check Butterfly valves soft seated Butterfly valves Ptfe seated Butterfly valves for hot air/smokes double eccentric Butterfly valves BOLOGNA
|
|
- Adrian Bruce
- 7 years ago
- Views:
Transcription
1 check valves
2 disc type GA - GB Series 1 GA GB GB 02 head losses 4 temperature/pression 4 GN - GT Series 5 GN GN GN GT GT GT head losses 6 temperature / pressure 6 springs table 6 GH Series 7 GH GH head losses 8 temperature / pressure 8 springs table 8 swing type GS Series 9 GS GS GS GS 015 with spring 9 dimensions table 10 head losses 10 temperature/pression 10 rate of flow 10 Ghibson Italia srl reserves the right to make alterations to this catalog and/or the equipment produced without prior notice and accets no liability in this regard.
3 GA 015 DN /2-4 Features and Advantages: Little dimensions and low weights Face to face acc.to DIN EN Series 49 (DIN 202 K4). Opening pressure from 20 to 500 mbar. Usable also as vacuum breacker, overpressure and bottom valve. No leakage with soft seat and acc.to DIN 20 BN with metal seat. Low head losses. GB 015 DN /2-4 To be installed in any position: Upwards flow Horizontal flow Downwards flow GA 015 DN /2-4 Features: Certifications: DN 15/100: P max: 52 Bar Flange: DN PN 6 40, A DN 100 PN 10 40, A [PED] 2 1 C 4 2a A L D B A B C D L Kg This type of valve cannot be used with spirometallic packing. item q.ty part material 1 1 body A51 - CF8M (AISI 16) 2 1 disc -standard A240 (AISI 16L) 2A 1 on request A240 (AISI 16L) + NBR A240 (AISI 16L) + EPDM A240 (AISI 16L) + FKM 1 seat disc on request 4 1 spring -standard on request A182 (AISI 16) A182 (AISI 16) + PTFE AISI 16 Hastelloy C4 minimum opening pressure with standard springs flow mbar mbar mbar without spring mbar special spring table 50 mbar Y Y Y Y Y Y Y Y Y 100 mbar Y Y Y Y Y Y Y Y Y 200 mbar Y Y Y Y Y Y Y Y Y 00 mbar Y Y Y Y Y Y Y Y Y 500 mbar Y Y Y Y Y Y N N N Y = available / N = not available Opening values may vary ±10% CH sede 06/16 PTFE - EN - page it 11
4 GB 015 DN /2-4 Features: DN 15/100: P max: 52 Bar Flange: DN PN 6 40, A DN 100 PN 10 40, A This type of valve can be used with API 601 spirometallic packings only with finishing of "Face A" (see dimensions) Stock finish AARH 250/500. No leakage with soft seat and acc.to DIN 20 BN with metal seat. Certifications: 0497 [PED] A Face A C GB 015 item q.ty part material 1 1 body A51 - CF8M (AISI 16) 2 1 disc -standard A240 (AISI 16L) 2A 1 on request A240 (AISI 16L) + NBR A240 (AISI 16L) + EPDM A240 (AISI 16L) + FKM 1 spring standard AISI top ring A240 (AISI 16L) E L D A B minimum opening pressure with standard springs flow mbar mbar mbar without spring mbar na na na na na na na na na GB 015 A B C D E L Kg CH sede 06/16 PTFE - EN - page it 22
5 GB 02 DN /2-4 Features: Flange: DN PN Max working pressure: 6 Bar Max working temperature: 180 C This type of valve cannot be used with spirometallic packing. stainless steel spring Certifications: 0497 [PED] 1 5 (note) 2 4 PTFE pipe On request spring can be coated with a PTFE pipe sealed at the end. Note: assembly GB 02 with PN6 / ANSI150 flanges is possible without stainless steel jacket. GB 02 item q.ty part material 1 1 body 2 1 disc 1 seat 4 1 spring on request Hastelloy C4 AISI 16+PTFE AISI 16+Niflon 5 1 jacket AISI 04 screw tightening torque Nmt M12 M12 M12 M16 M16 M16 M16 M16 8x M Note for installation: Centre the valve carefully before tightening the flanges. Tighten the flange screws by applying the torque values shown nearby. Remember to cross tighten the screws. These values are measured at room temperature with new screws and lubrificated threads. special spring table 50 mbar Y Y Y Y Y Y Y Y Y 100 mbar Y Y Y Y Y Y Y Y Y 200 mbar Y Y Y Y Y Y Y Y Y 00 mbar Y Y Y Y Y Y Y Y Y 500 mbar Y Y Y Y Y Y N N N Y = available / N = not available Opening values may vary ±10% A B2 L C B1 minimum opening pressure with standard springs flow mbar mbar mbar w/o spring mbar A B B C L GB 02 Kg CH sede 06/16 PTFE - EN - page it
6 GA 015 GB 015 GB 02 Head losses (H 2 O - 20 C - horizontal flow, standard spring) mbar GA mbar 0, m /h DN15 GB 015 DN20 DN25 DN2 DN40 DN50 DN65 DN80 DN mbar 0, m /h DN15 GB 02 DN20 DN25 DN2 DN40 DN50 DN65 DN80 DN , m /h DN15 DN20 DN25 DN2 DN40 DN50 Formula for calculation of equivalent flow rate to H 2 O Qe = Q d DN65 DN80 DN100 Values indicated in this table are only for informations For different liquid, gas or steam head losses are determined by equivalent water flow rate, as follows: Qe equivalent water flow (m /h o l/s) Q fluid flow (m /h o l/s) d fluid specific gravity (Kg/m ) Temperature - pressure diagram a NBR Tmax = 95 C b EPDM Tmax = 10 C d spring AISI 16 Tmax = 270 C e spring HASTELLOY C4 Tmax = 50 C c FKM PTFE Tmax = 200 C 60 B a b c d e 50 B GB B 8 B c 40 B 0 B GA015 6 B GB02 20 B 4 B 10 B 2 B 0 B 0 C 50 C 100 C 150 C 200 C 250 C 00 C 50 C 400 C 0 B 0 C 50 C 100 C 150 C 200 C 250 C CH sede 06/16 PTFE - EN - page it 44
