Presentation 5: Steps to prevent worker exposure to nanomaterials in the workplace.

Size: px
Start display at page:

Download "Presentation 5: Steps to prevent worker exposure to nanomaterials in the workplace."

Transcription

1 Presentation 5: Steps to prevent worker exposure to nanomaterials in the workplace

2 Introduction Employers are responsible for the protection of workers health and safety, working with worker representatives in engaging employees Worker representatives and union representatives have a role in enforcing EU occupational health and safety legislation, including that related to chemicals in the workplace but do not have responsibility for this, and are not meant to lead these processes Despite the existence of European and national occupational safety and health legislation, practice in the workplace does not always respect these legal requirements Various tools exist to ensure worker health and safety protection, some of which have been adapted for nanomaterials Image:

3 1. The worker safety representative European legislation on occupational health and safety requires that workers or their representatives be involved in company activities relating to worker health and safety Worker health and safety is a national responsibility so each country has their own way of organising and naming worker safety representatives ( safety reps ) Safety reps are usually identified (by employers, by employees, by trade unions) as the employee representative in charge of workplace health and safety and working conditions they are the 1 st person to talk to about nano in the workplace Challenge: more than 99% of companies in Europe are SMEs and therefore do not likely have a worker health and safety representative Reference: ETUC Health, Safety and Risk Prevention ( files/ces-brochure_safety_reps-uk.pdf) Image:

4 2a. Risk assessment limits relating to nanomaterials information is not easily or always available When undertaking a nanomaterial risk assessment in their workplace, employers may therefore encounter difficulties related to: 1. insufficient information on the hazardous properties of nanomaterials; 2. no standardised methods and devices to measure exposure levels and to identify nanomaterials and emission sources; 3. limited information on effectiveness of risk reduction measures (filters, gloves, etc.); and 4. lack of information on presence of nanomaterials, in mixtures or articles (products) and down the user chain, when nanomaterials, or products containing nanomaterials, are used or processed. When in doubt, use the highest level of precau6on to prevent exposure Reference: EU OSHA E-facts 72: Tools for the management of nanomaterials in the workplace and prevention measures ( Image:

5 2b. Risk assessment nonetheless a 3-tiered approach Despite existing information gaps relating to nanomaterials, it is very important that employers undertake a risk assessment of nanomaterials as part of their potential introduction into the workplace When measuring nanomaterials (type, concentration levels) for risk assessments, employers need to address not only engineered nanomaterials (processgenerated as well as fractions of nanomaterials in conventional products) An upcoming OECD report suggests a 3-tiered approach to measuring and assessing potential exposure to airborne nanomaterials Risk assessment requires identifying the hazard of a substance (tier 1 gather information) Reference and image: OECD Harmonised Tiered Approach to Measure and Assess the Potential Exposure to Airborne Emissions of Engineered Nano- Objects and their Agglomerates and Aggregates at Workplaces cote=env/jm/mono%282015%2919&doclanguage=en

6 2b. Risk assessment nonetheless a 3-tiered approach Tier 1 information should provide details on the workplace, on the nanomaterial Reference and images: %20handling%20nanomats&products.pdf

7 2b. Risk assessment nonetheless a 3-tiered approach (cont/d) Second tier is to conduct a basic exposure or release assessment - determine whether exposure to nanomaterials can occur (using portable nanomaterial characterisation instruments and existing knowledge on the nanomaterial/s) Testing of background nanomaterial levels before performing task using nanomaterials, and testing during nanomaterial use If no important increase in nanomaterial levels when using nanomaterials, then go to documentation and archiving step If there is an increase and the source of the increase is known, go to additional risk management measures step If there is an increase and the source is not known, go to next step Reference and image: OECD Harmonised Tiered Approach to Measure and Assess the Potential Exposure to Airborne Emissions of Engineered Nano- Objects and their Agglomerates and Aggregates at Workplaces cote=env/jm/mono%282015%2919&doclanguage=en

8 2b. Risk assessment nonetheless a 3-tiered approach (cont/d) Third tier is to conduct a basic exposure or release assessment - determine whether exposure to nanomaterials can occur (using portable nanomaterial characterisation instruments and existing knowledge on the nanomaterial/s) Testing of background nanomaterial levels before performing task using nanomaterials, and testing during nanomaterial use If no important increase in nanomaterial levels when using nanomaterials, then go to documentation and archiving step If there is an increase and the source of the increase is known, go to additional risk management measures step If there is an increase and the source is not known, go to next step Reference and image: OECD Harmonised Tiered Approach to Measure and Assess the Potential Exposure to Airborne Emissions of Engineered Nano- Objects and their Agglomerates and Aggregates at Workplaces cote=env/jm/mono%282015%2919&doclanguage=en

9 Another example of nanomaterial risk assessment procedure Announcement 527 sets out different steps to take when assessing the risks associated with any nanomaterial Key aspects for assessing nanomaterial: Workers in laboratory conditions? Nanomaterial in liquid or solid matrix? Soluble nanomaterial? Nanoscale form detailed in SDS and no World Health Organisation fibre Is the specific toxicity known? Is it a GBP nanomaterial? Reference and image: Substances/TRGS/pdf/Announcement-527.pdf? blob=publicationfile&v=3 WHO fibre: ehc53.htm#partnumber:1

10 3. Safety data sheets Potential sources of information: labels (pictograms), SDSs, European Commission recommendations, occupational exposure limit values, and other sources such as scientific literature, public databases, etc. If the employer does not know that nano is present in the workplace, or has not (yet) done a risk assessment for the nanomaterial(s) used, the safety data sheet (SDS) is the best starting point for information SDSs may contain important worker health and safety information : Hazards identification Composition / information on ingredients (including safety information on surface chemistry to be indicated if the substance or mixture has certain dimensions in the nano range) Handling and storage Exposure controls and personal protection Basic physical and chemical properties (certain appearance properties need to be described for nanomaterials size, size distribution, shape, surface area (m 2 /mass), surface charge and crystalline phase). It can be indicated here if the substance is supplied as nanomaterial, e.g. physical state: solid (nanomaterial). Toxicological information Disposal information Transport information Other information (for nanomaterials, this involves safety information on redox potential, radical formation potential and photocatalytic properties) Reference: ECHA guidance on compilation of safety data sheets ( /13643/sds_en.pdf) Image: product_stewardship_eco/

