Reproduction. Not for. Parts Manual. SPX Series Lawn Tractor & Mower Decks. Products
|
|
- Darren Roberts
- 7 years ago
- Views:
Transcription
1 Parts Manual Products Mfg. No. Description SPX, 23 Gross HP Lawn Tractor (2016) Mower Decks Mfg. No. Description " Mower Deck (2016) " Mower Deck (2016) SPX Series Lawn Tractor & Mower Decks Revision - Manual Part No. Rev. Date: 5/18/2016
2
3 Table Of Contents PRODUCT COMPONENTS Frame & Front Axle Group... 4 Steering Group... 8 Engine Group - 23 Gross HP Briggs & Stratton Transmission SERVICE PARTS - Hydro-Gear T2-CCHE-4X3B-1LX Transmission Group Controls Group Electrical Group Hood, Grille & Dash Group Seat Deck & Fuel Tank Group Lift Group - Frame Hung Wheels & Tires Group Decals Group " (107cm) Mower Deck - Housing, Arbors & Blades Group " (107cm) Mower Deck - Clutch Group " (107cm) Mower Deck - Height Adjustment & Roller Bar Group " (122cm) Mower Deck - Support Group " (122cm) Mower Deck - Clutch Group " (122cm) Mower Deck - Housing, Arbors & Blades Group Torque Specification Chart... Inside Back Cover PAGES
4 Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 4
5 Frame & Front Axle Group REF NO PART NO. QTY. DESCRIPTION SM 2 HUB CAP SM 2 RING, Klipring SM 4 WASHER, 3/ YP 1 AXLE, Front SM 3 FITTING, Zerk SM 2 BUSHING, Axle Pivot ASM 1 HOOK, Mower, Hitch SM 2 SCREW, Hex Flange, Whiz Lock, 7/16-14 x 1-1/ SM 1 PLATE, Axle Support SM 1 NUT, Hex Flange, Two Way Lock, 5/ NUT, Hex Flange, Whiz Lock, 5/ SM 2 SCREW, Hex Head, 3/8-16 x 1-1/4 GR SM 2 BUSHING YP 1 TIE ROD SM 2 WASHER, 5/ ASM 1 WHEEL SPINDLE ASSEMBLY, RH NUT, Hex Flange, Two Way Lock, 3/ YP 1 WHEEL SPINDLE ASSEMBLY, LH FRAME (Not a serviceable part) BMYP 1 SUPPORT, Front Footrest, RH YP 1 SUPPORT, Rear Brake SCREW, Hex Washer Head, Taptite, 5/16-18 x 5/ SCREW, Hex Flange, Whiz Lock, 5/16-18 x 3/ BMYP 1 SUPPORT, Front Footrest, LH SM 1 WASHER, 5/ SM 1 CAPSCREW, Hex Head, 5/8-11 x 3-1/4 GR YP 1 LINK, Drag (with Bearing), 5/ AYP 1 BRAKE PEDAL ASSEMBLY YP 1 LATCH, Brake Lock YP 1 WASHER, Shim BOLT, Shoulder, 5/16-18 x 1-1/8 GR SM 1 SPACER, Pivot AYP 1 FORWARD PEDAL ASSEMBLY SM 1 PEDAL, Reverse BOLT, Carriage, 5/16-18 x 1-1/4 GR SM 1 SPACER, Foot Pedal Footnotes 5
6 Frame & Front Axle Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 6
7 Frame & Front Axle Group REF NO PART NO. QTY. DESCRIPTION BMYP 1 ACTUATOR, RMO Switch YP 1 BRACKET, Pedal Pivot ASM 2 PLATE, Bearing SM 1 SUPPORT, Battery YP 1 LIFT SHAFT ASSEMBLY SM 1 BRACKET, Sector Support YP 1 GEAR, Steering SM 2 SPACER, Sector Gear SCREW, Hex Flange, Whiz Lock, 3/8-16 x NUT, Hex Flange, Whiz Lock, 3/ SM 2 SUPPORT, Transmission CAPSCREW, Hex Head, 5/16-18 x 1-1/4, GR SM 4 WASHER, 5/ NUT, Hex Flange, Two Way Lock, 5/16-18 Footnotes 7
8 Steering Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 8
9 Steering Group REF NO PART NO. QTY SM SM SM YP SM SM SM SM AYP 1 DESCRIPTION SHAFT, Steering Gear & Spline Yellow WASHER, 3/4 x 1 BUSHING, Steering STEERING WHEEL, UV-2 NUT, Hex Lock, ESNA Light, 5/8-18, Thin CAP, Steering Wheel, Plain RING, Klipring Extension CAPSCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8 TOWER Footnotes 9
10 Engine Group - 23 Gross HP Briggs & Stratton NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 10
11 Engine Group - 23 Gross HP Briggs & Stratton REF NO PART NO. QTY S G AYP ASM SM BMYP SM SM YP SM SM SM AYP SM SM SM SM SM AYP 1 DESCRIPTION * ENGINE, 23 Gross HP Briggs & Stratton Pro Series, VS Twin (Engine Model: 44S G5) HEAT SHIELD SCREW, Hex Washer Head, Taptite, 5/16-18 x 3/4 HEAT SHIELD MUFFLER SUPPORT, Muffler PIPE, Exhaust, RH PIPE, Exhaust, LH SCREW, Hex Head, Taptite, 1/4-20 x 1/2 CLIP, Wire CONTROL, Throttle CLAMP, Hose HOSE, Fuel (Cut to Fit) CLIP, Hose SCREW, Hex Washer Head, Taptite, 3/8-16 x 1 WASHER, External Tooth, 3/8 WASHER, Flat, ID x 7/8 OD PULLEY & HUB ASSEMBLY TIE, Self Lock GUIDE, Belt CLUTCH, Electric, Mid Ogura WASHER, Hex LOCKWASHER, Spring,.438 CAPSCREW, Hex Head, 7/16-20 x 3-1/2, GR5 GASKET, Exhaust SCREW, Hex Washer Head, Taptite, 3/8-16 x 1-1/4 SCREW, Hex SEMS, Lock Washer, 5/16-18 x 7/8 NUT, Flange, 5/16-18, GR5 PIVOT, Hood BOLT, Carriage, Short Neck, 5/16-18 x 1 SUPPORT, Muffler & Hood Footnotes Note* To verify your specific engine model, please reference the ID Tag located on your engine. See your local Briggs & Stratton distributor for parts and service. 11
12 Transmission SERVICE PARTS - Hydro-Gear T2-CCHE-4X3B-1LX1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 12
13 Transmission SERVICE PARTS - Hydro-Gear T2-CCHE-4X3B-1LX1 REF NO PART NO. QTY. DESCRIPTION * MAIN HOUSING * SIDE HOUSING ** SEAL, Lip, 1/2 x 1 x 1/4 (Included in Item 2050) * SCREW, Hex Washer, 1/4-20 x 1-1/ * PLUG, 9/ * BEARING, Journal * BOLT, Hex Flange, 3/ * PLATE, Bypass * CHECK PLUG & WASHER ASSEMBLY, * CHECK PLUG & WASHER ASSEMBLY * BASE, Filter * COVER, Filter * RING, Magnet * DEFLECTOR ** SEAL, Lip, 3/8 x 3/4 x 1/4 (Included in Item 2050) ** RING, Retainer, 3/8 (Included in Item 2050) * ROD, Actuator Bypass ** RING, Retainer, 3/4 (Included in Item 2050) * ARM, Bypass ** RING, Retainer, 3/8 (Included in Item 2050) * TRUNNION, Swash Plate ** SCREW, 5/16-18 x 1 (Included in Item 2050) YP 1 SHAFT, Input SM 1 BALL BEARING, 15 x 35 x SM 1 ** RING, Retaining Wire,.512 ID (Included in Item 2050) SM 1 * WASHER, Spacer, 1-15/64 x 9/ SM 1 ** SEAL, Lip, 15 x 35 x 7 (Included in Item 2050) ** RING, Retainer, 1-9/16, INT (Included in Item 2050) * KIT, Block, 7 Piston, 8cc * BEARING, Thrust Ball, 27 x 47 x * PISTON BLOCK ASSEMBLY SM 1 BEARING, Thrust Ball, 30 x 52 x ** RING, Retainer, 1/2, EXT (Included in Item 2050) * GEAR, 13T Pinion * SHAFT, Motor * WASHER,.60 x * GEAR, 10T / 48T * GEAR, Jackshaft, 10T * JACKSHAFT, Pin Footnotes Note* See your local authorized dealership for parts and warranty or contact Hydro Gear at (U.S Int'l 32 (0) ) 13