7 GN GN GN 115 DN /2-4 Features and Advantages: Little dimensions and low weights. Face to face acc. to DIN EN Series 52 (DIN 202 K5) Opening pressure from 20 to 500 mbar. No leakage with soft seat; acc. to DIN 20 BN with metallic seat. Low head losses. Usable also as vacuum breaker, overpressure and bottom valve. GN GN GN 115 Pmax: 52 Bar Flange: DN PN 10 40, A This type of valve cannot be used with spirometallic packing. GT GT GT 115 DN /2-4 To be installed in any position: Upwards flow Horizontal flow Downwards flow GT GT GT 115 Pmax: 160 Bar Flange: DN PN 6 160, A This type of valve cannot be used with spirometallic packing. GN GT 011 GN GT 015 GN GT 115 item q.ty part material material material 1 1 body zinc plated steel A105 A182 (AISI 16) Hastelloy B574/ disc -standard A240 (AISI 16L) A240 (AISI 16L) Hastelloy B574/99 1 O Ring NBR FKM 4 1 spring -standard on request AISI NBR FKM AISI 16 Hastelloy C4 NBR FKM Hastelloy C seat A182 (AISI 16) A182 (AISI 16) Hastelloy B574/99 Certifications: [PED] minimum opening pressure with standard springs flow 2 mbar mbar mbar without spring mbar GT Series A B C L Kg A B L C GN series A B C L Kg CH sede 06/16 PTFE - EN - page it 55
8 GN GN 015 GT GT 015 GN GT 115 Head losses (H 2 O - 20 C - horizontal flow, standard spring) mbar GN - GT , m /h DN15 DN20 DN25 DN2 DN40 DN50 Formula for calculation of equivalent flow rate to H 2 O Qe = Q d Temperature - pressure diagram DN65 DN80 DN B a b c d e Values indicated in this table are only for informations. For different liquid, gas or steam head losses are determined by equivalent water flow rate, as follows: Qe equivalent water flow (m /h o l/s) Q fluid flow (m /h o l/s) d fluid specific gravity (Kg/m ) 150 B 120 B GT 90 B 60 B 0 B GN 0 B 0 C 50 C 100 C 150 C 200 C 250 C 00 C 50 C 400 C a NBR Tmax = 95 C b EPDM Tmax = 10 C c FKM PTFE Tmax = 200 C d spring AISI 16 Tmax = 270 C e spring HASTELLOY C4 Tmax = 50 C GN and GT valves can be inserted between following flanges: SF LF/SF DM LT/ST RTJ special spring table 50 mbar Y Y Y Y Y Y Y Y Y 100 mbar Y Y Y Y Y Y Y Y Y 200 mbar Y Y Y Y Y Y Y Y Y 00 mbar Y Y Y Y Y Y Y Y Y 500 mbar Y Y Y Y Y Y N N N Y = available / N = not available Opening values may vary ±10% Application of GT valves with ANSI RTJ flanges: DF LG/SG SM LM/SM N.B: when ordering always indicate type of flange. CH sede 06/16 PTFE - EN - page it 66
9 GH GH 015 DN Features and Advantages: Little dimensions and low weights. Face to face acc. to DIN EN Series 49 (DIN 202 K4). Opening pressure from 10 to 500 mbar. Usable also as vacuum breaker, overpressure and bottom valve. No leakage with soft seat. acc. to DIN 20 BN with metallic seat. Low head losses. To be installed in any position: Upwards flow Horizontal flow Downwards flow GH GH 015 P max: 25 Bar Flange: DN PN 10 25, A150 This type of valve cannot be used with spirometallic packing. Certifications: 0497 [PED] GH 011 GH item q.ty part material material 1 1 body zinc plated steel A51 - CF8M (AISI 16) seat A240 (AISI 16L) A240 (AISI 16L) 1 disc A240 (AISI 16L) A240 (AISI 16L) 4 1 spring -standard on request AISI 16 AISI 16 Hastelloy C O-Ring NBR FKM NBR FKM 6 4 screw A182 (AISI 16) A182 (AISI 16) 7 1 spring housing A182 (AISI 16) A182 (AISI 16) 8 4 screws A4 (AISI 16) A4 (AISI 16) 9 4 studs A182 (AISI 16) A182 (AISI 16) DN A B C L A L C GH 011 Kg GH 015 Kg B CH sede 06/16 PTFE - EN - page it 77
10 GH GH 015 Head losses (H 2 O - 20 C - horizontal flow, standard spring) mbar GH DN125 DN150 DN200 Formula for calculation of equivalent flow rate to H 2 O Qe = Q d 100 m /h Values indicated in this table are only for informations. For different liquid, gas or steam head losses are determined by equivalent water flow rate, as follows: Qe equivalent water flow (m /h o l/s) Q fluid flow (m /h o l/s) d fluid specific gravity (Kg/m ) Temperature - pressure diagram a NBR Tmax = 95 C b EPDM Tmax = 10 C d spring AISI 16 Tmax = 270 C e spring HASTELLOY C4 Tmax = 50 C c FKM PTFE Tmax = 200 C 0 B a b c d e 25 B 20 B 15 B 10 B 5 B 0 B 0 C 50 C 100 C 150 C 200 C 250 C 00 C 50 C 400 C minimum opening pressure with standard springs flusso DN mbar mbar mbar without spring mbar Opening values may vary ±10% Y = available N = not available special spring table DN mbar Y Y Y 20 mbar Y Y Y 0 mbar Y Y Y 50 mbar Y Y Y 100 mbar Y Y Y 200 mbar Y Y Y 00 mbar Y Y Y 500 mbar Y Y Y CH sede 06/16 PTFE - EN - page it 88