11 4. Risk management measures After the elements of the risk assessment have been taken (hazard and exposure assessment), next comes risk management EU legislation provides general principles for preventing risks associated with hazardous chemicals* When nanomaterials cannot be eliminated from the workplace or substituted with less hazardous chemicals or ones that are not dangerous, some risk prevention and protection measures need to be assessed and put in place Reference and image: OECD Harmonised Tiered Approach to Measure and Assess the Potential Exposure to Airborne Emissions of Engineered Nano- Objects and their Agglomerates and Aggregates at Workplaces mono%282015%2919&doclanguage=en * Directive 89/391/EEC and Directive 98/24/EC

12 4. Risk management measures in brief detail Hierarchy of risk management measures: from elimination (of a hazardous substance) to its substitution to personal protective equipment (last) Due to continuing data gaps, hazard classifications of all nanomaterials are not available the risk assessment should provide a classification for the nanomaterial/s used in the workplace according to the nanomaterial itself, transferring knowledge about similar substances and characteristics (e.g. dustiness), and worker exposure assessment References: US Department of Health and Human Services, National Institutes of Health and National Institute of Environmental Health Sciences Training Workers on Risks of Nanotechnology Image:

13 4. Some examples of risk management measures The US Occupational Safety and Health Administration funded work on a series of presentations on nanomaterials in the workplace Here are a number of images they include in the presentation on Controlling Exposures to Nanomaterials (most of which laboratory-based) Reference:

14 Carbon nanotubes are produced in these enclosed furnaces Reference: Module 4: Controlling Exposure to Nanomaterials

15 Broader view of manufacturing containment Reference: Module 4: Controlling Exposure to Nanomaterials

16 Research containment Reference: Module 4: Controlling Exposure to Nanomaterials

17 Use of gloveboxes for containment Air sample Reference: Module 4: Controlling Exposure to Nanomaterials

18 Gloveboxes inside a Nanoparticle Containment Room Reference: Module 4: Controlling Exposure to Nanomaterials

19 Work practices and PPE still needed when enclosures are opened Harves'ng SWCNTs from a Carbon Arc Reactor Reference: Module 4: Controlling Exposure to Nanomaterials

20 Local exhaust ventilation (LEV) controls more hazardous exposures Reference: Module 4: Controlling Exposure to Nanomaterials 20

21 Personal Protective Equipment Overview Body Hand Eye Foot Respiratory Level A Level B Level C Level D Reference: Module 4: Controlling Exposure to Nanomaterials

22 Tyvec is the most widely used body covering for nano operations Reference: Module 4: Controlling Exposure to Nanomaterials

23 Hand protection when working with nanoparticles Gloves should be worn when handling nanomaterials (dry or wet) Glove material thickness is a major determinant of the protection provided Need also to consider what other substances (e.g. solvents) may be present within the workplace environment Two layers of gloves is recommended when handling high concern nanomaterials References: NIOSH Nanomaterial Production and Downstream Handling Processes EU DG Employment Guidance on the protection of the health and safety of workers from the potential risks related to nanomaterials at work - Guidance for employers and health and safety practitioners catid=716&langid=en&moredocuments=yes

24 Eye protection is also recommended Use of eye protec'on is recommended As a minimum, close fidng safety glasses should be used for all nanomaterials References: EU DG Employment Guidance on the protection of the health and safety of workers from the potential risks related to nanomaterials at work - Guidance for employers and health and safety practitioners catid=716&langid=en&moredocuments=yes

25 Use of respirators Respiratory protective equipment should only be used when all other reasonably practicable (collective) measures have been taken but have not achieved an adequate level of control If used with other measures (as a secondary precaution), disposable and halfmasks should have an appropriate assigned protection factor (APF) For tasks requiring masks to be worn a longer time, use of powered air flow designs should be considered All workers required to wear respiratory protective equipment should undergo facepiece fit testing and training to ensure correct fitting and proper use References: EU DG Employment Guidance on the protection of the health and safety of workers from the potential risks related to nanomaterials at work - Guidance for employers and health and safety practitioners catid=716&langid=en&moredocuments=yes

26 Other key elements This checklist was written for workplace activities with carcinogenic substances, which are applicable to nanomaterials Was a substitution test carried out? Is the result described in the risk assessment documentation? Has the use of a closed system been tested? Is the result described in the risk assessment documentation? Is the selection of technical protection measures in the risk assessment documentation? What was the level of exposure determined? With what result? Are ventilation system use requirements described in the risk assessment documentation? Has an action plan been drawn up to reduce stress? Is the plan implemented? Is there a list of potentially exposed workers? Are intensity, duration and frequency of stress documented? Is the long-term retention of the directory ensured? Are employees trained regularly with the operating instructions? Will they be informed of the extent of the cancer risk? Will they be informed of their right to information on occupational health checks? Is employee occupational health screening offered? Reference: /2013_krebserkrankungen.pdf

27 Key points to retain Employers are responsible for the protection of worker health and safety Workers are legally entitled to be informed of an involved in company decision-making that relates to worker health and safety There are a number of elements relating to risk management (risk assessment steps, risk management steps, and risk communication with workers) Measurements of chemicals in the workplace are legally required to be taken, and it is possible to measure nanomaterial concentrations in the air So Have these been respected in your company? Ensure that nanomaterials are included in your company s risk assessment activities If no nanomaterial risk assessment has been done, then contact the labour inspectorate Reference: /2013_krebserkrankungen.pdf Image:

Best Practices for Handling Nanomaterials in Laboratories

Best Practices for Handling Nanomaterials in Laboratories Best Practices for Handling Nanomaterials in Laboratories Much of the toxicology of nanomaterials is currently uncertain or unknown. Some nanosized particles are more toxic than their respective micron

More information

REACH and Safety Data Sheets

REACH and Safety Data Sheets This leaflet explains the requirements for safety data sheets and how they will change in the future. What is REACH? REACH (Registration, Evaluation, Authorisation and restriction of Chemicals) is the

More information

Safety Data Sheet. Product #: 300178. Aspira Scientific 521 Cottonwood Dr. Milpitas, CA 95035 408.571.1100 techsupport@aspirasci.com www.aspirasci.