14 Transmission SERVICE PARTS - Hydro-Gear T2-CCHE-4X3B-1LX1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 14
15 Transmission SERVICE PARTS - Hydro-Gear T2-CCHE-4X3B-1LX1 REF NO PART NO. QTY. DESCRIPTION SM 3 WASHER, 7/16 x 1 x 1/ ** RING, Retainer, Spiral, 5/8, EXT (Included in Item 2050) * GEAR, Bevel, 12T, Spline OD * GEAR, Bevel, 12T, 1/2 OD * SHAFT, Axle, Keyed, 12-9/64 x 3/ * SHAFT, Axle, Keyed, 17-3/4 x 3/ * BUSHING, Inboard * BUSHING, Outboard * GEAR, 54T, Bull * PIN, Differential ** RING, Retainer, INT, Axle (Included in Item 2050) ** SEAL, Lip, 3/4 x 1-1/8 x 1/4 (Included in Item 2050) SM 2 PUCK, Brake * ROTOR, Brake SM 1 PLATE, Brake Puck * YOKE, Brake SM 2 PIN, Brake, 5/16 x 3/ SM 1 SPACER, Brake Torsion Spring, 1/4 x 9/ * SCREW, Patch, 1/4-20 x SM 1 SCREW, Patch, 1/4-20 x * SPRING, Compression, Brake, Anti-Drag * ARM, Brake * WASHER, 11/32 x 7/ SM 1 NUT, Castle, 5/ ** PIN, Cotter, 3/32 x 3/4 (Included in Item 2050) * SPRING, Brake Arm * FITTING, Hydraulic, O-Ring Adapter, 5/ * HOSE ** O-Ring,.103 x.299 ID (Included in Item 2050) * ARM, Control * BOLT, Hex Flange Head * WASHER, 11/32 x 7/8 (Duplicate of #131) * ROTATION ASSEMBLY * NEUTRAL ARM ASSEMBLY * BUSHING * SPRING, Extension YP 2 CLIP, Spring, Housing Thrust YP 1 E-TANK KIT (Includes ref # , , & ) TANK EXPANSION BOLT, x 1/ TUBE CAP, Barbed Vent YP 1 FAN & PULLEY KIT (Includes ref # , , , & ) * FAN, 7", 10 Blade Footnotes Note* See your local authorized dealership for parts and warranty or contact Hydro Gear at (U.S Int'l 32 (0) ) 15
16 Transmission SERVICE PARTS - Hydro-Gear T2-CCHE-4X3B-1LX1 NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 16
17 Transmission SERVICE PARTS - Hydro-Gear T2-CCHE-4X3B-1LX1 REF NO PART NO. QTY. DESCRIPTION * PULLEY, 4.4" * NUT, Nylock, 1/ * WASHER, OD Slotted * HUB, Pulley, 1-9/ YP 1 SEAL KIT (Includes items marked with **) Footnotes Note* See your local authorized dealership for parts and warranty or contact Hydro Gear at (U.S Int'l 32 (0) ) 17
18 Transmission Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 18
19 Transmission Group REF NO PART NO. QTY YP SM YP SM YP YP SM YP AYP YP DESCRIPTION * TRANSMISSION, Hydro Gear, T2-HP SCREW, Hex Flange, Whiz Lock, 5/16-18 x 2-1/2 NUT, Hex Flange, Whiz Lock, 5/16-18 ROD, Free Wheel PIN, Quick ROD, Speed Control CAPSCREW, Hex Head, 5/16-18 x 1-1/4 GR5 SPRING, Extension SPRING, Extension, 6-5/8" SPACER STRAP, Torque CAPSCREW, Hex Head, 5/16-18 x 2 GR5 SCREW, Hex Washer Head, Taptite, 5/16-18 x 3/4 V-BELT, Drive, HA, NUT, Hex Flange, ESNA, 5/16-18 WASHER, 5/16 CLIP, Hair Pin NUT, Hex Flange Lock, 5/16-18 Footnotes * Contact Hydro Gear for parts & service 19
20 Controls Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 20
21 Controls Group REF NO PART NO. QTY SM SM SM SM SM SM SM SM SM SM SM SM ASM SM SM SM SM SM YP YP 1 DESCRIPTION ROD, Cruise Latch, 5/16 Dia. x 2-13/16 Long LATCH, Cruise SPRING, Extension, 9/16 OD x 7-3/4 BOLT, Shoulder, 5/16-18 x 1-5/8, GR5 PULLEY, Idler, 3-1/8 OD, 3/8 ID NUT, Hex Flange Whiz Lock, 5/16-18 ROD, Brake Return, 5/16 Dia. x 12-5/8 Long PIN, Quick, 1-3/16 Long PEDAL, Brake NUT, Hex Flange, ESNA, 3/8-16 BOLT, Carriage, 5/16-18 x 1, G5 SPACER, Pivot 11/32 ID 1-3/4 OD BRACKET, Idler PULLEY, 3 OD, 3/8 ID SPRING, Extension, 1 OD x 7-1/2 BOLT, Carriage, 3/8-16 x 1-1/2, GR5 PAD, Foot Pedal, Forward PAD, Foot Pedal, Reverse ROD, Parking Brake, 1/4 Dia. x 16-3/8 Long ROD, Cruise Latch, 1/4 Dia. x 17 Footnotes 21
22 Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 22
23 Electrical Group REF NO PART NO. QTY YP SM SM YP SM YP SM YP ASM SM YP YP YP SM SM SM SM SM YP YP SM YP YP DESCRIPTION WIRING HARNESS * FUSE, Mini, 20 Amp (Included with Ref. No. 0010) SCREW, Hex Washer Head, Taptite, 5/16-18 x 5/8 BATTERY, 12 Volt, 230 CCA HOLD DOWN, Battery BOLT, Carriage, 1/4-20 x 7/8, GR5 WASHER, 1/4 x 27/32 PUSHNUT, 1/4 NUT, Hex Lock, 1/4-20, ESNA SOLENOID SCREW, Hex Washer Head, Taptite,1/4-20 x 1/2 PLUG, Hole 27/32 x 1-3/4 SWITCH, PTO SWITCH, RMO, Module Only SWITCH, Light SUPPORT, RMO Switch BOLT, Carriage, 5/16-18 x 3/4, GR5 NUT, Hex Flange Whiz Lock, 5/16-18 SWITCH, Push Button CABLE, Two Ring, #6 x 10 CABLE,#6 x 25 CABLE, # 6 x 26 LOCKWASHER, 1/4 NUT, Hex, Keps, 5/16-24 CAPSCREW, Hex Head, 1/4-20 x 3/4, GR5 WASHER, 1/4 x 5/8 OD NUT, Hex, 1/4-20 BOOT, Insulator Battery Terminal, Red TIE, Self Locking, 7-5/16 SWITCH, Push Button, NO, Black NUT, Hex Flange Whiz Lock, 1/4-20 KEY, No Mow Module (Yellow) CLIP, Panel PLUG, Dash, No Hourmeter SWITCH, Push Button, NC, Gray PLUG, Hole, 7/8 Dia. SWITCH, Ignition (Without key) KEY, Ignition Switch HARNESS, Headlight Footnotes Note* See your local hardware store for replacement fuses. 23