11 Swing type GS GS 015 DN /4-20 Features and Advantages: Little dimensions and low weights. Easy mounting between flanges with any packing. To be installed with vertical (only upwards) or horizontal flow. For downwards fluids spring version is to be used. No leakage with soft seat; acc. to API 598 with metallic seat. DIN EN Series 97 Low head losses. GS GS 015 Flanges: DN PN 6 16, A150 - P max:25 Bar DN ANSI 00 - P max:52 Bar Certifications: 5 NOTE 1: In these pages you will find the description of the standard swing check valves. On request different materials can be supplied (Aluminium- Bronze, Hastelloy, Monel, Duplex, etc.). NOTE 2: The standard GS valve cannot be installed between flanges with spirometallic packings. For this application the body finishing must be modified and the O.rings removed. Please contact our technical department for assistance [PED] To be installed in two positions: 2 4 Horizontal flow Upwards flow GS 011 GS 015 item q.ty part material material 1 1 body zinc plated steel AISI clapet AISI 16 (DN ) zinc plated steel (DN ) AISI 16 standard type -4 1 O.ring NBR (BUNA) FKM (VITON) NBR (BUNA) FKM (VITON) screw AISI 16 AISI spring AISI 16 AISI pin AISI 16 AISI screw AISI 16 AISI spring type 4 2 CH sede 06/16 PTFE - EN - page it 99
12 Swing type GS GS 015 D B E D A This data sheet describes the standard production. For valves with different rating (max ANSI 1500), please contact our technical department PN 6 PN 10 PN 16 ANSI 150 Kg ANSI 00 DN A D E B D E B D E B D E B max D E B Kg Head losses (H 2 O - 20 C - horizontal flow) mbar 200 GS a NBR Tmax = 95 C b EPDM Tmax = 10 C c VITON PTFE Tmax = 200 C 20 DN50 DN65 DN80 Temperature - pressure diagram m /h DN100 DN125 DN150 DN200 DN250 DN00 DN50 DN400 DN450 DN500 Values indicated in this table are only for informations. Formula for calculation of equivalent flow rate to H 2 O 0 B a b c 25 B For different liquid, gas or steam head losses are determined by equivalent water flow rate, as follows: 20 B 15 B 10 B Qe = Q d Qe Q equivalent water flow (m /h o l/s) fluid flow (m /h o l/s) 5 B 0 B 0 C 50 C 100 C 150 C 200 C 250 C CH sede 06/16 PTFE - EN - page it d fluid specific gravity (Kg/m )
S GATE KNIFE GATE VALVE WITH PNEUMATIC ACTUATOR
MAIN FEATURES The pneumatic S GATE knife gate valve is intended for the automatic shut off of pipes of the heavy fluids like slurries and powders. The main fields of application are the water treatment,
More informationGD200 01 07 Valves Rubber Lined - Centric Fout! Onbekende naam voor documenteigenschap. PRODUCT DATA. General Description BUTTERFLY VALVE
DESIGN Body U section wafer type End Connection EN 1092 PN 6, 10 and 16 ASME B16.5 cl. 150 / B16.47 cl. 150 MSS SP 44 cl. 150 AWWA C207 cl. B, D and E BS 10 table D and E Face to Face EN558-1/2 Series
More informationSelf-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23
Self-operated Pressure Regulators Universal Pressure Reducing Valve Type 41-23 Application Pressure regulators for set points from 5 mbar to 28 bar Valves in nominal sizes DN 15 to 100 Nominal pressures
More informationSolenoid valves 2/2-way direct-operated Type EV210A
Solenoid valves 2/2-way direct-operated Type EV210A Features EV210A NC and NO Very compact valves for industrial application, such as control and dosage For water, oil, compressed air and similar neutral
More informationBWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS
BWX SERIES BUTTERFLY VALVE FOR CRYOGENIC APPLICATIONS The BWX series butterfly valve has been especially designed for use in cryogenic applications with high quality CrNi steel. Testing of the valve includes
More informationSize : Ends : Min Temperature : Max Temperature : Materials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 32/40 to DN 1000 Between flanges GN10/16, ASA150 up to DN600-10 C + 110 C ( 130 C temporarily ) Max Pressure : 16 Bars up to DN300 Specifications :
More informationPilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel)
OPTIONS: USE: AVAILABLE MODELS: Pilot Operated Pressure Reducing Valve PRV 47 (Steel) PRV47I (St.Steel) DESCRIPTION The ADCA PRV47 pilot operated pressure reducing valves are designed for use on steam,
More informationPneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a
Pneumatic Control and Shut-off Butterfly Valve Pfeiffer Type BR 14b/31a and Type BR 14c/31a Application Tight-closing, double eccentric butterfly valve for process engineering and plants with industrial
More informationCompact. Performance. Safety Relief Valves Serie 437 Serie 459. The-Safety-Valve.com
Compact Performance Safety Relief Valves Serie 437 Serie 459 EXTENDED CATALOG The-Safety-Valve.com Valve Finder How to find the right Product Group High operating to set pressure ratio, high backpressure