Safety Data Sheet. Product #: 300178. Aspira Scientific 521 Cottonwood Dr. Milpitas, CA 95035 408.571.1100 techsupport@aspirasci.com www.aspirasci. Safety Data Sheet Aspira Scientific 521 Cottonwood Dr. Milpitas, CA 95035 408.571.1100 techsupport@aspirasci.com www.aspirasci.com Section 1: Product Identification Product Identifiers Product Name: L-

More information

Training Requirements for the Revised Hazard Communication Standard

Training Requirements for the Revised Hazard Communication Standard www.alterisus.com Training Requirements for the Revised Hazard Communication Standard As of December 1, 2013 OSHA revised its Hazard Communication Standard (HCS) to align with the United Nations Globally

More information

PolyOne FAQs for the Globally Harmonized System (GHS) Safety Data Sheets (SDS) and Product Labeling.

PolyOne FAQs for the Globally Harmonized System (GHS) Safety Data Sheets (SDS) and Product Labeling. General information on GHS and timelines Q1: What is GHS? GHS is short for Globally Harmonized System for Classification and Labeling of Chemicals, a framework designed to harmonize the very different

More information

Compilation of safety data sheets

Compilation of safety data sheets GUIDANCE IN A NUTSHELL Compilation of safety data sheets The document aims to explain in simple terms the main principles and obligations relating to the compilation and provision of safety data sheets

More information

Sodium Sulphite Anhydrous

Sodium Sulphite Anhydrous Revision date 08-04-2016 1.1 Product identifier Sodium Sulphite Anhydrous Section 1: Identification of the substance/ mixture and of the company/ undertaking. Product name Other names Sodium Sulphite Anhydrous

More information

DIAMOND POWDER - MICRON

DIAMOND POWDER - MICRON SAFETY DATA SHEET REVISION: 08/28/2015 DIAMOND POWDER - MICRON 1. PRODUCT & COMPANY INFORMATION 1.1 PRODUCT IDENTIFIER(S) PRODUCT NAME: DIAMOND POWDER - MICRON MICRON 5 CARAT PART # 100 CARAT PART# MICRON

More information

Overview of Key Obligations Under Regulation (EC) No. 1272/2008 on the Classification, Labelling and Packaging of Substances and Mixtures (CLP)

Overview of Key Obligations Under Regulation (EC) No. 1272/2008 on the Classification, Labelling and Packaging of Substances and Mixtures (CLP) Overview of Key Obligations Under Regulation (EC) No. 1272/2008 on the Classification, Labelling and Packaging of Substances and Mixtures (CLP) Summary This document examines the key aspects of the CLP

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Page 1 of 5 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Pfizer Inc Pfizer Pharmaceuticals Group 235 East 42nd Street New York, New York 10017 1-212-573-2222 Emergency telephone

More information

Material Safety Data Sheet. Calcium Lactate

Material Safety Data Sheet. Calcium Lactate Material Safety Data Sheet Calcium Lactate Section 1: Chemical Product and Company Identification Product Name: Calcium Lactate Pentahydrate Chemical Name: Calcium Lactate Pentahydrate CAS No.: 63690-56-21,

More information

Respiratory Safety and PPE Module 7. Special Warehouse Worker Hazards in Structural Steel Fabricating and Supply Companies

Respiratory Safety and PPE Module 7. Special Warehouse Worker Hazards in Structural Steel Fabricating and Supply Companies Respiratory Safety and PPE Special Warehouse Worker Hazards in Structural Steel Fabricating and Supply Companies Drawing from OSHA 3384-09 2011 1 Respiratory Safety and PPE OSHA Grant Information This

More information

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II and Regulation (EC) No. 1272/2008 (CLP) - Europe. Bona Wood Floor Cleaner

Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II and Regulation (EC) No. 1272/2008 (CLP) - Europe. Bona Wood Floor Cleaner Conforms to Regulation (EC) No. 1907/2006 (REACH), Annex II and Regulation (EC) No. 1272/2008 (CLP) - Europe 1. SAFETY DATA SHEET IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND OF THE COMPANY/UNDERTAKING

More information

SAFETY DATA SHEET EVO-STIK PLUMBERS MAIT

SAFETY DATA SHEET EVO-STIK PLUMBERS MAIT Revision Date November 2012 Revision 9 1 / 5 SAFETY DATA SHEET According to Regulation (EC) No 1907/2006 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier

More information

GHS CLP ATREAT. The new classification and labelling of hazardous chemicals. Providing a single source for your water treatment chemicals

GHS CLP ATREAT. The new classification and labelling of hazardous chemicals. Providing a single source for your water treatment chemicals GHS CLP The new classification and labelling of hazardous chemicals ATREAT Providing a single source for your water treatment chemicals Dear customer The current European system for classification and

More information

An illustrative example of the exposure scenarios to be annexed to the safety data sheet. Part 2: Example

An illustrative example of the exposure scenarios to be annexed to the safety data sheet. Part 2: Example An illustrative example of the exposure scenarios to be annexed to the safety data sheet Part 2: Example An illustrative example of the exposure scenarios to be annexed to the safety data sheet Part 2:

More information

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.0 Revision Date 02/27/2010 Print Date 08/25/2011

SIGMA-ALDRICH. Material Safety Data Sheet Version 4.0 Revision Date 02/27/2010 Print Date 08/25/2011 SIGMAALDRICH sigmaaldrich.com Material Safety Data Sheet Version 4.0 Revision Date 02/27/2010 Print Date 08/25/2011 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Product Number : G7253 Brand : Sigma

More information

CAS-No. EC-No. Index-No. Concentration Controlled Pore Glass - - - - May be harmful if inhaled. May cause respiratory tract irritation.