24 Electrical Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 24
25 Electrical Group REF NO PART NO. QTY YP SM SM 1 DESCRIPTION PLUG, Starter Insert BOOT, Insulator WASHER, Flat Footnotes Note* See your local hardware store for replacement fuses. 25
26 Hood, Grille & Dash Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 26
27 Hood, Grille & Dash Group REF NO PART NO. QTY. DESCRIPTION DYP 1 HOOD YP 1 AIR DUCT, Plenum YP 1 GRILLE, Front YP 1 INSULATION (Not Illustrated) AYP 1 BRACKET, Hood Pivot, LH AYP 1 BRACKET, Hood Pivot, RH BOLT, Carriage, 5/16-18 x YP 1 DASH YP 1 KNOB, Parking Brake YP 1 KNOB, Cruise SCREW, Thread Rolling, 5/16-18 x 3/ WASHER, Flat, 5/16, GR YP 1 COVER, Steering Shaft YP 1 LENS, Headlight, Left YP 1 INSERT, Headlight, Left YP 2 SCREW, Pan Head Phillips, #10-24 x 7/ YP 1 ROD, Dash Support, 10" NUT, Nylock, #10-24, GR YP 1 LENS, Headlight, Right YP 1 INSERT, Headlight, Right BMYP 1 BUMPER NUT, Flange Nylock, 5/ WASHER, Flat, 1/ YP 1 TRIM YP 8 SCREW, PT 7mm x 16mm MA 2 SOCKET * BULB, Incandescent (1141) Footnotes Note:* See your local hardware store for replacement bulbs. 27
28 Seat Deck & Fuel Tank Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 28
29 Seat Deck & Fuel Tank Group REF NO PART NO. QTY. DESCRIPTION DSM 1 SEAT DECK BOLT, Carriage, 5/16-18 x 3/4 GR NUT, Flange, 5/16-18, GR SM 1 PAD, Footrest, RH SM 1 PAD, Footrest, LH YP 1 TANK, Fuel YP 1 FITTING & HOSE ASSEMBLY SM 1 BUSHING, Fuel Tank GROMMET REMOTE VENT ASSEMBLY YP 1 CAP, Fuel YP 1 POD, LH SM 4 SPACER, 3/8 ID x 1-1/4 OD BMYP 1 SUPPORT, Seat BMYP 1 LATCH, Seat SM 4 SCREW, Hex Flange, Whiz Lock, 5/16 x 1-1/ WASHER, Flat, 5/16, GR SM 2 COVER, Spring NUT, Flange Nylock, 5/ SM 4 WASHER, Spring CJYP 1 BRACKET, Support, Seat Pivot SM 2 SPRING, Compression BOLT, Carriage, 5/16-18 x 3/4 GR BM 1 BRACKET, Seat Pivot SM 6 SCREW, Hex Washer Head, Taptite, 5/16-18 x 5/ BOLT, Flange, 5/16-18 x 1.150, GR YP 1 POD, RH SM 6 SCREW, Hex Washer Head, Plastite, 1/4 x 1/ SM 1 SUPPORT, Seat Deck SM 2 BOLT, Carriage, Short Neck, 5/16-18 x 7/8, GR YP 1 SEAT, 15" Back SM 1 GRIP GS 1 HOSE, Vapor, 5mm x 63" TIE, Self Lock DECAL, Evap (Not Illustrated) Footnotes 29
30 Lift Group - Frame Hung NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 30
31 Lift Group - Frame Hung REF NO PART NO. QTY SM SM SM ASM SM SM SM SM SM SM ASM SM SM SM SM MA SM SM SM ASM SM SM 1 DESCRIPTION ROD, Lift Handle, 18-7/8" SPRING, Torsion NUT, Hex Flange, Whiz Lock, 5/16-18 ARM, Rear Lift BOLT, Shoulder, 5/16-18 x 1/2 ROD, Lower Lift, 10" TRUNNION NUT, Hex Flange, ESNA, 3/8-16 NUT, Hex Flange, Whiz Lock, 3/8-16 CLIP, Hair Pin QUADRANT, Lift Height DECAL, Height Of Cut BOLT, Carriage, 1/4-20 x 5/8 G5 NUT, Hex Flange, Whiz Lock, 1/4-20 WASHER, 1/2 PIN, Threaded Shoulder, 3/8-16 x 1-7/16 SPACER, 3/8 ID x 5/8 OD x 7/16 CAPSCREW, Hex Head, 5/16-18 x 1 G5 WASHER, 5/16 CLEVIS, Lift SPACER, Pivot ROD, Lift, 5-1/2" Footnotes 31
32 Wheels & Tires Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 32
33 Wheels & Tires Group REF NO PART NO. QTY SM SM SM YP SM SM SM YP YP SM MA X3MA X195MA X160MA SM MA 2 DESCRIPTION WASHER, 3/4 x 1-5/8 OD x 1/8 Thick WHEEL & TIRE ASSEMBLY, Front FITTING, Lube, 1/4 BUSHING, 3/4" ID x 1.38" OD Hardened (2 per wheel) VALVE STEM & CAP WHEEL & BUSHINGS ASSEMBLY, Front (Includes Ref. Nos & ) TIRE, 15 x 6-6, Turf Rider TUBE, Tire WHEEL & TIRE ASSEMBLY, 20 x TIRE, 20 x 10-8, 2 Ply K358 VALVE STEM & CAP RIM, Wheel TUBE, Tire HUB CAP E-RING, 3/4D, 1/2T WASHER, Flat WASHER, Flat, 3/4 x 1-1/4 x 16 SPACER, 3/4 ID x 1-1/4 OD x 1.65 KEY, Square, 3/16 Footnotes 33
34 Decals Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart. 34
35 Decals Group REF NO PART NO. QTY YP YP YP SM SM YP YP YP 1 DESCRIPTION DECAL, Logo DECAL, Victa DECAL, Logo, Steering Wheel DECAL, Tunnel DECAL, Transmission Tow / Release Lever DECAL, Height of Cut DECAL, Discharge Safety (Use on 42" Mower Decks) DECAL, Danger (Use on 48" Mower Decks) DECAL, Mower Width, 42in/107cm DECAL, Mower Width, 48in/122cm Footnotes 35
36 42" (107cm) Mower Deck - Housing, Arbors & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart " Mower 36
37 42" (107cm) Mower Deck - Housing, Arbors & Blades Group REF NO PART NO. QTY. DESCRIPTION YP 1 HOUSING, Mower Deck, 42" Red YP 2 ARBOR ASSEMBLY SM 3 FITTING, Lube YP 1 HOUSING, w/lube Fitting YP 2 BEARING, Ball YP 1 SHAFT, Spindle YP 2 SHIELD, Arbor YP 2 SPACER, Bearing YP 2 RING, Self Locking BEARING, Seal BMYP 2 BLADE, 42" SM 4 WASHER, Spring SM 2 CAPSCREW, HexHead, 7/16-14 X 1, G SCREW, Taptite, 5/16-18 X 1" YP 1 SPACER, Pulley YP 2 PULLEY, CAPSCREW, Hex Head, 7/16-14 X1 3/4, G BOLT, Carriage, 3/8-16 X 1" NUT, Lock, Flange, 3/ YP 1 DEFLECTOR BMYP 1 BRACKET, Deflector SM 1 SPRING, Torsion YP 1 ROD, Pivot PUSHNUT, 1/ YP 1 CONNECTOR, Washout Port YP 1 ADAPTER, Washout Port SCREW, 5/16-18 X 3/ BMYP 1 COVER, Pulley, RH BMYP 1 COVER, Pulley, LH BMYP 1 PROP, Deflector BMYP 1 BAFFLE, Pinchoff NUT, Lock, Flange, 5/ BOLT, Carriage, 5/16-18 x 3/4, G5 Footnotes " Mower 37
38 42" (107cm) Mower Deck - Clutch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart " Mower 38