More informationSelf-operated Temperature Regulators Temperature Regulator Type 1u
Self-operated Temperature Regulators Temperature Regulator Type u Application Temperature regulators for cooling installations Control thermostats for set points ) from 0 to 250 C G ½ to G or DN 5 to 50
More informationNozzle Check Valves. NOREVA nozzle check valves are used
Nozzle Check Valves NOREVA nozzle check valves are used in applications where the reverse flow of a fluid has to be avoided. These valves are suitable for all kind of liquid and gaseous fluids and fire
More informationAPI Flanged Safety Relief Valves Series 526 CATALOG
API Flanged Safety Relief Valves Series 26 CATALOG The-Safety-Valve.com 1 Valve finder How to find the right product group High operating to set pressure ratio, high backpressure or low total height? Yes
More informationQLM and QLD Series Three-port Control Valves
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationMaterials : Cast iron body
Size : Ends : Min Temperature : Max Temperature : DN 50 to DN 500 Between flanges ISO PN10-10 C + 90 C Max Pressure : 10 Bars up to DN 200 Specifications : Non rising stem and handwheel Bidirectional tightness
More informationCRN5-5 A-FGJ-G-E-HQQE 3x230/400 50HZ
GRUNDFOS DATA BOOKLET CRN5-5 A-FGJ-G-E-HQQE 3x23/4 5HZ Grundfos Pump 96517184 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn5/96517184/crn-5-5-a-fgj-g-e-hqqe.html
More informationSeated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange
Seated valves (PN 16) VF 2 2-way valve, flange VF 3 3-way valve, flange Description VF 2 VF 3 VF 2 and VF 3 valves provide a quality, cost effective solution for most water and chilled applications. The
More informationAssisted lift operated 2/2-way solenoid valves Type EV250B
MAKING MODERN LIVING POSSIBLE Data sheet Assisted lift operated 2/2-way solenoid valves Type EV250B EV250B with assisted lift can operate from zero and up to 10 bar differential pressure. This 2/2-way
More informationDOUBLE GATE KNIFE GATE VALVE
DOUBLE GATE KNIFE GATE VALVE The model knife gate is a bi-directional valve widely used in the Pulp and Paper industry (recycling or secondary fibre processing) designed to handle high concentrated or
More informationP.E.D. 97/23/EC/0424 Butterfly Valves Series SL, SLK Group 1-2 Class I, II, III ATEX CE Ex II 2 GD
1. GENERAL 1.1 CONSTRUCTION Small size and light construction gives advantage in installation, stocking and transporting. Sizes from DN 300 to 600 are equipped with ears, which helps the centering of the
More informationTypes 66R and 66RR Low-Pressure Relief Valves
November 2009 Types 66R and 66RR Low-Pressure Relief Valves W1953 W1908 TYPE 66R RELIEF VALVE TYPE 66RR RELIEF VALVE Figure 1. Typical Constructions Introduction Types 66R and 66RR low-pressure throttling
More informationFlow controller with integrated control valve (PN 16, 25, 40*) AFQM, AFQM 6 - return and flow mounting
Data sheet Flow controller with integrated control valve (PN 16, 5, 40*) AFQM, AFQM 6 - return and flow mounting Description AFQM 6 DN 40, 50 AFQM DN 65-15 AFQM DN 150-50 AFQM(6) is a self-acting flow
More informationPressure & Flame Protection
Pressure & Flame Protection Safety Relief Valves Safety Relief Valves WB SERIES SPRING LOADED SAFETY RELIEF VALVES The WB is designed safely relieve excess pressure in pumps, pipework, tanks, calorifiers,
More informationPneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP
Pneumatic Shut-off Butterfly Valve Type 3335/31a SRP or DAP Application Tight-closing butterfly valve for process engineering and industrial applications DN 50 to 300 NPS 2 to 12 Nominal pressure PN 10
More informationISORIA. Centered disc butterfly valves with AMRING elastomer liner. 240 PSI: 1½ to8. 150 PSI : 10 to 24
Type series booklet 8448.1/2-EN--US ISORIA Centered disc butterfly valves with AMRING elastomer liner 240 PSI: 1½ to8 150 PSI : 10 to 24 Design in accordance with ISO 10631 Manual, electrical, pneumatical
More informationValves dimension of pressure (lbs) ANSI2500 ANSI1500 ANSI900 ANSI600 ANSI300 ANSI150. Inch. from 1/2 up to 6
+SBF CARBON STEEL Type: ball valve SBF ANSI B16.5 Body: round Material: A105/F316 Ball seats: from DN13 up to DN150 O-Rings: NBR, FKM, EPDM, MVQ Operating pressure: 20 Bar - 50 Bar - 100 Bar 150 Bar -
More informationCRANE. Σελίδα 1 από 2. Dimensions and Weights. Weight (kg) Size
CRANE Σελίδα από 2 DM93 Variable Orifice Double Regulating Valve PN6 Cast Iron Balancing Valve (VODRV), Flanged to BSEN 92-2 The DM93 variable orifice double regulating valves will give satisfactory performance
More informationCRN32-2-2 A-F-G-E-HQQE 3x400D 50 HZ