CAS-No. EC-No. Index-No. Concentration Controlled Pore Glass - - - - May be harmful if inhaled. May cause respiratory tract irritation. SIGMAALDRICH Material Safety Data Sheet Version 3.0 Revision Date 01/03/2009 Print Date 02/18/2009 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Glass beads, acidwashed Product Number : G8772 Brand

More information

SAFETY DATA SHEET (REACH regulation (EC) n 1907/2006 - n 453/2010)

SAFETY DATA SHEET (REACH regulation (EC) n 1907/2006 - n 453/2010) SAFETY DATA SHEET (REGULATION (EC) n 1907/2006 - REACH) Version 1.1 (24/02/2014) - Page 1/7 SAFETY DATA SHEET (REACH regulation (EC) n 1907/2006 - n 453/2010) SECTION 1 : IDENTIFICATION OF THE SUBSTANCE/MIXTURE

More information

SAFETY DATA SHEET BOSTIK AQUAGRIP 536

SAFETY DATA SHEET BOSTIK AQUAGRIP 536 Revision Date November 2014 1 / 6 SAFETY DATA SHEET BOSTIK AQUAGRIP 536 According to Regulation (EC) No 1907/2006 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1.

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Section 1 General Information Manufacturer: Rust-Oleum Corporation 11 Hawthorn Parkway Vernon Hills, IL 60061 24 Hour Assistance: 1-847-367-7700 www.rustoleum.com Date: April

More information

Exposure and Control of Ten High Priority MSHA Contaminants in Metal Mines. Presented by: Shannon E. Newton, MPH, CIH

Exposure and Control of Ten High Priority MSHA Contaminants in Metal Mines. Presented by: Shannon E. Newton, MPH, CIH Exposure and Control of Ten High Priority MSHA Contaminants in Metal Mines Presented by: Shannon E. Newton, MPH, CIH Topics What are these hazards? How can they harm you? Why do we care? How do we tell

More information

Safety Data Sheet. SECTION 1: Identification. SECTION 2: Hazard identification

Safety Data Sheet. SECTION 1: Identification. SECTION 2: Hazard identification Safety Data Sheet Copyright,2014Meguiar's, Inc. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing Meguiar's, Inc. products is allowed provided that:

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Regulation (EC) No 1907/2006 Version 3.0 Revision Date 01/09/2014 Date 13.03.2015 1. IDENTIFICATION OF THE MIXTURE AND COMPANY IDENTIFICATION 1.1 Product Tags Product Name: MetZyme

More information

External stakeholder events and projects on nanomaterials and nanotechnologies

External stakeholder events and projects on nanomaterials and nanotechnologies BUSINESS AND INDUSTRY ADVISORY COMMITTEE (BIAC) PART I: ACC The American Chemistry Council Nanotechnology Panel (Panel) presented at numerous national and international presentations and workshops on nanotechnology

More information

SAFETY DATA SHEET EVO-STIK GRIPFILL SOLVENT FREE (Irl)

SAFETY DATA SHEET EVO-STIK GRIPFILL SOLVENT FREE (Irl) Revision Date December 2014 SAFETY DATA SHEET According to Regulation (EC) No 1907/2006 1 / 6 SECTION 1: IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1. Product identifier Product

More information

Blootstelling aan nano op de werkplek: een werkelijk gevaar? Josje Arts AkzoNobel PS&RA

Blootstelling aan nano op de werkplek: een werkelijk gevaar? Josje Arts AkzoNobel PS&RA Blootstelling aan nano op de werkplek: een werkelijk gevaar? Josje Arts AkzoNobel PS&RA Definition of nanomaterial EU definition: "Nanomaterial" means a natural, incidental or manufactured material containing

More information

SAFETY DATA SHEET (REACH regulation (EC) n 1907/2006 - n 453/2010)

SAFETY DATA SHEET (REACH regulation (EC) n 1907/2006 - n 453/2010) SAFETY DATA SHEET (REGULATION (EC) n 1907/2006 - REACH) Date : 23/04/2015 Page 1/6 SAFETY DATA SHEET (REACH regulation (EC) n 1907/2006 - n 453/2010) SECTION 1 : IDENTIFICATION OF THE SUBSTANCE/MIXTURE

More information

Product Code: VLB4236 310ml cartridges. Substance Name EC No. CAS No. % by Wt Hazard Symbols n Butylacetate 123 86 4 10 30 10.

Product Code: VLB4236 310ml cartridges. Substance Name EC No. CAS No. % by Wt Hazard Symbols n Butylacetate 123 86 4 10 30 10. 1 Product and company identification Supplier: The Vapormatic Co Ltd PO Box 58, Kestrel Way Sowton Industrial Estate, Exeter, EX2 7NB, England Phone Number: 00 44 (0)1392 435461 Fax Number: 00 44 (0)1392

More information

Safety Data Sheet. SECTION 1: Identification. SECTION 2: Hazard identification

Safety Data Sheet. SECTION 1: Identification. SECTION 2: Hazard identification Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information

More information

Material Safety Data Sheet

Material Safety Data Sheet Product Name Supplier Synonym MSDS# Date of Preparation/Revision In case of emergency Material Safety Data Sheet Carbon Dioxide (Dry Ice) Section 1. Chemical product and company identification Physical

More information

CAS-No. EC-No. Index-No. Concentration Benzyl carbazate 5331-43-1 226-230-3 - -

CAS-No. EC-No. Index-No. Concentration Benzyl carbazate 5331-43-1 226-230-3 - - SIGMA-ALDRICH Material Safety Data Sheet Version 3.0 Revision Date 12/24/2008 Print Date 04/02/2009 1. PRODUCT AND COMPANY IDENTIFICATION Product name : Benzyl carbazate Product Number : 17307 Brand :

More information

: 3-Chloro-4-methoxybenzoic acid

: 3-Chloro-4-methoxybenzoic acid 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING Product name : 3-Chloro-4-methoxybenzoic acid Product Number : EX-002387 Brand : Exir Company : Exir GmbH Flotowgasse 18-22/2/1

More information

EMPLOYEE SAFETY TRAINING PROCEDURE

EMPLOYEE SAFETY TRAINING PROCEDURE UNIVERSITY OF ALASKA FAIRBANKS SAFETY SYSTEM POLICY AND PROCEDURE DOCUMENT NUMBER: 301 ISSUE DATE: SEPTEMBER 1996 REVISION DATE: APRIL 2003 SUBJECT: Employee Safety Training Procedure EMPLOYEE SAFETY TRAINING

