and new generation engineering creation. Skill of engineering tasks stating and computeraided design software (CAD-systems) applying in the process of buildings, structures and their components design; prepare the necessary set of production forms and records according to standards; be able to design building structures taking into account their strength, durability, resistance and safety, reliability and wear-resistance providing; ability of feasibility reports writing of

5 building structures under design. Knowledge of fundamentals of scientificpedagogical activity; skill of reports, speech, presentations preparing; have a high level of speaking culture; ability to take part in teaching and teaching-methodical work of the department and other teaching subdivisions, participate in courses curricula development; be able to deliver lectures, practical classes, laboratory classes, take part in students scientific-research work organization. Be competent in using methods of work with staff, quality estimation and operational efficiency methods; ability to estimate scientific-production staff activity expenses and results; be able to find the best decisions at developing competitive products; know how to use the whole complex of normative and law acts in the sphere of security dealing with professional activity. Be competent in using innovative approaches aimed at new high technologies development, introduction and commercialization; ability to develop plans and programs on innovative activity of scientific-production staff organization; know how to write feasibility reports of technical projects; skill of project development and implementation on integration of high school, academic and branch science aimed at innovative developments commercialization and introduction into high technology production enterprises; ability to participate in innovative process organization and implementation. Be skillful in consulting engineers-designers, designers, technologists and other workers of construction production companies on matters dealing with modern achievements of construction, and also introduction of high computer technologies (CAD/CAE-systems); skill of conducting scientifictechnical expert examination of calculation and experimental works. F Programme learning outcomes 1. Scientific-technical information collecting and processing, studying the newest national and foreign experience on the chosen problem of construction; analysis of the task in the field of construction based on literature sources choice and study, problems setting on construction. 2. Physical-mathematical, mathematical and computer models development

6 designated for conducting theoretical and calculation-experimental investigations and technical tasks of construction solving. 3. Preparation and carrying out of calculations and experimental research in the sphere of construction using classic and modern technical theories and methods, achievements of engineering and technologies, firstly by means of experimental equipment to do some mechanical tests, highly efficient computing systems and high computer technologies (CAD/CAE-systems) 4. Long-term research trends determination taking into account world tendencies of science and engineering development. 5. Scientific-technical work for scientific organizations, construction companies, business structures etc. doing 6. Making description of conducted research and projects under design; processing, analysis and interpretation of research results; data preparing for reports presentations, speeches, articles and other scientific-technical documents. 7. Preparation and delivering practical and laboratory classes, calculating practical work with students. 8. Building structures and buildings designing based on mathematical and computer-aided modelling aimed at providing their strength, durability, resistance and safety. 9. Building structures and buildings design using computer-aided design software (CAD-system) based on effective combination of modern CAD/CAEtechnologies and multi-choice CAE-calculations carrying out. 10. Feasibility reports of structures under design preparing. 11. Projects (their elements or assembly units) specifications making. 12. Doing some calculation-experimental research work on the analysis of certain construction objects features aimed at technological processes optimization 13. Participation in high technologies introduction into production, quality control of materials, building structures components and joint, systems of various purposes. 14. Work organization aimed at developing creativity of small teams engaged in the field of scientific-research and engineering design activity. 15. Participation in work on optimal decisions seeking at certain products development taking into account the requirements on strength, durability, safety measures, quality, cost, time of performance and competitiveness. 16. Plans on certain kinds of work development and their monitoring 17. Giving advice to engineers-designers, designers, technologists and other workers of building companies on matters dealing with modern achievements of construction, and also of high computer technologies (CAD/CAE-systems) introduction. 18. Conducting technical expert examination of calculation and experimental work in the field of construction, which were carried out in irrelevant organizations