GRUNDFOS DATA BOOKLET CRN32-2-2 A-F-G-E-HQQE 3x4D 5 HZ Grundfos Pump 96122352 Thank you for your interest in our products Please contact us for more information, or visit our website http://www.lenntech.com/grundfos/crn32/96122352/crn-32-2-2-a-f-g-e-hqqe.html
More informationMFP14, MFP14S and MFP14SS Automatic Pumps
Page 1 of 6 TI-P136-02 ST Issue 12 Cert. No. LRQ 0963008 ISO 9001, S and SS utomatic Pumps Description The Spirax Sarco automatic pump is a displacement receiver operated by steam or compressed air. It
More informationHigh CATALOG. LESER worldwide. Performance. Flanged Safety Relief Valves Series 441 Series 441 Full nozzle Series XXL Series 444 Series 458
LESER UK Bristol sales@leser.co.uk LESER Germany Hamburg and Hohenwestedt sales@leser.com André Ramseyer AG Flamatt, Switzerland info@ramseyer.ch LESER China Tianjin, Beijing, Shanghai and Shenzhen sales.china@leser.com
More informationRUBBER SLEEVE KNIFE GATE VALVE
RUBBER SLEEVE KNIFE GATE VALVE The model knife gate is a wafer valve designed for a wide range of industrial applications. The double-seated design provides bi-directional shut off. The design of the valve
More informationSpira-trol TM Two-port Control Valves EN Standard KE, KF and KL DN15 to DN300 and ASME Standard KEA, KFA and KLA ½" to 12"
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More information2/2 and 3/2 Way Size 6 Seat Valves
2/2 and 3/2 Way Size 6 Seat Valves Directly operated Interface and subplate dimensions according to DIN 24340 and ISO Line connection port size G 3/8" Cartridge design PN [p max. ] = 315 bar 7501856.06.12.08
More informationPPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES
PPS-PPQ-BT-PIAS RESIN INSULATORS FOR OIL INSULATED ELECTRICAL MACHINES BUSHING WITH PLUG CONNECTION WITH OUTER CONE PPS CHARACTERISTICS The PPS bushing can be used as a fixed section for the entry of medium
More informationFlow switches Series AD/VH
Flow switches Flow switch and indicator for liquids and gases Suitable for clear, opaque or turbid liquids (series AD & VH), and for gases (series AD) Flow switching by means of magnetic coupling, watertight,
More information3/2-way Solenoid Valve, direct-acting, NC or NO
3/2-way Solenoid Valve, direct-acting, NC or NO Electrical connection cable plug, Form A With or without manual override as standard Threaded port and sub-base s Impulse optional Type 6014 can be combined
More informationINSTALLATION, OPERATION & MAINTENANCE MANUAL
INSTALLATION, OPERATION & MAINTENANCE MANUAL Flanged Disk Check Valve with Strainer Ref. GENEBRE: 2450 2451 2452 1 INSTRUCTIONS FOR INSTALLATION, OPERATION & MAINTENANCE MANUAL 1. Spare parts... 3 1.1
More informationSolenoid valves Type EVU
Data sheet Solenoid valves EVU EVU solenoid valves are designed to fit into compact refrigeration systems. Available in direct and pilot operated versions, they can be applied in liquid, suction, and hot
More informationPlastic tube flowmeters Series PT/PS
Plastic tube flowmeters Variable area flowmeter for liquids and gases Low cost, excellent readability and light weight Simple installation (flanged, threaded or socket ends for solvent or fusion welding
More informationORLANDO srl. M P R 50 025 OPTIMA Radial pressure gauges for swimming-pools 0-2,5 Bar
Chiavari (Ge) - Italia Tel.: Italia + 0185 + 38.50.10 Fax: Italia + 0185 + 38.50.11 e-mail: orlando@orlando.it Http://www.orlando.it M R 50...: Radial pressure gauge ø 50 ( available scale in bar: 4, 6,10,12,16
More informationSingle Disc Check Valves
Single Disc Check Valves 01 Profile FLOVEL Valves Pvt. Ltd., earlier known as rpita Enterprise, has been manufacturing Check Valves since 1984. It is committed to manufacture high performance Check Valves
More information2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES
2 WAY (2/2) AND 3 WAY (3/2) BRASS AND STAINLESS STEEL SOLENOID VALVES DIRECT ACTING Brochure N-289 SPECIFICATIONS Port Size: 1/8 and1/4 Solenoid Valve for air, oil, water and other fluids Flow Direction:
More informationCHEXTER TM FITS YOUR APPLICATION, PROFITABLY
CHEXTER TM FITS YOUR APPLICATION, PROFITABLY Commercial Construction CHEXTER TM Check Valves are economically used in chilled and hot water air conditioning systems, refrigeration and other piping and
More informationButterfly Valves PN 6/10/16 for flanged connection
4 136 ACVATIX Butterfly Valves PN 6/10/16 for flanged connection tight-closing VKF46.. VKF46..TS Grey cast iron housing EN-GJL-250 (to DN 300) nodular cast iron housing EN-GJS-400-15 (from DN 350) DN 40
More informationKämmer Series 185000 Laboratory Valves