39 42" (107cm) Mower Deck - Clutch Group REF NO PART NO. QTY. DESCRIPTION RETAINER, 5/16 x 5/ BMYP 1 BRACKET, Idler NUT, Nylock Flange, 5/ SPACER, Idler BMYP 1 ARM, Idler SM 1 WASHER, Flat YP 1 PULLEY, Flat Idler, 4.5" WASHER, Flat, NUT, Hex Flange, 3/ GUARD, Spring SM 1 IDLER, Flat, SM 1 BOLT, Carriage, 3/8-16 x 2-1/4, GR SM 1 SPRING, Extension, 7.88 LG BOLT, Carriage, 5/16-18 x 3/4, GR SM 1 BOLT, Carriage, 3/8-16 x 2-1/2, GR BOLT, Carriage, 3/8-16 x 1-3/ YP 1 PULLEY, Idler YP 1 BELT, Aramid Footnotes " Mower 39
40 42" (107cm) Mower Deck - Height Adjustment & Roller Bar Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart " Mower 40
41 42" (107cm) Mower Deck - Height Adjustment & Roller Bar Group REF NO PART NO. QTY. DESCRIPTION SM 2 NUT, Hex Lock, ESNA Light, 1/ SM 2 SPACER, 1/2 ID x 7/8 OD x 1.185" ASM 1 HANGER, Front SM 1 ROD, Latch RETAINER, Pin Spring SM 1 ROD, Bail SM 4 BOLT, Wheel, 3/8-16 x 2-3/ SM 4 WHEEL NUT, Hex Flange, ESNA, 3/ BMYP 1 UPSTOP NUT, Hex Flange, Whiz Lock, 5/ BOLT, Carriage, Short Neck, 5/16-18 x 3/4, G WASHER,.516 x 1 Footnotes " Mower 41
42 48" (122cm) Mower Deck - Support Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart " Mower 42
43 48" (122cm) Mower Deck - Support Group REF NO PART NO. QTY. DESCRIPTION SCREW, Hex Washer Head, Taptite, 5/16-18 x 3/ WASHER, 1/2 ID x 1 OD SM 1 ROD, Bail SM 1 ROD, Latch SM 2 NUT, Hex Lock, ESNA, 1/ SM 2 SPACER, 1/2 ID x 7/8 OD x 1-3/16" ASM 1 HANGER, Front PIN, Retainer, 5/16 x BMYP 1 PLATE, Hitch Rod Lock MA 4 BOLT, Gage Wheel YP 4 GAUGE WHEEL NUT, 3/8-16 Hex Flange Lock BMYP 1 BRACKET, Upstop, Front NUT, Hex Flange, 5/ BOLT, Carriage, 5/16-18 x 3/4, GR PUSH NUT, Flat, 1/ SM 4 PLUG, Hole Footnotes " Mower 43
44 48" (122cm) Mower Deck - Clutch Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart " Mower 44
45 48" (122cm) Mower Deck - Clutch Group REF NO PART NO. QTY. DESCRIPTION WASHER, Flat SM 1 NUT, Hex Flange, 3/ BOLT, Carriage, 5/16-18 x 1-1/ SM 3 SPACER, 5/8 Long SM 1 SPRING, Extension NUT, Hex Flange, 5/ NUT, Hex Flange, 5/ WASHER, Flat SM 1 SPACER, 1.15 Long CAPSCREW, Hex Head, 3/8-16 x 2-1/4, GR YP 1 PULLEY, Idler NUT, Hex Flange, 3/ NUT, Hex Flange Large, 3/ SM 1 V-BELT, HA CAPSCREW, Hex Head, 5/16-18 x 1-1/4, GR YP 1 IDLER ARM ASSEMBLY (Includes Ref. No ) ZERK, Grease Footnotes " Mower 45
46 48" (122cm) Mower Deck - Housing, Arbors & Blades Group NOTE: Unless noted otherwise, use the standard hardware torque specification chart " Mower 46
47 48" (122cm) Mower Deck - Housing, Arbors & Blades Group REF NO PART NO. QTY. DESCRIPTION HOUSING, Mower Deck, 48" (122cm) Red SM 1 SPRING, Torsion YP 3 BLADE, 48" (122cm) SM 6 WASHER, Spring SM 3 PULLEY, BMYP 1 BRACKET, Deflector SPACER, Pulley YP 3 ARBOR ASSEMBLY SM 3 FITTING, Lube YP 1 HOUSING, w/lube Fitting YP 2 BEARING, Ball YP 1 SHAFT, Spindle YP 2 SHIELD, Arbor YP 2 SPACER, Bearing YP 2 RING, Self Locking YP 1 BEARING, Seal SCREW, Taptite, 5/16-18 x PUSHNUT, 1/ YP 1 ROD, Pivot YP 1 DEFLECTOR NUT, Lock, Flange, 3/ BOLT, Carriage, 3/8-16 x SM 2 CAPSCREW, Hex Head, 7/16-14 x 1-1/2, G SM 1 CAPSCREW, Hex Head, 7/16-14 x 2-3/ SCREW, Hex, 5/16-18 x 3/ SM 3 CAPSCREW, Hex Head, 7/16-14 x 1, G YP 1 ADAPTER, Washout Port YP 1 CONNECTOR, Washout Port SCREW, 5/16-18 x 3/ SPACER, Hub BMYP 1 COVER, Pulley, LH BMYP 1 COVER, Pulley, RH BAFFLE, Pinch Off BOLT, Carriage, 5/16-18 x 3/ NUT, Flange, 5/ BMYP 1 PROP, Deflector Footnotes " Mower 47
48
49
50
51
52 IT IS THE POLICY OF BRIGGS & STRATTON CORP. TO IMPROVE ITS PRODUCTS WHENEVER IT IS POSSIBLE AND PRACTICAL TO DO SO. WE RESERVE THE RIGHT TO MAKE CHANGES OR ADD IMPROVEMENTS AT ANY TIME WITHOUT INCURRING ANY OBLIGATION TO MAKE SUCH CHANGES ON PRODUCTS. Briggs & Stratton Power Products Group, LLC 3515 N. 124 Street / PO Box 702 Wauwatosa, WI USA
Reproduction. Not for. Coronet RD Series Riding Mowers. Parts Manual. 15.5HP Product. 17.5HP Product
Parts Manual 15.5HP Product Coronet RD Series Riding Mowers Mfg. No. Description 7800674 Coronet RD, 15.5HP Hydro (CE) 7800675 Coronet RD, 15.5HP Hydro (CE, FR) 17.5HP Product Mfg. No. Description 7800678
More information46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis
46431x92A Garden Tractor (1998) Page 1 of 16 Body Chassis 46431x92A Garden Tractor (1998) Page 2 of 16 Body Chassis 1 092546E701 Bracket, Seat 2 091963 Z Plate Assembly, Switch 3 164X26 Spring, Compression
More informationMini-ZT. Parts Manual. Models 915054-1540 915064-1534 915070-1534. 00462700 4/06 Printed in USA
Mini-ZT Parts Manual Models 0-0 0-00 - 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an
More informationYARD CRUISER HYDRO DRIVE SERIES 1 & 2
Parts Manual for YARD CRUISER HYDRO DRIVE SERIES 1 & MODELS YZ11BE YZ181BE YZ15BVE YZ158BVE TM CONTENTS DESCRIPTION PAGE(S) DESCRIPTION PAGE(S) WHEELS- REAR... CASTER, FRONT WHEEL & TIRE ASSM Y.... FRONT
More information1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45
DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431
More informationDR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX LLCH or LUAH) DR50 Hensim Dirt Runner 49cc Dirt Bike (VIN PREFIX
More informationCHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY
CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.