More information

Hydrolyzed Hyaluronic Acid msds

Hydrolyzed Hyaluronic Acid msds Material Safety Data Sheet Hydrolyzed Hyaluronic Acid msds SAFETY DATA SHEET according to Regulation (EC) No.1907/2006 Version 2.0 Revision Date 12.30.2010 Print Date 4.10.2011 Section 1: Identification

More information

HAZARD COMMUNICATION: NEW LABEL ELEMENTS AND SAFETY DATA SHEET (SDS) FORMAT

HAZARD COMMUNICATION: NEW LABEL ELEMENTS AND SAFETY DATA SHEET (SDS) FORMAT HAZARD COMMUNICATION: NEW LABEL ELEMENTS AND SAFETY DATA SHEET (SDS) FORMAT AGENDA Hazard Communication Recent Changes Pictograms New Label Format Signal Word Safety Data Sheets 2 HAZARD COMMUNICATION:

More information

: Resin Fibre Discs - Aluminum Oxide, Zirconia Alumina

: Resin Fibre Discs - Aluminum Oxide, Zirconia Alumina Resin Fibre Discs - Aluminum Oxide, Zirconia Alumina SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name : Resin Fibre Discs - Aluminum

More information

ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.1200 HAZARD COMMUNICATION SECTION: 1700 REVISION DATE: 2/3/2012 REVISION: 4 NUMBER:

ALVERNIA UNIVERSITY OSHA REGULATION: 29 CFR 1910.1200 HAZARD COMMUNICATION SECTION: 1700 REVISION DATE: 2/3/2012 REVISION: 4 NUMBER: OSHA REGULATION: 29 CFR 90.200 HAZARD COMMUNICATION 700 : DATE: /3/200 DATE: 2/3/202 A. POLICY. This procedure follows requirements set forth in 29 CFR 90.200. 2. It is the policy of Alvernia University

More information

Experiencing REACH Exposure Assessments

Experiencing REACH Exposure Assessments Experiencing REACH Exposure Assessments By Debbie Lander, Ph.D. E. I. Du Pont de Nemours and Company EPA Computational Toxicology Communities of Practice January 27, 2011 2 Exposure Assessments under REACH

More information

Safety Data Sheet. Document Group: 10-4849-5 Version Number: 11.01 Issue Date: 05/26/15 Supercedes Date: 10/09/14

Safety Data Sheet. Document Group: 10-4849-5 Version Number: 11.01 Issue Date: 05/26/15 Supercedes Date: 10/09/14 3M FT-10 Qualitative Fit Test Kit, Sweet 05/26/15 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing

More information

SAFETY DATA SHEET ZANFEL VERSION 1.5.0

SAFETY DATA SHEET ZANFEL VERSION 1.5.0 SECTION 1: IDENTIFICATION Product Name: Zanfel Synonyms: Zanfel Wash For Poison Ivy, Oak & Sumac (Urushiol), Zanfel Poison Ivy Wash Manufacturer/Supplier: Zanfel Laboratories, Inc. Address: 6901 N. Knoxville

More information

Chemical Safety Assessment

Chemical Safety Assessment Guidance in a Nutshell Chemical Safety Assessment This document aims to explain in simple terms the main requirements under REACH regarding the Chemical Safety Assessment LEGAL NOTICE This document contains

More information

Hazard Identification, Risk Assessment And Control Procedure

Hazard Identification, Risk Assessment And Control Procedure Hazard Identification, Risk Assessment And Control Procedure 1. Purpose 1.1 To ensure that there is a formal process for hazard identification, risk assessment and control to effectively manage hazards

More information

GHS - GLOBALLY HARMONIZED SYSTEM

GHS - GLOBALLY HARMONIZED SYSTEM GHS - GLOBALLY HARMONIZED SYSTEM of Classification and Labelling of Chemicals GHS is a system proposed by the United Nations (UN) for the harmonised world-wide classification and labelling of chemical

More information

Safety Meeting Topic: Chemical Spills and Emergency Action Plans for General Industry

Safety Meeting Topic: Chemical Spills and Emergency Action Plans for General Industry Company Name: Safety Meeting ID: 16 Date: Grainger Safety Services Inc. 2012 Safety Meeting Topic: Chemical Spills and Emergency Action Plans for General Industry UPDATED: This safety meeting has been

More information

SAFETY DATA SHEET. 955 Connecticut Ave, Suite 5202 Bridgeport, CT 06607 Tel: 800-242-1150 www.carbtrol.com Date Prepared: July 22, 2015

SAFETY DATA SHEET. 955 Connecticut Ave, Suite 5202 Bridgeport, CT 06607 Tel: 800-242-1150 www.carbtrol.com Date Prepared: July 22, 2015 CARBTROL C O R P O R A T I O N SAFETY DATA SHEET Section 1 Identity Identity (As Used on Label and List): Carbtrol Type: CSV, CV, CSL, CL, CAT2 Manufacturers Name: Carbtrol Corporation 955 Connecticut

More information

GHS implementation in EU - The CLP Regulation -

GHS implementation in EU - The CLP Regulation - GHS implementation in EU - The CLP Regulation - Lennart Dock lennart.dock@kemi.se Swedish Chemicals Agency GHS Stocktaking Workshop for Central and Eastern Europe Chisinau, Republic of Moldova 7-9 July

More information

HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING

HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING HAZARD COMMUNICATION & THE GLOBAL HARMONIZING SYSTEM EMPLOYEE TRAINING This easy-to-use Leader s Guide is provided to assist in conducting a successful presentation. Featured are: INTRODUCTION: A brief

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Page 1 of 6 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Pfizer Inc Pfizer Pharmaceuticals Group 235 East 42nd Street New York, New York 10017 1-212-573-2222 Emergency telephone

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet SECTION 1 COMPANY AND PRODUCT IDENTIFICATION PRODUCT NAME Limestone, Crushed Stone SYNONYMS Aggregate, Manufactured Sand MANUFACTURER EMERGENCY PHONE NUMBER Revised: 28 June