flowserve.com Kämmer Series 185000 Laboratory Valves Description Kämmer microflow series 185000 / 285000 and 187000 / 287000 are ½" laboratory valves designed for precision controlling. The bodies in stainless
More informationNELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE
NELES SOFT SEATED BUTTERFLY VALVE SERIES MAPAG BA FOR PSA PLANT ON/OFF AND CONTROL SERVICE Series Mapag BA is a wafer type butterfly valve with a one piece body and soft seat.. It is specially designed
More informationWafer, Semi-Lug, Lug and Double Flanged Type
Wafer, Semi-Lug, Lug and Double Flanged Type Page 1 www.globalvalvecenter.com 2011 Description The centric replaceable liner butterfly valve is capable of bi-directional flow and bubble tight shut-off
More informationPneumatic actuators The Original! Technics of the top class.
Automatic valves Actuators Accessories Pneumatic actuators The Original! Technics of the top class. Leaflet no. S1-01e-13 Table of contents Advantages and your benefits...page 3 Figure: actuator...page
More informationThermostatic actuator RAVV - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) Description RAVV can be combined with 2-way valves RAV- /8, VMT-/8 or VMA 15. Controller closes on rising temperature. There is a special
More informationPRESSURE REDUCING CONTROL VALVE
Schematics Throttles to reduce high upstream pressure to constant lower downstream pressure Low Flow By-Pass controls at low flows 4 PRESSURE REDUCING CONTROL VALVE with LOW FLOW BY-PASS FEATURE Main Line
More information4 Posiflow Proportional Solenoid Valves
4 Posiflow Solenoid Brass or Stainless Steel Bodies 1/4" to 1/2" NPT 2/2 Features Flow rates adjustable between 0% and 100% of rating Flow rate can also be regulated by a range of electrical inputs (sensors,
More informationSeries 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve
Series 240 Type 3244-1 and Type 3244-7 Pneumatic Control Valves Type 3244 Three-way Valve DIN and ANSI versions Application Mixing or diverting valve for process engineering and industrial applications
More informationSelf-contained valve functions as integral check valve, flow sensing element and bypass control valve.
Self-contained valve functions as integral check valve, flow sensing element and bypass control valve. Features Eliminates high cost of installation and maintenance of complex conventional flow control
More information2-Port Self-acting Temperature Control Valve Selection for Heating and Cooling Applications
Page 1 of 12 TI-S21-07 CH Issue 1 Cert. No. LRQ 0963008 ISO 9001 2-Port Self-acting Temperature Control Valve Selection How to select a system Valve selection: 1. Is the application for heating or cooling?
More informationCSF16 and CSF16T Stainless Steel Steam Filters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPlate heat exchanger. Applications General heating and cooling duties. Heating by means of steam.
M3 Plate heat exchanger Applications General heating and cooling duties. Heating by means of steam. Standard design The plate heat exchanger consists of a pack of corrugated metal plates with portholes
More informationHow To Use A Flowmeter
INLINE flowmeter for continuous flow measurement Economic integration in pipe systems without any additional piping 3-wire frequency pulse version to directly interface with PLC s (both PNP and NPN) Connection
More informationSITRANS F flowmeters SITRANS F M
Overview Integration The complete flowmeter consists of a flow sensor and an associated transmitter MAG 5000, 6000 or 6000 I. The flexible communication concept USM II simplifies integration and update
More informationBUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE
CATALOGUE 2012 - PART 2 WATER TREATMENT BUTTERFLY VALVES API 609 WAFER LUG U-SECTION BODY STYLE DIAPHRAGM VALVES EN13397:2000 WEIR BODY STYLE DIAPHRAGM VALVES EN13397:2000 STRAIGHT- THROUGH BODY STYLE
More informationDiaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter
Ed.15.01 Design Diaphragm Seal with flush diaphragm and flange acc.to SMS. Completed with pressure gauge in stainless steel, liquid filled or pressure transmitter Standard 4026/60H Pressure rate PN 40
More informationDigital inductive conductivity transmitter
Digital inductive conductivity transmitter Optimal solution for conductivity measurements in difficult fluids (polluted, dirty,...) PEEK/PPA version for CIP applications Large range of process connections
More informationSeries 3240 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) and Type 3241/3277 (241-7)
Series 32 Globe Control Valve Type 3241 (241) Pneumatic Control Valves Type 3241/3271 (241-1) Type 3241/3277 (241-7) Application Control valve for process engineering plants with industrial requirements.