More informationILLUSTRATED PARTS LIST
TW400 WITH 390cc HONDA ENGINE 390cc 2 WHEEL DRIVE UTILITY VEHICLE ILLUSTRATED S LIST 390cc 2WD B O D Y D I A G R A M 390cc 2WD F R A M E D I A G R A M 390cc 2WD D R I V E T R A I N D I A G R A M DESCRIPTION
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002 842645048173 GASKET, CYLINDER 1 1 3 DR90-003
More informationDR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51
DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002
More information1/29/2008 DR70. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43
DR70 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 43 CYLINDER & CYLINDER HEAD 1 DR70-001 883099044472 CYLINDER 1 1 2 DR70-002 883099044489 GASKET, CYLINDER 1 1 3 DR70-003 883099044496
More informationBR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
Page 1 of 21 Product Information Baja Web > Product Information > Parts Lists > GOKART > BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM) BR150 Pmi Baja Reaction 150cc Go Kart (VIN PREFIX L4VM)
More informationENGINE Dinli 904 D1033-011
ENGINE Dinli 904 D1033-011 ENGINE Model Item Part no Description Specification Quantity 01 E140000-01 E14 ENGINE 450C.C. 1 FENDER SEAT D1033-021 FENDER SEAT Model Item Part no Description Specification
More informationDR ALL-TERRAIN FIELD and BRUSH MOWER
DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar
More informationSECTION VII PARTS BREAKDOWN
SECTION VII PARTS BREAKDOWN 21 REAR TINE TILLER MAIN ASSEMBLY ITEM # PART # QTY DESCRIPTION 1 SEE PAGE 25 1 ENGINE-RIGHT ANGLE DRIVE-PULLEY ASSEMBLY 2 SEE PAGE 27 1 FRAME-TRANSMISSION-HOUSING ASSEMBLY
More informationDR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PREFIX LLCH or LUAH)
Parts Lists - DR125 and DR150 Hensim Dirt Runner 125cc and 150cc Dirt Bike (VIN PR... Page 1 of 25 Product Information Baja Web > Product Information > Parts Lists > DIRTBIKE > DR125 and DR150 Hensim Dirt
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 1 of 16 Accessories www.ktoutdoor.com 12-600072F PRO MAC 850 SUPER CHAIN SAW 05/92 to Current IPL 215710-R1 Page 2 of 16 Accessories
More informationSection M POWER LIFTS
Section M POWER LIFTS December 2009 1M Index 1. 53-520244-000 Poly V Idler Assembly 2. 53-520205-000 N.A. Mounting Bracket 3. 53-520212-000 Cable Assembly 4. 53-600149-000 Wire Harness Assembly 5. 53-860322-010
More informationSERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A
PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 1 of 20 Carburetor Assembly www.ktoutdoor.com 13-600072-06 PRO MAC 8200 05/92 to Current IPL 215710-02 Page 2 of 20 Carburetor Assembly 214763-02
More informationILLUSTRATED PARTS LIST
CW11 / TW11 / TW11R WITH 340cc HONDA ENGINE 800-643-7332 amsportworks.com NOTE: Some part numbers vary by serial number. The serial number is located on a brass tag beneath the dump bed on the driver side.
More information2
10 MECHANICAL DRIVE SWING AWAY AUGER PARTS LIST SERIAL NOS. 70000-74773 1 2 # PART # DESCRIPTION 1 B198362 Boot Access Cover 2 B030500 Side Wind Jack 3 B003049 PTO Shaft - Constant Velocity 4 B027504 Boot
More information356 CHECKLIST ELECTRICAL: CHASSIS:
356 CHECKLIST ELECTRICAL: Headlights hi/lo beam Taillights Running lights Turn signals Brake lights License light(s) Fog lights Reverse light Horn Dome lights Dash lights Temp guage Tank level guage Tachometer
More information1/29/2008 DR125 / DR150. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55
DR125 / DR150 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 55 CYLINDER HEAD ASSY. 1 125-001 883099006937 CYLINDER HEAD COVER 1 1 2 125-002 883099006944 BOLT M6X28 2 3 3 125-003 883099006951
More information360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor
360 Automatic Chain Saw UT-10468 Page 1 of 15 Carburetor 360 Automatic Chain Saw UT-10468 Page 2 of 15 Carburetor 1 93205A 1 Repair Kit 2 93205A 1 Repair Kit 3 93205A 1 Repair Kit 4 93205A 1 Repair Kit
More informationC O N T E N T S 1 ABOUT THIS PARTS LIST... 2 ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP
C O N T E N T S 1 ABOUT THIS PARTS LIST... 2 2 CONTENTS-ENGINE ENGINE GROUP ENGINE GROUP... 3 3 CONTENTS-FRAME GROUP FRAME GROUP... 5 4 ENGINE PARTS LIST... 9 5 FRAME PARTS LIST...37 1 ABOUT THIS PARTS
More information2510/2550 Dust Control Burnisher
250/2550 Dust Control Burnisher Operator and Parts Manual TENNANT COMPANY Commercial Products 2875 RANSOM STREET HOLLAND MI 49424 U.S.A. FAX: 800 678 4240 CUSTOMER SERVICE: 800-982 7658 607597 Rev. 0 (2-00)
More informationRail 001 112 2 Canvas, folding top 001 101 3 Rear panel 001 102 4 Stip in window, left 001 106 dto. right 001 107
U 411 1 Rear view mirror, round, metall 13cm Ø 002 045 2 Raised airintake 002 060 3 Side panelling, front, left 002 030 Side panelling, front, right 002 031 4 Panelling left 002 051 dto. right 002 052
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 1 of 20 Accessories & Tools www.ktoutdoor.com 11-600072-02 PROMAC 800 CHAIN SAW 08/80 to 05/85 IPL 215724-01 Page 2 of 20 Accessories
More information11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories
11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 1 of 19 Accessories 11-600036D PRO MAC 60 07/72 to 12/76 IPL 89321 Page 2 of 19 Accessories 84453 Kit - Piston tool 69191 Kit - Pressure test adaptor
More informationVolkswagen B3 Passat Manual Transmission 02A 34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed. Gearshift cable/lever installing
34 Manual Transmission - Controls, Assembly (Page GR-34) 02A 5-speed Gearshift cable/lever installing Gearshift housing repairing Gearshift lever repairing lever/relay lever, installing Gearshift mechanism
More informationREPAIR PARTS MANUAL MODEL NO. PR160Y21RDP (MFG. ID. NO. 96142004500) Rotary Lawn Mower
REPAIR PARTS MANUAL MODEL NO. PR160Y21RDP (MFG. ID. NO. 96142004500) Rotary Lawn Mower For Parts and Service, contact our authorized distributor: call 1-800-849-1297 For Technical Assistance: call 1-800-829-5886
More informationAir Vantage 500 Kubota
Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies Illustration of Sub Assemblies P-625 P-625 RETURN TO MAIN INDEX PARTS LIST FOR Air Vantage 500 Kubota P-625-A
More informationK-39/K-39B. Drain Cleaning Machine. Ridge Tool Company/Elyria, Ohio, U.S.A.