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET MATERIAL SAFETY DATA SHEET 1. PRODUCT IDENTIFICATION 1.1 Product Name: Cyanogen Bromide Fibrinogen Fragments 1.2 Product REF: 459 1.3 Configuration: One (1) vial, 5.0 mg, lyophilized 1.4 Use of Product:

More information

SECTION 1 - PRODUCT IDENTIFICATION

SECTION 1 - PRODUCT IDENTIFICATION Product Identification Physical Data Hazardous Components Fire and Explosion Hazard Data Reactivity Data Health Hazard Information Spill or Leak Procedures Handling Information Special Protection Information

More information

1. PRODUCT AND COMPANY IDENTIFICATION

1. PRODUCT AND COMPANY IDENTIFICATION Safety Data Sheet Revision Date: 9/13/2014 SDS #: SDS-10226-01 1. PRODUCT AND COMPANY IDENTIFICATION Product Description: Hazardous Reagent None Product Code 51-17-02 51-17-01 51-17-04 51-17-03 Hazardous

More information

MSDS (Material Safety Data Sheet)

MSDS (Material Safety Data Sheet) Titanium, Mineral & Chemicals Tel 82-2-2675-5700 Fax 82-2- 2675-0576 E-Mail : tmc@tmc.co.kr Homepage : http://tmc.co.kr/ MSDS (Material Safety Data Sheet) Titanium Dioxide (TiO2) Rutile Section 1 : Product

More information

Risk management a practical approach

Risk management a practical approach Risk management a practical approach Introduction Preventing work related accidents and injuries is the primary concern for all those involved in health and safety. Work related accidents and injuries

More information

SAFETY DATA SHEET. (REACH regulation (EC) n 1907/2006 - n 2015/830)

SAFETY DATA SHEET. (REACH regulation (EC) n 1907/2006 - n 2015/830) SAFETY DATA SHEET (REGULATION (EC) n 1907/2006 - REACH) Date : 04/08/2015 Page 1/5 SAFETY DATA SHEET (REACH regulation (EC) n 1907/2006 - n 2015/830) SECTION 1 : IDENTIFICATION OF THE SUBSTANCE/MIXTURE

More information

SAFETY DATA SHEET. PC39: Cosmetics, personal care products. This product has no classification under CHIP.

SAFETY DATA SHEET. PC39: Cosmetics, personal care products. This product has no classification under CHIP. Page: 1 Compilation date: 14/05/2013 Revision date: 19/09/2013 Revision No: 4 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: 1.2.

More information

Sandblasting & Silica Exposure Control Plan

Sandblasting & Silica Exposure Control Plan Safety & Health Program 10627 Midwest Industrial Boulevard, St. Louis, MO Phone: 314-785-6425 Fax: 314-785-6426 Sandblasting & Silica Exposure Control Plan The purpose of this program is to inform interested

More information

Division of Public Health Administrative Manual

Division of Public Health Administrative Manual PURPOSE To establish a protocol for the development of a written Division of Public Health Hazard Communications Program at each applicable office or laboratory workplace and to assure that employees are

More information

LEGAL REVIEW & UPDATE

LEGAL REVIEW & UPDATE LEGAL REVIEW & UPDATE There are lots of laws and regulations designed to protect workers, the general public, and the environment. However, not everyone follows the laws. Many people deliberately break

More information

MATERIAL SAFETY DATA SHEET TOILET BOWL SANITIZER

MATERIAL SAFETY DATA SHEET TOILET BOWL SANITIZER MATERIAL SAFETY DATA SHEET TOILET BOWL SANITIZER No. 1 Date Issued: 07/03/2011 COMPANY DETAILS NAME: Hygiene Systems (Pty) Ltd EMERGENCY TEL: 0860 494 4363 ADDRESS: 7 Hargan Road, TEL: 011 552 8403 SECTION

More information

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. Section 2: Hazards identification Page: 1 Compilation date: 01/03/2012 Revision date: 22/04/2015 Revision No: 5 Section 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product name: 1.2.

More information

SAFETY DATA SHEET Revised edition no : 0 SDS/MSDS Date : 12 / 7 / 2012

SAFETY DATA SHEET Revised edition no : 0 SDS/MSDS Date : 12 / 7 / 2012 Page : 1 1. Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name : Product code : Identification of the product : NILE BLUE CHLORIDE CAS No :2381-85-3

More information

Ingredient CAS No Percent Hazardous --------------------------------------- ------------ ------------ --------- Aluminum Oxide 1344-28-1 90-100% Yes

Ingredient CAS No Percent Hazardous --------------------------------------- ------------ ------------ --------- Aluminum Oxide 1344-28-1 90-100% Yes ALUMINUM OXIDE MSDS 1. Product Identification Synonyms: AluminAR CC-10; Aluminum oxide; Alumina; activated Alumina; alpha-alumina CAS No.: 1344-28-1 Molecular Weight: 101.96 Chemical Formula: Al2O3 (contains

More information

WEEKLY SAFETY MEETING All Euramax Subsidiaries MATERIAL SAFETY DATA SHEETS (MSDS) Safety Meeting Contents. Meeting Notice.