More informationKF Needle & Gauge Valves
KF Needle & Gauge Valves Superior Fluid Control Products KF O-Ring & Packed Stem Style Needle Valves KF Needle Valves combine rugged construction, dependability and leak-free performance at high and low
More informationM & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves
M & S Sikkerheds - og Overtryksventiler/ M & S Safety - and Relief Valves - Side 1. Issue AB:06-2012 255 HyCom Fjedersikkerhedsventil / HyCom-Safety Valve Spring Loaded - Manuel / Manual - For gasarter,
More informationARI-ASTRA / ASTRA Plus Combinend flow regulating valve
ARI-ASTRA - Free of maintenance combinend flow regulating valve - soft sealed (to 120 C) ARI-ASTRA Plus - Free of maintenance combinend flow regulating valve (to 175 C resp. 350 C) ARI-ASTRA / ASTRA Plus
More informationInstructions Manual. Electromagnetic sensor Series FLOMID FX. instrumentation for fluids. R-MI-FlomidFX Rev.: 0 English version
instrumentation for fluids Electromagnetic sensor Series FLOMID FX Instructions Manual! Conforms with the Pressure Equipment Directive 97/23/EC. 0830 This equipment is considered as being a pressure accessory
More informationBall valve C 16 valve ball completely moulded in place, extremely low clearance volume, high k v value
Ball valve C valve ball completely moulded in place, extremely low clearance volume, high k v value Advantage maximum safety due to valve ball completely moulded in place - ball and ball seat cannot be
More informationSV615 Safety Valve. 1. Safety information. 2. Product information. 3. Supply. 4. Handling. 5. Before fitting the valve. 6.
3160050/12 IM-P316-03 CH Issue 12 SV615 Safety Valve Installation and Maintenance Instructions 1. Safety information 2. Product information 3. Supply 4. Handling 5. Before fitting the valve 6. Installation
More informationV47 Series Temperature Actuated Modulating Water Valves
V47 Series Temperature Actuated Modulating Water Valves Master Catalog 125 Valves, Miscellaneous (Other Than Gas) Section V Product Bulletin V47 Issue Date 0286 Application The V47 modulating valves regulate
More informationBaumann 87000 Flexsleev Sanitary Control Valve
Product Bulletin D103345X012 Baumann 87000 Flexsleev Sanitary Control Valve The Baumann 87000 control valve (figures 1 and 2) is excellent for throttling high purity liquid or gaseous media commonly found
More informationFisher CV500 Rotary Globe Control Valve
CV500 Valve D101606012 Product Bulletin Fisher CV500 Rotary Globe Control Valve The Fisher CV500 Cam Vee-Ball control valve combines the rangeability of the cammed-segmented V-notched ball, with the inherent
More informationType 3353 Angle Seat Valve
Type 3353 Angle Seat Valve Application On/off valve with pneumatic piston actuator Nominal size DN 15 to 50 (NPS ½ to 2) Nominal pressure PN Temperature range 10 to 180 C Globe valve with an angle seat
More informationAIR-AIR PRESSURE MULTIPLIER (BOOSTER)
AIR-AIR PRESSURE MULTIPLIER (BOOSTER) The air-air pressure multiplier, or booster, is an automatic device that compresses air to give an outlet pressure that is double the inlet pressure. It is normally
More information61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve
61W - Wafer style resilient seated butterfly valve 61L - Lugged style resilient seated butterfly valve Features Rounded polished disc edge gives full concentric sealing, lower torques, longer seat life
More informationkymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
More informationBURSTCHECK LINE OF RUPTURE DISC BURST INDICATORS
BURSTCHECK LINE OF RUPTURE DISC BURST INDICATORS INTRODUCTION Rupture discs are often used as primary pressure relief devices and to isolate pressure relief valves. When used as a primary pressure relief
More informationBALL VALVES TECHNICAL CATALOGUE
SITINDUSTRIE VALVO VALVES BALL VALVES Ed. 01/NOV-2004 SITINDUSTRIE reserves the right to change, without notice, 1/16 SITINDUSTRIE VALVE DIVISION We are pleased to introduce you to the ball valves manufactured
More informationHOPPER SHAPE KNIFE GATE VALVE
HOPPER SHAPE KNIFE GATE VALVE The model knife gate is a uni-directional wafer valve designed for industrial bulk handling service applications (powdered and granular products). The special design of the
More informationSystem 8. ü www.nassmagnet.com ( +49 511 6746-0. System 8
System 8 ü www.nassmagnet.com ( +9 11 7-0 System 8 The name System 8 stands for a modular system of solenoid coils, armature systems, solenoid operators and solenoid valves. The diameter of the armatures
More informationTelescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001
Telescoping Post Indicator Wall Post KENNEDY VALVE ISO 9000 ISO 14001 Telescoping Post Indicator 2945 A 1" SQUARE STEM 9" MAX. = 10" MIN. = 7" FIELD ADJUSTMENT INSTRUCTIONS 1. Remove the top section from
More informationCompact pressure switch Flameproof enclosure Ex d Model PCA
Mechatronic pressure measurement Compact pressure switch Flameproof enclosure Ex d Model PCA WIKA data sheet PV 33.31 for further approvals see page 4 Process Compact Series Applications Pressure monitoring
More information1301 Series High-Pressure Regulators