K-/K-B A- AUTOFEED Cable Chuck Pan Head Screw # - () Chuck Adapter Nose Piece Spiral Ring () Hand Grip Sleeve Clamp Springs () Spacer Clips () Gasket Drum Front Drum Liner Screw # - x () Drum Back Power
More informationFLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B
Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter
More information3000, 4000, 4100, 7500, 7700
3000, 4000, 4100, 7500, 7700 Drum & Disc Brake Lathes s Identification READ these instructions before placing unit in service. KEEP these and other materials delivered with the unit in a binder near the
More informationIllustrated Parts List
Spicer Tandem Axles Illustrated Parts List AXIP0085a January 1994 Single Reduction, Dual Range, & Double Reduction Addendum 461, 462, 463, 521, 581 46,000-65,000 lbs Introduction Single Reduction w/wheel
More informationHC-3000 SERIES RAKE Parts Breakdown DURABILT INDUSTRIES, LLC - 1810 AIRPORT ROAD POCAHONTAS ARKANSAS 72455
HC-3000 SERIES RAKE Parts Breakdown 1 SPRING TOWER PARTS PAGE 4 RAKE WHEEL AND ARM PARTS PAGE 8 PIVOT PARTS PAGE 6 6 2,3,4 23 21 7 22 24 HUB & SPINDLE PARTS 8 THRU 20 HYDRAULIC PARTS PAGES 10 AND 12 1
More informationCHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR
CHAPTER 2 : STERLING MIDI JUNIOR AND STERLING MIDI JUNIOR FOUR Sterling Midi Junior is a transportable rear wheel drive, three or four wheel electric powered Scoota with pneumatic tyres, upolstered seat
More information125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN
SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x
More informationMAN - MERCEDES - BENZ
SAYFA: 1 10100 10102 10103 355 353 06 15 355 353 03 15 346 353 08 15 AXLE GEAR AXLE GEAR AXLE (WITH BUSHING TYPE) (WITH BUSHING TYPE) (WITH BUSHING TYPE) 2521 2517-2521-2622 10104 10105 10106 308 350 00
More informationUFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary
More information2003 ACCORD - Automatic Transmission Removal
2003 ACCORD - Automatic Transmission Removal Special Tools Required Engine support hanger, A and Reds AAR-T-12566 Engine hanger balancer bar VSB02C000019 Front subframe adapter VSB02C000016 These special
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 47 Brakes - Hydraulic Components (Page GR-47)
47 Brakes - Hydraulic Components (Page GR-47) FS III front brake calipers, servicing Front brake caliper piston, removing and installing FN 3 front brake calipers, servicing Front caliper piston, removing
More informationCLASS III TRUCK PARTS Baker
CLASS III TRUCK PARTS Baker Identify replacement parts for Baker PAL, PAL-AR, PAL-WR 7.2 Instant Access to 250,000 Parts and Growing Baker PAL, PAL-AR, PAL-WR 1 000 774-1033 Toggle 26 000 757-1050 Tie
More information2700 DUST CONTROL MACHINE:
700 DUST CONTROL MACHINE: 30016 PAGE 1 700 DUST CONTROL MACHINE: 30016 11 17 9 15 8 16 10 1 13 7 6 1 1 30 OLD STYLE BATERY BOX 8 3 5 3 7 0 18 19 31 3 9 5 1 FACTORY INSTALLED OPTIONS: 30011 ELECTRIC CLUTCH
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 604041 Base 1 4041 2 604042 Base Cover 1 4042 3 608849 Washer (M5) 2 4 600124 Spring Washer (M5) 2 5 600329 Rd Hd Machine Screw (M5x8) 2 6 604047 Strainer 1 4047 7 600204 Rd Hd Machine Screw (M6x10)
More informationTC 170 & TC 170 PD TRANSFER CASE
Automotive Corporation TC 170 & TC 170 PD TRANSFER CASE PARTS MANUAL Fabco Automotive Corporation, Livermore, CA Ph:(925) 454-9500 Fax:(925) 454-9501 1-(800) 967-8838 www.fabcoautomotive.com VII. PARTS
More information6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible
LINCOLN PREMIER LIMITED WARRANTY 6-years/75,000 miles Comprehensive coverage Subsequent Owner Warranty $100 Deductible Comprehensive Coverage Because Lincoln has always been a brand you can trust and respect,
More informationService Parts. John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF. Engine. Engine Models:
Service s Engine Engine Models: John Deere TO4039D 4039TL CD4039DF CD4039TF 4045DF 4045TF Generator Models: 20--40ROZJ/REOZJ 20--40DSJ/DSEJ 50/60ROZJ serial nos. 257821 and above 50/60REOZJ/REOZJB 50/60DSJ/DSEJ/DSEJB
More informationNumber Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)
1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8
More informationRange Road RR Series Semi-Automatic Firewood Processor. Crated Unit Assembly Manual
Range Road RR Series Semi-Automatic Firewood Processor Crated Unit Assembly Manual 1 1) Undo 8-18mm x 19mm Nuts and bolts, 2 on each leg of top frame 2) Lift top of Metal crate off and move out of work
More informationParts Manual for REAR ENGINE RIDER ACCESSORIES. DISC DRIVE SERIES X and 0 thru 21 HYDRO DRIVE SERIES 0, 1 & 2 YARD CRUISER SERIES 0, 1 & 2
Parts Manual for REAR ENGINE RIDER ACCESSORIES DISC DRIVE SERIES X and 0 thru HYDRO DRIVE SERIES 0, & YARD CRUISER SERIES 0, & COPYRIGHT 00 SNAPPER PRODUCTS INC. ALL RIGHTS RESERVED (Rev., 0/0/0) MANUAL
More informationTABLE OF CONTENTS DT7K INSTRUCTION MANUAL TABLE OF CONTENTS 1-19-00E DT7K
TABLE OF CONTENTS DT7K INSTRUCTION MANUAL SECTION 100 DESCRIPTION & SPECIFICATIONS 17459 INSTALLATION DIMENSIONS - DT7K 17384 MOUNTING HOLE TEMPLATE S14930 INSTALLATION DRAWING - 14930 MOUNTING PEDESTAL
More informationCOMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN
COMMON WEAR PARTS & QUICK REFERENCE PARTS BREAKDOWN SERIES MECHANICAL SWEEPERS pn GS328985 REV B MAY 2012 COPYRIGHT 2012 GLOBAL ENVIRONMENTAL PRODUCTS, INC. ALL RIGHTS RESERVED REV B MAY 2012 Page 2 Common
More informationPARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99
PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin
More informationPSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS
PSS10H/B PSS12H/A ILLUSTRATED PARTS LISTS AC AND DC GENERATOR SCHEMATIC ENGINE GENERATOR ASSEMBLY REF Description QTY PSS10 PSS12 1 Engine, Honda GX620K1VXC2 Code 637220 1 99779-000 GX670VXC2 Code 637220
More informationREEL LAWN MOWERS MASPORT 400-500-660
Issue A June 2009 REF # 719046 REEL LAWN MOWERS MASPORT 400-500-660 Part number Model Engine MASPORT 019036 400 RRR B & S Series 475 MASPORT 019044 400 RRR Honda GX160 MASPORT 019046 500 RRR B & S Series
More informationMODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK
1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 1 of 16 Tools & Accessories www.ktoutdoor.com 11-600016C MAC 110 01/77 to 02/83 IPL 95807-R2 Page 2 of 16 Tools & Accessories 95169 Kit - Spark Arrester
More informationOPERATION AND MAINTENANCE MANUAL WASP, Inc. Bag Cart Model No. A01154D Drawing No. A02022D
OPERATION AND MAINTENANCE MANUAL WASP, Inc. Bag Cart Model No. A01154D Drawing No. A02022D WASP RECORD OF REVISIONS REV. ISSUE DATE BY REV. ISSUE DATE BY NO. DATE INSERTED NO. DATE INSERTED Original 001
More informationK&T Saw Shop 606-678-9623 or 606-561-4983
11-600097F MINI-MAC 35AS 07/76 to 04/77 IPL 92754A-R1 Page 1 of 12 Accessories www.ktoutdoor.com 11-600097F MINI-MAC 35AS 07/76 to 04/77 IPL 92754A-R1 Page 2 of 12 Accessories 91753 Case - Carrying 88756
More informationEdge 28B. Simple. Clean. PARTS LIST KENT model: 908 4703 010 146 3087 000(1)2007-01
PARTS LIST KENT model: 908 4703 010 Simple. Clean. 2007-01 2 2007-01 TABLE OF CONTENTS 1 DESCRIPTION PLAN GENERAL VIEW 2-3 CHASSIS SYSTEM 4-5 SIDE BROOM ASSEMBLY 6-7 HOPPER SYSTEM 8-9 TRANSMISSION SYSTEM
More informationUNIVERSAL 1550 PRE-MIX DISPENSER
MODEL NO. 284974xxx 1 of 8 Control Code A ªIMI Cornelius Co., 1987-95 22 5 6 2 3 7 4 1 26 32 19 28 33 29 27 11 15 18 16 17 14 9 31 30 34 24 20 23 8 10 21 13 FIGURE 1. ASSEMBLY ªIMI Cornelius Co., 1987-95
More informationDYNA RIDER FOOTBOARD KIT
-J0 REV. 0-0-0 DYNA RIDER FOOTBOARD KIT GENERAL Kit Number 000 Models For model fitment information, see the P&A Retail Catalog or the Parts and Accessories section of www.harley-davidson.com (English
More informationREMOVAL AND INSTALLATION
303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214
More informationVolkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)
46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel
More informationDOOR PARTS SECTION D-1
DOOR PARTS SECTION D-1 1 11 10 11 9 8 1 1 7 6 10 5 4 D- DOOR ASSEMBLY ITEM NO DESCRIPTION QTY. PART NO 1 SERVICE DOOR ASSEMBLY ~ * CONTROL PANEL 1 * DOOR GUARD 1 * 4 DOOR ROLLER ASSEMBLY 1 1148-7 5 T-HANDLE
More informationVE17 DSP. Model: VE-17DS. Lista Części Polish
Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU
More informationModel 854/856. Operating and Assembly Manual. Palmor Products Inc. 5225 Serum Plant Road Thorntown, IN 46071
Model 854/856 Operating and Assembly Manual Palmor Products Inc. 55 Serum Plant Road Thorntown, IN 46071 3/31/2015 SAFETY RULES Remember, any power equipment can cause injury if operated improperly or
More informationDANGER DANGER. General Information. Safety Is Your Responsibility. Ordering Parts. Contact Information
Safety Safety Is Your Responsibility DANGER To avoid personal injury or death, carefully read and understand all instructions pertaining to the Anthony Liftgates product. Do not attempt to install, operate,
More informationOVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless)
OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 3 05 Litho In U.S.A. (cre) 1 Part No. Rev.A OVEN PARTS 1 Literature Parts 4455994 Installation Instructions Use & Care Guide 8300346 Microwave
More informationP498-2 For Model: NL498D2 PARTS CATALOG. Marine Generators Marine Diesel Engines Land-Based Generators
P498-2 For Model: NL498D2 PARTS CATALOG Marine Generators Marine Diesel Engines Land-Based Generators CALIFORNIA Proposition 65 Warning: Diesel engine exhaust and some of its constituents are known to
More informationPallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification
OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product
More informationContents. Description Page Description Page
Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder
More informationBigDog Mowers R Series Parts Manual
BigDog Mowers R Series Parts Manual 00 S. Ridge Road Hesston, Kansas 606 WARNING The engine exhaust from this product contains chemicals known to the state of California to cause cancer, birth defects
More informationReplacement Parts Catalog
Replacement Parts Catalog Replacement Parts Contents A-Class Right Hand 4 Model Printer Assemblies... 1 Cover Assembly (15-3021-01)... 2 Display Assembly (24-2605-01)... 3 Direct Thermal (78-2474-01)...