WEEKLY SAFETY MEETING All Euramax Subsidiaries MATERIAL SAFETY DATA SHEETS (MSDS) Safety Meeting Contents. Meeting Notice. Safety Meeting Contents Meeting Notice Leaders Guide Employee Handout Employee Quiz Meeting Sign-In Sheet Employee Puzzle PRIOR TO THE WEEKLY MEETING: - Post the meeting notice by the timeclock - Read

More information

1.0 PRODUCT AND COMPANY INFORMATION

1.0 PRODUCT AND COMPANY INFORMATION SDS Number: 25 900 K449 Revision: C Page 1 of 5 1.0 PRODUCT AND COMPANY INFORMATION 1.1 Product name: Rat IP-10 (CXCL10)sStandard ABTS ELISA Development Kit Components:ssRabbit Anti-Rat IP-10 (CXCL10),sBiotinylated

More information

1 IDENTIFICATION OF THE PRODUCT. 1.2 Utilization of the substance/preparation Used for sports installations as the playing surface

1 IDENTIFICATION OF THE PRODUCT. 1.2 Utilization of the substance/preparation Used for sports installations as the playing surface Safety Information Sheet Tennis court surface 1 IDENTIFICATION OF THE PRODUCT 1.1 Identification of the substance or preparation Manto Tennis, Manto Avtivento, Sottomanto 1.2 Utilization of the substance/preparation

More information

PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION

PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION DRAFT SAMPLE WRITTEN PERSONAL PROTECTIVE EQUIPMENT HAZARD ASSESSMENT, EQUIPMENT SELECTION AND TRAINING DOCUMENTATION For Compliance With 1910.132 Wyoming General Rules and Regulations Wyoming Department

More information

MATERIAL SAFETY DATA SHEET

MATERIAL SAFETY DATA SHEET Page 1 of 5 1. IDENTIFICATION OF THE SUBSTANCE/PREPARATION AND THE COMPANY/UNDERTAKING Pfizer Inc Pfizer Pharmaceuticals Group 235 East 42nd Street New York, New York 10017 1-212-573-2222 Emergency telephone

More information

PRODUCT SAFETY DATA SHEET According to 91/155 EC 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING

PRODUCT SAFETY DATA SHEET According to 91/155 EC 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY / UNDERTAKING G.W.B.PRODUCT LTD, 276 YORK WAY, LONDON N79PH TEL:020 7619 1650 FAX:020 7609 9196 EMAIL:gwb@btconnect.com www.gwbproducts.co.uk -1-1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY /

More information

Safety Data Sheet. SECTION 1: Identification. SECTION 2: Hazard identification

Safety Data Sheet. SECTION 1: Identification. SECTION 2: Hazard identification Safety Data Sheet Copyright,2014,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information

More information

C162 Asbestos Convention, 1986

C162 Asbestos Convention, 1986 C162 Asbestos Convention, 1986 Convention concerning Safety in the Use of Asbestos (Note: Date of coming into force: 16:06:1989.) Convention:C162 Place:Geneva Session of the Conference:72 Date of adoption:24:06:1986

More information

Laboratory Work Risk Assessment

Laboratory Work Risk Assessment 1. Introduction Laboratory Work Risk Assessment The legislation governing Hazardous Substances and Dangerous Goods requires that all operations and experiments involving hazardous materials must have documentation

More information

Safety Data Sheet SOMAmer Reagent

Safety Data Sheet SOMAmer Reagent SECTION 1: Identification Safety Data Sheet SOMAmer Reagent 1.1 Product identifier Product name SOMAmer Reagent (aptamer) 1.2 Supplier s details Name Address Email SomaLogic, Inc. 2945 Wilderness Place

More information

92699, 92708, 92732, 53825, 53810, 53625. : D-55Y Yellow UV Leak Detection Dye Concentrate

92699, 92708, 92732, 53825, 53810, 53625. : D-55Y Yellow UV Leak Detection Dye Concentrate Revision date: : Version: 1.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Trade name Product code : D-55Y : D-55Y 1.2. Relevant identified

More information

Safety data sheet. according to 1907/2006/EC, Article 31. 1237800 Revision: 24.08.2012 Printing date: 25.06.2015

Safety data sheet. according to 1907/2006/EC, Article 31. 1237800 Revision: 24.08.2012 Printing date: 25.06.2015 Page: 1 / 5 01 Identification of the substance/mixture and of the company/undertaking Product identifier Trade name: Article number: new: 4000821 old: E-3725 CAS Number: 519156-32-2 Relevant identified

More information

CLP regulation & 2015 deadline for mixtures

CLP regulation & 2015 deadline for mixtures CLP regulation & 2015 deadline for mixtures CEFIC REACH Information and Experience Exchange Forum Zaventem, 18 December 2013 Maurits-Jan Prinz European Commission DG Enterprise & Industry Table of contents

More information

Health and Safety Executive

Health and Safety Executive Review of the adequacy of current regulatory regimes to secure effective regulation of The regulations covered by HSE Contents 1 The reason for the review 2 2 Background information 2 3 Is a nanomaterial

More information

Safety Data Sheet ANGSTRON MATERIALS, INC. PRODUCT NAME: N002-PDR. Inquiries: Fax Number: Telephone Number:

Safety Data Sheet ANGSTRON MATERIALS, INC. PRODUCT NAME: N002-PDR. Inquiries: Fax Number: Telephone Number: Page: 1 of 6 1. PRODUCT AND COMPANY IDENTIFICATION Generic Description: Nano Graphene Platelets MANUFACTURER: Angstron Materials, Inc. 1240 McCook Avenue Dayton, Ohio 45404 Inquiries: Fax Number: Telephone

More information

REACH Understanding the Risk Assessment Process

REACH Understanding the Risk Assessment Process _experience the commitment TM REACH Understanding the Risk Assessment Process Introduction Across virtually every segment of society, we witness how chemicals have delivered significant benefits to society.

More information

HSE: Frequently Asked Questions

HSE: Frequently Asked Questions HSE: Frequently Asked Questions Q1 - What is GHS? A GHS refers to the United Nations (UN) Globally Harmonised System of Classification and Labelling of Chemicals. The UN published GHS in its publication

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Agar-agar MSDS 0 He a lt h Fire Re a c t iv it y Pe rs o n a l Pro t e c t io n 0 A Section : Chemical Product and Company Identification Product Name: Agar-agar Catalog Codes:

More information

SAFETY SIGNAGE PROCEDURE

SAFETY SIGNAGE PROCEDURE Page 1 of 10 SAFETY SIGNAGE PROCEDURE 1.0 PURPOSE 1.1 To enable a reference to signage to meet legislative requirements and ensure in cases of emergency appropriate signage is visible. 2.0 SCOPE 2.1 This

More information

Risk Assessment of nanomaterials from an industry perspective. Jenny Holmqvist

Risk Assessment of nanomaterials from an industry perspective. Jenny Holmqvist Risk Assessment of nanomaterials from an industry perspective Jenny Holmqvist European Chemical Industry Council - Cefic We are the forum and the voice of the chemical industry in Europe With a Brussels