1301 Series High-Pressure Regulators Bulletin 71.1:1301 December 2013 P10 Figure 1. Type 1301F Regulator Features Durable Stainless Steel Diaphragm For high-outlet pressure applications. Spare Valve Disk
More informationMustang Series PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE. M115-2 (Globe) M1115-2 (Angle) Schematic. Standard Components
Schematic Throttles to reduce high upstream pressure to constant lower downstream pressure Throttles to maintain minimum upstream pressure PRESSURE REDUCING CONTROL VALVE WITH PRESSURE SUSTAINING FEATURE
More information1.1 Z 011-A WAFER PATTERN BUTTERFLY TYP Z 011-A TECHNICAL DATA
WAFER PATTERN BUTTERFY TYP Z 0-A TECNICA DATA A universally applicable wafer type valve acc. to EN 3. The large variety of basic materials allows applications in different industries. Nominal diameter:
More informationRING TYPE JOINT GASKETS
RING TYPE JOINT GASKETS 05.07 GLOBAL RESOURCE FLEXITALLIC, A WORLDWIDE ORGANIZATION LOCAL SERVICE COMMITTED TO MEETING CUSTOMER NEEDS COMPREHENSIVE PRODUCT RANGE FOR ALL INDUSTRIAL AND PETROCHEMICAL APPLICATIONS
More informationOPTIMASS 6000 Technical Datasheet
OPTIMASS 6000 Technical Datasheet Sensor for mass flow The high performance meter for process industries Cryogenic, high temperature and high pressure options Supreme liquid and gas performance with CT
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationVAD Variable Area Desuperheaters
Local regulations may restrict the use of this product to below the conditions quoted. In the interests of development and improvement of the product, we reserve the right to change the specification without
More informationPLATE HEAT EXCHANGER. Installation Manual. Customer Name: Serial number: Purchase order number: Project:
PLATE HEAT EXCHANGER Installation Manual Customer Name: Serial number: Purchase order number: Project: Table of Contents ----------------------------------------------------------------- Page: 2 3 Name
More informationBypass level indicator With magnetic display Model BNA
Level measurement Bypass level indicator With magnetic display Model BNA WIKA data sheet LM 10.01 Applications Continuous level indication without power supply Indication of the level proportional to height
More informationThermostatic actuator RAVI - for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16)
- for 2-way valves RAV-/8 (PN 10), VMT-/8 (PN 10), VMA (PN 16) - for 3-way valves KOVM (PN 10), VMV (PN 16) Description RAVI is self-acting thermostatic actuator primarily for use for temperature control
More informationFLANGED END BALL VALVE
Specification: FLANGED END BALL VALVE - Chem Oil s two-piece ball valve has been designed to handle extreme service applications with unsurpassed reliability. Valve body machined from solid wrought material
More informationBaumann 24000 Little Scotty Bronze Control Valve
24000 Valve Product Bulletin Baumann 24000 Little Scotty Bronze Control Valve Baumann Little Scotty industrial control valves are intended for general utility service in pressure, flow, and temperature
More informationFisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation
Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...
More informationStainless Steel Single and Dual Circulation Kits
Instruction Sheet P/N 160780 01 Stainless Steel Single and Dual Circulation Kits Introduction The single and dual high-pressure circulation kits allow you to vary and control the circulation rate of coating
More information27 July 2009 I 54-1.65.25-63/08. Klenk GmbH Eichelstraße 15, D-88285 Bodnegg-Rotheidlen
General Technical Approval German Institute for Construction Engineering PUBLIC-LAW INSTITUTION Approval body for construction products and types of construction German Construction Industry Inspection
More informationCustom configuration such as modified angle dimensions, other flange standards, 3-way function, alternative materials.are available on request.
LEAKVALVE: HIGHLIGHTS The core of this valve is a diaphragm in stainless steel 316L, gold plated. Robust, it cannot be damaged with any normal methods. The dead volume is kept as small as possible. There
More informationENERGYPETROL S.A. STOCK DE MATERIALES PARA ENTREGA INMEDIATA SALVO VENTA PREVIA
1 GA01011XU-3" Gate Valve 3" ANSI 150 RF Flanged Carbon Steel Body per ASME B16.5 and Bonnet ASTM A216 Gr WCB,, OS&Y, Bolted Bonnet, Flexible Wedge Gate, trim 8 and HF Stellited Seats. Gear operated. With
More informationABsOlute flow control. SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES
ABsOlute flow control SERIES 3E // DN 150-400 (6-16 ) // Oil & Gas // Power Generation // Petrochemistry TRIPLE OFFSET BUTTERFLY VALVES GENERAL INFORMATION GENERAL CHARACTERISTICS Triple offset design
More informationREGULATORS 175/153 Series
175/153 Series 175 HEATING 153 COOLING Watson McDaniel reserves the right to change the designs and/or materials of its products without notice. 2002 Watson McDaniel Company Revised 7/2002 175 / 153 Screwed
More informationSLAM-SHUT VALVE. Type OSE. Europe, Middle East, Africa and Asia Pacific Documents Only. Process Management TM
SLAM-SHUT VALVE Type OSE Process Management TM DESCRIPTION The purpose of the OSE slam shut valve is to totally and rapidly cut off gas flow when the outlet pressure exceeds or drops below the setting.
More information