More informationNumber Wheeler P/N Description Set Rex P/N Notes
1 607051 Base 1 A050 2 607052 Motor Cover 1 A052 3 600778 Socket Hd Cap Screw (M8x60) 2 4 607053 Scrap Receiver 1 A053 5 607054 Tank Upper Cover 1 A054 6 607055 Oil Pot 1 A055 7 607056 Strainer 1 A056
More informationINSTALLATION INSTRUCTIONS. 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD IMPORTANT NOTES
INSTALLATION INSTRUCTIONS 6111 Air Spring Kit 2011+ Ford F250/F-350 Single Wheel 2WD 2011+ Ford F350 Dually 2WD Thank you for purchasing a quality Hellwig Product. PLEASE READ THIS INSTRUCTION SHEET COMPLETELY
More informationPET. Illustration 001-00. Pos Part Number Description Remark Qty Model. - 356 72 106 jack 1. - 356 72 108 operating rod 1. - 356 72 103 tool bag 1
Model 959 0 0 00-00 7 6:56.0.00 tool and accessories tool - 7 06 jack - 7 0 operating rod - 7 03 tool bag - 7 0 spark plug wrench - 0 A ring wrench 36 MM - - tyre pressure gauge L 709 0-999 57 05 0 rim
More informationEaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-5005C March 2003
Eaton Fuller Heavy Duty Transmissions Illustrated Parts List FS-00C March 00 For the most current information, visit the Roadranger web site at www.roadranger.com Contents How To Use The Illustrated Parts
More informationSouthern Columbia Area School District Bus/Automotive Parts for Sale. PartNo Description Vendor Amount 1 583966C91 EXHAUST CLAMP 1 2 905-09 PIPE 1
Southern Columbia Area School District Bus/Automotive Parts for Sale PartNo Description Vendor Amount 1 583966C91 EXHAUST CLAMP 1 2 905-09 PIPE 1 3 00025296 BACK UP LIGHTS 1 4 00109869 HARNESS Bus Parts
More informationK&T Saw Shop 606-678-9623 or 606-561-4983. 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories
12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 1 of 11 Accessories 12-400165 MC 91C 11/74 to 04/76 IPL 84456 Page 2 of 11 Accessories 68899 Piston Assy - 0.005 in. oversize 66790 Ring Set - Piston 0.005
More information1/29/2008 DB30S. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 14
DB30S Toll Free: 888-863-2252 PARTS AND PRICES ARE SUBJECT TO CHANGE 1 of 14 ENGINE Part UPC Number Description Baja Description 31 DB30S-100 883099115806 CLUTCH 1 1 32 DB30S-101 883099115813 ENGINE 1
More informationParts. Ultra 395/495/595t Ultra Max II 490/495/595t 309675V 120 VAC. 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure.
Parts Ultra 395/495/595t Ultra Max II 490/495/595t 309675V EN 3300 psi (228 bar, 22.8 MPa) Maximum Working Pressure 0 VAC Type Stand Series Lo-boy Series Hi-boy Series Ultra 395t 2339 B 233961 B 233962
More informationMÁQUINAS AGRÍCOLAS JACTO S.A. EDITION
AJ English version EDITION - 06/007 CODE - 9790 Parts catalog MÁQUINAS AGRÍCOLAS JACTO S.A. Rua Dr. Luiz Miranda, 650 7580-000 - Pompéia - SP - Brasil Tel.: +55 4 3405-00 - Fax: +55 4 345 306 E-mail: export@jacto.com.br
More informationFANG 24T, 26T and 28T -EU
Model: FANG 24T FANG 26T FANG 28T Lista Części Polish Spis Treści Solution tank 3 Recovery tank 5 Brush lift - Drive 7 Brush - Pad Drive 9 Solution Control 11 Brush skirt 13 Control housing 15 Squeegee
More informationGenerator Parts List. GXi Part Number. Model Year. 5650,5650EL, 6500, 6500EL, 4550 Pro, 7550EL Pro DEK, STANLEY
G01006 Air check valve for models 2006, G01107 Air filter Air filter module The air filter module comes with all the components ready to be assembled. The module includes the filter cover, filter media,
More informationBigDog Mowers Stout MP Parts Manual
BigDog Mowers Stout MP Parts Manual 00 South Ridge Road Hesston, Kansas 6706 WARNING The engine exhaust from this product contains chemicals known to the state of California to cause cancer, birth defects
More informationPARTS BOOK. hohner 48/5S. Stitcher Head. Vol.2 UB706016-01. 110407/hohner48/5S/01/KS
PARTS BOOK hohner /5S Stitcher Head 007/hohner/5S/0/KS Vol. UB70606-0 Hohner /5 Revision Control List Page / Correction (a: Parts No. c: Description d: S/N e: Remarks f: Other g: Registration h: Illustration
More informationFront axle components, overview
just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,
More informationCHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS
CHAPTER 12 : OXFORD MERMAID & RANGER HOIST PRODUCTS Sunrise Medical is ISO 9001 certified, which ensures quality at all stages of the development and production of this hoist. Contents MODEL SERIAL NO.
More informationILLUSTRATED PARTS LIST MODEL NO. 96041009900 CUSTOMER CATALOG NO. P11577RB PRODUCT NO. 960 41 00-99 532 42 34-40 12.11.08 BAD
ILLUSTRATED PARTS LIST MODEL NO. 904009900 CUSTOMER CATALOG NO. P5RB PRODUCT NO. 90 4 00-99 53 4 34-40..0 BAD DECALS 5 4 9 5 5 0 3 3 53 40 03-9 Decal, Operators 53 40-5 Decal, Hood RH 3 53 9-4 Decal, Warning
More informationSC351. Model: SC351 NIL. Part List US-English
Model: NIL Part List US-English Table of Contents GENERAL VIEW 3 COVER AND TANKS 5 FRAME SYST 7 HANDLE SUPPORT SYST 9 HANDLE SYST 12 MOTOR AND DECK SYST 15 BRUSH DECK SYST 17 ACCESSORIES 19 WIRING DIAGRAM
More informationAprilia.no. RS 50 96-98 Eng.6M
01 Carburettor - oil pump 02 Drive shaft 03 Head - piston 04 Primary gear shaft 05 Gearbox driven shaft 06 Selector 07 Clutch 08 Clutch cover 09 Right crankcase 10 Left crankcase 11 Ignition unit RS 50
More informationCOMMERCIAL GAS DRYER
COMMERCIAL GAS DRYER MODELS CGM2941TQ0 CGM2941TQ1 07 08 Litho in U.S.A. (LT)(mek) c 2008 WHIRLPOOL CORPORATION Part No. Rev. B BULKHEAD PARTS (White) (White) 2 BULKHEAD PARTS 1 Literature Parts 8563800
More informationILLUSTRATED PARTS LIST MFG ID NO. 96012004700 CUSTOMER CATALOG NO. PB19H42LT PRODUCT NO. 960 12 00-47. 401122 Rev.1 11.21.05 TR/VB
ILLUSTRATED PARTS LIST MFG ID NO. 960004700 CUSTOMER CATALOG NO. PB9H4LT PRODUCT NO. 960 00-47 40 Rev...0 TR/VB DECALS 7 6 4 4 3 0 0 9 6 4 93939 Decal Oper 3 664 Decal Hood LH 4 409 Decal Side Panel Logo
More informationrefrigeration SOFT SERVE #30CMT ICE CREAM MACHINE ELECTRO FREEZE HEAD ASSEMBLY BEATER SHAFT ASSEMBLY KEY PART # DESCRIPTION KEY PART # DESCRIPTION
Having your serial # ready before ordering ElectroFreeze parts, when calling our sales staff, will ensure speed & accuracy. 9 0 HEAD ASSEMBLY BEATER SHAFT ASSEMBLY EF Beater Shaft EF90 Cylinder Bushing
More informationGRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A.
GRAIN DRILLS PARTS CATALOG SUNFLOWER 9433 THREE - SECTION FOLDING GRAIN DRILL LITHO IN U.S.A. FORM NO. 79023737A JULY, 2005 1 FORWARD ALPHABETICAL INDEX The complete alphabetical index appears at the
More informationPARTS SECTION. Section MF4
PARTS SECTION Section MF4 Wheels, Steering, Axle; hubs, rims, steering pumps, ALLIS CHALMERS RADIATOR HOSE ALLIS CHALMERS RADIATOR HOSE 70243014 180, 185, 190, 190XT 70248233 180, 185, 190, 190XT Radiator
More information