More information

Material Safety Data Sheet

Material Safety Data Sheet Material Safety Data Sheet Product Name: LIQUITEX BASICS Product Family: 1. Chemical Product and Company Identification ColArt Americas, Inc. EMERGENCY TELEPHONE NUMBER: 11Constitution Ave. 1-800-628-3885

More information

MATERIAL SAFETY DATA SHEET SECTION 1. IDENTIFICATION OF SUBSTANCE AND CONTACT INFORMATION

MATERIAL SAFETY DATA SHEET SECTION 1. IDENTIFICATION OF SUBSTANCE AND CONTACT INFORMATION Merck Animal Health One Merck Dr. Whitehouse Station, NJ 08889 MATERIAL SAFETY DATA SHEET Merck urges each user or recipient of this MSDS to read the entire data sheet to become aware of the hazards associated

More information

Environmental Safety Division University of Georgia Right to Know Training

Environmental Safety Division University of Georgia Right to Know Training Course Overview All UGA employees are required to have basic Right To Know training for their protection. This course is designed to familiarize you with the basics of the Right to Know law covering university

More information

LISLE CORPORATION. Safety Data Sheet Issued: May 25, 2015 Supersedes: March 15, 2014. Page 1. Section 1 - PRODUCT AND COMPANY IDENTIFICATION

LISLE CORPORATION. Safety Data Sheet Issued: May 25, 2015 Supersedes: March 15, 2014. Page 1. Section 1 - PRODUCT AND COMPANY IDENTIFICATION LISLE CORPORATION Section 1 - PRODUCT AND COMPANY IDENTIFICATION Safety Data Sheet Issued: May 25, 2015 Supersedes: March 15, 2014 1.1 Product Identifiers Product Name Combustion Leak Detector Fluid Product

More information

Product Safety Information

Product Safety Information Product Safety Information 1. Identification of the Product and Supplier Product name: Product application: Address/Phone No.: Contact person: RW-Füller - Production of mortars and castables. - Production

More information

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Hazard communication

The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Hazard communication The Globally Harmonized System of Classification and Labelling of Chemicals (GHS) Hazard communication The contents of this presentation have been updated according to the sixth revised edition of the

More information

SAFETY DATA SHEET Sorex Wasp Nest Destroyer MK II

SAFETY DATA SHEET Sorex Wasp Nest Destroyer MK II 01. PRODUCT AND COMPANY IDENTIFICATION Trade Name Product Code Intended Use INSE96001a Approved under The Control of Pesticides Regulations 1986 (as amended) for the control and destructions of the nests

More information

Safe Nanotechnology EU Industrial Research

Safe Nanotechnology EU Industrial Research Safe Nanotechnology EU Industrial Research Georgios Katalagarianakis EC, Research DG Industrial Technologies Directorate G4 Nanoscience - Nanotechnology 1 summary Policy; Towards a second Action Plan 2010-2015

More information

MATERIAL SAFETY DATA SHEET (MSDS)/SAFETY DATA SHEET (SDS)

MATERIAL SAFETY DATA SHEET (MSDS)/SAFETY DATA SHEET (SDS) I. Product and Company Identification Product Name: VetScan FeLV-FIV Test A point of care blood diagnostic product Part Numbers: 250-0000-5, 250-0000-25 Manufactured For Abaxis By: SA Scientific, Inc.

More information

1-Bromo-2,5-dimethoxybenzene

1-Bromo-2,5-dimethoxybenzene 1. IDENTIFICATION OF THE SUBSTANCE/MIXTURE AND OF THE COMPANY/UNDERTAKING 1.1 Product identifiers Product name : 1-Bromo-2,5-dimethoxybenzene Product Number : EX-000823 Brand : Exir CAS-No. : 25245-34-5

More information

GEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT

GEORGIA INSTITUTE OF TECHNOLOGY ENVIRONMENTAL HEALTH AND SAFETY PERSONAL PROTECTIVE EQUIPMENT PURPOSE To protect the health and welfare of GEORGIA TECH employees in areas where there may be a risk of injury or exposure to hazardous substances or conditions employees who work in areas where physical

More information

SIGMA-ALDRICH. SAFETY DATA SHEET Version 3.15 Revision Date 01/16/2014 Print Date 01/22/2014

SIGMA-ALDRICH. SAFETY DATA SHEET Version 3.15 Revision Date 01/16/2014 Print Date 01/22/2014 SIGMA-ALDRICH sigma-aldrich.com SAFETY DATA SHEET Version 3.15 Revision Date 01/16/2014 Print Date 01/22/2014 1. PRODUCT AND COMPANY IDENTIFICATION 1.1 Product identifiers Product name : Bovine Serum Albumin

More information

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. KaVo Everest ZS-Blanks und Ronden

SAFETY DATA SHEET. Section 1: Identification of the substance/mixture and of the company/undertaking. KaVo Everest ZS-Blanks und Ronden SAFETY DATA SHEET Section 1: Identification of the substance/mixture and of the company/undertaking Product identifier Trade name or designation of the mixture REACH Registration Number KaVo Everest ZSBlanks

More information

Unit 3.4 Decontamination (Core)

Unit 3.4 Decontamination (Core) INSTRUCTOR GUIDE Unit 3.4 Decontamination (Core) INSTRUCTOR GUIDE TERMINAL OBJECTIVE Given scenarios involving hazardous materials/wmd incidents, the participant shall identify when emergency decontamination

More information

Product Identification Numbers 62-3779-7230-2, 62-3779-7232-8, 62-3779-7234-4, 62-3779-9132-8, 62-3779-9330-8, 62-3779-9335-7, 62-3779-9830-7

Product Identification Numbers 62-3779-7230-2, 62-3779-7232-8, 62-3779-7234-4, 62-3779-9132-8, 62-3779-9330-8, 62-3779-9335-7, 62-3779-9830-7 Safety Data Sheet Copyright,2015,3M Company. All rights reserved. Copying and/or downloading of this information for the purpose of properly utilizing 3M products is allowed provided that: (1) the information

More information